OpenBSD netcat (Debian patchlevel 1.195-2) does not seem to react to
SIGINT for whatever reason, causing prefix.pl to hang after
test_lwt_seg6local.sh exits due to netcat inheriting
test_lwt_seg6local.sh's file descriptors.
Fix by using SIGTERM instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720101810.84299-1-iii@linux.ibm.com
When running out of srctree, relative path to lib/test_bpf.ko is
different than when running in srctree. Check $building_out_of_srctree
environment variable and use a different relative path if needed.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717165326.6786-2-iii@linux.ibm.com
ISA v3.1 does not support the SAO storage control attribute required to
implement PROT_SAO. PROT_SAO was used by specialised system software
(Lx86) that has been discontinued for about 7 years, and is not thought
to be used elsewhere, so removal should not cause problems.
We rather remove it than keep support for older processors, because
live migrating guest partitions to newer processors may not be possible
if SAO is in use (or worse allowed with silent races).
- PROT_SAO stays in the uapi header so code using it would still build.
- arch_validate_prot() is removed, the generic version rejects PROT_SAO
so applications would get a failure at mmap() time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop KVM change for the time being]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200703011958.1166620-3-npiggin@gmail.com
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
With commit 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation
must not change pkey registers") we are not updating UAMOR on key
allocation. So don't update the expected uamor value in the test.
Fixes: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-23-aneesh.kumar@linux.ibm.com
Add tdc to existing kselftest infrastructure so that it can be run with
existing kselftests. TDC now generates objects in objdir/kselftest
without cluttering main objdir, leaves source directory clean, and
installs correctly in kselftest_install, properly adding itself to
run_kselftest.sh script.
Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run
tdc.py targets with correct arguments. To support single target from
selftest/Makefile, combine tc-testing/bpf/Makefile and
tc-testing/Makefile. Move action.c up a directory to tc-testing/.
Tested with:
make O=/tmp/{objdir} TARGETS="tc-testing" kselftest
cd /tmp/{objdir}
cd kselftest
cd tc-testing
./tdc.sh
make -C tools/testing/selftests/ TARGETS=tc-testing run_tests
make TARGETS="tc-testing" kselftest
cd tools/testing/selftests
./kselftest_install.sh /tmp/exampledir
My VM doesn't run all the kselftests so I commented out all except my
target and net/pmtu.sh then:
cd /tmp/exampledir && ./run_kselftest.sh
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the example program for PTP ancillary functionality with the
ability to configure not only the periodic output's period (frequency),
but also the phase and duty cycle (pulse width) which were newly
introduced.
The ioctl level also needs to be updated to the new PTP_PEROUT_REQUEST2,
since the original PTP_PEROUT_REQUEST doesn't support this
functionality. For an in-tree testing program, not having explicit
backwards compatibility is fine, as it should always be tested with the
current kernel headers and sources.
Tested with an oscilloscope on the felix switch PHC:
echo '2 0' > /sys/class/ptp/ptp1/pins/switch_1588_dat0
./testptp -d /dev/ptp1 -p 1000000000 -w 100000000 -H 1000 -i 0
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 'perout' holds the nanosecond value of the signal's period, it
should be a 64-bit value. Current assumption is that it cannot be larger
than 1 second.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a test that changes its UID, uses capabilities to
get CAP_CHECKPOINT_RESTORE and uses clone3() with set_tid to
create a process with a given PID as non-root.
Signed-off-by: Adrian Reber <areber@redhat.com>
Link: https://lore.kernel.org/r/20200719100418.2112740-8-areber@redhat.com
[christian.brauner@ubuntu.com: use TH_LOG() instead of ksft_print_msg()]
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
A fix to the VAS code we merged this cycle, to report the proper error code to
userspace for address translation failures. And a selftest update to match.
Another fix for our pkey handling of PROT_EXEC mappings.
A fix for a crash when booting a "secure VM" under an ultravisor with certain
numbers of CPUs.
Thanks to:
Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh
Rajendran, Thiago Jung Bauermann.
-----BEGIN PGP SIGNATURE-----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=eEXz
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
Commit 01397e822a ("kunit: Fix TabError, remove defconfig code and
handle when there is no kunitconfig") and commit 45ba7a893a ("kunit:
kunit_tool: Separate out config/build/exec/parse") introduced two
closely related issues which built off of each other: they excessively
created the build directory when not present and modified a constant
(constants in Python only exist by convention).
Together these issues broken a number of unit tests for KUnit tool, so
fix them.
Fixed up commit log to fic checkpatch commit description style error.
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 01397e822a ("kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig")
Fixes: 45ba7a893a ("kunit: kunit_tool: Separate out config/build/exec/parse")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit ddbd60c779 ("kunit: use --build_dir=.kunit as default") changed
the default build directory for KUnit tests, but failed to update
associated unit tests for kunit_tool, so update them.
Fixes: ddbd60c779 ("kunit: use --build_dir=.kunit as default")
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Direct stderr to subprocess.STDOUT so error messages get included in the
subprocess.CalledProcessError exceptions output field. This results in
more meaningful error messages for the user.
This is already being done in the make_allyesconfig method. Do the same
for make_mrproper, make_olddefconfig, and make methods.
With this, failures on unclean trees [1] will give users an error
message that includes:
"The source tree is not clean, please run 'make ARCH=um mrproper'"
[1] https://bugzilla.kernel.org/show_bug.cgi?id=205219
Signed-off-by: Will Chen <chenwi@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When the selftest "step" counter grew beyond 255, non-fatal warnings
were being emitted, which is noisy and pointless. There are selftests
with more than 255 steps (especially those in loops, etc). Instead,
just cap "steps" to 254 and do not report the saturation.
Reported-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Fixes: 9847d24af9 ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Will Deacon <will@kernel.org>
Cc: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 74bc7c97fa ("kselftest: add fixture variants")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Andrii reported that sockopt_inherit occasionally hangs up on 5.5 kernel [0].
This can happen if server_thread runs faster than the main thread.
In that case, pthread_cond_wait will wait forever because
pthread_cond_signal was executed before the main thread was blocking.
Let's move pthread_mutex_lock up a bit to make sure server_thread
runs strictly after the main thread goes to sleep.
(Not sure why this is 5.5 specific, maybe scheduling is less
deterministic? But I was able to confirm that it does indeed
happen in a VM.)
[0] https://lore.kernel.org/bpf/CAEf4BzY0-bVNHmCkMFPgObs=isUAyg-dFzGDY7QWYkmm7rmTSg@mail.gmail.com/
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200715224107.3591967-1-sdf@google.com
Similar to what have been done for DEVMAP, introduce tests to verify
ability to add a XDP program to an entry in a CPUMAP.
Verify CPUMAP programs can not be attached to devices as a normal
XDP program, and only programs with BPF_XDP_CPUMAP attach type can
be loaded in a CPUMAP.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/9c632fcea5382ea7b4578bd06b6eddf382c3550b.1594734381.git.lorenzo@kernel.org
Test that policers shared by different tc filters are correctly
reference counted by observing policers' occupancy via devlink-resource.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Query the maximum number of supported policers using devlink-resource
and test that this number can be reached by configuring tc filters with
police action. Test that an error is returned in case the maximum number
is exceeded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that upper and lower limits on rate and burst size imposed by the
device are rejected by the kernel.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tc-police action in various scenarios such as Rx policing, Tx
policing, shared policer and police piped to mirred. The test passes
with both veth pairs and loopbacked ports.
# ./tc_police.sh
TEST: police on rx [ OK ]
TEST: police on tx [ OK ]
TEST: police with shared policer - rx [ OK ]
TEST: police with shared policer - tx [ OK ]
TEST: police rx and mirror [ OK ]
TEST: police tx and mirror [ OK ]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling
and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper
error code should be reported by OS when NX encounters address
translation failure.
This patch uses CC=250 to determine the fault address when the request
is not successful.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
With procfs v3.3.16, the sysctl command doesn't print the set key and
value on error. This change breaks livepatch selftest test-ftrace.sh,
that tests the interaction of sysctl ftrace_enabled:
Make it work with all sysctl versions using '-q' option.
Explicitly print the final status on success so that it can be verified
in the log. The error message is enough on failure.
Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200714091030.1611-1-pmladek@suse.com
Test whether we can add file descriptors in response to notifications.
This injects the file descriptors via notifications, and then uses kcmp
to determine whether or not it has been successful.
It also includes some basic sanity checking for arguments.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Palmer <palmer@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Robert Sesek <rsesek@google.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Matt Denton <mpdenton@google.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200603011044.7972-5-sargun@sargun.me
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
During setup():
...
for ns in h0 r1 h1 h2 h3
do
create_ns ${ns}
done
...
while in cleanup():
...
for n in h1 r1 h2 h3 h4
do
ip netns del ${n} 2>/dev/null
done
...
and after removing the stderr redirection in cleanup():
$ sudo ./fib_nexthop_multiprefix.sh
...
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Cannot remove namespace file "/run/netns/h4": No such file or directory
$ echo $?
1
and a non-zero return code, make kselftests fail (even if the test
itself is fine):
...
not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1
...
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BusyBox diff doesn't support the GNU diff '--LTYPE-line-format' options
that were used in the selftests to filter older kernel log messages from
dmesg output.
Use "comm" which is more available in smaller boot environments.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710183745.19730-1-joe.lawrence@redhat.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest for offloading a mirror action attached to the block
associated with RED early_drop qevent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reliably remove all the type modifiers from read-only (.rodata) global
variable definitions, including cases of inner field const modifiers and
arrays of const values.
Also modify one of selftests to ensure that const volatile struct doesn't
prevent user-space from modifying .rodata variable.
Fixes: 985ead416d ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200713232409.3062144-3-andriin@fb.com
Adding resolve_btfids test under test_progs suite.
It's possible to use btf_ids.h header and its logic in
user space application, so we can add easy test for it.
The test defines BTF_ID_LIST and checks it gets properly
resolved.
For this reason the test_progs binary (and other binaries
that use TRUNNER* macros) is processed with resolve_btfids
tool, which resolves BTF IDs in .BTF_ids section. The BTF
data are taken from btf_data.o object rceated from
progs/btf_data.c.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-10-jolsa@kernel.org
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
Since the BPF_PROG_TYPE_CGROUP_SOCKOPT verifier test does not set an
attach type, bpf_prog_load_check_attach() disallows loading the program
and the test is always skipped:
#434/p perfevent for cgroup sockopt SKIP (unsupported program type 25)
Fix the issue by setting a valid attach type.
Fixes: 0456ea170c ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200710150439.126627-1-jean-philippe@linaro.org
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Keno Fischer <keno@juliacomputing.com>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: 74bc7c97fa ("kselftest: add fixture variants")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
The user_trap_syscall() helper creates a filter with
SECCOMP_RET_USER_NOTIF. To avoid confusion with SECCOMP_RET_TRAP, rename
the helper to user_notif_syscall().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp tests are a bit noisy without CONFIG_CHECKPOINT_RESTORE (due
to missing the kcmp() syscall). The seccomp tests are more accurate with
kcmp(), but it's not strictly required. Refactor the tests to use
alternatives (comparing fd numbers), and provide a central test for
kcmp() so there is a single SKIP instead of many. Continue to produce
warnings for the other tests, though.
Additionally adds some more bad flag EINVAL tests to the addfd selftest.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp benchmark calibration loop did not need to take so long.
Instead, use a simple 1 second timeout and multiply up to target. It
does not need to be accurate.
Signed-off-by: Kees Cook <keescook@chromium.org>
As seccomp_benchmark tries to calibrate how many samples will take more
than 5 seconds to execute, it may end up picking up a number of samples
that take 10 (but up to 12) seconds. As the calibration will take double
that time, it takes around 20 seconds. Then, it executes the whole thing
again, and then once more, with some added overhead. So, the thing might
take more than 40 seconds, which is too close to the 45s timeout.
That is very dependent on the system where it's executed, so may not be
observed always, but it has been observed on x86 VMs. Using a 90s timeout
seems safe enough.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/r/20200601123202.1183526-1-cascardo@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
It's useful to see how much (at a minimum) each filter adds to the
syscall overhead. Add additional calculations.
Signed-off-by: Kees Cook <keescook@chromium.org>
The TSYNC ESRCH flag test will fail for regular users because NNP was
not set yet. Add NNP setting.
Fixes: 51891498f2 ("seccomp: allow TSYNC and USER_NOTIF together")
Cc: stable@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Running the seccomp tests as a regular user shouldn't just fail tests
that require CAP_SYS_ADMIN (for getting a PID namespace). Instead,
detect those cases and SKIP them. Additionally, gracefully SKIP missing
CONFIG_USER_NS (and add to "config" since we'd prefer to actually test
this case).
Signed-off-by: Kees Cook <keescook@chromium.org>
The kselftests will be renaming XFAIL to SKIP in the test harness, and
to avoid painful conflicts, rename XFAIL to SKIP now in a future-proofed
way.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add validating the UDP tunnel infra works.
$ ./udp_tunnel_nic.sh
PASSED all 383 checks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kselftest fixes update for Linux 5.8-rc5 consists of tmp2 test
changes to run on python3 and kselftest framework fix to incorrect
return type.
-----BEGIN PGP SIGNATURE-----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=pKoZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"TPM2 test changes to run on python3 and kselftest framework fix to
incorrect return type"
* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: ksft_test_num return type should be unsigned
selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test port split configuration using previously added number of port lanes
attribute.
Check that all the splittable ports are successfully split to their maximum
number of lanes and below, and that those which are not splittable fail to
be split.
Test output example:
TEST: swp4 is unsplittable [ OK ]
TEST: split port swp53 into 4 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
TEST: split port swp53 into 2 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks against
file->f_cred for modules, kprobes, and bpf.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl8GUbMWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohnD/9VsPsAMV+8lhsPvkcuW/DkTcAY
qUEzsXU3v06gJ0Z/1lBKtisJ6XmD93wWcZCTFvJ0S8vR3yLZvOVfToVjCMO32Trc
4ZkWTPwpvfeLug6T6CcI2ukQdZ/opI1cSabqGl79arSBgE/tsghwrHuJ8Exkz4uq
0b7i8nZa+RiTezwx4EVeGcg6Dv1tG5UTG2VQvD/+QGGKneBlrlaKlI885N/6jsHa
KxvB7+8ES1pnfGYZenx+RxMdljNrtyptbQEU8gyvoV5YR7635gjZsVsPwWANJo+4
EGcFFpwWOAcVQaC3dareLTM8nVngU6Wl3Rd7JjZtjvtZba8DdCn669R34zDGXbiP
+1n1dYYMSMBeqVUbAQfQyLD0pqMIHdwQj2TN8thSGccr2o3gNk6AXgYq0aYm8IBf
xDCvAansJw9WqmxErIIsD4BFkMqF7MjH3eYZxwCPWSrKGDvKxQSPV5FarnpDC9U7
dYCWVxNPmtn+unC/53yXjEcBepKaYgNR7j5G7uOfkHvU43Bd5demzLiVJ10D8abJ
ezyErxxEqX2Gr7JR2fWv7iBbULJViqcAnYjdl0y0NgK/hftt98iuge6cZmt1z6ai
24vI3X4VhvvVN5/f64cFDAdYtMRUtOo2dmxdXMid1NI07Mj2qFU1MUwb8RHHlxbK
8UegV2zcrBghnVuMkw==
=ib5Q
-----END PGP SIGNATURE-----
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
basic functional test, triggering the msk diag interface
code. Require appropriate iproute2 support, skip elsewhere.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Switch perf_buffer test to use skeleton to avoid use of bpf_prog_load() and
make test a bit more succinct. Also switch BPF program to use tracepoint
instead of kprobe, as that allows to support older kernels, which had
tracepoint support before kprobe support in the form that libbpf expects
(i.e., libbpf expects /sys/bus/event_source/devices/kprobe/type, which doesn't
always exist on old kernels).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-7-andriin@fb.com
Add a test that relies on CO-RE, but doesn't expect any of the recent
features, not available on old kernels. This is useful for Travis CI tests
running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to
verify that CO-RE still works, even if kernel itself doesn't support BTF yet,
as long as there is .BTF embedded into vmlinux image by pahole. Given most of
CO-RE doesn't require any kernel awareness of BTF, it is a useful test to
validate that libbpf's BTF sanitization is working well even with ancient
kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-5-andriin@fb.com
There are a number of places in test_progs that use minus-1 as the argument
to exit(). This is confusing as a process exit status is masked to be a
number between 0 and 255 as defined in man exit(3). Thus, users will see
status 255 instead of minus-1.
This patch use positive exit code 3 instead of minus-1. These cases are put
in the same group of infrastructure setup errors.
Fixes: fd27b1835e ("selftests/bpf: Reset process and thread affinity after each test/sub-test")
Fixes: 811d7e375d ("bpf: selftests: Restore netns after each test")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
This is a follow up adjustment to commit 6c92bd5cd4 ("selftests/bpf:
Test_progs indicate to shell on non-actions"), that returns shell exit
indication EXIT_FAILURE (value 1) when user selects a non-existing test.
The problem with using EXIT_FAILURE is that a shell script cannot tell
the difference between a non-existing test and the test failing.
This patch uses value 2 as shell exit indication.
(Aside note unrecognized option parameters use value 64).
Fixes: 6c92bd5cd4 ("selftests/bpf: Test_progs indicate to shell on non-actions")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Now that pidfds support CLONE_NEWTIME as well enable testing them in the
setns() testuite.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20200706154912.3248030-5-christian.brauner@ubuntu.com
samples/bpf no longer use bpf_map_def_legacy and instead use the
libbpf's bpf_map_def or new BTF-defined MAP format. This commit removes
unused bpf_map_def_legacy struct from selftests/bpf/bpf_legacy.h.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200707184855.30968-5-danieltimlee@gmail.com
Simple test that enforces a single SOCK_DGRAM socket per cgroup.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-5-sdf@google.com
The check if there are any files to install in case of no files
compares "X " with "X" so never false.
Remove extra spaces. It may make sense to use make's $(if) function
here.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Using one shell for the whole recipe with long lists can cause
make[1]: execvp: /bin/sh: Argument list too long
with some shells. Triggered by commit 309b81f0fd ("selftests/bpf:
Install generated test progs")
It requires to change the rule which rely on the one shell
behaviour (run_tests).
Simplify also INSTALL_SINGLE_RULE, remove extra echo, required to
workaround .ONESHELL.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to how ENOSYS causes a skip if pidfd_send_signal is not present,
we can do the same for unshare if it fails with EPERM. This way, running
the test without privileges causes four tests to skip but no early bail out.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip instead.
The plan passed to ksft_set_plan was wrong, too, so fix it while at it.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use a share memory segment to pass string information between forked
test and the test runner for the skip reason.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since forever the harness output for signed value tests have reported
unsigned values to avoid casting. Instead, actually test the variable
types and perform the correct casts and choose the correct format
specifiers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Using the kselftest_harness.h would result in non-TAP test reporting,
which didn't make much sense given that all the requirements for using
the low-level API were met. Switch to using ksft_*() helpers while
retaining as much of a human-readability as possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add "how to use this API" documentation to kselftest.h, and include some
addition helpers and notes to make things easier to use.
Additionally removes the incorrect "Bail out!" line from the standard exit
path. The TAP13 specification says that "Bail out!" should be used when
giving up before all tests have been run. For a "normal" execution run,
the selftests should not report "Bail out!".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The binderfs test mixed the full harness API and the selftest API.
Adjust to use only the harness API so that the harness API can switch
to using the selftest API internally in future patches.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove unused includes of the kselftest.h header.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Selftest output reporting was happening before the TAP headers and plan
had been emitted. Move the first test reports later.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Move it before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip when possible, or just bail out if
memory corruption is detected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip for the individual tests.
The call in suspend() is fine, but ksft_set_plan should be after it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The computation of the test plan uses the available_cpus bitset
before calling sched_getaffinity to fill it in. The resulting
plan is bogus, fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to the TAP specification, a skipped test must be marked as "ok"
and annotated with the SKIP directive, for example
ok 23 # skip Insufficient flogiston pressure.
(https://testanything.org/tap-specification.html)
Fix the kselftest infrastructure to match this.
For ksft_exit_skip, it is preferrable to emit a dummy plan line that
indicates the whole test was skipped, but this is not always possible
because of ksft_exit_skip being used as a "shortcut" by the tests.
In that case, print the test counts and a normal "ok" line. The format
is now the same independent of whether msg is NULL or not (but it is
never NULL in any caller right now).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes a compiler warning:
In file included from sync_test.c:37:
../kselftest.h: In function ‘ksft_print_cnts’:
../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
if (ksft_plan != ksft_test_num())
^~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Python 2 is no longer supported by the Python upstream project, so
upgrade TPM2 tests to Python 3.
Fixed minor merge conflicts
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When investigating performance issues that involve latency / loss /
reordering it is useful to have the pcap from the sender-side as it
allows to easier infer the state of the sender's congestion-control,
loss-recovery, etc.
Allow the selftests to capture a pcap on both sender and receiver so
that this information is not lost when reproducing.
This patch also improves the file names. Instead of:
ns4-5ee79a56-X4O6gS-ns3-5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap
We now have something like for the same test:
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap
It was a connection from ns3 to ns4, better to start with ns3 then. The
port is also added, easier to find the trace we want.
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space
value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not support
it crash even when the MSR is written to 0 which is the default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN PV
does not implement ESPFIX64
-----BEGIN PGP SIGNATURE-----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=lI9c
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
space value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not
support it crash even when the MSR is written to 0 which is the
default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come
back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN
PV does not implement ESPFIX64"
* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
selftests/x86: Consolidate and fix get/set_eflags() helpers
selftests/x86/syscall_nt: Clear weird flags after each test
selftests/x86/syscall_nt: Add more flag combinations
x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
x86/entry: Assert that syscalls are on the right stack
x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
Before, clang version 9 threw errors such as: error:
use of GNU old-style field designator extension [-Werror,-Wgnu-designator]
{ tstamp: true, swtstamp: true }
^~~~~~~
.tstamp =
Fix these warnings in tools/testing/selftests/net in the same manner as
commit 121e357ac7 ("selftests/harness: Update named initializer syntax").
N.B. rxtimestamp.c is the only affected file in the directory.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the options --ipv4, --ipv6 to specify running over ipv4 and/or
ipv6. If neither is specified, then run both.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF selftests show a compilation error as follows:
libbpf: invalid relo for 'entries' in special section 0xfff2; forgot to
initialize global var?..
Fix it by initializing 'entries' to zeros.
Fixes: c7568114bc ("selftests/bpf: Add bpf_iter test with bpf_get_task_stack()")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200703181719.3747072-1-songliubraving@fb.com
This kselftest fixes update for Linux 5.8-rc4 consists of tpm test
fixes from arkko Sakkinen.
-----BEGIN PGP SIGNATURE-----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=RDv/
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build
and run-times failures. Also includes troubleshooting tips updates
to kunit user documentation.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl7985cACgkQCwJExA0N
QxxFvhAA6Wa+1UMR4VKLZgfc2dL85LeV9tZO714ssIt1rxcgv2dHswsE0nbJmHyM
DsfEufqOsvpX7/ic/JqrwIl+iDGrKlV9wo+ZLl+tdt5jVeB6OP6Dr5C3jvD3eZhX
zUHxr04QGzQuJnS6gAOIrCa/qBz17duAEij6xj4if/6OAkL2Igb3PGFzhpjVKqJL
TLY5UJ80D+QHJ7o8FWsaB8bNDMu7gmOBgfMb1qGB60cFppE+regoQRtkZefLap26
MixOFgRD5DyNoGqTZzJqSn7IZxvERoHfxKchzpAUHsNn9tI0r15X016Wcgf2+B+T
2eyRJDkTP3dt4oFuML4CXeQvZOgrcZNIWeVFmBK9NcmRg0WDnWPzCE2Mm+lnZD8e
0fefiaLBZw5+ztaz24S/M3mTpZQru8N2FDgLJmpLcPulIuDYpm4tB2PkBc0AmF35
6gC3WDa6cw1qbbDgN83xd9VdlACBe2fYzenhZCqDzgE1zGquORkhuAQYZfdGrixi
ojpn7IKN+JeufiFZuu1xOJeAojIZ4JU42FxM0S1PSXf9deqICzfa1LSOWEaL+V4G
GaPq/nnMhtY2rMGFAQXyCP4YQe2XQU/Jt1SOdFA/UZ1W+oYXwjOlSVo9xpjJV/6y
4TAQ7Yg8S87CUbffYpBLw3Xkg8E0L9ih+E+UOineMcUiu6yxA2Q=
=XeG4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
It is common for networking tests creating its netns and making its own
setting under this new netns (e.g. changing tcp sysctl). If the test
forgot to restore to the original netns, it would affect the
result of other tests.
This patch saves the original netns at the beginning and then restores it
after every test. Since the restore "setns()" is not expensive, it does it
on all tests without tracking if a test has created a new netns or not.
The new restore_netns() could also be done in test__end_subtest() such
that each subtest will get an automatic netns reset. However,
the individual test would lose flexibility to have total control
on netns for its own subtests. In some cases, forcing a test to do
unnecessary netns re-configure for each subtest is time consuming.
e.g. In my vm, forcing netns re-configure on each subtest in sk_assign.c
increased the runtime from 1s to 8s. On top of that, test_progs.c
is also doing per-test (instead of per-subtest) cleanup for cgroup.
Thus, this patch also does per-test restore_netns(). The only existing
per-subtest cleanup is reset_affinity() and no test is depending on this.
Thus, it is removed from test__end_subtest() to give a consistent
expectation to the individual tests. test_progs.c only ensures
any affinity/netns/cgroup change made by an earlier test does not
affect the following tests.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200702004858.2103728-1-kafai@fb.com
This patch makes a few changes to the network_helpers.c
1) Enforce SO_RCVTIMEO and SO_SNDTIMEO
This patch enforces timeout to the network fds through setsockopt
SO_RCVTIMEO and SO_SNDTIMEO.
It will remove the need for SOCK_NONBLOCK that requires a more demanding
timeout logic with epoll/select, e.g. epoll_create, epoll_ctrl, and
then epoll_wait for timeout.
That removes the need for connect_wait() from the
cgroup_skb_sk_lookup.c. The needed change is made in
cgroup_skb_sk_lookup.c.
2) start_server():
Add optional addr_str and port to start_server().
That removes the need of the start_server_with_port(). The caller
can pass addr_str==NULL and/or port==0.
I have a future tcp-hdr-opt test that will pass a non-NULL addr_str
and it is in general useful for other future tests.
"int timeout_ms" is also added to control the timeout
on the "accept(listen_fd)".
3) connect_to_fd(): Fully use the server_fd.
The server sock address has already been obtained from
getsockname(server_fd). The sockaddr includes the family,
so the "int family" arg is redundant.
Since the server address is obtained from server_fd, there
is little reason not to get the server's socket type from the
server_fd also. getsockopt(server_fd) can be used to do that,
so "int type" arg is also removed.
"int timeout_ms" is added.
4) connect_fd_to_fd():
"int timeout_ms" is added.
Some code is also refactored to connect_fd_to_addr() which is
shared with connect_to_fd().
5) Preserve errno:
Some callers need to check errno, e.g. cgroup_skb_sk_lookup.c.
Make changes to do it more consistently in save_errno_close()
and log_err().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200702004852.2103003-1-kafai@fb.com
Add the ktest config option MAIL_MAX_SIZE that will limit the size of the
log file that is placed into the email on failure.
Link: https://lore.kernel.org/r/20200701231756.790637968@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a failure happens and an email is sent, show the contents of the log of
the last test that failed in the email.
Link: http://lore.kernel.org/r/20200701231756.619246244@goodmis.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The script generates two random files that are then sent via tcp and
mptcp connections.
In order to compare throughput over consecutive runs add an option
to provide the file size on the command line: "-f 128000".
Also add an option, -t, to enable tcp tests. This is useful to
compare throughput of mptcp connections and tcp connections.
Example: run tests with a 4mb file size, 300ms delay 0.01% loss,
default gso/tso/gro settings and with large write/blocking io:
mptcp_connect.sh -t -f $((4 * 1024 * 1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program test_progs have some very useful ability to specify a list of
test name substrings for selecting which tests to run.
This patch add the ability to list the selected test names without running
them. This is practical for seeing which tests gets selected with given
select arguments (which can also contain a exclude list via --name-blacklist).
This output can also be used by shell-scripts in a for-loop:
for N in $(./test_progs --list -t xdp); do \
./test_progs -t $N 2>&1 > result_test_${N}.log & \
done ; wait
This features can also be used for looking up a test number and returning
a testname. If the selection was empty then a shell EXIT_FAILURE is
returned. This is useful for scripting. e.g. like this:
n=1;
while [ $(./test_progs --list -n $n) ] ; do \
./test_progs -n $n ; n=$(( n+1 )); \
done
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363985751.930467.9610992940793316982.stgit@firesoul
It can be practial to get the number of tests that test_progs contain.
This could for example be used to create a shell for-loop construct that
runs the individual tests.
Like:
for N in $(seq 1 $(./test_progs -c)); do
./test_progs -n $N 2>&1 > result_test_${N}.log &
done ; wait
V2: Add the ability to return the count for the selected tests. This is
useful for getting a count e.g. after excluding some tests with option -b.
The current beakers test script like to report the max test count upfront.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363985244.930467.12617117873058936829.stgit@firesoul
When a user selects a non-existing test the summary is printed with
indication 0 for all info types, and shell "success" (EXIT_SUCCESS) is
indicated. This can be understood by a human end-user, but for shell
scripting is it useful to indicate a shell failure (EXIT_FAILURE).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363984736.930467.17956007131403952343.stgit@firesoul
The test_vmlinux test uses hrtimer_nanosleep as hook to test tracing
programs. But in a kernel built by clang, which performs more aggresive
inlining, that function gets inlined into its caller SyS_nanosleep.
Therefore, even though fentry and kprobe do hook on the function,
they aren't triggered by the call to nanosleep in the test.
A possible fix is switching to use a function that is less likely to
be inlined, such as hrtimer_range_start_ns. The EXPORT_SYMBOL functions
shouldn't be inlined based on the description of [1], therefore safe
to use for this test. Also the arguments of this function include the
duration of sleep, therefore suitable for test verification.
[1] af3b56289b time: don't inline EXPORT_SYMBOL functions
Tested:
In a clang build kernel, before this change, the test fails:
test_vmlinux:PASS:skel_open 0 nsec
test_vmlinux:PASS:skel_attach 0 nsec
test_vmlinux:PASS:tp 0 nsec
test_vmlinux:PASS:raw_tp 0 nsec
test_vmlinux:PASS:tp_btf 0 nsec
test_vmlinux:FAIL:kprobe not called
test_vmlinux:FAIL:fentry not called
After switching to hrtimer_range_start_ns, the test passes:
test_vmlinux:PASS:skel_open 0 nsec
test_vmlinux:PASS:skel_attach 0 nsec
test_vmlinux:PASS:tp 0 nsec
test_vmlinux:PASS:raw_tp 0 nsec
test_vmlinux:PASS:tp_btf 0 nsec
test_vmlinux:PASS:kprobe 0 nsec
test_vmlinux:PASS:fentry 0 nsec
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200701175315.1161242-1-haoluo@google.com
The log file should be up to date to whatever is happening in ktest.
Disable buffering to the LOG output file handle.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, every write to the log file is done by opening the file, writing
to it, then closing the file. This rather expensive. Just open it at the
beginning and close it at the end.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The new test is similar to other bpf_iter tests. It dumps all
/proc/<pid>/stack to a seq_file. Here is some example output:
pid: 2873 num_entries: 3
[<0>] worker_thread+0xc6/0x380
[<0>] kthread+0x135/0x150
[<0>] ret_from_fork+0x22/0x30
pid: 2874 num_entries: 9
[<0>] __bpf_get_stack+0x15e/0x250
[<0>] bpf_prog_22a400774977bb30_dump_task_stack+0x4a/0xb3c
[<0>] bpf_iter_run_prog+0x81/0x170
[<0>] __task_seq_show+0x58/0x80
[<0>] bpf_seq_read+0x1c3/0x3b0
[<0>] vfs_read+0x9e/0x170
[<0>] ksys_read+0xa7/0xe0
[<0>] do_syscall_64+0x4c/0xa0
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Note: bpf_iter test as-is doesn't print the contents of the seq_file. To
see the example above, it is necessary to add printf() to do_dummy_read.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-5-songliubraving@fb.com
There is a NOT DEFINED operator, but there is not an operator that can
negate any other expression.
For example: NOT (${FOO} == boot || ${BAR} == run)
Add the keyword NOT to allow the ktest.pl config files to negate operators.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, if a PRE_TEST is defined and ran, but fails, there's nothing
currently available to make the test fail too. Add a PRE_TEST_DIE option that
when set, if a PRE_TEST is defined and fails, the test will die too.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a log file is defined and the test were to error, a print statement is
made that shows the user where the log file is to examine it further. But
this is not done if the test were to succeed.
I find it annoying that it does not show where the log file is on success,
as I run several different tests that place their log files in various
locations, and even though the test pass, there's things I want to look at
in the log file (like warnings). It is much easier to find where the log
file is, if it is displayed at the end of a test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When performing a automatic config bisect via ktest.pl, it is very useful to
have a copy of each of the bisects used. This way, if a bisect were to go
wrong, it is possible to retrace the steps and continue at the location
before the error was made.
The ktest.pl will make a copy of the good and bad configs, labeled as such,
as well as a number attached to it that represents the iteration of the
bisect. These files are saved in the ktest temp directory where it currently
stores the good and bad config files.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Debuggers expect that doing PTRACE_GETREGS, then poking at a tracee
and maybe letting it run for a while, then doing PTRACE_SETREGS will
put the tracee back where it was. In the specific case of a 32-bit
tracer and tracee, the PTRACE_GETREGS/SETREGS data structure doesn't
have fs_base or gs_base fields, so FSBASE and GSBASE fields are
never stored anywhere. Everything used to still work because
nonzero FS or GS would result full reloads of the segment registers
when the tracee resumes, and the bases associated with FS==0 or
GS==0 are irrelevant to 32-bit code.
Adding FSGSBASE support broke this: when FSGSBASE is enabled, FSBASE
and GSBASE are now restored independently of FS and GS for all tasks
when context-switched in. This means that, if a 32-bit tracer
restores a previous state using PTRACE_SETREGS but the tracee's
pre-restore and post-restore bases don't match, then the tracee is
resumed with the wrong base.
Fix it by explicitly loading the base when a 32-bit tracer pokes FS
or GS on a 64-bit kernel.
Also add a test case.
Fixes: 673903495c ("x86/process/64: Use FSBSBASE in switch_to() if available")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/229cc6a50ecbb701abd50fe4ddaf0eda888898cd.1593192140.git.luto@kernel.org
The manual call to set_thread_area() via int $0x80 was missing any
indication that the descriptor was a pointer, causing gcc to
occasionally generate wrong code. Add the missing constraint.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/432968af67259ca92d68b774a731aff468eae610.1593192140.git.luto@kernel.org
There are several copies of get_eflags() and set_eflags() and they all are
buggy. Consolidate them and fix them. The fixes are:
Add memory clobbers. These are probably unnecessary but they make sure
that the compiler doesn't move something past one of these calls when it
shouldn't.
Respect the redzone on x86_64. There has no failure been observed related
to this, but it's definitely a bug.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org
Similarly to bpftool Makefile, allow to specify custom location of vmlinux.h
to be used during the build. This allows simpler testing setups with
checked-in pre-generated vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630004759.521530-2-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes: 06716e04a0 ("selftests/bpf: Extend test_flow_dissector to cover link creation")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-7-lmb@cloudflare.com
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes: 1f043f87bb ("selftests/bpf: Add tests for attaching bpf_link to netns")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-6-lmb@cloudflare.com
This case, while not particularly useful, is worth covering because we
expect the operation to succeed as opposed when re-attaching the same
program directly with PROG_ATTACH.
While at it, update the tests summary that fell out of sync when tests
extended to cover links.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com
Apart from read and write access, memory protection keys can
also be used for restricting execute permission of pages on
powerpc. This adds a test to verify if the feature works as
expected.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-4-sandipan@linux.ibm.com
The Power ISA mandates that all writes to the Authority
Mask Register (AMR) must always be preceded as well as
succeeded by a context synchronizing instruction.
This makes sure that the tests follow this requirement
when attempting to update a pkey's access rights.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200604125610.649668-2-sandipan@linux.ibm.com
Add tests to check ethtool report about extended state.
The tests configure several states and verify that the correct extended
state is reported by ethtool.
Check extended state with substate (Autoneg) and extended state without
substate (No cable).
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add NETIF_NO_CABLE port to tests topology.
The port can also be declared as an environment variable and tests can be
run like that:
NETIF_NO_CABLE=eth9 ./test.sh eth{1..8}
The NETIF_NO_CABLE port will be used by ethtool_extended_state test.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently different_speeds_get() is used only by ethtool.sh tests.
The function can be useful for another tests that check ethtool
configurations.
Move the function to ethtool_lib in order to allow other tests to use
it.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is inspired by the mlxsw RED selftest. It is much simpler to set
up (also because there is no point in testing PRIO / RED encapsulation). It
tests bare RED, ECN and ECN+nodrop modes of operation. On top of that it
tests RED early_drop and mark qevents.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reverted commit illegitly uses tpm2-tools. External dependencies are
absolutely forbidden from these tests. There is also the problem that
clearing is not necessarily wanted behavior if the test/target computer is
not used only solely for testing.
Fixes: a9920d3bad ("tpm: selftest: cleanup after unseal with wrong auth/policy test")
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the dim distant past, qemu commands needed to be run from the
rcutorture directory, but this is no longer the case. This commit
therefore removes the now-useless "cd $KVM" from the kvm-test-1-run.sh
script.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the qemu command is constructed twice, once to dump it
to the qemu-cmd file and again to execute it. This is of course an
accident waiting to happen, but is done to ensure that the remainder
of the script has an accurate idea of the running qemu command's PID.
This commit therefore places both the qemu command and the PID capture
into a new temporary file and sources that temporary file. Thus the
single construction of the qemu command into the qemu-cmd file suffices
for both purposes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a script that transforms qemu-cmd files to allow them
and the corresponding kernels to be run in contexts other than the one
that they were created for, including on systems other than the one that
they were built on. For example, this allows the build products from a
--buildonly run to be transformed to allow distributed rcutorture testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Using --kcsan when the compiler does not support KCSAN results in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
This is a bit obtuse, so this commit adds checks resulting in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Compiler or architecture does not support KCSAN!
Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Currently, kvm-recheck.sh complains that qemu failed for --buildonly
runs, which is sort of true given that qemu can hardly succeed if not
invoked in the first place. Nevertheless, this commit swaps the order
of checks in kvm-recheck.sh so that --buildonly runs will be summarized
more straightforwardly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We need to pass the arguments provided to --kmake-arg to all make
invocations. In particular, the make invocations generating the configs
need to see the final make arguments, e.g. if config variables depend on
particular variables that are passed to make.
For example, when using '--kcsan --kmake-arg CC=clang-11', we would lose
CONFIG_KCSAN=y due to 'make oldconfig' not seeing that we want to use a
compiler that supports KCSAN.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit pulls the simple pattern-based error detection from the
console log into a new console-badness.sh file. This will enable future
commits to end a run on the first error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When bisecting RCU issues, it is often the case that the first error in
an unsuccessful run will happen quickly, but that a successful run must
go on for some time in order to obtain a sufficiently low false-negative
error rate. In many cases, a bisection requires multiple concurrent
runs, in which case the first failure in any run indicates failure,
pure and simple. In such cases, it would speed things up greatly if
the first failure terminated all runs.
This commit therefore adds scripting that checks for a file named "STOP"
in the top-level results directory, terminating the run when it appears.
Note that in-progress builds will continue until completion, but future
builds and all runs will be cut short.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
One reason to do a --buildonly run is to use the build products elsewhere,
for example, to do the actual test on some other system. Part of doing
the test is the actual qemu command, which is not currently produced
by --buildonly runs. This commit therefore causes --buildonly runs to
create this file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Leaving off the kvm.sh script's --cpus argument results in the script
testing the scenarios sequentially, which can be quite slow. However,
having to specify the actual number of CPUs can be error-prone.
This commit therefore adds a --allcpus argument that causes kvm.sh to
use all available CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The identify_qemu_vcpus bash function can return numbers including
whitespace characters, which can be a bit annoying in some bash
dollar-sign substitutions. This commit therefore strips all spaces and
tabs from the value that identify_qemu_vcpus outputs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current console parsing assumes that console lines containing "!!!"
are statistics lines from which it can parse the number of rcutorture
too-short grace-period failures. This prints confusing output for
other problems, including memory exhaustion. This commit therefore
differentiates between these cases and prints an appropriate error string.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture-test recheck logic fails to set the configfile variable to
the current scenario, so this commit properly initializes this variable.
This change isn't critical given that all errors for a given scenario
follow that scenario's heading, but it is easier on the eyes to repeat it.
And this repetition also prevents confusion as to whether a given message
goes with the previous heading or the next one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-check-branches.sh script that takes a list
of commits and commit ranges and runs a short rcutorture test on all
scenarios on each specified commit. A summary is printed at the end, and
the script returns success if all rcutorture runs completed without error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On some (probably misconfigured) systems, the torture-test scripting
will cause qemu to complain about missing EFI firmware, often because
qemu is trying to traverse broken symbolic links to find that firmware.
Which is a bit silly given that the default torture-test guest OS has
but a single binary for its userspace, and thus is unlikely to do much
in the way of networking in any case.
This commit therefore avoids such problems by specifying "-net none"
to qemu unless the TORTURE_QEMU_INTERACTIVE environment variable is set
(for example, by having specified "--interactive" to kvm.sh), in which
case "-net nic -net user" is specified to qemu instead. Either choice
may be overridden by specifying the "-net" argument of your choice to
the kvm.sh "--qemu-args" parameter.
Link: https://lore.kernel.org/lkml/20190701141403.GA246562@google.com
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This commit renames the rcutorture config/refperf to config/refscale to
further avoid conflation with the Linux kernel's perf feature.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of refperf with the kernel's perf
feature by renaming kernel/rcu/refperf.c to kernel/rcu/refscale.c,
and also by similarly renaming the functions and variables inside
this file. This has the side effect of changing the names of the
kernel boot parameters, so kernel-parameters.txt and ver_functions.sh
are also updated.
The rcutorture --torture type remains refperf, and this will be
addressed in a separate commit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The old Kconfig option name is all too easy to conflate with the
unrelated "perf" feature, so this commit renames RCU_REF_PERF_TEST to
RCU_REF_SCALE_TEST.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, it is necessary to manually edit the console output to see
anything more than statistics, and sometimes the statistics can indicate
outliers that need more investigation. This commit therefore dumps out
the per-experiment measurements, sorted in ascending order, just before
dumping out the statistics.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The experiment-number column is currently labeled "Threads", which is
misleading at best. This commit therefore relabels it as "Runs", and
adjusts the scripts accordingly.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates the rcutorture scripting to include the new refperf
torture-test module.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
I'd like arch-specific tests to XFAIL when on a mismatched architecture
so that we can more easily compare test coverage across all systems.
Lacking kernel configs or CPU features count as a FAIL, not an XFAIL.
Additionally fixes a build failure under 32-bit UML.
Fixes: b09511c253 ("lkdtm: Add a DOUBLE_FAULT crash type on x86")
Fixes: cea23efb4d ("lkdtm/bugs: Make double-fault test always available")
Fixes: 6cb6982f42 ("lkdtm: arm64: test kernel pointer authentication")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we expect to see warnings every time for many tests, just reset
the WARN_ONCE flags each time the script runs.
Fixes: 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a selftest for the usage of FPU code in kernel mode.
Currently only implemented for x86. In the future, kernel FPU testing
could be unified between the different architectures supporting it.
[ bp:
- Split out from a conglomerate patch, put comments over statements.
- run the test only on debugfs write.
- Add bare-minimum run_test_fpu.sh, run 1000 iterations on all CPUs
by default.
- Add conditionally -msse2 so that clang doesn't generate library
calls.
- Use cc-option to detect gcc 7.1 not supporting -mpreferred-stack-boundary=3 (amluto).
- Document stuff so that we don't forget.
- Fix:
ld: lib/test_fpu.o: in function `test_fpu_get':
>> test_fpu.c:(.text+0x16e): undefined reference to `__sanitizer_cov_trace_cmpd'
>> ld: test_fpu.c:(.text+0x1a7): undefined reference to `__sanitizer_cov_trace_cmpd'
ld: test_fpu.c:(.text+0x1e0): undefined reference to `__sanitizer_cov_trace_cmpd'
]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200624114646.28953-3-bp@alien8.de
Validate that BPF object with broken (in multiple ways) BPF program can still
be successfully loaded, if that broken BPF program is disabled.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-3-andriin@fb.com
A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
Two minor build fixes.
Thanks to:
Aneesh Kumar K.V, Arseny Solokha, Harish.
-----BEGIN PGP SIGNATURE-----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=TvGN
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
- Two minor build fixes.
Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.
* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure in ebb tests
powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl71tgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB5sB/48VLEeDtkRtHVQntLG9SFogwDkHjkRW/lo
kgO5APEcdhZZq3mBY2fIww5iX5Et7vRpx8ovempmqZGhO9B4ZMSNG0DFxoYdtXTU
jgox+LzkW+hYldK1Bv03ioLZgIz6Lc8zyK6kRB7NuDN88VEVds0ksYmcAojeIN9b
vmpquEAoVppm0VPjt6VA0xQ6HtiKfvlV7PW6Pqs0dKovnNY982jRXBMzaGBbDFQ7
3eKmW4PBru/Ew16J172vf/0sBJQBiZrSdXCqv/USKvPHkUDkJiYsaWLpsWx4m4to
bE/OS6aWx94NcgxPUca3y2G2OhPU+VFiXjuJ0kvzt4EJIuW/CGUf
=2kBR
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
When separating out different phases of running tests[1]
(build/exec/parse/etc), the format of the KunitResult tuple changed
(adding an elapsed_time variable). This is not populated during a build
failure, causing kunit.py to crash.
This fixes [1] to probably populate the result variable, causing a
failing build to be reported properly.
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45ba7a893ad89114e773b3dc32f6431354c465d6
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, if the kernel is configured incorrectly or if it crashes before any
kunit tests are run, kunit finishes without error, reporting
that 0 test cases were run.
To fix this, an error is shown when the tap header is not found, which
indicates that kunit was not able to run at all.
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is
updated") introduced a new CONFIG option CONFIG_CC_VERSION_TEXT. On my
system, this is set to "gcc (GCC) 10.1.0" which breaks KUnit config
parsing which did not like the spaces in the string.
Fix this by updating the regex to allow strings containing spaces.
Fixes: 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is updated")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Changeset 1eecbcdca2 ("docs: move protection-keys.rst to the core-api book")
from Jun 7, 2019 converted protection-keys.txt file to ReST.
A recent change at protection_keys.c partially reverted such
changeset, causing it to point to a non-existing file:
- * Tests x86 Memory Protection Keys (see Documentation/core-api/protection-keys.rst)
+ * Tests Memory Protection Keys (see Documentation/vm/protection-keys.txt)
It sounds to me that the changeset that introduced such change
4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
could also have other side effects, as it sounds that it was not
generated against uptream code, but, instead, against a version
older than Jun 7, 2019.
Fixes: 4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/cf65aa052669f55b9dc976a5c8026aef5840741d.1592895969.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP. This is consistent
with other prog types like tracing.
Fixes: 2778797037 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These newly added macros will be used in subsequent bpf iterator
tcp{4,6} and udp{4,6} programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230819.3989050-1-yhs@fb.com
Refactor bpf_iter_ipv6_route.c and bpf_iter_netlink.c
so net macros, originally from various include/linux header
files, are moved to a new header file
bpf_tracing_net.h. The goal is to improve reuse so
networking tracing programs do not need to
copy these macros every time they use them.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230817.3988962-1-yhs@fb.com
Commit b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest
compilable against old vmlinux.h") and Commit dda18a5c0b
("selftests/bpf: Convert bpf_iter_test_kern{3, 4}.c to define
own bpf_iter_meta") redefined newly introduced types
in bpf programs so the bpf program can still compile
properly with old kernels although loading may fail.
Since this patch set introduced new types and the same
workaround is needed, so let us move the workaround
to a separate header file so they do not clutter
bpf programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230816.3988656-1-yhs@fb.com
check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.
Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXvNBJgAKCRCRxhvAZXjc
oulGAPoCPfCguA8TPcy4tq4byGPoThyO4XnWR6XcUDOEzhbzzAEA+s5S7iRV8W92
p2gzbI4Kncq4dQNEtUvfPHQZDAEwTA0=
=eZDz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d1 ("nsproxy: attach
to namespaces via pidfds").
The LTP testsuite reported a regression where users would now see
EBADF returned instead of EINVAL when an fd was passed that referred
to an open file but the file was not a namespace file.
Fix this by continuing to report EINVAL and add a regression test"
* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test for setns() EINVAL regression
nsproxy: restore EINVAL for non-namespace file descriptor
This patch adds support of SO_KEEPALIVE flag and TCP related options
to bpf_setsockopt() routine. This is helpful if we want to enable or tune
TCP keepalive for applications which don't do it in the userspace code.
v3:
- update kernel-doc in uapi (Nikita Vetoshkin <nekto0n@yandex-team.ru>)
v4:
- update kernel-doc in tools too (Alexei Starovoitov)
- add test to selftests (Alexei Starovoitov)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200620153052.9439-3-zeil@yandex-team.ru
./test_progs-no_alu32 -t get_stack_raw_tp
fails due to:
52: (85) call bpf_get_stack#67
53: (bf) r8 = r0
54: (bf) r1 = r8
55: (67) r1 <<= 32
56: (c7) r1 s>>= 32
; if (usize < 0)
57: (c5) if r1 s< 0x0 goto pc+26
R0=inv(id=0,smax_value=800) R1_w=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff)) R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R8_w=inv(id=0,smax_value=800) R9=inv800
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
58: (1f) r9 -= r8
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
59: (bf) r2 = r7
60: (0f) r2 += r1
regs=1 stack=0 before 52: (85) call bpf_get_stack#67
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
61: (bf) r1 = r6
62: (bf) r3 = r9
63: (b7) r4 = 0
64: (85) call bpf_get_stack#67
R0=inv(id=0,smax_value=800) R1_w=ctx(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=1600,umax_value=800,var_off=(0x0; 0x3ff),s32_max_value=1023,u32_max_value=1023) R3_w=inv(id=0,umax_value=9223372036854776608)
R3 unbounded memory access, use 'var &= const' or 'if (var < const)'
In the C code:
usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
if (usize < 0)
return 0;
ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
if (ksize < 0)
return 0;
We used to have problem with pointer arith in R2.
Now it's a problem with two integers in R3.
'if (usize < 0)' is comparing R1 and makes it [0,800], but R8 stays [-inf,800].
Both registers represent the same 'usize' variable.
Then R9 -= R8 is doing 800 - [-inf, 800]
so the result of "max_len - usize" looks unbounded to the verifier while
it's obvious in C code that "max_len - usize" should be [0, 800].
To workaround the problem convert ksize and usize variables from int to long.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The arm64 signal tests generate warnings during build since both they and
the toplevel lib.mk define a clean target:
Makefile:25: warning: overriding recipe for target 'clean'
../../lib.mk:126: warning: ignoring old recipe for target 'clean'
Since the inclusion of lib.mk is in the signal Makefile there is no
situation where this warning could be avoided so just remove the redundant
clean target.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200624104933.21125-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Run rxtimestamp as part of TEST_PROGS. Analogous to other tests, add
new rxtimestamp.sh wrapper script, so that the test runs isolated
from background traffic in a private network namespace.
Also ignore failures of test case #6 by default. This case verifies
that a receive timestamp is not reported if timestamp reporting is
enabled for a socket, but generation is disabled. Receive timestamp
generation has to be enabled globally, as no associated socket is
known yet. A background process that enables rx timestamp generation
therefore causes a false positive. Ntpd is one example that does.
Add a "--strict" option to cause failure in the event that any test
case fails, including test #6. This is useful for environments that
are known to not have such background processes.
Tested:
make -C tools/testing/selftests TARGETS="net" run_tests
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.
Adjust one of bpf_iter selftest to exhibit this pattern.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
Extend original variable-length tests with a case to catch a common
existing pattern of testing for < 0 for errors. Note because
verifier also tracks upper bounds and we know it can not be greater
than MAX_LEN here we can skip upper bound check.
In ALU64 enabled compilation converting from long->int return types
in probe helpers results in extra instruction pattern, <<= 32, s >>= 32.
The trade-off is the non-ALU64 case works. If you really care about
every extra insn (XDP case?) then you probably should be using original
int type.
In addition adding a sext insn to bpf might help the verifier in the
general case to avoid these types of tricks.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-3-andriin@fb.com
Add selftest that validates variable-length data reading and concatentation
with one big shared data array. This is a common pattern in production use for
monitoring and tracing applications, that potentially can read a lot of data,
but overall read much less. Such pattern allows to determine precisely what
amount of data needs to be sent over perfbuf/ringbuf and maximize efficiency.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-2-andriin@fb.com
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.
In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate libbpf is able to handle weak and strong kernel symbol externs in BPF
code correctly.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-4-andriin@fb.com
Add a test that checks that pedit adjusts port numbers of tcp and udp
packets.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftests to test access to map pointers from bpf program for all
map types except struct_ops (that one would need additional work).
verifier test focuses mostly on scenarios that must be rejected.
prog_tests test focuses on accessing multiple fields both scalar and a
nested struct from bpf program and verifies that those fields have
expected values.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/139a6a17f8016491e39347849b951525335c6eb4.1592600985.git.rdna@fb.com
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
If the kernel erroneously allows WRGSBASE and user code writes a
negative value, paranoid_entry will get confused. Check for this by
writing a negative value to GSBASE and doing SYSENTER with TF set. A
successful run looks like:
[RUN] SYSENTER with TF, invalid state, and GSBASE < 0
[SKIP] Illegal instruction
A failed run causes a kernel hang, and I believe it's because we
double-fault and then get a never ending series of page faults and,
when we exhaust the double fault stack we double fault again,
starting the process over.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/f4f71efc91b9eae5e3dae21c9aee1c70cf5f370e.1590620529.git.luto@kernel.org
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
The alignment handler selftest needs cache-inhibited memory and
currently /dev/fb0 is relied on to provided this. This prevents running
the test on systems without /dev/fb0 (e.g., mambo). Read the commandline
arguments for an optional path to be used instead, as well as an
optional offset to be for mmaping this path.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-1-jniethe5@gmail.com
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new strict mode functionality is tested in different configurations and
on different network namespaces.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This Kselftest update for Linux 5.8-rc2 consists of:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
-----BEGIN PGP SIGNATURE-----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=nqUq
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest cleanups from Shuah Khan:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Support ":README" suffix for requires
selftests/ftrace: Support ":tracer" suffix for requires
selftests/ftrace: Convert check_filter_file() with requires list
selftests/ftrace: Convert required interface checks into requires list
selftests/ftrace: Add "requires:" list support
selftests/ftrace: Return unsupported for the unconfigured features
selftests/ftrace: Allow ":" in description
tools: testing: ftrace: trigger: fix spelling mistake
The ETF qdisc can queue skbs that it could not pace on the errqueue.
Address a few issues in the selftest
- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type
v2:
- fix a few checkpatch --strict indentation warnings
Fixes: ea6a547669 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added two test_verifier subtests for 32bit pointer/scalar arithmetic
with BPF_SUB operator. They are passing verifier now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200618234632.3321367-1-yhs@fb.com
Make it bit easier to parse the kernel logs during the selftests by
adding a "===== TEST: $test =====" delimiter when each individual test
begins.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-4-joe.lawrence@redhat.com
The livepatch selftests currently grep on "taints" to filter out
"tainting kernel with TAINT_LIVEPATCH" messages which may be logged when
loading livepatch modules.
Further filter the log to drop "loading out-of-tree module taints
kernel" in the rare case the klp_test modules have been built
out-of-tree.
Look for the longer "taints kernel" or "tainting kernel" strings to
avoid inadvertent partial matching.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-3-joe.lawrence@redhat.com
Inspired by commit f131d9edc2 ("selftests/lkdtm: Don't clear dmesg
when running tests"), keep a reference dmesg copy when beginning each
test. This way check_result() can compare against the initial copy
rather than relying upon an empty log.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-2-joe.lawrence@redhat.com
This validates that GS selector and base are independently preserved in
ptrace commands.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200528201402.1708239-17-sashal@kernel.org
The test validates that the selector is not changed when a ptracer writes
the ptracee's GS base.
Originally-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200528201402.1708239-16-sashal@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 158 insertions(+), 59 deletions(-).
The main changes are:
1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii.
2) [gs]etsockopt fix for large optlen, from Stanislav.
3) devmap allocation fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
Verify that setns() reports EINVAL when an fd is passed that refers to an
open file but the file is not a file descriptor useable to interact with
namespaces.
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Cyril Hrubis <chrubis@suse.cz>
Link: https://lore.kernel.org/lkml/20200615085836.GR12456@shao2-debian
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This adds basic tests for the new close_range() syscall.
- test that no invalid flags can be passed
- test that a range of file descriptors is correctly closed
- test that a range of file descriptors is correctly closed if there there
are already closed file descriptors in the range
- test that max_fd is correctly capped to the current fdtable maximum
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Add ":README" suffix support for the requires list, so that
the testcase can list up the required string for README file
to the requires list.
Note that the required string is treated as a fixed string,
instead of regular expression. Also, the testcase can specify
a string containing spaces with quotes. E.g.
# requires: "place: [<module>:]<symbol>":README
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add ":tracer" suffix support for the requires list, so that
the testcase can list up the required tracer (e.g. function)
to the requires list.
For example, if the testcase requires function_graph tracer,
it can write requires list as below instead of checking
available_tracers.
# requires: function_graph:tracer
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since check_filter_file() is basically checking the filter
tracefs file, we can convert it into requires list.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce "requires:" list to check required ftrace interface
for each test. This will simplify the interface checking code
and unify the error message. Another good point is, it can
skip the ftrace initializing.
Note that this requires list must be written as a shell
comment.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As same as other test cases, return unsupported if kprobe_events
or argument access feature are not found.
There can be a new arch which does not port those features yet,
and an older kernel which doesn't support it.
Those can not enable the features.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow ":" in the description line. Currently if there is ":"
in the test description line, the description is cut at that
point, but that was unintended.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
s390 cannot set syscall number and reture code at the same time,
so set the appropriate flag to indicate it.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
It was reported that older GCCs compile smm_test in a way that breaks
it completely:
kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0
func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found
...
kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0
kvm_msr: msr_read 487 = 0x0 (#GP)
...
Note, '7ffffffd' was supposed to be '80000001' as we're checking for
SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in
sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync
with the host and in 'AL' register we actually pass the parameter
(stage) but after sync 'AL' gets written to but GCC thinks the value
is still there and uses it to compute 'EAX' for 'cpuid'.
smm_test can't fully use standard ucall() framework as we need to
write a very simple SMI handler there. Fix the immediate issue by
making RAX input/output operand. While on it, make sync_with_host()
static inline.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610164116.770811-1-vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_HYPERV_ENLIGHTENED_VMCS will be reported as supported even when
nested VMX is not, fix evmcs_test/hyperv_cpuid tests to check for both.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for
nested VMX/SVM presence and this is incorrect. Check for the required
features dirrectly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cgroup_skb/egress triggers the MAC header is not set. Added a
test that asserts reading MAC header is a -EFAULT but NET header
succeeds. The test result from within the eBPF program is stored in
an 1-element array map that the userspace then reads and asserts on.
Another assertion is added that reading from a large offset, past
the end of packet, returns -EFAULT.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/9028ccbea4385a620e69c0a104f469ffd655c01e.1591812755.git.zhuyifei@google.com
The loop exits with "timeout" set to -1 and not to 0 so the test needs to
be fixed.
Fixes: e7b592f6caca ("khugepaged: add self test")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zi Yan <ziy@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: http://lkml.kernel.org/r/20200605110736.GH978434@mwanda
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
getopt_long requires the last element to be filled with zeros.
Otherwise, passing an unrecognized option can cause a segfault.
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using BPF_PROG_ATTACH to attach a program to a cgroup in
BPF_F_ALLOW_MULTI mode, it is not possible to replace a program
with itself. This is because the check for duplicate programs
doesn't take the replacement program into account.
Replacing a program with itself might seem weird, but it has
some uses: first, it allows resetting the associated cgroup storage.
Second, it makes the API consistent with the non-ALLOW_MULTI usage,
where it is possible to replace a program with itself. Third, it
aligns BPF_PROG_ATTACH with bpf_link, where replacing itself is
also supported.
Sice this code has been refactored a few times this change will
only apply to v5.7 and later. Adjustments could be made to
commit 1020c1f24a ("bpf: Simplify __cgroup_bpf_attach") and
commit d7bf2c10af ("bpf: allocate cgroup storage entries on attaching bpf programs")
as well as commit 324bda9e6c ("bpf: multi program support for cgroup+bpf")
Fixes: af6eea5743 ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200608162202.94002-1-lmb@cloudflare.com
No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN will
reboot the box before the error messages are printed if panic_on_warn
is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used by
other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXt+LEhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj2zAP9sD/W4jafYayucj+MvRP7sy+Q0iAH7
WMn8fkk958cgfQD8D1QFtkkx+3O3TRT6ApGf11w5+JgSWUE2gSbW9H4fPQk=
=X5t4
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN
will reboot the box before the error messages are printed if
panic_on_warn is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used
by other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups"
* tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
tracing/doc: Fix ascii-art in histogram-design.rst
tracing: Add a trace print when traceoff_on_warning is triggered
ftrace,bug: Improve traceoff_on_warn
selftests/ftrace: Distinguish between hist and synthetic event checks
tracing: Move synthetic events to a separate file
tracing: Fix events.rst section numbering
tracing/doc: Fix typos in histogram-design.rst
tracing: Add hist_debug trace event files for histogram debugging
tracing: Add histogram-design document
tracing: Check state.disabled in synth event trace functions
tracing/probe: reverse arguments to list_add
tools/bootconfig: Add a summary of test cases and return error
ftrace: show debugging information when panic_on_warn set
This Kunit update for Linux 5.8-rc1 consists of:
- Several config fragment fixes from Anders Roxell to improve
test coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru Iha
and David Gow.
- Miscellaneous documentation warn fix.
-----BEGIN PGP SIGNATURE-----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=S+HY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit updates from Shuah Khan:
"This consists of:
- Several config fragment fixes from Anders Roxell to improve test
coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru
Iha and David Gow.
- Miscellaneous documentation warn fix"
* tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS
fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS
drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS
lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment
kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig
kunit: use KUnit defconfig by default
kunit: use --build_dir=.kunit as default
Documentation: test.h - fix warnings
kunit: kunit_tool: Separate out config/build/exec/parse
This Kselftest update for Linux 5.8-rc1 consists of:
- Several fixes from Masami Hiramatsu to improve coverage for
lib and sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests.
-----BEGIN PGP SIGNATURE-----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=IB5c
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This consists of:
- Several fixes from Masami Hiramatsu to improve coverage for lib and
sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika
Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests"
* tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sysctl: Make sysctl test driver as a module
selftests/sysctl: Fix to load test_sysctl module
lib: Make test_sysctl initialized as module
lib: Make prime number generator independently selectable
selftests/ftrace: Return unsupported if no error_log file
selftests/ftrace: Use printf for backslash included command
selftests/timens: handle a case when alarm clocks are not supported
Kernel selftests: Add check if TPM devices are supported
selftests: vdso: Add a selftest for vDSO getcpu()
selftests: vdso: Use a header file to prototype parse_vdso API
selftests: vdso: Rename vdso_test to vdso_test_gettimeofday
selftests/exec: Verify execve of non-regular files fail
selftests: introduce gen_tar Makefile target
Explicitly set the VA width to 48 bits for the x86_64-only PXXV48_4K VM
mode instead of asserting the guest VA width is 48 bits. The fact that
KVM supports 5-level paging is irrelevant unless the selftests opt-in to
5-level paging by setting CR4.LA57 for the guest. The overzealous
assert prevents running the selftests on a kernel with 5-level paging
enabled.
Incorporate LA57 into the assert instead of removing the assert entirely
as a sanity check of KVM's CPUID output.
Fixes: 567a9f1e9d ("KVM: selftests: Introduce VM_MODE_PXXV48_4K")
Reported-by: Sergio Perez Gonzalez <sergio.perez.gonzalez@intel.com>
Cc: Adriana Cervantes Jimenez <adriana.cervantes.jimenez@intel.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200528021530.28091-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
