Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPIAOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn80gCgybzMp0YnSildFetSC8lUJTnzjQcAn3KWzb75
Zt72jxGl4ZOXHEpozG4O
=FLrK
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
"Here is the big set of USB, Thunderbolt, and PHY driver updates for
6.6-rc1. Included in here are:
- PHY driver additions and cleanups
- Thunderbolt minor additions and fixes
- USB MIDI 2 gadget support added
- dwc3 driver updates and additions
- Removal of some old USB wireless code that was missed when that
codebase was originally removed a few years ago, cleaning up some
core USB code paths
- USB core potential use-after-free fixes that syzbot from different
people/groups keeps tripping over
- typec updates and additions
- gadget fixes and cleanups
- loads of smaller USB core and driver cleanups all over the place
Full details are in the shortlog. All of these have been in linux-next
for a while with no reported problems"
* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
platform/chrome: cros_ec_typec: Configure Retimer cable type
tcpm: Avoid soft reset when partner does not support get_status
usb: typec: tcpm: reset counter when enter into unattached state after try role
usb: typec: tcpm: set initial svdm version based on pd revision
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
usb: dwc2: add pci_device_id driver_data parse support
usb: gadget: remove max support speed info in bind operation
usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
usb: gadget: config: remove max speed check in usb_assign_descriptors()
usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
usb: gadget: add a inline function gether_bitrate()
usb: gadget: use working speed to calcaulate network bitrate and qlen
dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
usb: dwc3: exynos: Add support for Exynos850 variant
usb: gadget: udc-xilinx: fix incorrect type in assignment warning
usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
USB: dwc2: hande irq on dead controller correctly
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
=eJz5
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
Here are the USB-serial updates for 6.6-rc1, including:
- support for the RS485 mode of XR devices
- new modem device ids
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZOsrJgAKCRALxc3C7H1l
CHm0AP9djQISOdmrSvZ8XWH6uDn9QGeA3BFgF7c3hCkHW4oKlQEArKbBw1LlPfkU
7gumA9af7BsqTPkta9b5bHOypa8v5Q8=
=fdUQ
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 6.6-rc1
Here are the USB-serial updates for 6.6-rc1, including:
- support for the RS485 mode of XR devices
- new modem device ids
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add FOXCONN T99W368/T99W373 product
USB: serial: option: add Quectel EM05G variant (0x030e)
USB: serial: xr: add TIOCGRS485 and TIOCSRS485 ioctls
The try_src_count and try_snk_count may still be 1 after enter into
unattached state. This may be caused by below case:
- SNK_TRY->SNK_TRY_WAIT->SRC_TRYWAIT->SNK_UNATTACHED
- SRC_TRY->SRC_TRY_WAIT->SNK_TRYWAIT->SNK_UNATTACHED
The port->attached is not true at the end and tcpm_reset_port() will not
be called. This will reset counter into for these cases, otherwise the tcpm
won't try role when new cable attached.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230820151518.1403006-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending Discover Identity messages to a Port Partner that uses Power
Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0,
expecting the port partner to respond with its highest supported SVDM
version as stated in Section 6.4.4.2.3 in the Power Delivery v3
specification. However, sending SVDM v2 to some Power Delivery v2 port
partners results in a NAK whereas sending SVDM v1 does not.
NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1),
and one solution could be to resend Discover Identity on a lower SVDM
version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK
response Should be taken as an indication not to retry that particular
Command."
Instead, we can set the SVDM version to the maximum one supported by the
negotiated PD revision. When operating in PD v2, this obeys Section
6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate
Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate
Version 2.0."
Fixes: c34e85fa69 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc2 driver has everything we need to run in PCI mode except
for pci_device_id driver_data parse. With that to set Loongson
dwc2 element and added identified as PCI_VENDOR_ID_LOONGSON
and PCI_DEVICE_ID_LOONGSON_DWC2 in dwc2_pci_ids, the Loongson
dwc2 controller will work.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230815065833.3375-1-zhuyinbo@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take ecm_bind() for example, it call gadget_is_{*}speed() API to show
gadget max support speed, it is not much help, remove the API usage here
is safe.
Similar change apply to acm,eem,loopback,ncm,obex,rndis,serial,
sourcesink,subset functions.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-8-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When call this function, gadget already have working speed, if it is
USB_SPEED_SUPER_PLUS, in theroy gadget_is_superspeed_plus() checking
should be true, so there is no need to call it. it is same for other
working speed.
Remove all gadget_is_{*}speed_plus() API call to clean it up.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-7-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_assign_descriptors() usally called inside function bind operation,
and gadget still have no working connection speed, let's support all
speed at this point, it may possible allocate extra memory to store
descriptors, but it is small and acceptable.
Remove gadget_is_{*}speed() API checking to allow support all speed.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-6-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take f_midi_bind() for example, when composite layer call it, it will
allocate hs descriptor by calling gadget_is_dualspeed() API to check
gadget max support speed capability, but most other gadget function didn't
do like this.
To follow other function drivers, it is safe to remove the check which
mean support all possible link speed by default in function driver.
Similar change apply to midi2 and uvc.
Also in midi and midi2, as there is no descriptor difference between
super speed and super speed plus, follow other gadget function drivers,
do not allocate descriptor for super speed plus, composite layer will
handle it properly.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-5-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when call uvc_function_bind(), gadget still have no connection speed,
just follow other gadget function, use fs endpoint descriptor to allocate
a video endpoint, remove gadget_is_{super|dual}speed() API call.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-4-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ecm_bitrate(), it is not support report bit rate for super
speed plus mode, but it can use same bit rate value defined in ncm and
rndis.
Add a common inline function gether_bitrate() which report different for
all possible speeds, it can be used by ecm, ncm and rndis, also remove
old function from them.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-3-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take ecm_bitrate() as example, it will be called after gadget device
link speed negotiation, consider code
if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER),
if a gadget device link speed is USB_SPEED_SUPER,
gadget_is_superspeed(g) must be true, or not it is a wrong
configuration of gadget max support speed.
Remove gadget_is_superspeed(g) checking should be safe, and remove other
similar operation in ncm, rndis, u_ether.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/20230803091053.9714-2-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Exynos850 compatible string and associated driver data. Only two
clocks are needed for this SoC:
- bus_early: bus clock needed for registers access
- ref: USB 2.0 DRD reference clock (50 MHz)
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-4-semen.protsenko@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bitwise attribute is used by the sparse utility to make sure the
variable is converted to the local processor type before other (unsafe)
operations are performed on the variable. Fix the below sparse warnings
type casted with __le16:
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype]
got restricted __le16 [usertype]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230822063201.16929-4-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the controller is dead, the honest answer to the
question whether it has caused an irq is: unknown
As the purpose of the irq return is to trigger switching
off an IRQ, the correct response if you cannot
determine if your device has caused the interrupt is
IRQ_HANDLED
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20230822112455.18957-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the serial device never reads data written to it (because it is "output
only") then the write buffers will still be waiting for the URB to complete
on close(), which will hang for 30s until the closing_wait timeout expires.
This can happen with the ESP32-H2/ESP32-C6 USB serial interface. Changing
the port closing_wait timeout is a privileged operation but flushing the
output buffer is not a privileged operation.
Implement the flush_buffer tty operation to cancel in-progress writes so
that tcflush(fd, TCOFLUSH) can be used to unblock the serial port before
close.
Signed-off-by: Simon Arlott <simon@octiron.net>
Link: https://lore.kernel.org/r/555fbc4c-043b-8932-fb9b-a208d61ffbe4@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current approach to handling DP on bridge-enabled platforms requires
a chain of DP bridges up to the USB-C connector. Register a last DRM
bridge for such chain.
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230817150824.14371-3-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the embedded cases, the DisplayPort connector is handled by the TCPM
itself. It was proposed to add the "displayport" OF property to the DT
bindings, but it was rejected in favour of properly describing the
electrical signal path using of_graph.
Fallback to the controller fwnode for HPD notifications to
support such usecases without requiring additional DT properties.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary platform_set_drvdata(..., NULL) in ->remove(),
the driver_data will be cleared in device_unbind_cleanup() after
calling ->remove() in driver call code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230810134710.114356-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dcd_change notification call moved outside of the acm->read_lock
to protect any future tty ldisc that calls wait_serial_change()
Signed-off-by: Dan Drown <dan-netdev@drown.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ZN1zV/zjPgpGlHXo@vps3.drown.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the module_led_trigger macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230815074648.1015175-1-lizetao1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device connected to usb otg port of GXL-based boards can not be
recognised after resumption, doesn't recover even if disconnect and
reconnect the device. dmesg shows it disconnects during resumption.
[ 41.492911] usb 1-2: USB disconnect, device number 3
[ 41.499346] usb 1-2: unregistering device
[ 41.511939] usb 1-2: unregistering interface 1-2:1.0
Calling usb_post_init() will fix this issue, and it's tested and
verified on libretech's aml-s905x-cc board.
Cc: stable@vger.kernel.org # v5.8+
Fixes: c99993376f ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Luke Lu <luke.lu@libre.computer>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230809212911.18903-1-luke.lu@libre.computer
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a "variable set but not used" warning in f_mass_storage.c. rc is
used if verbose debugging is enabled but not otherwise.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: d5e2b67aae ("USB: g_mass_storage: template f_mass_storage.c file created")
Link: https://lore.kernel.org/r/cfed16c7-aa46-494b-ba84-b0e0dc99be3a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 85d07c5562 ("USB: core: Unite old scheme and new scheme
descriptor reads") altered the way USB devices are enumerated
following detection, and in the process it messed up the
initialization of SuperSpeed (or faster) devices:
[ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[ 31.663107] usb 2-1: device descriptor read/8, error -71
[ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd
[ 31.965122] usb 2-1: device descriptor read/8, error -71
[ 32.080991] usb usb2-port1: attempt power cycle
...
The problem was caused by the commit forgetting that in SuperSpeed or
faster devices, the device descriptor uses a logarithmic encoding of
the bMaxPacketSize0 value. (For some reason I thought the 255 case in
the switch statement was meant for these devices, but it isn't -- it
was meant for Wireless USB and is no longer needed.)
We can fix the oversight by testing for buf->bMaxPacketSize0 = 9
(meaning 512, the actual maxpacket size for ep0 on all SuperSpeed
devices) and straightening out the logic that checks and adjusts our
initial guesses of the maxpacket value.
Reported-and-tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20230810002257.nadxmfmrobkaxgnz@synopsys.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 85d07c5562 ("USB: core: Unite old scheme and new scheme descriptor reads")
Link: https://lore.kernel.org/r/8809e6c5-59d5-4d2d-ac8f-6d106658ad73@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If initially isoc_count = 0, periodic_count > 0 and the io watchdog is
not started (e.g. just timed out), then the io watchdog may not run after
submitting isoc urbs and enable_periodic(). The isoc urbs may not complete
forever if the controller had already stopped periodic schedule.
This will try to call turn_on_io_watchdog() for each enable_periodic() to
ensure the io watchdog functions properly.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230809065327.952368-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230809085348.2761782-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. Remove of_match_ptr() and CONFIG_OF.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230809084849.2410477-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wireless USB has long been defunct, and kernel support for it was
removed in 2020 by commit caa6772db4 ("Staging: remove wusbcore and
UWB from the kernel tree.").
Nevertheless, some vestiges of the old implementation still clutter up
the USB subsystem and one or two other places. Let's get rid of them
once and for all.
The only parts still left are the user-facing APIs in
include/uapi/linux/usb/ch9.h. (There are also a couple of misleading
instances, such as the Sierra Wireless USB modem, which is a USB modem
made by Sierra Wireless.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/b4f2710f-a2de-4fb0-b50f-76776f3a961b@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NXP processors using ChipIdea USB IP have a bug when frame babble is
detected.
Issue description:
In USB camera test, our controller is host in HS mode. In ISOC IN, when
device sends data across the micro frame, it causes the babble in host
controller. This will clear the PE bit. In spec, it also requires to set
the PEC bit and then set the PCI bit. Without the PCI interrupt, the
software does not know the PE is cleared.
This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted
platform datas. And the ehci host driver will assert PEC by SW when
specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NXP processor using chipidea IP has a bug when frame babble is
detected.
As per 4.15.1.1.1 Serial Bus Babble:
A babble condition also exists if IN transaction is in progress at
High-speed SOF2 point. This is called frame babble. The host controller
must disable the port to which the frame babble is detected.
The USB controller has disabled the port (PE cleared) and has asserted
USBERRINT when frame babble is detected, but PEC is not asserted.
Therefore, the SW isn't aware that port has been disabled. Then the
SW keeps sending packets to this port, but all of the transfers will
fail.
This workaround will firstly assert PCD by SW when USBERRINT is detected
and then judge whether port change has really occurred or not by polling
roothub status. Because the PEC doesn't get asserted in our case, this
patch will also assert it by SW when specific conditions are satisfied.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors():
BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011
CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
...
Allocated by task 758:
...
__do_kmalloc_node mm/slab_common.c:966 [inline]
__kmalloc+0x5e/0x190 mm/slab_common.c:979
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:680 [inline]
usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887
usb_enumerate_device drivers/usb/core/hub.c:2407 [inline]
usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545
As analyzed by Khazhy Kumykov, the cause of this bug is a race between
read_descriptors() and hub_port_init(): The first routine uses a field
in udev->descriptor, not expecting it to change, while the second
overwrites it.
Prior to commit 45bf39f8df ("USB: core: Don't hold device lock while
reading the "descriptors" sysfs file") this race couldn't occur,
because the routines were mutually exclusive thanks to the device
locking. Removing that locking from read_descriptors() exposed it to
the race.
The best way to fix the bug is to keep hub_port_init() from changing
udev->descriptor once udev has been initialized and registered.
Drivers expect the descriptors stored in the kernel to be immutable;
we should not undermine this expectation. In fact, this change should
have been made long ago.
So now hub_port_init() will take an additional argument, specifying a
buffer in which to store the device descriptor it reads. (If udev has
not yet been initialized, the buffer pointer will be NULL and then
hub_port_init() will store the device descriptor in udev as before.)
This eliminates the data race responsible for the out-of-bounds read.
The changes to hub_port_init() appear more extensive than they really
are, because of indentation changes resulting from an attempt to avoid
writing to other parts of the usb_device structure after it has been
initialized. Similar changes should be made to the code that reads
the BOS descriptor, but that can be handled in a separate patch later
on. This patch is sufficient to fix the bug found by syzbot.
Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Khazhy Kumykov <khazhy@google.com>
Fixes: 45bf39f8df ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
