The error messages could be more descriptive, but fix these caused by
file moves:
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
./drivers/gpu/drm/i915/i915_gem_shrinker.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
User command execution ./drivers/gpu/drm/i915/i915_gem_execbuffer.c'
failed with return code 1
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
./drivers/gpu/drm/i915/i915_gem_tiling.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
buffer object tiling ./drivers/gpu/drm/i915/i915_gem_tiling.c'
failed with return code 1
Fixes: 10be98a77c ("drm/i915: Move more GEM objects under gem/")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605095657.23601-1-jani.nikula@intel.com
Unlike ICL, EHL's combo PHYs can support HBR3 data rates. Note that
this just extends the upper limit; we will continue to honor the max
data rate specified in the VBT in cases where it is lower than HBR3.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605211832.23945-1-matthew.d.roper@intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com
This allows us to avoid iterating the child devices in some cases.
Also replace the presence bit with child device being non-NULL, and set
the child device pointer last to allow us to take advantage of it in
follow-up work.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ceccb75d637af3134d0328d67cbd6623932f94db.1559308269.git.jani.nikula@intel.com
In this patch, intel_color_get_config() is enabled and support
for read_luts() will be added platform by platform incrementally
in the follow-up patches.
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
-Added the user early on such that support for get_color_config()
can be added platform by platform incrementally [Jani]
v5: -Incorrect place for calling intel_color_get_config() in
haswell_get_pipe_config() [Ville]
v6: -Renamed intel_color_read_luts() to intel_color_get_config()
[Jani and Ville]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1559123462-7343-3-git-send-email-swati2.sharma@intel.com
In this patch, a vfunc read_luts() is introduced to create a hw lut
i.e. lut having values read from gamma/degamma registers which will
later be used to compare with sw lut to validate gamma/degamma lut values.
v3: -Rebase
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
-Wrapped get_color_config() [Jani]
v5: -Renamed intel_color_get_config() to intel_color_read_luts()
-Renamed get_color_config to read_luts
v6: -Renamed intel_color_read_luts() back to intel_color_get_config()
[Jani and Ville]
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1559123462-7343-2-git-send-email-swati2.sharma@intel.com
Instead of relying on the caller holding struct_mutex across the
allocation, push the allocation under a tree of spinlocks stored inside
the page tables. Not only should this allow us to avoid struct_mutex
here, but it will allow multiple users to lock independent ranges for
concurrent allocations, and operate independently. This is vital for
pushing the GTT manipulation into a background thread where dependency
on struct_mutex is verboten, and for allowing other callers to avoid
struct_mutex altogether.
v2: Restore lost GEM_BUG_ON for removing too many PTE from
gen6_ppgtt_clear_range.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604153830.19096-1-chris@chris-wilson.co.uk
As the fence registers are not part of the engine powerwells, we do not
need to fiddle with forcewake in order to update a fence. Avoid using
the heavyweight debug checking normal mmio writes as the checking
dominates the selftest runtime and is superfluous!
In the process, retire the I915_WRITE() implicit macro with the new
intel_uncore_write interface.
v2: s/unc/uncore/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604120022.20472-2-chris@chris-wilson.co.uk
Stop dumping plane->state for planes. That is the old state most of the
time and dumping stale information only serves to confuse people.
Instead dump the new state just for the planes included in the
operation. For now we'll include only the planes for the modeset/fastset
pipes in the dumps. But probably we want to dump them all eventually,
just not quite sure how to present that information nicely to the user.
And while at it let's dump a few more interesting bits from the state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-14-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Currently we're only dumping the failed crtc state if
intel_modeset_pipe_config() fails. Let's do the state
dump if anything else fails afterwards. The downside
is that we lose the immediate knowledge which crtc caused
the failure (unless a lower level function indicates it
with an additional debug print) but having the full state
dumped seems like something that could be beneficial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-12-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Currently we're not dumping out whether the crtc is actually
active or in dpms off state. Let's include that in the dumps.
And while at it compress out a few lines from the state dump.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Currently we're dumping the crtc states before they have
been fully calculated. Move the dumping to the end of
.atomic_check() so we get a fully up to date dump.
Let's also do the dump for fully disabled pipes, but we'll
limit that to just saying that the pipe is disabled since
the rest of the state is going to be nonsense in that case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-10-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Currently, the i2c adapter is available only under DP connectors.
Add i2c symlink under hdmi connector pointing to i2c adapter in order to
make this behaviour consistent.
The initial motivation was to make igt i2c subtest
patch [1] work on all connectors.
[1]: https://patchwork.freedesktop.org/series/60357/
v2:
- Moved symlink remove to unregister (Ville)
- Clarified commit message (Jani)
- Changed WARN to DRM_ERROR (Jani)
- Minor codestyle changes proposed by Jani
v3: added blank line
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520150642.3477-1-oleg.vasilev@intel.com
Move over structures, enums and macros from intel_display.h and
i915_drv.h to have all the display PM defines in the same header.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-3-daniele.ceraolospurio@intel.com
Keep all the device-level PM management in intel_runtime_pm.h/c and move
all the display specific bits into their own file. Also add the new
header to Makefile.header-test.
Apart from the giant code move, the only difference is with the
intel_runtime_<get/put>_raw() functions, which are now exposed in the
header. The _put() version is also not conditionally compiled anymore
since it is ok to always pass the wakeref taken from the _get() to
__intel_runtime_pm_put (it is -1 if tracking is disabled).
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-2-daniele.ceraolospurio@intel.com
Make sure the HW state of the port A combo PHY is correct wrt. the
IREFGEN setting. This will force a reprogramming during init or a WARN
during uninit if the setting is incorrect.
On my ICL RVP I haven't seen this check failing and leading to a forced
reinit/WARN, but let's add it still for consistency.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531082626.30640-1-imre.deak@intel.com
Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.
The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.
v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk
Currently the purgeable objects, I915_MADV_DONTNEED, are mixed in the
normal bound/unbound lists. Every shrinker pass starts with an attempt
to purge from this set of unneeded objects, which entails us doing a
walk over both lists looking for any candidates. If there are none, and
since we are shrinking we can reasonably assume that the lists are
full!, this becomes a very slow futile walk.
If we separate out the purgeable objects into own list, this search then
becomes its own phase that is preferentially handled during shrinking.
Instead the cost becomes that we then need to filter the purgeable list
if we want to distinguish between bound and unbound objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-1-chris@chris-wilson.co.uk
The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".
The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.
Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.
Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
The assignment of err is using the incorrect pointer vaddr that has
not been initialized. Fix this by using the correct pointer obj instead.
Addresses-Coverity: ("Uninitialized pointer read")
Fixes: 6501aa4e3a ("drm/i915: add in-kernel blitter client")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531103201.10124-1-colin.king@canonical.com
The normal behaviour is to periodically check for a mmio access error,
and once detected enable mmio access checking. However this is useless
if the error only occurs once during module load, and so we may miss
such errors in CI. To allow ourselves to catch them, allow CI to opt into
always enabling mmio debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530121311.6794-1-chris@chris-wilson.co.uk
Since the next entry is an offset from a pointer, it can not be NULL.
For simplicity, drop the extra conditional before calling cond_resched()
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530082358.13663-1-chris@chris-wilson.co.uk
In order to support driver hot unbind, some cleanup operations, now
performed on PCI driver remove, must be called later, after all device
file descriptors are closed.
Split out those operations from the tail of pci_driver.remove()
callback and put them into drm_driver.release() which is called as soon
as all references to the driver are put. As a result, those cleanups
will be now run on last drm_dev_put(), either still called from
pci_driver.remove() if all device file descriptors are already closed,
or on last drm_release() file operation.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530133105.30467-1-janusz.krzysztofik@linux.intel.com
The plan is to use the blitter engine for async object clearing when
using local memory, but before we can move the worker to get_pages() we
have to first tame some more of our struct_mutex usage. With this in
mind we should be able to upstream the object clearing as some
selftests, which should serve as a guinea pig for the ongoing locking
rework and upcoming async get_pages() framework.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-2-matthew.auld@intel.com
Some steps in gen6_alloc_va_range require the HW to be awake, so ideally
we should be grabbing the wakeref ourselves and not relying on the
caller already holding it for us.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-1-matthew.auld@intel.com
