Add non_owner variant of start_freeze/unfreeze queue APIs, so that the
caller knows that what they are doing, and we can skip lockdep support
for non_owner variant in per-call level.
Prepare for supporting lockdep for freezing/unfreezing queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a6088845c2 ("block: kyber: make kyber more friendly with merging")
removed the only blk_mq_flush_busy_ctxs() call from outside the block layer
core. Hence unexport blk_mq_flush_busy_ctxs().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20241023202850.3469279-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that the tag_list_lock mutex is not held any longer than
necessary. This change reduces latency if e.g. blk_mq_quiesce_tagset()
is called concurrently from more than one thread. This function is used
by the NVMe core and also by the UFS driver.
Reported-by: Peter Wang <peter.wang@mediatek.com>
Cc: Chao Leng <lengchao@huawei.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 414dd48e88 ("blk-mq: add tagset quiesce interface")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20241022181617.2716173-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The memory barriers in list_del_init_careful() and list_empty_careful()
in pairs already handle the proper ordering between data.got_token
and data.wq.entry. So remove the redundant explicit barriers. And also
change a "break" statement to "return" to avoid redundant calling of
finish_wait().
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/20241021085251.73353-1-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in block/fs prep patches for the atomic write support.
* for-6.13/block-atomic:
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
When a process migrates to another cgroup and the original cgroup is deleted,
the restrictions of throttled bios cannot be removed. If the restrictions
are set too low, it will take a long time to complete these bios.
Refer to the process of deleting a disk to remove the restrictions and
issue bios when deleting the cgroup.
This makes difference on the behavior of throttled bios:
Before: the limit of the throttled bios can't be changed and the bios will
complete under this limit;
Now: the limit will be canceled and the throttled bios will be flushed
immediately.
References:
[1] https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
[2] https://lore.kernel.org/all/da861d63-58c6-3ca0-2535-9089993e9e28@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240817071108.1919729-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Supposing first scenario with a virtio_blk driver.
CPU0 CPU1
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_request_bypass_insert() 1) store
blk_mq_start_stopped_hw_queue()
clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending())
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
return
__blk_mq_sched_dispatch_requests()
Supposing another scenario.
CPU0 CPU1
blk_mq_requeue_work()
blk_mq_insert_request() 1) store
virtblk_done()
blk_mq_start_stopped_hw_queue()
blk_mq_run_hw_queues() clear_bit(BLK_MQ_S_STOPPED) 3) store
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_sched_dispatch_requests()
if (blk_mq_hctx_stopped()) 2) load
continue
blk_mq_run_hw_queue()
Both scenarios are similar, the full memory barrier should be inserted
between 1) and 2), as well as between 3) and 4) to make sure that either
CPU0 sees BLK_MQ_S_STOPPED is cleared or CPU1 sees dispatch list.
Otherwise, either CPU will not rerun the hardware queue causing
starvation of the request.
The easy way to fix it is to add the essential full memory barrier into
helper of blk_mq_hctx_stopped(). In order to not affect the fast path
(hardware queue is not stopped most of the time), we only insert the
barrier into the slow path. Actually, only slow path needs to care about
missing of dispatching the request to the low-level device driver.
Fixes: 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-4-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Supposing the following scenario.
CPU0 CPU1
blk_mq_insert_request() 1) store
blk_mq_unquiesce_queue()
blk_queue_flag_clear() 3) store
blk_mq_run_hw_queues()
blk_mq_run_hw_queue()
if (!blk_mq_hctx_has_pending()) 4) load
return
blk_mq_run_hw_queue()
if (blk_queue_quiesced()) 2) load
return
blk_mq_sched_dispatch_requests()
The full memory barrier should be inserted between 1) and 2), as well as
between 3) and 4) to make sure that either CPU0 sees QUEUE_FLAG_QUIESCED
is cleared or CPU1 sees dispatch list or setting of bitmap of software
queue. Otherwise, either CPU will not rerun the hardware queue causing
starvation.
So the first solution is to 1) add a pair of memory barrier to fix the
problem, another solution is to 2) use hctx->queue->queue_lock to
synchronize QUEUE_FLAG_QUIESCED. Here, we chose 2) to fix it since
memory barrier is not easy to be maintained.
Fixes: f4560ffe8c ("blk-mq: use QUEUE_FLAG_QUIESCED to quiesce queue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-3-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Supposing the following scenario with a virtio_blk driver.
CPU0 CPU1 CPU2
blk_mq_try_issue_directly()
__blk_mq_issue_directly()
q->mq_ops->queue_rq()
virtio_queue_rq()
blk_mq_stop_hw_queue()
virtblk_done()
blk_mq_try_issue_directly()
if (blk_mq_hctx_stopped())
blk_mq_request_bypass_insert() blk_mq_run_hw_queue()
blk_mq_run_hw_queue() blk_mq_run_hw_queue()
blk_mq_insert_request()
return
After CPU0 has marked the queue as stopped, CPU1 will see the queue is
stopped. But before CPU1 puts the request on the dispatch list, CPU2
receives the interrupt of completion of request, so it will run the
hardware queue and marks the queue as non-stopped. Meanwhile, CPU1 also
runs the same hardware queue. After both CPU1 and CPU2 complete
blk_mq_run_hw_queue(), CPU1 just puts the request to the same hardware
queue and returns. It misses dispatching a request. Fix it by running
the hardware queue explicitly. And blk_mq_request_issue_directly()
should handle a similar situation. Fix it as well.
Fixes: d964f04a8f ("blk-mq: fix direct issue")
Cc: stable@vger.kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241014092934.53630-2-songmuchun@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 5b7048b897.
The main purpose of this patch is cleanup.
The throtl_adjusted_limit function was removed after
commit bf20ab538c ("blk-throttle: remove
CONFIG_BLK_DEV_THROTTLING_LOW"), so the problem of not being
able to scale after setting bps or iops to 1 will not occur.
So revert this commit that bps/iops can be set to 1.
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241016024508.3340330-1-xiuhong.wang@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since SLOB was removed and since
commit 6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20241013201704.49576-10-Julia.Lawall@inria.fr
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After a SED drive is provisioned, there is no way to change the SID
password via the ioctl() interface. A new ioctl IOC_OPAL_SET_SID_PW
will allow the password to be changed. The valid current password is
required.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20240829175639.6478-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Applications using the passthrough interfaces for IO want to continue
seeing the disk stats. These requests had been fenced off from this
block layer feature. While the block layer doesn't necessarily know what
a passthrough command does, we do know the data size and direction,
which is enough to account for the command's stats.
Since tracking these has the potential to produce unexpected results,
the passthrough stats are locked behind a new queue flag that needs to
be enabled with the /sys/block/<dev>/queue/iostats_passthrough
attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241007153236.2818562-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Requesting a module either succeeds or does nothing, return an error from
this method does not make sense.
Also move the load_module after the store method in the struct
declaration to keep the important show and store methods together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20241008050841.104602-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both most common formats have uuid in addition to partition name:
GPT: standard uuid xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
DOS: 4 byte disk signature and 1 byte partition xxxxxxxx-xx
Tools from util-linux use the same notation for them.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
[dianders: rebased to modern kernels]
Signed-off-by: Douglas Anderson <dianders@google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241004171340.v2.1.I938c91d10e454e841fdf5d64499a8ae8514dc004@changeid
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's known needed at that point, and it's cleaner to just assign it
there rather than rely on it being reliably set before hitting the
IO accounting. Hence, move it out of blk_mq_rq_time_init(), which is
now only doing the allocation side timing.
While at it, get rid of the '0' time passing to blk_mq_rq_time_init(),
just pass in blk_time_get_ns() for the two cases where 0 is being
explicitly passed in. The rest pass in the previously cached allocation
time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit moved RQF_IO_STAT into blk_account_io_done(), where
it's being set rather than at allocation time. Unfortunately we do check
for that flag in blk_mq_rq_time_init(), and hence setting the
start_time_ns wasn't being done. This lead to unwieldy inflight IO counts
and times, as IO completion accounting would a 0 value rather than the
issue time for it's subtraction math.
Fix this by switching the blk_mq_rq_time_init() check to use the queue
state rather than the request state.
Fixes: b8f762400ae8 ("block: move iostat check into blk_acount_io_start()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410062110.512391df-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for partition table defined in Device Tree. Similar to how
it's done with MTD, add support for defining a fixed partition table in
device tree.
A common scenario for this is fixed block (eMMC) embedded devices that
have no MBR or GPT partition table to save storage space. Bootloader
access the block device with absolute address of data.
This is to complete the functionality with an equivalent implementation
with providing partition table with bootargs, for case where the booargs
can't be modified and tweaking the Device Tree is the only solution to
have an usabe partition table.
The implementation follow the fixed-partitions parser used on MTD
devices where a "partitions" node is expected to be declared with
"fixed-partitions" compatible in the OF node of the disk device
(mmc-card for eMMC for example) and each child node declare a label
and a reg with offset and size. If label is not declared, the node name
is used as fallback. Eventually is also possible to declare the read-only
property to flag the partition as read-only.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-6-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce add_disk_fwnode() as a replacement of device_add_disk() that
permits to pass and attach a fwnode to disk dev.
This variant can be useful for eMMC that might have the partition table
for the disk defined in DT. A parser can later make use of the attached
fwnode to parse the related table and init the hardcoded partition for
the disk.
device_add_disk() is converted to a simple wrapper of add_disk_fwnode()
with the fwnode entry set as NULL.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-4-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for defining read-only partitions and complete support for
it in the cmdline partition parser as the additional "ro" after a
partition is scanned but never actually applied.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241002221306.4403-2-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now just checking whether or not RQF_IO_STAT is set, so let's get
rid of it and just open-code the specific flag that is being checked.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If RQF_IO_STAT is set, then accounting is enabled. There's no need to
further gate this on req->part being set or not, RQF_IO_STAT should
never be set if accounting is not being done for this request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than have blk_do_io_stat() check for both RQF_IO_STAT and whether
the request is a passthrough requests every time, move both of those
checks into blk_account_io_start(). Then blk_do_io_stat() can be reduced
to just checking for RQF_IO_STAT.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently FMODE_CAN_ATOMIC_WRITE is set if the bdev can atomic write and
the file is open for direct IO. This does not work if the file is not
opened for direct IO, yet fcntl(O_DIRECT) is used on the fd later.
Change to check for direct IO on a per-IO basis in
generic_atomic_write_valid(). Since we want to report -EOPNOTSUPP for
non-direct IO for an atomic write, change to return an error code.
Relocate the block fops atomic write checks to the common write path, as to
catch non-direct IO.
Fixes: c34fc6f26a ("fs: Initial atomic write support")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241019125113.369994-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=waNY
-----END PGP SIGNATURE-----
Merge tag 'block-6.12-20241018' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Fixes: 38cfb5a45e ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7b815817aa ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
needs to check queue mapping via tag set in hctx's cpuhp handler.
However, q->tag_set may not be setup yet when the cpuhp handler is
enabled, then kernel oops is triggered.
Fix the issue by setup queue tag_set before initializing hctx.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rick Koch <mr.rickkoch@gmail.com>
Closes: https://lore.kernel.org/linux-block/CANa58eeNDozLaBHKPLxSAhEy__FPfJT_F71W=sEQw49UCrC9PQ@mail.gmail.com
Fixes: 7b815817aa ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241014005115.2699642-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e4eb37cc0f ("block: Remove elevator required features")
removed the usage of `struct request_queue` from elevator_find_get(),
but didn't removed the argument.
Remove the "struct request_queue *q" argument from elevator_find_get()
given it is useless.
Fixes: e4eb37cc0f ("block: Remove elevator required features")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011155615.3361143-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever an I/O elevator is changed, the system attempts to load a
module for the new elevator. This occurs regardless of whether the
elevator is already loaded or built directly into the kernel. This
behavior introduces unnecessary overhead and potential issues.
This makes the operation slower, and more error-prone. For instance,
making the problem fixed by [1] visible for users that doesn't even rely
on modules being available through modules.
Do not try to load the ioscheduler if it is already visible.
This change brings two main benefits: it improves the performance of
elevator changes, and it reduces the likelihood of errors occurring
during this process.
[1] Commit e3accac1a9 ("block: Fix elv_iosched_local_module handling of "none" scheduler")
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011170122.3880087-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241007111416.13814-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
These are called from blkcg_print_blkgs() which already disables IRQs so
disabling it again is wrong. It means that IRQs will be enabled slightly
earlier than intended, however, so far as I can see, this bug is harmless.
Fixes: 35198e3230 ("blk-iocost: read params inside lock in sysfs apis")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Zv0kudA9xyGdaA4g@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the documentation to match the new function signature.
Fixes: 76c313f658 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240922141800.3622319-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=yiWu
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvwAKCRCRxhvAZXjc
ohg3APwJWQnqFlBddcRl4yrPJ/cgcYSYAOdHb+E+blomSwdxcwEAmwsnLPNQOtw2
rxKvQfZqhVT437bl7RpPPZrHGxwTng8=
=6v1r
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs blocksize updates from Christian Brauner:
"This contains the vfs infrastructure as well as the xfs bits to enable
support for block sizes (bs) larger than page sizes (ps) plus a few
fixes to related infrastructure.
There has been efforts over the last 16 years to enable enable Large
Block Sizes (LBS), that is block sizes in filesystems where bs > page
size. Through these efforts we have learned that one of the main
blockers to supporting bs > ps in filesystems has been a way to
allocate pages that are at least the filesystem block size on the page
cache where bs > ps.
Thanks to various previous efforts it is possible to support bs > ps
in XFS with only a few changes in XFS itself. Most changes are to the
page cache to support minimum order folio support for the target block
size on the filesystem.
A motivation for Large Block Sizes today is to support high-capacity
(large amount of Terabytes) QLC SSDs where the internal Indirection
Unit (IU) are typically greater than 4k to help reduce DRAM and so in
turn cost and space. In practice this then allows different
architectures to use a base page size of 4k while still enabling
support for block sizes aligned to the larger IUs by relying on high
order folios on the page cache when needed.
It also allows to take advantage of the drive's support for atomics
larger than 4k with buffered IO support in Linux. As described this
year at LSFMM, supporting large atomics greater than 4k enables
databases to remove the need to rely on their own journaling, so they
can disable double buffered writes, which is a feature different cloud
providers are already enabling through custom storage solutions"
* tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
Documentation: iomap: fix a typo
iomap: remove the iomap_file_buffered_write_punch_delalloc return value
iomap: pass the iomap to the punch callback
iomap: pass flags to iomap_file_buffered_write_punch_delalloc
iomap: improve shared block detection in iomap_unshare_iter
iomap: handle a post-direct I/O invalidate race in iomap_write_delalloc_release
docs:filesystems: fix spelling and grammar mistakes in iomap design page
filemap: fix htmldoc warning for mapping_align_index()
iomap: make zero range flush conditional on unwritten mappings
iomap: fix handling of dirty folios over unwritten extents
iomap: add a private argument for iomap_file_buffered_write
iomap: remove set_memor_ro() on zero page
xfs: enable block size larger than page size support
xfs: make the calculation generic in xfs_sb_validate_fsb_count()
xfs: expose block size in stat
xfs: use kvmalloc for xattr buffers
iomap: fix iomap_dio_zero() for fs bs > system page size
filemap: cap PTE range to be created to allowed zero fill in folio_map_range()
mm: split a folio in minimum folio order chunks
readahead: allocate folios with mapping_min_order in readahead
...
blk_limits_io_min and blk_limits_io_opt are unused since the
recent commit
0a94a469a4 ("dm: stop using blk_limits_io_{min,opt}")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920004817.676216-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr). There are no user visible core changes and a whole series of
minor updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZuvd5yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishV7dAQC+TSlv
BeNm8W4yAFCXLCwnJh8rT6ZzuBsjsIHH1DPP3wD+IXuIOFf5gVRJGpCNJc/dI082
/ehSrIdeJxwaNoOOt+Y=
=SXZD
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
mpi3mr).
There are no user visible core changes and a whole series of minor
updates and fixes. The largest core change is probably the
simplification of the workqueue allocation path"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
scsi: smartpqi: update driver version to 2.1.30-031
scsi: smartpqi: fix volume size updates
scsi: smartpqi: fix rare system hang during LUN reset
scsi: smartpqi: add new controller PCI IDs
scsi: smartpqi: add counter for parity write stream requests
scsi: smartpqi: correct stream detection
scsi: smartpqi: Add fw log to kdump
scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
scsi: ufs: core: Remove ufshcd_urgent_bkops()
scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
scsi: bnx2i: Remove unused declarations
scsi: core: Simplify an alloc_workqueue() invocation
scsi: ufs: Simplify alloc*_workqueue() invocation
scsi: stex: Simplify an alloc_ordered_workqueue() invocation
scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
scsi: snic: Simplify alloc_workqueue() invocations
scsi: qedi: Simplify an alloc_workqueue() invocation
scsi: qedf: Simplify alloc_workqueue() invocations
scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
...
Commit 734e1a8603 ("block: Prevent deadlocks when switching
elevators") introduced the function elv_iosched_load_module() to allow
loading an elevator module outside of elv_iosched_store() with the
target device queue not frozen, to avoid deadlocks. However, the "none"
scheduler does not have a module and as a result,
elv_iosched_load_module() always returns an error when trying to switch
to this valid scheduler.
Fix this by ignoring the return value of the request_module() call
done by elv_iosched_load_module(). This restores the behavior before
commit 734e1a8603, which was to ignore the request_module() result and
instead rely on elevator_change() to handle the "none" scheduler case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 734e1a8603 ("block: Prevent deadlocks when switching elevators")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240917133231.134806-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbm9fQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXcwH/A8+IXnrGv+VzYgD
+mE4hgGGHt4dClcUZ31gQetkkT6xktEVp6pB6JkFO7oEgBiTkJBbYGl6VZtsAIOd
Fi3jic8ik0uhZLFcxDJcHTceh6Pw8bkhWoh0tkF3bkDRwbppJdG7Khyk8DxTl24w
ldqh9om2cC7w9IPVx93xTgKgMMZ63qiJyUdTvxEZI3BG8F70smlgZSPskLp2Iktd
FIJZPcyKM0bhJYwZOpXK0vx5C2cA4oIW4xriHUw4aklv646OBxNKevB2JJAft2uA
6LyvuLgnYn/OpdFGZ8slvdmhm6hLWft5B1/bWKorUkz7p5YGiySFzpkMVAkNJ6mS
cRwHJNc=
=flw3
-----END PGP SIGNATURE-----
Merge tag 'v6.11' into for-6.12/block
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
- Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
- Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=JlJ2
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
bd_prepare_to_claim() waits for a var to change, not for a bit to be
cleared. Change from bit_waitqueue() to __var_waitqueue() and
correspondingly use wake_up_var(). This will allow a future patch which
change the "bit" function to expect an "unsigned long *" instead of
"void *".
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20240826063659.15327-2-neilb@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=HIAO
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM framework to static calls
This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.
- Add the Integrity Policy Enforcement (IPE) LSM
This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.
Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.
- Move the lifecycle management of the LSM blobs to the LSM framework
Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.
Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.
- Fix problems with the LSM's handling of F_SETOWN
The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.
- Fix potential problems with the security_inode_free() LSM hook
Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.
Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.
- Refactor two LSM hooks to better fit the LSM return value patterns
The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.
- Various cleanups and improvements
A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.
* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...
-----BEGIN PGP SIGNATURE-----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=wlzo
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux
Pull io_uring async discard support from Jens Axboe:
"Sitting on top of both the 6.12 block and io_uring core branches,
here's support for async discard through io_uring.
This allows applications to issue async discards, rather than rely on
the blocking sync ioctl discards we already have. The sync support is
difficult to use outside of idle/cleanup periods.
On a real (but slow) device, testing shows the following results when
compared to sync discard:
qd64 sync discard: 21K IOPS, lat avg 3 msec (max 21 msec)
qd64 async discard: 76K IOPS, lat avg 845 usec (max 2.2 msec)
qd64 sync discard: 14K IOPS, lat avg 5 msec (max 25 msec)
qd64 async discard: 56K IOPS, lat avg 1153 usec (max 3.6 msec)
and synthetic null_blk testing with the same queue depth and block
size settings as above shows:
Type Trim size IOPS Lat avg (usec) Lat Max (usec)
==============================================================
sync 4k 144K 444 20314
async 4k 1353K 47 595
sync 1M 56K 1136 21031
async 1M 94K 680 760"
* tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux:
block: implement async io_uring discard cmd
block: introduce blk_validate_byte_range()
filemap: introduce filemap_invalidate_pages
io_uring/cmd: give inline space in request to cmds
io_uring/cmd: expose iowq to cmds
-----BEGIN PGP SIGNATURE-----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=uuLl
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
omD7AQCZuWPXkEGYFD37MJZuRXNEoq7Tuj6yd0O2b5khUpzvyAD+MPuthGiCMPsu
voPpUP83x7T0D3JsEsCAXtNeVRcIBQI=
=xTs6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
ou77AQD3U1KjbdgzbUi6kaUmiiWOPhfYTlm8mho8dBjqvTCB+AD/XTWSFCWWhHB4
KyQZTbjRD81xmVNbKjASazp0EA6Ahwc=
=gIsD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
Make the integrity mapping more like data mapping, blk_rq_map_sg. Use
the request to validate the segment count, and update the callers so
they don't have to.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913191746.2628196-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no external users of this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240913182854.2445457-9-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
