ENGINE API has been deprecated since OpenSSL version 3.0 [1].
Distros have started dropping support from headers and in future
it will likely disappear also from library.
It has been superseded by the PROVIDER API, so use it instead
for OPENSSL MAJOR >= 3.
[1] https://github.com/openssl/openssl/blob/master/README-ENGINES.md
[jarkko: fixed up alignment issues reported by checkpatch.pl --strict]
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
ERR_get_error_line() is deprecated since OpenSSL 3.0.
Use ERR_peek_error_line() instead, and combine display_openssl_errors()
and drain_openssl_errors() to a single function where parameter decides
if it should consume errors silently.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Couple error handling helpers are repeated in both tools, so
move them to a common header.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2}
arguments, the kernel will first emit WARN but then have an oops
because id_2 gets dereferenced anyway.
Add the missing id_2 check and move WARN_ON() to the final else branch
to avoid duplicate NULL checks.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Cc: stable@vger.kernel.org # v5.17+
Fixes: 7d30198ee2 ("keys: X.509 public key issuer lookup without AKID")
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
These declarations are never implemented, remove it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Physical addresses under IOVA on x86 platform are mapped contiguously
as a side effect before the patch that removed CONFIG_DMA_REMAP. The
NTB rx buffer ring is a single chunk DMA buffer that is allocated
against the NTB PCI device. If the receive side is using a DMA device,
then the buffers are remapped against the DMA device before being
submitted via the dmaengine API. This scheme becomes a problem when
the physical memory is discontiguous. When dma_map_page() is called
on the kernel virtual address from the dma_alloc_coherent() call, the
new IOVA mapping no longer points to all the physical memory allocated
due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs()
in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best
fix for the circumstance. A potential future solution may be having the DMA
mapping API providing a way to alias an existing IOVA mapping to a new
device perhaps.
This fix is not to fix the patch pointed to by the fixes tag, but to fix
the issue arised in the ntb_transport driver on x86 platforms after the
said patch is applied.
Reported-by: Jerry Dai <jerry.dai@intel.com>
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev
function, then &sndev->check_link_status_work is bound with
check_link_status_work. switchtec_ntb_link_notification may be called
to start the work.
If we remove the module which will call switchtec_ntb_remove to make
cleanup, it will free sndev through kfree(sndev), while the work
mentioned above will be used. The sequence of operations that may lead
to a UAF bug is as follows:
CPU0 CPU1
| check_link_status_work
switchtec_ntb_remove |
kfree(sndev); |
| if (sndev->link_force_down)
| // use sndev
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in switchtec_ntb_remove.
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The word 'swtich' is wrong, so fix it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Use "/*" instead of "/**" for common C comments to prevent warnings
from scripts/kernel-doc.
ntb_hw_epf.c:15: warning: expecting prototype for Host side endpoint driver to implement Non(). Prototype was for NTB_EPF_COMMAND() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fix all kernel-doc warnings in ntb_transport.c.
The function parameters for ntb_transport_create_queue() changed, so
update them in the kernel-doc comments.
Add a Returns: comment for ntb_transport_register_client_dev().
ntb_transport.c:382: warning: No description found for return value of 'ntb_transport_register_client_dev'
ntb_transport.c:1984: warning: Excess function parameter 'rx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'tx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'event_handler' description in 'ntb_transport_create_queue'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
'struct bus_type' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
69682 4593 152 74427 122bb drivers/ntb/ntb_transport.o
5847 448 32 6327 18b7 drivers/ntb/core.o
After:
=====
text data bss dec hex filename
69858 4433 152 74443 122cb drivers/ntb/ntb_transport.o
6007 288 32 6327 18b7 drivers/ntb/core.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a0605612 ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
On RISCV64 Qemu machine with 512MB memory, cmdline "crashkernel=500M,high"
will cause system stall as below:
Zone ranges:
DMA32 [mem 0x0000000080000000-0x000000009fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x000000008005ffff]
node 0: [mem 0x0000000080060000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
(stall here)
commit 5d99cadf1568 ("crash: fix x86_32 crash memory reserve dead loop
bug") fix this on 32-bit architecture. However, the problem is not
completely solved. If `CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX` on 64-bit
architecture, for example, when system memory is equal to
CRASH_ADDR_LOW_MAX on RISCV64, the following infinite loop will also occur:
-> reserve_crashkernel_generic() and high is true
-> alloc at [CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX] fail
-> alloc at [0, CRASH_ADDR_LOW_MAX] fail and repeatedly
(because CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX).
As Catalin suggested, do not remove the ",high" reservation fallback to
",low" logic which will change arm64's kdump behavior, but fix it by
skipping the above situation similar to commit d2f32f23190b ("crash: fix
x86_32 crash memory reserve dead loop").
After this patch, it print:
cannot allocate crashkernel (size:0x1f400000)
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20240812062017.2674441-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SBI v2.0 specification pointed to by the link below reserves the
event code 0xffff for platform specific firmware events. Update the driver
to be able to parse and program such events. The platform specific
firmware events must now be specified in the perf command as below:
perf stat -e rCxxx ...
where bits[63:62] = 0x3 of the event config indicate a platform specific
firmware event and xxx indicate the actual event code which is passed
as the event data.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf
Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Charlie Jenkins <charlie@rivosinc.com> says:
Add support for riscv specific barrier implementations to the tools
tree, so that fence instructions can be emitted for synchronization.
* b4-shazam-merge:
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-0-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Change my contact email in MAINTAINERS and .mailmap to my kernel.org.
This in order to avoid cumbersome corporate email policies.
Signed-off-by: Joel Granados <j.granados@samsung.com>
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop.
Link: https://lore.kernel.org/io-uring/66ed061d.050a0220.29194.0053.GAE@google.com/
Reported-by: syzbot+5fca234bd7eb378ff78e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the other architectures use their custom barrier implementations.
Use the barrier code from the kernel sources to optimize barriers in
tools.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-1-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I recently ended up with a warning on some compilers along the lines of
CC kernel/resource.o
In file included from include/linux/ioport.h:16,
from kernel/resource.c:15:
kernel/resource.c: In function 'gfr_start':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1829:23: note: in expansion of macro 'min_t'
1829 | end = min_t(resource_size_t, base->end,
| ^~~~~
kernel/resource.c: In function 'gfr_continue':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1847:24: note: in expansion of macro 'min_t'
1847 | addr <= min_t(resource_size_t, base->end,
| ^~~~~
cc1: all warnings being treated as errors
which looks like a real problem: our phys_addr_t is only 32 bits now, so
having 34-bit masks is just going to result in overflows.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731162159.9235-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform)
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Right now any link trace is listed as being linked after the head
request in the chain, but it's more useful to note explicitly which
request a given new request is chained to. Change the link trace to dump
the tail request so that chains are immediately apparent when looking at
traces.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After twenty years of development we finally reached the point to enable
PREEMPT_RT support in the mainline kernel.
All prerequisites are merged, so enable it on the supported architectures
ARM64, RISCV and X86(32/64-bit).
-----BEGIN PGP SIGNATURE-----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=+vJ6
-----END PGP SIGNATURE-----
Merge tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT enablement from Thomas Gleixner:
"Enable PREEMPT_RT on supported architectures:
After twenty years of development we finally reached the point to
enable PREEMPT_RT support in the mainline kernel.
All prerequisites are merged, so enable it on the supported
architectures ARM64, RISCV and X86(32/64-bit)"
* tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
riscv: Allow to enable PREEMPT_RT.
arm64: Allow to enable PREEMPT_RT.
x86: Allow to enable PREEMPT_RT.
The append operation was introduced in
commit b1a1a1a09b ("kbuild: lto: postpone objtool")
when the command was created from two parts.
In commit 850ded46c6 ("kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG")
however the first part was removed again, making the append operation
unnecessary.
To keep this command definition aligned with all other command
definitions, remove the append again.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, every expression in Kconfig files produces a new abstract
syntax tree (AST), even if it is identical to a previously encountered
one.
Consider the following code:
config FOO
bool "FOO"
depends on (A || B) && C
config BAR
bool "BAR"
depends on (A || B) && C
config BAZ
bool "BAZ"
depends on A || B
The "depends on" lines are similar, but currently a separate AST is
allocated for each one.
The current data structure looks like this:
FOO->dep ==> AND BAR->dep ==> AND BAZ->dep ==> OR
/ \ / \ / \
OR C OR C A B
/ \ / \
A B A B
This is redundant; FOO->dep and BAR->dep have identical ASTs but
different memory instances.
We can optimize this; FOO->dep and BAR->dep can share the same AST, and
BAZ->dep can reference its sub tree.
The optimized data structure looks like this:
FOO->dep, BAR->dep ==> AND
/ \
BAZ->dep ==> OR C
/ \
A B
This commit introduces a hash table to keep track of allocated
expressions. If an identical expression is found, it is reused.
This does not necessarily result in memory savings, as menu_finalize()
transforms expressions without freeing up stale ones. This will be
addressed later.
One optimization that can be easily implemented is caching the
expression's value. Once FOO's dependency, (A || B) && C, is calculated,
it can be cached, eliminating the need to recalculate it for BAR.
This commit also reverts commit e983b7b17a ("kconfig/menu.c: fix
multiple references to expressions in menu_add_prop()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, expr_eliminate_dups() passes two identical pointers down to
expr_eliminate_dups1(), which later skips processing identical leaves.
This approach is somewhat tricky and, more importantly, it will not work
with the refactoring made in the next commit.
This commit slightly changes the recursion logic; it deduplicates both
the left and right arms, and then passes them to expr_eliminate_dups1().
expr_eliminate_dups() should produce the same result.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function was originally added by commit 8af27e1dc4 ("fixdep: use
hash table instead of a single array").
Move it to scripts/include/ so that other host programs can use it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit 64e166099b ("kallsyms: get rid of code for absolute,
kallsyms"), there is only one call site for output_address(). Squash it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_BUILTIN_MODULE_RANGES is enabled, the modules.builtin.ranges
file should be installed in the module install location.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modules.builtin.ranges offset range data for builtin modules is
generated at compile time based on the list of built-in modules and
the vmlinux.map and vmlinux.o.map linker maps. This data can be used
to determine whether a symbol at a particular address belongs to
module code that was configured to be compiled into the kernel proper
as a built-in module (rather than as a standalone module).
This patch adds a script that uses the generated modules.builtin.ranges
data to annotate the symbols in the System.map with module names if
their address falls within a range that belongs to one or more built-in
modules.
It then processes the vmlinux.map (and if needed, vmlinux.o.map) to
verify the annotation:
- For each top-level section:
- For each object in the section:
- Determine whether the object is part of a built-in module
(using modules.builtin and the .*.cmd file used to compile
the object as suggested in [0])
- For each symbol in that object, verify that the built-in
module association (or lack thereof) matches the annotation
given to the symbol.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Unfortunately when we migrated the lifecycle management of the key LSM
blob to the LSM framework we forgot to convert the security_watch_key()
callbacks for SELinux and Smack. This patch corrects this by making use
of the selinux_key() and smack_key() helper functions respectively.
This patch also removes some input checking in the Smack callback as it
is no longer needed.
Fixes: 5f8d28f6d7 ("lsm: infrastructure management of the key security blob")
Reported-by: syzbot+044fdf24e96093584232@syzkaller.appspotmail.com
Tested-by: syzbot+044fdf24e96093584232@syzkaller.appspotmail.com
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but
does provide ACS-like features (Subramanian Ananthanarayanan)
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
* pci/quirks:
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
PCI: Add ACS quirk for Qualcomm SA8775P
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to
be lost or delivered as the wrong interrupt (Sean Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding
and xilinx-dma-pl driver (Thippeswamy Havalige)
* pci/controller/xilinx:
PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge
arm64: zynqmp: Add PCIe phys property for ZCU102
PCI: xilinx-nwl: Add PHY support
dt-bindings: pci: xilinx-nwl: Add phys property
PCI: xilinx-nwl: Clean up clock on probe failure/removal
PCI: xilinx-nwl: Rate-limit misc interrupt messages
PCI: xilinx-nwl: Fix register misspelling
PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a flood
(Manivannan Sadhasivam)
- Add Manivannan Sadhasivam as maintainer of qcom endpoint driver
(Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint
controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding (Manivannan
Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR
MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is deasserted to
partially avoid the problem that the endpoint SoC crashes when accessing
things when Refclk is absent (Manivannan Sadhasivam)
- Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan
Sadhasivam)
- Cache maximum link speed value in dw_pcie.max_link_speed for use by
vendor drivers (Manivannan Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu
Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a
NULL pointer dereference (Manivannan Sadhasivam)
* pci/controller/qcom:
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region
PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt
dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt
PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names
PCI: endpoint: Assign PCI domain number for endpoint controllers
dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property
dt-bindings: PCI: pci-ep: Update Maintainers
PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event
PCI: qcom-ep: Drop the redundant masking of global IRQ events
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
* pci/controller/loongson:
PCI/ACPI: Increase Loongson max PCI hosts to 8
