167 Commits

Author	SHA1	Message	Date
Matthew Wilcox (Oracle)	2f52578f9c	mm/util: Add folio_mapping() and folio_file_mapping() ... These are the folio equivalent of page_mapping() and page_file_mapping(). Add an out-of-line page_mapping() wrapper around folio_mapping() in order to prevent the page_folio() call from bloating every caller of page_mapping(). Adjust page_file_mapping() and page_mapping_file() to use folios internally. Rename __page_file_mapping() to swapcache_mapping() and change it to take a folio. This ends up saving 122 bytes of text overall. folio_mapping() is 45 bytes shorter than page_mapping() was, but the new page_mapping() wrapper is 30 bytes. The major reduction is a few bytes less in dozens of nfs functions (which call page_file_mapping()). Most of these appear to be a slight change in gcc's register allocation decisions, which allow: 48 8b 56 08 mov 0x8(%rsi),%rdx 48 8d 42 ff lea -0x1(%rdx),%rax 83 e2 01 and $0x1,%edx 48 0f 44 c6 cmove %rsi,%rax to become: 48 8b 46 08 mov 0x8(%rsi),%rax 48 8d 78 ff lea -0x1(%rax),%rdi a8 01 test $0x1,%al 48 0f 44 fe cmove %rsi,%rdi for a reduction of a single byte. Once the NFS client is converted to use folios, this entire sequence will disappear. Also add folio_mapping() documentation. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeff Layton <jlayton@kernel.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: David Howells <dhowells@redhat.com>	2021-09-27 09:27:30 -04:00
SeongJae Park	2224d84854	mm: introduce Data Access MONitor (DAMON) ... Patch series "Introduce Data Access MONitor (DAMON)", v34. Introduction ============ DAMON is a data access monitoring framework for the Linux kernel. The core mechanisms of DAMON called 'region based sampling' and 'adaptive regions adjustment' (refer to 'mechanisms.rst' in the 11th patch of this patchset for the detail) make it - accurate (The monitored information is useful for DRAM level memory management. It might not appropriate for Cache-level accuracy, though.), - light-weight (The monitoring overhead is low enough to be applied online while making no impact on the performance of the target workloads.), and - scalable (the upper-bound of the instrumentation overhead is controllable regardless of the size of target workloads.). Using this framework, therefore, several memory management mechanisms such as reclamation and THP can be optimized to aware real data access patterns. Experimental access pattern aware memory management optimization works that incurring high instrumentation overhead will be able to have another try. Though DAMON is for kernel subsystems, it can be easily exposed to the user space by writing a DAMON-wrapper kernel subsystem. Then, user space users who have some special workloads will be able to write personalized tools or applications for deeper understanding and specialized optimizations of their systems. DAMON is also merged in two public Amazon Linux kernel trees that based on v5.4.y[1] and v5.10.y[2]. [1] https://github.com/amazonlinux/linux/tree/amazon-5.4.y/master/mm/damon [2] https://github.com/amazonlinux/linux/tree/amazon-5.10.y/master/mm/damon The userspace tool[1] is available, released under GPLv2, and actively being maintained. I am also planning to implement another basic user interface in perf[2]. Also, the basic test suite for DAMON is available under GPLv2[3]. [1] https://github.com/awslabs/damo [2] https://lore.kernel.org/linux-mm/20210107120729.22328-1-sjpark@amazon.com/ [3] https://github.com/awslabs/damon-tests Long-term Plan -------------- DAMON is a part of a project called Data Access-aware Operating System (DAOS). As the name implies, I want to improve the performance and efficiency of systems using fine-grained data access patterns. The optimizations are for both kernel and user spaces. I will therefore modify or create kernel subsystems, export some of those to user space and implement user space library / tools. Below shows the layers and components for the project. --------------------------------------------------------------------------- Primitives: PTE Accessed bit, PG_idle, rmap, (Intel CMT), ... Framework: DAMON Features: DAMOS, virtual addr, physical addr, ... Applications: DAMON-debugfs, (DARC), ... ^^^^^^^^^^^^^^^^^^^^^^^ KERNEL SPACE ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Raw Interface: debugfs, (sysfs), (damonfs), tracepoints, (sys_damon), ... vvvvvvvvvvvvvvvvvvvvvvv USER SPACE vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv Library: (libdamon), ... Tools: DAMO, (perf), ... --------------------------------------------------------------------------- The components in parentheses or marked as '...' are not implemented yet but in the future plan. IOW, those are the TODO tasks of DAOS project. For more detail, please refer to the plans: https://lore.kernel.org/linux-mm/20201202082731.24828-1-sjpark@amazon.com/ Evaluations =========== We evaluated DAMON's overhead, monitoring quality and usefulness using 24 realistic workloads on my QEMU/KVM based virtual machine running a kernel that v24 DAMON patchset is applied. DAMON is lightweight. It increases system memory usage by 0.39% and slows target workloads down by 1.16%. DAMON is accurate and useful for memory management optimizations. An experimental DAMON-based operation scheme for THP, namely 'ethp', removes 76.15% of THP memory overheads while preserving 51.25% of THP speedup. Another experimental DAMON-based 'proactive reclamation' implementation, 'prcl', reduces 93.38% of residential sets and 23.63% of system memory footprint while incurring only 1.22% runtime overhead in the best case (parsec3/freqmine). NOTE that the experimental THP optimization and proactive reclamation are not for production but only for proof of concepts. Please refer to the official document[1] or "Documentation/admin-guide/mm: Add a document for DAMON" patch in this patchset for detailed evaluation setup and results. [1] https://damonitor.github.io/doc/html/latest-damon/admin-guide/mm/damon/eval.html Real-world User Story ===================== In summary, DAMON has used on production systems and proved its usefulness. DAMON as a profiler ------------------- We analyzed characteristics of a large scale production systems of our customers using DAMON. The systems utilize 70GB DRAM and 36 CPUs. From this, we were able to find interesting things below. There were obviously different access pattern under idle workload and active workload. Under the idle workload, it accessed large memory regions with low frequency, while the active workload accessed small memory regions with high freuqnecy. DAMON found a 7GB memory region that showing obviously high access frequency under the active workload. We believe this is the performance-effective working set and need to be protected. There was a 4KB memory region that showing highest access frequency under not only active but also idle workloads. We think this must be a hottest code section like thing that should never be paged out. For this analysis, DAMON used only 0.3-1% of single CPU time. Because we used recording-based analysis, it consumed about 3-12 MB of disk space per 20 minutes. This is only small amount of disk space, but we can further reduce the disk usage by using non-recording-based DAMON features. I'd like to argue that only DAMON can do such detailed analysis (finding 4KB highest region in 70GB memory) with the light overhead. DAMON as a system optimization tool ----------------------------------- We also found below potential performance problems on the systems and made DAMON-based solutions. The system doesn't want to make the workload suffer from the page reclamation and thus it utilizes enough DRAM but no swap device. However, we found the system is actively reclaiming file-backed pages, because the system has intensive file IO. The file IO turned out to be not performance critical for the workload, but the customer wanted to ensure performance critical file-backed pages like code section to not mistakenly be evicted. Using direct IO should or `mlock()` would be a straightforward solution, but modifying the user space code is not easy for the customer. Alternatively, we could use DAMON-based operation scheme[1]. By using it, we can ask DAMON to track access frequency of each region and make 'process_madvise(MADV_WILLNEED)[2]' call for regions having specific size and access frequency for a time interval. We also found the system is having high number of TLB misses. We tried 'always' THP enabled policy and it greatly reduced TLB misses, but the page reclamation also been more frequent due to the THP internal fragmentation caused memory bloat. We could try another DAMON-based operation scheme that applies 'MADV_HUGEPAGE' to memory regions having >=2MB size and high access frequency, while applying 'MADV_NOHUGEPAGE' to regions having <2MB size and low access frequency. We do not own the systems so we only reported the analysis results and possible optimization solutions to the customers. The customers satisfied about the analysis results and promised to try the optimization guides. [1] https://lore.kernel.org/linux-mm/20201006123931.5847-1-sjpark@amazon.com/ [2] https://lore.kernel.org/linux-api/20200622192900.22757-4-minchan@kernel.org/ Comparison with Idle Page Tracking ================================== Idle Page Tracking allows users to set and read idleness of pages using a bitmap file which represents each page with each bit of the file. One recommended usage of it is working set size detection. Users can do that by 1. find PFN of each page for workloads in interest, 2. set all the pages as idle by doing writes to the bitmap file, 3. wait until the workload accesses its working set, and 4. read the idleness of the pages again and count pages became not idle. NOTE: While Idle Page Tracking is for user space users, DAMON is primarily designed for kernel subsystems though it can easily exposed to the user space. Hence, this section only assumes such user space use of DAMON. For what use cases Idle Page Tracking would be better? ------------------------------------------------------ 1. Flexible usecases other than hotness monitoring. Because Idle Page Tracking allows users to control the primitive (Page idleness) by themselves, Idle Page Tracking users can do anything they want. Meanwhile, DAMON is primarily designed to monitor the hotness of each memory region. For this, DAMON asks users to provide sampling interval and aggregation interval. For the reason, there could be some use case that using Idle Page Tracking is simpler. 2. Physical memory monitoring. Idle Page Tracking receives PFN range as input, so natively supports physical memory monitoring. DAMON is designed to be extensible for multiple address spaces and use cases by implementing and using primitives for the given use case. Therefore, by theory, DAMON has no limitation in the type of target address space as long as primitives for the given address space exists. However, the default primitives introduced by this patchset supports only virtual address spaces. Therefore, for physical memory monitoring, you should implement your own primitives and use it, or simply use Idle Page Tracking. Nonetheless, RFC patchsets[1] for the physical memory address space primitives is already available. It also supports user memory same to Idle Page Tracking. [1] https://lore.kernel.org/linux-mm/20200831104730.28970-1-sjpark@amazon.com/ For what use cases DAMON is better? ----------------------------------- 1. Hotness Monitoring. Idle Page Tracking let users know only if a page frame is accessed or not. For hotness check, the user should write more code and use more memory. DAMON do that by itself. 2. Low Monitoring Overhead DAMON receives user's monitoring request with one step and then provide the results. So, roughly speaking, DAMON require only O(1) user/kernel context switches. In case of Idle Page Tracking, however, because the interface receives contiguous page frames, the number of user/kernel context switches increases as the monitoring target becomes complex and huge. As a result, the context switch overhead could be not negligible. Moreover, DAMON is born to handle with the monitoring overhead. Because the core mechanism is pure logical, Idle Page Tracking users might be able to implement the mechanism on their own, but it would be time consuming and the user/kernel context switching will still more frequent than that of DAMON. Also, the kernel subsystems cannot use the logic in this case. 3. Page granularity working set size detection. Until v22 of this patchset, this was categorized as the thing Idle Page Tracking could do better, because DAMON basically maintains additional metadata for each of the monitoring target regions. So, in the page granularity working set size detection use case, DAMON would incur (number of monitoring target pages * size of metadata) memory overhead. Size of the single metadata item is about 54 bytes, so assuming 4KB pages, about 1.3% of monitoring target pages will be additionally used. All essential metadata for Idle Page Tracking are embedded in 'struct page' and page table entries. Therefore, in this use case, only one counter variable for working set size accounting is required if Idle Page Tracking is used. There are more details to consider, but roughly speaking, this is true in most cases. However, the situation changed from v23. Now DAMON supports arbitrary types of monitoring targets, which don't use the metadata. Using that, DAMON can do the working set size detection with no additional space overhead but less user-kernel context switch. A first draft for the implementation of monitoring primitives for this usage is available in a DAMON development tree[1]. An RFC patchset for it based on this patchset will also be available soon. Since v24, the arbitrary type support is dropped from this patchset because this patchset doesn't introduce real use of the type. You can still get it from the DAMON development tree[2], though. [1] https://github.com/sjp38/linux/tree/damon/pgidle_hack [2] https://github.com/sjp38/linux/tree/damon/master 4. More future usecases While Idle Page Tracking has tight coupling with base primitives (PG_Idle and page table Accessed bits), DAMON is designed to be extensible for many use cases and address spaces. If you need some special address type or want to use special h/w access check primitives, you can write your own primitives for that and configure DAMON to use those. Therefore, if your use case could be changed a lot in future, using DAMON could be better. Can I use both Idle Page Tracking and DAMON? -------------------------------------------- Yes, though using them concurrently for overlapping memory regions could result in interference to each other. Nevertheless, such use case would be rare or makes no sense at all. Even in the case, the noise would bot be really significant. So, you can choose whatever you want depending on the characteristics of your use cases. More Information ================ We prepared a showcase web site[1] that you can get more information. There are - the official documentations[2], - the heatmap format dynamic access pattern of various realistic workloads for heap area[3], mmap()-ed area[4], and stack[5] area, - the dynamic working set size distribution[6] and chronological working set size changes[7], and - the latest performance test results[8]. [1] https://damonitor.github.io/_index [2] https://damonitor.github.io/doc/html/latest-damon [3] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.0.png.html [4] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html [5] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.2.png.html [6] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html [7] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html [8] https://damonitor.github.io/test/result/perf/latest/html/index.html Baseline and Complete Git Trees =============================== The patches are based on the latest -mm tree, specifically v5.14-rc1-mmots-2021-07-15-18-47 of https://github.com/hnaz/linux-mm. You can also clone the complete git tree: $ git clone git://github.com/sjp38/linux -b damon/patches/v34 The web is also available: https://github.com/sjp38/linux/releases/tag/damon/patches/v34 Development Trees ----------------- There are a couple of trees for entire DAMON patchset series and features for future release. - For latest release: https://github.com/sjp38/linux/tree/damon/master - For next release: https://github.com/sjp38/linux/tree/damon/next Long-term Support Trees ----------------------- For people who want to test DAMON but using LTS kernels, there are another couple of trees based on two latest LTS kernels respectively and containing the 'damon/master' backports. - For v5.4.y: https://github.com/sjp38/linux/tree/damon/for-v5.4.y - For v5.10.y: https://github.com/sjp38/linux/tree/damon/for-v5.10.y Amazon Linux Kernel Trees ------------------------- DAMON is also merged in two public Amazon Linux kernel trees that based on v5.4.y[1] and v5.10.y[2]. [1] https://github.com/amazonlinux/linux/tree/amazon-5.4.y/master/mm/damon [2] https://github.com/amazonlinux/linux/tree/amazon-5.10.y/master/mm/damon Git Tree for Diff of Patches ============================ For easy review of diff between different versions of each patch, I prepared a git tree containing all versions of the DAMON patchset series: https://github.com/sjp38/damon-patches You can clone it and use 'diff' for easy review of changes between different versions of the patchset. For example: $ git clone https://github.com/sjp38/damon-patches && cd damon-patches $ diff -u damon/v33 damon/v34 Sequence Of Patches =================== First three patches implement the core logics of DAMON. The 1st patch introduces basic sampling based hotness monitoring for arbitrary types of targets. Following two patches implement the core mechanisms for control of overhead and accuracy, namely regions based sampling (patch 2) and adaptive regions adjustment (patch 3). Now the essential parts of DAMON is complete, but it cannot work unless someone provides monitoring primitives for a specific use case. The following two patches make it just work for virtual address spaces monitoring. The 4th patch makes 'PG_idle' can be used by DAMON and the 5th patch implements the virtual memory address space specific monitoring primitives using page table Accessed bits and the 'PG_idle' page flag. Now DAMON just works for virtual address space monitoring via the kernel space api. To let the user space users can use DAMON, following four patches add interfaces for them. The 6th patch adds a tracepoint for monitoring results. The 7th patch implements a DAMON application kernel module, namely damon-dbgfs, that simply wraps DAMON and exposes DAMON interface to the user space via the debugfs interface. The 8th patch further exports pid of monitoring thread (kdamond) to user space for easier cpu usage accounting, and the 9th patch makes the debugfs interface to support multiple contexts. Three patches for maintainability follows. The 10th patch adds documentations for both the user space and the kernel space. The 11th patch provides unit tests (based on the kunit) while the 12th patch adds user space tests (based on the kselftest). Finally, the last patch (13th) updates the MAINTAINERS file. This patch (of 13): DAMON is a data access monitoring framework for the Linux kernel. The core mechanisms of DAMON make it - accurate (the monitoring output is useful enough for DRAM level performance-centric memory management; It might be inappropriate for CPU cache levels, though), - light-weight (the monitoring overhead is normally low enough to be applied online), and - scalable (the upper-bound of the overhead is in constant range regardless of the size of target workloads). Using this framework, hence, we can easily write efficient kernel space data access monitoring applications. For example, the kernel's memory management mechanisms can make advanced decisions using this. Experimental data access aware optimization works that incurring high access monitoring overhead could again be implemented on top of this. Due to its simple and flexible interface, providing user space interface would be also easy. Then, user space users who have some special workloads can write personalized applications for better understanding and optimizations of their workloads and systems. === Nevertheless, this commit is defining and implementing only basic access check part without the overhead-accuracy handling core logic. The basic access check is as below. The output of DAMON says what memory regions are how frequently accessed for a given duration. The resolution of the access frequency is controlled by setting ``sampling interval`` and ``aggregation interval``. In detail, DAMON checks access to each page per ``sampling interval`` and aggregates the results. In other words, counts the number of the accesses to each region. After each ``aggregation interval`` passes, DAMON calls callback functions that previously registered by users so that users can read the aggregated results and then clears the results. This can be described in below simple pseudo-code:: init() while monitoring_on: for page in monitoring_target: if accessed(page): nr_accesses[page] += 1 if time() % aggregation_interval == 0: for callback in user_registered_callbacks: callback(monitoring_target, nr_accesses) for page in monitoring_target: nr_accesses[page] = 0 if time() % update_interval == 0: update() sleep(sampling interval) The target regions constructed at the beginning of the monitoring and updated after each ``regions_update_interval``, because the target regions could be dynamically changed (e.g., mmap() or memory hotplug). The monitoring overhead of this mechanism will arbitrarily increase as the size of the target workload grows. The basic monitoring primitives for actual access check and dynamic target regions construction aren't in the core part of DAMON. Instead, it allows users to implement their own primitives that are optimized for their use case and configure DAMON to use those. In other words, users cannot use current version of DAMON without some additional works. Following commits will implement the core mechanisms for the overhead-accuracy control and default primitives implementations. Link: https://lkml.kernel.org/r/20210716081449.22187-1-sj38.park@gmail.com Link: https://lkml.kernel.org/r/20210716081449.22187-2-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Joe Perches <joe@perches.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: David Rientjes <rientjes@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Markus Boehme <markubo@amazon.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-09-08 11:50:24 -07:00
Christoph Hellwig	82a70ce042	mm: move ioremap_page_range to vmalloc.c ... Patch series "small ioremap cleanups". The first patch moves a little code around the vmalloc/ioremap boundary following a bigger move by Nick earlier. The second enforces non-executable mapping on ioremap just like we do for vmap. No driver currently uses executable mappings anyway, as they should. This patch (of 2): This keeps it together with the implementation, and to remove the vmap_range wrapper. Link: https://lkml.kernel.org/r/20210824091259.1324527-1-hch@lst.de Link: https://lkml.kernel.org/r/20210824091259.1324527-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-09-08 11:50:24 -07:00
Mike Rapoport	1507f51255	mm: introduce memfd_secret system call to create "secret" memory areas ... Introduce "memfd_secret" system call with the ability to create memory areas visible only in the context of the owning process and not mapped not only to other processes but in the kernel page tables as well. The secretmem feature is off by default and the user must explicitly enable it at the boot time. Once secretmem is enabled, the user will be able to create a file descriptor using the memfd_secret() system call. The memory areas created by mmap() calls from this file descriptor will be unmapped from the kernel direct map and they will be only mapped in the page table of the processes that have access to the file descriptor. Secretmem is designed to provide the following protections: * Enhanced protection (in conjunction with all the other in-kernel attack prevention systems) against ROP attacks. Seceretmem makes "simple" ROP insufficient to perform exfiltration, which increases the required complexity of the attack. Along with other protections like the kernel stack size limit and address space layout randomization which make finding gadgets is really hard, absence of any in-kernel primitive for accessing secret memory means the one gadget ROP attack can't work. Since the only way to access secret memory is to reconstruct the missing mapping entry, the attacker has to recover the physical page and insert a PTE pointing to it in the kernel and then retrieve the contents. That takes at least three gadgets which is a level of difficulty beyond most standard attacks. * Prevent cross-process secret userspace memory exposures. Once the secret memory is allocated, the user can't accidentally pass it into the kernel to be transmitted somewhere. The secreremem pages cannot be accessed via the direct map and they are disallowed in GUP. * Harden against exploited kernel flaws. In order to access secretmem, a kernel-side attack would need to either walk the page tables and create new ones, or spawn a new privileged uiserspace process to perform secrets exfiltration using ptrace. The file descriptor based memory has several advantages over the "traditional" mm interfaces, such as mlock(), mprotect(), madvise(). File descriptor approach allows explicit and controlled sharing of the memory areas, it allows to seal the operations. Besides, file descriptor based memory paves the way for VMMs to remove the secret memory range from the userspace hipervisor process, for instance QEMU. Andy Lutomirski says: "Getting fd-backed memory into a guest will take some possibly major work in the kernel, but getting vma-backed memory into a guest without mapping it in the host user address space seems much, much worse." memfd_secret() is made a dedicated system call rather than an extension to memfd_create() because it's purpose is to allow the user to create more secure memory mappings rather than to simply allow file based access to the memory. Nowadays a new system call cost is negligible while it is way simpler for userspace to deal with a clear-cut system calls than with a multiplexer or an overloaded syscall. Moreover, the initial implementation of memfd_secret() is completely distinct from memfd_create() so there is no much sense in overloading memfd_create() to begin with. If there will be a need for code sharing between these implementation it can be easily achieved without a need to adjust user visible APIs. The secret memory remains accessible in the process context using uaccess primitives, but it is not exposed to the kernel otherwise; secret memory areas are removed from the direct map and functions in the follow_page()/get_user_page() family will refuse to return a page that belongs to the secret memory area. Once there will be a use case that will require exposing secretmem to the kernel it will be an opt-in request in the system call flags so that user would have to decide what data can be exposed to the kernel. Removing of the pages from the direct map may cause its fragmentation on architectures that use large pages to map the physical memory which affects the system performance. However, the original Kconfig text for CONFIG_DIRECT_GBPAGES said that gigabyte pages in the direct map "... can improve the kernel's performance a tiny bit ..." (commit 00d1c5e057 ("x86: add gbpages switches")) and the recent report [1] showed that "... although 1G mappings are a good default choice, there is no compelling evidence that it must be the only choice". Hence, it is sufficient to have secretmem disabled by default with the ability of a system administrator to enable it at boot time. Pages in the secretmem regions are unevictable and unmovable to avoid accidental exposure of the sensitive data via swap or during page migration. Since the secretmem mappings are locked in memory they cannot exceed RLIMIT_MEMLOCK. Since these mappings are already locked independently from mlock(), an attempt to mlock()/munlock() secretmem range would fail and mlockall()/munlockall() will ignore secretmem mappings. However, unlike mlock()ed memory, secretmem currently behaves more like long-term GUP: secretmem mappings are unmovable mappings directly consumed by user space. With default limits, there is no excessive use of secretmem and it poses no real problem in combination with ZONE_MOVABLE/CMA, but in the future this should be addressed to allow balanced use of large amounts of secretmem along with ZONE_MOVABLE/CMA. A page that was a part of the secret memory area is cleared when it is freed to ensure the data is not exposed to the next user of that page. The following example demonstrates creation of a secret mapping (error handling is omitted): fd = memfd_secret(0); ftruncate(fd, MAP_SIZE); ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); [1] https://lore.kernel.org/linux-mm/213b4567-46ce-f116-9cdf-bbd0c884eb3c@linux.intel.com/ [akpm@linux-foundation.org: suppress Kconfig whine] Link: https://lkml.kernel.org/r/20210518072034.31572-5-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Hagen Paul Pfeifer <hagen@jauu.net> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-07-08 11:48:21 -07:00
Muchun Song	f41f2ed43c	mm: hugetlb: free the vmemmap pages associated with each HugeTLB page ... Every HugeTLB has more than one struct page structure. We __know__ that we only use the first 4 (__NR_USED_SUBPAGE) struct page structures to store metadata associated with each HugeTLB. There are a lot of struct page structures associated with each HugeTLB page. For tail pages, the value of compound_head is the same. So we can reuse first page of tail page structures. We map the virtual addresses of the remaining pages of tail page structures to the first tail page struct, and then free these page frames. Therefore, we need to reserve two pages as vmemmap areas. When we allocate a HugeTLB page from the buddy, we can free some vmemmap pages associated with each HugeTLB page. It is more appropriate to do it in the prep_new_huge_page(). The free_vmemmap_pages_per_hpage(), which indicates how many vmemmap pages associated with a HugeTLB page can be freed, returns zero for now, which means the feature is disabled. We will enable it once all the infrastructure is there. [willy@infradead.org: fix documentation warning] Link: https://lkml.kernel.org/r/20210615200242.1716568-5-willy@infradead.org Link: https://lkml.kernel.org/r/20210510030027.56044-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Chen Huang <chenhuang5@huawei.com> Tested-by: Bodeddula Balasubramaniam <bodeddub@amazon.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-06-30 20:47:25 -07:00
Muchun Song	426e5c429d	mm: memory_hotplug: factor out bootmem core functions to bootmem_info.c ... Patch series "Free some vmemmap pages of HugeTLB page", v23. This patch series will free some vmemmap pages(struct page structures) associated with each HugeTLB page when preallocated to save memory. In order to reduce the difficulty of the first version of code review. In this version, we disable PMD/huge page mapping of vmemmap if this feature was enabled. This acutely eliminates a bunch of the complex code doing page table manipulation. When this patch series is solid, we cam add the code of vmemmap page table manipulation in the future. The struct page structures (page structs) are used to describe a physical page frame. By default, there is an one-to-one mapping from a page frame to it's corresponding page struct. The HugeTLB pages consist of multiple base page size pages and is supported by many architectures. See hugetlbpage.rst in the Documentation directory for more details. On the x86 architecture, HugeTLB pages of size 2MB and 1GB are currently supported. Since the base page size on x86 is 4KB, a 2MB HugeTLB page consists of 512 base pages and a 1GB HugeTLB page consists of 4096 base pages. For each base page, there is a corresponding page struct. Within the HugeTLB subsystem, only the first 4 page structs are used to contain unique information about a HugeTLB page. HUGETLB_CGROUP_MIN_ORDER provides this upper limit. The only 'useful' information in the remaining page structs is the compound_head field, and this field is the same for all tail pages. By removing redundant page structs for HugeTLB pages, memory can returned to the buddy allocator for other uses. When the system boot up, every 2M HugeTLB has 512 struct page structs which size is 8 pages(sizeof(struct page) * 512 / PAGE_SIZE). HugeTLB struct pages(8 pages) page frame(8 pages) +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ | | | 0 | -------------> | 0 | | | +-----------+ +-----------+ | | | 1 | -------------> | 1 | | | +-----------+ +-----------+ | | | 2 | -------------> | 2 | | | +-----------+ +-----------+ | | | 3 | -------------> | 3 | | | +-----------+ +-----------+ | | | 4 | -------------> | 4 | | 2MB | +-----------+ +-----------+ | | | 5 | -------------> | 5 | | | +-----------+ +-----------+ | | | 6 | -------------> | 6 | | | +-----------+ +-----------+ | | | 7 | -------------> | 7 | | | +-----------+ +-----------+ | | | | | | +-----------+ The value of page->compound_head is the same for all tail pages. The first page of page structs (page 0) associated with the HugeTLB page contains the 4 page structs necessary to describe the HugeTLB. The only use of the remaining pages of page structs (page 1 to page 7) is to point to page->compound_head. Therefore, we can remap pages 2 to 7 to page 1. Only 2 pages of page structs will be used for each HugeTLB page. This will allow us to free the remaining 6 pages to the buddy allocator. Here is how things look after remapping. HugeTLB struct pages(8 pages) page frame(8 pages) +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+ | | | 0 | -------------> | 0 | | | +-----------+ +-----------+ | | | 1 | -------------> | 1 | | | +-----------+ +-----------+ | | | 2 | ----------------^ ^ ^ ^ ^ ^ | | +-----------+ | | | | | | | | 3 | ------------------+ | | | | | | +-----------+ | | | | | | | 4 | --------------------+ | | | | 2MB | +-----------+ | | | | | | 5 | ----------------------+ | | | | +-----------+ | | | | | 6 | ------------------------+ | | | +-----------+ | | | | 7 | --------------------------+ | | +-----------+ | | | | | | +-----------+ When a HugeTLB is freed to the buddy system, we should allocate 6 pages for vmemmap pages and restore the previous mapping relationship. Apart from 2MB HugeTLB page, we also have 1GB HugeTLB page. It is similar to the 2MB HugeTLB page. We also can use this approach to free the vmemmap pages. In this case, for the 1GB HugeTLB page, we can save 4094 pages. This is a very substantial gain. On our server, run some SPDK/QEMU applications which will use 1024GB HugeTLB page. With this feature enabled, we can save ~16GB (1G hugepage)/~12GB (2MB hugepage) memory. Because there are vmemmap page tables reconstruction on the freeing/allocating path, it increases some overhead. Here are some overhead analysis. 1) Allocating 10240 2MB HugeTLB pages. a) With this patch series applied: # time echo 10240 > /proc/sys/vm/nr_hugepages real 0m0.166s user 0m0.000s sys 0m0.166s # bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; } kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [8K, 16K) 5476 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [16K, 32K) 4760 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ | [32K, 64K) 4 | | b) Without this patch series: # time echo 10240 > /proc/sys/vm/nr_hugepages real 0m0.067s user 0m0.000s sys 0m0.067s # bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; } kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [4K, 8K) 10147 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [8K, 16K) 93 | | Summarize: this feature is about ~2x slower than before. 2) Freeing 10240 2MB HugeTLB pages. a) With this patch series applied: # time echo 0 > /proc/sys/vm/nr_hugepages real 0m0.213s user 0m0.000s sys 0m0.213s # bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; } kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [8K, 16K) 6 | | [16K, 32K) 10227 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [32K, 64K) 7 | | b) Without this patch series: # time echo 0 > /proc/sys/vm/nr_hugepages real 0m0.081s user 0m0.000s sys 0m0.081s # bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; } kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs - @start[tid]); delete(@start[tid]); }' Attaching 2 probes... @latency: [4K, 8K) 6805 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [8K, 16K) 3427 |@@@@@@@@@@@@@@@@@@@@@@@@@@ | [16K, 32K) 8 | | Summary: The overhead of __free_hugepage is about ~2-3x slower than before. Although the overhead has increased, the overhead is not significant. Like Mike said, "However, remember that the majority of use cases create HugeTLB pages at or shortly after boot time and add them to the pool. So, additional overhead is at pool creation time. There is no change to 'normal run time' operations of getting a page from or returning a page to the pool (think page fault/unmap)". Despite the overhead and in addition to the memory gains from this series. The following data is obtained by Joao Martins. Very thanks to his effort. There's an additional benefit which is page (un)pinners will see an improvement and Joao presumes because there are fewer memmap pages and thus the tail/head pages are staying in cache more often. Out of the box Joao saw (when comparing linux-next against linux-next + this series) with gup_test and pinning a 16G HugeTLB file (with 1G pages): get_user_pages(): ~32k -> ~9k unpin_user_pages(): ~75k -> ~70k Usually any tight loop fetching compound_head(), or reading tail pages data (e.g. compound_head) benefit a lot. There's some unpinning inefficiencies Joao was fixing[2], but with that in added it shows even more: unpin_user_pages(): ~27k -> ~3.8k [1] https://lore.kernel.org/linux-mm/20210409205254.242291-1-mike.kravetz@oracle.com/ [2] https://lore.kernel.org/linux-mm/20210204202500.26474-1-joao.m.martins@oracle.com/ This patch (of 9): Move bootmem info registration common API to individual bootmem_info.c. And we will use {get,put}_page_bootmem() to initialize the page for the vmemmap pages or free the vmemmap pages to buddy in the later patch. So move them out of CONFIG_MEMORY_HOTPLUG_SPARSE. This is just code movement without any functional change. Link: https://lkml.kernel.org/r/20210510030027.56044-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20210510030027.56044-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Chen Huang <chenhuang5@huawei.com> Tested-by: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Mina Almasry <almasrymina@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-06-30 20:47:25 -07:00
Oscar Salvador	e3a9d9fcc3	mm,memory_hotplug: add kernel boot option to enable memmap_on_memory ... Self stored memmap leads to a sparse memory situation which is unsuitable for workloads that requires large contiguous memory chunks, so make this an opt-in which needs to be explicitly enabled. To control this, let memory_hotplug have its own memory space, as suggested by David, so we can add memory_hotplug.memmap_on_memory parameter. Link: https://lkml.kernel.org/r/20210421102701.25051-7-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-05-05 11:27:27 -07:00
Minchan Kim	43ca106fa8	mm: cma: support sysfs ... Since CMA is getting used more widely, it's more important to keep monitoring CMA statistics for system health since it's directly related to user experience. This patch introduces sysfs statistics for CMA, in order to provide some basic monitoring of the CMA allocator. * the number of CMA page successful allocations * the number of CMA page allocation failures These two values allow the user to calcuate the allocation failure rate for each CMA area. e.g.) /sys/kernel/mm/cma/WIFI/alloc_pages_[success|fail] /sys/kernel/mm/cma/SENSOR/alloc_pages_[success|fail] /sys/kernel/mm/cma/BLUETOOTH/alloc_pages_[success|fail] The cma_stat was intentionally allocated by dynamic allocation to harmonize with kobject lifetime management. https://lore.kernel.org/linux-mm/YCOAmXqt6dZkCQYs@kroah.com/ Link: https://lkml.kernel.org/r/20210324230759.2213957-1-minchan@kernel.org Link: https://lore.kernel.org/linux-mm/20210316100433.17665-1-colin.king@canonical.com/ Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: John Dias <joaodias@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-05-05 11:27:24 -07:00
Christoph Hellwig	1fbaf8fc12	mm: add a io_mapping_map_user helper ... Add a helper that calls remap_pfn_range for an struct io_mapping, relying on the pgprot pre-validation done when creating the mapping instead of doing it at runtime. Link: https://lkml.kernel.org/r/20210326055505.1424432-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-04-30 11:20:39 -07:00
Alexander Potapenko	0ce20dd840	mm: add Kernel Electric-Fence infrastructure ... Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7. This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. This series enables KFENCE for the x86 and arm64 architectures, and adds KFENCE hooks to the SLAB and SLUB allocators. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool. At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. The KFENCE memory pool is of fixed size, and if the pool is exhausted no further KFENCE allocations occur. The default config is conservative with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB pages). We have verified by running synthetic benchmarks (sysbench I/O, hackbench) and production server-workload benchmarks that a kernel with KFENCE (using sample intervals 100-500ms) is performance-neutral compared to a non-KFENCE baseline kernel. KFENCE is inspired by GWP-ASan [1], a userspace tool with similar properties. The name "KFENCE" is a homage to the Electric Fence Malloc Debugger [2]. For more details, see Documentation/dev-tools/kfence.rst added in the series -- also viewable here: https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst [1] http://llvm.org/docs/GwpAsan.html [2] https://linux.die.net/man/3/efence This patch (of 9): This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. To detect out-of-bounds writes to memory within the object's page itself, KFENCE also uses pattern-based redzones. The following figure illustrates the page layout: ---+-----------+-----------+-----------+-----------+-----------+--- | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx | | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx | | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x | | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx | | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx | | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx | ---+-----------+-----------+-----------+-----------+-----------+--- Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, a guarded allocation from the KFENCE object pool is returned to the main allocator (SLAB or SLUB). At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. To date, we have verified by running synthetic benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE is performance-neutral compared to the non-KFENCE baseline. For more details, see Documentation/dev-tools/kfence.rst (added later in the series). [elver@google.com: fix parameter description for kfence_object_start()] Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com [elver@google.com: avoid stalling work queue task without allocations] Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com [elver@google.com: fix potential deadlock due to wake_up()] Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com [elver@google.com: add option to use KFENCE without static keys] Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com [elver@google.com: add missing copyright and description headers] Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Joern Engel <joern@purestorage.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2021-02-26 09:41:02 -08:00
Daniel Vetter	eb83b8e3e6	media: videobuf2: Move frame_vector into media subsystem ... It's the only user. This also garbage collects the CONFIG_FRAME_VECTOR symbol from all over the tree (well just one place, somehow omap media driver still had this in its Kconfig, despite not using it). Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-7-daniel.vetter@ffwll.ch	2021-01-12 14:15:31 +01:00
Axel Rasmussen	2b5067a814	mm: mmap_lock: add tracepoints around lock acquisition ... The goal of these tracepoints is to be able to debug lock contention issues. This lock is acquired on most (all?) mmap / munmap / page fault operations, so a multi-threaded process which does a lot of these can experience significant contention. We trace just before we start acquisition, when the acquisition returns (whether it succeeded or not), and when the lock is released (or downgraded). The events are broken out by lock type (read / write). The events are also broken out by memcg path. For container-based workloads, users often think of several processes in a memcg as a single logical "task", so collecting statistics at this level is useful. The end goal is to get latency information. This isn't directly included in the trace events. Instead, users are expected to compute the time between "start locking" and "acquire returned", using e.g. synthetic events or BPF. The benefit we get from this is simpler code. Because we use tracepoint_enabled() to decide whether or not to trace, this patch has effectively no overhead unless tracepoints are enabled at runtime. If tracepoints are enabled, there is a performance impact, but how much depends on exactly what e.g. the BPF program does. [axelrasmussen@google.com: fix use-after-free race and css ref leak in tracepoints] Link: https://lkml.kernel.org/r/20201130233504.3725241-1-axelrasmussen@google.com [axelrasmussen@google.com: v3] Link: https://lkml.kernel.org/r/20201207213358.573750-1-axelrasmussen@google.com [rostedt@goodmis.org: in-depth examples of tracepoint_enabled() usage, and per-cpu-per-context buffer design] Link: https://lkml.kernel.org/r/20201105211739.568279-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-12-15 12:13:41 -08:00
John Hubbard	9c84f22926	mm/gup_benchmark: rename to mm/gup_test ... Patch series "selftests/vm: gup_test, hmm-tests, assorted improvements", v3. Summary: This series provides two main things, and a number of smaller supporting goodies. The two main points are: 1) Add a new sub-test to gup_test, which in turn is a renamed version of gup_benchmark. This sub-test allows nicer testing of dump_pages(), at least on user-space pages. For quite a while, I was doing a quick hack to gup_test.c whenever I wanted to try out changes to dump_page(). Then Matthew Wilcox asked me what I meant when I said "I used my dump_page() unit test", and I realized that it might be nice to check in a polished up version of that. Details about how it works and how to use it are in the commit description for patch #6 ("selftests/vm: gup_test: introduce the dump_pages() sub-test"). 2) Fixes a limitation of hmm-tests: these tests are incredibly useful, but only if people actually build and run them. And it turns out that libhugetlbfs is a little too effective at throwing a wrench in the works, there. So I've added a little configuration check that removes just two of the 21 hmm-tests, if libhugetlbfs is not available. Further details in the commit description of patch #8 ("selftests/vm: hmm-tests: remove the libhugetlbfs dependency"). Other smaller things that this series does: a) Remove code duplication by creating gup_test.h. b) Clear up the sub-test organization, and their invocation within run_vmtests.sh. c) Other minor assorted improvements. [1] v2 is here: https://lore.kernel.org/linux-doc/20200929212747.251804-1-jhubbard@nvidia.com/ [2] https://lore.kernel.org/r/CAHk-=wgh-TMPHLY3jueHX7Y2fWh3D+nMBqVS__AZm6-oorquWA@mail.gmail.com This patch (of 9): Rename nearly every "gup_benchmark" reference and file name to "gup_test". The one exception is for the actual gup benchmark test itself. The current code already does a *little* bit more than benchmarking, and definitely covers more than get_user_pages_fast(). More importantly, however, subsequent patches are about to add some functionality that is non-benchmark related. Closely related changes: * Kconfig: in addition to renaming the options from GUP_BENCHMARK to GUP_TEST, update the help text to reflect that it's no longer a benchmark-only test. Link: https://lkml.kernel.org/r/20201026064021.3545418-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20201026064021.3545418-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-12-15 12:13:38 -08:00
Hui Su	1abbef4f51	mm,kmemleak-test.c: move kmemleak-test.c to samples dir ... kmemleak-test.c is just a kmemleak test module, which also can not be used as a built-in kernel module. Thus, i think it may should not be in mm dir, and move the kmemleak-test.c to samples/kmemleak/kmemleak-test.c. Fix the spelling of built-in by the way. Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Divya Indi <divya.indi@oracle.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: David Howells <dhowells@redhat.com> Link: https://lkml.kernel.org/r/20200925183729.GA172837@rlk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-10-13 18:38:27 -07:00
Mike Rapoport	ab05eabfa1	mm: move lib/ioremap.c to mm/ ... The functionality in lib/ioremap.c deals with pagetables, vmalloc and caches, so it naturally belongs to mm/ Moving it there will also allow declaring p?d_alloc_track functions in an header file inside mm/ rather than having those declarations in include/linux/mm.h Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Link: http://lkml.kernel.org/r/20200627143453.31835-8-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-08-07 11:33:26 -07:00
Linus Torvalds	b791d1bdf9	The Kernel Concurrency Sanitizer (KCSAN) ... KCSAN is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7im98THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoQ3xD/9+q87OmwnyoRTs6O3GDDbWZYoJGolh rctDOAYW8RSS73Fiw23z8hKlLl9tJCya6/X8Q9qoonB1YeIEPPRVj5HJWAMUNEIs YgjlZJFmh+mnbP/KQFctm3AWpoX8kqt3ncqj6zG72oQ9qKui691BY/2NmGVSLxUV DqtUYSKmi51XEQtZuXRuHEf3zBxoyeD43DaSCdJAXd6f5O2X7tmrWDuazHVeKzHV lhijvkyBvGMWvPg0IBrXkkLmeOvS0++MTGm3o+L72XF6nWpzTkcV7N0E9GEDFg45 zwcidRVKD5d/1DoU5Tos96rCJpBEGh/wimlu0z14mcZpNiJgRQH5rzVEO9Y14UcP KL9FgRrb5dFw7yfX2zRQ070OFJ4AEDBMK0o5Lbu/QO5KLkvFkqnuWlQfmmtZJWCW DTRw/FgUgU7lvyPjRrao6HBvwy+yTb0u9K5seCOTRkuepR9nPJs0710pFiBsNCfV RY3cyggNBipAzgBOgLxixnq9+rHt70ton6S8Gijxpvt0dGGfO8k0wuEhFtA4zKrQ 6HGK+pidxnoVdEgyQZhS+qzMMkyiUL0FXdaGJ2IX+/DC+Ij1UrUPjZBn7v25M0hQ ESkvxWKCn7snH4/NJsNxqCV1zyEc3zAW/WvLJUc9I7H8zPwtVvKWPrKEMzrJJ5bA aneySilbRxBFUg== =iplm -----END PGP SIGNATURE----- Merge tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the Kernel Concurrency Sanitizer from Thomas Gleixner: "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support" * tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining compiler.h: Move function attributes to compiler_types.h compiler.h: Avoid nested statement expression in data_race() compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE() kcsan: Update Documentation to change supported compilers kcsan: Remove 'noinline' from __no_kcsan_or_inline kcsan: Pass option tsan-instrument-read-before-write to Clang kcsan: Support distinguishing volatile accesses kcsan: Restrict supported compilers kcsan: Avoid inserting __tsan_func_entry/exit if possible ubsan, kcsan: Don't combine sanitizer with kcov on clang objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn() kcsan: Add __kcsan_{enable,disable}_current() variants checkpatch: Warn about data_race() without comment kcsan: Use GFP_ATOMIC under spin lock Improve KCSAN documentation a bit kcsan: Make reporting aware of KCSAN tests kcsan: Fix function matching in report kcsan: Change data_race() to no longer require marking racing accesses kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h ...	2020-06-11 18:55:43 -07:00
Thomas Gleixner	37d1a04b13	Rebase locking/kcsan to locking/urgent ... Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>	2020-06-11 20:02:46 +02:00
Christoph Hellwig	9bf5b9eb23	kernel: move use_mm/unuse_mm to kthread.c ... Patch series "improve use_mm / unuse_mm", v2. This series improves the use_mm / unuse_mm interface by better documenting the assumptions, and my taking the set_fs manipulations spread over the callers into the core API. This patch (of 3): Use the proper API instead. Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de These helpers are only for use with kernel threads, and I will tie them more into the kthread infrastructure going forward. Also move the prototypes to kthread.h - mmu_context.h was a little weird to start with as it otherwise contains very low-level MM bits. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Felipe Balbi <balbi@kernel.org> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de Link: http://lkml.kernel.org/r/20200416053158.586887-1-hch@lst.de Link: http://lkml.kernel.org/r/20200404094101.672954-5-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-06-10 19:14:18 -07:00
Anshuman Khandual	399145f9eb	mm/debug: add tests validating architecture page table helpers ... This adds tests which will validate architecture page table helpers and other accessors in their compliance with expected generic MM semantics. This will help various architectures in validating changes to existing page table helpers or addition of new ones. This test covers basic page table entry transformations including but not limited to old, young, dirty, clean, write, write protect etc at various level along with populating intermediate entries with next page table page and validating them. Test page table pages are allocated from system memory with required size and alignments. The mapped pfns at page table levels are derived from a real pfn representing a valid kernel text symbol. This test gets called via late_initcall(). This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected. Any architecture, which is willing to subscribe this test will need to select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64, x86, s390 and powerpc platforms where the test is known to build and run successfully Going forward, other architectures too can subscribe the test after fixing any build or runtime problems with their page table helpers. Folks interested in making sure that a given platform's page table helpers conform to expected generic MM semantics should enable the above config which will just trigger this test during boot. Any non conformity here will be reported as an warning which would need to be fixed. This test will help catch any changes to the agreed upon semantics expected from generic MM and enable platforms to accommodate it thereafter. [anshuman.khandual@arm.com: v17] Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com [anshuman.khandual@arm.com: v18] Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32] Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-06-04 19:06:21 -07:00
Ingo Molnar	3b02a051d2	Linux 5.7-rc1 ... -----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y +km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y 3pEsQuE= =whbL -----END PGP SIGNATURE----- Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh Resolve these conflicts: arch/x86/Kconfig arch/x86/kernel/Makefile Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines in the Kconfig to reduce the probability of future conflicts. Signed-off-by: Ingo Molnar <mingo@kernel.org>	2020-04-13 09:44:39 +02:00
Alexander Duyck	36e66c554b	mm: introduce Reported pages ... In order to pave the way for free page reporting in virtualized environments we will need a way to get pages out of the free lists and identify those pages after they have been returned. To accomplish this, this patch adds the concept of a Reported Buddy, which is essentially meant to just be the Uptodate flag used in conjunction with the Buddy page type. To prevent the reported pages from leaking outside of the buddy lists I added a check to clear the PageReported bit in the del_page_from_free_list function. As a result any reported page that is split, merged, or allocated will have the flag cleared prior to the PageBuddy value being cleared. The process for reporting pages is fairly simple. Once we free a page that meets the minimum order for page reporting we will schedule a worker thread to start 2s or more in the future. That worker thread will begin working from the lowest supported page reporting order up to MAX_ORDER - 1 pulling unreported pages from the free list and storing them in the scatterlist. When processing each individual free list it is necessary for the worker thread to release the zone lock when it needs to stop and report the full scatterlist of pages. To reduce the work of the next iteration the worker thread will rotate the free list so that the first unreported page in the free list becomes the first entry in the list. It will then call a reporting function providing information on how many entries are in the scatterlist. Once the function completes it will return the pages to the free area from which they were allocated and start over pulling more pages from the free areas until there are no longer enough pages to report on to keep the worker busy, or we have processed as many pages as were contained in the free area when we started processing the list. The worker thread will work in a round-robin fashion making its way though each zone requesting reporting, and through each reportable free list within that zone. Once all free areas within the zone have been processed it will check to see if there have been any requests for reporting while it was processing. If so it will reschedule the worker thread to start up again in roughly 2s and exit. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224635.29318.19750.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-04-07 10:43:38 -07:00
Qian Cai	5f2d5026be	mm/Makefile: disable KCSAN for kmemleak ... Kmemleak could scan task stacks while plain writes happens to those stack variables which could results in data races. For example, in sys_rt_sigaction and do_sigaction(), it could have plain writes in a 32-byte size. Since the kmemleak does not care about the actual values of a non-pointer and all do_sigaction() call sites only copy to stack variables, just disable KCSAN for kmemleak to avoid annotating anything outside Kmemleak just because Kmemleak scans everything. Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: http://lkml.kernel.org/r/1583263716-25150-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-04-02 09:35:26 -07:00
Ingo Molnar	a4654e9bde	Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts ... Conflicts: arch/x86/purgatory/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>	2020-03-21 09:24:41 +01:00
Steven Price	30d621f672	mm: add generic ptdump ... Add a generic version of page table dumping that architectures can opt-in to. Link: http://lkml.kernel.org/r/20191218162402.45610-20-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-02-04 03:05:25 +00:00
Dmitry Vyukov	43e76af85f	kcov: ignore fault-inject and stacktrace ... Don't instrument 3 more files that contain debugging facilities and produce large amounts of uninteresting coverage for every syscall. The following snippets are sprinkled all over the place in kcov traces in a debugging kernel. We already try to disable instrumentation of stack unwinding code and of most debug facilities. I guess we did not use fault-inject.c at the time, and stacktrace.c was somehow missed (or something has changed in kernel/configs). This change both speeds up kcov (kernel doesn't need to store these PCs, user-space doesn't need to process them) and frees trace buffer capacity for more useful coverage. should_fail lib/fault-inject.c:149 fail_dump lib/fault-inject.c:45 stack_trace_save kernel/stacktrace.c:124 stack_trace_consume_entry kernel/stacktrace.c:86 stack_trace_consume_entry kernel/stacktrace.c:89 ... a hundred frames skipped ... stack_trace_consume_entry kernel/stacktrace.c:93 stack_trace_consume_entry kernel/stacktrace.c:86 Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2020-01-31 10:30:41 -08:00
Ingo Molnar	28336be568	Linux 5.5-rc4 ... -----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4JNtkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGdN0H/3UI6LHOx1ol3/7L TwgMibg2pNxNU05bowDjQt92+Hgj9JM0TeFBsfr5hLaeKBgeVCPr5xK/vH09NlKu otVGbhBLpl9OAUu9znTfbt4bcqhJKlr/K0mS5e1vPsXvZ3wdHS27trwjgyu16/pP NJwkcs5/VRYVC/SrZay2NvheKN+DoGSd4+ZlJprwtAAVMdbEvoaGqRLGKLfLeDMc Z04w8AKhnKIxSkt+eEmuW9+pAQJUAkk4QVjixcJe8q0QpA1XIj965yvE8+XpjbLo eFxupmZq4S2JdCjsa+iBferJ5juR1FVhbHSbZtLsTtkPVegI9ug911WQ+KiCqErI VkiKUl8= =rNsn -----END PGP SIGNATURE----- Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts Conflicts: init/main.c lib/Kconfig.debug Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-12-30 08:10:51 +01:00
Marco Elver	0ebba7141e	build, kcsan: Add KCSAN build exceptions ... This blacklists several compilation units from KCSAN. See the respective inline comments for the reasoning. Signed-off-by: Marco Elver <elver@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>	2019-11-16 07:23:14 -08:00
Thomas Hellstrom	c5acad84cf	mm: Add write-protect and clean utilities for address space ranges ... Add two utilities to 1) write-protect and 2) clean all ptes pointing into a range of an address space. The utilities are intended to aid in tracking dirty pages (either driver-allocated system memory or pci device memory). The write-protect utility should be used in conjunction with page_mkwrite() and pfn_mkwrite() to trigger write page-faults on page accesses. Typically one would want to use this on sparse accesses into large memory regions. The clean utility should be used to utilize hardware dirtying functionality and avoid the overhead of page-faults, typically on large accesses into small memory regions. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Andrew Morton <akpm@linux-foundation.org>	2019-11-06 13:03:36 +01:00
Qian Cai	b57a775f51	mm: silence -Woverride-init/initializer-overrides ... When compiling a kernel with W=1, there are several of those warnings due to arm64 overriding a field on purpose. Just disable those warnings for both GCC and Clang of this file, so it will help dig "gems" hidden in the W=1 warnings by reducing some noises. mm/init-mm.c:39:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] INIT_MM_CONTEXT(init_mm) ^~~~~~~~~~~~~~~~~~~~~~~~ ./arch/arm64/include/asm/mmu.h:133:9: note: expanded from macro 'INIT_MM_CONTEXT' .pgd = init_pg_dir, ^~~~~~~~~~~ mm/init-mm.c:30:10: note: previous initialization is here .pgd = swapper_pg_dir, ^~~~~~~~~~~~~~ Note: there is a side project trying to support explicitly allowing specific initializer overrides in Clang, but there is no guarantee it will happen or not. https://github.com/ClangBuiltLinux/linux/issues/639 Link: http://lkml.kernel.org/r/1566920867-27453-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2019-09-24 15:54:10 -07:00
Nicholas Piggin	13224794cb	mm: remove quicklist page table caches ... Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2019-09-24 15:54:09 -07:00
Christoph Hellwig	14c5cebad5	memremap: move from kernel/ to mm/ ... memremap.c implements MM functionality for ZONE_DEVICE, so it really should be in the mm/ directory, not the kernel/ one. Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2019-08-03 07:02:01 -07:00
Linus Torvalds	fec88ab0af	HMM patches for 5.3 ... Improvements and bug fixes for the hmm interface in the kernel: - Improve clarity, locking and APIs related to the 'hmm mirror' feature merged last cycle. In linux-next we now see AMDGPU and nouveau to be using this API. - Remove old or transitional hmm APIs. These are hold overs from the past with no users, or APIs that existed only to manage cross tree conflicts. There are still a few more of these cleanups that didn't make the merge window cut off. - Improve some core mm APIs: * export alloc_pages_vma() for driver use * refactor into devm_request_free_mem_region() to manage DEVICE_PRIVATE resource reservations * refactor duplicative driver code into the core dev_pagemap struct - Remove hmm wrappers of improved core mm APIs, instead have drivers use the simplified API directly - Remove DEVICE_PUBLIC - Simplify the kconfig flow for the hmm users and core code -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0k1zkACgkQOG33FX4g mxrO+w//QF/yI/9Hh30RWEBq8W107cODkDlaT0Z/7cVEXfGetZzIUpqzxnJofRfQ xTw1XmYkc9WpJe/mTTuFZFewNQwWuMM6X0Xi25fV438/Y64EclevlcJTeD49TIH1 CIMsz8bX7CnCEq5sz+UypLg9LPnaD9L/JLyuSbyjqjms/o+yzqa7ji7p/DSINuhZ Qva9OZL1ZSEDJfNGi8uGpYBqryHoBAonIL12R9sCF5pbJEnHfWrH7C06q7AWOAjQ 4vjN/p3F4L9l/v2IQ26Kn/S0AhmN7n3GT//0K66e2gJPfXa8fxRKGuFn/Kd79EGL YPASn5iu3cM23up1XkbMNtzacL8yiIeTOcMdqw26OaOClojy/9OJduv5AChe6qL/ VUQIAn1zvPsJTyC5U7mhmkrGuTpP6ivHpxtcaUp+Ovvi1cyK40nLCmSNvLnbN5ES bxbb0SjE4uupDG5qU6Yct/hFp6uVMSxMqXZOb9Xy8ZBkbMsJyVOLj71G1/rVIfPU hO1AChX5CRG1eJoMo6oBIpiwmSvcOaPp3dqIOQZvwMOqrO869LR8qv7RXyh/g9gi FAEKnwLl4GK3YtEO4Kt/1YI5DXYjSFUbfgAs0SPsRKS6hK2+RgRk2M/B/5dAX0/d lgOf9WPODPwiSXBYLtJB8qHVDX0DIY8faOyTx6BYIKClUtgbBI8= =wKvp -----END PGP SIGNATURE----- Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull HMM updates from Jason Gunthorpe: "Improvements and bug fixes for the hmm interface in the kernel: - Improve clarity, locking and APIs related to the 'hmm mirror' feature merged last cycle. In linux-next we now see AMDGPU and nouveau to be using this API. - Remove old or transitional hmm APIs. These are hold overs from the past with no users, or APIs that existed only to manage cross tree conflicts. There are still a few more of these cleanups that didn't make the merge window cut off. - Improve some core mm APIs: - export alloc_pages_vma() for driver use - refactor into devm_request_free_mem_region() to manage DEVICE_PRIVATE resource reservations - refactor duplicative driver code into the core dev_pagemap struct - Remove hmm wrappers of improved core mm APIs, instead have drivers use the simplified API directly - Remove DEVICE_PUBLIC - Simplify the kconfig flow for the hmm users and core code" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits) mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR mm: remove the HMM config option mm: sort out the DEVICE_PRIVATE Kconfig mess mm: simplify ZONE_DEVICE page private data mm: remove hmm_devmem_add mm: remove hmm_vma_alloc_locked_page nouveau: use devm_memremap_pages directly nouveau: use alloc_page_vma directly PCI/P2PDMA: use the dev_pagemap internal refcount device-dax: use the dev_pagemap internal refcount memremap: provide an optional internal refcount in struct dev_pagemap memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag memremap: remove the data field in struct dev_pagemap memremap: add a migrate_to_ram method to struct dev_pagemap_ops memremap: lift the devmap_enable manipulation into devm_memremap_pages memremap: pass a struct dev_pagemap to ->kill and ->cleanup memremap: move dev_pagemap callbacks into a separate structure memremap: validate the pagemap type passed to devm_memremap_pages mm: factor out a devm_request_free_mem_region helper mm: export alloc_pages_vma ...	2019-07-14 19:42:11 -07:00
Christoph Hellwig	050a9adc64	mm: consolidate the get_user_pages* implementations ... Always build mm/gup.c so that we don't have to provide separate nommu stubs. Also merge the get_user_pages_fast and __get_user_pages_fast stubs when HAVE_FAST_GUP into the main implementations, which will never call the fast path if HAVE_FAST_GUP is not set. This also ensures the new put_user_pages* helpers are available for nommu, as those are currently missing, which would create a problem as soon as we actually grew users for it. Link: http://lkml.kernel.org/r/20190625143715.1689-13-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2019-07-12 11:05:45 -07:00
Christoph Hellwig	43535b0aef	mm: remove the HMM config option ... All the mm/hmm.c code is better keyed off HMM_MIRROR. Also let nouveau depend on it instead of the mix of a dummy dependency symbol plus the actually selected one. Drop various odd dependencies, as the code is pretty portable. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>	2019-07-02 14:32:45 -03:00
Dan Williams	e900a918b0	mm: shuffle initial free memory to improve memory-side-cache utilization ... Patch series "mm: Randomize free memory", v10. This patch (of 3): Randomization of the page allocator improves the average utilization of a direct-mapped memory-side-cache. Memory side caching is a platform capability that Linux has been previously exposed to in HPC (high-performance computing) environments on specialty platforms. In that instance it was a smaller pool of high-bandwidth-memory relative to higher-capacity / lower-bandwidth DRAM. Now, this capability is going to be found on general purpose server platforms where DRAM is a cache in front of higher latency persistent memory [1]. Robert offered an explanation of the state of the art of Linux interactions with memory-side-caches [2], and I copy it here: It's been a problem in the HPC space: http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/ A kernel module called zonesort is available to try to help: https://software.intel.com/en-us/articles/xeon-phi-software and this abandoned patch series proposed that for the kernel: https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com Dan's patch series doesn't attempt to ensure buffers won't conflict, but also reduces the chance that the buffers will. This will make performance more consistent, albeit slower than "optimal" (which is near impossible to attain in a general-purpose kernel). That's better than forcing users to deploy remedies like: "To eliminate this gradual degradation, we have added a Stream measurement to the Node Health Check that follows each job; nodes are rebooted whenever their measured memory bandwidth falls below 300 GB/s." A replacement for zonesort was merged upstream in commit cc9aec03e5 ("x86/numa_emulation: Introduce uniform split capability"). With this numa_emulation capability, memory can be split into cache sized ("near-memory" sized) numa nodes. A bind operation to such a node, and disabling workloads on other nodes, enables full cache performance. However, once the workload exceeds the cache size then cache conflicts are unavoidable. While HPC environments might be able to tolerate time-scheduling of cache sized workloads, for general purpose server platforms, the oversubscribed cache case will be the common case. The worst case scenario is that a server system owner benchmarks a workload at boot with an un-contended cache only to see that performance degrade over time, even below the average cache performance due to excessive conflicts. Randomization clips the peaks and fills in the valleys of cache utilization to yield steady average performance. Here are some performance impact details of the patches: 1/ An Intel internal synthetic memory bandwidth measurement tool, saw a 3X speedup in a contrived case that tries to force cache conflicts. The contrived cased used the numa_emulation capability to force an instance of the benchmark to be run in two of the near-memory sized numa nodes. If both instances were placed on the same emulated they would fit and cause zero conflicts. While on separate emulated nodes without randomization they underutilized the cache and conflicted unnecessarily due to the in-order allocation per node. 2/ A well known Java server application benchmark was run with a heap size that exceeded cache size by 3X. The cache conflict rate was 8% for the first run and degraded to 21% after page allocator aging. With randomization enabled the rate levelled out at 11%. 3/ A MongoDB workload did not observe measurable difference in cache-conflict rates, but the overall throughput dropped by 7% with randomization in one case. 4/ Mel Gorman ran his suite of performance workloads with randomization enabled on platforms without a memory-side-cache and saw a mix of some improvements and some losses [3]. While there is potentially significant improvement for applications that depend on low latency access across a wide working-set, the performance may be negligible to negative for other workloads. For this reason the shuffle capability defaults to off unless a direct-mapped memory-side-cache is detected. Even then, the page_alloc.shuffle=0 parameter can be specified to disable the randomization on those systems. Outside of memory-side-cache utilization concerns there is potentially security benefit from randomization. Some data exfiltration and return-oriented-programming attacks rely on the ability to infer the location of sensitive data objects. The kernel page allocator, especially early in system boot, has predictable first-in-first out behavior for physical pages. Pages are freed in physical address order when first onlined. Quoting Kees: "While we already have a base-address randomization (CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and memory layouts would certainly be using the predictability of allocation ordering (i.e. for attacks where the base address isn't important: only the relative positions between allocated memory). This is common in lots of heap-style attacks. They try to gain control over ordering by spraying allocations, etc. I'd really like to see this because it gives us something similar to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator." While SLAB_FREELIST_RANDOM reduces the predictability of some local slab caches it leaves vast bulk of memory to be predictably in order allocated. However, it should be noted, the concrete security benefits are hard to quantify, and no known CVE is mitigated by this randomization. Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform a Fisher-Yates shuffle of the page allocator 'free_area' lists when they are initially populated with free memory at boot and at hotplug time. Do this based on either the presence of a page_alloc.shuffle=Y command line parameter, or autodetection of a memory-side-cache (to be added in a follow-on patch). The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e. 10, 4MB this trades off randomization granularity for time spent shuffling. MAX_ORDER-1 was chosen to be minimally invasive to the page allocator while still showing memory-side cache behavior improvements, and the expectation that the security implications of finer granularity randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM. The performance impact of the shuffling appears to be in the noise compared to other memory initialization work. This initial randomization can be undone over time so a follow-on patch is introduced to inject entropy on page free decisions. It is reasonable to ask if the page free entropy is sufficient, but it is not enough due to the in-order initial freeing of pages. At the start of that process putting page1 in front or behind page0 still keeps them close together, page2 is still near page1 and has a high chance of being adjacent. As more pages are added ordering diversity improves, but there is still high page locality for the low address pages and this leads to no significant impact to the cache conflict rate. [1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/ [2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM [3]: https://lkml.org/lkml/2018/10/12/309 [dan.j.williams@intel.com: fix shuffle enable] Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com [cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts] Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Robert Elliott <elliott@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2019-05-14 19:52:48 -07:00
Mike Rapoport	bda49a8116	mm: remove nobootmem ... Move a few remaining functions from nobootmem.c to memblock.c and remove nobootmem Link: http://lkml.kernel.org/r/1536927045-23536-28-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-10-31 08:54:16 -07:00
Mike Rapoport	aca52c3983	mm: remove CONFIG_HAVE_MEMBLOCK ... All architecures use memblock for early memory management. There is no need for the CONFIG_HAVE_MEMBLOCK configuration option. [rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs] Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx [rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal] Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx [rppt@linux.vnet.ibm.com: remove stale #else and the code it protects] Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-10-31 08:54:15 -07:00
Mike Rapoport	b4a991ec58	mm: remove CONFIG_NO_BOOTMEM ... All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any kernel configuration and therefore it can be removed. [alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init] Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-10-31 08:54:14 -07:00
Linus Torvalds	5289851171	arm64 updates for 4.20: ... - Core mmu_gather changes which allow tracking the levels of page-table being cleared together with the arm64 low-level flushing routines - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to mitigate Spectre-v4 dynamically without trapping to EL3 firmware - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4 - Support for Common Not Private (CnP) translations allowing threads of the same CPU to share the TLB entries - Accelerated crc32 routines - Move swapper_pg_dir to the rodata section - Trap WFI instruction executed in user space - ARM erratum 1188874 workaround (arch_timer) - Miscellaneous fixes and clean-ups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlvKGdEACgkQa9axLQDI XvGSQBAAiOH6aQABL4TB7c5KIc7C+Unjm6QCFCoaeGWoHuemnM6cFJ7RQsi0GqnP dVEX5V/FKfmeTWO5g24Ah+MbTm3Bt6+81gywAmi1rrHhmCaCIPjT7xDqy/WsLlvt 7WtgegSGvQ7DIMj2dbfFav6+ra67qAiYZTc46jvuynVl6DrE3BCiyTDbXAWt2nzP Xf3un4AHRbg3UEMUZTLqU5q4z0tbM6rEAZru8O0UOTnD2q7uttUqW3Ab7fpuEkkj lEVrMWD3h8SJg+Df9CbXmCNOjh4VhwBwDb5LgO8vA/AcyV/YLEF5b2OUAk/28qwo 0GBwjqRyI4+YQ9LPg41MhGzrlnta0HCdYoeNLgLQZiDcUkuSfGhoA+MNZNOR8B08 sCWF7F6f8UIQm8KMMBiYYdlVyUYgHLsWE/1+CyeLV0oIoWT5k3c+Xe3pho9KpVb0 Co04TqMlqalry0sbevHz5c55H7iWIjB1Tpo3SxM105dVJVibXRPXkz+WZ5iPO+xa ex2j1kjNdA/AUzrSCZ5lh22zhg0WsfwD++E5meAaJMxieim8FeZDRga43rowJ0BA zMbSNB/+NDFZ9EhC40VaUfKk8Tkgiug9J5swv0+v7hy1QLDyydHhbOecTuIueauM 6taiT2Iuov5yFng1eonYj4htvouVF4WOhPGthFPJMOcrB9mLMhs= =3Mc8 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Apart from some new arm64 features and clean-ups, this also contains the core mmu_gather changes for tracking the levels of the page table being cleared and a minor update to the generic compat_sys_sigaltstack() introducing COMPAT_SIGMINSKSZ. Summary: - Core mmu_gather changes which allow tracking the levels of page-table being cleared together with the arm64 low-level flushing routines - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to mitigate Spectre-v4 dynamically without trapping to EL3 firmware - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4 - Support for Common Not Private (CnP) translations allowing threads of the same CPU to share the TLB entries - Accelerated crc32 routines - Move swapper_pg_dir to the rodata section - Trap WFI instruction executed in user space - ARM erratum 1188874 workaround (arch_timer) - Miscellaneous fixes and clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits) arm64: KVM: Guests can skip __install_bp_hardening_cb()s HYP work arm64: cpufeature: Trap CTR_EL0 access only where it is necessary arm64: cpufeature: Fix handling of CTR_EL0.IDC field arm64: cpufeature: ctr: Fix cpu capability check for late CPUs Documentation/arm64: HugeTLB page implementation arm64: mm: Use __pa_symbol() for set_swapper_pgd() arm64: Add silicon-errata.txt entry for ARM erratum 1188873 Revert "arm64: uaccess: implement unsafe accessors" arm64: mm: Drop the unused cpu parameter MAINTAINERS: fix bad sdei paths arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.c arm64: xen: Use existing helper to check interrupt status arm64: Use daifflag_restore after bp_hardening arm64: daifflags: Use irqflags functions for daifflags arm64: arch_timer: avoid unused function warning arm64: Trap WFI executed in userspace arm64: docs: Document SSBS HWCAP arm64: docs: Fix typos in ELF hwcaps arm64/kprobes: remove an extra semicolon in arch_prepare_kprobe ...	2018-10-22 17:30:06 +01:00
Peter Zijlstra	196d9d8bb7	mm/memory: Move mmu_gather and TLB invalidation code into its own file ... In preparation for maintaining the mmu_gather code as its own entity, move the implementation out of memory.c and into its own file. Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com>	2018-09-07 15:19:25 +01:00
Amir Goldstein	3d8f761531	vfs: implement readahead(2) using POSIX_FADV_WILLNEED ... The implementation of readahead(2) syscall is identical to that of fadvise64(POSIX_FADV_WILLNEED) with a few exceptions: 1. readahead(2) returns -EINVAL for !mapping->a_ops and fadvise64() ignores the request and returns 0. 2. fadvise64() checks for integer overflow corner case 3. fadvise64() calls the optional filesystem fadvise() file operation Unite the two implementations by calling vfs_fadvise() from readahead(2) syscall. Check the !mapping->a_ops in readahead(2) syscall to preserve documented syscall ABI behaviour. Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: d1d04ef857 ("ovl: stack file ops") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>	2018-08-30 20:01:32 +02:00
Mike Kravetz	5d752600a8	mm: restructure memfd code ... With the addition of memfd hugetlbfs support, we now have the situation where memfd depends on TMPFS -or- HUGETLBFS. Previously, memfd was only supported on tmpfs, so it made sense that the code resided in shmem.c. In the current code, memfd is only functional if TMPFS is defined. If HUGETLFS is defined and TMPFS is not defined, then memfd functionality will not be available for hugetlbfs. This does not cause BUGs, just a lack of potentially desired functionality. Code is restructured in the following way: - include/linux/memfd.h is a new file containing memfd specific definitions previously contained in shmem_fs.h. - mm/memfd.c is a new file containing memfd specific code previously contained in shmem.c. - memfd specific code is removed from shmem_fs.h and shmem.c. - A new config option MEMFD_CREATE is added that is defined if TMPFS or HUGETLBFS is defined. No functional changes are made to the code: restructuring only. Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-06-07 17:34:35 -07:00
Randy Dunlap	8e7a0c9100	mm/swap_slots.c: use conditional compilation ... For mm/swap_slots.c, use the traditional Linux method of conditional compilation and linking instead of always compiling it by using #ifdef CONFIG_SWAP and #endif for the entire source file (excluding header files). Link: http://lkml.kernel.org/r/c2a47015-0b5a-d0d9-8bc7-9984c049df20@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-04-05 21:36:24 -07:00
Kirill A. Shutemov	64c349f4ae	mm: add infrastructure for get_user_pages_fast() benchmarking ... Performance of get_user_pages_fast() is critical for some workloads, but it's tricky to test it directly. This patch provides /sys/kernel/debug/gup_benchmark that helps with testing performance of it. See tools/testing/selftests/vm/gup_benchmark.c for userspace counterpart. Link: http://lkml.kernel.org/r/20170908215603.9189-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-11-17 16:10:04 -08:00
Levin, Alexander (Sasha Levin)	4675ff05de	kmemcheck: rip it out ... Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Potapenko <glider@google.com> Cc: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-11-15 18:21:05 -08:00
Greg Kroah-Hartman	b24413180f	License cleanup: add SPDX GPL-2.0 license identifier to files with no license ... Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-11-02 11:10:55 +01:00
Jérôme Glisse	6b368cd4a4	mm/hmm: avoid bloating arch that do not make use of HMM ... This moves all new code including new page migration helper behind kernel Kconfig option so that there is no codee bloat for arch or user that do not want to use HMM or any of its associated features. arm allyesconfig (without all the patchset, then with and this patch): text data bss dec hex filename 83721896 46511131 27582964 157815991 96814b7 ../without/vmlinux 83722364 46511131 27582964 157816459 968168b vmlinux [jglisse@redhat.com: struct hmm is only use by HMM mirror functionality] Link: http://lkml.kernel.org/r/20170825213133.27286-1-jglisse@redhat.com [sfr@canb.auug.org.au: fix build (arm multi_v7_defconfig)] Link: http://lkml.kernel.org/r/20170828181849.323ab81b@canb.auug.org.au Link: http://lkml.kernel.org/r/20170818032858.7447-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-09-08 18:26:46 -07:00
Jérôme Glisse	133ff0eac9	mm/hmm: heterogeneous memory management (HMM for short) ... HMM provides 3 separate types of functionality: - Mirroring: synchronize CPU page table and device page table - Device memory: allocating struct page for device memory - Migration: migrating regular memory to device memory This patch introduces some common helpers and definitions to all of those 3 functionality. Link: http://lkml.kernel.org/r/20170817000548.32038-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Evgeny Baskakov <ebaskakov@nvidia.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com> Signed-off-by: Sherry Cheung <SCheung@nvidia.com> Signed-off-by: Subhash Gutti <sgutti@nvidia.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-09-08 18:26:45 -07:00
Dennis Zhou	30a5b5367e	percpu: expose statistics about percpu memory via debugfs ... There is limited visibility into the use of percpu memory leaving us unable to reason about correctness of parameters and overall use of percpu memory. These counters and statistics aim to help understand basic statistics about percpu memory such as number of allocations over the lifetime, allocation sizes, and fragmentation. New Config: PERCPU_STATS Signed-off-by: Dennis Zhou <dennisz@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org>	2017-06-20 15:31:38 -04:00
Jinbum Park	2959a5f726	mm: add arch-independent testcases for RODATA ... This patch makes arch-independent testcases for RODATA. Both x86 and x86_64 already have testcases for RODATA, But they are arch-specific because using inline assembly directly. And cacheflush.h is not a suitable location for rodata-test related things. Since they were in cacheflush.h, If someone change the state of CONFIG_DEBUG_RODATA_TEST, It cause overhead of kernel build. To solve the above issues, write arch-independent testcases and move it to shared location. [jinb.park7@gmail.com: fix config dependency] Link: http://lkml.kernel.org/r/20170209131625.GA16954@pjb1027-Latitude-E5410 Link: http://lkml.kernel.org/r/20170129105436.GA9303@pjb1027-Latitude-E5410 Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-02-27 18:43:48 -08:00