The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a
custom flag in commit ceeeb99cd8 ("dmaengine: mxs: rename custom flag"),
but i2c-mxs was not updated to use the new flag, completely breaking I2C
transactions using DMA.
Fixes: ceeeb99cd8 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Call netif_tx_disable firstly before starting doing self-test to
avoid sending packet from networking core and self-test packet
simultaneously which may cause self-test failure or hw abnormal.
Fixes: 4aa218a4fe ("hinic: add self test support")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Bugfixes in Microsemi Ocelot switch driver
This is a series of 8 assorted patches for "net", on the drivers for the
VSC7514 MIPS switch (Ocelot-1), the VSC9953 PowerPC (Seville), and a few
more that are common to all supported devices since they are in the
common library portion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mscc_ocelot_init_ports() will skip initializing a port when it
doesn't have a phy-handle, so the ocelot->ports[port] pointer will be
NULL. Take this into consideration when tearing down the driver, and add
a new function ocelot_deinit_port() to the switch library, mirror of
ocelot_init_port(), which needs to be called by the driver for all ports
it has initialized.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver was not unregistering its network interfaces on unbind.
Now it is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mscc_ocelot_probe() is already pretty large and hard to follow. So move
the code for parsing ports in a separate function.
This makes it easier for the next patch to just call
mscc_ocelot_release_ports from the error path of mscc_ocelot_init_ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ocelot_init() allocates memory, resets the switch and polls for a status
register, things which can fail. Stop probing the driver in that case,
and propagate the error result.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not proceed probing if we couldn't allocate memory for the ports
array, just error out.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VSC9953 Seville switch has 2 megabits of buffer split into 4360
words of 60 bytes each.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ocelot_port->ts_id is used to:
(a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
with an skb.
(b) populate the REW_OP from the injection header of the ongoing skb.
Only then is ocelot_port->ts_id incremented.
This is a problem because, at least theoretically, another timestampable
skb might use the same ocelot_port->ts_id before that is incremented.
Normally all transmit calls are serialized by the netdev transmit
spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
called by DSA, which has started declaring the NETIF_F_LLTX feature
since commit 2b86cb8299 ("net: dsa: declare lockless TX feature for
slave ports"). So the logic of using and incrementing the timestamp id
should be atomic per port.
The solution is to use the global ocelot_port->ts_id only while
protected by the associated ocelot_port->ts_id_lock. That's where we
populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
is called for the actual skb, but for felix, it is called for the skb's
clone. That is something which will also be changed in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TX-timestampable skb is added late to the ocelot_port->tx_skbs. It
is in a race with the TX timestamp IRQ, which checks that queue trying
to match the timestamp with the skb by the ts_id. The skb should be
added to the queue before the IRQ can fire.
Fixes: 4e3b0468e6 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The master code needs to being sent when the speed is more than
I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
latest I2C-bus specification and user manual.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The max frequency of mediatek i2c controller driver is
I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ.
Fix it.
Fixes: 90224e6468 ("i2c: drivers: Use generic definitions for bus frequencies")
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
we only fixed the other case - CPUs not affected by the erratum coming
up late).
- Fix branch offset in BPF JIT.
- Defer the stolen time initialisation to the CPU online time from the
CPU starting time to avoid a (sleep-able) memory allocation in an
atomic context.
-----BEGIN PGP SIGNATURE-----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=dCba
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow CPUs affected by erratum 1418040 to come online late
(previously we only fixed the other case - CPUs not affected by the
erratum coming up late).
- Fix branch offset in BPF JIT.
- Defer the stolen time initialisation to the CPU online time from the
CPU starting time to avoid a (sleep-able) memory allocation in an
atomic context.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: paravirt: Initialize steal time when cpu is online
arm64: bpf: Fix branch offset in JIT
arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing crashes.
Fix a long standing bug in our DMA mask handling that was hidden until recently,
and which caused problems with some drivers.
Fix a boot failure on systems with large amounts of RAM, and no hugepage support
and using Radix MMU, only seen in the lab.
A few other minor fixes.
Thanks to:
Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy, Hari Bathini, Ira
Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav Jain, Vaidyanathan
Srinivasan.
-----BEGIN PGP SIGNATURE-----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=cj6B
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
- Add support for the Lakefield chip to the RAPL power capping
driver (Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra).
-----BEGIN PGP SIGNATURE-----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=gBKv
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
Here is a collection of fixes for 5.9. All look small and are
nothing scary. The majority of changes are about ASoC driver-
specific fixes, while there are a couple of ASoC core fixes (DAI
lookup and lockdep stuff) and usual HD-audio quirks.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl9k6X4OHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/9ihAAiTQtzf4s9BkyyiCsH3vrRa7+8qX8N/vMk+8k
vintgqMVwDr1hpkB2ZnpEOkbrcdzFAByOnLU66t42kTiKwjiTdABii8vpVUUpSdw
MwM11+IEor5MaNdNZwt3lfBK0j30AfU3ag5lyPsw8afQpUla/nkk16AIwzOO4u1Q
ajy+vdBz15q8IeR80geSvuTDHvNO4X+3pI381kekEbg/D5U/KlGCYe1q0Ln6RJ5B
pguzNFiyWIKu9w6YdPI7hgGInlA3V0Eltnt7LAI6TfIL32v+gDF5V5UAYGhENsT3
Belc3OP4iQrrYCJ/9mLyhpz4n6urQk/hZBND2I3CLybk/OyCmxZCPCkHq2nk7NaL
dWPs+0xiJnoh60UWGeDiejUNqVgIxRcI0WA+XJA+ELg6zfOU3KDVh3Swm+SlY3c/
OQXjZxw5XzSYvg98cTaA+CYGRO1u4vMM5iPWa0KajQcMGbu+h5ogGZLggfsuNQ6/
0oqBvomkfEPFINupmiJgzkb6MuXSvXxE6WHPyfAD0xT2Dh8u8vrIEmKqABQDJpaJ
8JACBYUCax+Y1OFTvWj8LZ75sXBBiL+ynzetlP9h7zDqYLwU1ZwVAeyS0CPt7E5e
A220weSOzcJNZz4ZM4c0XSN7cvz1MpkVlKTihj4Evx2xXagMgE47/F355SQlt6C4
Y8G85/0=
=VuAQ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes for 5.9. All look small and are nothing
scary.
The majority of changes are about ASoC driver- specific fixes, while
there are a couple of ASoC core fixes (DAI lookup and lockdep stuff)
and usual HD-audio quirks"
* tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek - The Mic on a RedmiBook doesn't work
ASoC: tlv320adcx140: Wake up codec before accessing register
ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure
ALSA: hda: fixup headset for ASUS GX502 laptop
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1
ASoC: Intel: haswell: Fix power transition refactor
ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev
ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions
ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811
ASoC: meson: axg-toddr: fix channel order on g12 platforms
ASoC: soc-core: add snd_soc_find_dai_with_mutex()
ASoC: qcom: common: Fix refcount imbalance on error
ASoC: rt700: Fix return check for devm_regmap_init_sdw()
ASoC: rt715: Fix return check for devm_regmap_init_sdw()
ASoC: rt711: Fix return check for devm_regmap_init_sdw()
ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw()
ASoC: max98373: Fix return check for devm_regmap_init_sdw()
ASoC: ti: fixup ams_delta_mute() function name
ASoC: pcm3168a: ignore 0 Hz settings
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
...
Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.
Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2
Fixes: 970988e19e ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Two fixes for the AMD IOMMU driver:
- Fix a potential NULL-ptr dereference found by smatch
- Fix interrupt remapping when a device is assigned to a guest
and AVIC is enabled.
-----BEGIN PGP SIGNATURE-----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=1jaf
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Two fixes for the AMD IOMMU driver:
- Fix a potential NULL-ptr dereference found by smatch
- Fix interrupt remapping when a device is assigned to a guest and
AVIC is enabled"
* tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode
iommu/amd: Fix potential @entry null deref
Revert patches that caused non volatile Quad Enable bit to be cleared
for certain SPI NOR flashes during module remove or during shutdown, thus
breaking backward compatibility.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAl9jKHIQHHZpZ25lc2hy
QHRpLmNvbQAKCRDERh5FfJEW4xL4B/9OnFkM2TWJFWXi9V4khZcEmKcow4ODcjff
fR5IuHUvHv6Q3pHFqLN5hThcnL7ZCbq1IMOep3vY7E4JHBIxGwN7DNcBf50CQy2U
ts1DD8g7ySZbYFEogebquy98vsiZIMSGR3i1KeGoAy/37ynVe+idXsElJhOd8jtn
roNbFch8NdJZKAs5xMPw9duU723ZouPQ5/bRJiRNTBzVavqjoEpqgVaNwJVq/DvY
zKuSxVMdZ7Uquhn0ZAZExFrBUWCGmeiAlVqvuPknfw/Ij99t6Be/1cJxAqDLj/gX
RIjySOgsYSkXbpJVkjO4hthOTk6sznJ39kXmyWU9sFAxh5ZLdQCQ
=w79N
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD/SPI NOR fixes from Vignesh Raghavendra:
"Revert patches that caused non volatile Quad Enable bit to be cleared
for certain SPI NOR flashes during module remove or during shutdown,
thus breaking backward compatibility"
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
* tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spi-nor: Add capability to disable flash quad mode"
Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()"
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da956795 ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that kvm_vcpu_trap_is_write_fault() checks for S1PTW, there
is no need for kvm_vcpu_dabt_iswrite() to do the same thing, as
we already check for this condition on all existing paths.
Drop the check and add a comment instead.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200915104218.1284701-3-maz@kernel.org
KVM currently assumes that an instruction abort can never be a write.
This is in general true, except when the abort is triggered by
a S1PTW on instruction fetch that tries to update the S1 page tables
(to set AF, for example).
This can happen if the page tables have been paged out and brought
back in without seeing a direct write to them (they are thus marked
read only), and the fault handling code will make the PT executable(!)
instead of writable. The guest gets stuck forever.
In these conditions, the permission fault must be considered as
a write so that the Stage-1 update can take place. This is essentially
the I-side equivalent of the problem fixed by 60e21a0ef5 ("arm64: KVM:
Take S1 walks into account when determining S2 write faults").
Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce
kvm_vcpu_trap_is_exec_fault() that only return true when no faulting
on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to
kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't
specific to data abort.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add synchronize_rcu() after list_del_rcu() in
ftrace_remove_trampoline_from_kallsyms() to protect readers of
ftrace_ops_trampoline_list (in ftrace_get_trampoline_kallsym)
which is used when kallsyms is read.
Link: https://lkml.kernel.org/r/20200901091617.31837-1-adrian.hunter@intel.com
Fixes: fc0ea795f5 ("ftrace: Add symbols for ftrace trampolines")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit fc0ea795f5 ("ftrace: Add symbols for ftrace trampolines")
missed to remove ops from new ftrace_ops_trampoline_list in
ftrace_startup() if ftrace_hash_ipmodify_enable() fails there. It may
lead to BUG if such ops come from a module which may be removed.
Moreover, the trampoline itself is not freed in this case.
Fix it by calling ftrace_trampoline_free() during the rollback.
Link: https://lkml.kernel.org/r/20200831122631.28057-1-mbenes@suse.cz
Fixes: fc0ea795f5 ("ftrace: Add symbols for ftrace trampolines")
Fixes: f8b8be8a31 ("ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict")
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* pm-cpuidle:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
Commit c9b09a9249 ("kconfig: qconf: use delete[] instead of delete
to free array") fixed two lines, but there is one more.
(cppcheck does not report it for some reason...)
This was detected by Clang.
"make HOSTCXX=clang++ xconfig" reports the following:
scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete]
delete data;
^
[]
scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here
char *data = new char[count + 1];
^
Fixes: c4f7398bee ("kconfig: qconf: make debug links work again")
Fixes: c9b09a9249 ("kconfig: qconf: use delete[] instead of delete to free array")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a
STA that only has 80 Mhz support the cf2 field inside the chandef will get
set causing the association to fail when trying to validate the chandef.
Fix this by checking the support flags prior to setting cf2.
Fixes: 57fa5e85d5 ("mac80211: determine chandef from HE 6 GHz operation")
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org
[reword commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet
direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP
selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is
reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects
LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: a11e2f8548 ("lib80211: use crypto API ccm(aes) transform for CCMP processing")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When converting from struct ieee80211_tx_rate to ieee80211_rx_status,
there was one check missing to fill in the bandwidth for 160 MHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not
microseconds. Adjust the duration checks to account for that.
For higher data rates, allow larger estimated aggregation sizes, and add some
values for HE as well, which can use much larger aggregates.
Since small packets with high data rates can now lead to duration values too
small for info->tx_time_est, return a minimum of 4us.
Fixes: f01cfbaf9b ("mac80211: improve AQL aggregation estimation for low data rates")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f341 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
Fixes: e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit 26e495f341 ("iommu/amd: Restore IRTE.RemapEn bit after
programming IRTE"), smatch warns:
drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode()
warn: variable dereferenced before check 'entry' (see line 3867)
Fix this by moving the @valid assignment to after @entry has been checked
for NULL.
Fixes: 26e495f341 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There have been some reports of "bad bp value" warnings printed by the
frame pointer unwinder:
WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb ("x86/entry/64: Move non entry code into .text section")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
Pull percpu fix from Dennis Zhou:
"This is a fix for the first chunk size calculation where the variable
length array incorrectly used the number of longs instead of bytes of
longs.
This came in as a code fix and not a bug report, so I don't think it
was widely problematic. I believe it worked out due to it being
memblock memory and alignment requirements working in our favor"
* 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: fix first chunk size calculation for populated bitmap
struct ethtool_fecparam carries bitmasks not bit numbers.
We want to return 1 (NONE), not 0.
Fixes: 0d08709383 ("nfp: implement ethtool FEC mode settings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
amdgpu:
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
amdkfd:
- Fix a GPU reset crash
- Fix a memory leak
radeon:
- Revert a PLL fix that broke other boards
i915:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
mediatek:
- Fix scrolling of panel
- Remove duplicated include
- Use CPU when fail to get cmdq event
- Add missing put_device() call
-----BEGIN PGP SIGNATURE-----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=1CO8
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A bunch of small fixes, some of the i915 ones have been out for a
while and got better commit msg explaining some better reasoning
behind them (hopefully this trend continues).
Otherwise there a few AMD related ones mostly small, one radeon PLL
regression fix and a bunch of small mediatek fixes.
amdgpu:
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
amdkfd:
- Fix a GPU reset crash
- Fix a memory leak
radeon:
- Revert a PLL fix that broke other boards
i915:
- Avoid exposing a partially constructed context
- Use RCU instead of mutex for context termination list iteration
- Avoid data race reported by KCSAN
- Filter wake_flags passed to default_wake_function
mediatek:
- Fix scrolling of panel
- Remove duplicated include
- Use CPU when fail to get cmdq event
- Add missing put_device() call"
* tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amd/display: Don't log hdcp module warnings in dmesg
drm/amdgpu: declare ta firmware for navy_flounder
drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()
drm/mediatek: Add missing put_device() call in mtk_drm_kms_init()
drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail
drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init()
drm/mediatek: Use CPU when fail to get cmdq event
drm/mediatek: Remove duplicated include
drm/i915: Filter wake_flags passed to default_wake_function
drm/i915: Be wary of data races when reading the active execlists
drm/i915/gem: Reduce context termination list iteration guard to RCU
drm/i915/gem: Delay tracking the GEM context until it is registered
drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is
drm/radeon: revert "Prefer lower feedback dividers"
drm/amdgpu: Include sienna_cichlid in USBC PD FW support.
drm/amd/display: update nv1x stutter latencies
drm/amd/display: Don't use DRM_ERROR() for DTM add topology
drm/amd/pm: support runtime pptable update for sienna_cichlid etc.
drm/amdkfd: fix a memory leak issue
drm/kfd: fix a system crash issue during GPU recovery
...
In rx_request_irq(), it will just return what irq_set_affinity_hint()
returns. If it is failed, the napi and irq requested are not freed
properly. So add exits for failures to handle these.
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: phy: Unbind fixes
This patch series fixes a couple of issues with the unbinding of the PHY
drivers and then bringing down a network interface. The first is a NULL
pointer de-reference and the second was an incorrect warning being
triggered.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When phy_is_started() was added to catch incorrect PHY states,
phy_stop() would not be qualified against PHY_DOWN. It is possible to
reach that state when the PHY driver has been unbound and the network
device is then brought down.
Fixes: 2b3e88ea65 ("net: phy: improve phy state checking")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
