Dell All In One (AIO) models released after 2017 may use a backlight
controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
The Dell OptiPlex 5480 AIO has an ACPI device for one of its UARTs with
the above _HID + _CID. Loading the dell-uart-backlight driver fails with
the following errors:
[ 18.261353] dell_uart_backlight serial0-0: Timed out waiting for response.
[ 18.261356] dell_uart_backlight serial0-0: error -ETIMEDOUT: getting firmware version
[ 18.261359] dell_uart_backlight serial0-0: probe with driver dell_uart_backlight failed with error -110
Indicating that there is no backlight controller board attached to
the UART, while the GPU's native backlight control method does work.
Add a quirk to use the GPU's native backlight control method on this model.
Fixes: cd8e468efb ("ACPI: video: Add Dell UART backlight controller detection")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240918153849.37221-1-hdegoede@redhat.com
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240917134246.584026-1-mikisabate@gmail.com
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
notify_hwp_interrupt() is called via sysvec_thermal() ->
smp_thermal_vector() -> intel_thermal_interrupt() in hard irq context.
For this reason it must not use a simple spin_lock that sleeps with
PREEMPT_RT enabled. So convert it to a raw spinlock.
Reported-by: xiao sheng wen <atzlinux@sina.com>
Link: https://bugs.debian.org/1076483
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: xiao sheng wen <atzlinux@sina.com>
Link: https://patch.msgid.link/20240919081121.10784-2-ukleinek@debian.org
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Disable ratelimiting for btrfs_printk when CONFIG_BTRFS_DEBUG is
enabled. This allows for more verbose output which is often needed by
functions like btrfs_dump_space_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1a ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running checkpatch.pl against a patch that modifies the
btrfs_qgroup_extent event class, it complained about using a comma instead
of a semicolon:
$ ./scripts/checkpatch.pl qgroups/0003-btrfs-qgroups-remove-bytenr-field-from-struct-btrfs_.patch
WARNING: Possible comma where semicolon could be used
#215: FILE: include/trace/events/btrfs.h:1720:
+ __entry->bytenr = bytenr,
__entry->num_bytes = rec->num_bytes;
total: 0 errors, 1 warnings, 184 lines checked
So replace the comma with a semicolon to silence checkpatch and possibly
other tools. It also makes the code consistent with the rest.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the inception of relocation we have maintained the backref cache
across transaction commits, updating the backref cache with the new
bytenr whenever we COWed blocks that were in the cache, and then
updating their bytenr once we detected a transaction id change.
This works as long as we're only ever modifying blocks, not changing the
structure of the tree.
However relocation does in fact change the structure of the tree. For
example, if we are relocating a data extent, we will look up all the
leaves that point to this data extent. We will then call
do_relocation() on each of these leaves, which will COW down to the leaf
and then update the file extent location.
But, a key feature of do_relocation() is the pending list. This is all
the pending nodes that we modified when we updated the file extent item.
We will then process all of these blocks via finish_pending_nodes, which
calls do_relocation() on all of the nodes that led up to that leaf.
The purpose of this is to make sure we don't break sharing unless we
absolutely have to. Consider the case that we have 3 snapshots that all
point to this leaf through the same nodes, the initial COW would have
created a whole new path. If we did this for all 3 snapshots we would
end up with 3x the number of nodes we had originally. To avoid this we
will cycle through each of the snapshots that point to each of these
nodes and update their pointers to point at the new nodes.
Once we update the pointer to the new node we will drop the node we
removed the link for and all of its children via btrfs_drop_subtree().
This is essentially just btrfs_drop_snapshot(), but for an arbitrary
point in the snapshot.
The problem with this is that we will never reflect this in the backref
cache. If we do this btrfs_drop_snapshot() for a node that is in the
backref tree, we will leave the node in the backref tree. This becomes
a problem when we change the transid, as now the backref cache has
entire subtrees that no longer exist, but exist as if they still are
pointed to by the same roots.
In the best case scenario you end up with "adding refs to an existing
tree ref" errors from insert_inline_extent_backref(), where we attempt
to link in nodes on roots that are no longer valid.
Worst case you will double free some random block and re-use it when
there's still references to the block.
This is extremely subtle, and the consequences are quite bad. There
isn't a way to make sure our backref cache is consistent between
transid's.
In order to fix this we need to simply evict the entire backref cache
anytime we cross transid's. This reduces performance in that we have to
rebuild this backref cache every time we change transid's, but fixes the
bug.
This has existed since relocation was added, and is a pretty critical
bug. There's a lot more cleanup that can be done now that this
functionality is going away, but this patch is as small as possible in
order to fix the problem and make it easy for us to backport it to all
the kernels it needs to be backported to.
Followup series will dismantle more of this code and simplify relocation
drastically to remove this functionality.
We have a reproducer that reproduced the corruption within a few minutes
of running. With this patch it survives several iterations/hours of
running the reproducer.
Fixes: 3fd0a5585e ("Btrfs: Metadata ENOSPC handling for balance")
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes do not generate stripe_extent entries in the RAID stripe
tree, as the RAID stripe-tree feature initially was designed with a
zoned filesystem in mind and on a zoned filesystem, we do not allow NOCOW
writes. But the RAID stripe-tree feature is independent from the zoned
feature, so we must also do NOCOW writes for RAID stripe-tree filesystems.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only user (the mesa gallium driver) is already assuming explicit
synchronization and doing the export/import dance on shared BOs. The
only reason we were registering ourselves as writers on external BOs
is because Xe, which was the reference back when we developed Panthor,
was doing so. Turns out Xe was wrong, and we really want bookkeep on
all registered fences, so userspace can explicitly upgrade those to
read/write when needed.
Fixes: 4bdca11507 ("drm/panthor: Add the driver frontend block")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905070155.3254011-1-boris.brezillon@collabora.com
If deferred operations are pending, we want to wait for those to
land before declaring the queue blocked on a SYNC_WAIT. We need
this to deal with the case where the sync object is signalled through
a deferred SYNC_{ADD,SET} from the same queue. If we don't do that
and the group gets scheduled out before the deferred SYNC_{SET,ADD}
is executed, we'll end up with a timeout, because no external
SYNC_{SET,ADD} will make the scheduler reconsider the group for
execution.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905071914.3278599-1-boris.brezillon@collabora.com
drm_gpuvm_bo_obtain_prealloc() will call drm_gpuvm_bo_put() on our
pre-allocated BO if the <BO,VM> association exists. Given we
only have one ref on preallocated_vm_bo, drm_gpuvm_bo_destroy() will
be called immediately, and we have to hold the VM resv lock when
calling this function.
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913112722.492144-1-boris.brezillon@collabora.com
Since commit 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
the FMODE_UNSIGNED_OFFSET flag has been moved to fop_flags and renamed,
but the patch failed to make the changes for the panthor driver.
When user space opens the render node the WARN() added by the patch
gets triggered.
Fixes: 641bb4394f ("fs: move FMODE_UNSIGNED_OFFSET to fop_flags")
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920102802.2483367-1-liviu.dudau@arm.com
Improve readability of kvfree_rcu_queue_batch() function
in away that, after a first batch queuing, the loop is break
and success value is returned to a caller.
There is no reason to loop and check batches further as all
outstanding objects have already been picked and attached to
a certain batch to complete an offloading.
Fixes: 2b55d6a42d ("rcu/kvfree: Add kvfree_rcu_barrier() API")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/ZvWUt2oyXRsvJRNc@pc636/T/
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The fix implemented in commit 4ec10268ed ("mm, slab: unlink slabinfo,
sysfs and debugfs immediately") caused a subtle side effect due to which
while destroying the kmem cache, the code path would never get into
sysfs_slab_release() function even though SLAB_SUPPORTS_SYSFS is defined
and slab state is FULL. Due to this side effect, we would never release
kobject defined for kmem cache and leak the associated memory.
The issue here's with the use of __is_defined() macro in kmem_cache_
release(). The __is_defined() macro expands to __take_second_arg(
arg1_or_junk 1, 0). If "arg1_or_junk" is defined to 1 then it expands to
__take_second_arg(0, 1, 0) and returns 1. If "arg1_or_junk" is NOT defined
to any value then it expands to __take_second_arg(... 1, 0) and returns 0.
In this particular issue, SLAB_SUPPORTS_SYSFS is defined without any
associated value and that causes __is_defined(SLAB_SUPPORTS_SYSFS) to
always evaluate to 0 and hence it would never invoke sysfs_slab_release().
This patch helps fix this issue by defining SLAB_SUPPORTS_SYSFS to 1.
Fixes: 4ec10268ed ("mm, slab: unlink slabinfo, sysfs and debugfs immediately")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs9YCCcfmdxN43-9H3HnTYQsRtTYw1Kzq-L468GfLKAENA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b5 ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f641500 ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In case there is any sort of clock controller attached to this I2C bus
controller, for example Versaclock or even an AIC32x4 I2C codec, then
an I2C transfer triggered from the clock controller clk_ops .prepare
callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex.
This is because the clock controller first grabs the prepare_lock mutex
and then performs the prepare operation, including its I2C access. The
I2C access resumes this I2C bus controller via .runtime_resume callback,
which calls clk_prepare_enable(), which attempts to grab the prepare_lock
mutex again and deadlocks.
Since the clock are already prepared since probe() and unprepared in
remove(), use simple clk_enable()/clk_disable() calls to enable and
disable the clock on runtime suspend and resume, to avoid hitting the
prepare_lock mutex.
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Fixes: 4e7bca6fc0 ("i2c: i2c-stm32f7: add PM Runtime support")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It has been a while since James had any significant bandwidth to
review KVM/arm64 patches. But in the meantime, Joey has stepped up
and did a really good job reviewing some terrifying patch series.
Having talked with the interested parties, it appears that James
is unlikely to have time for KVM in the near future, and that Joey
is willing to take more responsibilities.
So let's appoint Joey as an official reviewer, and give James some
breathing space, as well as my personal thanks. I'm sure he will
be back one way or another!
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240927104956.1223658-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When pKVM saves and restores the host floating point state on a SVE system,
it programs the vector length in ZCR_EL2.LEN to be whatever the maximum VL
for the PE is. But it uses a buffer allocated with kvm_host_sve_max_vl, the
maximum VL shared by all PEs in the system. This means that if we run on a
system where the maximum VLs are not consistent, we will overflow the buffer
on PEs which support larger VLs.
Since the host will not currently attempt to make use of non-shared VLs, fix
this by explicitly setting the EL2 VL to be the maximum shared VL when we
save and restore. This will enforce the limit on host VL usage. Should we
wish to support asymmetric VLs, this code will need to be updated along with
the required changes for the host:
https://lore.kernel.org/r/20240730-kvm-arm64-fix-pkvm-sve-vl-v6-0-cae8a2e0bd66@kernel.org
Fixes: b5b9955617 ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240912-kvm-arm64-limit-guest-vl-v2-1-dd2c29cb2ac9@kernel.org
[maz: added punctuation to the commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
On an error, hyp_vcpu will be accessed while this memory has already
been relinquished to the host and unmapped from the hypervisor. Protect
the CPTR assignment with an early return.
Fixes: b5b9955617 ("KVM: arm64: Eagerly restore host fpsimd/sve state in pKVM")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20240919110500.2345927-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
This patch doesn't change runtime at all, it's just for kernel hardening.
The "count" here comes from the user and on 32bit systems, it leads to
integer wrapping when we pass it to compute_user_elem_size():
alloc_size = compute_user_elem_size(private_size, count);
However, the integer over is harmless because later "count" is checked
when we pass it to snd_ctl_new():
err = snd_ctl_new(&kctl, count, access, file);
These days as part of kernel hardening we're trying to avoid integer
overflows when they affect size_t type. So to avoid the integer overflow
copy the check from snd_ctl_new() and do it at the start of the
snd_ctl_elem_add() function as well.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/5457e8c1-01ff-4dd9-b49c-15b817f65ee7@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Kconfig logic to select HAVE_DYNAMIC_FTRACE_WITH_ARGS is incorrect,
and HAVE_DYNAMIC_FTRACE_WITH_ARGS may be selected when it is not
supported by the combination of clang and GNU LD, resulting in link-time
errors:
aarch64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.meminit.data' in mm/sparse.o] sections
aarch64-linux-gnu-ld: final link failed: bad value
... which can be seen when building with CC=clang using a binutils
version older than 2.36.
We originally fixed that in commit:
45bd895180 ("arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang")
... by splitting the "select HAVE_DYNAMIC_FTRACE_WITH_ARGS" statement
into separete CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS and
GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS options which individually select
HAVE_DYNAMIC_FTRACE_WITH_ARGS.
Subsequently we accidentally re-introduced the common "select
HAVE_DYNAMIC_FTRACE_WITH_ARGS" statement in commit:
26299b3f6b ("ftrace: arm64: move from REGS to ARGS")
... then we removed it again in commit:
68a63a412d ("arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y")
... then we accidentally re-introduced it again in commit:
2aa6ac0351 ("arm64: ftrace: Add direct call support")
Fix this for the third time by keeping the unified select statement and
making this depend onf either GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS or
CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS. This is more consistent with
usual style and less likely to go wrong in future.
Fixes: 2aa6ac0351 ("arm64: ftrace: Add direct call support")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930120448.3352564-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab ("arm64: errata: Expand speculative SSBS workaround")
* 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)")
Since then, a (hopefully final) batch of updates have been published,
with two more affected CPUs. For the affected CPUs the existing
mitigation is sufficient, as described in their respective Software
Developer Errata Notice (SDEN) documents:
* Cortex-A715 (MP148) SDEN v15.0, erratum 3456084
https://developer.arm.com/documentation/SDEN-2148827/1500/
* Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111
https://developer.arm.com/documentation/SDEN-3050973/0500/
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list, and update silicon-errata.rst and the
Kconfig text accordingly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add cputype definitions for Neoverse-N3. These will be used for errata
detection in subsequent patches.
These values can be found in Table A-261 ("MIDR_EL1 bit descriptions")
in issue 02 of the Neoverse-N3 TRM, which can be found at:
https://developer.arm.com/documentation/107997/0000/?lang=en
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240930111705.3352047-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Certain portions of code always need to be position-independent
regardless of CONFIG_RELOCATABLE, including code which is executed in an
idmap or which is executed before relocations are applied. In some
kernel configurations the LLD linker generates position-dependent
veneers for such code, and when executed these result in early boot-time
failures.
Marc Zyngier encountered a boot failure resulting from this when
building a (particularly cursed) configuration with LLVM, as he reported
to the list:
https://lore.kernel.org/linux-arm-kernel/86wmjwvatn.wl-maz@kernel.org/
In Marc's kernel configuration, the .head.text and .rodata.text sections
end up more than 128MiB apart, requiring a veneer to branch between the
two:
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w _text
| ffff800080000000 g .head.text 0000000000000000 _text
| [mark@lakrids:~/src/linux]% usekorg 14.1.0 aarch64-linux-objdump -t vmlinux | grep -w primary_entry
| ffff8000889df0e0 g .rodata.text 000000000000006c primary_entry,
... consequently, LLD inserts a position-dependent veneer for the branch
from _stext (in .head.text) to primary_entry (in .rodata.text):
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64AbsLongThunk_primary_entry>
...
| ffff800080010000 <__AArch64AbsLongThunk_primary_entry>:
| ffff800080010000: 58000050 ldr x16, ffff800080010008 <__AArch64AbsLongThunk_primary_entry+0x8>
| ffff800080010004: d61f0200 br x16
| ffff800080010008: 889df0e0 .word 0x889df0e0
| ffff80008001000c: ffff8000 .word 0xffff8000
... and as this is executed early in boot before the kernel is mapped in
TTBR1 this results in a silent boot failure.
Fix this by passing '--pic-veneer' to the linker, which will cause the
linker to use position-independent veneers, e.g.
| ffff800080000000 <_text>:
| ffff800080000000: fa405a4d ccmp x18, #0x0, #0xd, pl // pl = nfrst
| ffff800080000004: 14003fff b ffff800080010000 <__AArch64ADRPThunk_primary_entry>
...
| ffff800080010000 <__AArch64ADRPThunk_primary_entry>:
| ffff800080010000: f004e3f0 adrp x16, ffff800089c8f000 <__idmap_text_start>
| ffff800080010004: 91038210 add x16, x16, #0xe0
| ffff800080010008: d61f0200 br x16
I've opted to pass '--pic-veneer' unconditionally, as:
* In addition to solving the boot failure, these sequences are generally
nicer as they require fewer instructions and don't need to perform
data accesses.
* While the position-independent veneer sequences have a limited +/-2GiB
range, this is not a new restriction. Even kernels built with
CONFIG_RELOCATABLE=n are limited to 2GiB in size as we have several
structues using 32-bit relative offsets and PPREL32 relocations, which
are similarly limited to +/-2GiB in range. These include extable
entries, jump table entries, and alt_instr entries.
* GNU LD defaults to using position-independent veneers, and supports
the same '--pic-veneer' option, so this change is not expected to
adversely affect GNU LD.
I've tested with GNU LD 2.30 to 2.42 inclusive and LLVM 13.0.1 to 19.1.0
inclusive, using the kernel.org binaries from:
* https://mirrors.edge.kernel.org/pub/tools/crosstool/
* https://mirrors.edge.kernel.org/pub/tools/llvm/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marc Zyngier <maz@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240927101838.3061054-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: 65ab45b906 ("ASoC: Intel: soc-acpi: Add match entries for some cs42l43 laptops")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241001061738.34854-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Regression Description:
Depending on the options specified for the GRE tunnel device, small
packets may be dropped. This occurs because the pskb_network_may_pull
function fails due to the packet's insufficient length.
For example, if only the okey option is specified for the tunnel device,
original (before encapsulation) packets smaller than 28 bytes (including
the IPv4 header) will be dropped. This happens because the required
length is calculated relative to the network header, not the skb->head.
Here is how the required length is computed and checked:
* The pull_len variable is set to 28 bytes, consisting of:
* IPv4 header: 20 bytes
* GRE header with Key field: 8 bytes
* The pskb_network_may_pull function adds the network offset, shifting
the checkable space further to the beginning of the network header and
extending it to the beginning of the packet. As a result, the end of
the checkable space occurs beyond the actual end of the packet.
Instead of ensuring that 28 bytes are present in skb->head, the function
is requesting these 28 bytes starting from the network header. For small
packets, this requested length exceeds the actual packet size, causing
the check to fail and the packets to be dropped.
This issue affects both locally originated and forwarded packets in
DMVPN-like setups.
How to reproduce (for local originated packets):
ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \
local <your-ip> remote 0.0.0.0
ip link set mtu 1400 dev gre1
ip link set up dev gre1
ip address add 192.168.13.1/24 dev gre1
ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1
ping -s 1374 -c 10 192.168.13.2
tcpdump -vni gre1
tcpdump -vni <your-ext-iface> 'ip proto 47'
ip -s -s -d link show dev gre1
Solution:
Use the pskb_may_pull function instead the pskb_network_may_pull.
Fixes: 80d875cfc9 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()")
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 740ff03d72 because
current PixArt detection is too greedy and claims devices that are
not PixArt.
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Increase the timeout for checking the busy bit of the VLAN Tag register
from 10µs to 500ms. This change is necessary to accommodate scenarios
where Energy Efficient Ethernet (EEE) is enabled.
Overnight testing revealed that when EEE is active, the busy bit can
remain set for up to approximately 300ms. The new 500ms timeout provides
a safety margin.
Fixes: ed64639bc1 ("net: stmmac: Add support for VLAN Rx filtering")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
iter_folioq_get_pages() decides to advance to the next folioq slot when
it has reached the end of the current folio. However, it is checking
offset, which is the beginning of the current part, instead of
iov_offset, which is adjusted to the end of the current part, so it
doesn't advance the slot when it's supposed to. As a result, on the next
iteration, we'll use the same folio with an out-of-bounds offset and
return an unrelated page.
This manifested as various crashes and other failures in 9pfs in drgn's
VM testing setup and BPF CI.
Fixes: db0aa2e956 ("mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios")
Link: https://lore.kernel.org/linux-fsdevel/20240923183432.1876750-1-chantr4@gmail.com/
Tested-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/cbaf141ba6c0e2e209717d02746584072844841a.1727722269.git.osandov@fb.com
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
RISC-V perf driver does not yet support PERF_TYPE_BREAKPOINT. It would
be more appropriate to return -EOPNOTSUPP or -ENOENT for this type in
pmu_sbi_event_map. Considering that other implementations return -ENOENT
for unsupported perf types, let's synchronize this behavior. Due to this
reason, a riscv bpf testcases perf_skip fail. Meanwhile, align that
behavior to the rest of proper place.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: 9b3e150e31 ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Fixes: 16d3b1af09 ("perf: RISC-V: Check standard event availability")
Fixes: e999143459 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240831071520.1630360-1-pulehui@huaweicloud.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Eric Dumazet says:
====================
net: two fixes for qdisc_pkt_len_init()
Inspired by one syzbot report.
At least one qdisc (fq_codel) depends on qdisc_skb_cb(skb)->pkt_len
having a sane value (not zero)
With the help of af_packet, syzbot was able to fool qdisc_pkt_len_init()
to precisely set qdisc_skb_cb(skb)->pkt_len to zero.
First patch fixes this issue.
Second one (a separate one to help future bisections) adds
more sanity check to SKB_GSO_DODGY users.
====================
Link: https://patch.msgid.link/20240924150257.1059524-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
One path takes care of SKB_GSO_DODGY, assuming
skb->len is bigger than hdr_len.
virtio_net_hdr_to_skb() does not fully dissect TCP headers,
it only make sure it is at least 20 bytes.
It is possible for an user to provide a malicious 'GSO' packet,
total length of 80 bytes.
- 20 bytes of IPv4 header
- 60 bytes TCP header
- a small gso_size like 8
virtio_net_hdr_to_skb() would declare this packet as a normal
GSO packet, because it would see 40 bytes of payload,
bigger than gso_size.
We need to make detect this case to not underflow
qdisc_skb_cb(skb)->pkt_len.
Fixes: 1def9238d4 ("net_sched: more precise pkt_len computation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The number of register fields cannot be assumed to be ALE_FIELDS_MAX
as some platforms can have lesser fields.
Solve this by embedding the actual number of fields available
in platform data and use that instead of ALE_FIELDS_MAX.
Gets rid of the below warning on BeagleBone Black
[ 1.007735] WARNING: CPU: 0 PID: 33 at drivers/base/regmap/regmap.c:1208 regmap_field_init+0x88/0x9c
[ 1.007802] invalid empty mask defined
[ 1.007812] Modules linked in:
[ 1.007842] CPU: 0 UID: 0 PID: 33 Comm: kworker/u4:3 Not tainted 6.11.0-01459-g508403ab7b74-dirty #840
[ 1.007867] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.007890] Workqueue: events_unbound deferred_probe_work_func
[ 1.007935] Call trace:
[ 1.007957] unwind_backtrace from show_stack+0x10/0x14
[ 1.007999] show_stack from dump_stack_lvl+0x50/0x64
[ 1.008033] dump_stack_lvl from __warn+0x70/0x124
[ 1.008077] __warn from warn_slowpath_fmt+0x194/0x1a8
[ 1.008113] warn_slowpath_fmt from regmap_field_init+0x88/0x9c
[ 1.008154] regmap_field_init from devm_regmap_field_alloc+0x48/0x64
[ 1.008193] devm_regmap_field_alloc from cpsw_ale_create+0xfc/0x320
[ 1.008251] cpsw_ale_create from cpsw_init_common+0x214/0x354
[ 1.008286] cpsw_init_common from cpsw_probe+0x4ac/0xb88
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/CAMuHMdUf-tKRDzkz2_m8qdFTFutefddU0NTratVrEjRTzA3yQQ@mail.gmail.com/
Fixes: 11cbcfeaa7 ("net: ethernet: ti: cpsw_ale: use regfields for number of Entries and Policers")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240924-am65-cpsw-multi-rx-fix-v1-1-0ca3fa9a1398@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
