Building BPF selftests with custom HOSTCFLAGS yields an error:
# make HOSTCFLAGS="-O2"
[...]
HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o
main.c:73:10: fatal error: linux/rbtree.h: No such file or directory
73 | #include <linux/rbtree.h>
| ^~~~~~~~~~~~~~~~
The reason is that tools/bpf/resolve_btfids/Makefile passes header
include paths by extending HOSTCFLAGS which is overridden by setting
HOSTCFLAGS in the make command (because of Makefile rules [1]).
This patch fixes the above problem by passing the include paths via
`HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include
and can be combined with overridding HOSTCFLAGS.
[1] https://www.gnu.org/software/make/manual/html_node/Overriding.html
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230530123352.1308488-1-vmalik@redhat.com
Add ability to specify a network interface used to resolve XDP hints
kfuncs when loading program through bpftool.
Usage:
bpftool prog load [...] xdpmeta_dev <ifname>
Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable
mistake that results in not very descriptive errors,
so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated,
followed by 'bpftool map create [...] dev <ifname>' for consistency.
Now, to offload program, execute:
bpftool prog load [...] offload_dev <ifname>
To offload map:
bpftool map create [...] offload_dev <ifname>
'dev <ifname>' still performs offloading in the commands above, but now
triggers a warning and is excluded from bash completion.
'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because
'xdpmeta_dev' basically makes a program device-bound without loading it
onto the said device. For now, offloaded programs cannot use XDP hints [0],
but if this changes, using 'offload_dev <ifname>' should cover this case.
[0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com
The target_btf_id can help us understand which kernel function is
linked by a tracing prog. The target_btf_id and target_obj_id have
already been exposed to userspace, so we just need to show them.
The result as follows,
$ tools/bpf/bpftool/bpftool link show
2: tracing prog 13
prog_type tracing attach_type trace_fentry
target_obj_id 1 target_btf_id 13964
pids trace(10673)
$ tools/bpf/bpftool/bpftool link show -j
[{"id":2,"type":"tracing","prog_id":13,"prog_type":"tracing","attach_type":"trace_fentry","target_obj_id":1,"target_btf_id":13964,"pids":[{"pid":10673,"comm":"trace"}]}]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230517103126.68372-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when using prog loadall and the pin path is a bpffs mountpoint,
bpffs will be repeatedly mounted to the parent directory of the bpffs
mountpoint path. For example, a `bpftool prog loadall test.o /sys/fs/bpf`
will trigger this.
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/1683342439-3677-1-git-send-email-yangpc@wangsu.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZGKqEAAKCRDbK58LschI
g6LYAQDp1jAszCOkmJ8VUA0ZyC5NAFDv+7y9Nd1toYWYX1btzAEAkf8+5qBJ1qmI
P5M0hjMTbH4MID9Aql10ZbMHheyOBAo=
=NUQM
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-16
We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).
The main changes are:
1) Add precision propagation to verifier for subprogs and callbacks,
from Andrii Nakryiko.
2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
from Stanislav Fomichev.
3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
inconsistent function prototypes, from Alan Maguire.
4) Various dyn-pointer verifier improvements to relax restrictions,
from Daniel Rosenberg.
5) Add a new bpf_task_under_cgroup() kfunc for designated task,
from Feng Zhou.
6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
from Florent Revest.
7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
from Jesper Dangaard Brouer.
8) Add several new dyn-pointer kfuncs to ease their usability,
from Joanne Koong.
9) Add in-depth LRU internals description and dot function graph,
from Joe Stringer.
10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
from Martin KaFai Lau.
11) Only dump unprivileged_bpf_disabled log warning upon write,
from Kui-Feng Lee.
12) Extend test_progs to directly passing allow/denylist file,
from Stephen Veiss.
13) Fix BPF trampoline memleak upon failure attaching to fentry,
from Yafang Shao.
14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
bpf: Fix memleak due to fentry attach failure
bpf: Remove bpf trampoline selector
bpf, arm64: Support struct arguments in the BPF trampoline
bpftool: JIT limited misreported as negative value on aarch64
bpf: fix calculation of subseq_idx during precision backtracking
bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
bpf: Document EFAULT changes for sockopt
selftests/bpf: Correctly handle optlen > 4096
selftests/bpf: Update EFAULT {g,s}etsockopt selftests
bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
libbpf: fix offsetof() and container_of() to work with CO-RE
bpf: Address KCSAN report on bpf_lru_list
bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
selftests/bpf: Accept mem from dynptr in helper funcs
bpf: verifier: Accept dynptr mem as mem in helpers
selftests/bpf: Check overflow in optional buffer
selftests/bpf: Test allowing NULL buffer in dynptr slice
bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
selftests/bpf: Add testcase for bpf_task_under_cgroup
bpf: Add bpf_task_under_cgroup() kfunc
...
====================
Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:
$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes
This is because /proc/sys/net/core/bpf_jit_limit reports
$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520
...and an int is assumed in read_procfs(). Change read_procfs()
to return a long to avoid negative value reporting.
Fixes: 7a4522bbef ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA
jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E
r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM=
=2CUV
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
When using `bpftool map dump` with map_of_maps, it is usually
more convenient to show the inner map id instead of raw value.
We are changing the plain print behavior to show inner_map_id
instead of hex value, this would help with quick look up of
inner map with `bpftool map dump id <inner_map_id>`.
To avoid disrupting scripted behavior, we will add a new
`inner_map_id` field to json output instead of replacing value.
plain print:
```
$ bpftool map dump id 138
Without Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
value:
8b 00 00 00
Found 1 element
With Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
inner_map_id:
139
Found 1 element
```
json print:
```
$ bpftool -p map dump id 567
Without Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
]
}
]
With Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
],
"inner_map_id": 568
}
]
```
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230427120313.43574-1-kuro@kuroa.me
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
A new link type, BPF_LINK_TYPE_STRUCT_OPS, was added to attach
struct_ops to links. (226bc6ae64) It would be helpful for users to
know which map is associated with the link.
The assumption was that every link is associated with a BPF program, but
this does not hold true for struct_ops. It would be better to display
map_id instead of prog_id for struct_ops links. However, some tools may
rely on the old assumption and need a prog_id. The discussion on the
mailing list suggests that tools should parse JSON format. We will maintain
the existing JSON format by adding a map_id without removing prog_id. As
for plain text format, we will remove prog_id from the header line and add
a map_id for struct_ops links.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230421214131.352662-1-kuifeng@meta.com
The "struct_ops register" subcommand now allows for an optional *LINK_DIR*
to be included. This specifies the directory path where bpftool will pin
struct_ops links with the same name as their corresponding map names.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
You can include an optional path after specifying the object name for the
'struct_ops register' subcommand.
Since the commit 226bc6ae64 ("Merge branch 'Transit between BPF TCP
congestion controls.'") has been accepted, it is now possible to create a
link for a struct_ops. This can be done by defining a struct_ops in
SEC(".struct_ops.link") to make libbpf returns a real link. If we don't pin
the links before leaving bpftool, they will disappear. To instruct bpftool
to pin the links in a directory with the names of the maps, we need to
provide the path of that directory.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-1-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The recent support for inline annotations in control flow graphs
generated by bpftool introduced the usage of the "__fallthrough" macro
in a switch/case block in btf_dumper.c. This change went through the
bpf-next tree, but resulted in a merge conflict in linux-next, because
this macro has been renamed "fallthrough" (no underscores) in the
meantime.
To address the conflict, we temporarily switch to a simple comment
instead of a macro.
Related: commit f7a858bffc ("tools: Rename __fallthrough to fallthrough")
Fixes: 9fd496848b ("bpftool: Support inline annotations when dumping the CFG of a program")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/all/yt9dttxlwal7.fsf@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230412123636.2358949-1-tmricht@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230420003333.90901-1-quentin@isovalent.com
ELF is acronym and therefore should be spelled in all caps.
I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like
being written in the first person.
Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit d6e6286a12 ("libbpf: disassociate section handler on explicit
bpf_program__set_type() call"), bpf_program__set_type() will force cleanup
the program's SEC() definition, this commit fixed the test helper but missed
the bpftool, which leads to bpftool prog autoattach broken as follows:
$ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach
Program spi_xfer_r1v1 does not support autoattach, falling back to pinning
This patch fix bpftool to set program type only if it differs.
Fixes: d6e6286a12 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407081427.2621590-1-weiyongjun@huaweicloud.com
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add libsubcmd to .gitignore, otherwise after compiling the kernel it
would result in the following:
# bpf-next...bpf-next/master
?? tools/bpf/resolve_btfids/libsubcmd/
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_F13D670D5D7AA9C4BD868D3220921AAC090A@qq.com
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes: b66e907cfe ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Split the bpf_obj_get_info_by_fd() call in build_btf_type_table() in
two, since knowing the type helps with the Memory Sanitizer.
Improve map_parse_fd_and_info() type safety by using
struct bpf_map_info * instead of void * for info.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230214231221.249277-4-iii@linux.ibm.com
Thorsten reported build issue with command line that defined extra
HOSTCFLAGS that were not passed into 'prepare' targets, but were
used to build resolve_btfids objects.
This results in build fail when these objects are linked together:
/usr/bin/ld: /build.../tools/bpf/resolve_btfids//libbpf/libbpf.a(libbpf-in.o):
relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE \
object; recompile with -fPIE
Fixing this by passing HOSTCFLAGS in EXTRA_CFLAGS as part of
HOST_OVERRIDES variable for prepare targets.
[1] https://lore.kernel.org/bpf/f7922132-6645-6316-5675-0ece4197bfff@leemhuis.info/
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20230209143735.4112845-1-jolsa@kernel.org
Don't set EXTRA_CFLAGS to HOSTCFLAGS, ensure CROSS_COMPILE isn't
passed through.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230202224253.40283-1-irogers@google.com
Making resolve_btfids to be compiled as host program so
we can avoid cross compile issues as reported by Nathan.
Also we no longer need HOST_OVERRIDES for BINARY target,
just for 'prepare' targets.
Fixes: 13e07691a1 ("tools/resolve_btfids: Alter how HOSTCC is forced")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20230202112839.1131892-1-jolsa@kernel.org
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
HOSTCC is always wanted when building. Setting CC to HOSTCC happens
after tools/scripts/Makefile.include is included, meaning flags are
set assuming say CC is gcc, but then it can be later set to HOSTCC
which may be clang. tools/scripts/Makefile.include is needed for host
set up and common macros in objtool's Makefile. Rather than override
CC to HOSTCC, just pass CC as HOSTCC to Makefile.build, the libsubcmd
builds and the linkage step. This means the Makefiles don't see things
like CC changing and tool flag determination, and similar, work
properly.
Also, clear the passed subdir as otherwise an outer build may break by
inadvertently passing an inappropriate value.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230124064324.672022-2-irogers@google.com
Previously tools/lib/subcmd was added to the include path, switch to
installing the headers and then including from that directory. This
avoids dependencies on headers internal to tools/lib/subcmd. Add the
missing subcmd directory to the affected #include.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230124064324.672022-1-irogers@google.com
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Bug: https://bugs.gentoo.org/890638
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
When bpftool feature does not find kernel config
files under default path or wrong format,
do not output CONFIG_XYZ is not set.
Skip kernel config check and continue.
Signed-off-by: Chethan Suresh <chethan.suresh@sony.com>
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230109023742.29657-1-chethan.suresh@sony.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When passing compiler variables like CC=$(HOSTCC) to a submake
we must ensure the variable is quoted in order to handle cases
where $(HOSTCC) may be multiple binaries.
For example when using ccache $HOSTCC may be:
"/usr/bin/ccache /usr/bin/gcc"
If we pass CC without quotes like CC=$(HOSTCC) only the first
"/usr/bin/ccache" part will be assigned to the CC variable which
will cause an error due to dropping the "/usr/bin/gcc" part of
the variable in the submake invocation.
This fixes errors such as:
/usr/bin/ccache: invalid option -- 'd'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230110014504.3120711-1-james.hilliard1@gmail.com
Since the commit eb9d1acf63 ("bpftool: Add LLVM as default library for
disassembling JIT-ed programs") we might link the bpftool program with the
libllvm library. This works fine when a shared libllvm library is available,
but fails if we want to link bpftool with a statically built LLVM:
[...]
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContextCleanup::~CrashRecoveryContextCleanup()':
CrashRecoveryContext.cpp:(.text._ZN4llvm27CrashRecoveryContextCleanupD0Ev+0x17): undefined reference to `operator delete(void*, unsigned long)'
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContext::~CrashRecoveryContext()':
CrashRecoveryContext.cpp:(.text._ZN4llvm20CrashRecoveryContextD2Ev+0xc8): undefined reference to `operator delete(void*, unsigned long)'
[...]
So in the case of static libllvm we need to explicitly link bpftool with
required libraries, namely, libstdc++ and those provided by the `llvm-config
--system-libs` command. We can distinguish between the shared and static cases
by using the `llvm-config --shared-mode` command.
Fixes: eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221222102627.1643709-1-aspsk@isovalent.com
Remove the empty vmlinux.h if bpftool failed to dump btf info.
The empty vmlinux.h can hide real error when reading output
of make.
This is done by adding .DELETE_ON_ERROR special target in related
makefiles.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20221217223509.88254-3-changbin.du@gmail.com
When libelf was not installed in the standard location, it cannot be
located by the current building config.
Use pkg-config to help locate libelf in such cases.
Signed-off-by: Shen Jiamin <shen_jiamin@comp.nus.edu.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20221215044703.400139-1-shen_jiamin@comp.nus.edu.sg
strdup() allocates memory for path. We need to release the memory in the
following error path. Add free() to avoid memory leak.
Fixes: 8f184732b6 ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221206071906.806384-1-linmq006@gmail.com
The function contains a single btf__free() call which can be
inlined. Credits to Yonghong Song.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-6-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool is now totally compliant with libbpf 1.0 mode and is not
expected to be compiled with pre-1.0, let's clean-up the usage of
libbpf_get_error().
The changes stay aligned with returned errors always negative.
- In tools/bpf/bpftool/btf.c This fixes an uninitialized local
variable `err` in function do_dump() because it may now be returned
without having been set.
- This also removes the checks on NULL pointers before calling
btf__free() because that function already does the check.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Link: https://lore.kernel.org/r/20221120112515.38165-5-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is expected that errno be passed to strerror(). This also cleans
this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-4-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no reasons to keep PTR_ERR() when kern_btf=NULL, let's just
return 0.
This also cleans this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-3-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If the parameters for batch are more than 2, check argc first can
return immediately, no need to use is_prefix() to check "file" with
a little overhead and then check argc, it is better to check "file"
only when the parameters for batch are 2.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/1668517207-11822-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Y+/e
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/20221111233733.1088228-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
