Use chacha20_crypt() instead of chacha_crypt(), since it's not really
appropriate for users of the ChaCha library API to be passing the number
of rounds as an argument.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reimplement the library routines to perform chacha20poly1305 en/decryption
on scatterlists, without [ab]using the [deprecated] blkcipher interface,
which is rather heavyweight and does things we don't really need.
Instead, we use the sg_miter API in a novel and clever way, to iterate
over the scatterlist in-place (i.e., source == destination, which is the
only way this library is expected to be used). That way, we don't have to
iterate over two scatterlists in parallel.
Another optimization is that, instead of relying on the blkcipher walker
to present the input in suitable chunks, we recognize that ChaCha is a
streamcipher, and so we can simply deal with partial blocks by keeping a
block of cipherstream on the stack and use crypto_xor() to mix it with
the in/output.
Finally, we omit the scatterwalk_and_copy() call if the last element of
the scatterlist covers the MAC as well (which is the common case),
avoiding the need to walk the scatterlist and kmap() the page twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This incorporates the chacha20poly1305 from the Zinc library, retaining
the library interface, but replacing the implementation with calls into
the code that already existed in the kernel's crypto API.
Note that this library API does not implement RFC7539 fully, given that
it is limited to 64-bit nonces. (The 96-bit nonce version that was part
of the selftest only has been removed, along with the 96-bit nonce test
vectors that only tested the selftest but not the actual library itself)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Arnd reports that the 32-bit generic library code for Curve25119 ends
up using an excessive amount of stack space when built with Clang:
lib/crypto/curve25519-fiat32.c:756:6: error: stack frame size
of 1384 bytes in function 'curve25519_generic'
[-Werror,-Wframe-larger-than=]
Let's give some hints to the compiler regarding which routines should
not be inlined, to prevent it from running out of registers and spilling
to the stack. The resulting code performs identically under both GCC
and Clang, and makes the warning go away.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This contains two formally verified C implementations of the Curve25519
scalar multiplication function, one for 32-bit systems, and one for
64-bit systems whose compiler supports efficient 128-bit integer types.
Not only are these implementations formally verified, but they are also
the fastest available C implementations. They have been modified to be
friendly to kernel space and to be generally less horrendous looking,
but still an effort has been made to retain their formally verified
characteristic, and so the C might look slightly unidiomatic.
The 64-bit version comes from HACL*: https://github.com/project-everest/hacl-star
The 32-bit version comes from Fiat: https://github.com/mit-plv/fiat-crypto
Information: https://cr.yp.to/ecdh.html
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ardb: - move from lib/zinc to lib/crypto
- replace .c #includes with Kconfig based object selection
- drop simd handling and simplify support for per-arch versions ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The C implementation was originally based on Samuel Neves' public
domain reference implementation but has since been heavily modified
for the kernel. We're able to do compile-time optimizations by moving
some scaffolding around the final function into the header file.
Information: https://blake2.net/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move from lib/zinc to lib/crypto
- remove simd handling
- rewrote selftest for better coverage
- use fixed digest length for blake2s_hmac() and rename to
blake2s256_hmac() ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for
MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been
contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken
straight from this upstream GitHub repository [0] at commit
d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes
required to build it as part of a Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
project. The file 'poly1305-armv4.pl' is taken straight from this upstream
GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f,
and already contains all the changes required to build it as part of a
Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation
for NEON authored by Andy Polyakov, and contributed by him to the OpenSSL
project. The file 'poly1305-armv8.pl' is taken straight from this upstream
GitHub repository [0] at commit ec55a08dc0244ce570c4fc7cade330c60798952f,
and already contains all the changes required to build it as part of a
Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement the arch init/update/final Poly1305 library routines in the
accelerated SIMD driver for x86 so they are accessible to users of
the Poly1305 library interface as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the existing generic Poly1305 code via a init/update/final
library interface so that callers are not required to go through
the crypto API's shash abstraction to access it. At the same time,
make some preparations so that the library implementation can be
superseded by an accelerated arch-specific version in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the core Poly1305 routines shared between the generic Poly1305
shash driver and the Adiantum and NHPoly1305 drivers into a separate
library so that using just this pieces does not pull in the crypto
API pieces of the generic Poly1305 routine.
In a subsequent patch, we will augment this generic library with
init/update/final routines so that Poyl1305 algorithm can be used
directly without the need for using the crypto API's shash abstraction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.
In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.
So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of introducing a set of crypto library interfaces, tidy
up the Makefile and split off the Kconfig symbols into a separate file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lib/crypto/sha256.c and include/crypto/sha256_base.h define
99% identical functions to init a sha256_state struct for sha224 or
sha256 use.
This commit moves the functions from lib/crypto/sha256.c to
include/crypto/sha.h (making them static inline) and makes the
sha224/256_base_init static inline functions from
include/crypto/sha256_base.h wrappers around the now also
static inline include/crypto/sha.h functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic sha256 implementation from lib/crypto/sha256.c uses data
structs defined in crypto/sha.h, so lets move the function prototypes
there too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lib/crypto/sha256.c / lib/crypto/libsha256.o may end up being a module,
so it needs a MODULE_LICENSE() line, add this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add sha224 support to the lib/crypto/sha256 library code. This will allow
us to replace both the sha256 and sha224 parts of crypto/sha256_generic.c
when we remove the code duplication in further patches in this series.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:
* Export interesting symbols
* Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use get/put_unaligned_be32 in lib/crypto/sha256.c to load / store data
so that it can be used with unaligned buffers too, making it more generic.
And use memzero_explicit for better clearing of sensitive data.
Note unlike other patches in this series this commit actually makes
functional changes to the sha256 code as used by the purgatory code.
This fully aligns the lib/crypto/sha256.c sha256 implementation with the
one from crypto/sha256_generic.c allowing us to remove the latter in
further patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Generic crypto implementations belong under lib/crypto not directly in
lib, likewise the header should be in include/crypto, not include/linux.
Note that the code in lib/crypto/sha256.c is not yet available for
generic use after this commit, it is still only used by the s390 and x86
purgatory code. Making it suitable for generic use is done in further
patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another one for the cipher museum: split off DES core processing into
a separate module so other drivers (mostly for crypto accelerators)
can reuse the code without pulling in the generic DES cipher itself.
This will also permit the cipher interface to be made private to the
crypto API itself once we move the only user in the kernel (CIFS) to
this library interface.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add inline helper function to check key length for AES algorithms.
The key can be 128, 192 or 256 bits size.
This function is used in the generic aes implementation.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a few copies of the AES S-boxes floating around, so export
the ones from the AES library so that we can reuse them in other
modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Take the existing small footprint and mostly time invariant C code
and turn it into a AES library that can be used for non-performance
critical, casual use of AES, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits (e.g., in hard interrupts taken from kernel
context)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor the core rc4 handling so we can move most users to a library
interface, permitting us to drop the cipher interface entirely in a
future patch. This is part of an effort to simplify the crypto API
and improve its robustness against incorrect use.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
