Commit Graph

495 Commits

Author SHA1 Message Date
Gustavo F. Padovan
7fe9b298c9 Bluetooth: Stop ack_timer if ERTM enters in Local Busy or SREJ_SENT
The ack_timer is implemation specific, disabling it in such situation
avoids some potencial errors in the ERTM protocol.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Ron Shaffer
2d0a03460a Bluetooth: Reassigned copyright to Code Aurora Forum
Qualcomm, Inc. has reassigned rights to Code Aurora Forum. Accordingly,
as files are modified by Code Aurora Forum members, the copyright
statement will be updated.

Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:06 -07:00
Johan Hedberg
32c2ece5ea Bluetooth: Add debugfs support for showing the blacklist
This patch adds a debugfs blacklist entry for each HCI device which can
be used to list the current content of the blacklist.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
Johan Hedberg
f03585689f Bluetooth: Add blacklist support for incoming connections
In some circumstances it could be desirable to reject incoming
connections on the baseband level. This patch adds this feature through
two new ioctl's: HCIBLOCKADDR and HCIUNBLOCKADDR. Both take a simple
Bluetooth address as a parameter. BDADDR_ANY can be used with
HCIUNBLOCKADDR to remove all devices from the blacklist.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
Gustavo F. Padovan
95ffa97827 Bluetooth: Fix L2CAP control bit field corruption
When resending an I-frame, ERTM was reusing the control bits from the last
time it was sent, that was causing a corruption in the new control field
due to it dirty fields.

This patches extracts only the SAR bits from the old field and reuse it to
resend the packet, the others bits should be reset and receive the
updated value.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
Gustavo F. Padovan
c13ffa620f Bluetooth: Proper shutdown ERTM when closing the channel
Fix a crash regarding the Monitor Timeout, it was running even after the
shutdown of the ACL connection, which doesn't make sense.

The same code also fixes another issue, before this patch L2CAP was sending
many Disconnections Requests while we have to send only one.

The issues are related to each other, a expired Monitor Timeout can
trigger a Disconnection Request and then we may have a crash if the link
was already deleted.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
Nathan Holstein
51893f88dd Bluetooth: Fix bug with ERTM minimum packet length
ERTM and streaming mode L2CAP sockets have no minimum packet length. Only
basic mode connections have minimum length.

Instead, validate the packet containing all necessary control, FCS,
and SAR fields.

The patch fixes the drop of valid packets with length lower than 4.

Signed-off-by: Nathan Holstein <ngh@isomerica.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:05 -07:00
João Paulo Rechi Vita
bfbacc1155 Bluetooth: Fix SREJ_QUEUE corruption in L2CAP
Since all TxSeq values are modulo, we shall not compare them directly. We
have to compare their offset inside the TxWindow instead.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
6e2b6722ab Bluetooth: Fix bug in l2cap_ertm_send() behavior
This patch makes l2cap_ertm_send() similar to the Send-Data action of
the ERTM spec. We shall not check for RemoteBusy or WAIT_F state
inside l2cap_ertm_send().

Such checks were causing a bug in the retransmission logic of ERTM and
making ERTM stalls until the ACL is dropped.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
bc1b1f8bee Bluetooth: Only check SAR bits if frame is an I-frame
The SAR bits doesn't make sense for an S-frame. It doesn't use SAR.

Checking SAR for a S-frames can lead to L2CAP errors, it could close
the channel with an invalid packet length, since we was removing the 2
of the of any frame that match SAR start bits, without check if it is
an I-frame.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
8ff50ec04a Bluetooth: Fix bug with ERTM vars increment
All ERTM operations regarding the txWindow should be modulo 64,
otherwise we confuse the ERTM logic and connections will break.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
f6337c7711 Bluetooth: Fix drop of packets with invalid req_seq/tx_seq
We shall not use an unsigned var since we are expecting negatives value
there. Using unsigned causes ERTM connection to close due to invalid
ReqSeq numbers.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
0b31c85ce7 Bluetooth: Remove L2CAP Extended Features from Kconfig
This reverts commit 84fb0a6334 which adds
the L2CAP Extended Features to the Kconfig, that is actually not needed.
One can use other mechanisms to enable L2CAP Extended Features.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
Gustavo F. Padovan
fd059b9bd0 Bluetooth: Remove max_tx and tx_window module paramenters from L2CAP
We don't need these parameters anymore since we have socket options for
them.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21 10:39:04 -07:00
David S. Miller
11fe883936 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/vhost/net.c
	net/bridge/br_device.c

Fix merge conflict in drivers/vhost/net.c with guidance from
Stephen Rothwell.

Revert the effects of net-2.6 commit 573201f36f
since net-next-2.6 has fixes that make bridge netpoll work properly thus
we don't need it disabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 18:25:24 -07:00
Ville Tervo
045309820a Bluetooth: Update sec_level/auth_type for already existing connections
Update auth level for already existing connections if it is lower
than required by new connection.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Reviewed-by: Emeltchenko Andrei <andrei.emeltchenko@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08 20:35:31 -03:00
Johan Hedberg
da213f41cd Bluetooth: Reset the security level after an authentication failure
When authentication fails for a connection the assumed security level
should be set back to BT_SECURITY_LOW so that subsequent connect
attempts over the same link don't falsely assume that security is
adequate enough.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08 20:35:27 -03:00
Andrei Emeltchenko
e501d0553a Bluetooth: Check L2CAP pending status before sending connect request
Due to race condition in L2CAP state machine L2CAP Connection Request
may be sent twice for SDP with the same source channel id. Problems
reported connecting to Apple products, some carkit, Blackberry phones.

...
2010-06-07 21:18:03.651031 < ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
2010-06-07 21:18:03.653473 > HCI Event: Number of Completed Packets (0x13) plen 5
    handle 1 packets 1
2010-06-07 21:18:03.653808 > HCI Event: Auth Complete (0x06) plen 3
    status 0x00 handle 1
2010-06-07 21:18:03.653869 < ACL data: handle 1 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
...

Patch uses L2CAP_CONF_CONNECT_PEND flag to mark that L2CAP Connection
Request has been sent already.

Modified version of patch from Ville Tervo.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-08 20:35:23 -03:00
David S. Miller
597e608a84 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-07-07 15:59:38 -07:00
Gustavo F. Padovan
1a61a83ff5 Bluetooth: Bring back var 'i' increment
commit ff6e2163f2 accidentally added a
regression on the bnep code. Fixing it.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24 22:08:37 -07:00
Eric Dumazet
bc10502dba net: use __packed annotation
cleanup patch.

Use new __packed annotation in net/ and include/
(except netfilter)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03 03:21:52 -07:00
Joe Perches
3fa21e07e6 net: Remove unnecessary returns from void function()s
This patch removes from net/ (but not any netfilter files)
all the unnecessary return; statements that precede the
last closing brace of void functions.

It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.

Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
  xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 23:23:14 -07:00
Marcel Holtmann
2b0b05ddc0 Bluetooth: Fix issues where sk_sleep() helper is needed now
There were some left-overs that used sk->sk_sleep instead of the new
sk_sleep() helper.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 11:33:10 +02:00
Tomas Winkler
7b767cad29 Bluetooth: Use strict_strtoul instead of simple_strtoul
Use strict_strtoul as suggested by checkpatch.pl for more strict input
checking.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:34:04 +02:00
Marcel Holtmann
f48fd9c8cd Bluetooth: Create per controller workqueue
Instead of having a global workqueue for all controllers, it makes
more sense to have a workqueue per controller.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:34:03 +02:00
Gustavo F. Padovan
844c097242 Bluetooth: Fix spec error in the RemoteBusy Logic
On the receipt of an RR(P=1) under RemoteBusy set to TRUE(on the RECV
state table) we have to call sendIorRRorRNR(F=1) and just after set
RemoteBusy to False. This leads to a freeze in the sending process since
it's not allowed send data with RemoteBusy set to true and no one
call SendPending-I-Frames after set RemoteBusy to false(The last action
for that event).

Actually sendIorRRorRNR() calls SendPending-I-Frames but at that moment
RemoteBusy is still True and we cannot send any frame, after, no one
calls SendPending-I-Frames again and the sending process stops.

The solution here is to set RemoteBusy to false inside
SendPending-I-Frames just before call SendPending-I-Frames. That will
make SendPending-I-Frames able to send frames. This solution is similar
to what RR(P=0)(F=0) on the RECV table and RR(P=1) on the SREJ_SENT
table do.

Actually doesn't make any sense call SendPending-I-Frames if we can send
any frame, i. e., RemoteBusy is True.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
Gustavo F. Padovan
4178ba462a Bluetooth: Prevents buffer overflow on l2cap_ertm_reassembly_sdu()
The checks should be done before the the memcpy to avoid buffer
overflow.

Reported-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
Gustavo F. Padovan
dfc909befb Bluetooth: Fix race condition on l2cap_ertm_send()
l2cap_ertm_send() can be called both from user context and bottom half
context. The socket locks for that contexts are different, the user
context uses a mutex(which can sleep) and the second one uses a
spinlock_bh. That creates a race condition when we have interruptions on
both contexts at the same time.

The better way to solve this is to add a new spinlock to lock
l2cap_ertm_send() and the vars it access. The other solution was to defer
l2cap_ertm_send() with a workqueue, but we the sending process already
has one defer on the hci layer. It's not a good idea add another one.

The patch refactor the code to create l2cap_retransmit_frames(), then we
encapulate the lock of l2cap_ertm_send() for some call. It also changes
l2cap_retransmit_frame() to l2cap_retransmit_one_frame() to avoid
confusion

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
Gustavo F. Padovan
6161c0382b Bluetooth: Add wait_queue to wait ack of all sent packets
To guarantee that all packets we sent were received we need to wait for
theirs ack before shutdown the socket.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
Gustavo F. Padovan
1890d36bb5 Bluetooth: Implement Local Busy Condition handling
Supports Local Busy condition handling through a waitqueue that wake ups
each 200ms and try to push the packets to the upper layer. If it can
push all the queue then it leaves the Local Busy state.

The patch modifies the behaviour of l2cap_ertm_reassembly_sdu() to
support retry of the push operation.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
João Paulo Rechi Vita
9b53350d3c Bluetooth: Completes the I-frame tx_seq check logic on RECV
Add checks for invalid tx_seq and fixes the duplicated tx_seq check.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:53 +02:00
Gustavo F. Padovan
18778a63dd Bluetooth: Implement missing parts of the Invalid Frame Detection
There is a plenty of situation where ERTM shall close the channel, this
commit treats the cases regarding Invalid Frame Detection.
It create one reassembly SDU function for ERTM and other for Streaming
Mode to make the Invalid Frame Detection handling less complex.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
f11d676da4 Bluetooth: Refactor l2cap_retransmit_frame()
Make the code flow cleaner and changes the function to void.
It also fixes a potential NULL dereference with skb.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
9a9c6a3441 Bluetooth: Make hci_send_acl() void
hci_send_acl can't fail, so we can make it void. This patch changes
that and all the funcions that use hci_send_acl().
That change exposed a bug on sending connectionless data. We were not
reporting the lenght send back to the user space.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
ff12fd6433 Bluetooth: Fix lockdep annotation on ERTM
A spin_lock_init() call was missing. :)

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
9b16dc6551 Bluetooth: Check if we really are in WAIT_F when F bit comes
F-bit set should be processed only if we are in the WAIT_F state.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
a2e12a2a31 Bluetooth: Remove unneeded control vars
Trivial clean up.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
0301ef04b5 Bluetooth: Remove set of SrejSaveReqSeq under receipt of REJ frame
That action is not specified by the ERTM spec, so removing it.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:52 +02:00
Gustavo F. Padovan
59203a21a5 Bluetooth: Fix errors reported by checkpatch.pl
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
Gustavo F. Padovan
44651b85cc Bluetooth: Don't set control bits to zero first
We can set the SAR bits in the control field directly.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
João Paulo Rechi Vita
01760bdde9 Bluetooth: Close L2CAP channel on invalid ReqSeq
Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
Gustavo F. Padovan
afefdbc4cf Bluetooth: Fix SDU reassembly under SREJ
The code was reusing the control var without its reinitialization.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
João Paulo Rechi Vita
0041ecfa30 Bluetooth: Check if mode is supported on getsockopt
Add this check to getsockopt makes possible to fail early instead of
waiting until listen / connect.

Signed-off-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
Gustavo F. Padovan
bd3c9e255e Bluetooth: Add SOCK_STREAM support to L2CAP
if enable_ertm is true and we have SOCK_STREAM the default mode will be
ERTM, otherwise Basic Mode.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
Gustavo F. Padovan
84fb0a6334 Bluetooth: Add Kconfig option for L2CAP Extended Features
The L2CAP Extended Features are still unstable and under development,
so we are adding them under the EXPERIMENTAL flag to get more feedback
on them. L2CAP Extended Features includes the Enhanced Retransmission
and Streaming Modes, Frame Check Sequence (FCS), and Segmentation and
Reassemby (SAR).

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:51 +02:00
Gustavo F. Padovan
3b1a9f3fa6 Bluetooth: Optimize SREJ_QUEUE append
When the I-frame received is the expected, i.e., its tx_seq is equal to
expected_tx_seq and we are under a SREJ, we can just add it to the tail
of the list. Doing that we change the complexity from O(n) to O(1).

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:50 +02:00
Gustavo F. Padovan
812e737e29 Bluetooth: Fix drop of acked packets on ERTM
l2cap_drop_acked_frames() was droping not sent packets, causing them to
be not transmitted.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:50 +02:00
Gustavo F. Padovan
0ee0d20855 Bluetooth: Fix crash when monitor timeout expires
The code was crashing due to a invalid access to hci_conn after the
channel disconnect.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:50 +02:00
Gustavo F. Padovan
f6e6b16823 Bluetooth: Fix bug when retransmitting I-frames
If there is no frames to retransmit l2cap was crashing the kernel, now
we check if the queue is empty first.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:50 +02:00
Gustavo F. Padovan
68d7f0ce91 Bluetooth: Enable option to configure Max Transmission value via sockopt
With the sockopt extension we can set a per-channel MaxTx value.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10 09:28:50 +02:00