The initializers created by the `[try_][pin_]init!` macros utilize the
guard pattern to drop already initialized fields, when initialization
fails mid-way. These guards are generated to have the same name as the
field that they handle. To prevent namespacing issues [1] when the
field name is the same as e.g. a constant name, add `__` as a prefix
and `_guard` as the suffix.
[ Gary says:
"Here's the simplified example:
```
macro_rules! f {
() => {
let a = 1;
let _: u32 = a;
}
}
const a: u64 = 1;
fn main() {
f!();
}
```
The `a` in `f` have a different hygiene so normally it is scoped to the
macro expansion and wouldn't escape. Interestingly a constant is still
preferred despite the hygiene so constants escaped into the macro,
leading to the error."
- Miguel ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/1e8a2a1f-abbf-44ba-8344-705a9cbb1627@proton.me/ [1]
Link: https://lore.kernel.org/r/20240403194321.88716-1-benno.lossin@proton.me
[ Added Benno's link and Gary's simplified example. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Decrement the refcount of an `Arc`, but handle the case where it hits
zero by taking ownership of the now-unique `Arc`, instead of destroying
and deallocating it.
This is a dependency of the linked list that Rust Binder uses. The
linked list uses this method as part of its `ListArc` abstraction [1].
Boqun Feng has authored the examples.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240402-linked-list-v1-1-b1c59ba7ae3b@google.com [1]
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-2-54db6440a9a9@google.com
[ Replace `try_new` with `new` in example since we now have the new
allocation APIs. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Allows access to a value in an `Arc` that is currently held as a raw
pointer due to use of `Arc::into_raw`, without destroying or otherwise
consuming that raw pointer.
This is a dependency of the linked list that Rust Binder uses. The
linked list uses this method when iterating over the linked list [1].
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240402-linked-list-v1-6-b1c59ba7ae3b@google.com [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-1-54db6440a9a9@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
To support a potential usage:
static foo: Opaque<Foo> = ..; // Or defined in an extern block.
...
fn bar() {
let ptr = foo.get();
}
`Opaque::get` need to be `const`, otherwise compiler will complain
because calls on statics are limited to const functions.
Also `Opaque::get` should be naturally `const` since it's a composition
of two `const` functions: `UnsafeCell::get` and `ptr::cast`.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240401214543.1242286-1-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With the adoption of `BoxExt` and `VecExt`, we don't need the functions
provided by this feature (namely the methods prefixed with `try_` and
different allocator per collection instance).
We do need `AllocError`, but we define our own as it is a trivial empty
struct.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-11-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the last component in the conversion for allocators to take
allocation flags as parameters.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-10-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We also remove the `try_` prefix to align with how `Box` and `Vec` are
providing methods now.
`init` is temporarily updated with uses of GFP_KERNEL. These will be
updated in a subsequent patch to take flags as well.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-9-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We also rename the methods by removing the `try_` prefix since the names
are available due to our usage of the `no_global_oom_handling` config
when building the `alloc` crate.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240328013603.206764-8-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make fallible versions of `new` and `new_uninit` methods available in
`Box` even though it doesn't implement them because we build `alloc`
with the `no_global_oom_handling` config.
They also have an extra `flags` parameter that allows callers to pass
flags to the allocator.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240328013603.206764-7-wedsonaf@gmail.com
[ Used `Box::write()` to avoid one `unsafe` block as suggested by Boqun. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We'll use them when allocating `Box`, `Arc`, and `UniqueArc` instances,
as well as when allocating memory for `Vec` elements. These changes will
come in subsequent patches.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-6-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Switch away from our fork of the `alloc` crate. We remove it altogether
in the next commit.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-4-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make `try_with_capacity`, `try_push`, and `try_extend_from_slice`
methods available in `Vec` even though it doesn't implement them. It is
implemented with `try_reserve` and `push_within_capacity`.
This is in preparation for switching to the upstream `alloc` crate.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-3-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We will add more to the `alloc` module in subsequent patches (e.g.,
allocation flags and extension traits).
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20240328013603.206764-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The previous two patches made it possible to add `#[pin_data]` on
structs with default generic parameter values.
This patch makes `Work` use `#[pin_data]` and removes an invocation of
`pin_init_from_closure`. This function is intended as a low level manual
escape hatch, so it is better to rely on the safe `pin_init!` macro.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add support for generic parameters defaults in `#[pin_data]` by using
the newly introduced `decl_generics` instead of the `impl_generics`.
Before this would not compile:
#[pin_data]
struct Foo<const N: usize = 0> {
// ...
}
because it would be expanded to this:
struct Foo<const N: usize = 0> {
// ...
}
const _: () = {
struct __ThePinData<const N: usize = 0> {
__phantom: ::core::marker::PhantomData<fn(Foo<N>) -> Foo<N>>,
}
impl<const N: usize = 0> ::core::clone::Clone for __ThePinData<N> {
fn clone(&self) -> Self {
*self
}
}
// [...] rest of expansion omitted
};
The problem is with the `impl<const N: usize = 0>`, since that is
invalid Rust syntax. It should not mention the default value at all,
since default values only make sense on type definitions.
The new `impl_generics` do not contain the default values, thus
generating correct Rust code.
This is used by the next commit that puts `#[pin_data]` on
`kernel::workqueue::Work`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add functions to convert a CString to upper- / lowercase, either
in-place or by creating a copy of the original CString.
Naming follows the one from the Rust stdlib, where functions starting
with 'to' create a copy and functions starting with 'make' perform an
in-place conversion.
This is required by the Nova project (GSP only Rust successor of
Nouveau) to convert stringified enum values (representing different GPU
chipsets) to strings in order to generate the corresponding firmware
paths. See also [1].
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/288089-General/topic/String.20manipulation.20in.20kernel.20Rust [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240223163726.12397-1-dakr@redhat.com
[ Reworded to fix typo and to make the link use the `Link:` tag. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the next upgrade to the Rust toolchain, from 1.76.0 to 1.77.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
The `offset_of` feature (single-field `offset_of!`) that we were using
got stabilized in Rust 1.77.0 [3].
Therefore, now the only unstable features allowed to be used outside the
`kernel` crate is `new_uninit`, though other code to be upstreamed may
increase the list.
Please see [4] for details.
# Required changes
Rust 1.77.0 merged the `unused_tuple_struct_fields` lint into `dead_code`,
thus upgrading it from `allow` to `warn` [5]. In turn, this made `rustc`
complain about the `ThisModule`'s pointer field being never read, but
the previous patch adds the `as_ptr` method to it, needed by Binder [6],
so that we do not need to locally `allow` it.
# Other changes
Rust 1.77.0 introduces the `--check-cfg` feature [7], for which there
is a Call for Testing going on [8]. We were requested to test it and
we found it useful [9] -- we will likely enable it in the future.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1770-2024-03-21 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/rust-lang/rust/pull/118799 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [4]
Link: https://github.com/rust-lang/rust/pull/118297 [5]
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/#Z31rust:kernel:lib.rs [6]
Link: https://doc.rust-lang.org/nightly/unstable-book/compiler-flags/check-cfg.html [7]
Link: https://github.com/rust-lang/rfcs/pull/3013#issuecomment-1936648479 [8]
Link: https://github.com/rust-lang/rust/issues/82450#issuecomment-1947462977 [9]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240217002717.57507-1-ojeda@kernel.org
[ Upgraded to 1.77.1. Removed `allow(dead_code)` thanks to the previous
patch. Reworded accordingly. No changes to `alloc` during the beta. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This allows you to get a raw pointer to THIS_MODULE for use in unsafe
code. The Rust Binder RFC uses it when defining fops for the binderfs
component [1].
This doesn't really need to go in now - it could go in together with
Rust Binder like how it is sent in the Rust Binder RFC. However, the
upcoming 1.77.0 release of the Rust compiler introduces a new warning,
and applying this patch now will silence that warning. That allows us to
avoid adding the #[allow(dead_code)] annotation seen in [2].
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@google.com/ [1]
Link: https://lore.kernel.org/all/20240217002717.57507-1-ojeda@kernel.org/ [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240226-module-as-ptr-v1-1-83bc89213113@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
This cycle, a lot of workqueue changes including some that are significant
and invasive.
- During v6.6 cycle, unbound workqueues were updated so that they are more
topology aware and flexible, which among other things improved workqueue
behavior on modern multi-L3 CPUs. In the process, 636b927eba
("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
switched unbound workqueues to use per-CPU frontend pool_workqueues as a
part of increasing front-back mapping flexibility.
An unwelcome side effect of this change was that this made max concurrency
enforcement per-CPU blowing up the maximum number of allowed concurrent
executions. I incorrectly assumed that this wouldn't cause practical
problems as most unbound workqueue users are self-regulate max
concurrency; however, there definitely are which don't (e.g. on IO paths)
and the drastic increase in the allowed max concurrency led to noticeable
perf regressions in some use cases.
This is now addressed by separating out max concurrency enforcement to a
separate struct - wq_node_nr_active - which makes @max_active consistently
mean system-wide max concurrency regardless of the number of CPUs or
(finally) NUMA nodes. This is a rather invasive and, in places, a bit
clunky; however, the clunkiness rises from the the inherent requirement to
handle the disagreement between the execution locality domain and max
concurrency enforcement domain on some modern machines. See 5797b1c189
("workqueue: Implement system-wide nr_active enforcement for unbound
workqueues") for more details.
- BH workqueue support is added. They are similar to per-CPU workqueues but
execute work items in the softirq context. This is expected to replace
tasklet. However, currently, it's missing the ability to disable and
enable work items which is needed to convert many tasklet users. To avoid
crowding this merge window too much, this will be included in the next
merge window. A separate pull request will be sent for the couple
conversion patches that are currently pending.
- Waiman plugged a long-standing hole in workqueue CPU isolation where
ordered workqueues didn't follow wq_unbound_cpumask updates. Ordered
workqueues now follow the same rules as other unbound workqueues.
- More CPU isolation improvements: Juri fixed another deficit in workqueue
isolation where unbound rescuers don't respect wq_unbound_cpumask.
Leonardo fixed delayed_work timers firing on isolated CPUs.
- Other misc changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7JCQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcnqAP9UP8zEM1la19cilhboDumxmRWyRpV/egFOqsMP
Y5PuoAEAtsBJtQWtm5w46+y+fk3nK2ugXlQio2gH0qQcxX6SdgQ=
=/ovv
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
"This cycle, a lot of workqueue changes including some that are
significant and invasive.
- During v6.6 cycle, unbound workqueues were updated so that they are
more topology aware and flexible, which among other things improved
workqueue behavior on modern multi-L3 CPUs. In the process, commit
636b927eba ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") switched unbound workqueues to use per-CPU
frontend pool_workqueues as a part of increasing front-back mapping
flexibility.
An unwelcome side effect of this change was that this made max
concurrency enforcement per-CPU blowing up the maximum number of
allowed concurrent executions. I incorrectly assumed that this
wouldn't cause practical problems as most unbound workqueue users
are self-regulate max concurrency; however, there definitely are
which don't (e.g. on IO paths) and the drastic increase in the
allowed max concurrency led to noticeable perf regressions in some
use cases.
This is now addressed by separating out max concurrency enforcement
to a separate struct - wq_node_nr_active - which makes @max_active
consistently mean system-wide max concurrency regardless of the
number of CPUs or (finally) NUMA nodes. This is a rather invasive
and, in places, a bit clunky; however, the clunkiness rises from
the the inherent requirement to handle the disagreement between the
execution locality domain and max concurrency enforcement domain on
some modern machines.
See commit 5797b1c189 ("workqueue: Implement system-wide
nr_active enforcement for unbound workqueues") for more details.
- BH workqueue support is added.
They are similar to per-CPU workqueues but execute work items in
the softirq context. This is expected to replace tasklet. However,
currently, it's missing the ability to disable and enable work
items which is needed to convert many tasklet users. To avoid
crowding this merge window too much, this will be included in the
next merge window. A separate pull request will be sent for the
couple conversion patches that are currently pending.
- Waiman plugged a long-standing hole in workqueue CPU isolation
where ordered workqueues didn't follow wq_unbound_cpumask updates.
Ordered workqueues now follow the same rules as other unbound
workqueues.
- More CPU isolation improvements: Juri fixed another deficit in
workqueue isolation where unbound rescuers don't respect
wq_unbound_cpumask. Leonardo fixed delayed_work timers firing on
isolated CPUs.
- Other misc changes"
* tag 'wq-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (54 commits)
workqueue: Drain BH work items on hot-unplugged CPUs
workqueue: Introduce from_work() helper for cleaner callback declarations
workqueue: Control intensive warning threshold through cmdline
workqueue: Make @flags handling consistent across set_work_data() and friends
workqueue: Remove clear_work_data()
workqueue: Factor out work_grab_pending() from __cancel_work_sync()
workqueue: Clean up enum work_bits and related constants
workqueue: Introduce work_cancel_flags
workqueue: Use variable name irq_flags for saving local irq flags
workqueue: Reorganize flush and cancel[_sync] functions
workqueue: Rename __cancel_work_timer() to __cancel_timer_sync()
workqueue: Use rcu_read_lock_any_held() instead of rcu_read_lock_held()
workqueue: Cosmetic changes
workqueue, irq_work: Build fix for !CONFIG_IRQ_WORK
workqueue: Fix queue_work_on() with BH workqueues
async: Use a dedicated unbound workqueue with raised min_active
workqueue: Implement workqueue_set_min_active()
workqueue: Fix kernel-doc comment of unplug_oldest_pwq()
workqueue: Bind unbound workqueue rescuer to wq_unbound_cpumask
kernel/workqueue: Let rescuers follow unbound wq cpumask changes
...
This macro is used to obtain a pointer to an entire struct
when given a pointer to a field in that struct.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Link: https://lore.kernel.org/r/20240219-b4-rbtree-v2-1-0b113aab330d@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, `BStr` is just a type alias of `[u8]`, limiting its
representation to a byte list rather than a character list, which is not
ideal for printing and debugging.
Implement `Display` and `Debug` traits for `BStr` to facilitate easier
printing and debugging.
Also, for this purpose, change `BStr` from a type alias of `[u8]` to a
struct wrapper of `[u8]`.
Co-developed-by: Virgile Andreani <armavica@ulminfo.fr>
Signed-off-by: Virgile Andreani <armavica@ulminfo.fr>
Signed-off-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/ZcSlGMGP-e9HqybA@ohnotp
[ Formatted code comment. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently `ForeignOwnable::from_foreign()` only works for non-null
pointers for the existing `impl`s (e.g. `Box`, `Arc`). In turn, this
means callers may write code like:
```rust
// `p` is a pointer that may be null.
if p.is_null() {
None
} else {
unsafe { Some(Self::from_foreign(ptr)) }
}
```
Add a `try_from_foreign()` method to the trait with a default
implementation that returns `None` if `ptr` is null, otherwise
`Some(from_foreign(ptr))`, so that it can be used by callers instead.
Link: https://github.com/Rust-for-Linux/linux/issues/1057
Signed-off-by: Obei Sideg <linux@obei.io>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/0100018d53f737f8-80c1fe97-0019-40d7-ab69-b1b192785cd7-000000@email.amazonses.com
[ Fixed intra-doc links, improved `SAFETY` comment and reworded commit. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `byte_sub` method was stabilized in Rust 1.75.0. By using that
method, we no longer need the unstable `ptr_metadata` feature for
implementing `Arc::from_raw`.
This brings us one step closer towards not using unstable compiler
features.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240215104601.1267763-1-aliceryhl@google.com
[ Reworded title. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, all macros are reexported with #[macro_export] only, which
means that to access `new_work!` from the workqueue, you need to import
it from the path `kernel::new_work` instead of importing it from the
workqueue module like all other items in the workqueue. By adding
reexports of the macros, it becomes possible to import the macros from
the correct modules.
It's still possible to import the macros from the root, but I don't
think we can do anything about that.
There is no functional change. This is merely a code cleanliness
improvement.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240129145837.1419880-1-aliceryhl@google.com
[ Removed new `use kernel::prelude::*`s, reworded title. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Increases readability by removing `super::` from the link preview
text.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-12-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove explicit targets for doclinks in cases where rustdoc can
determine the correct target by itself. The goal is to reduce unneeded
verbosity in the source code.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-11-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Throughout the code base, blank lines are used before starting a code
block. Adapt outliers to improve consistency within the kernel crate.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-9-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix places where comments include code fragments that are not enclosed
in backticks.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-8-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace instances of 'ref-count[ed]' with 'refcount[ed]' to increase
consistency within the Rust documentation. The latter form is used more
widely in the rest of the kernel:
```console
$ rg '(\*|//).*?\srefcount(|ed)[\s,.]' | wc -l
1605
$ rg '(\*|//).*?\sref-count(|ed)[\s,.]' | wc -l
43
```
(numbers are for commit 052d534373 ("Merge tag 'exfat-for-6.8-rc1'
of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat"))
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-7-0c8af94ed7de@valentinobst.de
[ Reworded to use the kernel's commit description style. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
SAFETY comments should immediately precede the unsafe block they
justify. Move assignment to `bar` past comment as it is safe.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-6-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Throughout the module, bytes with the value zero are referred to as
`NUL` bytes. Adapt the only two outliers.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-5-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Convert existing references to C header files to make use of
Commit bc2e7d5c29 ("rust: support `srctree`-relative links").
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-4-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Every other module ends its first line of documentation with a full
stop. Adapt the only outlier.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-3-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `from_err_ptr` function is safe. There is no need for the call to it
to be inside the unsafe block.
Reword the SAFETY comment to provide a better justification of why the
FFI call is safe.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-2-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes multiple trivial typos in documentation and comments of the
kernel crate.
allocator:
- Fix a trivial list item alignment issue in the last SAFETY comment of
`krealloc_aligned`.
init:
- Replace 'type' with 'trait' in the doc comments of the `PinInit` and
`Init` traits.
- Add colons before starting lists.
- Add spaces between the type and equal sign to respect the code
formatting rules in example code.
- End a sentence with a full stop instead of a colon.
ioctl:
- Replace 'an' with 'a' where appropriate.
str:
- Replace 'Return' with 'Returns' in the doc comment of `bytes_written`
as the text describes what the function does.
sync/lock:
- Fix a trivial list item alignment issue in the Safety section of the
`Backend` trait's description.
sync/lock/spinlock:
- The code in this module operates on spinlocks, not mutexes. Thus,
replace 'mutex' with 'spinlock' in the SAFETY comment of `unlock`.
workqueue:
- Replace "wont" with "won't" in the doc comment of `__enqueue`.
Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-1-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit e563d0a7cd ("workqueue: Break up enum definitions and give
names to the types") gives a name to the `enum` where `WORK_CPU_UNBOUND`
was defined, so `bindgen` changes its output from e.g.:
pub type _bindgen_ty_10 = core::ffi::c_uint;
pub const WORK_CPU_UNBOUND: _bindgen_ty_10 = 64;
to e.g.:
pub type wq_misc_consts = core::ffi::c_uint;
pub const wq_misc_consts_WORK_CPU_UNBOUND: wq_misc_consts = 64;
Thus update Rust's side to match the change (which requires a slight
reformat of the code), fixing the build error.
Closes: https://lore.kernel.org/rust-for-linux/CANiq72=9PZ89bCAVX0ZV4cqrYSLoZWyn-d_K4KpBMHjwUMdC3A@mail.gmail.com/
Fixes: e563d0a7cd ("workqueue: Break up enum definitions and give names to the types")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reduce the chances of compilation failures due to integer type
mismatches in `CondVar`.
When an integer is defined using a #define in C, bindgen doesn't know
which integer type it is supposed to be, so it will just use `u32` by
default (if it fits in an u32). Whenever the right type is something
else, we insert a cast in Rust. However, this means that the code has a
lot of extra casts, and sometimes the code will be missing casts if u32
happens to be correct on the developer's machine, even though the type
might be something else on a different platform.
This patch updates all uses of such constants in
`rust/kernel/sync/condvar.rs` to use constants defined with the right
type. This allows us to remove various unnecessary casts, while also
future-proofing for the case where `unsigned int != u32` (even though
that is unlikely to ever happen in the kernel).
I wrote this patch at the suggestion of Benno in [1].
Link: https://lore.kernel.org/all/nAEg-6vbtX72ZY3oirDhrSEf06TBWmMiTt73EklMzEAzN4FD4mF3TPEyAOxBZgZtjzoiaBYtYr3s8sa9wp1uYH9vEWRf2M-Lf4I0BY9rAgk=@proton.me/ [1]
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-4-88e0c871cc05@google.com
[ Added note on the unlikeliness of `sizeof(int)` changing. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sleep on a condition variable with a timeout.
This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.
Note that it is not enough to avoid jiffies by introducing a variant of
`CondVar::wait_timeout` that takes the timeout in msecs because we need
to be able to restart the sleep with the remaining sleep duration if it
is interrupted, and if the API takes msecs rather than jiffies, then
that would require a conversion roundtrip jiffies->msecs->jiffies that
is best avoided.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-3-88e0c871cc05@google.com
[ Added `CondVarTimeoutResult` re-export and fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Defines type aliases and conversions for msecs and jiffies.
This is used by Rust Binder for process freezing. There, we want to
sleep until the freeze operation completes, but we want to be able to
abort the process freezing if it doesn't complete within some timeout.
The freeze timeout is supplied in msecs.
Note that we need to convert to jiffies in Binder. It is not enough to
introduce a variant of `CondVar::wait_timeout` that takes the timeout in
msecs because we need to be able to restart the sleep with the remaining
sleep duration if it is interrupted, and if the API takes msecs rather
than jiffies, then that would require a conversion roundtrip jiffies->
msecs->jiffies that is best avoided.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-2-88e0c871cc05@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Wake up another thread synchronously.
This method behaves like `notify_one`, except that it hints to the
scheduler that the current thread is about to go to sleep, so it should
schedule the target thread on the same CPU.
This is used by Rust Binder as a performance optimization. When sending
a transaction to a different process, we usually know which thread will
handle it, so we can schedule that thread for execution next on this
CPU for better cache locality.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240108-rb-new-condvar-methods-v4-1-88e0c871cc05@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions
(never called) in #[vtable] is the recommended way.
Note that no functional changes in this patch.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The relative paths like the following are bothersome and don't work
with `O=` builds:
//! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h).
This updates such links by using the `srctree`-relative link feature
introduced in 6.8-rc1 like:
//! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fields named "wait_list" usually are of type "struct list_head". To
avoid confusion and because it is of type
"Opaque<bindings::wait_queue_head>" we are renaming "wait_list" to
"wait_queue_head".
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240105012930.1426214-1-charmitro@posteo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the next upgrade to the Rust toolchain, from 1.74.1 to 1.75.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").
# Unstable features
The `const_maybe_uninit_zeroed` unstable feature [3] was stabilized in
Rust 1.75.0, which we were using in the PHYLIB abstractions.
The only unstable features allowed to be used outside the `kernel` crate
are still `new_uninit,offset_of`, though other code to be upstreamed
may increase the list.
Please see [4] for details.
# Other improvements
Rust 1.75.0 stabilized `pointer_byte_offsets` [5] which we could
potentially use as an alternative for `ptr_metadata` in the future.
# Required changes
For this upgrade, no changes were required (i.e. on our side).
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1750-2023-12-28 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/rust-lang/rust/issues/91850 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [4]
Link: https://github.com/rust-lang/rust/issues/96283 [5]
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20231224172128.271447-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was fairly
small (and we did not have two upgrades).
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1.
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting.
- Support 'srctree'-relative links in Rust code documentation.
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen').
- Suppress searching builtin sysroot to avoid confusion with installed
sysroots, needed for the to-be-merged arm64 support which uses
a builtin target.
- Ignore '__preserve_most' functions for 'bindgen'.
- Reduce header inclusion bloat in exports.
'kernel' crate:
- Implement 'Debug' for 'CString'.
- Make 'CondVar::wait()' an uninterruptible wait.
'macros' crate:
- Update 'paste!' to accept string literals.
- Improve '#[vtable]' documentation.
Documentation:
- Add testing section (KUnit and 'rusttest' target).
- Remove 'CC=clang' mentions.
- Clarify that 'rustup override' applies to build directory.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmWbS68ACgkQGXyLc2ht
IW1V4w//ToMxdyHTnoqFyzI5X4mzxaV8vhEViGs5eXG87d0E8WwSRCA4weEGTbER
06huyUI1tTbYgpsOEyuUSEDd/0GiA+sGseaqS4kJ7+aA6fSof7E6nA4d2SURBb2O
0F1c3DucGbeDzZz0GZDWSnoF3RwQWRz1hPR9scMcQi4d69r5mT+HdD1UryXaGkXQ
9gDeWhmqO4EzEjFR/gd0fYxd/z7OgXsaUQJk4fpDGDJ+/USPzrE99iGoHINB6VRA
mWsq5g0Po6aPwmlPDcW6bgRrLEWpzHftCNAZjQbjfT4mKjYJg4GJaqShCfM+wkZN
3NVLxueJ0ZzLXmHxpMjx9WdHM1j/MM31W/n0/Opgnalv0lETZdNKy/Ep1Fj+AOTP
kKwU2bQT66We78cjY6Fh2noCNv3td9g59/q8TfKAFxsy16BqL/RLqQ21Ft0hyLO+
ebvOOO0o2ul/7onaOFhrXMRdVvaAXeK1c64kiGRUr16X5D5UcvR+ZkJ/LVf2ozvS
mDtzXB561WCyVSfTFz0buGdudO4NWE+7Dh7msXhE6W6faFN+7MA6pfWZro64k+az
gEmcCcwjUMpV0IrvCWH0dW1NG6XGqGQ/PkGTYdIyZ+1GajEhwNILuIPKuM8VXwLZ
zmu+y4xdpPd7hMjncopCsb8G3DidAN7zeYea5tnAGILCmOZMOX4=
=w+n8
-----END PGP SIGNATURE-----
Merge tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. In terms of lines, this time
the 'alloc' version upgrade is less prominent, given that it was
fairly small (and we did not have two upgrades)
Toolchain and infrastructure:
- Upgrade to Rust 1.74.1
The patch release includes a fix for an ICE that the Apple AGX GPU
driver was hitting
- Support 'srctree'-relative links in Rust code documentation
- Automate part of the manual constants handling (i.e. the ones not
recognised by 'bindgen')
- Suppress searching builtin sysroot to avoid confusion with
installed sysroots, needed for the to-be-merged arm64 support which
uses a builtin target
- Ignore '__preserve_most' functions for 'bindgen'
- Reduce header inclusion bloat in exports
'kernel' crate:
- Implement 'Debug' for 'CString'
- Make 'CondVar::wait()' an uninterruptible wait
'macros' crate:
- Update 'paste!' to accept string literals
- Improve '#[vtable]' documentation
Documentation:
- Add testing section (KUnit and 'rusttest' target)
- Remove 'CC=clang' mentions
- Clarify that 'rustup override' applies to build directory"
* tag 'rust-6.8' of https://github.com/Rust-for-Linux/linux:
docs: rust: Clarify that 'rustup override' applies to build directory
docs: rust: Add rusttest info
docs: rust: remove `CC=clang` mentions
rust: support `srctree`-relative links
rust: sync: Makes `CondVar::wait()` an uninterruptible wait
rust: upgrade to Rust 1.74.1
rust: Suppress searching builtin sysroot
rust: macros: improve `#[vtable]` documentation
rust: macros: update 'paste!' macro to accept string literals
rust: bindings: rename const binding using sed
rust: Ignore preserve-most functions
rust: replace <linux/module.h> with <linux/export.h> in rust/exports.c
rust: kernel: str: Implement Debug for CString
Some of our links use relative paths in order to point to files in the
source tree, e.g.:
//! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h)
/// [`struct mutex`]: ../../../../include/linux/mutex.h
These are problematic because they are hard to maintain and do not support
`O=` builds.
Instead, provide support for `srctree`-relative links, e.g.:
//! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
/// [`struct mutex`]: srctree/include/linux/mutex.h
The links are fixed after `rustdoc` generation to be based on the absolute
path to the source tree.
Essentially, this is the automatic version of Tomonori's fix [1],
suggested by Gary [2].
Suggested-by: Gary Guo <gary@garyguo.net>
Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Closes: https://lore.kernel.org/r/20231026.204058.2167744626131849993.fujita.tomonori@gmail.com [1]
Fixes: 48fadf4400 ("docs: Move rustdoc output, cross-reference it")
Link: https://lore.kernel.org/rust-for-linux/20231026154525.6d14b495@eugeo/ [2]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20231215235428.243211-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, `CondVar::wait()` is an interruptible wait, and this is
different than `wait_event()` in include/linux/wait.h (which is an
uninterruptible wait). To avoid confusion between different APIs on the
interruptible/uninterruptible, make `CondVar::wait()` an uninterruptible
wait same as `wait_event()`, also rename the old `wait()` to
`CondVar::wait_interruptible()`.
Spotted-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Link: https://lore.kernel.org/r/20231214200421.690629-1-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This macro creates an array of kernel's `struct phy_driver` and
registers it. This also corresponds to the kernel's
`MODULE_DEVICE_TABLE` macro, which embeds the information for module
loading into the module binary file.
A PHY driver should use this macro.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
