When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).
That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:
<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>
Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.
[1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
[2] 8bc15a35d0/riscv-plic.adoc
Fixes: bb0fed1c60 ("irqchip/sifive-plic: Switch to fasteoi flow")
Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
Tested-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[maz: amended commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211105094748.3894453-1-guoren@kernel.org
The mask/unmask must be implemented, and enable/disable supplement
them if the HW requires something different at startup time. When
irq source is disabled by mask, mpintc could complete irq normally.
So drop enable/disable if favour of mask/unmask.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211101134534.3804542-1-guoren@kernel.org
* irq/irq_cpu_offline:
: .
: Make irq_cpu_{on,off}line() deprecated kernel API, and only
: enable it for some obscure Cavium platform after having
: moved all the other users away from it.
:
: Next step, drop the platform itself.
: .
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* irq/remove-handle-domain-irq-20211026:
: Large rework of the architecture entry code from Mark Rutland.
: From the cover letter:
:
: <quote>
: The handle_domain_{irq,nmi}() functions were oringally intended as a
: convenience, but recent rework to entry code across the kernel tree has
: demonstrated that they cause more pain than they're worth and prevent
: architectures from being able to write robust entry code.
:
: This series reworks the irq code to remove them, handling the necessary
: entry work consistently in entry code (be it architectural or generic).
: </quote>
MIPS: irq: Avoid an unused-variable error
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
irq: mips: stop (ab)using handle_domain_irq()
irq: mips: simplify bcm6345_l1_irq_handle()
irq: mips: avoid nested irq_enter()
Signed-off-by: Marc Zyngier <maz@kernel.org>
The MIPS GIC driver uses irq_cpu_online() to go and program the
per-CPU interrupts. However, this method iterates over all IRQs
in the system, despite only 3 per-CPU interrupts being of interest.
Let's be terribly bold and do the iteration ourselves. To ensure
mutual exclusion, hold the gic_lock spinlock that is otherwise
taken while dealing with these interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
Now that entry code handles IRQ entry (including setting the IRQ regs)
before calling irqchip code, irqchip code can safely call
generic_handle_domain_irq(), and there's no functional reason for it to
call handle_domain_irq().
Let's cement this split of responsibility and remove handle_domain_irq()
entirely, updating irqchip drivers to call generic_handle_domain_irq().
For consistency, handle_domain_nmi() is similarly removed and replaced
with a generic_handle_domain_nmi() function which also does not perform
any entry logic.
Previously handle_domain_{irq,nmi}() had a WARN_ON() which would fire
when they were called in an inappropriate context. So that we can
identify similar issues going forward, similar WARN_ON_ONCE() logic is
added to the generic_handle_*() functions, and comments are updated for
clarity and consistency.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
In preparation for removing HANDLE_DOMAIN_IRQ_IRQENTRY, have arch/arm
perform all the irqentry accounting in its entry code.
For configurations with CONFIG_GENERIC_IRQ_MULTI_HANDLER, we can use
generic_handle_arch_irq(). Other than asm_do_IRQ(), all C calls to
handle_IRQ() are from irqchip handlers which will be called from
generic_handle_arch_irq(), so to avoid double accounting IRQ entry, the
entry logic is moved from handle_IRQ() into asm_do_IRQ().
For ARMv7M the entry assembly is tightly coupled with the NVIC irqchip, and
while the entry code should logically live under arch/arm/, moving the
entry logic there makes things more convoluted. So for now, place the
entry logic in the NVIC irqchip, but separated into a separate
function to make the split of responsibility clear.
For all other configurations without CONFIG_GENERIC_IRQ_MULTI_HANDLER,
IRQ entry is already handled in arch code, and requires no changes.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
In preparation for removing HANDLE_DOMAIN_IRQ, have arch/nds32 perform
all the necessary IRQ entry accounting in its entry code.
Currently arch/nds32 is tightly coupled with the ativic32 irqchip, and
while the entry code should logically live under arch/nds32/, moving the
entry logic there makes things more convoluted. So for now, place the
entry logic in the ativic32 irqchip, but separated into a separate
function to make the split of responsibility clear.
In future this should probably use GENERIC_IRQ_MULTI_HANDLER to cleanly
decouple this.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
As bcm6345_l1_irq_handle() only needs to know /whether/ an IRQ was
resolved, and doesn't need to know the specific IRQ, it's simpler for it
to call generic_handle_domain_irq() directly and check the return code,
so let's do that.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.
When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.
Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.
Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.
Fixes: c7c42ec2ba ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
* irq/mchp-eic:
: .
: New irqchip driver for the Microchip EIC block
: .
irqchip/mchp-eic: Fix return value check in mchp_eic_init()
irqchip/mchp-eic: Add support for the Microchip EIC
dt-bindings: microchip,eic: Add bindings for the Microchip EIC
Signed-off-by: Marc Zyngier <maz@kernel.org>
* irq/modular-irqchips:
: .
: Update a set of irqchip drivers to be build as modules.
:
: This includes an Amlogic and multiple Broadcom drivers, triggering
: a cascade of other changes (MIPS arch code, symbols being exported,
: config changes)
: .
irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLARE
ARM: bcm: Removed forced select of interrupt controllers
arm64: broadcom: Removed forced select of interrupt controllers
irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_noop()
irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER
genirq: Export irq_gc_{unmask_enable,mask_disable}_reg
irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER
irqchip/irq-bcm7038-l1: Restrict affinity setting to MIPS
irqchip/irq-bcm7038-l1: Gate use of CPU logical map to MIPS
irqchip/irq-bcm7038-l1: Use irq_get_irq_data()
irqchip/irq-bcm7038-l1: Remove .irq_cpu_offline()
MIPS: BMIPS: Remove use of irq_cpu_offline
arm64: meson: remove MESON_IRQ_GPIO selection
irqchip/meson-gpio: Make it possible to build as a module
irqchip: Provide stronger type checking for IRQCHIP_MATCH/IRQCHIP_DECLARE
Signed-off-by: Marc Zyngier <maz@kernel.org>
In case of error, the function of_iomap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211025050055.1129845-1-yangyingliang@huawei.com
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
To avoid using of_irq_count() which is not exported towards module,
switch the driver to use the platform_device provided by the irqchip
platform driver code and resolve the number of interrupts using
platform_irq_count().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-11-f.fainelli@gmail.com
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-9-f.fainelli@gmail.com
Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-7-f.fainelli@gmail.com
Only MIPS based platforms using this interrupt controller as first level
interrupt controller can actually change the affinity of interrupts by
re-programming the affinity mask of the interrupt controller and use
another word group to have another CPU process the interrupt.
When this interrupt is used as a second level interrupt controller on
ARM/ARM64 there is no way to change the interrupt affinity. This fixes a
NULL pointer de-reference while trying to change the affinity since
there is only a single word group in that case, and we would have been
overruning the intc->cpus[] array.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-6-f.fainelli@gmail.com
The use of the cpu_logical_map[] array is only relevant for MIPS based
platform where this driver is used as a first level interrupt controller
and contains multiple register groups to map with an associated CPU.
On ARM/ARM64 based systems this interrupt controller is present and used
as a second level interrupt controller hanging off the ARM GIC. That
copy of the interrupt controller contains a single group, resulting in
the intc->cpus[] array to be of size 1.
Things happened to work in that case because we install that interrupt
controller as a chained handler which does not allow it to be affine to
any CPU but the boot CPU which happens to be 0, therefore we never
de-reference past intc->cpus[] but with the current code in place, we do
leave a chance of de-referencing the array past its bounds.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-5-f.fainelli@gmail.com
Using irq_desc_get_irq_data(irq_to_desc()) to retrieve the irq_data
structure from a virtual interrupt number is going to be problematic to
make irq-bcm7038-l1 a module because irq_to_desc() is not exported, and
there is no intent to export it to modules, see 64a1b95bb9 ("genirq:
Restrict export of irq_to_desc()").
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-4-f.fainelli@gmail.com
With arch/mips/kernel/smp-bmips.c having been migrated away from
irq_cpu_offline() and use irq_migrate_all_off_this_cpu() instead, we no
longer need to implement an .irq_cpu_offline() callback. This is a
necessary change to facilitate the building of this driver as a module.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211020184859.2705451-3-f.fainelli@gmail.com
Add support for Microchip External Interrupt Controller. The controller
supports 2 external interrupt lines. For every external input there is
a connection to GIC. The interrupt controllers contains only 4
registers:
- EIC_GFCS (read only): which indicates that glitch filter configuration
is ready (not addressed in this implementation)
- EIC_SCFG0R, EIC_SCFG1R (read, write): allows per interrupt specific
settings: enable, polarity/edge settings, glitch filter settings
- EIC_WPMR, EIC_WPSR: enables write protection mode specific settings
(which are architecture specific) for the controller and are not
addressed in this implementation
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210927063657.2157676-3-claudiu.beznea@microchip.com
In order to reduce the kernel Image size on multi-platform distributions,
make it possible to build the Amlogic GPIO IRQ controller as a module
by switching it to a platform driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210902134914.176986-2-narmstrong@baylibre.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105723.1831-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105715.1780-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105708.1729-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105701.1678-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210908105653.1627-1-caihuoqing@baidu.com
Geert reported that the GIC driver locks up on a Renesas system
since 005c34ae4b ("irqchip/gic: Atomically update affinity")
fixed the driver to use writeb_relaxed() instead of writel_relaxed().
As it turns out, the interconnect used on this system mandates
32bit wide accesses for all MMIO transactions, even if the GIC
architecture specifically mandates for some registers to be byte
accessible. Gahhh...
Work around the issue by crudly detecting the offending system,
and falling back to an inefficient RMW+lock implementation.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9HiQ@mail.gmail.com
This code works, but it is cleaner to use semicolons at the end of
statements instead of commas.
Extracted from a big anonymous patch by Julia Lawall
<julia.lawall@inria.fr>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/b1710bb6ea5faa7a7fe74404adb0beb951e0bf8c.1631699160.git.geert+renesas@glider.be
In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error,
there is an off-by-one in the number of VPEs to be freed.
Fix it by simply passing the number of VPEs allocated, which is the
index of the loop iterating over the VPEs.
Fixes: 7d75bbb4bc ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Kaige Fu <kaige.fu@linux.alibaba.com>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com
Fix kernel-doc warnings in irq-mbigen.c:
irq-mbigen.c:29: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* In mbigen vector register
irq-mbigen.c:43: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* offset of clear register in mbigen node
irq-mbigen.c:50: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* offset of interrupt type register
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jun Ma <majun258@huawei.com>
Cc: Yun Wu <wuyun.wu@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210905033644.15988-1-rdunlap@infradead.org
When converting the driver to using handle_percpu_devid_irq,
we forgot to repaint the irq_eoi() callback into irq_ack(),
as handle_percpu_devid_fasteoi_ipi() was actually using EOI
really early in the handling. Yes this was a stupid idea.
Fix this by using the HW ack method as irq_ack().
Fixes: e52e73b7e9 ("irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()")
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuiexq5f.fsf@pengutronix.de
* irq/qcom-pdc-nowake-cleanup:
: Fix the QCOM PDC mishandling of the interrupt hierarchy by trimming
: it when necessary.
: Export irq_domain_disconnect_hierarchy as a consequence of it.
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
Signed-off-by: Marc Zyngier <maz@kernel.org>
The QCOM PDC driver creates a bunch of unnecessary levels in
the interrupt hierarchy when dealing with non-wakeup-capable
interrupts. By definition, these lines are terminated at the
PDC level, and everything below this is completely fake.
This also results in additional complexity as most of the
callbacks have to check for the validity of the parent level.
Needless to say, this doesn't look very good.
Solve this by disconnecting the interrupt hierarchy below
the last valid level, and considerably simplify the handling
of all the other interrupts by avoiding now unnecessary cheks.
In most cases, the standard irq_*_parent() handlers are directly
used.
This also cures an issue reporting by Maulik where gpio_to_irq()
returns an error after having observed a set of invalid levels.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1629705880-27877-3-git-send-email-mkshah@codeaurora.org
* irq/misc-5.15:
: .
: Various irqchip fixes:
:
: - Fix edge interrupt support on loongson systems
: - Advertise lack of wake-up logic on mtk-sysirq
: - Fix mask tracking on the Apple AIC
: - Correct priority reading of arm64 pseudo-NMI when SCR_EL3.FIQ==0
: .
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
Signed-off-by: Marc Zyngier <maz@kernel.org>
When non-secure priorities are used, compared to the raw priority set,
the value read back from RPR is also right-shifted by one and the
highest bit set.
Add a macro to do the modifications to the raw priority when doing the
comparison against the RPR value. This corrects the pseudo-NMI behavior
when non-secure priorities in the GIC are used. Tested on 5.10 with
the "IPI as pseudo-NMI" series [1] applied on MT8195.
[1] https://lore.kernel.org/linux-arm-kernel/1604317487-14543-1-git-send-email-sumit.garg@linaro.org/
Fixes: 3367805909 ("irqchip/gic-v3: Support pseudo-NMIs when SCR_EL3.FIQ == 0")
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
[maz: Added comment contributed by Alex]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210811171505.1502090-1-wenst@chromium.org
When disable_irq_nosync for an interrupt is called from within its
interrupt handler, this interrupt is only marked as disabled with the
intention to mask it when it triggers again.
The AIC hardware however automatically masks the interrupt when it is read.
aic_irq_eoi then unmasks it again if it's not disabled *and* not masked.
This results in a state mismatch between the hardware state and the
state kept in irq_data: The hardware interrupt is masked but
IRQD_IRQ_MASKED is not set. Any further calls to unmask_irq will directly
return and the interrupt can never be enabled again.
Fix this by keeping the hardware and irq_data state in sync by unmasking in
aic_irq_eoi if and only if the irq_data state also assumes the interrupt to
be unmasked.
Fixes: 76cde26394 ("irqchip/apple-aic: Add support for the Apple Interrupt Controller")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210812100942.17206-1-sven@svenpeter.dev
- Fix edge interrupt support on loongson systems
- Advertise lack of wake-up logic on mtk-sysirq
* irq/misc-5.15:
irqchip/mtk-sysirq: Skip setting irq-wake
irqchip/loongson-pch-pic: Improve edge triggered interrupt support
Signed-off-by: Marc Zyngier <maz@kernel.org>
mtk-sysirq doesn't require specific logic to work with wakeup IRQs. To
allow registered IRQs to be used as a wakeup-source, add the flag
IRQCHIP_SKIP_SET_WAKE.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210707062004.782787-1-msp@baylibre.com
- Add support for partitionned EPPIs, modeled after the existing
partitioned PPI support
* irq/gicv3-eppi-partition:
irqchip/gic-v3: Fix selection of partition domain for EPPIs
irqchip/gic-v3: Add __gic_get_ppi_index() to find the PPI number from hwirq
Signed-off-by: Marc Zyngier <maz@kernel.org>
commit 5f51f80382 ("irqchip/gic-v3: Add EPPI range support") added
GIC_IRQ_TYPE_PARTITION support for EPPI to gic_irq_domain_translate(),
and commit 52085d3f20 ("irqchip/gic-v3: Dynamically allocate PPI
partition descriptors") made the gic_data.ppi_descs array big enough for
EPPI, but neither gic_irq_domain_select() nor partition_domain_translate()
were updated.
This means partitions are created by partition_create_desc() for the
EPPI range, but can't be registered as they will always match the root
domain and map to the summary interrupt.
Update gic_irq_domain_select() to match PPI and EPPI. The fwspec for
PPI and EPPI both start from 0. Use gic_irq_domain_translate() to find
the hwirq from the fwspec, then convert this to a ppi index.
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210729172748.28841-3-james.morse@arm.com
gic_get_ppi_index() is a useful concept for ppi partitions, as the GIC
has two PPI ranges but needs mapping to a single range when used as an
index in the gic_data.ppi_descs[] array.
Add a double-underscore version which takes just the intid. This will
be used in the partition domain select and translate helpers to enable
partition support for the EPPI range.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210729172748.28841-2-james.morse@arm.com
Edge-triggered mode and level-triggered mode need different handlers,
and edge-triggered mode need a specific ack operation. So improve it.
Fixes: ef8c01eb64 ("irqchip: Add Loongson PCH PIC controller")
Signed-off-by: Chen Zhu <zhuchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210805132216.3539007-1-chenhuacai@loongson.cn
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-7-andriy.shevchenko@linux.intel.com
Switch to devm_bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-6-andriy.shevchenko@linux.intel.com
Switch to devm_bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-5-andriy.shevchenko@linux.intel.com
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-4-andriy.shevchenko@linux.intel.com
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-3-andriy.shevchenko@linux.intel.com
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618151657.65305-2-andriy.shevchenko@linux.intel.com
