Commit Graph

59 Commits

Author SHA1 Message Date
Alexander Gordeev
f220baad08 ntb: Use pci_enable_msix_range() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:59:20 -07:00
Alexander Gordeev
53a788a765 ntb: Split ntb_setup_msix() into separate BWD/SNB routines
This is an cleanup effort to make ntb_setup_msix() more
readable - use ntb_setup_bwd_msix() to init MSI-Xs on
BWD hardware and ntb_setup_snb_msix() - on SNB hardware.

Function ntb_setup_snb_msix() also initializes MSI-Xs the
way it should has been done - looping pci_enable_msix()
until success or failure.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:59:19 -07:00
Alexander Gordeev
77733513c4 ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:59:19 -07:00
Jon Mason
53ca4fea0b NTB: Code Style Clean-up
Some white space and 80 char overruns corrected.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:59:19 -07:00
Jon Mason
403c63cb6d NTB: client event cleanup
Provide a better event interface between the client and transport

Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:59:19 -07:00
Alexander Gordeev
717e8e8bfe ntb: Fix leakage of ntb_device::msix_entries[] array
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:58:14 -07:00
Roland Dreier
c8eee3795d NTB: Fix typo in setting one translation register
In the code for Xeon devices in back-to-back mode with xeon_errata_workaround
disabled, the downstream device puts the wrong value in SNB_B2B_XLAT_OFFSETL
(SNB_MBAR01_DSD_ADDR vs. SNB_MBAR01_USD_ADDR).

This was spotted while reading code, since the typo has no practical effect,
at least for now: the low 32 bits of both constants are actually identical
anyway.  However, it's clearer and safer to use the right name.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-04-07 10:58:14 -07:00
Linus Torvalds
b95485143b NTB driver bug fixes to address a missed call to pci_enable_msix,
NTB-RP Link Up issue, Xeon Doorbell errata workaround, ntb_transport
 link down race, and correct dmaengine_get/put usage.  Also, clean-ups
 to remove duplicate defines and document a hardware errata.  Finally,
 some changes to improve performance.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSj/dCAAoJEG5mS6x6i9IjCfAP/0pVA7VYAjQQGLtpUIf8RNIe
 iNV58Q3h74+CSzyHkz51HYuJB+6uRC6c0ChKuZMUZk/ca3hqfW0FcC1V3SjYLzxP
 Bdf687TaEE4WJOaTI5hnAzzDQ+gU9aE4DgaqvFz43M4jh4scSleuE+CQ0Pjm682x
 71KespuPO7Z77EC5QPbWWV5KRSkF4FHuAuDcr8TYAmSnCb8VDGDxdnwYYwBTeY3j
 DuPUwLGwvbE6X4gWmOYZSwDz6cArEs1CunpeP3EUFY4rjTZArc4MSLWdC6lYQtZp
 T90khUDU/UklUqlOOuydJe30zT60uPBagcEL94JxyWFT+wa5b/ra+gvU+FE4NBzA
 ZW6LVlXnYTQ5XJeO5HNDRBHPZ3zZaDI+TGDBM13EBS0wbcO3PojR6Z78nlkjPLeJ
 /a1sIEfM3ts7u3Vpw8GpBbhl6+8tP6xbV/rDbzfE6mfq/VVwbfAa/k9oQVh8pfoJ
 YyGq1Gr43aAFm0imPRF0qRNDnSDF2UiYrNHntWWyfhW7Vmq/EjT0H21AHhgxnP7b
 3AaKQl7nuYoNzx6x8ZiEcSkDy+8qY84i2vUzd9Qll/SBVCOK7KvBoFmu9x7D+ZdN
 0mS4qFNXSmHhow7ur2ffwzIaSkggVIhLbEiH4bYbPP+wXzhlTLTnnRb3lFmTs/5X
 /HTR7QGxfDAzcjpYAzlS
 =nOG2
 -----END PGP SIGNATURE-----

Merge tag 'ntb-3.13' of git://github.com/jonmason/ntb

Pull non-transparent bridge updates from Jon Mason:
 "NTB driver bug fixes to address a missed call to pci_enable_msix,
  NTB-RP Link Up issue, Xeon Doorbell errata workaround, ntb_transport
  link down race, and correct dmaengine_get/put usage.

  Also, clean-ups to remove duplicate defines and document a hardware
  errata.  Finally, some changes to improve performance"

* tag 'ntb-3.13' of git://github.com/jonmason/ntb:
  NTB: Disable interrupts and poll under high load
  NTB: Enable Snoop on Primary Side
  NTB: Document HW errata
  NTB: remove duplicate defines
  NTB: correct dmaengine_get/put usage
  NTB: Fix ntb_transport link down race
  ntb: Fix missed call to pci_enable_msix()
  NTB: Fix NTB-RP Link Up
  NTB: Xeon Doorbell errata workaround
2013-11-26 11:15:12 -08:00
Jon Mason
e8aeb60c38 NTB: Disable interrupts and poll under high load
Disable interrupts and poll under high load

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:34 -07:00
Jon Mason
78958433db NTB: Enable Snoop on Primary Side
Enable Snoop from Primary to Secondary side on BAR23 and BAR45 on all
TLPs.  Previously, Snoop was only enabled from Secondary to Primary
side.  This can have a performance improvement on some workloads.

Also, make the code more obvious about how the link is being enabled.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:33 -07:00
Jon Mason
58b889206e NTB: Document HW errata
Add a comment describing the necessary ordering of modifications to the
NTB Limit and Base registers.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:33 -07:00
Michael Opdenacker
dcf81964e1 NTB: remove duplicate defines
Remove duplicate defines in drivers/ntb/ntb_regs.h

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:33 -07:00
Jon Mason
94681194e6 NTB: correct dmaengine_get/put usage
dmaengine_get() causes the initialization of the per-cpu channel tables.
It needs to be called prior to dma_find_channel().

Initial version by Dan Williams <dan.j.williams@intel.com>

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:32 -07:00
Jon Mason
fca4d5188c NTB: Fix ntb_transport link down race
A WARN_ON is being hit in ntb_qp_link_work due to the NTB transport link
being down while the ntb qp link is still active.  This is caused by the
transport link being brought down prior to the qp link worker thread
being terminated.  To correct this, shutdown the qp's prior to bringing
the transport link down.  Also, only call the qp worker thread if it is
in interrupt context, otherwise call the function directly.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:32 -07:00
Alexander Gordeev
9739047380 ntb: Fix missed call to pci_enable_msix()
Current MSI-X enablement code assumes MSI-Xs were successfully
allocated in case less than requested vectors were available.
That assumption is wrong, since MSI-Xs should be enabled with
a repeated call to pci_enable_msix(). This update fixes this.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:31 -07:00
Jon Mason
9fec60c414 NTB: Fix NTB-RP Link Up
The Xeon NTB-RP setup, the transparent side does not get a link up/down
interrupt.  Since the presence of a NTB device on the transparent side
means that we have a NTB link up, we can work around the lack of an
interrupt by simply calling the link up function to notify the upper
layers.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:31 -07:00
Jon Mason
c529aa3033 NTB: Xeon Doorbell errata workaround
Modifications to the 14th bit of the B2BDOORBELL register will not be
mirrored to the remote system due to a hardware issue.  To get around
the issue, shrink the number of available doorbell bits by 1.  The max
number of doorbells was being used as a way to referencing the Link
Doorbell bit.  Since this would no longer work, the driver must now
explicitly reference that bit.

This does not affect the xeon_errata_workaround case, as it is not using
the b2bdoorbell register.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:30 -07:00
Bartlomiej Zolnierkiewicz
0776ae7b89 dmaengine: remove DMA unmap flags
Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Bartlomiej Zolnierkiewicz
6f57fd0578 NTB: convert to dmaengine_unmap_data
Use the generic unmap object to unmap dma buffers.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
[djbw: fix up unmap len, and GFP flags]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:01:32 -08:00
Yijing Wang
73f47cadfe ntb: clean up unnecessary MSI/MSI-X capability find
PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX).
Access to PCIe device config space again will consume more time.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:01 -07:00
Jon Mason
db3bb3f07e NTB: Update Version
Update NTB version to 1.0

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:00 -07:00
Jon Mason
f9a2cf890b NTB: Comment Fix
Add "data" ntb_register_db_callback parameter description comment and
correct poor spelling.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:00 -07:00
Jon Mason
3daa3a073e NTB: Remove unused variable
Remove unused pci_dev variable from ntb_transport_free()

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:59 -07:00
Jon Mason
b1ef004303 NTB: Remove References of non-B2B BWD HW
NTB-RP is not a supported configuration on BWD hardware.  Remove the
code attempting to set it up.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:59 -07:00
Jon Mason
ed6c24eda9 NTB: NTB-RP support
Add support for Non-Transparent Bridge connected to a PCI-E Root Port on
the remote system (also known as NTB-RP mode).  This allows for a NTB
enabled system to be connected to a non-NTB enabled system/slot.

Modifications to the registers and BARs/MWs on the Secondary side by the
remote system are reflected into registers on the Primary side for the
local system.  Similarly, modifications of registers and BARs/MWs on
Primary side by the local system are reflected into registers on the
Secondary side for the Remote System.  This allows communication between
the 2 sides via these registers and BARs/MWs.

Note: there is not a fix for the Xeon Errata (that was already worked
around in NTB-B2B mode) for NTB-RP mode.  Due to this limitation, NTB-RP
will not work on the Secondary side with the Xeon Errata workaround
enabled.  To get around this, disable the workaround via the
xeon_errata_workaround=0 modparm.  However, this can cause the hang
described in the errata.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:58 -07:00
Jon Mason
497938890a NTB: Rename Variables for NTB-RP
Many variable names in the NTB driver refer to the primary or secondary
side.  However, these variables will be used to access the reverse case
when in NTB-RP mode.  Make these names more generic in anticipation of
NTB-RP support.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:58 -07:00
Jon Mason
282a2feeb9 NTB: Use DMA Engine to Transmit and Receive
Allocate and use a DMA engine channel to transmit and receive data over
NTB.  If none is allocated, fall back to using the CPU to transfer data.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
2013-09-05 11:04:09 -07:00
Jon Mason
ac477afb04 NTB: Enable 32bit Support
Correct the issues on NTB that prevented it from working on x86_32 and
modify the Kconfig to allow it to be permitted to be used in that
environment as well.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:53 -07:00
Jon Mason
be4dac0fca NTB: Update Device IDs
Add support for new Intel NTB devices on upcoming Xeon hardware.  Since
the Xeon hardware design is already in place in the driver, all that is
needed are the new device ids.

Remove the device IDs for NTB devs running in Transparent Bridge mode,
as this driver is not being used for those devices.

Rename the device IDs for NTB devs running in NTB-RP mode to better
identify their usage model.  "PS" to denote the Primary Side of NTB, and
"SS" to denote the secondary side.  The primary side is the interface
exposed to the local system, and the secondary side is the interface
exposed to the remote system.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:53 -07:00
Jon Mason
113bf1c9f1 NTB: BWD Link Recovery
The BWD NTB device will drop the link if an error is encountered on the
point-to-point PCI bridge.  The link will stay down until all errors are
cleared and the link is re-established.  On link down, check to see if
the error is detected, if so do the necessary housekeeping to try and
recover from the error and reestablish the link.

There is a potential race between the 2 NTB devices recovering at the
same time.  If the times are synchronized, the link will not recover and the
driver will be stuck in this loop forever.  Add a random interval to the
recovery time to prevent this race.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:52 -07:00
Jon Mason
948d3a65b6 NTB: Xeon Errata Workaround
There is a Xeon hardware errata related to writes to SDOORBELL or
B2BDOORBELL in conjunction with inbound access to NTB MMIO Space, which
may hang the system.  To workaround this issue, use one of the memory
windows to access the interrupt and scratch pad registers on the remote
system.  This bypasses the issue, but removes one of the memory windows
from use by the transport.  This reduction of MWs necessitates adding
some logic to determine the number of available MWs.

Since some NTB usage methodologies may have unidirectional traffic, the
ability to disable the workaround via modparm has been added.

See BF113 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-c5500-c3500-spec-update.pdf
See BT119 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-family-spec-update.pdf

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 13:51:51 -07:00
Jon Mason
1517a3f21a NTB: Correct debugfs to work with more than 1 NTB Device
Debugfs was setup in NTB to only have a single debugfs directory.  This
resulted in the leaking of debugfs directories and files when multiple
NTB devices were present, due to each device stomping on the variables
containing the previous device's values (thus preventing them from being
freed on cleanup).  Correct this by creating a secondary directory of
the PCI BDF for each device present, and nesting the previously existing
information in those directories.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:14:54 -07:00
Jon Mason
b6750cfe07 NTB: Correct USD/DSD Identification
Due to ambiguous documentation, the USD/DSD identification is backward
when compared to the setting in BIOS.  Correct the bits to match the
BIOS setting.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:14 -07:00
Jon Mason
8703451151 NTB: Correct Number of Scratch Pad Registers
The NTB Xeon hardware has 16 scratch pad registers and 16 back-to-back
scratch pad registers.  Correct the #define to represent this and update
the variable names to reflect their usage.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:13 -07:00
Jon Mason
3b12a0d15b NTB: Add Error Handling in ntb_device_setup
If an error is encountered in ntb_device_setup, it is possible that the
spci_cmd isn't populated.  Writes to the offset can result in a NULL
pointer dereference.  This issue is easily encountered by running in
NTB-RP mode, as it currently is not supported and will generate an
error.  To get around this issue, return if an error is encountered
prior to attempting to write to the spci_cmd offset.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:12 -07:00
Jon Mason
8b19d450ad
NTB: Multiple NTB client fix
Fix issue with adding multiple ntb client devices to the ntb virtual
bus.  Previously, multiple devices would be added with the same name,
resulting in crashes.  To get around this issue, add a unique number to
the device when it is added.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:22 -07:00
Jon Mason
c336acd333
NTB: memcpy lockup workaround
The system will appear to lockup for long periods of time due to the NTB
driver spending too much time in memcpy.  Avoid this by reducing the
number of packets that can be serviced on a given interrupt.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:06 -07:00
Jon Mason
c9d534c8cb
NTB: Correctly handle receive buffers of the minimal size
The ring logic of the NTB receive buffer/transmit memory window requires
there to be at least 2 payload sized allotments.  For the minimal size
case, split the buffer into two and set the transport_mtu to the
appropriate size.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:59 -07:00
Jon Mason
90f9e93464
NTB: reset tx_index on link toggle
If the NTB link toggles, the driver could stop receiving due to the
tx_index not being set to 0 on the transmitting size on a link-up event.
This is due to the driver expecting the incoming data to start at the
beginning of the receive buffer and not at a random place.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:51 -07:00
Jon Mason
b77b2637b3
NTB: Link toggle memory leak
Each link-up will allocate a new NTB receive buffer when the NTB
properties are negotiated with the remote system.  These allocations did
not check for existing buffers and thus did not free them.  Now, the
driver will check for an existing buffer and free it if not of the
correct size, before trying to alloc a new one.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:45 -07:00
Jon Mason
113fc505b8
NTB: Handle 64bit BAR sizes
64bit BAR sizes are permissible with an NTB device.  To support them
various modifications and clean-ups were required, most significantly
using 2 32bit scratch pad registers for each BAR.

Also, modify the driver to allow more than 2 Memory Windows.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:40 -07:00
Dan Carpenter
cc0f868d8a
NTB: fix pointer math issues
->remote_rx_info and ->rx_info are struct ntb_rx_info pointers.  If we
add sizeof(struct ntb_rx_info) then it goes too far.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:29 -07:00
Dan Carpenter
ad3e2751e7
ntb: off by one sanity checks
These tests are off by one.  If "mw" is equal to NTB_NUM_MW then we
would go beyond the end of the ndev->mw[] array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:24 -07:00
Jon Mason
186f27ff9f
NTB: variable dereferenced before check
Correct instances of variable dereferencing before checking its value on
the functions exported to the client drivers.  Also, add sanity checks
for all exported functions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:17 -07:00
Jon Mason
74465645cd NTB: Fix Sparse Warnings
Address the sparse warnings and resulting fallout

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:34:21 -08:00
Jon Mason
719234f944 NTB: disable x86_32 support
Atomic readq and writeq do not exist by default on some 32bit
architectures, thus causing compile errors due to non-existent symbols.
Since NTB has not been tested 32bit, disable x86_32 support until such
time as this and any other issues can be properly discovered.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:34:21 -08:00
Jon Mason
50228c5505 NTB: Update Version
Update NTB version to 0.25

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:48:13 -08:00
Jon Mason
448c6fb3a3 NTB: Out of free receive entries issue
If the NTB client driver enqueues the maximum number of rx buffers, it
will not be able to re-enqueue another in its callback handler due to a
lack of free entries.  This can be avoided by adding the current entry
to the free queue prior to calling the client callback handler.  With
this change, ntb_netdev will no longer encounter a rx error on its first
packet.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:52 -08:00
Jon Mason
793c20e9c9 NTB: Remove reads across NTB
CPU reads across NTB are slow(er) and can hang the local system if an
ECC error is encountered on the remote.  To work around the need for a
read, have the remote side write its current position in the rx buffer
to the local system's buffer and use that to see if there is room when
transmitting.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason
d7237e22bb NTB: correct stack usage warning in debugfs_read
Correct gcc warning of using too much stack debugfs_read.  This is done
by kmallocing the buffer instead of using the char array on stack.
Also, shrinking the buffer to something closer to what is currently
being used.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00