Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper to get codec dai by name.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assume the codecs in a dai link are all the same.
So that we get codec dai with snd_soc_rtd_to_codec(rtd, 0) in dai_links
->init callback. However, a link can include different codecs.
For example, a 4 speakers link can consist of rt712 and rt1316.
Therefore, we need to select the codec dai by name in the dai link.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2 amps can be in the same or different dai links. To handle this, the
existing code implements different spk_init functions to add dapm routes
for different amps. However, sof_sdw.c doesn't support non-aggregated
amp any more since it used pre-defined BE id.
With that assumption, combine the spk_init functions together.
This is a preparation of putting different types amps in a single dai
link.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an new field link_order_overwrite to sof_card_private structure to
support machine drivers which DAI link order is different from the
order used in sof_rt5682 (i.e. GLK boards or no-codec boards).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some dmi quirks are duplicated since codec and amplifier type are
removed from board quirk. Remove redundant quirks.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "mtl_rt5682_def" board to reduce
the number of mtl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "rpl_rt5682_def" board to reduce
the number of rpl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "adl_rt5682_def" board to reduce
the number of adl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "tgl_rt5682_def" board to reduce
the number of tgl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "jsl_rt5682_def" board to reduce
the number of jsl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
In some cases it may be desirable to provide default initial
configuration for FW module using payload. To facilitate such solution
extend topology to contain initial config information, parse it and then
send data to FW if present.
Amadeusz Sławiński (3):
ASoC: Intel: avs: UAPI: Add tokens for initial config feature
ASoC: Intel: avs: Add topology parsing support for initial config
ASoC: Intel: avs: Send initial config to module if present
include/uapi/sound/intel/avs/tokens.h | 9 ++
sound/soc/intel/avs/path.c | 33 ++++++
sound/soc/intel/avs/topology.c | 164 +++++++++++++++++++++++++-
sound/soc/intel/avs/topology.h | 13 ++
4 files changed, 217 insertions(+), 2 deletions(-)
--
2.34.1
'config SND_PXA2XX_AC97' is already present in sound/arm/Kconfig with
a prompt.
Commit 734c2d4bb7 ("[ALSA] ASoC pxa2xx build support") redundantly
added the second one to sound/soc/pxa/Kconfig.
Remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240204091424.38306-1-masahiroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_WCD939X has an optional dependency on TYPEC, so the newly added
SND_SOC_WCD939X_SDW option that selects it needs the same dependency, otherwise
it can fail randconfig builds like:
WARNING: unmet direct dependencies detected for SND_SOC_WCD939X
Depends on [m]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_WCD939X_SDW [=y] && (SOUNDWIRE [=y] || !SOUNDWIRE [=y]) && (TYPEC [=m]
|| !TYPEC [=m])
Selected by [y]:
- SND_SOC_WCD939X_SDW [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=y]
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_soc_codec_remove':
wcd939x.c:(.text+0x1950): undefined reference to `wcd_clsh_ctrl_free'
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_codec_ear_dac_event':
wcd939x.c:(.text+0x35d8): undefined reference to `wcd_clsh_ctrl_set_state'
arm-linux-gnueabi-ld: sound/soc/codecs/wcd939x.o: in function `wcd939x_codec_enable_hphr_pa':
wcd939x.c:(.text+0x39b0): undefined reference to `wcd_clsh_ctrl_set_state'
arm-linux-gnueabi-ld: wcd939x.c:(.text+0x39dc): undefined reference to `wcd_clsh_set_hph_mode'
arm-linux-gnueabi-ld: wcd939x.c:(.text+0x3bc0): undefined reference to `wcd_clsh_ctrl_set_state'
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240204212207.3158914-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-amd-sdw-acpi.ko module is under CONFIG_SND_SOC_AMD_ACP_COMMON but
selected from SoF, which causes build failures in some randconfig builds
that enable SOF but not ACP:
WARNING: unmet direct dependencies detected for SND_AMD_SOUNDWIRE_ACPI
Depends on [n]: SOUND [=m] && SND [=m] && SND_SOC [=m] && SND_SOC_AMD_ACP_COMMON [=n] && ACPI [=y]
Selected by [m]:
- SND_SOC_SOF_AMD_SOUNDWIRE_LINK_BASELINE [=m] && SOUND [=m] && SND [=m] && SND_SOC [=m] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_AMD_TOPLEVEL [=m] && ACPI [=y]
ERROR: modpost: "amd_sdw_scan_controller" [sound/soc/sof/amd/snd-sof-amd-acp.ko] undefined!
Change the Makefile and Kconfig to allow it to get built regardless
of CONFIG_SND_SOC_AMD_ACP_COMMON.
Fixes: d948218424 ("ASoC: SOF: amd: add code for invoking soundwire manager helper functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240204212207.3158914-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Synchronise the headphone ilimit work functions when removing the
component. These can only trigger whilst the headphone is enabled which
shouldn't be possible once the component is removed but the works rely
on the stashed component pointer so they should be shut down before the
code moves on from component remove.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240202140619.1068560-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the component is removed the stashed component pointer in the
CODECs private struct should also be cleared to prevent use of a stale
pointer.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240202140619.1068560-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series is to redesign existing platform device creation logic
for SoundWire managers and Implement generic functions for SoundWire
manager probe, start and exit sequence which are common for both Legacy
(NO DSP enabled) and SOF stack, and add SoundWire Interface support for
AMD SOF stack (ACP 6.3 based platform).
The patch series was reviewed in
https://github.com/thesofproject/linux/pull/4699
Refactor acp driver pm ops to support SoundWire interface.
When SoundWire configuration is enabled, In case of ClockStopMode,
DSP soft reset should be applied and for rest of the scenarios
acp init/deinit sequence should be invoked.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240129055147.1493853-14-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add code for invoking Soundwire manager helper functions
when SoundWire configuration is selected.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240129055147.1493853-8-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement generic function for scanning SoundWire controller.
Same function will be used for legacy and sof stack for AMD platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_request_irq() call is done for "dma_rt" interrupt but the error
message printed "dma_tx" interrupt on failure, fix this by updating
dma_tx -> dma_rt in dev_err_probe() message. While at it aligned the code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 38c042b59a ("ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130150822.327434-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The layout is configured as:
- Link0: CS42L43 Jack and mics (2ch)
- Link2: 2x CS35L56 Speaker (amps 3 and 4, right)
- Link3: 2x CS35L56 Speaker (amps 1 and 2, left)
Corresponding SOF topology:
https://github.com/thesofproject/sof/pull/8773
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://msgid.link/r/20240123113246.75539-1-mstrozek@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use fls to calculate the pre-divider and input frequency for the PLL,
this is marginally faster than the previous loop.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the code in cs42l43_mask_to_slots() to use for_each_set_bit().
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use USEC_PER_MSEC rather than the hard coded value of 1000.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst reading cirrus,buttons-ohms the error from
device_property_read_u32_array() is not checked, whilst there is a
preceding device_property_count_u32() which is checked the property
read can still fail. Add the missing check.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some missing commas, refactor a couple small bits of code.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240125103117.2622095-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use more forward declarations, move header guards to cover other
includes, and rely less on including headers through other headers.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240125103117.2622095-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ES8326 features a headphone volume control register and four DAC
volume control registers.
We add new volume Kcontrols for these registers to enhance the
configurability of the volume settings, providing users with
greater flexibility.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240124064806.30511-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the wcd939x codec driver, there are two instances where semicolons
are used after closing braces of a switch-case statement. These
semicolons are not required and do not adhere to the coding style
guidelines.
This patch removes the unnecessary semicolons at the end of the
switch-case statements which cleans up the code and ensures consistency
with the rest of the kernel coding style.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://msgid.link/r/20240124004425.54020-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The framer codec interacts with a framer.
It allows to use some of the framer timeslots as audio channels to
transport audio data over the framer E1/T1/J1 lines.
It also reports line carrier detection events through the ALSA jack
detection feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://msgid.link/r/20240123165615.250303-2-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan+linaro@kernel.org>:
To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.
Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).
The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.
Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.
Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.
There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).
[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
