To compute delays, better not use time of the day which can
be changed by admins or malicious programs.
Also change ccid3_first_li() to use s64 type for delta variable
to avoid potential overflows.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: dccp@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Adds a pointer back to the sock.
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: dccp@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CCID3 code fails to initialize the trailing padding bytes of struct
tfrc_tx_info added for alignment on 64 bit architectures. It that for
potentially leaks four bytes kernel stack via the getsockopt() syscall.
Add an explicit memset(0) before filling the structure to avoid the
info leak.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix incorrect start markers, wrapped summary lines, missing section
breaks, incorrect separators, and some name mismatches.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use of "unsigned int" is preferred to bare "unsigned" in net tree.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces an unjustified BUG_ON(), which could get triggered under normal
conditions: X_calc can be 0 when p > 0. X would in this case be set to the
minimum, s/t_mbi. Its replacement avoids t_ipi = 0 (unbounded sending rate).
Thanks to Jordi, Victor and Xavier who reported this.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
(Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reorganises the return value convention of the CCID TX sending
function, to permit more flexible schemes, as required by subsequent patches.
Currently the convention is
* values < 0 mean error,
* a value == 0 means "send now", and
* a value x > 0 means "send in x milliseconds".
The patch provides symbolic constants and a function to interpret return values.
In addition, it caps the maximum positive return value to 0xFFFF milliseconds,
corresponding to 65.535 seconds. This is possible since in CCID-3/4 the
maximum possible inter-packet gap is fixed at t_mbi = 64 sec.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was
nowhere used in the entire code.
(Btw, this argument was not even used in the original KAME code where the
function initially came from; compare the variable moreToSend in the
freebsd61-dccp-kame-28.08.2006.patch kept by Emmanuel Lochin.)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
The `options_received' struct is redundant, since it re-duplicates the existing
`p' and `x_recv' fields. This patch removes the sub-struct and migrates the
format conversion operations to ccid3_hc_tx_parse_options().
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This adds a function to take care of the following, separate cases occurring in
the computation of the Loss Rate p:
* 1/(2^32-1) is mapped into 0% as per RFC 4342, 8.5;
* 1/0 is mapped into 100%, the maximum;
* to avoid that p = 1/x is rounded down to 0 when x is very large, since this
means accidentally re-entering slow-start indicated by p == 0, the minimum
resolution value of p is now returned instead;
* a bug in ccid3_hc_rx_getsockopt is fixed: 1/0 was mapped into ~0U.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch is thanks to an investigation by Leandro Sales de Melo and his
colleagues. They worked out two state diagrams which highlight the fact that
the xxx_TERM states in CCID-3/4 are in fact not necessary.
And this can be confirmed by in turn looking at the code: the xxx_TERM states
are only ever set in ccid3_hc_{rx,tx}_exit(): when CCID-3 sets the state
to xxx_TERM, it is at a time where no more processing should be going on,
hence it is not necessary to introduce a dedicated exit state - this is already
implied by unloading the CCID.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This
1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is
necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state
which options may (not) appear on what packet type.
2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in
RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets")
and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets").
3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This
is also no longer necessary, since the CCID-specific option-parsing routines
are passed every single parameter of the type-length-value option encoding.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This simplifies and consolidates the TX option-parsing code:
1. The Loss Intervals option is not currently used, so dead code related to
this option is removed. I am aware of no plans to support the option, but
if someone wants to implement it (e.g. for inter-op tests), it is better
to start afresh than having to also update currently unused code.
2. The Loss Event and Receive Rate options have a lot of code in common (both
are 32 bit, both have same length etc.), so this is consolidated.
3. The test against GSR is not necessary, because
- on first loading CCID3, ccid_new() zeroes out all fields in the socket;
- ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to
pinv = opt_recv->ccid3or_loss_event_rate;
if (pinv == ~0U || pinv == 0)
hctx->p = 0;
- as a result, the sequence number field is removed from opt_recv.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since
1. it suffered from complex passing of return values (the return value both
indicated successful lookup while the value doubled as RTT sample);
2. when for some odd reason the sample value equalled 0, this triggered a bug
warning about "bogus Ack", due to the ambiguity of the return value;
3. on a passive host which has not sent anything the TX history is empty and
thus will lead to unwanted "bogus Ack" warnings such as
ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148
ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606.
The fix is to replace the implicit encoding by performing the steps manually.
Furthermore, the "bogus Ack" warning has been removed, since it can actually be
triggered due to several reasons (network reordering, old packet, (3) above),
hence it is not very useful.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This fixes a subtle bug in the calculation of the inter-packet gap and shows
that t_delta, as it is currently used, is not needed.
The algorithm from RFC 5348, 8.3 below continually computes a send time t_nom,
which is initialised with the current time t_now; t_gran = 1E6 / HZ specifies
the scheduling granularity, s the packet size, and X the sending rate:
t_distance = t_nom - t_now; // in microseconds
t_delta = min(t_ipi, t_gran) / 2; // `delta' parameter in microseconds
if (t_distance >= t_delta) {
reschedule after (t_distance / 1000) milliseconds;
} else {
t_ipi = s / X; // inter-packet interval in usec
t_nom += t_ipi; // compute the next send time
send packet now;
}
Problem:
--------
Rescheduling requires a conversion into milliseconds (sk_reset_timer()). The
highest jiffy resolution with HZ=1000 is 1 millisecond, so using a higher
granularity does not make much sense here.
As a consequence, values of t_distance < 1000 are truncated to 0. This issue
has so far been resolved by using instead
if (t_distance >= t_delta + 1000)
reschedule after (t_distance / 1000) milliseconds;
This is unnecessarily large, a lower bound is t_delta' = max(t_delta, 1000).
And it implies a further simplification:
a) when HZ >= 500, then t_delta <= t_gran/2 = 10^6/(2*HZ) <= 1000, so that
t_delta' = MAX(1000, t_delta) = 1000 (constant value);
b) when HZ < 500, then t_delta = 1/2*MIN(rtt, t_ipi, t_gran) <= t_gran/2,
so that 1000 <= t_delta' <= t_gran/2.
The maximum error of using a constant t_delta in (b) is less than half a jiffy.
Fix:
----
The patch replaces t_delta with a constant, whose value depends on CONFIG_HZ,
changing the above algorithm to:
if (t_distance >= t_delta')
reschedule after (t_distance / 1000) milliseconds;
where t_delta' = 10^6/(2*HZ) if HZ < 500, and t_delta' = 1000 otherwise.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time
RTO lower bound with a per-route tunable value.
The original Kconfig option solved the problem that a very low RTT (in the
order of HZ) can trigger too frequent and unnecessary reductions of the
sending rate.
This tunable does not affect the initial RTO value of 2 seconds specified in
RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value,
it allows to adapt to network conditions.
The same effect as the original Kconfig option of 100ms is now achieved by
> ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0
(assuming HZ=1000).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CCIDs are activated as last of the features, at the end of the handshake,
were the LISTEN state of the master socket is inherited into the server
state of the child socket. Thus, the only states visible to CCIDs now are
OPEN/PARTOPEN, and the closing states.
This allows to remove tests which were previously necessary to protect
against referencing a socket in the listening state (in CCID-3), but which
now have become redundant.
As a further byproduct of enabling the CCIDs only after the connection has been
fully established, several typecast-initialisations of ccid3_hc_{rx,tx}_sock
can now be eliminated:
* the CCID is loaded, so it is not necessary to test if it is NULL,
* if it is possible to load a CCID and leave the private area NULL, then this
is a bug, which should crash loudly - and earlier,
* the test for state==OPEN || state==PARTOPEN now reduces only to the closing
phase (e.g. when the node has received an unexpected Reset).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch collects cosmetics-only changes to separate these from
code changes:
* update with regard to CodingStyle and whitespace changes,
* documentation:
- adding/revising comments,
- remove CCID-3 RX socket documentation which is either
duplicate or refers to fields that no longer exist,
* expand embedded tfrc_tx_info struct inline for consistency,
removing indirections via #define.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes an unused 'sk' argument from several option-inserting functions.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This continues the previous patch, by applying the same change to CCID-3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements the new naming scheme also for CCID-3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No code change, cosmetical changes only:
* whitespace cleanup via scripts/cleanfile,
* remove self-references to filename at top of files,
* fix coding style (extraneous brackets),
* fix documentation style (kernel-doc-nano-HOWTO).
Thanks are due to Ivo Augusto Calado who raised these issues by
submitting good-quality patches.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
String literals are constant, and usually, we can also tag the array
of pointers const too, moving it to the .rodata section.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on Arnaldo's earlier patch, this patch integrates the standardised
CCID congestion control plugins (CCID-2 and CCID-3) of DCCP with dccp.ko:
* enables a faster connection path by eliminating the need to always go
through the CCID registration lock;
* updates the implementation to use only a single array whose size equals
the number of configured CCIDs instead of the maximum (256);
* since the CCIDs are now fixed array elements, synchronization is no
longer needed, simplifying use and implementation.
CCID-2 is suggested as minimum for a basic DCCP implementation (RFC 4340, 10);
CCID-3 is a standards-track CCID supported by RFC 4342 and RFC 5348.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements [RFC 3448, 4.5], which performs congestion avoidance behaviour
by reducing the transmit rate as the queueing delay (measured in terms of
long-term RTT) increases.
Oscillation can be turned on/off via a module option (do_osc_prev) and via sysfs
(using mode 0644), the default is off.
Overflow analysis:
------------------
* oscillation prevention is done after update_x(), so that t_ipi <= 64000;
* hence the multiplication "t_ipi * sqrt(R_sample)" needs 64 bits;
* done using u64 for sqrt_sample and explicit typecast of t_ipi;
* the divisor, R_sqmean, is non-zero because oscillation prevention is first
called when receiving the second feedback packet, and tfrc_scaled_rtt() > 0.
A detailed discussion of the algorithm (with plots) is on
http://www.erg.abdn.ac.uk/users/gerrit/dccp/notes/ccid3/sender_notes/oscillation_prevention/
The algorithm has negative side effects:
* when allowing to decrease t_ipi (leads to a large RTT) and
* when using it during slow-start;
both uses are therefore disabled.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch simplifies the computation of t_ipi, avoiding expensive computations
to enforce the minimum sending rate.
Both RFC 3448 and rfc3448bis (revision #06), as well as RFC 4342 sec 5., require
at various stages that at least one packet must be sent per t_mbi = 64 seconds.
This requires frequent divisions of the type X_min = s/t_mbi, which are later
converted back into an inter-packet-interval t_ipi_max = s/X_min = t_mbi.
The patch removes the expensive indirection; in the unlikely case of having
a sending rate less than one packet per 64 seconds, it also re-adjusts X.
The following cases document conformance with RFC 3448 / rfc3448bis-06:
1) Time until receiving the first feedback packet:
* if the sender has no initial RTT sample then X = s/1 Bps > s/t_mbi;
* if the sender has an initial RTT sample or when the first feedback
packet is received, X = W_init/R > s/t_mbi.
2) Slow-start (p == 0 and feedback packets come in):
* RFC 3448 (current code) enforces a minimum of s/R > s/t_mbi;
* rfc3448bis (future code) enforces an even higher minimum of W_init/R.
3) Congestion avoidance with no absence of feedback (p > 0):
* when X_calc or X_recv/2 are too low, the minimum of X_min = s/t_mbi
is enforced in update_x() when calling update_send_interval();
* update_send_interval() is, as before, only called when X changes
(i.e. either when increasing or decreasing, not when in equilibrium).
4) Reduction of X without prior feedback or during slow-start (p==0):
* both RFC 3448 and rfc3448bis here halve X directly;
* the associated constraint X >= s/t_mbi is nforced here by send_interval().
5) Reduction of X when p > 0:
* X is modified indirectly via X_recv (RFC 3448) or X_recv_set (rfc3448bis);
* in both cases, control goes back to section 4.3 (in both documents);
* since p > 0, both documents use X = max(min(...), s/t_mbi), which is
enforced in this patch by calling send_interval() from update_x().
I think that this analysis is exhaustive. Should I have forgotten a case,
the worst-case consideration arises when X sinks below s/t_mbi, and is then
increased back up to this minimum value. Even under this assumption, the
behaviour is correct, since all lower limits of X in RFC 3448 / rfc3448bis
are either equal to or greater than s/t_mbi.
Note on the condition X >= s/t_mbi <==> t_ipi = s/X <= t_mbi: since X is
scaled by 64, and all time units are in microseconds, the coded condition is:
t_ipi = s * 64 * 10^6 usec / X <= 64 * 10^6 usec
This simplifies to s / X <= 1 second <==> X * 1 second >= s > 0.
(A zero `s' is not allowed by the CCID-3 code).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
rfc3448bis allows three different ways of tracking the packet size `s':
1. using the MSS/MPS (at initialisation, 4.2, and in 4.1 (1));
2. using the average of `s' (in 4.1);
3. using the maximum of `s' (in 4.2).
Instead of hard-coding a single interpretation of rfc3448bis, this implements
a choice of all three alternatives and suggests the first as default, since it
is the option which is most consistent with other parts of the specification.
The patch further deprecates the update of t_ipi whenever `s' changes. The
gains of doing this are only small since a change of s takes effect at the
next instant X is updated:
* when the next feedback comes in (within one RTT or less);
* when the nofeedback timer expires (within at most 4 RTTs).
Further, there are complications caused by updating t_ipi whenever s changes:
* if t_ipi had previously been updated to effect oscillation prevention (4.5),
then it is impossible to make the same adjustment to t_ipi again, thus
counter-acting the algorithm;
* s may be updated any time and a modification of t_ipi depends on the current
state (e.g. no oscillation prevention is done in the absence of feedback);
* in rev-06 of rfc3448bis, there are more possible cases, depending on whether
the sender is in slow-start (t_ipi <= R/W_init), or in congestion-avoidance,
limited by X_recv or the throughput equation (t_ipi <= t_mbi).
Thus there are side effects of always updating t_ipi as s changes. These may not
be desirable. The only case I can think of where such an update makes sense is
to recompute X_calc when p > 0 and when s changes (not done by this patch).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
The patch updates CCID-3 with regard to the latest rfc3448bis-06:
* in the first revisions of the draft, MSS was used for the RFC 3390 window;
* then (from revision #1 to revision #2), it used the packet size `s';
* now, in this revision (and apparently final), the value is back to MSS.
This change has an implication for the case when no RTT sample is available,
at the time of sending the first packet:
* with RTT sample, 2*MSS/RTT <= initial_rate <= 4*MSS/RTT;
* without RTT sample, the initial rate is one packet (s bytes) per second
(sec. 4.2), but using s instead of MSS here creates an imbalance, since
this would further reduce the initial sending rate.
Hence the patch uses MSS (called MPS in RFC 4340) in all places.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch is a requirement for enabling ECN support later on. With that change
in mind, the following preparations are done:
* renamed handle_loss() into congestion_event() since it returns true when a
congestion event happens (it will eventually also take care of ECN packets);
* lets tfrc_rx_congestion_event() always update the RX history records, since
this routine needs to be called for each non-duplicate packet anyway;
* made all involved boolean-type functions to have return type `bool';
Updating the RX history records is now only necessary for the packets received
up to sending the first feedback. The receiver code becomes again simpler.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This updates the computation of X_recv with regard to Errata 610/611 for
RFC 4342 and draft rfc3448bis-06, ensuring that at least an interval of 1
RTT is used to compute X_recv. The change is wrapped into a new function
ccid3_hc_rx_x_recv().
Further changes:
----------------
* feedback is not sent when no data packets arrived (bytes_recv == 0), as per
rfc3448bis-06, 6.2;
* take the timestamp for the feedback /after/ dccp_send_ack() returns, to avoid
taking the transmission time into account (in case layer-2 is busy);
* clearer handling of failure in ccid3_first_li().
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This updates the CCID-3 receiver in part with regard to errata 610 and 611
(http://www.rfc-editor.org/errata_list.php), which change RFC 4342 to use the
Receive Rate as specified in rfc3448bis, requiring to constantly sample the
RTT (or use a sender RTT).
Doing this requires reusing the RX history structure after dealing with a loss.
The patch does not resolve how to compute X_recv if the interval is less
than 1 RTT. A FIXME has been added (and is resolved in subsequent patch).
Furthermore, since this is all TFRC-based functionality, the RTT estimation
is now also performed by the dccp_tfrc_lib module. This further simplifies
the CCID-3 code.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
The only state information that the CCID-3 receiver keeps is whether initial
feedback has been sent or not. Further, this overlaps with use of feedback:
* state == TFRC_RSTATE_NO_DATA as long as no feedback has been sent;
* state == TFRC_RSTATE_DATA as soon as the first feedback has been sent.
This patch reduces the duplication, by memorising the type of the last feedback.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This migrates more TFRC-related code into the dccp_tfrc_lib:
* sampling of the packet size `s' (which is only needed until the first
loss interval is computed (ccid3_first_li));
* updating the byte-counter `bytes_recvd' in between sending feedbacks.
The result is a better separation of CCID-3 specific and TFRC specific
code, which aids future integration with ECN and e.g. CCID-4.
Further changes:
----------------
* replaced magic number of 536 with equivalent constant TCP_MIN_RCVMSS;
(this constant is also used when no estimate for `s' is available).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This changes the return type of tfrc_lh_update_i_mean() to void, since that
function returns always `false'. This is due to
len = dccp_delta_seqno(cur->li_seqno, DCCP_SKB_CB(skb)->dccpd_seq) + 1;
if (len - (s64)cur->li_length <= 0) /* duplicate or reordered */
return 0;
which means that update_i_mean can only increase the length of the open loss
interval I_0, and hence the value of I_tot0 (RFC 3448, 5.4). Consequently the
test `i_mean < old_i_mean' at the end of the function always evaluates to false.
There is no known way by which a loss interval can suddenly become shorter,
therefore the return type of the function is changed to void. (That is, under
the given circumstances step (3) in RFC 3448, 6.1 will not occur.)
Further changes:
----------------
* the function is now called from tfrc_rx_handle_loss, which is equivalent
to the previous way of calling from rx_packet_recv (it was called whenever
there was no new or pending loss, now it is also updated when there is
a pending loss - this increases the accuracy a bit);
* added a FIXME to possibly consider NDP counting as per RFC 4342 (this is
not implemented yet).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This enables the TFRC code to begin loss detection (as soon as the module
is loaded), using the latest updates from rfc3448bis-06, 6.3.1:
* when the first data packet(s) are lost or marked, set
* X_target = s/(2*R) => f(p) = s/(R * X_target) = 2,
* corresponding to a loss rate of ~ 20.64%.
The handle_loss() function is now called right at the begin of rx_packet_recv()
and thus no longer protected against duplicates: hence a call to rx_duplicate()
has been added. Such a call makes sense now, as the previous patch initialises
the first entry with a sequence number of GSR.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch
1) separates history allocation and initialisation, to facilitate early
loss detection (implemented by a subsequent patch);
2) removes duplication by using the existing tfrc_rx_hist_purge() if the
allocation fails. This is now possible, since the initialisation routine
3) zeroes out the entire history before using it.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Since CCIDs are only used during the established phase of a connection,
they have very little internal state; this specifically reduces to:
* "no packet sent" if and only if s == 0, for the TX packet size s;
* when the first packet has been sent (i.e. `s' > 0), the question is whether
or not feedback has been received:
- if a feedback packet is received, "feedback = yes" is set,
- if the nofeedback timer expires, "feedback = no" is set.
Thus the CCID only needs to remember state about whether or not feedback
has been received. This is now implemented using a boolean flag, which is
toggled when a feedback packet arrives or the nofeedback timer expires.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
The DCCP base time resolution is 10 microseconds (RFC 4340, 13.1 ... 13.3).
Using a timer with a lower resolution was found to trigger the following
bug warnings/problems on high-speed networks (e.g. local loopback):
* RTT samples are rounded down to 0 if below resolution;
* in some cases, negative RTT samples were observed;
* the CCID-3 feedback timer complains that the feedback interval is 0,
since the feedback interval is in the order of 1 RTT or less and RTT
measurement rounded this down to 0;
On an Intel computer this will for instance happen when using a
boot-time parameter of "clocksource=jiffies".
The following system log messages were observed:
11:24:00 kernel: BUG: delta (0) <= 0 at ccid3_hc_rx_send_feedback()
11:26:12 kernel: BUG: delta (0) <= 0 at ccid3_hc_rx_send_feedback()
11:26:30 kernel: dccp_sample_rtt: unusable RTT sample 0, using min
11:26:30 last message repeated 5 times
This patch defines a global constant for the time resolution, adds this in
timer.c, and checks the available clock resolution at CCID-3 module load time.
When the resolution is worse than 10 microseconds, module loading exits with
a message "socket type not supported".
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch reorganises the return value convention of the CCID TX sending
function, to permit more flexible schemes, as required by subsequent patches.
Currently the convention is
* values < 0 mean error,
* a value == 0 means "send now", and
* a value x > 0 means "send in x milliseconds".
The patch provides symbolic constants and a function to interpret return values.
In addition, it caps the maximum positive return value to 0xFFFF milliseconds,
corresponding to 65.535 seconds.
This is possible since in CCID-3 the maximum inter-packet gap is t_mbi = 64 sec.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch is thanks to an investigation by Leandro Sales de Melo and his
colleagues. They worked out two state diagrams which highlight the fact that
the xxx_TERM states in CCID-3/4 are in fact not necessary.
And this can be confirmed by in turn looking at the code: the xxx_TERM states
are only ever set in ccid3_hc_{rx,tx}_exit(). These two functions are part
of the following call chain:
* ccid_hc_{tx,rx}_exit() are called from ccid_delete() only;
* ccid_delete() invokes ccid_hc_{tx,rx}_exit() in the way of a destructor:
after calling ccid_hc_{tx,rx}_exit(), the CCID is released from memory;
* ccid_delete() is in turn called only by ccid_hc_{tx,rx}_delete();
* ccid_hc_{tx,rx}_delete() is called only if
- feature negotiation failed (dccp_feat_activate_values()),
- when changing the RX/TX CCID (to eject the current CCID),
- when destroying the socket (in dccp_destroy_sock()).
In other words, when CCID-3 sets the state to xxx_TERM, it is at a time where
no more processing should be going on, hence it is not necessary to introduce
a dedicated exit state - this is implicit when unloading the CCID.
The patch removes this state, one switch-statement collapses as a result.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This removes the argument `more' from ccid_hc_tx_packet_sent, since it was
nowhere used in the entire code.
(Anecdotally, this argument was not even used in the original KAME code where
the function originally came from; compare the variable moreToSend in the
freebsd61-dccp-kame-28.08.2006.patch now maintained by Emmanuel Lochin.)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
The `options_received' struct is redundant, since it re-duplicates the existing
`p' and `x_recv' fields. This patch removes the sub-struct and migrates the
format conversion operations (cf. below) to ccid3_hc_tx_parse_options().
Why the fields are redundant
----------------------------
The Loss Event Rate p and the Receive Rate x_recv are initially 0 when first
loading CCID-3, as ccid_new() zeroes out the entire ccid3_hc_tx_sock.
When Loss Event Rate or Receive Rate options are received, they are stored by
ccid3_hc_tx_parse_options() into the fields `ccid3or_loss_event_rate' and
`ccid3or_receive_rate' of the sub-struct `options_received' in ccid3_hc_tx_sock.
After parsing (considering only the established state - dccp_rcv_established()),
the packet is passed on to ccid_hc_tx_packet_recv(). This calls the CCID-3
specific routine ccid3_hc_tx_packet_recv(), which performs the following copy
operations between fields of ccid3_hc_tx_sock:
* hctx->options_received.ccid3or_receive_rate is copied into hctx->x_recv,
after scaling it for fixpoint arithmetic, by 2^64;
* hctx->options_received.ccid3or_loss_event_rate is copied into hctx->p,
considering the above special cases; in addition, a value of 0 here needs to
be mapped into p=0 (when no Loss Event Rate option has been received yet).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This adds a function to take care of the following cases occurring in the
computation of the Loss Rate p:
* 1/(2^32-1) is mapped into 0% as per RFC 4342, 8.5;
* 1/0 is mapped into the maximum of 100%;
* we want to avoid that p = 1/x is rounded down to 0 when x is very large,
since this means accidentally re-entering slow-start (indicated by p==0).
In the last case, the minimum-resolution value of p is returned.
Furthermore, a bug in ccid3_hc_rx_getsockopt is fixed (1/0 was mapped into ~0U),
which now allows to consistently print the scaled p-values as
printf("Loss Event Rate = %u.%04u %%\n", rx_info.tfrcrx_p / 10000,
rx_info.tfrcrx_p % 10000);
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This patch ...
1. adds packet type information to ccid_hc_{rx,tx}_parse_options(). This is
necessary, since table 3 in RFC 4340, 5.8 leaves it to the CCIDs to state
which options may (not) appear on what packet type.
2. adds such a check for CCID-3's {Loss Event, Receive} Rate as specified in
RFC 4340 8.3 ("Receive Rate options MUST NOT be sent on DCCP-Data packets")
and 8.5 ("Loss Event Rate options MUST NOT be sent on DCCP-Data packets").
3. removes an unused argument `idx' from ccid_hc_{rx,tx}_parse_options(). This
is also no longer necessary, since the CCID-specific option-parsing routines
are passed every single parameter of the type-length-value option encoding.
Also added documentation and made argument naming scheme consistent.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This simplifies and consolidates the TX option-parsing code:
1. The Loss Intervals option is not currently used, so dead code related to
this option is removed. I am aware of no plans to support the option, but
if someone wants to implement it (e.g. for inter-op tests), it is better
to start afresh than having to also update currently unused code.
2. The Loss Event and Receive Rate options have a lot of code in common (both
are 32 bit, both have same length etc.), so this is consolidated.
3. The test against GSR is not necessary, because
- on first loading CCID3, ccid_new() zeroes out all fields in the socket;
- ccid3_hc_tx_packet_recv() treats 0 and ~0U equivalently, due to
pinv = opt_recv->ccid3or_loss_event_rate;
if (pinv == ~0U || pinv == 0)
hctx->p = 0;
- as a result, the sequence number field is removed from opt_recv.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
This removes the RTT-sampling function tfrc_tx_hist_rtt(), since
1. it suffered from complex passing of return values (the return value both
indicated successful lookup while the value doubled as RTT sample);
2. when for some odd reason the sample value equalled 0, this triggered a bug
warning about "bogus Ack", due to the ambiguity of the return value;
3. on a passive host which has not sent anything the TX history is empty and
thus will lead to unwanted "bogus Ack" warnings such as
ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-28197148
ccid3_hc_tx_packet_recv: server(e7b7d518): DATAACK with bogus ACK-26641606.
The fix is to replace the implicit encoding by performing the steps manually.
Furthermore, the "bogus Ack" warning has been removed, since it can actually be
triggered due to several reasons (network reordering, old packet, (3) above),
hence it is not very useful.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
