If JOBS is not by user perf tries to autodetect the number by grepping
the number of CPUs from /proc/cpuinfo. 'grep -c' will always return an
integer so after this command JOBS should be compared to 0, not "".
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424303971-91904-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_time_to_tsc and tsc_to_perf_time functions are only used for x86.
Make inclusion of tsc.c dependent on x86 as well.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1424370153-128274-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf.data file is obtained using 'perf record -b', perf report
should use branch stack mode to generate output. But this function is
broken by improper comparison between boolean and constant -1.
before this patch:
$ perf report -b -i perf.data
Samples: 16 of event 'cycles', Event count (approx.): 3171896
Overhead Command Shared Object Symbol
13.59% ls [kernel.kallsyms] [k] prio_tree_remove
13.16% ls [kernel.kallsyms] [k] change_pte_range
12.09% ls [kernel.kallsyms] [k] page_fault
12.02% ls [kernel.kallsyms] [k] zap_pte_range
...
after this patch:
$ perf report -b -i perf.data
Samples: 256 of event 'cycles', Event count (approx.): 256
Overhead Command Source Shared Object Source Symbol Target Shared Object Target Symbol
9.38% ls [unknown] [k] 0000000000000000 [unknown] [k] 0000000000000000
6.25% ls libc-2.19.so [.] _dl_addr libc-2.19.so [.] _dl_addr
6.25% ls [kernel.kallsyms] [k] zap_pte_range [kernel.kallsyms] [k] zap_pte_range
6.25% ls [kernel.kallsyms] [k] change_pte_range [kernel.kallsyms] [k] change_pte_range
0.39% ls [kernel.kallsyms] [k] prio_tree_remove [kernel.kallsyms] [k] prio_tree_remove
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423967617-28879-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show usage if no action is specified or unexpected parameter is given.
In other words, be more user friendly.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045030.1999.44006.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use pr_debug instead of the combination of verbose and pr_info.
"if (verbose) pr_info(...)" is same as "pr_debug(...)", replace it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045028.1999.93137.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --purge FILE to remove all caches of FILE.
Since the current --remove FILE removes a cache which has
same build-id of given FILE. Since the command takes a
FILE path, it can confuse user who tries to remove cache
about FILE path.
-----
# ./perf buildid-cache -v --add ./perf
Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --remove ./perf
Removing 305bbd1be68f66eca7e2d78db294653031edfa79 ./perf: FAIL
./perf wasn't in the cache
-----
Actually, the --remove's FAIL is not shown, it just silently fails.
So, this patch adds --purge FILE action for such usecase.
perf buildid-cache --purge FILE removes all caches which has same FILE
path.
In other words, it removes all caches including old binaries.
-----
# ./perf buildid-cache -v --add ./perf
Adding 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
# (update the ./perf binary)
# ./perf buildid-cache -v --purge ./perf
Removing 133b7b5486d987a5ab5c3ebf4ea14941f45d4d4f ./perf: Ok
-----
BTW, if you want to purge all the caches, remove ~/.debug/* .
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150227045026.1999.64084.stgit@localhost.localdomain
[ s/dirname/dir_name/g to fix build on fedora14, where dirname is a global ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf-completion.sh uses a predefined string '--help --version
--exec-path --html-path --paginate --no-pager --perf-dir --work-tree
--debugfs-dir' for the bash completion of 'perf --*', which has two
problems:
Problem 1: If the options of perf are changed (see handle_options() in
perf.c), the perf-completion.sh has to be changed at the same time. If
not, the bash completion of 'perf --*' and the options which perf
really supports will be inconsistent.
Problem 2: When typing another single character after 'perf --', e.g.
'h', and hit TAB key to get the bash completion of 'perf --h', the
character 'h' disappears at once. This is not what we want, we wish the
bash completion can return '--help --html-path' and then we can
continue to choose one.
To solve this problem, we add '--list-opts' to perf, which now supports
'perf --list-opts' directly, and its result can be used in bash
completion now.
Example:
Before this patch:
$ perf --h <-- hit TAB key after character 'h'
$ perf -- <-- 'h' disappears and no required result
After this patch:
$ perf --h <-- hit TAB key after character 'h'
--help --html-path <-- the required result
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend 'perf list --raw-dump' to 'perf list --raw-dump [hw|sw|cache
|tracepoint|pmu|event_glob]' in order to show the raw-dump of a certain
kind of events rather than all of the events.
Example:
Before this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
alignment-faults context-switches cpu-clock cpu-migrations
emulation-faults major-faults minor-faults page-faults task-clock
...
...
writeback:writeback_thread_start writeback:writeback_thread_stop
writeback:writeback_wait_iff_congested
writeback:writeback_wake_background writeback:writeback_wake_thread
As shown above, all of the events are printed.
After this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
As shown above, only the hw events are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not need print_events_type or __print_events_type for listing hw/sw
events, let print_symbol_events do its job instead. Moreover,
print_symbol_events can also handle event_glob and name_only.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the long_name of a 'struct option' is defined as NULL, --list-opts
will incorrectly print '--(null)' in its output. As a result, '--(null)'
will finally appear in the case of bash completion, e.g. 'perf record
--'.
Example:
Before this patch:
$ perf record --list-opts
--event --filter --pid --tid --realtime --no-buffering --raw-samples
--all-cpus --cpu --count --output --no-inherit --freq --mmap-pages
--group --(null) --call-graph --verbose --quiet --stat --data
--timestamp --period --no-samples --no-buildid-cache --no-buildid
--cgroup --delay --uid --branch-any --branch-filter --weight
--transaction --per-thread --intr-regs
After this patch:
$ perf record --list-opts
--event --filter --pid --tid --realtime --no-buffering --raw-samples
--all-cpus --cpu --count --output --no-inherit --freq --mmap-pages
--group --call-graph --verbose --quiet --stat --data --timestamp
--period --no-samples --no-buildid-cache --no-buildid --cgroup --delay
--uid --branch-any --branch-filter --weight --transaction --per-thread
--intr-regs
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Distinguish the output of 'perf list --list-opts' or 'perf --list-cmds'
with the next command prompt, which also happens in other cases (e.g.
record, report ...).
Example:
Before this patch:
$perf list --list-opts
--raw-dump $ <-- the output and the next command prompt are at
the same line
After this patch:
$perf list --list-opts
--raw-dump
$ <-- the new line
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If somebody happens to name an event with the beginning of 'tracepoint'
(e.g. tracepoint_foo), then it will never be showed with perf list
event_glob, thus we parse the argument 'tracepoint' more carefully for
accuracy.
Example:
Before this patch:
$ perf list tracepoint_foo:*
jbd2:jbd2_start_commit [Tracepoint event]
jbd2:jbd2_commit_locking [Tracepoint event]
jbd2:jbd2_run_stats [Tracepoint event]
block:block_rq_issue [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_backmerge [Tracepoint event]
block:block_getrq [Tracepoint event]
... ...
As shown above, all of the tracepoint events are printed. In fact, the
command's real intention is to print the events of tracepoint_foo.
After this patch:
$ perf list tracepoint_foo:*
tracepoint_foo:tp_foo_enter [Tracepoint event]
tracepoint_foo:tp_foo_exit [Tracepoint event]
As shown above, only the events of tracepoint_foo are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent new patch "perf tools: Add new 'perf data' command" (commit
2245bf14 in acme's git repo perf/core) has caused a building error when
compiling the source code of perf:
cc1: warnings being treated as errors
builtin-data.c:89: error: missing initializer
builtin-data.c:89: error: (near initialization for ‘data_cmds[1].summary’)
make[2]: *** [builtin-data.o] Error 1
make[2]: *** Waiting for unfinished jobs....
LD bench/perf-in.o
LD tests/perf-in.o
make[1]: *** [perf-in.o] Error 2
make: *** [all] Error 2
This patch fixes the building error above.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425038026-27604-1-git-send-email-yunlong.song@huawei.com
[ .name == NULL ends the loop, use it instead of seting all fields to NULL ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The minus operator has higher precedence than ?: Add parentheses around
?: fix this.
Before this patch:
$ echo 'p:myprobe do_sys_open' > /sys/kernel/debug/tracing/kprobe_events
$ perf probe -l -k ../vmlinux
kprobes:myprobe (on do_sys_open)
After this patch:
$ echo 'p:myprobe do_sys_open' > /sys/kernel/debug/tracing/kprobe_events
$ perf probe -l -k ../vmlinux
kprobes:myprobe (on do_sys_open@linux.git/fs/open.c)
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425034373-14511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the perf diff only works with same binaries. That's because
it compares the symbol start address. It doesn't work if the perf.data
comes from different binaries. This patch matches the symbol names.
Actually, perf diff once intended to compare the symbol names. The
commit as below can look for a pair by name.
604c5c9297 (perf diff: Change the default sort order to "dso,symbol")
However, at that time, perf diff used a global list of dsos. That means
the binaries which has same name can only be loaded once. That's a
problem for comparing different binaries.
For example, we have an old binary and an updated binary. They very
likely have same name and most of the functions, so only dsos from old
binary will be loaded. When processing the data from updated binary,
perf still use the symbol information from old binary. That's wrong.
Then the commit as below used IP to replace symbol name.
9c443dfdd3 ("perf diff: Fix support for all --sort combinations")
>From that time, perf diff starts to compare the symbol address.
The global dsos is discarded from a patch in 2010.
a1645ce12a ("perf: 'perf kvm' tool for monitoring guest performance
from host")
However, at that time, perf diff already compared by address. So perf
diff cannot work for different binaries as well.
This patch actually rolls back the perf diff to original design. The
document is also changed, so everybody knows the original design is to
compare the symbol names.
Here are some examples:
The only difference between example_v1.c and example_v2.c is the
location of f2 and f3. There is no change in behavior, but the previous
perf diff display the wrong differential profile.
example_v1.c
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
example_v2.c
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
[lk@localhost perf_diff]$ gcc example_v1.c -o example
[lk@localhost perf_diff]$ perf record -o example_v1.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.813 MB example_v1.data (~35522 samples) ]
[lk@localhost perf_diff]$ gcc example_v2.c -o example
[lk@localhost perf_diff]$ perf record -o example_v2.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.824 MB example_v2.data (~36015 samples) ]
Old perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
Event 'cycles'
Baseline Delta Shared Object Symbol
........ ....... ................ ...............................
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% example [.] f2
53.71% -7.55% example [.] f3
+53.81% example [.] f3
0.02% example [.] main
New perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% -0.08% example [.] f2
53.71% +0.11% example [.] f3
0.02% example [.] main
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1423460384-11645-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new buildid cache if the update target file is not cached.
This can happen when an old binary is replaced by new one after caching
the old one. In this case, user sees his operation just failed.
But it does not look straight, since user just pass the binary "path",
not "build-id".
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
./perf wasn't in the cache
#
----
This patch adds given new binary to cache if the new binary is
not cached. So we'll not see the above error.
----
# ./perf buildid-cache --add ./perf
(update ./perf to new binary)
# ./perf buildid-cache --update ./perf
#
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150226065440.23912.1494.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We could end up returning 0 (Ok) with a NULL raw_path. Fix it.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Link: http://lkml.kernel.org/n/tip-l0kcbcg5f4nnzqt01cv42vec@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix get_real_path to free allocated memory when comp_dir is used for
complementing path and getting an error.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150226082504.28125.74506.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recent linux kernel provides a blacklist of the functions which can not
be probed. perf probe can now check this blacklist before setting new
events and indicate better error message for users.
Without this patch,
----
# perf probe --add vmalloc_fault
Added new event:
Failed to write event: Invalid argument
Error: Failed to add events.
----
With this patch
----
# perf probe --add vmalloc_fault
Added new event:
Warning: Skipped probing on blacklisted function: vmalloc_fault
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150219143113.14434.5387.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Sparc64 perf-trace is failing in many spots due to extended load
instructions being used on misaligned accesses.
(gdb) run trace ls
Starting program: /tmp/perf/perf trace ls
[Thread debugging using libthread_db enabled]
Detaching after fork from child process 169460.
<ls output removed>
Program received signal SIGBUS, Bus error.
0x000000000014f4dc in tp_field__u64 (field=0x4cc700, sample=0x7feffffa098) at builtin-trace.c:61
warning: Source file is more recent than executable.
61 TP_UINT_FIELD(64);
(gdb) bt
0 0x000000000014f4dc in tp_field__u64 (field=0x4cc700, sample=0x7feffffa098) at builtin-trace.c:61
1 0x0000000000156ad4 in trace__sys_exit (trace=0x7feffffc268, evsel=0x4cc580, event=0xfffffc0104912000,
sample=0x7feffffa098) at builtin-trace.c:1701
2 0x0000000000158c14 in trace__run (trace=0x7feffffc268, argc=1, argv=0x7fefffff360) at builtin-trace.c:2160
3 0x000000000015b78c in cmd_trace (argc=1, argv=0x7fefffff360, prefix=0x0) at builtin-trace.c:2609
4 0x0000000000107d94 in run_builtin (p=0x4549c8, argc=2, argv=0x7fefffff360) at perf.c:341
5 0x0000000000108140 in handle_internal_command (argc=2, argv=0x7fefffff360) at perf.c:400
6 0x0000000000108308 in run_argv (argcp=0x7feffffef2c, argv=0x7feffffef20) at perf.c:444
7 0x0000000000108728 in main (argc=2, argv=0x7fefffff360) at perf.c:559
(gdb) p *sample
$1 = {ip = 4391276, pid = 169472, tid = 169472, time = 6303014583281250, addr = 0, id = 72082,
stream_id = 18446744073709551615, period = 1, weight = 0, transaction = 0, cpu = 73, raw_size = 36,
data_src = 84410401, flags = 0, insn_len = 0, raw_data = 0xfffffc010491203c, callchain = 0x0,
branch_stack = 0x0, user_regs = {abi = 0, mask = 0, regs = 0x0, cache_regs = 0x7feffffa098, cache_mask = 0},
intr_regs = {abi = 0, mask = 0, regs = 0x0, cache_regs = 0x7feffffa098, cache_mask = 0}, user_stack = {
offset = 0, size = 0, data = 0x0}, read = {time_enabled = 0, time_running = 0, {group = {nr = 0,
values = 0x0}, one = {value = 0, id = 0}}}}
(gdb) p *field
$2 = {offset = 16, {integer = 0x14f4a8 <tp_field__u64>, pointer = 0x14f4a8 <tp_field__u64>}}
sample->raw_data is guaranteed to not be 8-byte aligned because it is preceded
by the size as a u3. So accessing raw data with an extended load instruction causes
the SIGBUS. Resolve by using memcpy to a temporary variable of appropriate size.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424376022-140608-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New user selectable features:
- Support recording running/enabled time in 'perf record' (Andi Kleen)
- New tool: 'perf data' for converting perf.data to other formats,
initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)
User visible:
- Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
- Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)
- Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)
- Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)
Infrastructure:
- Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)
- Some perf_session untanglement patches, removing the need to pass a
perf_session instance for things that are related to evlists, so that
tools that don't deal with perf.data files like trace in live mode can
make use of the ordered_events class (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU7j2lAAoJEBpxZoYYoA71cxcH/2dqKGTtqucEgKwpOdo8uf5v
uWFtLzHNxJXYYm1kpwxOj3aMIoEfyfTngLgumgzMVdeQ8+rZGWgF7FMz2Gdn0HJi
5CWrT/keZz8iHxA6BI8NBAa4uO8ct4MHjHSsYuO8Fr4zQmQy9vprfl8D44BQFQr9
6C35dTjP8chIUFLxL2Y5Wr1SATeZf+zJJVoGUES1xgk7iMCfgivg6vSQcGmgBbe6
iJBqDpO+10j55X578d5WRV0UMKrHk25RdGBRaB9eA0KowJfKYva744coF7AHOoQR
snc5Ti93w+ssTL6PSp+FFr81kJVOqQk2GaweMcnNpOP5A8SSS+47yicPUZ25Nng=
=wb9I
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New user selectable features:
- Support recording running/enabled time in 'perf record' (Andi Kleen)
- New tool: 'perf data' for converting perf.data to other formats,
initially for the CTF (Common Trace Format) from LTTng (Jiri Olsa, Sebastian Siewior)
User visible changes:
- Only insert blank duration bracket when tracing syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
- Filter out the trace pid when no threads are specified in 'perf trace' (Arnaldo Carvalho de Melo)
- Add 'perf trace' man page entry for --event (Arnaldo Carvalho de Melo)
- Dump stack on segfaults in 'perf trace' (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Introduce set_filter_pid and set_filter_pids methods in the evlist class (Arnaldo Carvalho de Melo)
- Some perf_session untanglement patches, removing the need to pass a
perf_session instance for things that are related to evlists, so that
tools that don't deal with perf.data files like trace in live mode can
make use of the ordered_events class (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The recent build changes cause perf to not compile for sparc64 since the
arch/sparc64/Build file does not exist:
/home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory
Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what
is done for x86_64.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
4886f2ca19 added an arm-64 check, but the EM_AARCH64 macro is not
defined in older releases (e.g., RHEL6). Define if it is not defined.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-top is terminating due to SIGBUS on sparc64. git bisect points to:
commit 8239698603
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Sep 8 13:26:35 2014 -0300
perf evlist: Refcount mmaps
We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.
This commit added 'int refcnt' to struct perf_mmap and the addition makes the
event_copy element no longer 8-byte aligned.
Fix by adding __attribute__((aligned(8))) to the event_copy struct
member.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com
[ Switched from 'int pad;' to using __attribute__, David tested/acked that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f6edb53c49 converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:
$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]
Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.
Needs to go to 3.18 stable tree as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the tracers bring their own id or pid fields and we can end up
having two of them. This patch adds a "perf_" prefix to the 'generic'
fields so we avoid a clash of the member names.
The change is visible in the babeltrace output:
Before:
$ babeltrace ./ctf-data/
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
...
Now:
$ babeltrace ./ctf-data/
[03:19:13.962131936] (+0.000001935) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 114 }
...
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding new 'perf data' command to provide operations over data files.
The 'perf data convert' sub command is coming in following patch, but
there's possibility for other useful commands like 'perf data ls' (to
display perf data file in directory in ls style).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-3-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding feature check for babeltrace library [1], which will be used for
perf data file CTF [2] conversion in following patches.
The babeltrace library is now automatically detected as standard
feature. It's possible to specify LIBBABELTRACE_DIR make variable to
specify location of installed libbabeltrace, like:
$ make LIBBABELTRACE_DIR=/opt/libbabeltrace/
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libbabeltrace: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libunwind
NOTE The installation of the [1] to to used by above make:
$ git clone git://git.efficios.com/babeltrace.git
$ cd babeltrace
$ vim README
$ ./bootstrap
$ ./configure --prefix=/opt/libbabeltrace
$ make prefix=/opt/libbabeltrace
$ sudo make install prefix=/opt/libbabeltrace
Please make sure that the /opt/libbabeltrace/lib directory is in your
LD_LIBRARY_PATH:
$ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib
[1] babeltrace - http://www.efficios.com/babeltrace
[2] Common Trace Format - http://www.efficios.com/ctf
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Added missing babeltrace build instructions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Feature detection for pthread_attr_setaffinity_np was failing, producing
this error:
In file included from bench/futex-hash.c:17:0:
bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’
static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr,
^
In file included from bench/futex.h:72:0,
from bench/futex-hash.c:17:
/usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here
extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr,
^
make[3]: *** [bench/futex-hash.o] Error 1
make[2]: *** [bench] Error 2
make[2]: *** Waiting for unfinished jobs....
This was because compiling test-pthread-attr-setaffinity-np.c
failed due to the function arguments:
test-pthread-attr-setaffinity-np.c: In function ‘main’:
test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull]
ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
^
So fix the arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h is included in order to get the proper
function declaration. Define this in the Makefile.
Without this defined, the feature check fails on a Fedora system with
gcc5 and then the perf build later fails with conflicting prototypes for
the function.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To use in stdio based tools, like 'trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-79kjmerlw6d88csyx1afzwvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To figure out if ordered_events are being used when doing a flush
operation, it is enough to check if there were in fact some events
queued, i.e. look at oe->nr_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1c5r404vy766kt5nflv88uag@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was causing the destination instead of the source to be filled. As
a result, the source was typically all mapped to one zero page, and
hence very cacheable.
Signed-off-by: Bruce Merry <bmerry@ska.ac.za>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150115092022.GA11292@kryton
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All it wants is session->evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w9663gka3jb1j1rfxxd5jcq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For tools that don't deal with perf.data files, thus do not need to
use perf_session.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kglq67gvauq9tak02a4se00r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start to untangle session from delivering samples, as there are
tools that want to use ordered_events and don't use perf_session at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rn4pk3pjxd78sgzrkn19tktp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because we need to use ordered_events in some cases, so we will need to
first have them in a queue, order that queue, and then process the
event.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cmkw9zgoh0z4r218957ftp1a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Forgot to do it when adding the feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mx152b6x9cgknhw91vsyjlnd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to filter multiple pids in trace, i.e. trace itself,
gnome-terminal, X.org, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-frtpkg7qapqwf7asa35wf8am@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To filter out events for a certain pid, for instance, when tracing
system wide, so that the tracer itself doesn't creates an event loop.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-byoia9dzu4gmkdv87etnd9zf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- 'perf trace': Allow mixing with tracepoints and suppressing plain syscalls
(Arnaldo Carvalho de Melo)
Infrastructure:
- Kconfig beachhead (Jiri Olsa)
- Simplify nr_pages validity (Kaixu Xia)
- Fixup header positioning in 'perf list' (Yunlong Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU3mKaAAoJEBpxZoYYoA71qnYH/1h8zqbQosuy/7Mu2tgLROts
2LSK8M+XD4RKdDVRLK95BIKmZfZkBjeOUE+PJIQ6/Mb1BQGBOmmGQ5oydLf2QUFw
5zVAFS8gec7xGvQpITuZEplJQcqm24CHt7qxUwFlh1DnRzN8eRkW2tHZmr5mfOil
hVpTQYpawRg/HIufDvlMU0Umv28JPQyRpfIF2TilkBxUT6KjYJK1QNuoNsgGS4ZL
r8rEpijRNkbmQZXmIDfZzvlzMx2Bwf0wdGf/1Rod1f1HLD4252ZKc07JCujBpvji
rK/oFj2hHx64r5HUQrOudlQ2B5VvlFKnWKnnb5EgL6gtM4moGhKjNHcUjFy1XLk=
=8zWn
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- No need to explicitely enable evsels for workload started from perf, let it
be enabled via perf_event_attr.enable_on_exec, removing some events that take
place in the 'perf trace' before a workload is really started by it.
(Arnaldo Carvalho de Melo)
- Fix to handle optimized not-inlined functions in 'perf probe' (Masami Hiramatsu)
- Update 'perf probe' man page (Masami Hiramatsu)
- 'perf trace': Allow mixing with tracepoints and suppressing plain syscalls
(Arnaldo Carvalho de Melo)
Infrastructure changes:
- Introduce {trace_seq_do,event_format_}_fprintf functions to allow
a default tracepoint field list printer to be used in tools that allows
redirecting output to a file. (Arnaldo Carvalho de Melo)
- The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h, do it to fix the build in some
systems (Josh Boyer)
- Cleanups in 'perf buildid-cache' (Masami Hiramatsu)
- Fix dso cache test case (Namhyung Kim)
- Do Not rely on dso__data_read_offset() to open DSO (Namhyung Kim)
- Make perf aware of tracefs (Steven Rostedt).
- Fix build by defining STT_GNU_IFUNC for glibc 2.9 and older (Vinson Lee)
- AArch64 symbol resolution fixes (Victor Kamensky)
- Kconfig beachhead (Jiri Olsa)
- Simplify nr_pages validity (Kaixu Xia)
- Fixup header positioning in 'perf list' (Yunlong Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to
double-check the implementation.
Then comes the inevitable fixes and cleanups from that work.
Thanks,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ivCe
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio updates from Rusty Russell:
"OK, this has the big virtio 1.0 implementation, as specified by OASIS.
On top of tht is the major rework of lguest, to use PCI and virtio
1.0, to double-check the implementation.
Then comes the inevitable fixes and cleanups from that work"
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits)
virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice.
virtio_net: unconditionally define struct virtio_net_hdr_v1.
tools/lguest: don't use legacy definitions for net device in example launcher.
virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined.
tools/lguest: use common error macros in the example launcher.
tools/lguest: give virtqueues names for better error messages
tools/lguest: more documentation and checking of virtio 1.0 compliance.
lguest: don't look in console features to find emerg_wr.
tools/lguest: don't start devices until DRIVER_OK status set.
tools/lguest: handle indirect partway through chain.
tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI)
tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI)
tools/lguest: rename virtio_pci_cfg_cap field to match spec.
tools/lguest: fix features_accepted logic in example launcher.
tools/lguest: handle device reset correctly in example launcher.
virtual: Documentation: simplify and generalize paravirt_ops.txt
lguest: remove NOTIFY call and eventfd facility.
lguest: remove NOTIFY facility from demonstration launcher.
lguest: use the PCI console device's emerg_wr for early boot messages.
lguest: always put console in PCI slot #1.
...
LBR call stack only has user-space callchains. It is output in the
PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's
still in the form of PERF_SAMPLE_CALLCHAIN.
The perf tool has to handle both data sources to construct a
complete callstack.
For the "perf report -D" option, both lbr and fp information will be
displayed.
A new call chain recording option "lbr" is introduced into the perf
tool for LBR call stack. The user can use --call-graph lbr to get
the call stack information from hardware.
Here are some examples.
When profiling bc(1) on Fedora 19:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd
If enabling LBR, perf report output looks like:
50.36% bc bc [.] bc_divide
|
--- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
33.66% bc bc [.] _one_mult
|
--- _one_mult
bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
7.62% bc bc [.] _bc_do_add
|
--- _bc_do_add
|
|--99.89%-- 0x2000186a8
--0.11%-- [...]
6.83% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
|
|--99.94%-- bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
--0.06%-- [...]
0.46% bc libc-2.17.so [.] __memset_sse2
|
--- __memset_sse2
|
|--54.13%-- bc_new_num
| |
| |--51.00%-- bc_divide
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| |--30.46%-- _bc_do_sub
| | bc_add
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| --18.55%-- _bc_do_add
| bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
|
--45.87%-- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
If using FP, perf report output looks like:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd
50.49% bc bc [.] bc_divide
|
--- bc_divide
33.57% bc bc [.] _one_mult
|
--- _one_mult
7.61% bc bc [.] _bc_do_add
|
--- _bc_do_add
0x2000186a8
6.88% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
0.42% bc libc-2.17.so [.] __memcpy_ssse3_back
|
--- __memcpy_ssse3_back
If using LBR, perf report -D output looks like:
3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0
... LBR call chain: nr:8
..... 0: fffffffffffffe00
..... 1: 0000000000408e50
..... 2: 000000000040a458
..... 3: 000000000040562e
..... 4: 0000000000408590
..... 5: 00000000004022c0
..... 6: 00000000004015dd
..... 7: 0000003d1cc21b43
... FP chain: nr:2
..... 0: fffffffffffffe00
..... 1: 0000000000408ea8
... thread: bc:9748
...... dso: /usr/bin/bc
The LBR call stack has the following known limitations:
- Zero length calls are not filtered out by the hardware
- Exception handing such as setjmp/longjmp will have calls/returns not
match
- Pushing different return address onto the stack will have
calls/returns not match
- If callstack is deeper than the LBR, only the last entries are
captured
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, there are two call chain recording options, fp and dwarf.
Haswell has a new feature that utilizes the existing LBR facility to
record call chains. Kernel side LBR support code provides this as a
third option to record call chains. This patch enables the lbr call
stack support on the tooling side.
LBR call stack has some limitations:
- It reuses current LBR facility, so LBR call stack and branch record
can not be enabled at the same time.
- It is only available for user-space callchains.
However, it also offers some advantages:
- LBR call stack can work on user apps which don't have frame-pointers
or dwarf debug info compiled. It is a good alternative when nothing
else works.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1420482185-29830-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here's the big char/misc driver update for 3.20-rc1.
Lots of little things in here, all described in the changelog. Nothing
major or unusual, except maybe the binder selinux stuff, which was all
acked by the proper selinux people and they thought it best to come
through this tree.
All of this has been in linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlTgs80ACgkQMUfUDdst+yn86gCeMLbxANGExVLd+PR46GNsAUQb
SJ4AmgIqrkIz+5LCwZWM02ldbYhPeBVf
=lfmM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc patches from Greg KH:
"Here's the big char/misc driver update for 3.20-rc1.
Lots of little things in here, all described in the changelog.
Nothing major or unusual, except maybe the binder selinux stuff, which
was all acked by the proper selinux people and they thought it best to
come through this tree.
All of this has been in linux-next with no reported issues for a while"
* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
coresight: fix function etm_writel_cp14() parameter order
coresight-etm: remove check for unknown Kconfig macro
coresight: fixing CPU hwid lookup in device tree
coresight: remove the unnecessary function coresight_is_bit_set()
coresight: fix the debug AMBA bus name
coresight: remove the extra spaces
coresight: fix the link between orphan connection and newly added device
coresight: remove the unnecessary replicator property
coresight: fix the replicator subtype value
pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
mcb: Fix error path of mcb_pci_probe
virtio/console: verify device has config space
ti-st: clean up data types (fix harmless memory corruption)
mei: me: release hw from reset only during the reset flow
mei: mask interrupt set bit on clean reset bit
extcon: max77693: Constify struct regmap_config
extcon: adc-jack: Release IIO channel on driver remove
extcon: Remove duplicated include from extcon-class.c
Drivers: hv: vmbus: hv_process_timer_expiration() can be static
Drivers: hv: vmbus: serialize Offer and Rescind offer
...
Here's the big pull request for the USB driver tree for 3.20-rc1.
Nothing major happening here, just lots of gadget driver updates, new
device ids, and a bunch of cleanups.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlTgtrcACgkQMUfUDdst+yn0tACgygJPNvu1l3ukNJCCpWuOErIj
3KsAnjiEXv90DLYJiVLJ4EbLPw0V9wAv
=DrJx
-----END PGP SIGNATURE-----
Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg KH:
"Here's the big pull request for the USB driver tree for 3.20-rc1.
Nothing major happening here, just lots of gadget driver updates, new
device ids, and a bunch of cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits)
usb: musb: fix device hotplug behind hub
usb: dwc2: Fix a bug in reading the endpoint directions from reg.
staging: emxx_udc: fix the build error
usb: Retry port status check on resume to work around RH bugs
Revert "usb: Reset USB-3 devices on USB-3 link bounce"
uhci-hub: use HUB_CHAR_*
usb: kconfig: replace PPC_OF with PPC
ehci-pci: disable for Intel MID platforms (update)
usb: gadget: Kconfig: use bool instead of boolean
usb: musb: blackfin: remove incorrect __exit_p()
USB: fix use-after-free bug in usb_hcd_unlink_urb()
ehci-pci: disable for Intel MID platforms
usb: host: pci_quirks: joing string literals
USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)
USB: usbfs: allow URBs to be reaped after disconnection
cdc-acm: kill unnecessary messages
cdc-acm: add sanity checks
usb: phy: phy-generic: Fix USB PHY gpio reset
usb: dwc2: fix USB core dependencies
usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()
...
- Revert two ACPI EC driver commits, one that broke system suspend
on Acer Aspire S5 and one that depends on it (Rafael J Wysocki).
- Fix a typo leading to an incorrect check in the exynos-ppmu devfreq
driver (Dan Carpenter).
- Add support for one more Broadwell CPU model to intel_idle (Len Brown).
- Fix an obscure problem with state transitions related to interrupts
in the speedstep-smi cpufreq driver (Mikulas Patocka).
- Remove some unnecessary messages related to the "out of memory"
condition from the core PM code (Quentin Lambert).
- Update turbostat parameters and documentation, add support for
one more Broadwell CPU model to it and modify it to skip
printing disabled package C-states (Len Brown).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=y7ew
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are two reverts related to system suspend breakage by one of a
recent commits, a fix for a recently introduced bug in devfreq and a
bunch of other things that didn't make it into my previous pull
request, but otherwise are ready to go.
Specifics:
- Revert two ACPI EC driver commits, one that broke system suspend on
Acer Aspire S5 and one that depends on it (Rafael J Wysocki).
- Fix a typo leading to an incorrect check in the exynos-ppmu devfreq
driver (Dan Carpenter).
- Add support for one more Broadwell CPU model to intel_idle (Len Brown).
- Fix an obscure problem with state transitions related to interrupts
in the speedstep-smi cpufreq driver (Mikulas Patocka).
- Remove some unnecessary messages related to the "out of memory"
condition from the core PM code (Quentin Lambert).
- Update turbostat parameters and documentation, add support for one
more Broadwell CPU model to it and modify it to skip printing
disabled package C-states (Len Brown)"
* tag 'pm+acpi-3.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: event: testing the wrong variable
cpufreq: speedstep-smi: enable interrupts when waiting
PM / OPP / clk: Remove unnecessary OOM message
Revert "ACPI / EC: Add query flushing support"
Revert "ACPI / EC: Add GPE reference counting debugging messages"
tools/power turbostat: support additional Broadwell model
intel_idle: support additional Broadwell model
tools/power turbostat: update parameters, documentation
tools/power turbostat: Skip printing disabled package C-states
The hearer text 'List of pre-defined events (to be used in -e):' is
placed in an improper function, which causes an abnormal output, e.g.
'perf list hw' shows no guiding text at all, and 'perf list hw
L1-dcache*' shows the guiding text incorrectly in the middle of the
output.
Example
Before this patch:
$ perf list hw L1-dcache*
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
List of pre-defined events (to be used in -e): <-- incorrect position
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
After this patch:
$ perf list hw L1-dcache*
List of pre-defined events (to be used in -e): <-- correct position
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the 'segmentation fault' bug of 'perf list --list-cmds', which also
happens in other cases (e.g. record, report ...). This bug happens when
there are no cmds to list at all.
Example:
Before this patch:
$ perf list --list-cmds
Segmentation fault
$
After this patch:
$ perf list --list-cmds
$
As shown above, the result prints nothing rather than a segmentation
fault. The null result means 'perf list' has no cmds to display at this
time.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linux doesn't generate these, but it's perfectly valid according to
a close reading of the spec. I opened virtio spec bug VIRTIO-134 to
make this clearer there, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a demonstration, the lguest launcher is pretty strict, trying to
catch badly behaved drivers. Document this precisely.
A good implementation would *NOT* crash the guest when these happened!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are some (optional) parts we don't implement, but this quotes all
the device requirements from the spec (csd 03, but it should be the same
across all released versions).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patch will insert many quotes from the virtio 1.0 spec; they
make most sense if we copy the spec.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The example launcher doesn't reset the queue_enable like the spec says
we have to. Plus, we should reset the size in case they negotiated
a different (smaller) one.
This is easy to test by unloading and reloading a virtio module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
o Added timings to various parts of the test (build, install,
boot, tests) and report them so that the users can keep
track of changes.
o Josh Poimboeuf fixed the console output to work better with
virtual machine targets.
o Various clean ups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2VT1AAoJEEjnJuOKh9ldfgMH/A4N2zEzRDx/FGgvFVBF/NOl
AlwddMyyUsjolL9w+UGUTtXtyyWZFJWvuELaLYwfMF/qI1S+eAZeRQVStQ9UZhj0
ehjKj5ct8EKVCXgR6GUWvCgzLEbK5AQRPRKAkK9KGDmSdzRP22MU7sFj1ZyXGQCh
qqHMSnShXiXzEipqg6Oee8gC1IQIjskulcbB4IqGNMYNN/WJXiVGZUVsMLatb09i
HXz+8P2lh6u1MWb3EX0YvvrZohKgyYf/17V3Hm0JBxLEAFNOkD6q9BqBCRi9LvcU
5vWA+vcvT6+wjXICL0UmiSZbU/JBD0D6vDkGIAqdluaAvf31gsuNTUrLx6RbW10=
=/rWI
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"The following ktest updates were done:
o Added timings to various parts of the test (build, install, boot,
tests) and report them so that the users can keep track of changes.
o Josh Poimboeuf fixed the console output to work better with virtual
machine targets.
o Various clean ups and fixes"
* tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Place quotes around item variable
ktest: Cleanup terminal on dodie() failure
ktest: Print build,install,boot,test times at success and failure
ktest: Enable user input to the console
ktest: Give console process a dedicated tty
ktest: Rename start_monitor_and_boot to start_monitor_and_install
ktest: Show times for build, install, boot and test
ktest: Restore tty settings after closing console
ktest: Add timings for commands
Move the sparc arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-160hknrqr27c9zf59japw91y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the sh arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsg1j4djtq85jtrqw830f2az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the s390 arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8f5tlfwegkirhir2ffz8nw3i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the powerpc arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nqrtlipvjptdyjfuzlnegqgu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the arm64 arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptqfz1op92yrtccjiww7h1v5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the arm arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7bxhmeh4bjabqsmxu4gl6p0b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the x86 arch objects building under build framework to be included
in the libperf build object.
Adding also arch/$(ARCH)/Build files for the rest of the archs. The
reason for this is that in arch/Build we now do:
+libperf-y += $(ARCH)/
which would make the build to fail on other architectures, because the
build framework requires 'Build' file in nested directories and this
patch adds it only for x86.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5enob06z07m7ew6nzzdmp3n2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf object building under build framework to be included in
the perf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wiiciip2w6ajvj03huqz50xw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the zlib objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cpbb47g82ahpa4yqfr9dcobq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the regs objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hgny792g5x5iaklc34aa57uh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the scripts objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ry8pd41ahwpq9h46i8te33c7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the gtk objects building under build framework.
Add new gtk build object so it's separated from the rest of the code and
could be librarized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cd27z7vww85nxdq37rkjkkbm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
