Support `MITIGATION_SLS` by enabling the target features that Clang does.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...next_up+0x44: missing int3 after ret
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [1].
Link: https://github.com/rust-lang/rust/issues/116851 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_RETPOLINE` by enabling the target features that
Clang does.
The existing target feature being enabled was a leftover from
our old `rust` branch, and it is not enough: the target feature
`retpoline-external-thunk` only implies `retpoline-indirect-calls`, but
not `retpoline-indirect-branches` (see LLVM's `X86.td`), unlike Clang's
flag of the same name `-mretpoline-external-thunk` which does imply both
(see Clang's `lib/Driver/ToolChains/Arch/X86.cpp`).
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...escape_default+0x13: indirect jump found in RETPOLINE build
In addition, change the comment to note that LLVM is the one disabling
jump tables when retpoline is enabled, thus we do not need to use
`-Zno-jump-tables` for Rust here -- see commit c58f2166ab39 ("Introduce
the "retpoline" x86 mitigation technique ...") [1]:
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional
branches and a small search tree. LLVM already has support for
lowering switches in this way and the first step of this patch is
to disable jump-table lowering of switches and introduce a pass to
rewrite explicit indirectbr sequences into a switch over integers.
As well as a live example at [2].
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [3].
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: c58f2166ab [1]
Link: https://godbolt.org/z/G4YPr58qG [2]
Link: https://github.com/rust-lang/rust/issues/116852 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked
in upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
-----BEGIN PGP SIGNATURE-----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=2uNw
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
- Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
upstream Rust for the upcoming 1.82.0).
- Fix support for the latest version of rust-analyzer due to a change
on rust-analyzer config file semantics (considered a fix since most
developers use the latest version of the tool, which is the only one
actually supported by upstream). I am discussing stability of the
config file with upstream -- they may be able to start versioning it.
- Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
libclang (bindgen).
- A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
suppress error messages in a foreign architecture chroot and to use a
proper default format.
- Clean 'rust-analyzer' target warning due to missing recursive make
invocation mark.
- Clean Clippy warning due to missing indentation in docs.
- Clean LLVM 19 build warning due to removed 3dnow feature upstream.
* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
rust: x86: remove `-3dnow{,a}` from target features
kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
rust: add intrinsics to fix `-Os` builds
kbuild: rust: skip -fmin-function-alignment in bindgen flags
rust: Support latest version of `rust-analyzer`
rust: macros: indent list item in `module!`'s docs
rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
Some pending overlay additions need the graph check fix.
This adds the following commits from upstream:
bcd02b523429 fdtoverlay: remove wrong singular article in a comment
84b056a89d3c checks: relax graph checks for overlays
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cleaning up the symbols causes various issues afterwards. Let's sort
the list based on original name.
Signed-off-by: Song Liu <song@kernel.org>
Fixes: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240807220513.3100483-2-song@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
As done with str_up_down(), add checks for str_down_up() opportunities.
5 cases currently exist in the tree.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240812183637.work.999-kees@kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
There are some issues in the test_fortify Makefile code.
Problem 1: cc-disable-warning invokes compiler dozens of times
To see how many times the cc-disable-warning is evaluated, change
this code:
$(call cc-disable-warning,fortify-source)
to:
$(call cc-disable-warning,$(shell touch /tmp/fortify-$$$$)fortify-source)
Then, build the kernel with CONFIG_FORTIFY_SOURCE=y. You will see a
large number of '/tmp/fortify-<PID>' files created:
$ ls -1 /tmp/fortify-* | wc
80 80 1600
This means the compiler was invoked 80 times just for checking the
-Wno-fortify-source flag support.
$(call cc-disable-warning,fortify-source) should be added to a simple
variable instead of a recursive variable.
Problem 2: do not recompile string.o when the test code is updated
The test cases are independent of the kernel. However, when the test
code is updated, $(obj)/string.o is rebuilt and vmlinux is relinked
due to this dependency:
$(obj)/string.o: $(obj)/$(TEST_FORTIFY_LOG)
always-y is suitable for building the log files.
Problem 3: redundant code
clean-files += $(addsuffix .o, $(TEST_FORTIFY_LOGS))
... is unneeded because the top Makefile globally cleans *.o files.
This commit fixes these issues and makes the code readable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240727150302.1823750-2-masahiroy@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
On macOS, as reported by Daniel Gomez, getline() sets ENOTTY to errno
if it is requested to read from /dev/null.
If this is worth fixing, I would rather pass an empty file to
scripts/kallsyms instead of adding the ugly #ifdef __APPLE__.
Fixes: c442db3f49 ("kbuild: remove PROVIDE() for kallsyms symbols")
Reported-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/all/20240807-macos-build-support-v1-12-4cd1ded85694@samsung.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove
support for 3DNow!, both intrinsics and builtins. (#96246)"):
Remove support for 3DNow!, both intrinsics and builtins. (#96246)
This set of instructions was only supported by AMD chips starting in
the K6-2 (introduced 1998), and before the "Bulldozer" family
(2011). They were never much used, as they were effectively superseded
by the more-widely-implemented SSE (first implemented on the AMD side
in Athlon XP in 2001).
This is being done as a predecessor towards general removal of MMX
register usage. Since there is almost no usage of the 3DNow!
intrinsics, and no modern hardware even implements them, simple
removal seems like the best option.
Thus we should avoid passing these to the backend, since otherwise we
get a diagnostic about it:
'-3dnow' is not a recognized feature for this target (ignoring feature)
'-3dnowa' is not a recognized feature for this target (ignoring feature)
We could try to disable them only up to LLVM 19 (not the C side one,
but the one used by `rustc`, which may be built with a range of
LLVMs). However, to avoid more complexity, we can likely just remove
them altogether. According to Nikita [2]:
> I don't think it's needed because LLVM should not generate 3dnow
> instructions unless specifically asked to, using intrinsics that
> Rust does not provide in the first place.
Thus do so, like Rust did for one of their builtin targets [3].
For those curious: Clang will warn only about trying to enable them
(`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so
there is no change needed there.
Cc: Nikita Popov <github@npopov.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: x86@kernel.org
Link: f0eb5587ce [1]
Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2]
Link: https://github.com/rust-lang/rust/pull/127864 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1094
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240806144558.114461-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Sets the `sysroot` field in rust-project.json which is now needed in
newer versions of rust-analyzer instead of the `sysroot_src` field.
Till [1] `rust-analyzer` used to guess the `sysroot` based on the
`sysroot_src` at [2]. Now `sysroot` is a required parameter for a
`rust-project.json` file. It is required because `rust-analyzer`
need it to find the proc-macro server [3].
In the current version of `rust-analyzer` the `sysroot_src` is only used
to include the inbuilt library crates (std, core, alloc, etc) [4]. Since
we already specify the core library to be included in the
`rust-project.json` we don't need to define the `sysroot_src`.
Code editors like VS Code try to use the latest version of rust-analyzer
(which is updated every week) instead of the version of rust-analyzer
that comes with the rustup toolchain (which is updated every six weeks
along with the rust version).
Without this change `rust-analyzer` is breaking for anyone using VS Code.
As they are getting the latest version of `rust-analyzer` with the
changes made in [1].
`rust-analyzer` will also start breaking for other developers as they
update their rust version (assuming that also updates the rust-analyzer
version on their system).
This patch should work with every setup as there is no more guess work
being done by `rust-analyzer`.
[ Lukas, who leads the rust-analyzer team, says:
`sysroot_src` is required now if you want to have the sysroot
source libraries be loaded. I think we used to infer it as
`{sysroot}/lib/rustlib/src/rust/library` before when only the
`sysroot` field was given but that was since changed to make it
possible in having a sysroot without the standard library sources
(that is only have the binaries available). So if you want the
library sources to be loaded by rust-analyzer you will have to set
that field as well now.
- Miguel ]
Link: https://github.com/rust-lang/rust-analyzer/pull/17287 [1]
Link: f372a8a117/crates/project-model/src/workspace.rs (L367-L374) [2]
Link: eeb192b79a/crates/project-model/src/sysroot.rs (L180-L192) [3]
Link: https://github.com/search?q=repo%3AVeykril%2Frust-analyzer%20src_root()&type=code [4]
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Sarthak Singh <sarthak.singh99@gmail.com>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/How.20to.20rust-analyzer.20correctly.20working
Link: https://lore.kernel.org/r/20240724172713.899399-1-sarthak.singh99@gmail.com
[ Formatted comment, fixed typo and removed spurious empty line. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The conversion from the old unistd.h file to syscall.tbl dropped the
nfsservctl macro. This one was handled inconsistently across architectures
in the original introduction of the syscall.tbl format, and I went the
other way on this.
The syscall was already gone in linux-3.1 before the current users
of the generic table (other than openrisc) first appeared, so nobody
could actally use it, but putting the number back helps for consistency
since there are build scripts that check the presence of all these
macros.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2301919
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When resolving a merge conflict, Linus noticed the fdtoverlay command
duplication introduced by commit 49636c5680 ("kbuild: verify dtoverlay
files against schema"). He suggested a clean-up.
I eliminated the duplication and refactored the code a little further.
No functional changes are intended, except for the short logs.
The log will look as follows:
$ make ARCH=arm64 defconfig dtbs_check
[ snip ]
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb
DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo
OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb
The tag [C] indicates that the schema check is executed.
Link: https://lore.kernel.org/lkml/CAHk-=wiF3yeWehcvqY-4X7WNb8n4yw_5t0H1CpEpKi7JMjaMfw@mail.gmail.com/#t
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The previous patch to fix the newfstatat() syscall entry ended up breaking
fstat() instead. Unfortunately these two are not handled the same way, so
I messed this one up the exact opposite way.
Fixes: 343416f0c1 ("syscalls: fix syscall macros for newfstat/newfstatat")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The __NR_newfstat and __NR_newfstatat macros accidentally got renamed
in the conversion to the syscall.tbl format, dropping the 'new' portion
of the name.
In an unrelated change, the two syscalls are no longer architecture
specific but are once more defined on all 64-bit architectures, so the
'newstat' ABI keyword can be dropped from the table as a simplification.
Fixes: Fixes: 4fe53bf2ba ("syscalls: add generic scripts/syscall.tbl")
Closes: https://lore.kernel.org/lkml/838053e0-b186-4e9f-9668-9a3384a71f23@app.fastmail.com/T/#t
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch 1) fixes all the issues (not most) reported by pylint,
2) add the functionability to tackle documents that need translation,
3) add logging to adjust the logging level and log file
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240719041400.3909775-2-dzm91@hust.edu.cn
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts, which
is an error with the latest Clang
-----BEGIN PGP SIGNATURE-----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=HYew
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers 3 stable Rust
releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow), plus beta,
plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we
will need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help promoting
the collaboration between Rust and the kernel.
[1] https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to 'alloc'
having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!' macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----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=8PYF
-----END PGP SIGNATURE-----
Merge tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"The highlight is the establishment of a minimum version for the Rust
toolchain, including 'rustc' (and bundled tools) and 'bindgen'.
The initial minimum will be the pinned version we currently have, i.e.
we are just widening the allowed versions. That covers three stable
Rust releases: 1.78.0, 1.79.0, 1.80.0 (getting released tomorrow),
plus beta, plus nightly.
This should already be enough for kernel developers in distributions
that provide recent Rust compiler versions routinely, such as Arch
Linux, Debian Unstable (outside the freeze period), Fedora Linux,
Gentoo Linux (especially the testing channel), Nix (unstable) and
openSUSE Slowroll and Tumbleweed.
In addition, the kernel is now being built-tested by Rust's pre-merge
CI. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it
passes. Similarly, the bindgen tool has agreed to build the kernel in
their CI too.
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust
compiler versions should generally work.
In addition, the Rust project has proposed getting the kernel into
stable Rust (at least solving the main blockers) as one of its three
flagship goals for 2024H2 [1].
I would like to thank Niko, Sid, Emilio et al. for their help
promoting the collaboration between Rust and the kernel.
Toolchain and infrastructure:
- Support several Rust toolchain versions.
- Support several bindgen versions.
- Remove 'cargo' requirement and simplify 'rusttest', thanks to
'alloc' having been dropped last cycle.
- Provide proper error reporting for the 'rust-analyzer' target.
'kernel' crate:
- Add 'uaccess' module with a safe userspace pointers abstraction.
- Add 'page' module with a 'struct page' abstraction.
- Support more complex generics in workqueue's 'impl_has_work!'
macro.
'macros' crate:
- Add 'firmware' field support to the 'module!' macro.
- Improve 'module!' macro documentation.
Documentation:
- Provide instructions on what packages should be installed to build
the kernel in some popular Linux distributions.
- Introduce the new kernel.org LLVM+Rust toolchains.
- Explain '#[no_std]'.
And a few other small bits"
Link: https://rust-lang.github.io/rust-project-goals/2024h2/index.html#flagship-goals [1]
* tag 'rust-6.11' of https://github.com/Rust-for-Linux/linux: (26 commits)
docs: rust: quick-start: add section on Linux distributions
rust: warn about `bindgen` versions 0.66.0 and 0.66.1
rust: start supporting several `bindgen` versions
rust: work around `bindgen` 0.69.0 issue
rust: avoid assuming a particular `bindgen` build
rust: start supporting several compiler versions
rust: simplify Clippy warning flags set
rust: relax most deny-level lints to warnings
rust: allow `dead_code` for never constructed bindings
rust: init: simplify from `map_err` to `inspect_err`
rust: macros: indent list item in `paste!`'s docs
rust: add abstraction for `struct page`
rust: uaccess: add typed accessors for userspace pointers
uaccess: always export _copy_[from|to]_user with CONFIG_RUST
rust: uaccess: add userspace pointers
kbuild: rust-analyzer: improve comment documentation
kbuild: rust-analyzer: better error handling
docs: rust: no_std is used
rust: alloc: add __GFP_HIGHMEM flag
rust: alloc: fix typo in docs for GFP_NOWAIT
...
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
-----BEGIN PGP SIGNATURE-----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=ybqq
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Support for preemption
- i386 Rust support
- Huge cleanup by Benjamin Berg
- UBSAN support
- Removal of dead code
* tag 'uml-for-linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (41 commits)
um: vector: always reset vp->opened
um: vector: remove vp->lock
um: register power-off handler
um: line: always fill *error_out in setup_one_line()
um: remove pcap driver from documentation
um: Enable preemption in UML
um: refactor TLB update handling
um: simplify and consolidate TLB updates
um: remove force_flush_all from fork_handler
um: Do not flush MM in flush_thread
um: Delay flushing syscalls until the thread is restarted
um: remove copy_context_skas0
um: remove LDT support
um: compress memory related stub syscalls while adding them
um: Rework syscall handling
um: Add generic stub_syscall6 function
um: Create signal stack memory assignment in stub_data
um: Remove stub-data.h include from common-offsets.h
um: time-travel: fix signal blocking race/hang
um: time-travel: remove time_exit()
...
semicolon separation in LC_ALL is wrong. Either variable needs to be
exported before as a separate commit or set as part of the commit in the
beginning. Used second variant.
This fixes broken build on user's locale setup which makes 'date' binary
to produce invalid characters in rpm changelog (e.g. cs_CZ.UTF-8 'čec'):
$ make binrpm-pkg
GEN rpmbuild/SPECS/kernel.spec
rpmbuild -bb rpmbuild/SPECS/kernel.spec --define='_topdirlinux/rpmbuild' \
--target x86_64-linux --build-in-place --noprep --define='_smp_mflags \
%{nil}' $(rpm -q rpm >/dev/null 2>&1 || echo --nodeps)
Building target platforms: x86_64-linux
Building for target x86_64-linux
error: bad date in %changelog: St čec 24 2024 user <user@somehost>
make[2]: *** [scripts/Makefile.package:71: binrpm-pkg] Error 1
make[1]: *** [linux/Makefile:1546: binrpm-pkg] Error 2
make: *** [Makefile:224: __sub-make] Error 2
Fixes: 301c10908e ("kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
Kuan-Wei Chiu has significantly reworked the min_heap library code and
has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally more
rational.
- Kuan-Wei Chiu has sent along some maintenance work against our sorting
library code in the series "lib/sort: Optimizations and cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB
command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2GvwAKCRDdBJ7gKXxA
jlf/AP48xP5ilIHbtpAKm2z+MvGuTxJQ5VSC0UXFacuCbc93lAEA+Yo+vOVRmh6j
fQF2nVKyKLYfSz7yqmCyAaHWohIYLgg=
=Stxz
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
The struct sym_entry uses the 'seq' and 'start_pos' fields to remember
the index in the symbol table. They serve the same purpose and are not
used simultaneously. Unify them.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit bea5b74504 ("kallsyms: expand symbol name into comment for
debugging") added the uncompressed type/name in the comment lines of
kallsyms_offsets.
It would be useful to do the same for kallsyms_names and
kallsyms_seqs_of_names.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
pacman is the package manager used by Arch Linux and its derivates.
Creating native packages from the kernel tree has multiple advantages:
* The package triggers the correct hooks for initramfs generation and
bootloader configuration
* Uninstallation is complete and also invokes the relevant hooks
* New UAPI headers can be installed without any manual bookkeeping
The PKGBUILD file is a modified version of the one used for the
downstream Arch Linux "linux" package.
Extra steps that should not be necessary for a development kernel have
been removed and an UAPI header package has been added.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Move array_size.h, hashtable.h, list.h, list_types.h from scripts/kconfig/
to scripts/include/.
These headers will be useful for other host programs.
Remove scripts/mod/list.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This prevents segfault when getting filename and lineno in recursive
checks.
If the following snippet is found in Kconfig:
[Test code 1]
config FOO
bool
depends on BAR
select BAR
... without BAR defined; then there is a segfault.
Kconfig:34:error: recursive dependency detected!
Kconfig:34: symbol FOO depends on BAR
make[4]: *** [scripts/kconfig/Makefile:85: allnoconfig] Segmentation fault
This is because of the following. BAR is a fake entry created by
sym_lookup() with prop being NULL. In the recursive check, there is a
NULL check for prop to fall back to stack->sym->prop if stack->prop is
NULL. However, in this case, stack->sym points to the fake BAR entry
created by sym_lookup(), so prop is still NULL. prop was then referenced
without additional NULL checks, causing segfault.
As the previous email thread suggests, the file and lineno for select is
also wrong:
[Test code 2]
config FOO
bool
config BAR
bool
config FOO
bool "FOO"
depends on BAR
select BAR
$ make defconfig
*** Default configuration is based on 'x86_64_defconfig'
Kconfig:1:error: recursive dependency detected!
Kconfig:1: symbol FOO depends on BAR
Kconfig:4: symbol BAR is selected by FOO
[...]
Kconfig:4 should be Kconfig:10.
This patch deletes the wrong and segfault-prone filename/lineno
inference completely. With this patch, Test code 1 yields:
error: recursive dependency detected!
symbol FOO depends on BAR
symbol BAR is selected by FOO
Signed-off-by: HONG Yifan <elsk@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fix the following rpmbuild warning:
$ make srcrpm-pkg
...
RPM build warnings:
source_date_epoch_from_changelog set but %changelog is missing
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
removed the last use of the absolute kallsyms.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20240221202655.2423854-1-jannh@google.com/
[masahiroy@kernel.org: rebase the code and reword the commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If INSTALL_PATH is not a valid directory, create it, like what
modules_install and dtbs_install will do in the same situation.
Signed-off-by: Zhang Bingwu <xtexchooser@duck.com>
Reviewed-by: Nicolas Schier <nicolas@jasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I do not think the macros 'e1' and 'e2' are readable.
The statement:
e1 = expr_alloc_symbol(...);
affects the caller's variable, but this is not sufficiently clear from the code.
Remove the macros. No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Remove support for 40x CPUs & platforms.
- Add support to the 64-bit BPF JIT for cpu v4 instructions.
- Fix PCI hotplug driver crash on powernv.
- Fix doorbell emulation for KVM on PAPR guests (nestedv2).
- Fix KVM nested guest handling of some less used SPRs.
- Online NUMA nodes with no CPU/memory if they have a PCI device attached.
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels.
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE.
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King,
Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani,
Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski,
Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm),
Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy
Pearson, Uwe Kleine-König, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=eHVd
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove support for 40x CPUs & platforms
- Add support to the 64-bit BPF JIT for cpu v4 instructions
- Fix PCI hotplug driver crash on powernv
- Fix doorbell emulation for KVM on PAPR guests (nestedv2)
- Fix KVM nested guest handling of some less used SPRs
- Online NUMA nodes with no CPU/memory if they have a PCI device
attached
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian
King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra,
Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna
Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler,
Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat,
Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and
Vaibhav Jain.
* tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits)
Documentation/powerpc: Mention 40x is removed
powerpc: Remove 40x leftovers
macintosh/therm_windtunnel: fix module unload.
powerpc: Check only single values are passed to CPU/MMU feature checks
powerpc/xmon: Fix disassembly CPU feature checks
powerpc: Drop clang workaround for builtin constant checks
powerpc64/bpf: jit support for signed division and modulo
powerpc64/bpf: jit support for sign extended mov
powerpc64/bpf: jit support for sign extended load
powerpc64/bpf: jit support for unconditional byte swap
powerpc64/bpf: jit support for 32bit offset jmp instruction
powerpc/pci: Hotplug driver bridge support
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC
powerpc: add missing MODULE_DESCRIPTION() macros
macintosh/mac_hid: add MODULE_DESCRIPTION()
KVM: PPC: add missing MODULE_DESCRIPTION() macros
powerpc/kexec: Use of_property_read_reg()
powerpc/64s/radix/kfence: map __kfence_pool at page granularity
powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API
...
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
Add sys_uretprobe entry to scripts/syscall.tbl as same as
arch/x86/entry/syscalls/syscall_64.tbl.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240719102824.1e086a40@canb.auug.org.au/
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given translation was
last updated.
- A couple of "best practices" suggestions (on Link: tags and off-list
discussions) that were not entirely at consensus level, but I concluded
they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters that have
not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmaZbLMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y7PkH/jk1LverE9XOXZO5Uq+eEwWlNI2khjQ0hI+M
b0GZlIfeHsted0I8CsYapbehhqve700QJQ8/dmst9jPEwiQq9omSNp8ux/mpIvk+
OjeCLoApZ1slYj9HeiDkwuLDw5o0bKOep6fmrlnnc2uJezqBbjSLmUgocqfCnZb1
fHikvSP0McKjffei76+KH1PYK8BmJwredsHvmfehLJpETHQhe11tO3byPM48iLcy
mybECacqB8zfy7wkvVTWhd+QFkT7x+BE4g/Z07L8z4m9HRxmJbV6EJF1GPlpDJWZ
TV0u86cOAlpMeUy44pfUnej6E9ntafeaHmX7CJpcgskh3h4J/qc=
=uk19
-----END PGP SIGNATURE-----
Merge tag 'docs-6.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
Commit fbb5c0606f ("kbuild: add syscall table generation to
scripts/Makefile.asm-headers") started to generate syscall headers
for architectures using generic syscalls.
However, these headers are always rebuilt using GNU Make 4.4.1 or newer.
When using GNU Make 4.4 or older, these headers are not rebuilt when the
command to generate them is changed, despite the use of the if_changed
macro.
scripts/Makefile.asm-headers now uses FORCE, but it is not marked as
.PHONY. To handle the command line change correctly, .*.cmd files must
be included.
Fixes: fbb5c0606f ("kbuild: add syscall table generation to scripts/Makefile.asm-headers")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wibB7SvXnUftBgAt+4-3vEKRpvEgBeDEH=i=j2GvDitoA@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new
Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI
DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2
blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'
-----BEGIN PGP SIGNATURE-----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=tjMz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
- Fix bug that caused objtool to confuse certain memory ops
added by KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RwK9
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of complex
macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches
and in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix.
-----BEGIN PGP SIGNATURE-----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=XOhL
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
Kconfig simplifies expressions, but redundant '&&' and '||' operators
involving constant symbols 'y' and 'n' are sometimes trimmed and
sometimes not.
[Test Code]
config DEP
def_bool y
config A
bool "A"
depends on DEP && y
config B
bool "B"
depends on DEP && y && y
[Result]
$ make helpnewconfig
[ snip ]
-----
There is no help available for this option.
Symbol: A [=n]
Type : bool
Defined at Kconfig:4
Prompt: A
Depends on: DEP [=y] && y [=y]
Location:
-> A (A [=n])
-----
-----
There is no help available for this option.
Symbol: B [=n]
Type : bool
Defined at Kconfig:8
Prompt: B
Depends on: DEP [=y]
Location:
-> B (B [=n])
-----
The dependency for A, 'DEP && y', remains as-is, while that for B,
'DEP && y && y', has been reduced to 'DEP'.
Currently, expr_eliminate_dups() calls expr_eliminate_yn() only when
trans_count != 0, in other words, only when expr_eliminate_dups1() has
trimmed at least one leaf. It fails to trim a single '&& y', etc.
To fix this inconsistent behavior, expr_eliminate_yn() should be called
at least once even if no leaf has been trimmed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
${DEBFULLNAME-${user}} falls back to ${user} when DEBFULLNAME is unset.
It is more reasonable to do so when DEBFULLNAME is unset or null.
Otherwise, the command:
$ DEBFULLNAME= make deb-pkg
will leave the name field blank.
The same applies to KBUILD_BUILD_USER and KBUILD_BUILD_HOST.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
/usr/include/elf.h, which originates from the glibc/musl, defines
R_ARM_THM_PC22 instead of R_ARM_THM_CALL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
RHEL/CentOS 7, popular distributions that install GNU Make 3.82, reached
EOM/EOL on June 30, 2024. While you may get extended support, it is a
good time to raise the minimum GNU Make version.
The new requirement, GNU Make 4.0, was released in October, 2013.
I did not touch the Makefiles under tools/ because I do not know the
requirements for building tools. I do not find any GNU Make version
checks under tools/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
As commit afa974b771 ("kbuild: add real-prereqs shorthand for
$(filter-out FORCE,$^)") explained, $(real-prereqs) is not just a list
of objects when linking a multi-object module. If a single-object module
is turned into a multi-object module, $^ (and therefore $(real-prereqs)
as well) contains header files recorded in the *.cmd file. Such headers
must be filtered out.
Now that a DTB can be built either from a single source or multiple
source files, the same issue can occur.
Consider the following scenario:
First, foo.dtb is implemented as a single-blob device tree.
The code looks something like this:
[Sample Code 1]
Makefile:
dtb-y += foo.dtb
foo.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
When it is compiled, .foo.dtb.cmd records that foo.dtb depends on
scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h.
Later, foo.dtb is split into a base and an overlay. The code looks
something like this:
[Sample Code 2]
Makefile:
dtb-y += foo.dtb
foo-dtbs := foo-base.dtb foo-addon.dtbo
foo-base.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
foo-addon.dtso:
/dts-v1/;
/plugin/;
/ { };
If you rebuild foo.dtb without 'make clean', you will get this error:
Overlay 'scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h' is incomplete
$(real-prereqs) contains not only foo-base.dtb and foo-addon.dtbo but
also scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h, which is
passed to scripts/dtc/fdtoverlay.
Fixes: 15d16d6dad ("kbuild: Add generic rule to apply fdtoverlay")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
I tweaked mkdebian to cope with optional environment variables.
Remove the explicit "test -n ..." from install-extmod-build.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
-----BEGIN PGP SIGNATURE-----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=AP9P
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
builds
-----BEGIN PGP SIGNATURE-----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=RwXK
-----END PGP SIGNATURE-----
Merge tag 'x86_build_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build update from Borislav Petkov:
- Make sure insn support detection uses the proper compiler flag in
bi-arch builds
* tag 'x86_build_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Add as-instr64 macro to properly evaluate AS_WRUSS
There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming. This allows
atomic reads from multiple registers without the need to wrap a higher
level lock in the client driver just for regmap (which already has locks
anyway). We also have one fix for the KUnit tests, and a bunch of
cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJRsACgkQJNaLcl1U
h9CQcAf+PhHwUoxBextaJzy2HQe9CFV71/I4GEj0MTrtpqKDhmO8AQnsI4dKXr/9
hZPUPR7+6qw7N12NdZQcT6hIX9CnhdiaNALo4ANvG5KlxFljhFbv2sBg1QAgb+Ks
2gLapB4HY0jso+6urNEN5rvucFpf4Mxlz5ilrk3kuuJaC/xf6/QXoU5/9PjPyD5s
ZuCBMg5G0BIIdwc9SFGJPv1UUJ0H6Aj/1ZQNo/JVtIj8uGt8TuvnUrmOxdnHRN1U
b5AMjLnSYMtwRg7Nd/DCINmwPN+I0X79gNE4SG1LAOlQIChhW+47HuGWyCM40jGO
p4X8o/zID9hw5q3y6CpwYvrJ5GRZbA==
=ETId
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
Commit d5940c60e0 ("kbuild: deb-pkg improve maintainer address
generation") supported the "name <email>" form for DEBEMAIL, with
behavior slightly different from devscripts.
In Kbuild, if DEBEMAIL is given in the form "name <email>", it is used
as-is, and DEBFULLNAME is ignored.
In contrast, debchange takes the name from DEBFULLNAME (or NAME) if set,
as described in 'man debchange':
If this variable has the form "name <email>", then the maintainer name
will also be taken from here if neither DEBFULLNAME nor NAME is set.
This commit removes support for the "name <email> form for DEBEMAIL,
as the current behavior is already different from debchange, and the
Debian manual suggests setting the email address and name separately in
DEBEMAIL and DEBFULLNAME. [1]
If there are any complaints about this removal, we can re-add it,
with better alignment with the debchange implementation. [2]
[1]: https://www.debian.org/doc/manuals/debmake-doc/ch03.en.html#email-setup
[2]: https://salsa.debian.org/debian/devscripts/-/blob/v2.23.7/scripts/debchange.pl#L802
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit edec611db0 ("kbuild, deb-pkg: improve maintainer
identification") added the EMAIL and NAME environment variables.
Commit d5940c60e0 ("kbuild: deb-pkg improve maintainer address
generation") removed support for NAME, but kept support for EMAIL.
The EMAIL and NAME environment variables are supported by some tools
(see 'man debchange'), but not by all.
We should support both of them, or neither of them. We should not stop
halfway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Improve the error messages and clean up redundant code.
[1] remove redundant next_sym->name checks
If 'next_sym' is a choice, the first 'if' block is executed. In the
subsequent 'else if' blocks, 'next_sym" is not a choice, hence
next_sym->name is not NULL.
[2] remove redundant sym->name checks
A choice is never selected or implied by anyone because it has no name
(it is syntactically impossible). If it is, sym->name is not NULL.
[3] Show the location of choice instead of "<choice>"
"part of choice <choice>" does not convey useful information. Since a
choice has no name, it is more informative to display the file name and
line number.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig detects recursive dependencies in a choice block, but the error
message is unclear.
[Test Code]
choice
prompt "choose"
depends on A
config A
bool "A"
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "contains symbol A" does not accurately describe the problem.
The issue is that the choice depends on A, which is a member of itself.
The first if-block does not print a sensible message. Remove it.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: symbol <choice> symbol is visible depending on A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A choice member must not depend on another member within the same choice
block.
Kconfig detects this, but the error message is not sensible.
[Test Code]
choice
prompt "choose"
config A
bool "A"
depends on B
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A is part of choice B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "part of choice B" is weird because B is not a choice block,
but a choice member.
To determine whether the current symbol is a part of a choice block,
sym_is_choice(next_sym) must be checked.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A symbol is visible depending on B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a prompt is followed by "if <expr>", the symbol is configurable
when the if-conditional evaluates to true.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. When EXPERT=y, the
prompt is shown, making BLOCK a user-configurable option.
This usage is common throughout the kernel tree, but it has never worked
within a choice block.
[Test Code]
config EXPERT
bool "Allow expert users to modify more options"
choice
prompt "Choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Result]
# CONFIG_EXPERT is not set
When the prompt is hidden, the choice block should produce the default
without asking for the user's preference. Hence, the output should be:
# CONFIG_EXPERT is not set
CONFIG_A=y
# CONFIG_B is not set
Removing unnecessary hacks fixes the issue.
This commit also changes the behavior of 'select' by choice members.
[Test Code 2]
config MODULES
def_bool y
modules
config DEP
def_tristate m
if DEP
choice
prompt "choose"
config A
bool "A"
select C
endchoice
config B
def_bool y
select D
endif
config C
tristate
config D
tristate
The current output is as follows:
CONFIG_MODULES=y
CONFIG_DEP=m
CONFIG_A=y
CONFIG_B=y
CONFIG_C=y
CONFIG_D=m
With this commit, the output will be changed as follows:
CONFIG_MODULES=y
CONFIG_DEP=m
CONFIG_A=y
CONFIG_B=y
CONFIG_C=m
CONFIG_D=m
CONFIG_C will be changed to 'm' because 'select C' will inherit the
dependency on DEP, which is 'm'.
This change is aligned with the behavior of 'select' outside a choice
block; 'select D' depends on DEP, therefore D is selected by (B && DEP).
Note:
With this commit, allmodconfig will set CONFIG_USB_ROLE_SWITCH to 'm'
instead of 'y'. I did not see any build regression with this change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
E_LIST was preveously used to form an expression tree consisting of
choice members.
It is no longer used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
P_CHOICE is a pseudo property used to link a choice with its members.
There is no more code relying on this, except for some debug code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, sym_get_choice_prop() and expr_list_for_each_sym() are
used to iterate on choice members.
Replace them with menu_for_each_sub_entry(), which achieves the same
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
sym_get_choice_value(menu->sym) is equivalent to sym_calc_choice(menu).
Convert all call sites of sym_get_choice_value() and then remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Handling choices has always been in a PITA in Kconfig.
For example, fixes and reverts were repeated for randconfig with
KCONFIG_ALLCONFIG:
- 422c809f03 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 23a5dfdad2 ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
- 8357b48549 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 490f161711 ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
As these commits pointed out, randconfig does not randomize choices when
KCONFIG_ALLCONFIG is used. This issue still remains.
[Test Case]
choice
prompt "choose"
config A
bool "A"
config B
bool "B"
endchoice
$ echo > all.config
$ make KCONFIG_ALLCONFIG=1 randconfig
The output is always as follows:
CONFIG_A=y
# CONFIG_B is not set
Not only randconfig, but other all*config variants are also broken with
KCONFIG_ALLCONFIG.
With the same Kconfig,
$ echo '# CONFIG_A is not set' > all.config
$ make KCONFIG_ALLCONFIG=1 allyesconfig
You will get this:
CONFIG_A=y
# CONFIG_B is not set
This is incorrect because it does not respect all.config.
The correct output should be:
# CONFIG_A is not set
CONFIG_B=y
To handle user inputs more accurately, this commit refactors the code
based on the following principles:
- When a user value is given, Kconfig must set it immediately.
Do not defer it by setting SYMBOL_NEED_SET_CHOICE_VALUES.
- The SYMBOL_DEF_USER flag must not be cleared, unless a new config
file is loaded. Kconfig must not forget user inputs.
In addition, user values for choices must be managed with priority.
If user inputs conflict within a choice block, the newest value wins.
The values given by randconfig have lower priority than explicit user
inputs.
This commit implements it by using a linked list. Every time a choice
block gets a new input, it is moved to the top of the list.
Let me explain how it works.
Let's say, we have a choice block that consists of five symbols:
A, B, C, D, and E.
Initially, the linked list looks like this:
A(=?) --> B(=?) --> C(=?) --> D(=?) --> E(=?)
Suppose randconfig is executed with the following KCONFIG_ALLCONFIG:
CONFIG_C=y
# CONFIG_A is not set
CONFIG_D=y
First, CONFIG_C=y is read. C is set to 'y' and moved to the top.
C(=y) --> A(=?) --> B(=?) --> D(=?) --> E(=?)
Next, '# CONFIG_A is not set' is read. A is set to 'n' and moved to
the top.
A(=n) --> C(=y) --> B(=?) --> D(=?) --> E(=?)
Then, 'CONFIG_D=y' is read. D is set to 'y' and moved to the top.
D(=y) --> A(=n) --> C(=y) --> B(=?) --> E(=?)
Lastly, randconfig shuffles the order of the remaining symbols,
resulting in:
D(=y) --> A(=n) --> C(=y) --> B(=y) --> E(=y)
or
D(=y) --> A(=n) --> C(=y) --> E(=y) --> B(=y)
When calculating the output, the linked list is traversed and the first
visible symbol with 'y' is taken. In this case, it is D if visible.
If D is hidden by 'depends on', the next node, A, is examined. Since
it is already specified as 'n', it is skipped. Next, C is checked, and
selected if it is visible.
If C is also invisible, either B or E is chosen as a result of the
randomization.
If B and E are also invisible, the linked list is traversed in the
reverse order, and the least prioritized 'n' symbol is chosen. It is
A in this case.
Now, Kconfig remembers all user values. This is a big difference from
the previous implementation, where Kconfig would forget CONFIG_C=y when
CONFIG_D=y appeared in the same input file.
The new appaorch respects user-specified values as much as possible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel tree builds some "composite" DTBs, where the final DTB is the
result of applying one or more DTB overlays on top of a base DTB with
fdtoverlay.
The FIT image specification already supports configurations having one
base DTB and overlays applied on top. It is then up to the bootloader to
apply said overlays and either use or pass on the final result. This
allows the FIT image builder to reuse the same FDT images for multiple
configurations, if such cases exist.
The decomposition function depends on the kernel build system, reading
back the .cmd files for the to-be-packaged DTB files to check for the
fdtoverlay command being called. This will not work outside the kernel
tree. The function is off by default to keep compatibility with possible
existing users.
To facilitate the decomposition and keep the code clean, the model and
compatitble string extraction have been moved out of the output_dtb
function. The FDT image description is replaced with the base file name
of the included image.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fix the following rpmbuild warning:
$ make srcrpm-pkg
...
RPM build warnings:
line 34: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There used to be several offenders, but now that for all of them patches
were sent and most of them were applied, enable the warning also for
builds without W=1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
At first, I thought this script would be needed only in init/Makefile.
However, commit 5db8face97 ("kbuild: Restore .version auto-increment
behaviour for Debian packages") and commit 1789fc9125 ("kbuild:
rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg")
revealed that it was actually needed for scripts/package/mk* as well.
After all, scripts/ is a better place for it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Currently, sym_set_tristate_value() is used to set 'y' to a choice
member, which is confusing because it not only sets 'y' to the given
symbol but also tweaks flags of other symbols as a side effect.
Add a dedicated function for setting the value of the given choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The condition (t2 == 0) never becomes true because the zero value
(i.e., E_NONE) is only used as a dummy type for prevtoken. It can
be passed to t1, but not to t2.
The caller of this function only checks expr_compare_type() > 0.
Therefore, the distinction between 0 and -1 is unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
CONFIG_DEBUG_INFO_BTF=y requires one additional link step.
(.tmp_vmlinux.btf)
CONFIG_KALLSYMS=y requires two additional link steps.
(.tmp_vmlinux.kallsyms1 and .tmp_vmlinux.kallsyms2)
Enabling both requires three additional link steps.
When CONFIG_DEBUG_INFO_BTF=y and CONFIG_KALLSYMS=y, the current build
process is as follows:
KSYMS .tmp_vmlinux.kallsyms0.S
AS .tmp_vmlinux.kallsyms0.o
LD .tmp_vmlinux.btf # temporary vmlinux for BTF
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1 # temporary vmlinux for kallsyms step 1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux # final vmlinux
This is redundant because the BTF generation and the kallsyms step 1 can
be performed against the same temporary vmlinux.
When both CONFIG_DEBUG_INFO_BTF and CONFIG_KALLSYMS are enabled, we can
reduce the number of link steps by one.
This commit changes the build process as follows:
KSYMS .tmp_vmlinux0.kallsyms.S
AS .tmp_vmlinux0.kallsyms.o
LD .tmp_vmlinux1 # temporary vmlinux for BTF and kallsyms step 1
BTF .tmp_vmlinux1.btf.o
NM .tmp_vmlinux1.syms
KSYMS .tmp_vmlinux1.kallsyms.S
AS .tmp_vmlinux1.kallsyms.o
LD .tmp_vmlinux2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux2.syms
KSYMS .tmp_vmlinux2.kallsyms.S
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux # final vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
This reimplements commit 951bcae6c5 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Clean up the variables in scripts/link-vmlinux.sh
- Specify the extra objects directly in vmlinux_link()
- Move the AS rule to kallsyms()
- Set kallsymso and btf_vmlinux_bin_o where they are generated
- Remove unneeded variable, kallsymso_prev
- Introduce the btf_data variable
- Introduce the strip_debug flag instead of checking the output name
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reduce the indentation level by continue'ing the loop earlier
if (!sym || sym_is_choice(sym)).
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The outer switch statement can be avoided by continue'ing earlier the
loop when the symbol type is neither S_BOOLEAN nor S_TRISTATE.
Remove it to reduce the indentation level by one. In addition, avoid
the repetition of sym->def[S_DEF_USER].tri.
No functional change intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
I previously submitted a fix for a bug in the choice feature [1], where
I mentioned, "Another (much cleaner) approach would be to remove the
tristate choice support entirely".
There are more issues in the tristate choice feature. For example, you
can observe a couple of bugs in the following test code.
[Test Code]
config MODULES
def_bool y
modules
choice
prompt "tristate choice"
default A
config A
tristate "A"
config B
tristate "B"
endchoice
Bug 1: the 'default' property is not correctly processed
'make alldefconfig' produces:
CONFIG_MODULES=y
# CONFIG_A is not set
# CONFIG_B is not set
However, the correct output should be:
CONFIG_MODULES=y
CONFIG_A=y
# CONFIG_B is not set
The unit test file, scripts/kconfig/tests/choice/alldef_expected_config,
is wrong as well.
Bug 2: choice members never get 'y' with randconfig
For the test code above, the following combinations are possible:
A B
(1) y n
(2) n y
(3) m m
(4) m n
(5) n m
(6) n n
'make randconfig' never produces (1) or (2).
These bugs are fixable, but a more critical problem is the lack of a
sensible syntax to specify the default for the tristate choice.
The default for the choice must be one of the choice members, which
cannot specify any of the patterns (3) through (6) above.
In addition, I have never seen it being used in a useful way.
The following commits removed unnecessary use of tristate choices:
- df8df5e4bc ("usb: get rid of 'choice' for legacy gadget drivers")
- bfb57ef054 ("rapidio: remove choice for enumeration")
This commit removes the tristate choice support entirely, which allows
me to delete a lot of code, making further refactoring easier.
Note:
This includes the revert of commit fa64e5f6a3 ("kconfig/symbol.c:
handle choice_values that depend on 'm' symbols"). It was suspicious
because it did not address the root cause but introduced inconsistency
in visibility between choice members and other symbols.
[1]: https://lore.kernel.org/linux-kbuild/20240427104231.2728905-1-masahiroy@kernel.org/T/#m0a1bb6992581462ceca861b409bb33cb8fd7dbae
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit ee06a3ef7e ("kconfig: Update config changed flag before calling
callback") pointed out that conf_updated flag must be updated _before_
calling the callback, which needs to know the new value.
Given that, it makes sense to directly pass the new value to the
callback.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If any CONFIG option is changed while loading the .config file,
conf_read() calls conf_set_changed(true) and then the conf_changed()
callback.
With conf_read() moved after window initialization, the explicit
conf_changed() call can be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After 8d1001f7bd (kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n),
the following warning "warning: File listed twice: *.dtb" is appearing for
every dtb file that is included.
The reason is that the commented commit already adds the folder
/lib/modules/%{KERNELRELEASE} in kernel.list file so the folder
/lib/modules/%{KERNELRELEASE}/dtb is no longer necessary, just remove it.
Fixes: 8d1001f7bd ("kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After [1] in upstream LLVM, ld.lld's version output became slightly
different when the cmake configuration option LLVM_APPEND_VC_REV is
disabled.
Before:
Debian LLD 19.0.0 (compatible with GNU linkers)
After:
Debian LLD 19.0.0, compatible with GNU linkers
This results in ld-version.sh failing with
scripts/ld-version.sh: 18: arithmetic expression: expecting EOF: "10000 * 19 + 100 * 0 + 0,"
because the trailing comma is included in the patch level part of the
expression. While [1] has been partially reverted in [2] to avoid this
breakage (as it impacts the configuration stage and it is present in all
LTS branches), it would be good to make ld-version.sh more robust
against such miniscule changes like this one.
Use POSIX shell parameter expansion [3] to remove the largest suffix
after just numbers and periods, replacing of the current removal of
everything after a hyphen. ld-version.sh continues to work for a number
of distributions (Arch Linux, Debian, and Fedora) and the kernel.org
toolchains and no longer errors on a version of ld.lld with [1].
Fixes: 02aff85922 ("kbuild: check the minimum linker version in Kconfig")
Link: 0f9fbbb63c [1]
Link: 649cdfc4b6 [2]
Link: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html [3]
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit eb8f689046 ("Use separate sections for __dev/
_cpu/__mem code/data").
Check section mismatch to __meminit* only when CONFIG_MEMORY_HOTPLUG=n.
With this change, the linker script and modpost become simpler, and we
can get rid of the __ref annotations from the memory hotplug code.
[sfr@canb.auug.org.au: remove MEM_KEEP from arch/powerpc/kernel/vmlinux.lds.S]
Link: https://lkml.kernel.org/r/20240710093213.2aefb25f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20240706160511.2331061-2-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The uapi/asm/unistd_{32,64}.h and asm/syscall_table_{32,64}.h headers can
now be generated from scripts/syscall.tbl, which makes this consistent
with the other architectures that have their own syscall.tbl.
riscv has two extra system call that gets added to scripts/syscall.tbl.
The newstat and rlimit entries in the syscall_abis_64 line are for system
calls that were part of the generic ABI when riscv64 got added but are
no longer enabled by default for new architectures. Both riscv32 and
riscv64 also implement memfd_secret, which is optional for all
architectures.
Unlike all the other 32-bit architectures, the time32 and stat64
sets of syscalls are not enabled on riscv32.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
openrisc has one extra system call that gets added to scripts/syscall.tbl.
The time32, stat64, rlimit and renameat entries in the syscall_abis_32
line are for system calls that were part of the generic ABI when
arch/nios2 got added but are no longer enabled by default for new
architectures.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
When asm/syscalls.h is included in kernel/fork.c for the purpose of
type checking, the redirection macros cause problems. Move these so
only the references get redirected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
nios2 has one extra system call that gets added to scripts/syscall.tbl.
The time32, stat64, and rlimit entries in the syscall_abis_32
line are for system calls that were part of the generic ABI when
arch/nios2 got added but are no longer enabled by default for new
architectures.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
csky has two architecture specific system calls, which I add to
the generic table. The time32, stat64 and rlimit entries in the
syscall_abis_32 line are for system calls that were part of the generic
ABI when arch/csky got added but are no longer enabled by default for
new architectures.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
arc has a couple of architecture specific system calls, which I add to the
generic table. This for some reason includes the deprecated sys_sysfs()
syscall that was presumably added by accident.
The time32, renameat, stat64 and rlimit entries in the syscall_abis_32
entry are for system calls that were part of the generic ABI when arch/arc
got added but are no longer enabled by default for new architectures.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are 11 copies of arch/*/kernel/syscalls/Makefile that all implement
the same basic logic in a somewhat awkward way.
I tried out various ways of unifying the existing copies and ended up
with something that hooks into the logic for generating the redirections
to asm-generic headers. This gives a nicer syntax of being able to list
the generated files in $(syscall-y) inside of arch/*/include/asm/Kbuild
instead of both $(generated-y) in that place and also in another
Makefile.
The configuration for which syscall.tbl file to use and which ABIs to
enable is now done in arch/*/kernel/Makefile.syscalls. I have done
patches for all architectures and made sure that the new generic
rules implement a superset of all the architecture specific corner
cases.
ince the header file is not specific to asm-generic/*.h redirects
now, I ended up renaming the file to scripts/Makefile.asm-headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to integrate the system call header generation with generating
the asm-generic wrappers, restrict the generated headers to those that
actually exist in include/asm-generic/.
The path is already known, so add these as a dependency.
The asm-generic/bugs.h header was removed in commit 61235b24b9 ("init:
Remove check_bugs() leftovers"), which now causes a build failure, so
drop it from the list.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
`bindgen` versions 0.66.0 and 0.66.1 panic due to C string literals with
NUL characters [1]:
panicked at .cargo/registry/src/index.crates.io-6f17d22bba15001f/bindgen-0.66.0/codegen/mod.rs:717:71:
called `Result::unwrap()` on an `Err` value: FromBytesWithNulError { kind: InteriorNul(4) }
Thus, in preparation for supporting several `bindgen` versions, add a
version check to warn the user about it.
Since some distributions may have patched it (e.g. Debian did [2]),
check if that seems to be the case (after the version check matches),
in order to avoid printing a warning in that case.
We could make it an error, but 1) it is going to fail anyway later
in the build, 2) we would disable `RUST`, which is also painful, 3)
someone could have patched it in a way that still makes our extra check
fail (however unlikely), 4) the interior NUL may go away in the headers
(however unlikely). Thus just warn about it so that users know why it
is failing.
In addition, add a couple tests for the new cases.
Link: https://github.com/rust-lang/rust-bindgen/pull/2567 [1]
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1069047 [2]
Link: https://lore.kernel.org/r/20240709160615.998336-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With both the workaround for `bindgen` 0.69.0 and the warning about
0.66.0 and 0.66.1 in place, start supporting several `bindgen` versions,
like it was done for the Rust compiler in a previous patch.
All other versions, including the latest 0.69.4, build without errors.
The `bindgen` project, like Rust, has also agreed to have the kernel
in their CI [1] -- thanks! This should help both projects: `bindgen`
will be able to detect early issues like those mentioned above, and the
kernel will be very likely build with new releases (at least for the
basic configuration being tested).
Link: https://github.com/rust-lang/rust-bindgen/pull/2851 [1]
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`bindgen` 0.69.0 contains a bug: `--version` does not work without
providing a header [1]:
error: the following required arguments were not provided:
<HEADER>
Usage: bindgen <FLAGS> <OPTIONS> <HEADER> -- <CLANG_ARGS>...
Thus, in preparation for supporting several `bindgen` versions, work
around the issue by passing a dummy argument.
Include a comment so that we can remove the workaround in the future.
Link: https://github.com/rust-lang/rust-bindgen/pull/2678 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`bindgen`'s logic to find `libclang` (via `clang-sys`) may change over
time, and depends on how it was built (e.g. Linux distributions may decide
to build it differently, and we are going to provide documentation on
installing it via distributions later in this series).
Therefore, clarify that `bindgen` may be built in several ways and
simplify the documentation by only mentioning the most prominent
environment variable (`LIBCLANG_PATH`) as an example on how to tweak the
search of the library at runtime (i.e. when `bindgen` is built as our
documentation explains). This also avoids duplicating the documentation,
like `bindgen` itself does (i.e. it refers to `clang-sys`).
Similarly, replace the test we had for this (which used the real program)
with a mocked one, to avoid depending on the particular build as well.
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is time to start supporting several Rust compiler versions and thus
establish a minimum Rust version.
We may still want to upgrade the minimum sometimes in the beginning since
there may be important features coming into the language that improve
how we write code (e.g. field projections), which may or may not make
sense to support conditionally.
We will start with a window of two stable releases, and widen it over
time. Thus this patch does not move the current minimum (1.78.0), but
instead adds support for the recently released 1.79.0.
This should already be enough for kernel developers in distributions that
provide recent Rust compiler versions routinely, such as Arch Linux,
Debian Unstable (outside the freeze period), Fedora Linux, Gentoo
Linux (especially the testing channel), Nix (unstable) and openSUSE
Tumbleweed. See the documentation patch about it later in this series.
In addition, Rust for Linux is now being built-tested in Rust's pre-merge
CI [1]. That is, every change that is attempting to land into the Rust
compiler is tested against the kernel, and it is merged only if it passes
-- thanks to the Rust project for that!
Thus, with the pre-merge CI in place, both projects hope to avoid
unintentional changes to Rust that break the kernel. This means that,
in general, apart from intentional changes on their side (that we will
need to workaround conditionally on our side), the upcoming Rust compiler
versions should generally work.
For instance, currently, the beta (1.80.0) and nightly (1.81.0) branches
work as well.
Of course, the Rust for Linux CI job in the Rust toolchain may still need
to be temporarily disabled for different reasons, but the intention is
to help bring Rust for Linux into stable Rust.
Link: https://github.com/rust-lang/rust/pull/125209 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This adds the following commits from upstream:
1df7b047fe43 pylibfdt/Makefile.pylibfdt: use project's flags to compile the extension
61e88fdcec52 libfdt: overlay: Fix phandle overwrite check for new subtrees
49d30894466e meson: fix installation with meson-python
d54aaf93673c pylibfdt: clean up python build directory
ab86f1e9fda8 pylibfdt: add VERSION.txt to Python sdist
7b8a30eceabe pylibfdt: fix Python version
ff4f17eb5865 pylibfdt/Makefile.pylibfdt: fix Python library being rebuild during install
9e313b14e684 pylibfdt/meson.build: fix Python library being rebuilt during install
d598fc3648ec tests/run_tests.sh: fix Meson library path being dropped
b98239da2f18 tests/meson.build: fix python and yaml tests not running
c17d76ab5e84 checks: Check the overall length of "interrupt-map"
ae26223a056e libfdt: overlay: Refactor overlay_fixup_phandle
4dd831affd01 libfdt: tests: Update test case for overlay_bad_fixup
e6d294200837 tests: Remove two_roots and named_root from LIBTREE_TESTS_L and add all dtb filenames generated by dumptrees to TESTS_TREES_L in Makefile.tests
855c934e26ae tests: fix tests broken under Meson
4fd3f4f0a95d github: enforce testing pylibfdt and yaml support
9ca7d62dbf0b meson: split run-tests by type
bb51223083a4 meson: fix dependencies of tests
e81900635c95 meson: fix pylibfdt missing dependency on libfdt
822123856980 pylibfdt: fix get_mem_rsv for newer Python versions
1fad065080e6 libfdt: overlay: ensure that existing phandles are not overwritten
b0aacd0a7735 github: add windows/msys CI build
ae97d9745862 github: Don't accidentally suppress test errors
057a7dbbb777 github: Display meson test logs on failure
92b5d4e91678 pylibfdt: Remove some apparently deprecated options from setup.py
417e3299dbd1 github: Update to newer checkout action
5e6cefa17e2d fix MinGW format attribute
24f60011fd43 libfdt: Simplify adjustment of values for local fixups
da39ee0e68b6 libfdt: rework shared/static libraries
a669223f7a60 Makefile: do not hardcode the `install` program path
3fbfdd08afd2 libfdt: fix duplicate meson target
dcef5f834ea3 tests: use correct pkg-config when cross compiling
0b8026ff254f meson: allow building from shallow clones
95c74d71f090 treesource: Restore string list output when no type markers
2283dd78eff5 libfdt: fdt_path_offset_namelen: Reject empty path
79b9e326a162 libfdt: fdt_get_alias_namelen: Validate aliases
52157f13ef3d pylibfdt: Support boolean properties
d77433727566 dtc: fix missing string in usage_opts_help
ad8bf9f9aa39 libfdt: Fix fdt_appendprop_addrrange documentation
6c5e189fb952 github: add workflow for Meson builds
a3dc9f006a78 libfdt: rename libfdt-X.Y.Z.so to libfdt.so.X.Y.Z
35019949c4c7 workflows: build: remove setuptools_scm hack
cd3e2304f4a9 pylibfdt: use fallback version in tarballs
0f5864567745 move release version into VERSION.txt
38165954c13b libfdt: add missing version symbols
5e98b5979354 editorconfig: use tab indentation for version.lds
d030a893be25 tests: generate dtbs in Meson build directory
8d8372b13706 tests: fix use of deprecated meson methods
761114effaf7 pylibtfdt: fix use of deprecated meson method
bf6377a98d97 meson: set minimum Meson version to 0.56.0
4c68e4b16b22 libfdt: fix library version to match project version
bdc5c8793a13 meson: allow disabling tests
f088e381f29e Makefile: allow to install libfdt without building executables
6df5328a902c Fix use of <ctype.h> functions
ccf1f62d59ad libfdt: Fix a typo in libfdt.h
71a8b8ef0adf libfdt: meson: Fix linking on macOS linker
589d8c7653c7 dtc: Add an option to generate __local_fixups__ and __fixups__
e8364666d5ac CI: Add build matrix with multiple Linux distributions
3b02a94b486f dtc: Correct invalid dts output with mixed phandles and integers
d4888958d64b tests: Add additional tests for device graph checks
ea3b9a1d2c5a checks: Fix crash in graph_child_address if 'reg' cell size != 1
b2b9671583e9 livetree: fix off-by-one in propval_cell_n() bounds check
ab481e483061 Add definition for a GitHub Actions CI job
c88038c9b8ca Drop obsolete/broken CI definitions
0ac8b30ba5a1 yaml: Depend on libyaml >= 0.2.3
f1657b2fb5be tests: Add test cases for bad endpoint node and remote-endpoint prop checks
44bb89cafd3d checks: Fix segmentation fault in check_graph_node
60bcf1cde1a8 improve documentation for fdt_path_offset()
a6f997bc77d4 add fdt_get_symbol() and fdt_get_symbol_namelen() functions
18f5ec12a10e use fdt_path_getprop_namelen() in fdt_get_alias_namelen()
df093279282c add fdt_path_getprop_namelen() helper
129bb4b78bc6 doc: dt-object-internal: Fix a typo
390f481521c3 fdtoverlay: Drop a a repeated article
9f8b382ed45e manual: Fix and improve documentation about -@
2cdf93a6d402 fdtoverlay: Fix usage string to not mention "<type>"
72fc810c3025 build-sys: add -Wwrite-strings
083ab26da83b tests: fix leaks spotted by ASAN
6f8b28f49609 livetree: fix leak spotted by ASAN
fd68bb8c5658 Make name_node() xstrdup its name argument
4718189c4ca8 Delay xstrdup() of node and property names coming from a flat tree
0b842c3c8199 Make build_property() xstrdup its name argument
9cceabea1ee0 checks: correct I2C 10-bit address check
0d56145938fe yamltree.c: fix -Werror=discarded-qualifiers & -Werror=cast-qual
61fa22b05f69 checks: make check.data const
7a1d72a788e0 checks.c: fix check_msg() leak
ee5799938697 checks.c: fix heap-buffer-overflow
44c9b73801c1 tests: fix -Wwrite-strings
5b60f5104fcc srcpos.c: fix -Wwrite-strings
32174a66efa4 meson: Fix cell overflow tests when running from meson
64a907f08b9b meson.build: bump version to 1.7.0
e3cde0613bfd Add -Wsuggest-attribute=format warning, correct warnings thus generated
41821821101a Use #ifdef NO_VALGRIND
71c19f20b3ef Do not redefine _GNU_SOURCE if already set
039a99414e77 Bump version to v1.7.0
9b62ec84bb2d Merge remote-tracking branch 'gitlab/main'
3f29d6d85c24 pylibfdt: add size_hint parameter for get_path
2022bb10879d checks: Update #{size,address}-cells check for 'dma-ranges'
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI
g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY
9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs=
=p1Zz
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently only the single part device trees are validated against DT
schema. For the multipart DT files only the base DTB is validated.
Extend the fdtoverlay commands to validate the resulting DTB file
against schema.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-dtbo-check-schema-v1-1-ee1094f88f74@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The header file stringpool.h is included for GCC version >= 8 and then
again for all versions.
Since the header file stringpool.h was added in GCC 4.9 and the kernel
currently requires GCC 5.1 as a minimum, remove the conditional include.
Including the header file only once removes the following warning
reported by make includecheck:
stringpool.h is included more than once
However, it's important to include stringpool.h before attribs.h
because attribs.h uses some of its functions.
Compile-tested with GCC 14.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240629233608.278028-2-thorsten.blum@toblux.com
Signed-off-by: Kees Cook <kees@kernel.org>
The struct instances supplied by the drivers are never modified.
Handle them as const in the regmap core allowing the drivers to put them
into .rodata.
Also add a new entry to const_structs.checkpatch to make sure future
instances of this struct already enter the tree as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-2-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Many structs used by regmap should be const by default.
Add entries to const_structs.checkpatch for them for checkpatch.pl to
warn on new non-const additions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-1-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The asm-generic/unistd.h header still follows the old style of defining
system call numbers and the table. Most architectures got the new
syscall.tbl format as part of the y2038 conversion back in 2018, but
the newer architectures that share a single table never did.
I did a semi-automated conversion of the asm-generic/unistd.h contents
into a syscall.tbl format, using the ABI field to take care of all
the relevant differences that are encoded using #ifdef checks in the
existing header.
Conversion of the architectures is done one at a time in order to
be able to review or revert them as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
At present, Rust in the kernel only supports 64-bit x86, so UML has
followed suit. However, it's significantly easier to support 32-bit i386
on UML than on bare metal, as UML does not use the -mregparm option
(which alters the ABI), which is not yet supported by rustc[1].
Add support for CONFIG_RUST on um/i386, by adding a new target config to
generate_rust_target, and replacing various checks on CONFIG_X86_64 to
also support CONFIG_X86_32.
We still use generate_rust_target, rather than a built-in rustc target,
in order to match x86_64, provide a future place for -mregparm, and more
easily disable floating point instructions.
With these changes, the KUnit tests pass with:
kunit.py run --make_options LLVM=1 --kconfig_add CONFIG_RUST=y
--kconfig_add CONFIG_64BIT=n --kconfig_add CONFIG_FORTIFY_SOURCE=n
An earlier version of these changes was proposed on the Rust-for-Linux
github[2].
[1]: https://github.com/rust-lang/rust/issues/116972
[2]: https://github.com/Rust-for-Linux/linux/pull/966
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20240604224052.3138504-1-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rather than looping through each symbol in a particular section to
calculate a symbol's size, grep for the symbol and its immediate
successor, and only use those two symbols.
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-8-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Rather than invoking a separate addr2line process for each address, invoke
a single addr2line coprocess, and pass each address to its stdin. Previous
work [0] applied a similar change to perf, leading to a ~60x speed-up [1].
If using an object file that is _not_ vmlinux, faddr2line passes a section
name argument to addr2line. Because we do not know until runtime which
section names will be passed to addr2line, we cannot apply this change to
non-vmlinux object files. Hence, it only applies to vmlinux.
[0] commit be8ecc57f1 ("perf srcline: Use long-running addr2line per
DSO")
[1] Link:
https://eighty-twenty.org/2021/09/09/perf-addr2line-speed-improvement
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-6-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
In preparation for identifying an addr2line sentinel. See previous work
[0], which applies a similar change to perf.
[0] commit 8dc26b6f71 ("perf srcline: Make sentinel reading for binutils
addr2line more robust")
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-5-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Rather than checking whether the object file is vmlinux for each invocation
of __faddr2line, check it only once beforehand.
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-4-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Rather than calling readelf three separate times to collect three different
types of info, call it only once, and parse out the different types of info
from its output.
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-3-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Rather than calling readelf several times for each invocation of
__faddr2line, call readelf only three times at the beginning, and save its
result for future use.
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/r/20240415145538.1938745-2-bjohannesmeyer@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
We encounter the following issue after commit a6c1d9cb9a ("stackdepot:
rename pool_index to pool_index_plus_1").
(gdb) lx-dump-page-owner --pfn 262144
...
Python Exception <class 'gdb.error'>: There is no member named pool_index.
Error occurred in Python: There is no member named pool_index.
We rename pool_index to pool_index_plus_1 to fix this issue.
Link: https://lkml.kernel.org/r/20240619074911.100434-7-kuan-ying.lee@canonical.com
Fixes: a6c1d9cb9a ("stackdepot: rename pool_index to pool_index_plus_1")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change VA_BITS_MIN when we use 16K page.
Link: https://lkml.kernel.org/r/20240619074911.100434-6-kuan-ying.lee@canonical.com
Fixes: 9684ec186f ("arm64: Enable LPA2 at boot if supported by the system")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We encounter the following issue after commit 9cce9c6c2c ("arm64: mm: Handle
LVA support as a CPU feature").
(gdb) lx-slabinfo
Python Exception <class 'gdb.error'>: No symbol "vabits_actual" in current context.
Error occurred in Python: No symbol "vabits_actual" in current context.
We set vabits_actual based on TCR_EL1 value when
VA_BITS is bigger than 48.
Link: https://lkml.kernel.org/r/20240619074911.100434-5-kuan-ying.lee@canonical.com
Fixes: 9cce9c6c2c ("arm64: mm: Handle LVA support as a CPU feature")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We need to change the layout of vmemmap in gdb scripts after
commit 32697ff382 ("arm64: vmemmap: Avoid base2 order of
struct page size to dimension region") changed it.
Link: https://lkml.kernel.org/r/20240619074911.100434-4-kuan-ying.lee@canonical.com
Fixes: 32697ff382 ("arm64: vmemmap: Avoid base2 order of struct page size to dimension region")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After we enlarge the module VA range, we also change the module VA
range in gdb scripts.
Link: https://lkml.kernel.org/r/20240619074911.100434-3-kuan-ying.lee@canonical.com
Fixes: 3e35d303ab ("arm64: module: rework module VA range selection")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix GDB command error".
This patchset fixes some GDB command errors.
1. Since memory layout of AARCH64 has been changed, we need to modify
the layout in GDB scripts as well.
2. Fix pool_index naming of stackdepot.
This patch (of 6):
Change the definition of MAX_ORDER to be inclusive.
Link: https://lkml.kernel.org/r/20240619074911.100434-1-kuan-ying.lee@canonical.com
Link: https://lkml.kernel.org/r/20240619074911.100434-2-kuan-ying.lee@canonical.com
Fixes: 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There were several instances of the string "assocat" in the kernel, which
should have been spelled "associat", with the various endings of -ive,
-ed, -ion, and sometimes beginnging with dis-.
Add to the spelling dictionary the corrections so that future instances
will be caught by checkpatch, and fix the instances found.
Originally noticed by accident with a 'git grep socat'.
Link: https://lkml.kernel.org/r/20240612001247.356867-1-jesse.brandeburg@intel.com
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The direct-call syscall dispatch function doesn't know that the exit()
and exit_group() syscall handlers don't return, so the call sites aren't
optimized accordingly.
Fix that by marking the exit syscall declarations __noreturn.
Fixes the following warnings:
vmlinux.o: warning: objtool: x64_sys_call+0x2804: __x64_sys_exit() is missing a __noreturn annotation
vmlinux.o: warning: objtool: ia32_sys_call+0x29b6: __ia32_sys_exit_group() is missing a __noreturn annotation
Fixes: 1e3ad78334 ("x86/syscall: Don't force use of indirect calls for system calls")
Closes: https://lkml.kernel.org/lkml/6dba9b32-db2c-4e6d-9500-7a08852f17a3@paulmck-laptop
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/5d8882bc077d8eadcc7fd1740b56dfb781f12288.1719381528.git.jpoimboe@kernel.org
Now that 40x platforms have gone, remove support
for 40x in the core of powerpc arch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240628121201.130802-4-mpe@ellerman.id.au
Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes: 659bbf7e1b ("kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use $(obj)/ instead of $(src)/ prefix when building C++ modules for
host, as explained in commit b1992c3772 ("kbuild: use $(src) instead
of $(srctree)/$(src) for source directory"). This fixes build failures
of 'xconfig':
$ make O=build/ xconfig
make[1]: Entering directory '/data/linux/kbuild-review/build'
GEN Makefile
make[3]: *** No rule to make target '../scripts/kconfig/qconf-moc.cc', needed by 'scripts/kconfig/qconf-moc.o'. Stop.
Fixes: b1992c3772 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Reported-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MODULES is disabled, 'make (bin)rpm-pkg' fails:
$ make allnoconfig binrpm-pkg
[ snip ]
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/kernel
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/modules.order
To make it work irrespective of CONFIG_MODULES, this commit specifies
the directory path, /lib/modules/%{KERNELRELEASE}, instead of individual
files.
However, doing so would cause new warnings:
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.devname
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.softdep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols.bin
These files exist in /lib/modules/%{KERNELRELEASE} and are also explicitly
marked as %ghost.
Suppress depmod because depmod-generated files are not packaged.
Fixes: 615b3a3d2d ("kbuild: rpm-pkg: do not include depmod-generated files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The make deb-pkg target calls debian-orig which attempts to either
hard link the source .tar to the build-output location or copy the
source .tar to the build-output location. The test to determine
whether to ln or cp is incorrectly expanded by Make and consequently
always attempts to ln the source .tar. This fix corrects the escaping
of '$' so that the test is expanded by the shell rather than by Make
and appropriately selects between ln and cp.
Fixes: b44aa8c96e ("kbuild: deb-pkg: make .orig tarball a hard link if possible")
Signed-off-by: Thayne Harbaugh <thayne@mastodonlabs.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
