In bpf geneve tunnel test we set geneve option on tx side. On rx side we
only call bpf_skb_get_tunnel_opt(). Since commit 9c2e14b481 ("ip_tunnels:
Set tunnel option flag when tunnel metadata is present") geneve_rx() will
not add TUNNEL_GENEVE_OPT flag if there is no geneve option, which cause
bpf_skb_get_tunnel_opt() return ENOENT and _geneve_get_tunnel() in
test_tunnel_kern.c drop the packet.
As it should be valid that bpf_skb_get_tunnel_opt() return error when
there is not tunnel option, there is no need to drop the packet and
break all geneve rx traffic. Just set opt_class to 0 in this test and
keep returning TC_ACT_OK.
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/bpf/20210224081403.1425474-1-liuhangbin@gmail.com
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations,
which aren't used and will be replaced by a different API
-----BEGIN PGP SIGNATURE-----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=papz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
Commit 34b2021cc6 ("bpf: Add BPF-helper for MTU checking") added an extra
blank line in bpf helper description. This will make bpf_helpers_doc.py stop
building bpf_helper_defs.h immediately after bpf_check_mtu(), which will
affect future added functions.
Fixes: 34b2021cc6 ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210223131457.1378978-1-liuhangbin@gmail.com
Older libelf.h and glibc elf.h might not yet define the ELF compression
types.
Checking and defining SHF_COMPRESSED fix the build error when compiling
with older toolchains. Also, the tool resolve_btfids is compiled with host
toolchain. The host toolchain is more likely to be older than the cross
compile toolchain.
Fixes: 51f6463aac ("tools/resolve_btfids: Fix sections with wrong alignment")
Signed-off-by: Kun-Chuan Hsieh <jetswayss@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210224052752.5284-1-jetswayss@gmail.com
Add an explicit 'const void *' cast to pass program ctx pointer type into
a global function that expects pointer to structure.
warning: incompatible pointer types
passing 'struct __sk_buff *' to parameter of type 'const struct S *'
[-Wincompatible-pointer-types]
return foo(skb);
^~~
progs/test_global_func11.c:10:36: note: passing argument to parameter 's' here
__noinline int foo(const struct S *s)
^
Fixes: 8b08807d03 ("selftests/bpf: Add unit tests for pointers in global functions")
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210223082211.302596-1-me@ubique.spb.ru
In order to test ndo_start_xmit being called in parallel, explicitly add
separate tests, which should all run on different cores. This should
help tease out bugs associated with queueing up packets from different
cores in parallel. Currently, it hasn't found those types of bugs, but
given future planned work, this is a useful regression to avoid.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=htKJ
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more clang LTO updates from Kees Cook:
"Clang LTO x86 enablement.
Full disclosure: while this has _not_ been in linux-next (since it
initially looked like the objtool dependencies weren't going to make
v5.12), it has been under daily build and runtime testing by Sami for
quite some time. These x86 portions have been discussed on lkml, with
Peter, Josh, and others helping nail things down.
The bulk of the changes are to get objtool working happily. The rest
of the x86 enablement is very small.
Summary:
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)"
Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/
* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: force rebuilds when switching CONFIG_LTO
x86, build: allow LTO to be selected
x86, cpu: disable LTO for cpu.c
x86, vdso: disable LTO only for vDSO
kbuild: lto: postpone objtool
objtool: Split noinstr validation from --vmlinux
x86, build: use objtool mcount
tracing: add support for objtool mcount
objtool: Don't autodetect vmlinux.o
objtool: Fix __mcount_loc generation with Clang's assembler
objtool: Add a pass for generating __mcount_loc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
This change adds a --noinstr flag to objtool to allow us to specify
that we're processing vmlinux.o without also enabling noinstr
validation. This is needed to avoid false positives with LTO when we
run objtool on vmlinux.o without CONFIG_DEBUG_ENTRY.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
With LTO, we run objtool on vmlinux.o, but don't want noinstr
validation. This change requires --vmlinux to be passed to objtool
explicitly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
When objtool generates relocations for the __mcount_loc section, it
tries to reference __fentry__ calls by their section symbol offset.
However, this fails with Clang's integrated assembler as it may not
generate section symbols for every section. This patch looks up a
function symbol instead if the section symbol is missing, similarly
to commit e81e072443 ("objtool: Support Clang non-section symbols
in ORC generation").
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add the --mcount option for generating __mcount_loc sections
needed for dynamic ftrace. Using this pass requires the kernel to
be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined
in Makefile.
Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[Sami: rebased, dropped config changes, fixed to actually use --mcount,
and wrote a commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
- Make objtool work for big-endian cross compiles
- Make stack tracking via stack pointer memory operations match push/pop
semantics to prepare for architectures w/o PUSH/POP instructions.
- Add support for analyzing alternatives
- Improve retpoline detection and handling
- Improve assembly code coverage on x86
- Provide support for inlined stack switching
-----BEGIN PGP SIGNATURE-----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=0AHf
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Make objtool work for big-endian cross compiles
- Make stack tracking via stack pointer memory operations match
push/pop semantics to prepare for architectures w/o PUSH/POP
instructions.
- Add support for analyzing alternatives
- Improve retpoline detection and handling
- Improve assembly code coverage on x86
- Provide support for inlined stack switching
* tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
objtool: Support stack-swizzle
objtool,x86: Additionally decode: mov %rsp, (%reg)
x86/unwind/orc: Change REG_SP_INDIRECT
x86/power: Support objtool validation in hibernate_asm_64.S
x86/power: Move restore_registers() to top of the file
x86/power: Annotate indirect branches as safe
x86/acpi: Support objtool validation in wakeup_64.S
x86/acpi: Annotate indirect branch as safe
x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S
x86/xen/pvh: Annotate indirect branch as safe
x86/xen: Support objtool vmlinux.o validation in xen-head.S
x86/xen: Support objtool validation in xen-asm.S
objtool: Add xen_start_kernel() to noreturn list
objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC
objtool: Add asm version of STACK_FRAME_NON_STANDARD
objtool: Assume only ELF functions do sibling calls
x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub
objtool: Support retpoline jump detection for vmlinux.o
objtool: Fix ".cold" section suffix check for newer versions of GCC
objtool: Fix retpoline detection in asm code
...
drm userspaces uses this, systemd uses this, makes sense to pull it
out from the checkpoint-restore bundle. Kees reviewed this from
security pov and is happy with the final version.
LWN coverage: https://lwn.net/Articles/845448/
-----BEGIN PGP SIGNATURE-----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=uiSj
-----END PGP SIGNATURE-----
Merge tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm
Pull kcmp kconfig update from Daniel Vetter:
"Make the kcmp syscall available independently of checkpoint/restore.
drm userspaces uses this, systemd uses this, so makes sense to pull it
out from the checkpoint-restore bundle.
Kees reviewed this from security pov and is happy with the final
version"
Link: https://lwn.net/Articles/845448/
* tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
- Update to the way irqs and preemption is tracked via the trace event PC field
- Fix handling of unregistering event failing due to allocate memory.
This is only triggered by failure injection, as it is pretty much guaranteed
to have less than a page allocation succeed.
- Do not show the useless "filter" or "enable" files for the "ftrace" trace
system, as they have no effect on doing anything.
- Add a warning if kprobes are registered more than once.
- Synthetic events now have their fields parsed by semicolons.
Old formats without semicolons will still work, but new features will
require them.
- New option to allow trace events to show %p without hashing in trace file.
The trace file can only be read by root, and reading the raw event buffer
did not have any pointers hashed, so this does not expose anything new.
- New directory in tools called tools/tracing, where a new tool that reads
sequential latency reports from the ftrace latency tracers.
- Other minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYDL2wBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti6AP0RUcSU5U1onx8DcwPQLC5Xr3CPqJkm
RvKeJDdgFP+sVgEAiMTFsy2UMc0gmlHZMFd5nZLSiJCu1I2hHmhS5yKbHgY=
=fD9+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Update to the way irqs and preemption is tracked via the trace event
PC field
- Fix handling of unregistering event failing due to allocate memory.
This is only triggered by failure injection, as it is pretty much
guaranteed to have less than a page allocation succeed.
- Do not show the useless "filter" or "enable" files for the "ftrace"
trace system, as they have no effect on doing anything.
- Add a warning if kprobes are registered more than once.
- Synthetic events now have their fields parsed by semicolons. Old
formats without semicolons will still work, but new features will
require them.
- New option to allow trace events to show %p without hashing in trace
file. The trace file can only be read by root, and reading the raw
event buffer did not have any pointers hashed, so this does not
expose anything new.
- New directory in tools called tools/tracing, where a new tool that
reads sequential latency reports from the ftrace latency tracers.
- Other minor fixes and cleanups.
* tag 'trace-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
kprobes: Fix to delay the kprobes jump optimization
tracing/tools: Add the latency-collector to tools directory
tracing: Make hash-ptr option default
tracing: Add ptr-hash option to show the hashed pointer value
tracing: Update the stage 3 of trace event macro comment
tracing: Show real address for trace event arguments
selftests/ftrace: Add '!event' synthetic event syntax check
selftests/ftrace: Update synthetic event syntax errors
tracing: Add a backward-compatibility check for synthetic event creation
tracing: Update synth command errors
tracing: Rework synthetic event command parsing
tracing/dynevent: Delegate parsing to create function
kprobes: Warn if the kprobe is reregistered
ftrace: Remove unused ftrace_force_update()
tracepoints: Code clean up
tracepoints: Do not punish non static call users
tracepoints: Remove unnecessary "data_args" macro parameter
tracing: Do not create "enable" or "filter" files for ftrace event subsystem
kernel: trace: preemptirq_delay_test: add cpu affinity
tracepoint: Do not fail unregistering a probe due to memory failure
...
- Support instruction latency in 'perf report', with both memory latency
(weight) and instruction latency information, users can locate expensive load
instructions and understand time spent in different stages.
- Extend 'perf c2c' to display the number of loads which were blocked by data
or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as Intel's
Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while providing a way to control
the enablement of events without restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like for other
targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C#
The example above counts 'cycles' and 'ref-cycles' of BPF program of id 254.
It is similar to bpftool-prog-profile command, but more flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO build-id using infrastructure
generalised from the eBPF subsystem, removing the need for traversing the perf.data file
to collect build-ids at the end of 'perf record' sessions and helping with long running
sessions where binaries can get replaced in updates, leading to possible mis-resolution
of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing threads (mmaps, comm, etc),
speeding up the work done at the start of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test' entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop, 'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYDANTQAKCRCyPKLppCJ+
J4veAQCISY1BPHscUTRYhq9cwU/Zs0ImtX7zDT4jxaP39JkduAD/eSqYavAJrtQh
HDyEiTgZ7CQSp5eCbXkzrnet4n3G9QE=
=H/Jk
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Support instruction latency in 'perf report', with both memory
latency (weight) and instruction latency information, users can
locate expensive load instructions and understand time spent in
different stages.
- Extend 'perf c2c' to display the number of loads which were blocked
by data or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as
Intel's Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while
providing a way to control the enablement of events without
restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like
for other targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C
The example above counts 'cycles' and 'ref-cycles' of BPF program
of id 254. It is similar to bpftool-prog-profile command, but more
flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
build-id using infrastructure generalised from the eBPF subsystem,
removing the need for traversing the perf.data file to collect
build-ids at the end of 'perf record' sessions and helping with
long running sessions where binaries can get replaced in updates,
leading to possible mis-resolution of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing
threads (mmaps, comm, etc), speeding up the work done at the start
of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine
and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts
related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop,
'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and
powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of
extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag"
* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
perf buildid-cache: Don't skip 16-byte build-ids
perf buildid-cache: Add test for 16-byte build-id
perf symbol: Remove redundant libbfd checks
perf test: Output the sub testing result in cs-etm
perf test: Suppress logs in cs-etm testing
perf tools: Fix arm64 build error with gcc-11
perf intel-pt: Add documentation for tracing virtual machines
perf intel-pt: Split VM-Entry and VM-Exit branches
perf intel-pt: Adjust sample flags for VM-Exit
perf intel-pt: Allow for a guest kernel address filter
perf intel-pt: Support decoding of guest kernel
perf machine: Factor out machine__idle_thread()
perf machine: Factor out machines__find_guest()
perf intel-pt: Amend decoder to track the NR flag
perf intel-pt: Retain the last PIP packet payload as is
perf intel_pt: Add vmlaunch and vmresume as branches
perf script: Add branch types for VM-Entry and VM-Exit
perf auxtrace: Automatically group aux-output events
perf test: Fix unaligned access in sample parsing test
perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
...
-----BEGIN PGP SIGNATURE-----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=CZnB
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New "no_hash_pointers" kernel parameter causes that %p shows raw
pointer values instead of hashed ones. It is intended only for
debugging purposes. Misuse is prevented by a fat warning message that
is inspired by trace_printk().
- Prevent a possible deadlock when flushing printk_safe buffers during
panic().
- Fix performance regression caused by the lockless printk ringbuffer.
It was visible with huge log buffer and long messages.
- Documentation fix-up.
* tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: no_hash_pointers prints all addresses as unhashed
kselftest: add support for skipped tests
lib: use KSTM_MODULE_GLOBALS macro in kselftest drivers
printk: avoid prb_first_valid_seq() where possible
printk: fix deadlock when kernel panic
printk: rectify kernel-doc for prb_rec_init_wr()
This KUnit update for Linux 5.12-rc1 consists of consists of:
-- support for filtering test suites using glob from Daniel Latypov.
"kunit_filter.glob" command line option is passed to the UML
kernel, which currently only supports filtering by suite name.
This support allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
-- several fixes and cleanups also from Daniel Latypov.
-----BEGIN PGP SIGNATURE-----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=zdch
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan
- support for filtering test suites using glob from Daniel Latypov.
"kunit_filter.glob" command line option is passed to the UML
kernel, which currently only supports filtering by suite name.
This support allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
- several fixes and cleanups also from Daniel Latypov.
* tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix unintentional statefulness in run_kernel()
kunit: tool: add support for filtering suites by glob
kunit: add kunit.filter_glob cmdline option to filter suites
kunit: don't show `1 == 1` in failed assertion messages
kunit: make kunit_tool accept optional path to .kunitconfig fragment
Documentation: kunit: add tips.rst for small examples
KUnit: Docs: make start.rst example Kconfig follow style.rst
kunit: tool: simplify kconfig is_subset_of() logic
minor: kunit: tool: fix unit test so it can run from non-root dir
kunit: tool: use `with open()` in unit test
kunit: tool: stop using bare asserts in unit test
kunit: tool: fix unit test cleanup handling
This Kselftest update for Linux 5.12-rc1 consists of:
- dmabuf-heaps test fixes and cleanups from John Stultz.
- seccomp test fix to accept any valid fd in user_notification_addfd.
- Minor fixes to breakpoints and vDSO tests.
- Minor code cleanups to ipc and x86 tests.
-----BEGIN PGP SIGNATURE-----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=CTFH
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- dmabuf-heaps test fixes and cleanups from John Stultz
- seccomp test fix to accept any valid fd in user_notification_addfd
- Minor fixes to breakpoints and vDSO tests
- Minor code cleanups to ipc and x86 tests
* tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Accept any valid fd in user_notification_addfd
selftests/timens: add futex binary to .gitignore
selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.c
selftests/vDSO: fix ABI selftest on riscv
selftests/x86/ldt_gdt: remove unneeded semicolon
selftests/ipc: remove unneeded semicolon
kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroed
kselftests: dmabuf-heaps: Cleanup test output
kselftests: dmabuf-heaps: Softly fail if don't find a vgem device
kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNC
kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
When objtool encounters the stack-swizzle:
mov %rsp, (%[tos])
mov %[tos], %rsp
...
pop %rsp
Inside a FRAME_POINTER=y build, things go a little screwy because
clearly we're not adjusting the cfa->base. This then results in the
pop %rsp not being detected as a restore of cfa->base so it will turn
into a regular POP and offset the stack, resulting in:
kernel/softirq.o: warning: objtool: do_softirq()+0xdb: return with modified stack frame
Therefore, have "mov %[tos], %rsp" act like a PUSH (it sorta is
anyway) to balance the things out. We're not too concerned with the
actual stack_size for frame-pointer builds, since we don't generate
ORC data for them anyway.
Fixes: aafeb14e9d ("objtool: Support stack-swizzle")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YC6UC+rc9KKmQrkd@hirez.programming.kicks-ass.net
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer to
peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool.
-----BEGIN PGP SIGNATURE-----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=Z4cZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, if not for Lee's 70 patches cleaning the
kdocs it would be well below typical for patch count.
Most of the interesting work here was in the HNS and rxe drivers which
got fairly major internal changes.
Summary:
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
to peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
RDMA/mlx5: Allow CQ creation without attached EQs
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rxe: Remove unused pkt->offset
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
RDMA/qedr: Use true and false for bool variable
RDMA/hns: Adjust definition of FRMR fields
RDMA/hns: Refactor process of posting CMDQ
RDMA/hns: Adjust fields and variables about CMDQ tail/head
RDMA/hns: Remove redundant operations on CMDQ
RDMA/hns: Fixes missing error code of CMDQ
RDMA/hns: Remove unused member and variable of CMDQ
RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
...
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to perform
the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that userspace
programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx as well
as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers from
intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all over the
place
-----BEGIN PGP SIGNATURE-----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=OZtR
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
This code generates a CMPXCHG loop in order to implement atomic_fetch
bitwise operations. Because CMPXCHG is hard-coded to use rax (which
holds the BPF r0 value), it saves the _real_ r0 value into the
internal "ax" temporary register and restores it once the loop is
complete.
In the middle of the loop, the actual bitwise operation is performed
using src_reg. The bug occurs when src_reg is r0: as described above,
r0 has been clobbered and the real r0 value is in the ax register.
Therefore, perform this operation on the ax register instead, when
src_reg is r0.
Fixes: 981f94c3e9 ("bpf: Add bitwise atomic instructions")
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210216125307.1406237-1-jackmanb@google.com
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
=IwMb
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
- nolibc fixes for the torture tests
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=31yj
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"These are the latest RCU updates for v5.12:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide
allocator return addresses to more easily locate bugs. This has a
couple of RCU-related commits, but is mostly MM. Was pulled in with
akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks, which enables
better debugging information and smarter reactions to large numbers
of callbacks.
- The first round of changes to allow CPUs to be runtime switched
from and to callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a
"torture everything" script that runs rcutorture, locktorture,
scftorture, rcuscale, and refscale. Plus does an allmodconfig
build.
- nolibc fixes for the torture tests"
* tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
percpu_ref: Dump mem_dump_obj() info upon reference-count underflow
rcu: Make call_rcu() print mem_dump_obj() info for double-freed callback
mm: Make mem_obj_dump() vmalloc() dumps include start and length
mm: Make mem_dump_obj() handle vmalloc() memory
mm: Make mem_dump_obj() handle NULL and zero-sized pointers
mm: Add mem_dump_obj() to print source of memory block
tools/rcutorture: Fix position of -lgcc in mkinitrd.sh
tools/nolibc: Fix position of -lgcc in the documented example
tools/nolibc: Emit detailed error for missing alternate syscall number definitions
tools/nolibc: Remove incorrect definitions of __ARCH_WANT_*
tools/nolibc: Get timeval, timespec and timezone from linux/time.h
tools/nolibc: Implement poll() based on ppoll()
tools/nolibc: Implement fork() based on clone()
tools/nolibc: Make getpgrp() fall back to getpgid(0)
tools/nolibc: Make dup2() rely on dup3() when available
tools/nolibc: Add the definition for dup()
rcutorture: Add rcutree.use_softirq=0 to RUDE01 and TASKS01
torture: Maintain torture-specific set of CPUs-online books
torture: Clean up after torture-test CPU hotplugging
rcutorture: Make object_debug also double call_rcu() heap object
...
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several
places (Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas).
-----BEGIN PGP SIGNATURE-----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=WpL7
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20210105, fix and clean up the handling of device properties, add
support for setting global profile of the platform, clean up device
enumeration, the CPPC library, the APEI support and more, update the
documentation, consolidate the printing of messages in several places
and make assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Remove the MTMR (Mid-Timer) table (Al Stone).
* Remove the VRTC table (Al Stone).
* Add type casts for string functions (Bob Moore).
* Update all copyrights to 2021 (Bob Moore).
* Fix exception code class checks (Maximilian Luz).
* Clean up exception code class checks (Maximilian Luz).
* Fix -Wfallthrough (Nick Desaulniers).
- Add support for setting and reading global profile of the platform
along with documentation (Mark Pearson, Hans de Goede, Jiaxun
Yang).
- Fix fwnode properties matching and clean up the code handling
device properties and its documentation (Rafael Wysocki, Andy
Shevchenko).
- Clean up ACPI-based device enumeration code (Rafael Wysocki).
- Clean up the CPPC support library code (Ionela Voinescu).
- Clean up the APEI support code (Yang Li, Yazen Ghannam).
- Update GPIO-related properties documentation (Flavio Suligoi).
- Consolidate and clean up the printing of messages in several places
(Rafael Wysocki).
- Fix error code path in configfs handling code (Qinglang Miao).
- Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).
- Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
multiple places (Bjorn Helgaas)"
* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
ACPI: property: Satisfy kernel doc validator (part 2)
ACPI: property: Satisfy kernel doc validator (part 1)
ACPI: property: Make acpi_node_prop_read() static
ACPI: property: Remove dead code
ACPI: property: Fix fwnode string properties matching
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
ACPI: APEI: Add is_generic_error() to identify GHES sources
...
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping
driver and make it use the topology interface when laying out the
system topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep
and PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and
drop DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom
Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and clean
up the code to remove many of the family checks to make future
family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9xhj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new power capping facility allowing aggregate power
constraints to be applied to sets of devices in a distributed manner,
add a new CPU ID to the RAPL power capping driver and improve it, drop
a cpufreq driver belonging to a platform that is not supported any
more, drop two redundant cpufreq driver flags, update cpufreq drivers
(intel_pstate, brcmstb-avs, qcom-hw), update the operating performance
points (OPP) framework (code cleanups, new helpers, devfreq-related
modifications), clean up devfreq, extend the PM clock layer, update
the cpupower utility and make assorted janitorial changes.
Specifics:
- Add new power capping facility called DTPM (Dynamic Thermal Power
Management), based on the existing power capping framework, to
allow aggregate power constraints to be applied to sets of devices
in a distributed manner, along with a CPU backend driver based on
the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).
- Add AlderLake Mobile support to the Intel RAPL power capping driver
and make it use the topology interface when laying out the system
topology (Zhang Rui, Yunfeng Ye).
- Drop the cpufreq tango driver belonging to a platform that is not
supported any more (Arnd Bergmann).
- Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
driver flags (Viresh Kumar).
- Update cpufreq drivers:
* Fix max CPU frequency discovery in the intel_pstate driver and
make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
Christian).
* Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
JAILLET).
* Make the tegra20 driver use the resource-managed API (Dmitry
Osipenko).
* Enable boost support in the qcom-hw driver (Shawn Guo).
- Update the operating performance points (OPP) framework:
* Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).
* Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
Viresh Kumar).
* Allow required OPPs to be used for devfreq devices and update
the devfreq governor code accordingly (Saravana Kannan).
* Prepare the framework for introducing new dev_pm_opp_set_opp()
helper (Viresh Kumar).
* Drop dev_pm_opp_set_bw() and update related drivers (Viresh
Kumar).
* Allow lazy linking of required-OPPs (Viresh Kumar).
- Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
Pierre Kuo).
- Update the generic power domains (genpd) framework:
* Use device's next wakeup to determine domain idle state (Lina
Iyer).
* Improve initialization and debug (Dmitry Osipenko).
* Simplify computations (Abaci Team).
- Make janitorial changes in the core code handling system sleep and
PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
Zqiang).
- Update the MAINTAINERS entry for the exynos cpuidle driver and drop
DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix).
- Extend the PM clock layer to cover clocks that must sleep (Nicolas
Pitre).
- Update the cpupower utility:
* Update cpupower command, add support for AMD family 0x19 and
clean up the code to remove many of the family checks to make
future family updates easier (Nathan Fontenot, Robert Richter).
* Add Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially (Ivan Babrou).
- Make janitorial changes in power management Kconfig (Lukasz Luba)"
* tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
MAINTAINERS: cpuidle: exynos: include header in file pattern
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
PM: sleep: Constify static struct attribute_group
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
cpufreq: Remove CPUFREQ_STICKY flag
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
...
-----BEGIN PGP SIGNATURE-----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=XADP
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPUID cleanup from Borislav Petkov:
"Assign a dedicated feature word to a CPUID leaf which is widely used"
* tag 'x86_cpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]
interface too.
- Other misc small fixups.
-----BEGIN PGP SIGNATURE-----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=TbqQ
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 misc updates from Borislav Petkov:
- Complete the MSR write filtering by applying it to the MSR ioctl
interface too.
- Other misc small fixups.
* tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
selftests/fpu: Fix debugfs_simple_attr.cocci warning
selftests/x86: Use __builtin_ia32_read/writeeflags
x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk
lsdir_bid_tail_filter() ignored any build-id that wasn't exactly 20
bytes. This worked only for SHA-1 build-ids. The build-id for a PE file
is always a 16-byte GUID and ELF files can also have MD5 or UUID
build-ids.
This fix changes the filter to allow build-ids between 16 and 20 bytes.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/597788e4-661d-633f-857c-3de700115d02@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tests/shell/buildid.sh added an ELF executable with an MD5 build-id to
the perf debug cache but did not check whether the object was printed
by a subsequent call to "perf buildid-cache -l". It was being omitted
from the list.
A previous commit fixed the bug that left it out of the list. This adds
a test for it.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/c08be235-7434-5208-5f21-e8c9a3265464@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This removes the redundant checks bfd_check_format() and
bfd_target_elf_flavour. They were previously checking different files.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/94758ca1-0031-d7c6-6c6a-900fd77ef695@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The CoreSight testing contains sub cases, e.g. every CPU iterates the
possible conntected sinks and tests the paths between the associated ETM
with the found sink. Besides the per-thread testing, it also contains
system wide testing and snapshot testing.
To easier observe results for the sub cases, this patch introduces a new
function arm_cs_report(), it outputs the result as "PASS" or "FAIL" for
every sub case; and it records the error in the variable "glb_err" which
is used as the final return value when exits the testing.
Before:
# perf test 73 -v
73: Check Arm CoreSight trace data recording and synthesized samples:
--- start ---
test child forked, pid 17423
Recording trace (only user mode) with path: CPU0 => tmc_etf0
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
Recording trace (only user mode) with path: CPU0 => tmc_etr0
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
[...]
After:
# perf test 73 -v
73: Check Arm CoreSight trace data recording and synthesized samples:
--- start ---
test child forked, pid 17423
Recording trace (only user mode) with path: CPU0 => tmc_etf0
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight path testing (CPU0 -> tmc_etf0): PASS
Recording trace (only user mode) with path: CPU0 => tmc_etr0
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight path testing (CPU0 -> tmc_etr0): PASS
[...]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Basil Eljuse <basil.eljuse@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lore.kernel.org/lkml/20210215115944.535986-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the option '-v' for the verbose logs, "perf test" outputs tons of
logs for the CoreSight case, the logs are mainly introduced by the
decoding. And it outputs some trivial info from "perf record" command
and there have debugging info for CPU number and device name when
iterates between ETMs and sinks.
For a neat output format, this patch redirects the output logs to
"/dev/null", thus can avoid to flood logs. And it removes the redundant
log for CPU number and device name, which have already printed out the
relevant info in the function record_touch_file().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Basil Eljuse <basil.eljuse@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lore.kernel.org/lkml/20210215115944.535986-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation to the perf-intel-pt man page for tracing virtual
machines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events record a single cpumode so the tools cannot handle a branch from
the host machine to a virtual machine, or vice versa. Split it in two so
that each branch can have a different cpumode.
E.g. host ip -> guest ip
becomes: host ip -> 0
0 -> guest ip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the change of NR to detect whether an asynchronous branch is a VM-Exit.
Note VM-Entry is determined from the vmlaunch or vmresume instruction,
in which case, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handling TIP.PGD for an address filter for a guest kernel is the same as a
host kernel, but user space decoding, and hence address filters, are not
supported.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The guest kernel can be found from any guest thread belonging to the guest
machine. The guest machine is associated with the current host process pid.
An idle thread (pid=tid=0) is created as a vehicle from which to find the
guest kernel map.
Decoding guest user space is not supported.
Synthesized samples just need the cpumode set for the guest.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out machine__idle_thread() so it can be re-used for guest machines.
A thread is needed to find executable code, even for the guest kernel. To
avoid possible future pid number conflicts, the idle thread can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out machines__find_guest() so it can be re-used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PIP packet NR (non-root) flag indicates whether or not a virtual
machine is being traced (NR=1 => VM). Add support for tracking its value.
In particular note that the PIP packet (outside of PSB+) will be
associated with a TIP packet from which address the NR value takes
effect. At that point, there is a branch from_ip, to_ip with
corresponding from_nr and to_nr.
In the event of VM-Entry failure, there should still PIP and TIP packets
that can be followed in the same way.
Also note that this assumes that a host VMM is not employing VMX controls
that affect Intel PT, e.g. to hide the host from a guest using Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Retain the PIP packet payload as is, instead of just the CR3, because it
contains also the VMX NR flag which is needed to track VM-Entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
vmlaunch and vmresume as branch instructions.
Note, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
branch types for VM-Entry and VM-Exit.
Note they are both treated as "calls" because the VM-Exit transfers control
to a different address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
aux-output events need to have an AUX area event as the group leader.
However, grouping events does not allow the AUX area event to be given
an address filter because the --filter option must come after the event,
which conflicts with the grouping syntax.
To allow filtering in that case, automatically create a group since that
is the requirement anyway.
Example: (requires Intel Tremont)
perf record -c 500 -e 'intel_pt//u' --filter 'filter main @ /bin/ls' -e 'cycles/aux-output/pp' ls
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121140418.14705-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ubsan reported the following error. It was because sample's raw
data missed u32 padding at the end. So it broke the alignment of the
array after it.
The raw data contains an u32 size prefix so the data size should have
an u32 padding after 8-byte aligned data.
27: Sample parsing :util/synthetic-events.c:1539:4:
runtime error: store to misaligned address 0x62100006b9bc for type
'__u64' (aka 'unsigned long long'), which requires 8 byte alignment
0x62100006b9bc: note: pointer points here
00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
#0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13
#1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8
#2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9
#3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9
#4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9
#5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4
#6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9
#7 0x56153264e796 in run_builtin perf.c:312:11
#8 0x56153264cf03 in handle_internal_command perf.c:364:8
#9 0x56153264e47d in run_argv perf.c:408:2
#10 0x56153264c9a9 in main perf.c:538:3
#11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc)
#12 0x561532596828 in _start ...
SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use
util/synthetic-events.c:1539:4 in
Fixes: 045f8cd854 ("perf tests: Add a sample parsing test")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For X86, the var2_w field of PERF_SAMPLE_WEIGHT_STRUCT stands for the
instruction latency. Current perf forces the var2_w to the data->ins_lat
in the generic code. It works well for now because X86 is the only
architecture that supports the PERF_SAMPLE_WEIGHT_STRUCT, but it may
bring problems once other architectures support the sample type. For
example, the var2_w may be used to capture something else on PowerPC.
Create two architecture specific functions to parse and synthesize the
weight related samples. Move the X86 specific codes to the X86 version
functions. Other architectures can implement their own functions later
separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/1612540912-6562-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20210205175350.23817-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.
Fixes: 3d49807870 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When locating the DWARF module for a given address, __find_debuginfo()
requires a 'struct dso' passed via the userdata argument.
However, this field is only set in __report_module() if the module is
found in via dwfl_addrmodule(), not if it is found later via
dwfl_report_elf().
Set userdata irrespective of how the DWARF module was found, as long as
we found a module.
Fixes: bf53fc6b5f ("perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder")
Signed-off-by: Dave Rigby <d.rigby@me.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211801
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20210218165654.36604-1-d.rigby@me.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit da231338ec ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec ("perf record: Use an eventfd to wakeup when done")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following coccicheck warnings:
./tools/perf/util/header.c:3809:18-20: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/1612497255-87189-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not jump when 'k' is pressed, the cursor show stay where it is.
Right now, it jumps to the currently selected hot instruction.
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/65416cff-4eb6-713c-a174-2aa43fa64332@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eliminate the following coccicheck warning:
./tools/perf/util/metricgroup.c:382:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yang li <yang.lee@linux.alibaba.com>
Link: http://lore.kernel.org/lkml/1612165277-95878-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detect symbols generated by the OCaml compiler based on their prefix.
Demangle OCaml symbols, returning a newly allocated string (like the
existing Java demangling functionality).
Move a helper function (hex) from tests/code-reading.c to util/string.c
To test:
echo 'Printf.printf "%d\n" (Random.int 42)' > test.ml
perf record ocamlopt.opt test.ml
perf report -d ocamlopt.opt
Signed-off-by: Fabian Hemmer <copy@copy.sh>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LPU-Reference: 20210203211537.b25ytjb6dq5jfbwx@nyu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it parses the /proc file everytime it opens a file in the
cgroupfs. Save the last result to avoid it (assuming it won't be
changed between the accesses).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201216090556.813996-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce the number of buffers and hopefully make it more efficient. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201216090556.813996-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cgroupfs_find_mountpoint() looks up the /proc/mounts file to find
a directory for the given cgroup subsystem. It keeps both cgroup v1
and v2 path since there's a possibility of the mixed hierarchly.
But we can simply use v1 path if it's found as it will override the v2
hierarchy.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201216090556.813996-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module
can use static_call_update() to change the function called. This is
not desirable in general.
Not exporting static_call_key however also disallows usage of
static_call(), since objtool needs the key to construct the
static_call_site.
Solve this by allowing objtool to create the static_call_site using
the trampoline address when it builds a module and cannot find the
static_call_key symbol. The module loader will then try and map the
trampole back to a key before it constructs the normal sites list.
Doing this requires a trampoline -> key associsation, so add another
magic section that keeps those.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
Some static call declarations are going to be needed on low level header
files. Move the necessary material to the dedicated static call types
header to avoid inclusion dependency hell.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210118141223.123667-4-frederic@kernel.org
I've always been bothered by the endless (fragile) boilerplate for
rbtree, and I recently wrote some rbtree helpers for objtool and
figured I should lift them into the kernel and use them more widely.
Provide:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
Inlining and constant propagation should see the compiler inline the
whole thing, including the various compare functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
With LTO, there are symbols like these:
/usr/lib/debug/usr/lib64/libantlr4-runtime.so.4.8-4.8-1.4.x86_64.debug
10305: 0000000000955fa4 0 NOTYPE LOCAL DEFAULT 29 Predicate.cpp.2bc410e7
This comes from a runtime/debug split done by the standard way:
objcopy --only-keep-debug $runtime $debug
objcopy --add-gnu-debuglink=$debugfn -R .comment -R .GCC.command.line --strip-all $runtime
perf currently cannot resolve such symbols (relicts of LTO), as section
29 exists only in the debug file (29 is .debug_info). And perf resolves
symbols only against runtime file. This results in all symbols from such
a library being unresolved:
0.38% main2 libantlr4-runtime.so.4.8 [.] 0x00000000000671e0
So try resolving against the debug file first. And only if it fails (the
section has NOBITS set), try runtime file. We can do this, as "objcopy
--only-keep-debug" per documentation preserves all sections, but clears
data of some of them (the runtime ones) and marks them as NOBITS.
The correct result is now:
0.38% main2 libantlr4-runtime.so.4.8 [.] antlr4::IntStream::~IntStream
Note that these LTO symbols are properly skipped anyway as they belong
neither to *text* nor to *data* (is_label && !elf_sec__filter(&shdr,
secstrs) is true).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210217122125.26416-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-02-16
The following pull-request contains BPF updates for your *net-next* tree.
There's a small merge conflict between 7eeba1706e ("tcp: Add receive timestamp
support for receive zerocopy.") from net-next tree and 9cacf81f81 ("bpf: Remove
extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows:
[...]
lock_sock(sk);
err = tcp_zerocopy_receive(sk, &zc, &tss);
err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname,
&zc, &len, err);
release_sock(sk);
[...]
We've added 116 non-merge commits during the last 27 day(s) which contain
a total of 156 files changed, 5662 insertions(+), 1489 deletions(-).
The main changes are:
1) Adds support of pointers to types with known size among global function
args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov.
2) Add bpf_iter for task_vma which can be used to generate information similar
to /proc/pid/maps, from Song Liu.
3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow
rewriting bind user ports from BPF side below the ip_unprivileged_port_start
range, both from Stanislav Fomichev.
4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map
as well as per-cpu maps for the latter, from Alexei Starovoitov.
5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer
for sleepable programs, both from KP Singh.
6) Extend verifier to enable variable offset read/write access to the BPF
program stack, from Andrei Matei.
7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to
query device MTU from programs, from Jesper Dangaard Brouer.
8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF
tracing programs, from Florent Revest.
9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when
otherwise too many passes are required, from Gary Lin.
10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function
verification both related to zero-extension handling, from Ilya Leoshkevich.
11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa.
12) Batch of AF_XDP selftest cleanups and small performance improvement
for libbpf's xsk map redirect for newer kernels, from Björn Töpel.
13) Follow-up BPF doc and verifier improvements around atomics with
BPF_FETCH, from Brendan Jackman.
14) Permit zero-sized data sections e.g. if ELF .rodata section contains
read-only data from local variables, from Yonghong Song.
15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sample structure contains the field 'data_src' which is used to
tell the data operation attributions, e.g. operation type is loading or
storing, cache level, it's snooping or remote accessing, etc. At the
end, the 'data_src' will be parsed by perf mem/c2c tools to display
human readable strings.
This patch is to fill the 'data_src' field in the synthesized samples
base on different types. Currently perf tool can display statistics for
L1/L2/L3 caches but it doesn't support the 'last level cache'. To fit
to current implementation, 'data_src' field uses L3 cache for last level
cache.
Before this commit, perf mem report looks like this:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
81.56% 61945 0 N/A [.] 0x00000000000009d8 serial_c [.] 0000000000000000 [unknown] N/A N/A
18.44% 14003 0 N/A [.] 0x0000000000000828 serial_c [.] 0000000000000000 [unknown] N/A N/A
Now on a system with Arm SPE, addresses and access types are displayed:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
0.43% 324 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794e00 anon N/A Walker hit
0.42% 322 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794580 anon N/A Walker hit
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The memory event can deliver two benefits:
- The first benefit is the memory event can give out global view for
memory accessing, rather than organizing events with scatter mode
(e.g. uses separate event for L1 cache, last level cache, etc) which
which can only display a event for single memory type, memory events
include all memory accessing so it can display the data accessing
cross memory levels in the same view;
- The second benefit is the sample generation might introduce a big
overhead and need to wait for long time for Perf reporting, we can
specify itrace option '--itrace=M' to filter out other events and only
output memory events, this can significantly reduce the overhead
caused by generating samples.
This patch is to enable memory event for Arm SPE.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To properly handle memory and branch samples, this patch divides into
two functions for generating samples: arm_spe__synth_mem_sample() is for
synthesizing memory and TLB samples; arm_spe__synth_branch_sample() is
to synthesize branch samples.
Arm SPE backend decoder has passed virtual and physical address through
packets, the address info is stored into the synthesize samples in the
function arm_spe__synth_mem_sample().
Committer notes:
Fixed this:
36 46.77 fedora:27 : FAIL clang version 5.0.2 (tags/RELEASE_502/final)
util/arm-spe.c:269:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
^
util/arm-spe.c:288:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
By using = { .ip = 0, };
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.
Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.
Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
The variable in practice will never be uninitialized, because the
loop will always go through at least one iteration.
In case it would not, make vcpu_get_cpuid report an assertion
failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test launches 512 VMs in serial and kills them after a random
amount of time.
The test was original written to exercise KVM user notifiers in
the context of1650b4ebc99d:
- KVM: Disable irq while unregistering user notifier
- https://lore.kernel.org/kvm/CACXrx53vkO=HKfwWwk+fVpvxcNjPrYmtDZ10qWxFvVX_PTGp3g@mail.gmail.com/
Recently, this test piqued my interest because it proved useful to
for AMD SNP in exercising the "in-use" pages, described in APM section
15.36.12, "Running SNP-Active Virtual Machines".
Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Message-Id: <20210213001452.1719001-1-marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GPIO CDEV is now optional and required for the selftests so add it to
the config.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add a port to the GPIO uAPI v2 interface and make it the default.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
gpio-mockup-chardev helper has been obsoleted and removed, so also remove
the tools/gpio code that it, and nothing else, was using.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
GPIO Makefile has been greatly simplified so remove references to lines
which no longer exist.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Build restrictions related to the gpio-mockup-chardev helper are
no longer relevant so remove them.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
GPIO selftests have changed to new gpio-mockup-cdev helper, so remove
old gpio-mockup-chardev helper.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The GPIO mockup selftests are overly complicated with separate
implementations of the tests for sysfs and cdev uAPI, and with the cdev
implementation being dependent on tools/gpio and libmount.
Rework the test implementation to provide a common test suite with a
simplified pluggable uAPI interface. The cdev implementation utilises
the GPIO uAPI directly to remove the dependence on tools/gpio.
The simplified uAPI interface removes the need for any file system mount
checks in C, and so removes the dependence on libmount.
The rework also fixes the sysfs test implementation which has been broken
since the device created in the multiple gpiochip case was split into
separate devices.
Fixes: 8a39f597bc ("gpio: mockup: rework device probing")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Update the kselftest framework to allow client drivers to
specify that some tests were skipped.
Signed-off-by: Timur Tabi <timur@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210214161348.369023-3-timur@kernel.org
test_global_func9 - check valid pointer's scenarios
test_global_func10 - check that a smaller type cannot be passed as a
larger one
test_global_func11 - check that CTX pointer cannot be passed
test_global_func12 - check access to a null pointer
test_global_func13 - check access to an arbitrary pointer value
test_global_func14 - check that an opaque pointer cannot be passed
test_global_func15 - check that a variable has an unknown value after
it was passed to a global function by pointer
test_global_func16 - check access to uninitialized stack memory
test_global_func_args - check read and write operations through a pointer
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212205642.620788-5-me@ubique.spb.ru
Add tests in tc_flower.sh for generic matching on MPLS Label Stack
Entries. The label, tc, bos and ttl fields are tested for the first
and second labels. For each field, the minimal and maximal values are
tested (the former at depth 1 and the later at depth 2).
There are also tests for matching the presence of a label stack entry
at a given depth.
In order to reduce the amount of code, all "lse" subcommands are tested
in match_mpls_lse_test(). Action "continue" is used, so that test
packets are evaluated by all filters. Then, we can verify if each
filter matched the expected number of packets.
Some versions of tc-flower produced invalid json output when dumping
MPLS filters with depth > 1. Skip the test if tc isn't recent enough.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests in tc_flower.sh for mpls_label, mpls_tc, mpls_bos and
mpls_ttl. For each keyword, test the minimal and maximal values.
Selectively skip these new mpls tests for tc versions that don't
support them.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the following command:
# tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
$tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop
doesn't drop all IPv4 packets that match the configured TTL / destination
address. In particular, if "fragment offset" or "more fragments" have non
zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply
ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while
at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the
correct behavior.
Fixes: 518d8a2e9b ("net/flow_dissector: add support for dissection of misc ip header fields")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we receive less MPCapable SYN or 3rd ACK than expected, we now mark
the test as failed.
On the other hand, if we receive more, we keep the warning but we add a
hint that it is probably due to retransmissions and that's why we don't
mark the test as failed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/148
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Info from received MPCapable SYN were printed instead of the ones from
received MPCapable 3rd ACK.
Fixes: fed61c4b58 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if that may sound completely unlikely, the mptcp implementation
is not perfect, yet.
When the self-tests report an error we usually need more information
of what the scripts currently report. iproute allow provides
some additional goodies since a few releases, let's dump them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding selftest for BPF-helper bpf_check_mtu(). Making sure
it can be used from both XDP and TC.
V16:
- Fix 'void' function definition
V11:
- Addresse nitpicks from Andrii Nakryiko
V10:
- Remove errno non-zero test in CHECK_ATTR()
- Addresse comments from Andrii Nakryiko
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/161287791989.790810.13612620012522164562.stgit@firesoul
This demonstrate how bpf_check_mtu() helper can easily be used together
with bpf_skb_adjust_room() helper, prior to doing size adjustment, as
delta argument is already setup.
Hint: This specific test can be selected like this:
./test_progs -t cls_redirect
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287791481.790810.4444271170546646080.stgit@firesoul
This BPF-helper bpf_check_mtu() works for both XDP and TC-BPF programs.
The SKB object is complex and the skb->len value (accessible from
BPF-prog) also include the length of any extra GRO/GSO segments, but
without taking into account that these GRO/GSO segments get added
transport (L4) and network (L3) headers before being transmitted. Thus,
this BPF-helper is created such that the BPF-programmer don't need to
handle these details in the BPF-prog.
The API is designed to help the BPF-programmer, that want to do packet
context size changes, which involves other helpers. These other helpers
usually does a delta size adjustment. This helper also support a delta
size (len_diff), which allow BPF-programmer to reuse arguments needed by
these other helpers, and perform the MTU check prior to doing any actual
size adjustment of the packet context.
It is on purpose, that we allow the len adjustment to become a negative
result, that will pass the MTU check. This might seem weird, but it's not
this helpers responsibility to "catch" wrong len_diff adjustments. Other
helpers will take care of these checks, if BPF-programmer chooses to do
actual size adjustment.
V14:
- Improve man-page desc of len_diff.
V13:
- Enforce flag BPF_MTU_CHK_SEGS cannot use len_diff.
V12:
- Simplify segment check that calls skb_gso_validate_network_len.
- Helpers should return long
V9:
- Use dev->hard_header_len (instead of ETH_HLEN)
- Annotate with unlikely req from Daniel
- Fix logic error using skb_gso_validate_network_len from Daniel
V6:
- Took John's advice and dropped BPF_MTU_CHK_RELAX
- Returned MTU is kept at L3-level (like fib_lookup)
V4: Lot of changes
- ifindex 0 now use current netdev for MTU lookup
- rename helper from bpf_mtu_check to bpf_check_mtu
- fix bug for GSO pkt length (as skb->len is total len)
- remove __bpf_len_adj_positive, simply allow negative len adj
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790461.790810.3429728639563297353.stgit@firesoul
The BPF-helpers for FIB lookup (bpf_xdp_fib_lookup and bpf_skb_fib_lookup)
can perform MTU check and return BPF_FIB_LKUP_RET_FRAG_NEEDED. The BPF-prog
don't know the MTU value that caused this rejection.
If the BPF-prog wants to implement PMTU (Path MTU Discovery) (rfc1191) it
need to know this MTU value for the ICMP packet.
Patch change lookup and result struct bpf_fib_lookup, to contain this MTU
value as output via a union with 'tot_len' as this is the value used for
the MTU lookup.
V5:
- Fixed uninit value spotted by Dan Carpenter.
- Name struct output member mtu_result
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287789952.790810.13134700381067698781.stgit@firesoul
Perf failed to add a kretprobe event with debuginfo of vmlinux which is
compiled by gcc with -fpatchable-function-entry option enabled. The
same issue with kernel module.
Issue:
# perf probe -v 'kernel_clone%return $retval'
......
Writing event: r:probe/kernel_clone__return _text+599624 $retval
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
# cat /sys/kernel/debug/tracing/error_log
[156.75] trace_kprobe: error: Retprobe address must be an function entry
Command: r:probe/kernel_clone__return _text+599624 $retval
^
# llvm-dwarfdump vmlinux |grep -A 10 -w 0x00df2c2b
0x00df2c2b: DW_TAG_subprogram
DW_AT_external (true)
DW_AT_name ("kernel_clone")
DW_AT_decl_file ("/home/code/linux-next/kernel/fork.c")
DW_AT_decl_line (2423)
DW_AT_decl_column (0x07)
DW_AT_prototyped (true)
DW_AT_type (0x00dcd492 "pid_t")
DW_AT_low_pc (0xffff800010092648)
DW_AT_high_pc (0xffff800010092b9c)
DW_AT_frame_base (DW_OP_call_frame_cfa)
# cat /proc/kallsyms |grep kernel_clone
ffff800010092640 T kernel_clone
# readelf -s vmlinux |grep -i kernel_clone
183173: ffff800010092640 1372 FUNC GLOBAL DEFAULT 2 kernel_clone
# objdump -d vmlinux |grep -A 10 -w \<kernel_clone\>:
ffff800010092640 <kernel_clone>:
ffff800010092640: d503201f nop
ffff800010092644: d503201f nop
ffff800010092648: d503233f paciasp
ffff80001009264c: a9b87bfd stp x29, x30, [sp, #-128]!
ffff800010092650: 910003fd mov x29, sp
ffff800010092654: a90153f3 stp x19, x20, [sp, #16]
The entry address of kernel_clone converted by debuginfo is _text+599624
(0x92648), which is consistent with the value of DW_AT_low_pc attribute.
But the symbolic address of kernel_clone from /proc/kallsyms is
ffff800010092640.
This issue is found on arm64, -fpatchable-function-entry=2 is enabled when
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y;
Just as objdump displayed the assembler contents of kernel_clone,
GCC generate 2 NOPs at the beginning of each function.
kprobe_on_func_entry detects that (_text+599624) is not the entry address
of the function, which leads to the failure of adding kretprobe event.
kprobe_on_func_entry
->_kprobe_addr
->kallsyms_lookup_size_offset
->arch_kprobe_on_func_entry // FALSE
The cause of the issue is that the first instruction in the compile unit
indicated by DW_AT_low_pc does not include NOPs.
This issue exists in all gcc versions that support
-fpatchable-function-entry option.
I have reported it to the GCC community:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98776
Currently arm64 and PA-RISC may enable fpatchable-function-entry option.
The kernel compiled with clang does not have this issue.
FIX:
This GCC issue only cause the registration failure of the kretprobe event
which doesn't need debuginfo. So, stop using debuginfo for retprobe.
map will be used to query the probe function address.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210210062646.2377995-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first time dso__load() was called on a PE file it always returned -1
error. This caused the first call to map__find_symbol() to always fail
on a PE file so the first sample from each PE file always had symbol
<unknown>. Subsequent samples succeed however because the DSO is already
loaded.
This fixes dso__load() to return 0 when successfully loading a DSO with
libbfd.
Fixes: eac9a4342e ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/1671b43b-09c3-1911-dbf8-7f030242fbf7@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_bfd_symbols() attempts to load a DSO at its original path,
then closes it and loads the file in the debug cache. This is incorrect.
It should ignore the original file and work with only the debug cache.
The original file may have changed or may not even exist, for example if
the debug cache has been transferred to another machine via "perf
archive".
This fix makes it only load the file in the debug cache.
Further notes from Nicholas:
dso__load_bfd_symbols() is called in a loop from dso__load() for a variety
of paths. These are generated by the various DSO_BINARY_TYPEs in the
binary_type_symtab list at the top of util/symbol.c. In each case the
debugfile passed to dso__load_bfd_symbols() is the path to try.
One of those iterations (the first one I believe) passes the original path
as the debugfile. If the file still exists at the original path, this is
the one that ends up being used in case the debugcache was deleted or the
PE file doesn't have a build-id.
A later iteration (BUILD_ID_CACHE) passes debugfile as the file in the
debugcache if it has a build-id. Even if the file was previously loaded at
its original path, (if I understand correctly) this load will override it
so the debugcache file ends up being used.
Committer notes:
So if it fails to find in the cache, it will eventually hope for the
best and look at the path in the local filesystem, which in many cases
is enough.
At some point we need to switch from this "hope for the best" approach
to one that warns the user that there is no guarantee, if no buildid is
present, that just by looking at the pathname the symbolisation will
work.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/e58e1237-94ab-e1c9-a7b9-473531906954@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is what I see after compiling the kernel:
# bpf-next...bpf-next/master
?? tools/bpf/resolve_btfids/libbpf/
Fixes: fc6b48f692 ("tools/resolve_btfids: Build libbpf and libsubcmd in separate directories")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212010053.668700-1-sdf@google.com
The test dumps information similar to /proc/pid/maps. The first line of
the output is compared against the /proc file to make sure they match.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210212183107.50963-4-songliubraving@fb.com
This patch is to store operation type in packet structure.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to store virtual and physical memory addresses in packet,
which will be used for memory samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-2-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to enable sample type PERF_SAMPLE_DATA_SRC for Arm SPE in
the perf data, when output the tracing data, it tells tools that it
contains data source in the memory event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210211133856.2137-1-james.clark@arm.com
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Minor cleanup.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210211183914.4093187-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Migrated to libperf in:
4b247fa731 ("libperf: Adopt xyarray class from perf")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210212043803.365993-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a "void *owner" member. The existing
bpf_tcp_ca test will ensure the bpf_cubic.o and bpf_dctcp.o
can be loaded.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212021037.267278-1-kafai@fb.com
When libbpf initializes the kernel's struct_ops in
"bpf_map__init_kern_struct_ops()", it enforces all
pointer types must be a function pointer and rejects
others. It turns out to be too strict. For example,
when directly using "struct tcp_congestion_ops" from vmlinux.h,
it has a "struct module *owner" member and it is set to NULL
in a bpf_tcp_cc.o.
Instead, it only needs to ensure the member is a function
pointer if it has been set (relocated) to a bpf-prog.
This patch moves the "btf_is_func_proto(kern_mtype)" check
after the existing "if (!prog) { continue; }". The original debug
message in "if (!prog) { continue; }" is also removed since it is
no longer valid. Beside, there is a later debug message to tell
which function pointer is set.
The "btf_is_func_proto(mtype)" has already been guaranteed
in "bpf_object__collect_st_ops_relos()" which has been run
before "bpf_map__init_kern_struct_ops()". Thus, this check
is removed.
v2:
- Remove outdated debug message (Andrii)
Remove because there is a later debug message to tell
which function pointer is set.
- Following mtype->type is no longer needed. Remove:
"skip_mods_and_typedefs(btf, mtype->type, &mtype_id)"
- Do "if (!prog)" test before skip_mods_and_typedefs.
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212021030.266932-1-kafai@fb.com
We have the environments where usage of AF_INET is prohibited
(cgroup/sock_create returns EPERM for AF_INET). Let's use
AF_LOCAL instead of AF_INET, it should perfectly work with SIOCETHTOOL.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210209221826.922940-1-sdf@google.com
This is a tool that is intended to work around the fact that the
preemptoff, irqsoff, and preemptirqsoff tracers only work in
overwrite mode. The idea is to act randomly in such a way that we
do not systematically lose any latencies, so that if enough testing
is done, all latencies will be captured. If the same burst of
latencies is repeated, then sooner or later we will have captured all
the latencies.
It also works with the wakeup_dl, wakeup_rt, and wakeup tracers.
However, in that case it is probably not useful to use the random
sleep functionality.
The reason why it may be desirable to catch all latencies with a long
test campaign is that for some organizations, it's necessary to test
the kernel in the field and not practical for developers to work
iteratively with field testers. Because of cost and project schedules
it is not possible to start a new test campaign every time a latency
problem has been fixed.
It uses inotify to detect changes to /sys/kernel/tracing/trace.
When a latency is detected, it will either sleep or print
immediately, depending on a function that act as an unfair coin
toss.
If immediate print is chosen, it means that we open
/sys/kernel/tracing/trace and thereby cause a blackout period
that will hide any subsequent latencies.
If sleep is chosen, it means that we wait before opening
/sys/kernel/tracing/trace, by default for 1000 ms, to see if
there is another latency during this period. If there is, then we will
lose the previous latency. The coin will be tossed again with a
different probability, and we will either print the new latency, or
possibly a subsequent one.
The probability for the unfair coin toss is chosen so that there
is equal probability to obtain any of the latencies in a burst.
However, this assumes that we make an assumption of how many
latencies there can be. By default the program assumes that there
are no more than 2 latencies in a burst, the probability of immediate
printout will be:
1/2 and 1
Thus, the probability of getting each of the two latencies will be 1/2.
If we ever find that there is more than one latency in a series,
meaning that we reach the probability of 1, then the table will be
expanded to:
1/3, 1/2, and 1
Thus, we assume that there are no more than three latencies and each
with a probability of 1/3 of being captured. If the probability of 1
is reached in the new table, that is we see more than two closely
occurring latencies, then the table will again be extended, and so
on.
On my systems, it seems like this scheme works fairly well, as
long as the latencies we trace are long enough, 300 us seems to be
enough. This userspace program receive the inotify event at the end
of a latency, and it has time until the end of the next latency
to react, that is to open /sys/kernel/tracing/trace. Thus,
if we trace latencies that are >300 us, then we have at least 300 us
to react.
The minimum latency will of course not be 300 us on all systems, it
will depend on the hardware, kernel version, workload and
configuration.
Example usage:
In one shell, give the following command:
sudo latency-collector -rvv -t preemptirqsoff -s 2000 -a 3
This will trace latencies > 2000us with the preemptirqsoff tracer,
using random sleep with maximum verbosity, with a probability
table initialized to a size of 3.
In another shell, generate a few bursts of latencies:
root@host:~# modprobe preemptirq_delay_test delay=3000 test_mode=alternate
burst_size=3
root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger
root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger
root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger
root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger
If all goes well, you should be getting stack traces that shows
all the different latencies, i.e. you should see all the three
functions preemptirqtest_0, preemptirqtest_1, preemptirqtest_2 in the
stack traces.
Link: https://lkml.kernel.org/r/20210212134421.172750-2-Viktor.Rosendahl@bmw.de
Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
-----BEGIN PGP SIGNATURE-----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=6EwV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.
Conflicts:
arch/x86/xen/xen-asm.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This builds up on the existing socket cookie test which checks whether
the bpf_get_socket_cookie helpers provide the same value in
cgroup/connect6 and sockops programs for a socket created by the
userspace part of the test.
Instead of having an update_cookie sockops program tag a socket local
storage with 0xFF, this uses both an update_cookie_sockops program and
an update_cookie_tracing program which succesively tag the socket with
0x0F and then 0xF0.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-5-revest@chromium.org
When migrating from the bpf.h's to the vmlinux.h's definition of struct
bps_sock, an interesting LLVM behavior happened. LLVM started producing
two fetches of ctx->sk in the sockops program this means that the
verifier could not keep track of the NULL-check on ctx->sk. Therefore,
we need to extract ctx->sk in a variable before checking and
dereferencing it.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-4-revest@chromium.org
Currently, the selftest for the BPF socket_cookie helpers is built and
run independently from test_progs. It's easy to forget and hard to
maintain.
This patch moves the socket cookies test into prog_tests/ and vastly
simplifies its logic by:
- rewriting the loading code with BPF skeletons
- rewriting the server/client code with network helpers
- rewriting the cgroup code with test__join_cgroup
- rewriting the error handling code with CHECKs
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-3-revest@chromium.org
This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
Since "92acdc58ab11 bpf, net: Rework cookie generator as per-cpu one"
socket cookies are not guaranteed to be non-decreasing. The
bpf_get_socket_cookie helper descriptions are currently specifying that
cookies are non-decreasing but we don't want users to rely on that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-1-revest@chromium.org
GCC (GCC) 8.4.0 20200304 fails to build perf with:
: util/symbol.c: In function 'dso__load_bfd_symbols':
: util/symbol.c:1626:16: error: comparison of integer expressions of different signednes
: for (i = 0; i < symbols_count; ++i) {
: ^
: util/symbol.c:1632:16: error: comparison of integer expressions of different signednes
: while (i + 1 < symbols_count &&
: ^
: util/symbol.c:1637:13: error: comparison of integer expressions of different signednes
: if (i + 1 < symbols_count &&
: ^
: cc1: all warnings being treated as errors
It's unlikely that the symtable will be that big, but the fix is an
oneliner and as perf has CORE_CFLAGS += -Wextra, which makes build to
fail together with CORE_CFLAGS += -Werror
Fixes: eac9a4342e ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jacek Caban <jacek@codeweavers.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210209145148.178702-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Considering the following testcase:
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
'perf annotate' displays:
86.52 │40055e: → ja 40056c <foo(int, int)+0x26>
13.37 │400560: mov -0x18(%rbp),%eax
│400563: add %eax,-0x14(%rbp)
│400566: addl $0x1,-0x4(%rbp)
0.11 │40056a: → jmp 400557 <foo(int, int)+0x11>
│40056c: mov -0x14(%rbp),%eax
│40056f: pop %rbp
and the 'ja 40056c' does not link to the location in the function. It's
caused by fact that comma is wrongly parsed, it's part of function
signature.
With my patch I see:
86.52 │ ┌──ja 26
13.37 │ │ mov -0x18(%rbp),%eax
│ │ add %eax,-0x14(%rbp)
│ │ addl $0x1,-0x4(%rbp)
0.11 │ │↑ jmp 11
│26:└─→mov -0x14(%rbp),%eax
and 'o' output prints:
86.52 │4005┌── ↓ ja 40056c <foo(int, int)+0x26>
13.37 │4005│0: mov -0x18(%rbp),%eax
│4005│3: add %eax,-0x14(%rbp)
│4005│6: addl $0x1,-0x4(%rbp)
0.11 │4005│a: ↑ jmp 400557 <foo(int, int)+0x11>
│4005└─→ mov -0x14(%rbp),%eax
On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:
jmp 400543 <foo+0x1d>
Committer testing:
Before:
$ cat cpp_args_annotate.c
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
$ gcc --version |& head -1
gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
$ gcc -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
$ perf annotate --stdio2 foo
Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo>:
foo():
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
↓ jmp 1d
a += b;
13.45 13: mov -0x18(%rbp),%eax
add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.09 1d: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.46 ↑ jbe 13
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
I.e. works for C, now lets switch to C++:
$ g++ -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 → ja 40112c <foo(int, int)+0x26>
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 → jmp 401117 <foo(int, int)+0x11>
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Reproduced.
Now with this patch:
Reusing the C++ built binary, as we can see here:
$ readelf -wi cpp_args_annotate | grep producer
<c> DW_AT_producer : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
$
And furthermore:
$ file cpp_args_annotate
cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
$ perf buildid-list -i cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9
$ perf buildid-list | grep cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
$
It now works:
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
11: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 ↓ ja 26
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 ↑ jmp 11
return a;
26: mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the synthetic event errors and positions have changed in the
code - update those and add several more tests.
Also add a runtime check to ensure that the kernel supports dynamic
strings in synthetic events, which these tests require.
Link: https://lkml.kernel.org/r/51402656433455baead34f068c6e9466b64df9c0.1612208610.git.zanussi@kernel.org
Fixes: 81ff92a93d (selftests/ftrace: Add test case for synthetic event syntax errors)
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As started by commit 05a5f51ca5 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.
Signed-off-by: Kees Kook <keescook@chromium.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20210210234220.2401035-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick a new prctl introduced in:
36a6c843fd ("entry: Use different define for selector variable in SUD")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
Just silences this perf tools build warning:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test_xdp_redirect.sh script uses a bash feature, '&>'. On systems,
e.g. Debian, where '/bin/sh' is dash, this will not work as
expected. Use bash in the shebang to get the expected behavior.
Further, using 'set -e' means that the error of a command cannot be
captured without the command being executed with '&&' or '||'. Let us
restructure the ping-commands, and use them as an if-expression, so
that we can capture the return value.
v4: Added missing Fixes:, and removed local variables. (Andrii)
v3: Reintroduced /bin/bash, and kept 'set -e'. (Andrii)
v2: Kept /bin/sh and removed bashisms. (Randy)
Fixes: 996139e801 ("selftests: bpf: add a test for XDP redirect")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210211082029.1687666-1-bjorn.topel@gmail.com
Add a basic test for map-in-map and per-cpu maps in sleepable programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-10-alexei.starovoitov@gmail.com
Add per-program counter for number of times recursion prevention mechanism
was triggered and expose it via show_fdinfo and bpf_prog_info.
Teach bpftool to print it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-7-alexei.starovoitov@gmail.com
Add recursive non-sleepable fentry program as a test.
All attach points where sleepable progs can execute are non recursive so far.
The recursion protection mechanism for sleepable cannot be activated yet.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-6-alexei.starovoitov@gmail.com
Since both sleepable and non-sleepable programs execute under migrate_disable
add recursion prevention mechanism to both types of programs when they're
executed via bpf trampoline.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-5-alexei.starovoitov@gmail.com
Add a test for the perf daemon 'lock' command ensuring only one instance
of daemon can run over one base directory.
Committer testing:
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 793255
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [793506]'
signal 12 sent to session 'test [793506]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'ping' command. The tests verifies the
ping command gets proper answer from sessions.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 792143
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [792415]'
signal 12 sent to session 'test [792415]'
test daemon ping
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'signal' command. The test sends a signal
to configured sessions and verifies the perf data files were generated
accordingly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 790017
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [790268]'
signal 12 sent to session 'test [790268]'
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'stop' command. The test stops the daemon
and verifies all the configured sessions are properly terminated.
Committer testing:
[root@five ~]# time perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 788560
test daemon list
test daemon reconfig
test daemon stop
test child finished with 0
---- end ----
daemon operations: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for daemon reconfiguration. The test changes the
configuration file and checks that the session is changed properly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test daemon
76: daemon operations : Ok
real 0m6.055s
user 0m0.174s
sys 0m0.147s
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 786863
test daemon list
test daemon reconfig
test child finished with 0
---- end ----
daemon operations: Ok
real 0m6.127s
user 0m0.222s
sys 0m0.165s
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for basic perf daemon listing via the CSV output mode (-x
option).
Check that the configured sessions display expected values.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]#
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 785037
test daemon list
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
