Commit Graph

2477 Commits

Author SHA1 Message Date
Linus Walleij
8b866b0682 gpio: tc3589x: implement open drain/source callback
This makes use of the new .set_single_ended() callback to
set the GPIO line as open drain/open source using hardware.
The TC3589x can do this by either disabling the N-MOS
transistor (open drain) or the P-MOS transistor (open source)
of the output driver stage, in the first case making the signal
drive actively low and high impedance as "high" and in the second
case actively high and high impedance, which is as close to native
open drain support as we come.

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-05 17:02:34 +02:00
Linus Walleij
cee1b40d96 gpio: tc3589x: use BIT() macro
This switch to use BIT(n) instead of (1 << n) which is less
to the point. Most GPIO drivers do this to avoid mistakes.
Also switch from using <linux/gpio.h> to the apropriate
<linux/gpio/driver.h> include.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-05 16:58:38 +02:00
Linus Walleij
c663e5f567 gpio: support native single-ended hardware drivers
Some GPIO controllers has a special hardware bit we can flip
to support open drain / source. This means that on these hardwares
we do not need to emulate OD/OS by setting the line to input
instead of actively driving it high/low. Add an optional vtable
callback to the driver set_single_ended() so that driver can
implement this in hardware if they have it.

We may need a pinctrl_gpio_set_config() call at some point to
propagate this down to a backing pin control device on systems
with split GPIO/pin control.

Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-05 16:57:15 +02:00
Axel Lin
6e66a6599a gpio: tpic2810: Make sure cached buffer has consistent status with h/w status
i2c_smbus_write_byte_data() can fail. To ensure the
cached buffer has consistent status with h/w status, don't
update the cached gpio->buffer if write fails.

Also refactor the code a bit by adding a tpic2810_set_mask_bits()
helper and use it to simplify the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:14:37 +02:00
Paul Gortmaker
18fb0a981e gpio: zx: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

config GPIO_ZX
        bool "ZTE ZX GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:10:25 +02:00
Paul Gortmaker
b33d12d3d7 gpio: xgene: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_XGENE
drivers/gpio/Kconfig:   bool "APM X-Gene GPIO controller support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Feng Kan <fkan@apm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:09:16 +02:00
Paul Gortmaker
3c90c6d60b gpio: sta2x11: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_STA2X11
drivers/gpio/Kconfig:   bool "STA2x11/ConneXt GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity, so that when reading
the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:07:40 +02:00
Paul Gortmaker
ef3e7100e0 gpio: pl061: make explicitly non-modular
The Kconfig for this driver is currently:

config GPIO_PL061
        bool "PrimeCell PL061 GPIO support"

...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:07:03 +02:00
Paul Gortmaker
ed329f3a64 gpio: mvebu: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MVEBU
drivers/gpio/Kconfig:   def_bool y

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:05:44 +02:00
Paul Gortmaker
4bb9f7251c gpio: moxart: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MOXART
drivers/gpio/Kconfig:   bool "MOXART GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular references so that when reading
the driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:03:13 +02:00
Paul Gortmaker
0de6a80de1 gpio: mc9s08dz60: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MC9S08DZ60
drivers/gpio/Kconfig:   bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_i2c_driver() uses the same init level priority as
builtin_i2c_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Wu Guoxing <b39297@freescale.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:02:09 +02:00
Paul Gortmaker
d5610e514e gpio: mb86s7x: make explicitly non-modular
The Kconfig for this driver is currently:

config GPIO_MB86S7X
        bool "GPIO support for Fujitsu MB86S7x Platforms"

...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 15:00:28 +02:00
Paul Gortmaker
8f3e19fae0 gpio: bcm-kona: make explicitly non-modular
The Kconfig currently controlling compilation of this code is:

config GPIO_BCM_KONA
        bool "Broadcom Kona GPIO"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: Ray Jui <rjui@broadcom.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 12:01:15 +02:00
Martin Blumenstingl
8fccdb580e gpio: gpio-it87: Add support for IT8620 and IT8628
These chips seem to have a 9th GPIO block (thus supporting 72 GPIOs)
which is configured through SuperIO register 0xd2 (output enable) and
0xd3 (simple I/O). This is also the reason why io_size is larger than
on IT8728 / IT8732. Unfortunately I don't have hardware to test this 9th
GPIO block.

I am also not sure about not configuring the Simple I/O registers as the
hardware I have only uses GPIO block 8. Reading back the values of
0xc0-0xc7 (as configured by the BIOS/EFI on my board) shows that all
have 0xff set.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 11:59:43 +02:00
Kamlakant Patel
dd98756d78 gpio: xlp: Add GPIO driver support for Broadcom Vulcan ARM64
- Add GPIO support for Broadcom Vulcan ARM64.
- Add depends on ARCH_VULCAN to Kconfig to enable gpio controller
  driver for Broadcom Vulcan ARM64 SoCs.

Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 10:44:08 +02:00
Alexander Stein
16fe1ad289 gpio: mcp23s08: Add support for level triggered interrupts
The interrupt for the corresponding pin is configured to trigger when the
pin state changes compared to a preconfigured state (Bit set in INTCON).
This state is set by setting/clearing the bit in DEFVAL.
In the interrupt handler we need also to check if the bit in INTCON is set
for level triggered interrupts.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 10:41:50 +02:00
Nicolas Saenz Julienne
80018bd9cb gpio: 74x164: add dt support for nxp's 74x594
The chip is also an 8 bit shift register which works out of the box as a GPO
expander with this patch

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 10:25:51 +02:00
Axel Lin
c6cc75fec0 gpio: xgene-sb: Use irq_domain_free_irqs_common()
Current code calls irq_domain_alloc_irqs_parent() in .alloc,
so it should call irq_domain_free_irqs_parent() accordingly in .free.
Fix it by switching to use irq_domain_free_irqs_common() instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31 10:22:53 +02:00
YD Tseng
ca27379f5d gpio: amdpt: Add a new ACPI HID
This patch adds a new ACPI HID, AMDIF030, in the pt_gpio_acpi_match.

Signed-off-by: YD Tseng<Yd_Tseng@asmedia.com.tw>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:51 +02:00
Axel Lin
b6d055b198 gpio: octeon: Constify octeon_gpio_match table
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:51 +02:00
Axel Lin
592569de4c gpio: octeon: Convert to use devm_ioremap_resource
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:51 +02:00
Axel Lin
574b782e7b gpio: amdpt: Convert to use gpio-generic
Use gpio-generic to simplify this driver.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: YD Tseng <Yd_Tseng@asmedia.com.tw>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:51 +02:00
Linus Walleij
f7aed67d63 gpio: mcp23s08: delete req/rel_resource callbacks
When using the GPIOLIB_IRQCHIP the gpiolib provides a
straight-forward implementation of request/release resources,
rely on that instead.

Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Phil Reid
dad3d27295 gpio: mcp23s08: switch to use gpiolib irqchip helpers
This switches the mcp23s08 driver to use the gpiolib irqchip
helpers.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Geert Uytterhoeven
d46ab68239 gpio: 74x164: Implement gpiochip.set_multiple()
This allows to set multiple outputs using a single SPI transfer.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Geert Uytterhoeven
dbb763b8ea gpio: rcar: Implement gpiochip.set_multiple()
This allows to set multiple outputs using a single register write.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Axel Lin
f85834229b gpio: mb86s7x: Remove redundant platform_set_drvdata() call
Set it once is enough, so remove the second platform_set_drvdata() call.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Axel Lin
86d3f36768 gpio: menz127: Drop *mdev field from struct men_z127_gpio
No need to store *medv in struct men_z127_gpio.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:38:50 +02:00
Linus Torvalds
12e7b0a627 - New Drivers
- Freescale Touch Screen ADC
    - X-Powers AXP PMIC with RSB
    - TI TPS65086 Power Management IC (PMIC)
  - New Device Support
    - Supply device PCI IDs for Intel Broxton
  - Fix-ups
    - Move to clkdev_create() API; intel_quark_i2c_gpio
    - Complete re-write of TI's TPS65912 Power Management IC (PMIC)
    - Remove unnecessary function argument; axp20x
    - Separate out bus related code; axp20x
    - Coding Style changes; axp20x
    - Allow more drivers to be compiled as modules
    - Work around false positive 'used uninitialised' warning; db8500-prcmu
  - Bug Fixes
    - Remove do_div(); fsl-imx25-gcq
    - Fix driver init when built-in; tps65010
    - Fix clock-unregister leak; intel-lpss
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6+LJAAoJEFGvii+H/Hdh8kQP/2AKYzPZiw9fhLufsDPvXO5m
 BVdLYVyA11oQjQk7/Bh+5Rjz8mR5Tfv4uAJUReC3FOIfC/oJNBfBxYJLDV/P8S0/
 KaCEaZrpNmecKrsy+TjmFYtcRa51THAdjlWEUKRks/ZBjwP4YsNnh5reWe+wB7bS
 NFbCNhpXFvYXaDGH8MRhKqdChzZkxi+lgOBcFCKvUYO5/o6g/ZRUD/0TXUItJDwh
 F8ps5jImHC1imHeRIKWPNrrZqcYasKmObIhvOKMDcwNQPnjrAWq5QuFH4LFhGQ7d
 7NMQrBpaGvZyUNBVtL7ZF1xCJ68wAg/ZvZUkKVkax9ubLbSgf6VXYLQEbq+lyFn7
 H9A79xPAGN2nC9HsGnCqW0c0qgTOz0DIkbpuaxAGlzBt0zooc19i3cuUd7LX0NG8
 ttLaIP1hX6rgvXSFnF0Ihe3iN5A90LTT3ldbn3A8awyS42vEAbUVL9ivRL21BUbB
 ilSTO2W05a9HlIVe43o2euytaGvDYX7RbL/g3WcJLF1pA01RCIDQAI5usMpgF3bf
 fJ7cszll0OVTTb5UzbfrNsxAn4oNtbwMIspMMFe17pbmxqh+4oomM3CkuTrMVQfB
 pA7Uv0jh/mLCV6P52ZEsNiecn0/l0rID8d/DCHjunr2xBWIOrglzZ7n+vLTJMNJ6
 72GVBkYRMLbRm+eph1Tp
 =gTBA
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale Touch Screen ADC
   - X-Powers AXP PMIC with RSB
   - TI TPS65086 Power Management IC (PMIC)

  New Device Support:
   - Supply device PCI IDs for Intel Broxton

  Fix-ups:
   - Move to clkdev_create() API; intel_quark_i2c_gpio
   - Complete re-write of TI's TPS65912 Power Management IC (PMIC)
   - Remove unnecessary function argument; axp20x
   - Separate out bus related code; axp20x
   - Coding Style changes; axp20x
   - Allow more drivers to be compiled as modules
   - Work around false positive 'used uninitialised' warning; db8500-prcmu

  Bug Fixes:
   - Remove do_div(); fsl-imx25-gcq
   - Fix driver init when built-in; tps65010
   - Fix clock-unregister leak; intel-lpss"

* tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: intel-lpss: Pass I2C configuration via properties on BXT
  mfd: imx6sx: Add PCIe register definitions for iomuxc gpr
  mfd: ipaq-micro: Use __maybe_unused to hide pm functions
  mfd: max77686: Add max77802 to I2C device ID table
  mfd: max77686: Export OF module alias information
  mfd: max77686: Allow driver to be built as a module
  mfd: stmpe: Add the proper PWM resources
  mfd: tps65090: Set regmap config reg counts properly
  mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled
  mfd: as3711: Set regmap config reg counts properly
  mfd: rc5t583: Set regmap config reg counts properly
  gpio: tps65086: Add GPO driver for the TPS65086 PMIC
  mfd: mt6397: Add platform device ID table
  mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists
  mfd: mt6397: Add MT6323 support to MT6397 driver
  mfd: mt6397: Add support for different Slave types
  mfd: mt6397: int_con and int_status may vary in location
  dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC
  mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists
  mfd: Add documentation for ACT8945A DT bindings
  ...
2016-03-18 10:15:11 -07:00
Phil Reid
3539699c03 gpio: mcp23s08: Fix clearing of interrupt.
The mcp23s18 is configurable on clearing the interrupt on either reading
INTCAP or GPIO. Since driver reads INTCAP in IRQ and not the GPIO reg need
to set control byte for this mode.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16 13:41:59 +01:00
Geert Uytterhoeven
1cfab8f8b3 gpiolib: Fix comment referring to gpio_*() in gpiod_*()
Fixes: 79a9becda8 ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16 13:11:11 +01:00
Geert Uytterhoeven
e0a8604f13 gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes,
which assumes a 32-bit platform, and is not correct on 64-bit platforms.
Use "sizeof(...)" instead to fix this.

Cc: stable@vger.kernel.org
Fixes: b4818afeac ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16 13:03:14 +01:00
Matthias Brugger
e5f7e31214 gpio: xgene: Fix kconfig for standby GIPO contoller
The standby GPIO controller can be used as a interrupt controller.
Select GPIOLIB_IRQCHIP when compiling this driver. Otherwise we get
a compilation error:

drivers/gpio/gpio-xgene-sb.c: In function 'xgene_gpio_sb_probe':
drivers/gpio/gpio-xgene-sb.c:312:10: error: 'struct gpio_chip'
  has no member named 'irqdomain'
  priv->gc.irqdomain = priv->irq_domain;
          ^
scripts/Makefile.build:295: recipe for target
'drivers/gpio/gpio-xgene-sb.o' failed
make[2]: *** [drivers/gpio/gpio-xgene-sb.o] Error 1

Fixes: 1013fc41 "gpio: xgene: Enable X-Gene standby GPIO as interrupt controller"
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16 13:00:29 +01:00
Andrew F. Davis
99f0fd540f gpio: tps65086: Add GPO driver for the TPS65086 PMIC
Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes. These are output only.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:33 +00:00
Linus Walleij
9d93efe35e gpio: tps65912: fix bad merge
I screwed up while merging the immutable branch for TPS65912,
so fixing it unbroken again.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andrew F. Davis <afd@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 22:02:52 +07:00
Linus Walleij
70aba44b6c Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free"
This reverts commit 3fab91ea28.
2016-03-09 22:00:27 +07:00
Grygorii Strashko
7b1e5dc86c gpio: omap: drop dev field from gpio_bank structure
GPIO chip structure already has "parent" field which is used for the
same purpose as "dev" field in gpio_bank structure - store pointer on
GPIO device.

Hence, drop duplicated "dev" field from gpio_bank structure.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 18:07:14 +07:00
Linus Walleij
0bae2f1732 Merge branch 'ib-mfd-regulator-gpio-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel 2016-03-09 17:40:37 +07:00
Axel Lin
adf32eaa05 gpio: mpc8xxx: Slightly update the code for better readability
Setting gc->direction_output to gc->direction_output looks strange.
I think this change makes the intention more clear.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 10:44:13 +07:00
Axel Lin
cd0d3f58a0 gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip
*read_reg and *write_reg can be removed because at all the places to call
them, we can just use gc->read_reg/gc->write_reg instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 10:43:09 +07:00
Axel Lin
fa4007ca06 gpio: mpc8xxx: Fixup setting gpio direction output
For devtype with specific gpio_dir_out implementation, current code is
wrong because below code sets both gc->direction_output and
mpc8xxx_gc->direction_output to the same function.

gc->direction_output = devtype->gpio_dir_out ?: gc->direction_output;
mpc8xxx_gc->direction_output = gc->direction_output;

Set mpc8xxx_gc->direction_output = gc->direction_output first to fix it.
This way mpc8xxx_gc->direction_output actually calls the standard
bgpio_dir_out() to update register.

Fixes: commit 42178e2a1e ("drivers/gpio: Switch gpio-mpc8xxx to use gpio-generic")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 10:41:23 +07:00
Phil Reid
28c5a41e4a gpio: mcp23s08: Add support for mcp23s18
This patch adds support for the mcp23s18 which is very similar to
the mcp23s17. A couple of control bits are not the same.
Notable IOCON_HAEN (s17 only) & IOCON_INTCC. Which can be ignored.

Patch changes the following:
- Add mcp23s18 types.
- Always set mirror bit if the dts defines mcp23s18. regardless of type.
  Mirror bit is ignored on 8 bit devices anyway.
- In mcp23s08_probe use chip.ngpio instead of logic based on type
  to determine number of gpio lins to increment by. This is set
  appropiately by the call to mcp23s08_probe_one.
- Add mcp23s18 to device tree documentation.
- Remove statement that irqs don't work for spi. They do.
  Tested with mcp23s18.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 09:50:37 +07:00
Andreas Werner
f436bc2726 gpio: add driver for MEN 16Z127 GPIO controller
The 16Z127 is a 32bit GPIO controller on a MCB FPGA.
Every single line can be configured as input and output.

Push pull and open drain are supported as well as setting
a debounce value for the input lines.

Signed-off-by: Andreas Werner <andy@wernerandy.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 09:44:52 +07:00
Axel Lin
3fab91ea28 gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free
The implementation of lp3943_gpio_request/lp3943_gpio_free test pin_used
for tracing the pin usage. However, gpiolib already checks FLAG_REQUESTED
flag for the same purpose. So remove the redundant implementation.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-09 09:17:55 +07:00
Amitoj Kaur Chawla
fa283db76f gpio: timberdale: Switch to devm_ioremap_resource()
Replace calls to devm_request_mem_region and devm_ioremap with a
direct call to devm_ioremap_resource instead and modify error
handling.

Move the call to platform_get_resource adjacent to the call to
devm_ioremap_resource to make the connection between them more
clear.

A simplified version of the Coccinelle semantic patch that is used to
make this change is as follows:
//<smpl>
@nm@
expression myname;
identifier i;
@@

struct platform_driver i = { .driver = { .name = myname } };

@@
expression dev,res,size,e1,e;
expression nm.myname;
@@

-if (!devm_request_mem_region(dev, res->start, size,
-                              \(res->name\|dev_name(dev)\|myname\)))
                               {
-   ...
-   return ...;
-}
... when != res->start = e1
e =
-devm_ioremap(dev,res->start,size);
+devm_ioremap_resource(dev,res);

if
-(e == NULL)
+(IS_ERR(e))
{
 ...
-return ...;
+return PTR_ERR(e);
}
//</smpl>

Further, updated error handling by hand as devm_ioremap_resource
gives appropriate error messages, so remove unnecessary error
messages.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08 15:56:33 +07:00
Julien Grossholtz
6dcfd7291b gpio: ts4800: Add IMX51 dependency
The TS-4800 is an i.MX515 board. Its GPIO driver should only be compiled
for this CPU or for test builds.

Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-08 15:28:08 +07:00
Linus Walleij
016bf20829 Merge branch 'devm-gpiochip-add-data' into devel 2016-03-08 14:41:41 +07:00
Bamvor Jian Zhang
a961f9b472 gpiolib: rewrite gpiodev_add_to_list
The original code of gpiodev_add_to_list is not very clear which
lead to bugs or compiling warning, reference the following patches:
Bugs:
1.  Commit ef7c755303 ("gpiolib: improve overlap check of range of
    gpio").
2.  Commit 96098df125 ("gpiolib: fix chip order in gpio list")

Warning:
1.  Commit e28ecca6ea ("gpio: fix warning about iterator").
of gpio").

There is a off-list discussion about how to improve it consequently.
This commit try to follow this by rewriting the whole functions.

Tested pass with my gpio mockup driver and test scripts[1].

[1] http://www.spinics.net/lists/linux-gpio/msg09598.html

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 12:02:46 +07:00
Axel Lin
24030d9d95 gpio: moxart: Allow compile test build
There is no build dependency for this driver, so enable COMPILE_TEST to get
better build coverage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 11:38:34 +07:00
Axel Lin
0c271658aa gpio: moxart: Drop redundant code to set already initialized gpio_chip fields
These fields are initialized by bgpio_init() with exactly the same settings
so remove the redundant code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-07 11:37:11 +07:00