Rafał Miłecki
9442e5b58e
b43: N-PHY: partly implement SPUR workaround
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:55 -05:00
Rafał Miłecki
bbc6dc121d
b43: N-PHY: save calibration for further restore
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:55 -05:00
Rafał Miłecki
984ff4ffb7
b43: N-PHY: prepare code for reapplying TX cal coeffs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:55 -05:00
Rafał Miłecki
67cbc3ed5b
b43: N-PHY: implement overriding RF control intc
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:55 -05:00
Larry Finger
0866b03c7d
b43/b43legacy: Wake queues in wireless_core_start
...
If b43 or b43legacy are deauthenticated or disconnected, there is a
possibility that a reconnection is tried with the queues stopped in
mac80211. To prevent this, start the queues before setting
STAT_INITIALIZED.
In b43, a similar change has been in place (twice) in the
wireless_core_init() routine. Remove the duplicate and add similar
code to b43legacy.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [2.6.32]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08 16:50:54 -05:00
John W. Linville
6e7e6213e4
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
...
Conflicts:
net/mac80211/scan.c
2010-02-08 16:38:38 -05:00
Larry Finger
b6c3f5be7c
b43: Fix throughput regression
...
Commit c7ab5ef9bc
entitled "b43: implement
short slot and basic rate handling" reduced the transmit throughput for
my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling
portion is OK, the problem is in the short slot handling.
Prior to this change, the short slot enable/disable routines were never
called. Experimentation showed that the critical part was changing the
value at offset 0x0010 in the shared memory. This is supposed to contain
the 802.11 Slot Time in usec, but if it is changed from its initial value
of zero, performance is destroyed. On the other hand, changing the value
in the MMIO register corresponding to the Interframe Slot Time increased
performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic
improvement of the transmit rate from 5.3 to 19.0 Mb/s.
Other changes in the patch include removal of the magic number for the
MMIO register, and allowing the slot time to be set for any PHY operating
in the 2.4 GHz band. Previously, the routine was executed only for G PHYs.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-03 16:55:19 -05:00
Rafał Miłecki
9501fefec6
b43: N-PHY: implement setting RF sequence
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:07 -05:00
Rafał Miłecki
52cb5e978f
b43: N-PHY: add TX radio setup for newer PHYs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:06 -05:00
Rafał Miłecki
38bb902921
b43: N-PHY: fix Cal TX IQ LO for newer PHYs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:06 -05:00
Rafał Miłecki
6e3b15a9e7
b43: N-PHY: add RSSI selection for newer PHYs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:06 -05:00
Rafał Miłecki
99b82c419b
b43: N-PHY: split RSSI selection into two per-PHY-revision functions
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:06 -05:00
Rafał Miłecki
ef5127a4d2
b43: N-PHY: add workarounds for gain control
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:05 -05:00
Rafał Miłecki
28fd7daabf
b43: N-PHY: update general workarounds
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-01 15:40:05 -05:00
Larry Finger
da8604757b
b43: N PHY: Fix compilation after removal of typdef b43_c32
...
In the conversion between typedef and struct, two places that needed a "struct"
were missed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27 15:02:07 -05:00
Rafał Miłecki
f2982181e0
b43: N-PHY: use cordic to generate samples
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25 16:40:36 -05:00
Rafał Miłecki
6f98e62a9f
b43: update cordic code to match current specs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25 16:39:03 -05:00
Rafał Miłecki
9865045403
b43: make cordic common (LP-PHY and N-PHY need it)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25 16:36:31 -05:00
Rafał Miłecki
3ed0fac3b5
b43: N-PHY: fix one bit off in parsing RF Ctrl Override arguments
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25 16:36:29 -05:00
Michael Buesch
96869a3939
b43: Workaround circular locking in hw-tkip key update callback
...
The TKIP key update callback is called from the RX path, where the driver
mutex is already locked. This results in a circular locking bug.
Avoid this by removing the lock.
Johannes noted that there is a separate bug: The callback still breaks on SDIO
hardware, because SDIO hardware access needs to sleep, but we are not allowed
to sleep in the callback due to mac80211's RCU locking.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: kecsa@kutfo.hit.bme.hu
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25 16:36:28 -05:00
Rafał Miłecki
59af099b19
b43: N-PHY: add TX tone
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:11:40 -05:00
Rafał Miłecki
45ca697e60
b43: N-PHY: add setting power amplifier filters
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:11:39 -05:00
Rafał Miłecki
10a798733e
b43: N-PHY: add running samples
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:11:38 -05:00
Rafał Miłecki
75377b2476
b43: N-PHY: implement overriding RF control
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:11:37 -05:00
Rafał Miłecki
aa4c7b2a25
b43: check band width
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:11:34 -05:00
Johannes Berg
b3fbdcf49f
mac80211: pass vif and station to update_tkip_key
...
When a TKIP key is updated, we should pass the station
pointer instead of just the address, since drivers can
use that to store their own data. We also need to pass
the virtual interface pointer.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22 16:08:55 -05:00
Rafał Miłecki
de9a47f927
b43: N-PHY: silence warnings, add missing call
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:49:34 -05:00
Rafał Miłecki
9145834e84
b43: N-PHY: implement and add multi-dimensional table reading
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:47:46 -05:00
Rafał Miłecki
c643a66ef5
b43: N-PHY: implement and add reading one element tables
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:46:36 -05:00
Rafał Miłecki
2581b1434c
b43: N-PHY: implement and add multi-dimensional table writing
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:45:35 -05:00
Rafał Miłecki
d41a3552f9
b43: N-PHY: add writing one element tables
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:44:18 -05:00
Rafał Miłecki
c57199bc32
b43: N-PHY: store seq mode for proper restoring (follow specs)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:43:08 -05:00
Rafał Miłecki
67c0d6e2d1
b43: N-PHY: move RF sequence declarations top, add missing calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:41:44 -05:00
Rafał Miłecki
4f4ab6cd14
b43: N-PHY: implement chain selection
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:39:08 -05:00
Rafał Miłecki
53ae8e8c92
b43: N-PHY: implement stopping playback
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:37:57 -05:00
Rafał Miłecki
ad9716e8e8
b43: N-PHY: implement MIMO config update
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:36:04 -05:00
Rafał Miłecki
e53de67449
b43: N-PHY: implement TX PHY cleanup and setup
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:34:01 -05:00
Rafał Miłecki
026816fce4
b43: N-PHY: implement RX PHY cleanup and setup
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-19 16:31:27 -05:00
Rafał Miłecki
730dd70549
b43: N-PHY: drop unused definition, uncomment needed call
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:44 -05:00
Rafał Miłecki
6dcd9d911c
b43: N-PHY: implement TX power control coef setup
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
15931e318b
b43: N-PHY: add RX IQ calibrationi for rev < 3
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
fb43b8e235
b43: N-PHY: add huge calculating TX IQ LO
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
e9762492f5
b43: N-PHY: implement calculating IQ gain params
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
de7ed0c624
b43: N-PHY: update TX calibration ladder
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
c4a92003b0
b43: N-PHY: add RX radio cores calibration
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:41 -05:00
Rafał Miłecki
fe3e46e881
b43: N-PHY: add TX LP FBW (TX filter 40 related)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
b0022e15cc
b43: N-PHY: implement getting TX gains
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
34a56f2cae
b43: N-PHY: implement calculating RX IQ comp
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
2faa6b832f
b43: N-PHY: implement RX IQ estimation
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00
Rafał Miłecki
2f258b74d1
b43: N-PHY: implement restoring general configuration
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00