This config option causes the warning in init_default_hcalls to fire
because the TCE handlers are in the default hcall list but not
implemented.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-9-npiggin@gmail.com
The va argument is not used in the function or set by its asm caller,
so remove it to be safe.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-8-npiggin@gmail.com
This SPR is set to 0 twice when exiting the guest.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-7-npiggin@gmail.com
Prevent radix guests setting LPCR[TC]. This bit only applies to hash
partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-6-npiggin@gmail.com
These are already disallowed by H_SET_MODE from the guest, also disallow
these by updating LPCR directly.
AIL modes can affect the host interrupt behaviour while the guest LPCR
value is set, so filter it here too.
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-5-npiggin@gmail.com
Guest LPCR depends on hardware type, and future changes will add
restrictions based on errata and guest MMU mode. Move this logic
to a common function and use it for the cases where the guest
wants to update its LPCR (or the LPCR of a nested guest).
This also adds a warning in other places that set or update LPCR
if we try to set something that would have been disallowed by
the filter, as a sanity check.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-4-npiggin@gmail.com
This will get a bit more complicated in future patches. Move it
into the helper function.
This change allows the L1 hypervisor to determine some of the LPCR
bits that the L0 is using to run it, which could be a privilege
violation (LPCR is HV-privileged), although the same problem exists
now for HFSCR for example. Discussion of the HV privilege issue is
ongoing and can be resolved with a later change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-3-npiggin@gmail.com
The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.
This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.
There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.
Fixes: 95a6432ce9 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3eMQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP6TQf5ARpUyq3oo+13albwg+zNca6hzR8i
Vl7dpoR3bSJCN3sTYFnlL9eXw5TxgeUL2nqKqma6ddZDNDEBLT2Bq8rcFkbi4pUf
n7av76EEq74HW/jlUhKVug7Q5Dm5DiKC6BOH3RVuKHbr6iZseyF3jXZSX0Ppf0yF
gvoy6cGyMW60NVLN5tuGeOjVQ1fxziE0SqB90fXuiWgZ5rzIBfbqJV7EOOZsGO67
/LHSaEpvKutsc2a+Hx76yQNJjAbb2/O+4Bo5/RqfdqS5tRLGBzYggdJjLvAPvd6P
pTNtDCnErvBZQfMedEQyHYuBL2Ca59fOp6i/ekOM2I+m7816+kSkdTMt2g==
=iMHY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"x86:
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups:
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: SVM: Fix nested VM-Exit on #GP interception handling
KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created
KVM: x86/mmu: Consider the hva in mmu_notifier retry
KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault
KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID
KVM: nSVM: prepare guest save area while is_guest_mode is true
KVM: x86/mmu: Remove a variety of unnecessary exports
KVM: x86: Fold "write-protect large" use case into generic write-protect
KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML
KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging
KVM: x86: Further clarify the logic and comments for toggling log dirty
KVM: x86: Move MMU's PML logic to common code
KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function
KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()
KVM: nVMX: Disable PML in hardware when running L2
KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs
KVM: x86/mmu: Pass the memslot to the rmap callbacks
KVM: x86/mmu: Split out max mapping level calculation to helper
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
KVM: nVMX: no need to undo inject_page_fault change on nested vmexit
...
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
Track the range being invalidated by mmu_notifier and skip page fault
retries if the fault address is not affected by the in-progress
invalidation. Handle concurrent invalidations by finding the minimal
range which includes all ranges being invalidated. Although the combined
range may include unrelated addresses and cannot be shrunk as individual
invalidation operations complete, it is unlikely the marginal gains of
proper range tracking are worth the additional complexity.
The primary benefit of this change is the reduction in the likelihood of
extreme latency when handing a page fault due to another thread having
been preempted while modifying host virtual addresses.
Signed-off-by: David Stevens <stevensd@chromium.org>
Message-Id: <20210222024522.1751719-3-stevensd@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following coccicheck warnings:
./arch/powerpc/kvm/book3s_xive.c:1856:2-17: WARNING: Assignment of 0/1
to bool variable.
./arch/powerpc/kvm/book3s_xive.c:1854:2-17: WARNING: Assignment of 0/1
to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612680192-43116-1-git-send-email-jiapeng.chong@linux.alibaba.com
Commit 68ad28a4cd ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") incorrectly removed the radix host instruction patch to skip
re-loading the host SLB entries when exiting from a hash
guest. Restore it.
Fixes: 68ad28a4cd ("KVM: PPC: Book3S HV: Fix radix guest SLB side channel")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Commit 68ad28a4cd ("KVM: PPC: Book3S HV: Fix radix guest SLB side
channel") changed the older guest entry path, with the side effect
that vcpu->arch.slb_max no longer gets cleared for a radix guest.
This means that a HPT guest which loads some SLB entries, switches to
radix mode, runs the guest using the old guest entry path (e.g.,
because the indep_threads_mode module parameter has been set to
false), and then switches back to HPT mode would now see the old SLB
entries being present, whereas previously it would have seen no SLB
entries.
To avoid changing guest-visible behaviour, this adds a store
instruction to clear vcpu->arch.slb_max for a radix guest using the
old guest entry path.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
These machines don't support running both MMU types at the same time,
so remove the KVM_CAP_PPC_MMU_HASH_V3 capability when the host is
using Radix MMU.
[paulus@ozlabs.org - added defensive check on
kvmppc_hv_ops->hash_v3_possible]
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Facility Status and Control Register is a privileged SPR that
defines the availability of some features in problem state. Since it
can be written by the guest, we must restore it to the previous host
value after guest exit.
This restoration is currently done by taking the value from
current->thread.fscr, which in the P9 path is not enough anymore
because the guest could context switch the QEMU thread, causing the
guest-current value to be saved into the thread struct.
The above situation manifested when running a QEMU linked against a
libc with System Call Vectored support, which causes scv
instructions to be run by QEMU early during the guest boot (during
SLOF), at which point the FSCR is 0 due to guest entry. After a few
scv calls (1 to a couple hundred), the context switching happens and
the QEMU thread runs with the guest value, resulting in a Facility
Unavailable interrupt.
This patch saves and restores the host value of FSCR in the inner
guest entry loop in a way independent of current->thread.fscr. The old
way of doing it is still kept in place because it works for the old
entry path.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Eliminate the following coccicheck warning:
./arch/powerpc/kvm/booke.c:701:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
IH=6 may preserve hypervisor real-mode ERAT entries and is the
recommended SLBIA hint for switching partitions.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The slbmte instruction is legal in radix mode, including radix guest
mode. This means radix guests can load the SLB with arbitrary data.
KVM host does not clear the SLB when exiting a guest if it was a
radix guest, which would allow a rogue radix guest to use the SLB as
a side channel to communicate with other guests.
Fix this by ensuring the SLB is cleared when coming out of a radix
guest. Only the first 4 entries are a concern, because radix guests
always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia
is not used (except in a non-performance-critical path) because it
can clear cached translations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This reverts much of commit c01015091a ("KVM: PPC: Book3S HV: Run HPT
guests on POWER9 radix hosts"), which was required to run HPT guests on
RPT hosts on early POWER9 CPUs without support for "mixed mode", which
meant the host could not run with MMU on while guests were running.
This code has some corner case bugs, e.g., when the guest hits a machine
check or HMI the primary locks up waiting for secondaries to switch LPCR
to host, which they never do. This could all be fixed in software, but
most CPUs in production have mixed mode support, and those that don't
are believed to be all in installations that don't use this capability.
So simplify things and remove support.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether
KVM supports 2nd DAWR or not. The capability is by default disabled
even when the underlying CPU supports 2nd DAWR. QEMU needs to check
and enable it manually to use the feature.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR.
DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/
unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR.
Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Power10 is introducing a second DAWR (Data Address Watchpoint
Register). Use real register names (with suffix 0) from ISA for
current macros and variables used by kvm. One exception is
KVM_REG_PPC_DAWR. Keep it as it is because it's uapi so changing it
will break userspace.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On powerpc, L1 hypervisor takes help of L0 using H_ENTER_NESTED
hcall to load L2 guest state in cpu. L1 hypervisor prepares the
L2 state in struct hv_guest_state and passes a pointer to it via
hcall. Using that pointer, L0 reads/writes that state directly
from/to L1 memory. Thus L0 must be aware of hv_guest_state layout
of L1. Currently it uses version field to achieve this. i.e. If
L0 hv_guest_state.version != L1 hv_guest_state.version, L0 won't
allow nested kvm guest.
This restriction can be loosened up a bit. L0 can be taught to
understand older layout of hv_guest_state, if we restrict the
new members to be added only at the end, i.e. we can allow
nested guest even when L0 hv_guest_state.version > L1
hv_guest_state.version. Though, the other way around is not
possible.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Interrupts that occur in kernel mode expect that context tracking
is set to kernel. Enabling local irqs before context tracking
switches from guest to host means interrupts can come in and trigger
warnings about wrong context, and possibly worse.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-3-npiggin@gmail.com
book3s/32 kvm is designed with the assumption that
an FPU is always present.
Force selection of FPU support in the kernel when
build KVM.
Fixes: 7d68c89169 ("powerpc/32s: Allow deselecting CONFIG_PPC_FPU on mpc832x")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74461a99fa1466f361532ca794ca0753be3d9f86.1611038044.git.christophe.leroy@csgroup.eu
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes: acc9eb9305 ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
According to ISAv3.1 and ISAv3.0b, the msgsndp is described to split
RB in:
msgtype <- (RB) 32:36
payload <- (RB) 37:63
t <- (RB) 57:63
The current way of getting 'msgtype', and 't' is missing their MSB:
msgtype: ((arg >> 27) & 0xf) : Gets (RB) 33:36, missing bit 32
t: (arg &= 0x3f) : Gets (RB) 58:63, missing bit 57
Fixes this by applying the correct mask.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208215707.31149-1-leobras.c@gmail.com
Fix the following coccinelle warnings:
./arch/powerpc/kvm/book3s_xics.c:476:3-15: WARNING: Assignment of 0/1 to bool variable
./arch/powerpc/kvm/book3s_xics.c:504:3-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1604730382-5810-1-git-send-email-kaixuxia@tencent.com
When the XIVE resources are allocated at the HW level, the VP
structures describing the vCPUs of a guest are distributed among
the chips to optimize the PowerBUS usage. For best performance, the
guest vCPUs can be pinned to match the VP structure distribution.
Currently, the VP identifiers are deduced from the vCPU id using
the kvmppc_pack_vcpu_id() routine which is not incorrect but not
optimal either. It VSMT is used, the result is not continuous and
the constraints on HW resources described above can not be met.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-14-clg@kaod.org
This is a simple cleanup to identify easily all flags of the XIVE
interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI
are the escalations used to wake up vCPUs in KVM. They are handled
very differently from the rest.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-3-clg@kaod.org
This is useful to track allocation of the HW resources on per guest
basis. Making sure IPIs are local to the chip of the vCPUs reduces
rerouting between interrupt controllers and gives better performance
in case of pinning. Checking the distribution of VP structures on the
chips also helps in reducing PowerBUS traffic.
[ clg: resurrected show_sources and reworked ouput ]
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-2-clg@kaod.org
No supported processor implements this mode. Setting the bit in
MSR values can be a bit confusing (and would prevent the bit from
ever being reused). Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201106045340.1935841-1-npiggin@gmail.com
In several places, inline assembly uses the "%Un" modifier
to enable the use of instruction with update form addressing,
but the associated "<>" constraint is missing.
As mentioned in previous patch, this fails with gcc 4.9, so
"<>" can't be used directly.
Use UPD_CONSTR macro everywhere %Un modifier is used.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62eab5ca595485c192de1765bdac099f633a21d0.1603358942.git.christophe.leroy@csgroup.eu
With power7 and above we expect the cpu to support keys. The
number of keys are firmware controlled based on device tree.
PR KVM do not expose key details via device tree. Hence when running with PR KVM
we do run with MMU_FTR_KEY support disabled. But we can still
get updates on UAMOR. Hence ignore access to them and for mfstpr return
0 indicating no AMR/IAMR update is no allowed.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-3-aneesh.kumar@linux.ibm.com
A number of machine check exceptions are triggerable by the guest.
Ratelimit these to avoid a guest flooding the host console and logs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use dedicated ratelimit state, not printk_ratelimit()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-5-npiggin@gmail.com
Guests that can deal with machine checks would actually prefer the
hypervisor not to try recover for them. For example if SLB multi-hits
are recovered by the hypervisor by clearing the SLB then the guest
will not be able to log the contents and debug its programming error.
If guests don't register for FWNMI, they may not be so capable and so
the hypervisor will continue to recover for those.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-4-npiggin@gmail.com
Commit 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP block size
configurable") updated kvmppc_xive_vcpu_id_valid() in a way that
allows userspace to trigger an assertion in skiboot and crash the host:
[ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0
[ 696.186314757,0] Assert fail: hw/xive.c:2370:0
[ 696.186342458,0] Aborting!
xive-kvCPU 0043 Backtrace:
S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48
S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c
S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34
S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0
S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c
S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124
S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134
--- OPAL call token: 0x8a caller R1: 0xc000001f28563850 ---
XIVE maintains the interrupt context state of non-dispatched vCPUs in
an internal VP structure. We allocate a bunch of those on startup to
accommodate all possible vCPUs. Each VP has an id, that we derive from
the vCPU id for efficiency:
static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server)
{
return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
}
The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was
limitting the number of concurrent VMs because the VP space is
limited on the HW. Since most of the time, VMs run with a lot less
vCPUs, commit 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP
block size configurable") gave the possibility for userspace to
tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS
attribute.
The check in kvmppc_pack_vcpu_id() was changed from
cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode
to
cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode
The previous check was based on the fact that the VP block had
KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees
that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the
size of the VP block, but kvmppc_pack_vcpu_id() has nothing to
do with it and it certainly doesn't ensure that the packed vCPU
ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might
thus return true when the VM was configured with a non-standard
VSMT mode, even if the packed vCPU id is higher than what we
expect. We end up using an unallocated VP id, which confuses
OPAL. The assert in OPAL is probably abusive and should be
converted to a regular error that the kernel can handle, but
we shouldn't really use broken VP ids in the first place.
Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed
vCPU id is below xive->nr_servers, which is explicitly what we
want.
Fixes: 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
With POWER10, single tlbiel instruction invalidates all the congruence
class of the TLB and hence we need to issue only one tlbiel with SET=0.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201007053305.232879-1-aneesh.kumar@linux.ibm.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
This should be const, so make it so.
Signed-off-by: Joe Perches <joe@perches.com>
Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
Patch series "memblock: seasonal cleaning^w cleanup", v3.
These patches simplify several uses of memblock iterators and hide some of
the memblock implementation details from the rest of the system.
This patch (of 17):
The memory size calculation in kvm_cma_reserve() traverses memblock.memory
rather than simply call memblock_phys_mem_size(). The comment in that
function suggests that at some point there should have been call to
memblock_analyze() before memblock_phys_mem_size() could be used. As of
now, there is no memblock_analyze() at all and memblock_phys_mem_size()
can be used as soon as cold-plug memory is registered with memblock.
Replace loop over memblock.memory with a call to memblock_phys_mem_size().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20200818151634.14343-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20200818151634.14343-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In support of device-dax growing the ability to front physically
dis-contiguous ranges of memory, update devm_memremap_pages() to track
multiple ranges with a single reference counter and devm instance.
Convert all [devm_]memremap_pages() users to specify the number of ranges
they are mapping in their 'struct dev_pagemap' instance.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.co
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103789.4062302.18426128170217903785.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106116293.30709.13350662794915396198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'struct resource' in 'struct dev_pagemap' is only used for holding
resource span information. The other fields, 'name', 'flags', 'desc',
'parent', 'sibling', and 'child' are all unused wasted space.
This is in preparation for introducing a multi-range extension of
devm_memremap_pages().
The bulk of this change is unwinding all the places internal to libnvdimm
that used 'struct resource' unnecessarily, and replacing instances of
'struct dev_pagemap'.res with 'struct dev_pagemap'.range.
P2PDMA had a minor usage of the resource flags field, but only to report
failures with "%pR". That is replaced with an open coded print of the
range.
[dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()]
Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen]
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103173.4062302.768998885691711532.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106115761.30709.13539840236873663620.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Build the kernel with `C=2`:
arch/powerpc/kvm/book3s_hv_nested.c:572:25: warning: symbol
'kvmhv_alloc_nested' was not declared. Should it be static?
arch/powerpc/kvm/book3s_64_mmu_radix.c:350:6: warning: symbol
'kvmppc_radix_set_pte_at' was not declared. Should it be static?
arch/powerpc/kvm/book3s_hv.c:3568:5: warning: symbol
'kvmhv_p9_guest_entry' was not declared. Should it be static?
arch/powerpc/kvm/book3s_hv_rm_xics.c:767:15: warning: symbol 'eoi_rc'
was not declared. Should it be static?
arch/powerpc/kvm/book3s_64_vio_hv.c:240:13: warning: symbol
'iommu_tce_kill_rm' was not declared. Should it be static?
arch/powerpc/kvm/book3s_64_vio.c:492:6: warning: symbol
'kvmppc_tce_iommu_do_map' was not declared. Should it be static?
arch/powerpc/kvm/book3s_pr.c:572:6: warning: symbol 'kvmppc_set_pvr_pr'
was not declared. Should it be static?
Those symbols are used only in the files that define them so make them
static to fix the warnings.
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The variable ret is being initialized with '-ENOMEM' that is meaningless.
So remove it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER8 and POWER9 machines have a hardware deviation where generation
of a hypervisor decrementer exception is suppressed if the HDICE bit
in the LPCR register is 0 at the time when the HDEC register
decrements from 0 to -1. When entering a guest, KVM first writes the
HDEC register with the time until it wants the CPU to exit the guest,
and then writes the LPCR with the guest value, which includes
HDICE = 1. If HDEC decrements from 0 to -1 during the interval
between those two events, it is possible that we can enter the guest
with HDEC already negative but no HDEC exception pending, meaning that
no HDEC interrupt will occur while the CPU is in the guest, or at
least not until HDEC wraps around. Thus it is possible for the CPU to
keep executing in the guest for a long time; up to about 4 seconds on
POWER8, or about 4.46 years on POWER9 (except that the host kernel
hard lockup detector will fire first).
To fix this, we set the LPCR[HDICE] bit before writing HDEC on guest
entry.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The current nested KVM code does not support HPT guests. This is
informed/enforced in some ways:
- Hosts < P9 will not be able to enable the nested HV feature;
- The nested hypervisor MMU capabilities will not contain
KVM_CAP_PPC_MMU_HASH_V3;
- QEMU reflects the MMU capabilities in the
'ibm,arch-vec-5-platform-support' device-tree property;
- The nested guest, at 'prom_parse_mmu_model' ignores the
'disable_radix' kernel command line option if HPT is not supported;
- The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT.
There is, however, still a way to start a HPT guest by using
max-compat-cpu=power8 at the QEMU machine options. This leads to the
guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB
ioctl.
With the guest set to hash, the nested hypervisor goes through the
entry path that has no knowledge of nesting (kvmppc_run_vcpu) and
crashes when it tries to execute an hypervisor-privileged (mtspr
HDEC) instruction at __kvmppc_vcore_entry:
root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ...
<snip>
[ 538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1
[ 538.543355] NIP: c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0
[ 538.543417] REGS: c0000013e91e33b0 TRAP: 0700 Not tainted (5.9.0-rc4)
[ 538.543470] MSR: 8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 22422882 XER: 20040000
[ 538.543546] CFAR: c00800000753f4b0 IRQMASK: 3
GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000
GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72
GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0
GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008
GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8
GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000
GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001
GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001
[ 538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv]
[ 538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv]
[ 538.544173] Call Trace:
[ 538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable)
[ 538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv]
[ 538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv]
[ 538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[ 538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm]
[ 538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm]
[ 538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90
[ 538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0
[ 538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c
[ 538.544787] Instruction dump:
[ 538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002
[ 538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd
[ 538.544953] ---[ end trace 74423e2b948c2e0c ]---
This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in
the nested hypervisor, causing QEMU to abort.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
ENOTSUPP is a linux only thingy, the value of which is unknown to
userspace, not to be confused with ENOTSUP which linux maps to
EOPNOTSUPP, as permitted by POSIX [1]:
[EOPNOTSUPP]
Operation not supported on socket. The type of socket (address family
or protocol) does not support the requested operation. A conforming
implementation may assign the same values for [EOPNOTSUPP] and [ENOTSUP].
Return -EOPNOTSUPP instead of -ENOTSUPP for the following ioctls:
- KVM_GET_FPU for Book3s and BookE
- KVM_SET_FPU for Book3s and BookE
- KVM_GET_DIRTY_LOG for BookE
This doesn't affect QEMU which doesn't call the KVM_GET_FPU and
KVM_SET_FPU ioctls on POWER anyway since they are not supported,
and _buggily_ ignores anything but -EPERM for KVM_GET_DIRTY_LOG.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The ISA v3.1 the copy-paste facility has a new memory move functionality
which allows the copy buffer to be pasted to domestic memory (RAM) as
opposed to foreign memory (accelerator).
This means the POWER9 trick of avoiding the cp_abort on context switch if
the process had not mapped foreign memory does not work on POWER10. Do the
cp_abort unconditionally there.
KVM must also cp_abort on guest exit to prevent copy buffer state leaking
between contexts.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200825075535.224536-1-npiggin@gmail.com
Similarly to what was done with XICS-on-XIVE and XIVE native KVM devices
with commit 5422e95103 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy'
method by a 'release' method"), convert the historical XICS KVM device to
implement the 'release' method. This is needed to run nested guests with
an in-kernel IRQ chip. A typical POWER9 guest can select XICS or XIVE
during boot, which requires to be able to destroy and to re-create the
KVM device. Only the historical XICS KVM device is available under pseries
at the current time and it still uses the legacy 'destroy' method.
Switching to 'release' means that vCPUs might still be running when the
device is destroyed. In order to avoid potential use-after-free, the
kvmppc_xics structure is allocated on first usage and kept around until
the VM exits. The same pointer is used each time a KVM XICS device is
being created, but this is okay since we only have one per VM.
Clear the ICP of each vCPU with vcpu->mutex held. This ensures that the
next time the vCPU resumes execution, it won't be going into the XICS
code anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJfH7NMAAoJEJ2a6ncsY3GfkZoH/1be9wpKse2wTke3UcgqGnuX
WkOXMqvTG/1goHIuPKm0QP9O3RU3m2EnXqGJjkg71zVYierzMONhJblfU4XDdk2E
FbD2tjNEGuQGNXp8mrHFuwAB6zRQTQevsxsIPYU7KDZ8wKavSAKtayJNEfAf2inI
YB49Vj8N5djmH3Y+T41XsKx8ut4n1o82MTQsuiHwbtZt1GVO9N7OXW4SZvYbu18v
CUp3GIkiFU+VVQv+9a1a1c0w7DendNGL2mNF18tQohwV+NOFv0wsP4ZOONBE8c70
myo9SAuxpOZfeENxk7Cw323kZ2095e/6IDSUeQ91xp/FYmq6YTXmAvc//MKKaow=
=Lnvu
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6
PPC KVM update for 5.9
- Improvements and bug-fixes for secure VM support, giving reduced startup
time and memory hotplug support.
- Locking fixes in nested KVM code
- Increase number of guests supported by HV KVM to 4094
- Preliminary POWER10 support
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
With the proposed change in percpu bootmem allocator to use page
mapping [1], the percpu first chunk memory area can come from vmalloc
ranges. This makes the HMI (Hypervisor Maintenance Interrupt) handler
crash the kernel whenever percpu variable is accessed in real mode.
This patch fixes this issue by moving the HMI IRQ stat inside paca for
safe access in realmode.
[1] https://lore.kernel.org/linuxppc-dev/20200608070904.387440-1-aneesh.kumar@linux.ibm.com/
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159290806973.3642154.5244613424529764050.stgit@jupiter
Current kernel gives:
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
With the fix
[ 0.000000] kvm_cma_reserve: reserving 26214 MiB for global area
[ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000
[ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node
[ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713150749.25245-2-aneesh.kumar@linux.ibm.com
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a secure memslot is dropped, all the pages backed in the secure
device (aka really backed by secure memory by the Ultravisor)
should be paged out to a normal page. Previously, this was
achieved by triggering the page fault mechanism which is calling
kvmppc_svm_page_out() on each pages.
This can't work when hot unplugging a memory slot because the memory
slot is flagged as invalid and gfn_to_pfn() is then not trying to access
the page, so the page fault mechanism is not triggered.
Since the final goal is to make a call to kvmppc_svm_page_out() it seems
simpler to call directly instead of triggering such a mechanism. This
way kvmppc_uvmem_drop_pages() can be called even when hot unplugging a
memslot.
Since kvmppc_uvmem_drop_pages() is already holding kvm->arch.uvmem_lock,
the call to __kvmppc_svm_page_out() is made. As
__kvmppc_svm_page_out needs the vma pointer to migrate the pages,
the VMA is fetched in a lazy way, to not trigger find_vma() all
the time. In addition, the mmap_sem is held in read mode during
that time, not in write mode since the virual memory layout is not
impacted, and kvm->arch.uvmem_lock prevents concurrent operation
on the secure device.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[modified check on the VMA in kvmppc_uvmem_drop_pages]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[modified the changelog description]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmppc_svm_page_out() will need to be called by kvmppc_uvmem_drop_pages()
so move it up earlier in this file.
Furthermore it will be interesting to call this function when already
holding the kvm->arch.uvmem_lock, so prefix the original function with __
and remove the locking in it, and introduce a wrapper which call that
function with the lock held.
There is no functional change.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a memory slot is hot plugged to a SVM, PFNs associated with the
GFNs in that slot must be migrated to the secure-PFNs, aka device-PFNs.
Call kvmppc_uv_migrate_mem_slot() to accomplish this.
Disable page-merge for all pages in the memory slot.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[rearranged the code, and modified the commit log]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Ultravisor is expected to explicitly call H_SVM_PAGE_IN for all the
pages of the SVM before calling H_SVM_INIT_DONE. This causes a huge
delay in tranistioning the VM to SVM. The Ultravisor is only interested
in the pages that contain the kernel, initrd and other important data
structures. The rest contain throw-away content.
However if not all pages are requested by the Ultravisor, the Hypervisor
continues to consider the GFNs corresponding to the non-requested pages
as normal GFNs. This can lead to data-corruption and undefined behavior.
In H_SVM_INIT_DONE handler, move all the PFNs associated with the SVM's
GFNs to secure-PFNs. Skip the GFNs that are already Paged-in or Shared
or Paged-in followed by a Paged-out.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
During the life of SVM, its GFNs transition through normal, secure and
shared states. Since the kernel does not track GFNs that are shared, it
is not possible to disambiguate a shared GFN from a GFN whose PFN has
not yet been migrated to a secure-PFN. Also it is not possible to
disambiguate a secure-GFN from a GFN whose GFN has been pagedout from
the ultravisor.
The ability to identify the state of a GFN is needed to skip migration
of its PFN to secure-PFN during ESM transition.
The code is re-organized to track the states of a GFN as explained
below.
************************************************************************
1. States of a GFN
---------------
The GFN can be in one of the following states.
(a) Secure - The GFN is secure. The GFN is associated with
a Secure VM, the contents of the GFN is not accessible
to the Hypervisor. This GFN can be backed by a secure-PFN,
or can be backed by a normal-PFN with contents encrypted.
The former is true when the GFN is paged-in into the
ultravisor. The latter is true when the GFN is paged-out
of the ultravisor.
(b) Shared - The GFN is shared. The GFN is associated with a
a secure VM. The contents of the GFN is accessible to
Hypervisor. This GFN is backed by a normal-PFN and its
content is un-encrypted.
(c) Normal - The GFN is a normal. The GFN is associated with
a normal VM. The contents of the GFN is accesible to
the Hypervisor. Its content is never encrypted.
2. States of a VM.
---------------
(a) Normal VM: A VM whose contents are always accessible to
the hypervisor. All its GFNs are normal-GFNs.
(b) Secure VM: A VM whose contents are not accessible to the
hypervisor without the VM's consent. Its GFNs are
either Shared-GFN or Secure-GFNs.
(c) Transient VM: A Normal VM that is transitioning to secure VM.
The transition starts on successful return of
H_SVM_INIT_START, and ends on successful return
of H_SVM_INIT_DONE. This transient VM, can have GFNs
in any of the three states; i.e Secure-GFN, Shared-GFN,
and Normal-GFN. The VM never executes in this state
in supervisor-mode.
3. Memory slot State.
------------------
The state of a memory slot mirrors the state of the
VM the memory slot is associated with.
4. VM State transition.
--------------------
A VM always starts in Normal Mode.
H_SVM_INIT_START moves the VM into transient state. During this
time the Ultravisor may request some of its GFNs to be shared or
secured. So its GFNs can be in one of the three GFN states.
H_SVM_INIT_DONE moves the VM entirely from transient state to
secure-state. At this point any left-over normal-GFNs are
transitioned to Secure-GFN.
H_SVM_INIT_ABORT moves the transient VM back to normal VM.
All its GFNs are moved to Normal-GFNs.
UV_TERMINATE transitions the secure-VM back to normal-VM. All
the secure-GFN and shared-GFNs are tranistioned to normal-GFN
Note: The contents of the normal-GFN is undefined at this point.
5. GFN state implementation:
-------------------------
Secure GFN is associated with a secure-PFN; also called uvmem_pfn,
when the GFN is paged-in. Its pfn[] has KVMPPC_GFN_UVMEM_PFN flag
set, and contains the value of the secure-PFN.
It is associated with a normal-PFN; also called mem_pfn, when
the GFN is pagedout. Its pfn[] has KVMPPC_GFN_MEM_PFN flag set.
The value of the normal-PFN is not tracked.
Shared GFN is associated with a normal-PFN. Its pfn[] has
KVMPPC_UVMEM_SHARED_PFN flag set. The value of the normal-PFN
is not tracked.
Normal GFN is associated with normal-PFN. Its pfn[] has
no flag set. The value of the normal-PFN is not tracked.
6. Life cycle of a GFN
--------------------
--------------------------------------------------------------
| | Share | Unshare | SVM |H_SVM_INIT_DONE|
| |operation |operation | abort/ | |
| | | | terminate | |
-------------------------------------------------------------
| | | | | |
| Secure | Shared | Secure |Normal |Secure |
| | | | | |
| Shared | Shared | Secure |Normal |Shared |
| | | | | |
| Normal | Shared | Secure |Normal |Secure |
--------------------------------------------------------------
7. Life cycle of a VM
--------------------
--------------------------------------------------------------------
| | start | H_SVM_ |H_SVM_ |H_SVM_ |UV_SVM_ |
| | VM |INIT_START|INIT_DONE|INIT_ABORT |TERMINATE |
| | | | | | |
--------- ----------------------------------------------------------
| | | | | | |
| Normal | Normal | Transient|Error |Error |Normal |
| | | | | | |
| Secure | Error | Error |Error |Error |Normal |
| | | | | | |
|Transient| N/A | Error |Secure |Normal |Normal |
--------------------------------------------------------------------
************************************************************************
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Page-merging of pages in memory-slots associated with a Secure VM
is disabled in H_SVM_PAGE_IN handler.
This operation should have been done the much earlier; the moment the VM
is initiated for secure-transition. Delaying this operation increases
the probability for those pages to acquire new references, making it
impossible to migrate those pages in H_SVM_PAGE_IN handler.
Disable page-migration in H_SVM_INIT_START handling.
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Without this fix, git is confused. It generates wrong
function context for code changes in subsequent patches.
Weird, but true.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200723090813.303838-8-ravi.bangoria@linux.ibm.com
On PAPR+ the hcall() on 0x1B0 is called H_DISABLE_AND_GET, but got
defined as H_DISABLE_AND_GETC instead.
This define was introduced with a typo in commit <b13a96cfb055>
("[PATCH] powerpc: Extends HCALL interface for InfiniBand usage"), and was
later used without having the typo noticed.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200707004812.190765-1-leobras.c@gmail.com
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.
[paulus@ozlabs.org - Fixed places that were missed in book3s_interrupts.S]
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Power ISA v3.1 has added new performance monitoring unit (PMU) special
purpose registers (SPRs). They are:
Monitor Mode Control Register 3 (MMCR3)
Sampled Instruction Event Register A (SIER2)
Sampled Instruction Event Register B (SIER3)
Add support to save/restore these new SPRs while entering/exiting
guest. Also include changes to support KVM_REG_PPC_MMCR3/SIER2/SIER3.
Add new SPRs to KVM API documentation.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-6-git-send-email-atrajeev@linux.vnet.ibm.com
Currently `kvm_vcpu_arch` stores all Monitor Mode Control registers
in a flat array in order: mmcr0, mmcr1, mmcra, mmcr2, mmcrs
Split this to give mmcra and mmcrs its own entries in vcpu and
use a flat array for mmcr0 to mmcr2. This patch implements this
cleanup to make code easier to read.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Fix MMCRA/MMCR2 uapi breakage as noted by paulus]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1594996707-3727-3-git-send-email-atrajeev@linux.vnet.ibm.com
The kvm_vcpu_read_guest/kvm_vcpu_write_guest used for nested guests
eventually call srcu_dereference_check to dereference a memslot and
lockdep produces a warning as neither kvm->slots_lock nor
kvm->srcu lock is held and kvm->users_count is above zero (>100 in fact).
This wraps mentioned VCPU read/write helpers in srcu read lock/unlock as
it is done in other places. This uses vcpu->srcu_idx when possible.
These helpers are only used for nested KVM so this may explain why
we did not see these before.
Here is an example of a warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897 Not tainted
-----------------------------
include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-system-ppc/2752:
#0: c000200359016be0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x144/0xd80 [kvm]
stack backtrace:
CPU: 80 PID: 2752 Comm: qemu-system-ppc Not tainted 5.7.0-rc3-le_dma-bypass.3.2_a+fstn1 #897
Call Trace:
[c0002003591ab240] [c000000000b23ab4] dump_stack+0x190/0x25c (unreliable)
[c0002003591ab2b0] [c00000000023f954] lockdep_rcu_suspicious+0x140/0x164
[c0002003591ab330] [c008000004a445f8] kvm_vcpu_gfn_to_memslot+0x4c0/0x510 [kvm]
[c0002003591ab3a0] [c008000004a44c18] kvm_vcpu_read_guest+0xa0/0x180 [kvm]
[c0002003591ab410] [c008000004ff9bd8] kvmhv_enter_nested_guest+0x90/0xb80 [kvm_hv]
[c0002003591ab980] [c008000004fe07bc] kvmppc_pseries_do_hcall+0x7b4/0x1c30 [kvm_hv]
[c0002003591aba10] [c008000004fe5d30] kvmppc_vcpu_run_hv+0x10a8/0x1a30 [kvm_hv]
[c0002003591abae0] [c008000004a5d954] kvmppc_vcpu_run+0x4c/0x70 [kvm]
[c0002003591abb10] [c008000004a56e54] kvm_arch_vcpu_ioctl_run+0x56c/0x7c0 [kvm]
[c0002003591abba0] [c008000004a3ddc4] kvm_vcpu_ioctl+0x4ac/0xd80 [kvm]
[c0002003591abd20] [c0000000006ebb58] ksys_ioctl+0x188/0x210
[c0002003591abd70] [c0000000006ebc28] sys_ioctl+0x48/0xb0
[c0002003591abdb0] [c000000000042764] system_call_exception+0x1d4/0x2e0
[c0002003591abe20] [c00000000000cce8] system_call_common+0xe8/0x214
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
POWER8 and POWER9 have 12-bit LPIDs. Change LPID_RSVD to support up to
(4096 - 2) guests on these processors. POWER7 is kept the same with a
limitation of (1024 - 2), but it might be time to drop KVM support for
POWER7.
Tested with 2048 guests * 4 vCPUs on a witherspoon system with 512G
RAM and a bit of swap.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Adds support for emulating ISAv3.1 guests by adding the appropriate PCR
and FSCR bits.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to use <asm/percpu.h> in lockdep.h, we need to make sure
asm/percpu.h does not itself depend on lockdep.
The below seems to make that so and builds powerpc64-defconfig +
PROVE_LOCKING.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
https://lkml.kernel.org/r/20200623083721.336906073@infradead.org
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
-----BEGIN PGP SIGNATURE-----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=1NIT
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
One fix for a recent change which broke nested KVM guests on Power9.
Thanks to:
Alexey Kardashevskiy.
-----BEGIN PGP SIGNATURE-----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=5zJH
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a recent change which broke nested KVM guests on Power9.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix nested guest RC bits update
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes
The guest side of the asynchronous page fault work has been delayed to 5.9
in order to sync with Thomas's interrupt entry rework.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
+uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
=+Hh0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"The guest side of the asynchronous page fault work has been delayed to
5.9 in order to sync with Thomas's interrupt entry rework, but here's
the rest of the KVM updates for this merge window.
MIPS:
- Loongson port
PPC:
- Fixes
ARM:
- Fixes
x86:
- KVM_SET_USER_MEMORY_REGION optimizations
- Fixes
- Selftest fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
KVM: selftests: fix sync_with_host() in smm_test
KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
KVM: async_pf: Cleanup kvm_setup_async_pf()
kvm: i8254: remove redundant assignment to pointer s
KVM: x86: respect singlestep when emulating instruction
KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
KVM: arm64: Remove host_cpu_context member from vcpu structure
KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
KVM: arm64: Handle PtrAuth traps early
KVM: x86: Unexport x86_fpu_cache and make it static
KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
KVM: arm64: Stop save/restoring ACTLR_EL1
KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
...
Before commit 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers
to walk shadow or secondary table") we called __find_linux_pte() with
a page table pointer from a kvm_nested_guest struct but
now we rely on kvmhv_find_nested() which takes an L1 LPID and returns
a kvm_nested_guest pointer, however we pass a L0 LPID there and
the L2 guest hangs.
This fixes the LPID passed to kvmppc_hv_handle_set_rc().
Fixes: 6cdf30375f ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611030559.75257-1-aik@ozlabs.ru
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
API __get_user_pages_fast() renamed to get_user_pages_fast_only() to
align with pin_user_pages_fast_only().
As part of this we will get rid of write parameter. Instead caller will
pass FOLL_WRITE to get_user_pages_fast_only(). This will not change any
existing functionality of the API.
All the callers are changed to pass FOLL_WRITE.
Also introduce get_user_page_fast_only(), and use it in a few places
that hard-code nr_pages to 1.
Updated the documentation of the API.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org> [arch/powerpc/kvm]
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michal Suchanek <msuchanek@suse.de>
Link: http://lkml.kernel.org/r/1590396812-31277-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7aYZ8THG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgPiKD/9zNCuZLFMAFrIdbm0HlYA2RGYZFT75
GUHsqYyei1pxA7PgM3KwJiXELVODsBv0eQbgNh1tbecKrxPRegN/cywd1KLjPZ7I
v5/qweQP8MvR0RhzjbhvUcO0jq/f8u2LbJr5mUfVzjU6tAvrvcWo3oZqDElsekCS
kgyOH3r1vZ2PLTMiGFhb0gWi2iqc+6BHU1AFCGPCMjB1Vu5d5+54VvZ/6lllGsOF
yg9CBXmmVvQ+Bn6tH4zdEB78FYxnAIwBqlbmL79i5ca+HQJ0Sw6HuPRy9XYq35p6
2EiXS4Wrgp7i7+1TN3HO362u5Onb8TSyQU7NS6yCFPoJ6JQxcJMBIw6mHhnXOPuZ
CrjgcdwUMjx8uDoKmX1Epbfuex2w+AysW+4yBHPFiSgl3klKC3D0wi95mR485w2F
rN8uzJtrDeFKcYZJG7IoB/cgFCCPKGf9HaXr8q0S/jBKMffx91ul3cfzlfdIXOCw
FDNw/+ZX7UD6ddFEG12ZTO+vdL8yf1uCRT/DIZwUiDMIA0+M6F4nc7j3lfyZfoO1
65f9UlhoLxScq7VH2fKH4UtZatO9cPID2z1CmiY4UbUIPtFDepSuYClgLF+Duf4b
rkfxhKU0+Ja1zNH5XNc+L+Bc5/W4lFiJXz02dYIjtHoUpWkc1aToOETVwzggYFNM
G3PXIBOI0jRgRw==
=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Merge one more commit from the topic branch we shared with the kvm-ppc
tree.
This brings in a fix to the code that scans for dirty pages during
migration of a VM, which was incorrectly triggering a warning.
Newer ISA versions are enabled by clearing all bits in the PCR
associated with previous versions of the ISA. Enable ISA v3.1 support
by updating the PCR mask to include ISA v3.0. This ensures all PCR
bits corresponding to earlier architecture versions get cleared
thereby enabling ISA v3.1 if supported by the hardware.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200521014341.29095-3-alistair@popple.id.au
There is a potential race condition between hypervisor page faults
and flushing a memslot. It is possible for a page fault to read the
memslot before a memslot is updated and then write a PTE to the
partition-scoped page tables after kvmppc_radix_flush_memslot has
completed. (Note that this race has never been explicitly observed.)
To close this race, it is sufficient to increment the MMU sequence
number while the kvm->mmu_lock is held. That will cause
mmu_notifier_retry() to return true, and the page fault will then
return to the guest without inserting a PTE.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Although in general we do not expect valid PTEs to be found in
kvmppc_create_pte when we are inserting a large page mapping, there
is one situation where this can occur. That is when dirty page
logging is turned off for a memslot while the VM is running.
Because the new memslots are installed before the old memslot is
flushed in kvmppc_core_commit_memory_region_hv(), there is a
window where a hypervisor page fault can try to install a 2MB
(or 1GB) page where there are already small page mappings which
were installed while dirty page logging was enabled and which
have not yet been flushed.
Since we have a situation where valid PTEs can legitimately be
found by kvmppc_unmap_free_pte, and which can be triggered by
userspace, just remove the WARN_ON_ONCE, since it is undesirable
to have userspace able to trigger a kernel warning.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The commit 8c47b6ff29 ("KVM: PPC: Book3S HV: Check caller of H_SVM_*
Hcalls") added checks of secure bit of SRR1 to filter out the Hcall
reserved to the Ultravisor.
However, the Hcall H_SVM_INIT_ABORT is made by the Ultravisor passing the
context of the VM calling UV_ESM. This allows the Hypervisor to return to
the guest without going through the Ultravisor. Thus the Secure bit of SRR1
is not set in that particular case.
In the case a regular VM is calling H_SVM_INIT_ABORT, this hcall will be
filtered out in kvmppc_h_svm_init_abort() because kvm->arch.secure_guest is
not set in that case.
Fixes: 8c47b6ff29 ("KVM: PPC: Book3S HV: Check caller of H_SVM_* Hcalls")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
It is unsafe to traverse kvm->arch.spapr_tce_tables and
stt->iommu_tables without the RCU read lock held. Also, add
cond_resched_rcu() in places with the RCU read lock held that could take
a while to finish.
arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by qemu-kvm/4265.
stack backtrace:
CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2
Call Trace:
[c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable)
[c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
[c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
[c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
[c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
[c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
[c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
[c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330
[c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130
[c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0
[c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0
[c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200
[c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0
[c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280
[c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278
====
arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4264:
#0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu'
structure. For historical reasons, many kvm-related function parameters
retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This
patch does a unified cleanup of these remaining redundant parameters.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The 'kvm_run' field already exists in the 'vcpu' structure, which
is the same structure as the 'kvm_run' in the 'vcpu_arch' and
should be deleted.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The newly introduced ibm,secure-memory nodes supersede the
ibm,uv-firmware's property secure-memory-ranges.
Firmware will no more expose the secure-memory-ranges property so first
read the new one and if not found rollback to the older one.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Free function kfree() already does NULL check, so the additional
check is unnecessary, just remove it.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Merge our topic branch shared with the kvm-ppc tree.
This brings in one commit that touches the XIVE interrupt controller
logic across core and KVM code.
Power10 is introducing second DAWR. Use real register names from ISA
for current macros:
s/SPRN_DAWR/SPRN_DAWR0/
s/SPRN_DAWRX/SPRN_DAWRX0/
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
Add the BOUNDARY SRR1 bit definition for when the cause of an
alignment exception is a prefixed instruction that crosses a 64-byte
boundary. Add the PREFIXED SRR1 bit definition for exceptions caused
by prefixed instructions.
Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it
being used to indicate that an ISI was due to the access being no-exec
or guarded. ISA v3.1 adds another purpose. It is also set if there is
an access in a cache-inhibited location for prefixed instruction.
Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-23-jniethe5@gmail.com
In preparation for instructions having a more complex data type start
using a macro, ppc_inst(), for making an instruction out of a u32. A
macro is used so that instructions can be used as initializer elements.
Currently this does nothing, but it will allow for creating a data type
that can represent prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Change include guard to _ASM_POWERPC_INST_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com
Two new stats for exposing halt-polling cpu usage:
halt_poll_success_ns
halt_poll_fail_ns
Thus sum of these 2 stats is the total cpu time spent polling. "success"
means the VCPU polled until a virtual interrupt was delivered. "fail"
means the VCPU had to schedule out (either because the maximum poll time
was reached or it needed to yield the CPU).
To avoid touching every arch's kvm_vcpu_stat struct, only update and
export halt-polling cpu usage stats if we're on x86.
Exporting cpu usage as a u64 and in nanoseconds means we will overflow at
~500 years, which seems reasonably large.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200508182240.68440-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of any sort of waitqueue (simple or regular) for
wait/waking vcpus has always been an overkill and semantically
wrong. Because this is per-vcpu (which is blocked) there is
only ever a single waiting vcpu, thus no need for any sort of
queue.
As such, make use of the rcuwait primitive, with the following
considerations:
- rcuwait already provides the proper barriers that serialize
concurrent waiter and waker.
- Task wakeup is done in rcu read critical region, with a
stable task pointer.
- Because there is no concurrency among waiters, we need
not worry about rcuwait_wait_event() calls corrupting
the wait->task. As a consequence, this saves the locking
done in swait when modifying the queue. This also applies
to per-vcore wait for powerpc kvm-hv.
The x86 tscdeadline_latency test mentioned in 8577370fb0
("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg,
latency is reduced by around 15-20% with this change.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-mips@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <20200424054837.5138-6-dave@stgolabs.net>
[Avoid extra logic changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an interrupt has been handled, the OS notifies the interrupt
controller with a EOI sequence. On a POWER9 system using the XIVE
interrupt controller, this can be done with a load or a store
operation on the ESB interrupt management page of the interrupt. The
StoreEOI operation has less latency and improves interrupt handling
performance but it was deactivated during the POWER9 DD2.0 timeframe
because of ordering issues. We use the LoadEOI today but we plan to
reactivate StoreEOI in future architectures.
There is usually no need to enforce ordering between ESB load and
store operations as they should lead to the same result. E.g. a store
trigger and a load EOI can be executed in any order. Assuming the
interrupt state is PQ=10, a store trigger followed by a load EOI will
return a Q bit. In the reverse order, it will create a new interrupt
trigger from HW. In both cases, the handler processing interrupts is
notified.
In some cases, the XIVE_ESB_SET_PQ_10 load operation is used to
disable temporarily the interrupt source (mask/unmask). When the
source is reenabled, the OS can detect if interrupts were received
while the source was disabled and reinject them. This process needs
special care when StoreEOI is activated. The ESB load and store
operations should be correctly ordered because a XIVE_ESB_STORE_EOI
operation could leave the source enabled if it has not completed
before the loads.
For those cases, we enforce Load-after-Store ordering with a special
load operation offset. To avoid performance impact, this ordering is
only enforced when really needed, that is when interrupt sources are
temporarily disabled with the XIVE_ESB_SET_PQ_10 load. It should not
be needed for other loads.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220081506.31209-1-clg@kaod.org
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported. My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.
The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current code just hold rmap lock to ensure parallel page table update is
prevented. That is not sufficient. The kernel should also check whether
a mmu_notifer callback was running in parallel.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-16-aneesh.kumar@linux.ibm.com
Since kvmppc_do_h_enter can get called in realmode use low level
arch_spin_lock which is safe to be called in realmode.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-15-aneesh.kumar@linux.ibm.com
The locking rules for walking nested shadow linux page table is different from process
scoped table. Hence add a helper for nested page table walk and also
add check whether we are holding the right locks.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-11-aneesh.kumar@linux.ibm.com
The locking rules for walking partition scoped table is different from process
scoped table. Hence add a helper for secondary linux page table walk and also
add check whether we are holding the right locks.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-10-aneesh.kumar@linux.ibm.com
These functions can get called in realmode. Hence use low level
arch_spin_lock which is safe to be called in realmode.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200505071729.54912-9-aneesh.kumar@linux.ibm.com
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJeni/pAAoJEJ2a6ncsY3GfTRoIANAQjIZi96AfJcfnrYQ4yUF7
scxawTiJ9VavvsEJLJ7vsozrJ4xxmvmA0fFWC84uw9+BwPqoLFFvZTjazbGEDVvF
FGwNBR/k7nfFVMIHS3K9iy9KjvYL3xkL26AgFTDJFq8hmOO9pH0txuk4r7SXb+NX
bGG0mScAD/Dg/HwAHAS6EP3jT35QtGTK62p8foqVTziTNcmBn9Ywtg0lEzAcq2iY
Y1BUD4Ov3cggshMI9SqHE8Yyq0XA2Wi6ggcyz/gVzvcbdFQmtg57Tri8nN8661LX
XKh+VTpYSIxNs5GgjwlNesJzJ9h6CSynJF556qrjQ0XsXcNqvn8fcZdNQ+hnRYw=
=Y19W
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.7-1' into topic/ppc-kvm
This brings in a fix from the kvm-ppc tree that was merged to mainline
after rc2, and so isn't in the base of our topic branch. We'd like it
in the topic branch because it interacts with patches we plan to carry
in this branch.
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJeni/pAAoJEJ2a6ncsY3GfTRoIANAQjIZi96AfJcfnrYQ4yUF7
scxawTiJ9VavvsEJLJ7vsozrJ4xxmvmA0fFWC84uw9+BwPqoLFFvZTjazbGEDVvF
FGwNBR/k7nfFVMIHS3K9iy9KjvYL3xkL26AgFTDJFq8hmOO9pH0txuk4r7SXb+NX
bGG0mScAD/Dg/HwAHAS6EP3jT35QtGTK62p8foqVTziTNcmBn9Ywtg0lEzAcq2iY
Y1BUD4Ov3cggshMI9SqHE8Yyq0XA2Wi6ggcyz/gVzvcbdFQmtg57Tri8nN8661LX
XKh+VTpYSIxNs5GgjwlNesJzJ9h6CSynJF556qrjQ0XsXcNqvn8fcZdNQ+hnRYw=
=Y19W
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix for 5.7
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
In earlier versions of kvm, 'kvm_run' was an independent structure
and was not included in the vcpu structure. At present, 'kvm_run'
is already included in the vcpu structure, so the parameter
'kvm_run' is redundant.
This patch simplifies the function definition, removes the extra
'kvm_run' parameter, and extracts it from the 'kvm_vcpu' structure
if necessary.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Message-Id: <20200416051057.26526-1-tianjia.zhang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The macros VM_STAT and VCPU_STAT are redundantly implemented in multiple
files, each used by a different architecure to initialize the debugfs
entries for statistics. Since they all have the same purpose, they can be
unified in a single common definition in include/linux/kvm_host.h
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20200414155625.20559-1-eesposit@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since cd758a9b57 "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT
page fault handler", it's been possible in fairly rare circumstances to
load a non-present PTE in kvmppc_book3s_hv_page_fault() when running a
guest on a POWER8 host.
Because that case wasn't checked for, we could misinterpret the non-present
PTE as being a cache-inhibited PTE. That could mismatch with the
corresponding hash PTE, which would cause the function to fail with -EFAULT
a little further down. That would propagate up to the KVM_RUN ioctl()
generally causing the KVM userspace (usually qemu) to fall over.
This addresses the problem by catching that case and returning to the guest
instead.
For completeness, this fixes the radix page fault handler in the same
way. For radix this didn't cause any obvious misbehaviour, because we
ended up putting the non-present PTE into the guest's partition-scoped
page tables, leading immediately to another hypervisor data/instruction
storage interrupt, which would go through the page fault path again
and fix things up.
Fixes: cd758a9b57 "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler"
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1820402
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
This series focuses on corner case bug fixes and general clarity
improvements to hmm_range_fault().
- 9 bug fixes
- Allow pgmap to track the 'owner' of a DEVICE_PRIVATE - in this case the
owner tells the driver if it can understand the DEVICE_PRIVATE page or
not. Use this to resolve a bug in nouveau where it could touch
DEVICE_PRIVATE pages from other drivers.
- Remove a bunch of dead, redundant or unused code and flags
- Clarity improvements to hmm_range_fault()
-----BEGIN PGP SIGNATURE-----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=UEpV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This series focuses on corner case bug fixes and general clarity
improvements to hmm_range_fault(). It arose from a review of
hmm_range_fault() by Christoph, Ralph and myself.
hmm_range_fault() is being used by these 'SVM' style drivers to
non-destructively read the page tables. It is very similar to
get_user_pages() except that the output is an array of PFNs and
per-pfn flags, and it has various modes of reading.
This is necessary before RDMA ODP can be converted, as we don't want
to have weird corner case regressions, which is still a looking
forward item. Ralph has a nice tester for this routine, but it is
waiting for feedback from the selftests maintainers.
Summary:
- 9 bug fixes
- Allow pgmap to track the 'owner' of a DEVICE_PRIVATE - in this case
the owner tells the driver if it can understand the DEVICE_PRIVATE
page or not. Use this to resolve a bug in nouveau where it could
touch DEVICE_PRIVATE pages from other drivers.
- Remove a bunch of dead, redundant or unused code and flags
- Clarity improvements to hmm_range_fault()"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
mm/hmm: return error for non-vma snapshots
mm/hmm: do not set pfns when returning an error code
mm/hmm: do not unconditionally set pfns when returning EBUSY
mm/hmm: use device_private_entry_to_pfn()
mm/hmm: remove HMM_FAULT_SNAPSHOT
mm/hmm: remove unused code and tidy comments
mm/hmm: return the fault type from hmm_pte_need_fault()
mm/hmm: remove pgmap checking for devmap pages
mm/hmm: check the device private page owner in hmm_range_fault()
mm: simplify device private page handling in hmm_range_fault
mm: handle multiple owners of device private pages in migrate_vma
memremap: add an owner field to struct dev_pagemap
mm: merge hmm_vma_do_fault into into hmm_vma_walk_hole_
mm/hmm: don't handle the non-fault case in hmm_vma_walk_hole_()
mm/hmm: simplify hmm_vma_walk_hugetlb_entry()
mm/hmm: remove the unused HMM_FAULT_ALLOW_RETRY flag
mm/hmm: don't provide a stub for hmm_range_fault()
mm/hmm: do not check pmd_protnone twice in hmm_vma_handle_pmd()
mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handling
mm/hmm: return -EFAULT when setting HMM_PFN_ERROR on requested valid pages
...
Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol. Such dependency may prevent archs without
virtualization support from using vhost.
To solve this, a dedicated vhost menu is created under drivers so
CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION.
While at it, also squash Kconfig.vringh into vhost Kconfig file. This
avoids the trick of conditional inclusion from VOP or CAIF. Then it
will be easier to introduce new vringh users and common dependency for
both vringh and vhost.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows more code to be moved out of unrelocated regions. The
system call KVMTEST is changed to be open-coded and remain in the
tramp area to avoid having to move it to entry_64.S. The custom nature
of the system call entry code means the hcall case can be made more
streamlined than regular interrupt handlers.
mpe: Incorporate fix from Nick:
Moving KVM test to the common entry code missed the case of HMI and
MCE, which do not do __GEN_COMMON_ENTRY (because they don't want to
switch to virt mode).
This means a MCE or HMI exception that is taken while KVM is running a
guest context will not be switched out of that context, and KVM won't
be notified. Found by running sigfuz in guest with patched host on
POWER9 DD2.3, which causes some TM related HMI interrupts (which are
expected and supposed to be handled by KVM).
This fix adds a __GEN_REALMODE_COMMON_ENTRY for those handlers to add
the KVM test. This makes them look a little more like other handlers
that all use __GEN_COMMON_ENTRY.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-13-npiggin@gmail.com
Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new src_owner field to struct migrate_vma. If the field is set,
only device private pages with page->pgmap->owner equal to that field are
migrated. If the field is not set only "normal" pages are migrated.
Fixes: df6ad69838 ("mm/device-public-memory: device memory cache coherent with CPU")
Link: https://lore.kernel.org/r/20200316193216.920734-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new opaque owner field to struct dev_pagemap, which will allow the
hmm and migrate_vma code to identify who owns ZONE_DEVICE memory, and
refuse to work on mappings not owned by the calling entity.
Link: https://lore.kernel.org/r/20200316193216.920734-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will. Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests. This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.
This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest. If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest. The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
When the call to UV_REGISTER_MEM_SLOT is failing, for instance because
there is not enough free secured memory, the Hypervisor (HV) has to call
UV_RETURN to report the error to the Ultravisor (UV). Then the UV will call
H_SVM_INIT_ABORT to abort the securing phase and go back to the calling VM.
If the kvm->arch.secure_guest is not set, in the return path rfid is called
but there is no valid context to get back to the SVM since the Hcall has
been routed by the Ultravisor.
Move the setting of kvm->arch.secure_guest earlier in
kvmppc_h_svm_init_start() so in the return path, UV_RETURN will be called
instead of rfid.
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The Hcall named H_SVM_* are reserved to the Ultravisor. However, nothing
prevent a malicious VM or SVM to call them. This could lead to weird result
and should be filtered out.
Checking the Secure bit of the calling MSR ensure that the call is coming
from either the Ultravisor or a SVM. But any system call made from a SVM
are going through the Ultravisor, and the Ultravisor should filter out
these malicious call. This way, only the Ultravisor is able to make such a
Hcall.
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibnm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
With PR KVM, shutting down a VM causes the host kernel to crash:
[ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638
[ 314.219299] Faulting instruction address: 0xc008000000d4ddb0
cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0]
pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr]
lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr]
sp: c00000036da07a30
msr: 900000010280b033
dar: c00800000176c638
dsisr: 40000000
current = 0xc00000036d4c0000
paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01
pid = 1992, comm = qemu-system-ppc
Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020
enter ? for help
[c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr]
[c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm]
[c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm]
[c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm]
[c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm]
[c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm]
[c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm]
[c00000036da07c30] c000000000420be0 __fput+0xe0/0x310
[c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0
[c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00
[c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0
[c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30
[c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68
This is caused by a use-after-free in kvmppc_mmu_pte_flush_all()
which dereferences vcpu->arch.book3s which was previously freed by
kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy()
is called after kvmppc_core_vcpu_free() since commit ff030fdf55
("KVM: PPC: Move kvm_vcpu_init() invocation to common code").
The kvmppc_mmu_destroy() helper calls one of the following depending
on the KVM backend:
- kvmppc_mmu_destroy_hv() which does nothing (Book3s HV)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 32-bit)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 64-bit)
- kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc)
It turns out that this is only relevant to PR KVM actually. And both
32 and 64 backends need vcpu->arch.book3s to be valid when calling
kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy()
from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the
beginning of kvmppc_core_vcpu_free_pr(). This is consistent with
kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr().
For the same reason, if kvmppc_core_vcpu_create_pr() returns an
error then this means that kvmppc_mmu_init() was either not called
or failed, in which case kvmppc_mmu_destroy() should not be called.
Drop the line in the error path of kvm_arch_vcpu_create().
Fixes: ff030fdf55 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan
These are only used by HV KVM and BookE, and in both cases they are
nops.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This is only relevant to PR KVM. Make it obvious by moving the
function declaration to the Book3s header and rename it with
a _pr suffix.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
With PR KVM, shutting down a VM causes the host kernel to crash:
[ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638
[ 314.219299] Faulting instruction address: 0xc008000000d4ddb0
cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0]
pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr]
lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr]
sp: c00000036da07a30
msr: 900000010280b033
dar: c00800000176c638
dsisr: 40000000
current = 0xc00000036d4c0000
paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01
pid = 1992, comm = qemu-system-ppc
Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020
enter ? for help
[c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr]
[c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm]
[c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm]
[c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm]
[c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm]
[c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm]
[c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm]
[c00000036da07c30] c000000000420be0 __fput+0xe0/0x310
[c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0
[c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00
[c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0
[c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30
[c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68
This is caused by a use-after-free in kvmppc_mmu_pte_flush_all()
which dereferences vcpu->arch.book3s which was previously freed by
kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy()
is called after kvmppc_core_vcpu_free() since commit ff030fdf55
("KVM: PPC: Move kvm_vcpu_init() invocation to common code").
The kvmppc_mmu_destroy() helper calls one of the following depending
on the KVM backend:
- kvmppc_mmu_destroy_hv() which does nothing (Book3s HV)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 32-bit)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 64-bit)
- kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc)
It turns out that this is only relevant to PR KVM actually. And both
32 and 64 backends need vcpu->arch.book3s to be valid when calling
kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy()
from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the
beginning of kvmppc_core_vcpu_free_pr(). This is consistent with
kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr().
For the same reason, if kvmppc_core_vcpu_create_pr() returns an
error then this means that kvmppc_mmu_init() was either not called
or failed, in which case kvmppc_mmu_destroy() should not be called.
Drop the line in the error path of kvm_arch_vcpu_create().
Fixes: ff030fdf55 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The h_cede_tm kvm-unit-test currently fails when run inside an L1 guest
via the guest/nested hypervisor.
./run-tests.sh -v
...
TESTNAME=h_cede_tm TIMEOUT=90s ACCEL= ./powerpc/run powerpc/tm.elf -smp 2,threads=2 -machine cap-htm=on -append "h_cede_tm"
FAIL h_cede_tm (2 tests, 1 unexpected failures)
While the test relates to transactional memory instructions, the actual
failure is due to the return code of the H_CEDE hypercall, which is
reported as 224 instead of 0. This happens even when no TM instructions
are issued.
224 is the value placed in r3 to execute a hypercall for H_CEDE, and r3
is where the caller expects the return code to be placed upon return.
In the case of guest running under a nested hypervisor, issuing H_CEDE
causes a return from H_ENTER_NESTED. In this case H_CEDE is
specially-handled immediately rather than later in
kvmppc_pseries_do_hcall() as with most other hcalls, but we forget to
set the return code for the caller, hence why kvm-unit-test sees the
224 return code and reports an error.
Guest kernels generally don't check the return value of H_CEDE, so
that likely explains why this hasn't caused issues outside of
kvm-unit-tests so far.
Fix this by setting r3 to 0 after we finish processing the H_CEDE.
RHBZ: 1778556
Fixes: 4bad77799f ("KVM: PPC: Book3S HV: Handle hypercalls correctly when nested")
Cc: linuxppc-dev@ozlabs.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
[345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
[345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
In kvmppc_unmap_free_pte() in book3s_64_mmu_radix.c, we use the
non-constant value PTE_INDEX_SIZE to clear a PTE page.
We can instead use the constant RADIX_PTE_INDEX_SIZE, because we know
this code will only be running when the Radix MMU is active.
Note that we already use RADIX_PTE_INDEX_SIZE for the allocation of
kvm_pte_cache.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This makes the same changes in the page fault handler for HPT guests
that commits 31c8b0d069 ("KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot()
in page fault handler", 2018-03-01), 71d29f43b6 ("KVM: PPC: Book3S HV:
Don't use compound_order to determine host mapping size", 2018-09-11)
and 6579804c43 ("KVM: PPC: Book3S HV: Avoid crash from THP collapse
during radix page fault", 2018-10-04) made for the page fault handler
for radix guests.
In summary, where we used to call get_user_pages_fast() and then do
special handling for VM_PFNMAP vmas, we now call __get_user_pages_fast()
and then __gfn_to_pfn_memslot() if that fails, followed by reading the
Linux PTE to get the host PFN, host page size and mapping attributes.
This also brings in the change from SetPageDirty() to set_page_dirty_lock()
which was done for the radix page fault handler in commit c3856aeb29
("KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault
handler", 2018-02-23).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers. linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor memslot handling to treat the number of used slots as the de
facto size of the memslot array, e.g. return NULL from id_to_memslot()
when an invalid index is provided instead of relying on npages==0 to
detect an invalid memslot. Rework the sorting and walking of memslots
in advance of dynamically sizing memslots to aid bisection and debug,
e.g. with luck, a bug in the refactoring will bisect here and/or hit a
WARN instead of randomly corrupting memory.
Alternatively, a global null/invalid memslot could be returned, i.e. so
callers of id_to_memslot() don't have to explicitly check for a NULL
memslot, but that approach runs the risk of introducing difficult-to-
debug issues, e.g. if the global null slot is modified. Constifying
the return from id_to_memslot() to combat such issues is possible, but
would require a massive refactoring of arch specific code and would
still be susceptible to casting shenanigans.
Add function comments to update_memslots() and search_memslots() to
explicitly (and loudly) state how memslots are sorted.
Opportunistically stuff @hva with a non-canonical value when deleting a
private memslot on x86 to detect bogus usage of the freed slot.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework kvm_get_dirty_log() so that it "returns" the associated memslot
on success. A future patch will rework memslot handling such that
id_to_memslot() can return NULL, returning the memslot makes it more
obvious that the validity of the memslot has been verified, i.e.
precludes the need to add validity checks in the arch code that are
technically unnecessary.
To maintain ordering in s390, move the call to kvm_arch_sync_dirty_log()
from s390's kvm_vm_ioctl_get_dirty_log() to the new kvm_get_dirty_log().
This is a nop for PPC, the only other arch that doesn't select
KVM_GENERIC_DIRTYLOG_READ_PROTECT, as its sync_dirty_log() is empty.
Ideally, moving the sync_dirty_log() call would be done in a separate
patch, but it can't be done in a follow-on patch because that would
temporarily break s390's ordering. Making the move in a preparatory
patch would be functionally correct, but would create an odd scenario
where the moved sync_dirty_log() would operate on a "different" memslot
due to consuming the result of a different id_to_memslot(). The
memslot couldn't actually be different as slots_lock is held, but the
code is confusing enough as it is, i.e. moving sync_dirty_log() in this
patch is the lesser of all evils.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the implementations of KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG
for CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT into common KVM code.
The arch specific implemenations are extremely similar, differing
only in whether the dirty log needs to be sync'd from hardware (x86)
and how the TLBs are flushed. Add new arch hooks to handle sync
and TLB flush; the sync will also be used for non-generic dirty log
support in a future patch (s390).
The ulterior motive for providing a common implementation is to
eliminate the dependency between arch and common code with respect to
the memslot referenced by the dirty log, i.e. to make it obvious in the
code that the validity of the memslot is guaranteed, as a future patch
will rework memslot handling such that id_to_memslot() can return NULL.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers of kvm_free_memslot() pass NULL for @dont, remove
the param from the top-level routine and all arch's implementations.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "const" attribute from @old in kvm_arch_commit_memory_region()
to allow arch specific code to free arch specific resources in the old
memslot without having to cast away the attribute. Freeing resources in
kvm_arch_commit_memory_region() paves the way for simplifying
kvm_free_memslot() by eliminating the last usage of its @dont param.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_create_memslot() now that all arch implementations are
effectively nops. Removing kvm_arch_create_memslot() eliminates the
possibility for arch specific code to allocate memory prior to setting
a memslot, which sets the stage for simplifying kvm_free_memslot().
Cc: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the rmap array during kvm_arch_prepare_memory_region() to pave
the way for removing kvm_arch_create_memslot() altogether. Moving PPC's
memory allocation only changes the order of kernel memory allocations
between PPC and common KVM code.
No functional change intended.
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because of this cleanup, we get to remove a few fields in struct
kvm_arch that are now unused.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Fix build error in kvm/timing.c, adapt kvmppc_remove_cpu_debugfs()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-2-gregkh@linuxfoundation.org
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
* Fix compile warning on 32-bit machines
* Fix locking error in secure VM support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJeMiC8AAoJEJ2a6ncsY3GfGg8H/03p+jc/aCKcA75ZeQPlzhmu
KWvSBbPATNcQiYOLfIvbB9AMXUPoyIfiblW/On8G6COFypsIhhUTwEfPUjWIBHNX
IwCfzoyf0gDRTi7A7gTDD06ZE+stikxJu59agX2Gc8kTIQ8ge340VR8J95Ol8/n2
/hVA8S/ORrdv8/KaCcvvIwc1V7OV6xBuGsTUOUvywzBTGDKd0CAbNzRwtS8LmWcM
OCkZX4G5DpFIYdsnjSBaSfwEVPAf3G1DzyQ801emwRnbAGYYgfakd1LwqdLDxptt
6CFHuIENEmmweJKMf9FBLWg+fOMl8wsv9l4mBIYt7coq5XPpi07yJ6yqSaJEToQ=
=Hmfo
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Second KVM PPC update for 5.6
* Fix compile warning on 32-bit machines
* Fix locking error in secure VM support
Fixes: 3a167beac0 ("kvm: powerpc: Add kvmppc_ops callback")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When migrate_vma_setup() fails in kvmppc_svm_page_out(),
release kvm->arch.uvmem_lock before returning.
Fixes: ca9f494267 ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the
correct set of memslots is used when handling x86 page faults in SMM.
Fixes: 54bf36aac5 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). Rinse and repeat for kvm_arch_vcpu_uninit()
and kvm_arch_vcpu_destroy(). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, calling kvmppc_mmu_destroy() if kvmppc_core_vcpu_create() fails
may or may not be necessary. Move it along with the more obvious call
to kvmppc_subarch_vcpu_uninit() so as not to inadvertantly introduce a
functional change and/or bug.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold setup() into create() now that the two are called back-to-back by
common KVM code. This paves the way for removing kvm_arch_vcpu_setup().
Note, BookE directly implements kvm_arch_vcpu_setup() and PPC's common
kvm_arch_vcpu_create() is responsible for its own cleanup, thus the only
cleanup required when directly invoking kvmppc_core_vcpu_setup() is to
call .vcpu_free(), which is the BookE specific portion of PPC's
kvm_arch_vcpu_destroy() by way of kvmppc_core_vcpu_free().
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a25bd72bad ("powerpc/mm/radix: Workaround prefetch issue with
KVM") introduced a number of workarounds as coming out of a guest with
the mmu enabled would make the cpu would start running in hypervisor
state with the PID value from the guest. The cpu will then start
prefetching for the hypervisor with that PID value.
In Power9 DD2.2 the cpu behaviour was modified to fix this. When
accessing Quadrant 0 in hypervisor mode with LPID != 0 prefetching will
not be performed. This means that we can get rid of the workarounds for
Power9 DD2.2 and later revisions. Add a new cpu feature
CPU_FTR_P9_RADIX_PREFETCH_BUG to indicate if the workarounds are needed.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191206031722.25781-1-jniethe5@gmail.com
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_cpu_{un}init() calls to common PPC code as an intermediate
step towards removing kvm_cpu_{un}init() altogether.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the initialization of oldpir so that the call to kvm_vcpu_init() is
at the top of kvmppc_core_vcpu_create_e500mc(). oldpir is only use
when loading/putting a vCPU, which currently cannot be done until after
kvm_arch_vcpu_create() completes. Reording the call to kvm_vcpu_init()
paves the way for moving the invocation to common PPC code.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_vcpu_init() in kvmppc_core_vcpu_create_pr() prior to allocating
the book3s and shadow_vcpu objects in preparation of moving said call to
common PPC code. Although kvm_vcpu_init() has an arch callback, the
callback is empty for Book3S PR, i.e. barring unseen black magic, moving
the allocation has no real functional impact.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move allocation of all flavors of PPC vCPUs to common PPC code. All
variants either allocate 'struct kvm_vcpu' directly, or require that
the embedded 'struct kvm_vcpu' member be located at offset 0, i.e.
guarantee that the allocation can be directly interpreted as a 'struct
kvm_vcpu' object.
Remove the message from the build-time assertion regarding placement of
the struct, as compatibility with the arch usercopy region is no longer
the sole dependent on 'struct kvm_vcpu' being at offset zero.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for moving vcpu allocation to common PPC code, add an
explicit, albeit redundant, build-time assert to ensure the vcpu member
is located at offset 0. The assert is redundant in the sense that
kvmppc_core_vcpu_create_e500() contains a functionally identical assert.
The motiviation for adding the extra assert is to provide visual
confirmation of the correctness of moving vcpu allocation to common
code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().
Fixes: 96bc451a15 ("KVM: PPC: Introduce shared page")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call kvm_vcpu_uninit() if vcore creation fails to avoid leaking any
resources allocated by kvm_vcpu_init(), i.e. the vcpu->run page.
Fixes: 371fefd6f2 ("KVM: PPC: Allow book3s_hv guests to use SMT processor modes")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the H_SVM_INIT_ABORT hcall which the Ultravisor can use to
abort an SVM after it has issued the H_SVM_INIT_START and before the
H_SVM_INIT_DONE hcalls. This hcall could be used when Ultravisor
encounters security violations or other errors when starting an SVM.
Note that this hcall is different from UV_SVM_TERMINATE ucall which
is used by HV to terminate/cleanup an VM that has becore secure.
The H_SVM_INIT_ABORT basically undoes operations that were done
since the H_SVM_INIT_START hcall - i.e page-out all the VM pages back
to normal memory, and terminate the SVM.
(If we do not bring the pages back to normal memory, the text/data
of the VM would be stuck in secure memory and since the SVM did not
go secure, its MSR_S bit will be clear and the VM wont be able to
access its pages even to do a clean exit).
Based on patches and discussion with Paul Mackerras, Ram Pai and
Bharata Rao.
Signed-off-by: Ram Pai <linuxram@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add 'skip_page_out' parameter to kvmppc_uvmem_drop_pages() so the
callers can specify whetheter or not to skip paging out pages. This
will be needed in a follow-on patch that implements H_SVM_INIT_ABORT
hcall.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Given that in kvm_create_vm() there is:
kvm->mm = current->mm;
And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
return -EIO;
I see no reason to keep using current->mm instead of kvm->mm.
By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Given that in kvm_create_vm() there is:
kvm->mm = current->mm;
And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
return -EIO;
I see no reason to keep using current->mm instead of kvm->mm.
By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Fixes gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:6: warning: variable ra set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:10: warning: variable rs set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:14: warning: variable rt set but not used [-Wunused-but-set-variable]
They are not used since commit 2b33cb585f ("KVM: PPC: Reimplement
LOAD_FP/STORE_FP instruction mmio emulation with analyse_instr() input")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
* Fix a bug where we try to do an ultracall on a system without an ultravisor.
KVM:
- Fix uninitialised sysreg accessor
- Fix handling of demand-paged device mappings
- Stop spamming the console on IMPDEF sysregs
- Relax mappings of writable memslots
- Assorted cleanups
MIPS:
- Now orphan, James Hogan is stepping down
x86:
- MAINTAINERS change, so long Radim and thanks for all the fish
- supported CPUID fixes for AMD machines without SPEC_CTRL
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJd/1+WAAoJEL/70l94x66DFuYH/A8x/P6BuCpppdGoEw+VGy7X
E8141dHTd7b1Wgi0kDNLRREr4QIfArvavGe0z0W8p4fGtcVjXdyhhfPd0UK6dfKG
9P66phY4AGPjde/8q/qSdFup9yshpcFwSVYdRC0L1w86dBRlXwuqk6K5zsRyCU4b
38v5Q3rPdMnWWB0K88/GMvAyQmPkgMOXJvhoecKeDQ+9IZ3ub6DBBNGM/xTJ9Y3z
vUe2BoYkZ3KKn6sfP66PdprBVI1EOrrAoj/l4BSuo/yUPcQsxTihXMkh5iGl18TF
h7TN9eq2Bn2ryh0TsaSK8opuePcotVvx7oll3ERtSV4e+89z5FDt4vVcY1VyRuc=
=adm7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"PPC:
- Fix a bug where we try to do an ultracall on a system without an
ultravisor
KVM:
- Fix uninitialised sysreg accessor
- Fix handling of demand-paged device mappings
- Stop spamming the console on IMPDEF sysregs
- Relax mappings of writable memslots
- Assorted cleanups
MIPS:
- Now orphan, James Hogan is stepping down
x86:
- MAINTAINERS change, so long Radim and thanks for all the fish
- supported CPUID fixes for AMD machines without SPEC_CTRL"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MAINTAINERS: remove Radim from KVM maintainers
MAINTAINERS: Orphan KVM for MIPS
kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD
kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor
KVM: arm/arm64: Properly handle faulting of device mappings
KVM: arm64: Ensure 'params' is initialised when looking up sys register
KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region
KVM: arm64: Don't log IMP DEF sysreg traps
KVM: arm64: Sanely ratelimit sysreg messages
KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create()
KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy()
KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()
Commit 22945688ac ("KVM: PPC: Book3S HV: Support reset of secure
guest") added a call to uv_svm_terminate, which is an ultravisor
call, without any check that the guest is a secure guest or even that
the system has an ultravisor. On a system without an ultravisor,
the ultracall will degenerate to a hypercall, but since we are not
in KVM guest context, the hypercall will get treated as a system
call, which could have random effects depending on what happens to
be in r0, and could also corrupt the current task's kernel stack.
Hence this adds a test for the guest being a secure guest before
doing uv_svm_terminate().
Fixes: 22945688ac ("KVM: PPC: Book3S HV: Support reset of secure guest")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu.
arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct
pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field
of pt_regs as "unsigned long ccr". Since unsigned long is 64 bits, a
64-bit load needs to be used to load it, unless an endianness specific
correction offset is added to access the desired subpart. In this
case there is no reason to _not_ use a 64 bit load though.
Fixes: 6c85b7bc63 ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se
* small x86 cleanup
* fix for an x86-specific out-of-bounds write on a ioctl (not guest triggerable,
data not attacker-controlled)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJd551cAAoJEL/70l94x66D+JkH/R3eEOyvckPmYmzd0lnV8mQ/
7e0n2G/aD+iLZkcCbUnMaImdmSJmoEEJCPjgPk/5nJ3zUi5b/ABWyidEM5uf19Hl
rzKBg0DR7BiQptPnZv2JMwEVKu3JOTchMykqu9xXChQlICocZ0xjdOA6nQ19p0Lv
FulDw5MUaWrXevIzCBskQ38zJejRQA6CpD1lQkHn7LKS9p3p+BsAOd/Ouy87RfWG
b3ktECNbXyO6KStrrhgm+z8pviWY+kqYklyBlDOOwxWif0x8WvNDpQLoVo+ZuhLU
Me8YJ1BN75vFlxzh6ZK5exBUnm9E3fGVKIaaF+dpuds2x+j4HnYl+lZCm89MdqY=
=Q4v7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
- PPC secure guest support
- small x86 cleanup
- fix for an x86-specific out-of-bounds write on a ioctl (not guest
triggerable, data not attacker-controlled)
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Stop wasting a page for guest_msrs
KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)
Documentation: kvm: Fix mention to number of ioctls classes
powerpc: Ultravisor: Add PPC_UV config option
KVM: PPC: Book3S HV: Support reset of secure guest
KVM: PPC: Book3S HV: Handle memory plug/unplug to secure VM
KVM: PPC: Book3S HV: Radix changes for secure guest
KVM: PPC: Book3S HV: Shared pages support for secure guests
KVM: PPC: Book3S HV: Support for running secure guests
mm: ksm: Export ksm_madvise()
KVM x86: Move kvm cpuid support out of svm
Add support for reset of secure guest via a new ioctl KVM_PPC_SVM_OFF.
This ioctl will be issued by QEMU during reset and includes the
the following steps:
- Release all device pages of the secure guest.
- Ask UV to terminate the guest via UV_SVM_TERMINATE ucall
- Unpin the VPA pages so that they can be migrated back to secure
side when guest becomes secure again. This is required because
pinned pages can't be migrated.
- Reinit the partition scoped page tables
After these steps, guest is ready to issue UV_ESM call once again
to switch to secure mode.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[Implementation of uv_svm_terminate() and its call from
guest shutdown path]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[Unpinning of VPA pages]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Register the new memslot with UV during plug and unregister
the memslot during unplug. In addition, release all the
device pages during unplug.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
- After the guest becomes secure, when we handle a page fault of a page
belonging to SVM in HV, send that page to UV via UV_PAGE_IN.
- Whenever a page is unmapped on the HV side, inform UV via UV_PAGE_INVAL.
- Ensure all those routines that walk the secondary page tables of
the guest don't do so in case of secure VM. For secure guest, the
active secondary page tables are in secure memory and the secondary
page tables in HV are freed when guest becomes secure.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
A secure guest will share some of its pages with hypervisor (Eg. virtio
bounce buffers etc). Support sharing of pages between hypervisor and
ultravisor.
Shared page is reachable via both HV and UV side page tables. Once a
secure page is converted to shared page, the device page that represents
the secure page is unmapped from the HV side page tables.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
A pseries guest can be run as secure guest on Ultravisor-enabled
POWER platforms. On such platforms, this driver will be used to manage
the movement of guest pages between the normal memory managed by
hypervisor (HV) and secure memory managed by Ultravisor (UV).
HV is informed about the guest's transition to secure mode via hcalls:
H_SVM_INIT_START: Initiate securing a VM
H_SVM_INIT_DONE: Conclude securing a VM
As part of H_SVM_INIT_START, register all existing memslots with
the UV. H_SVM_INIT_DONE call by UV informs HV that transition of
the guest to secure mode is complete.
These two states (transition to secure mode STARTED and transition
to secure mode COMPLETED) are recorded in kvm->arch.secure_guest.
Setting these states will cause the assembly code that enters the
guest to call the UV_RETURN ucall instead of trying to enter the
guest directly.
Migration of pages betwen normal and secure memory of secure
guest is implemented in H_SVM_PAGE_IN and H_SVM_PAGE_OUT hcalls.
H_SVM_PAGE_IN: Move the content of a normal page to secure page
H_SVM_PAGE_OUT: Move the content of a secure page to normal page
Private ZONE_DEVICE memory equal to the amount of secure memory
available in the platform for running secure guests is created.
Whenever a page belonging to the guest becomes secure, a page from
this private device memory is used to represent and track that secure
page on the HV side. The movement of pages between normal and secure
memory is done via migrate_vma_pages() using UV_PAGE_IN and
UV_PAGE_OUT ucalls.
In order to prevent the device private pages (that correspond to pages
of secure guest) from participating in KSM merging, H_SVM_PAGE_IN
calls ksm_madvise() under read version of mmap_sem. However
ksm_madvise() needs to be under write lock. Hence we call
kvmppc_svm_page_in with mmap_sem held for writing, and it then
downgrades to a read lock after calling ksm_madvise.
[paulus@ozlabs.org - roll in patch "KVM: PPC: Book3S HV: Take write
mmap_sem when calling ksm_madvise"]
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We failed to activate the mitigation for Spectre-RSB (Return Stack
Buffer, aka. ret2spec) on context switch, on CPUs prior to Power9
DD2.3.
That allows a process to poison the RSB (called Link Stack on Power
CPUs) and possibly misdirect speculative execution of another process.
If the victim process can be induced to execute a leak gadget then it
may be possible to extract information from the victim via a side
channel.
The fix is to correctly activate the link stack flush mitigation on
all CPUs that have any mitigation of Spectre v2 in userspace enabled.
There's a second commit which adds a link stack flush in the KVM guest
exit path. A leak via that path has not been demonstrated, but we
believe it's at least theoretically possible.
This is the fix for CVE-2019-18660.
-----BEGIN PGP SIGNATURE-----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=NQFt
-----END PGP SIGNATURE-----
Merge tag 'powerpc-spectre-rsb' of powerpc-CVE-2019-18660.bundle
Pull powerpc Spectre-RSB fixes from Michael Ellerman:
"We failed to activate the mitigation for Spectre-RSB (Return Stack
Buffer, aka. ret2spec) on context switch, on CPUs prior to Power9
DD2.3.
That allows a process to poison the RSB (called Link Stack on Power
CPUs) and possibly misdirect speculative execution of another process.
If the victim process can be induced to execute a leak gadget then it
may be possible to extract information from the victim via a side
channel.
The fix is to correctly activate the link stack flush mitigation on
all CPUs that have any mitigation of Spectre v2 in userspace enabled.
There's a second commit which adds a link stack flush in the KVM guest
exit path. A leak via that path has not been demonstrated, but we
believe it's at least theoretically possible.
This is the fix for CVE-2019-18660"
* tag 'powerpc-spectre-rsb' of /home/torvalds/Downloads/powerpc-CVE-2019-18660.bundle:
KVM: PPC: Book3S HV: Flush link stack on guest exit to host kernel
powerpc/book3s64: Fix link stack flush on context switch
- Two fixes from Greg Kurz to fix memory leak bugs in the XIVE code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl3bJKwACgkQnZrqdyxj
cZ92xQgAhgnARWJwh+uazayNrwB12TJA7G25RO8CUEwWaAY/io5QeO7nQCmNZ3cf
TflQpI1dL5qFpzU7uNunHqdqyhlaD0wwkHfrN71molr5sA1uRlIyxwwkE6coZQEC
n/LiGayoxqt2Ra06H4L4SGSjb7fcCl8eYjC3xjTx9Zdf/iXVcwYprBch5kcrToLV
s0NvRvDgwcaqsxQyybTO0wRvME/qz9JFtNUgl6H4PNSt3l/yv+rM+BgjyNR3tyKu
B1G4937GqBIAV4jYmK0a/LDnNfxs9EmOjuJLKCHmVxlfbsg8wasNk3kj+mdrh2O3
ZjCdh782GyGwp/ysddOHmIhXFyQMhQ==
=9kV2
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Second KVM PPC update for 5.5
- Two fixes from Greg Kurz to fix memory leak bugs in the XIVE code.
We need to check the host page size is big enough to accomodate the
EQ. Let's do this before taking a reference on the EQ page to avoid
a potential leak if the check fails.
Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297c5 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The EQ page is allocated by the guest and then passed to the hypervisor
with the H_INT_SET_QUEUE_CONFIG hcall. A reference is taken on the page
before handing it over to the HW. This reference is dropped either when
the guest issues the H_INT_RESET hcall or when the KVM device is released.
But, the guest can legitimately call H_INT_SET_QUEUE_CONFIG several times,
either to reset the EQ (vCPU hot unplug) or to set a new EQ (guest reboot).
In both cases the existing EQ page reference is leaked because we simply
overwrite it in the XIVE queue structure without calling put_page().
This is especially visible when the guest memory is backed with huge pages:
start a VM up to the guest userspace, either reboot it or unplug a vCPU,
quit QEMU. The leak is observed by comparing the value of HugePages_Free in
/proc/meminfo before and after the VM is run.
Ideally we'd want the XIVE code to handle the EQ page de-allocation at the
platform level. This isn't the case right now because the various XIVE
drivers have different allocation needs. It could maybe worth introducing
hooks for this purpose instead of exposing XIVE internals to the drivers,
but this is certainly a huge work to be done later.
In the meantime, for easier backport, fix both vCPU unplug and guest reboot
leaks by introducing a wrapper around xive_native_configure_queue() that
does the necessary cleanup.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297c5 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
On some systems that are vulnerable to Spectre v2, it is up to
software to flush the link stack (return address stack), in order to
protect against Spectre-RSB.
When exiting from a guest we do some house keeping and then
potentially exit to C code which is several stack frames deep in the
host kernel. We will then execute a series of returns without
preceeding calls, opening up the possiblity that the guest could have
poisoned the link stack, and direct speculative execution of the host
to a gadget of some sort.
To prevent this we add a flush of the link stack on exit from a guest.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Add capability to tell userspace whether we can single-step the guest.
* Improve the allocation of XIVE virtual processor IDs, to reduce the
risk of running out of IDs when running many VMs on POWER9.
* Rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
* Minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJdur0ZAAoJEJ2a6ncsY3Gf/xoH/j4wIOKcSjXFxPBAPvvR01Ld
Yt3n+ly/388uMuB4egsM/H+50CK8mpsMA02mQ40nwD4XoTFbOwhKS5wbgd4rQCoX
KtYr1Ylz+D4egw5W0c8Bu7Qdipt8TvKtSFGqDbARWg9oNiN0ZNd0zbuuzA9VpFkL
e58iwUHj1umWqPzHloqtHTyP1jakd9MMLoY5k+BpRKWSwj9ljUNi6JTGv/j8h2f/
JgKEXQ5Ug7Q3eqkMA+jx5fR5OL39rgDwhczd8WxSPz75UD5D3ijuEcmfXsJcMNHL
APggspJI6CHkjYNFAsGoPX4/MQwo0EOJMlWIgGxIoKAiHZbzCxJkYFb8Ibg59GU=
=LodM
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM PPC update for 5.5
* Add capability to tell userspace whether we can single-step the guest.
* Improve the allocation of XIVE virtual processor IDs, to reduce the
risk of running out of IDs when running many VMs on POWER9.
* Rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
* Minor cleanups and improvements.
Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed
reference[*] to the VM when installing a new file descriptor fails. KVM
expects the refcount to remain valid in this case, as the in-progress
ioctl() has an explicit reference to the VM. The primary motiviation
for the helper is to document that the 'kvm' pointer is still valid
after putting the borrowed reference, e.g. to document that doing
mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken.
[*] When exposing a new object to userspace via a file descriptor, e.g.
a new vcpu, KVM grabs a reference to itself (the VM) prior to making
the object visible to userspace to avoid prematurely freeing the VM
in the scenario where userspace immediately closes file descriptor.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AIL=2 mode has no known users, so is not well tested or supported.
Disallow guests from selecting this mode because it may become
deprecated in future versions of the architecture.
This policy decision is not left to QEMU because KVM support is
required for AIL=2 (when injecting interrupts).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmppc_inject_interrupt does not implement LPCR[AIL]!=0 modes, which
can result in the guest receiving interrupts as if LPCR[AIL]=0
contrary to the ISA.
In practice, Linux guests cope with this deviation, but it should be
fixed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This consolidates the HV interrupt delivery logic into one place.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
reset_msr sets the MSR for interrupt injection, but it's cleaner and
more flexible to provide a single op to set both MSR and PC for the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Add a new attribute to both XIVE and XICS-on-XIVE KVM devices so that
userspace can tell how many interrupt servers it needs. If a VM needs
less than the current default of KVM_MAX_VCPUS (2048), we can allocate
less VPs in OPAL. Combined with a core stride (VSMT) that matches the
number of guest threads per core, this may substantially increases the
number of VMs that can run concurrently with an in-kernel XIVE device.
Since the legacy XIVE KVM device is exposed to userspace through the
XICS KVM API, a new attribute group is added to it for this purpose.
While here, fix the syntax of the existing KVM_DEV_XICS_GRP_SOURCES
in the XICS documentation.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The XIVE VP is an internal structure which allow the XIVE interrupt
controller to maintain the interrupt context state of vCPUs non
dispatched on HW threads.
When a guest is started, the XIVE KVM device allocates a block of
XIVE VPs in OPAL, enough to accommodate the highest possible vCPU
id KVM_MAX_VCPU_ID (16384) packed down to KVM_MAX_VCPUS (2048).
With a guest's core stride of 8 and a threading mode of 1 (QEMU's
default), a VM must run at least 256 vCPUs to actually need such a
range of VPs.
A POWER9 system has a limited XIVE VP space : 512k and KVM is
currently wasting this HW resource with large VP allocations,
especially since a typical VM likely runs with a lot less vCPUs.
Make the size of the VP block configurable. Add an nr_servers
field to the XIVE structure and a function to set it for this
purpose.
Split VP allocation out of the device create function. Since the
VP block isn't used before the first vCPU connects to the XIVE KVM
device, allocation is now performed by kvmppc_xive_connect_vcpu().
This gives the opportunity to set nr_servers in between:
kvmppc_xive_create() / kvmppc_xive_native_create()
.
.
kvmppc_xive_set_nr_servers()
.
.
kvmppc_xive_connect_vcpu() / kvmppc_xive_native_connect_vcpu()
The connect_vcpu() functions check that the vCPU id is below nr_servers
and if it is the first vCPU they allocate the VP block. This is protected
against a concurrent update of nr_servers by kvmppc_xive_set_nr_servers()
with the xive->lock mutex.
Also, the block is allocated once for the device lifetime: nr_servers
should stay constant otherwise connect_vcpu() could generate a boggus
VP id and likely crash OPAL. It is thus forbidden to update nr_servers
once the block is allocated.
If the VP allocation fail, return ENOSPC which seems more appropriate to
report the depletion of system wide HW resource than ENOMEM or ENXIO.
A VM using a stride of 8 and 1 thread per core with 32 vCPUs would hence
only need 256 VPs instead of 2048. If the stride is set to match the number
of threads per core, this goes further down to 32.
This will be exposed to userspace by a subsequent patch.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reduce code duplication by consolidating the checking of vCPU ids and VP
ids to a common helper used by both legacy and native XIVE KVM devices.
And explain the magic with a comment.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Print out the VP id of each connected vCPU, this allow to see:
- the VP block base in which OPAL encodes information that may be
useful when debugging
- the packed vCPU id which may differ from the raw vCPU id if the
latter is >= KVM_MAX_VCPUS (2048)
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
If we cannot allocate the XIVE VPs in OPAL, the creation of a XIVE or
XICS-on-XIVE device is aborted as expected, but we leave kvm->arch.xive
set forever since the release method isn't called in this case. Any
subsequent tentative to create a XIVE or XICS-on-XIVE for this VM will
thus always fail (DoS). This is a problem for QEMU since it destroys
and re-creates these devices when the VM is reset: the VM would be
restricted to using the much slower emulated XIVE or XICS forever.
As an alternative to adding rollback, do not assign kvm->arch.xive before
making sure the XIVE VPs are allocated in OPAL.
Cc: stable@vger.kernel.org # v5.2
Fixes: 5422e95103 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Given that in kvm_create_vm() there is:
kvm->mm = current->mm;
And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
return -EIO;
I see no reason to keep using current->mm instead of kvm->mm.
By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reduces the number of calls to get_current() in order to get the value of
current->mm by doing it once and storing the value, since it is not
supposed to change inside the same process).
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When calling the KVM_SET_GUEST_DEBUG ioctl, userspace might request
the next instruction to be single stepped via the
KVM_GUESTDBG_SINGLESTEP control bit of the kvm_guest_debug structure.
This patch adds the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability in order
to inform userspace about the state of single stepping support.
We currently don't have support for guest single stepping implemented
in Book3S HV so the capability is only present for Book3S PR and
BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
kvmhv_switch_to_host() in arch/powerpc/kvm/book3s_hv_rmhandlers.S
needs to set kvmppc_vcore->in_guest to 0 to signal secondary CPUs to
continue. This happens after resetting the PCR. Before commit
13c7bb3c57 ("powerpc/64s: Set reserved PCR bits"), r0 would always
be 0 before it was stored to kvmppc_vcore->in_guest. However because
of this change in the commit:
/* Reset PCR */
ld r0, VCORE_PCR(r5)
- cmpdi r0, 0
+ LOAD_REG_IMMEDIATE(r6, PCR_MASK)
+ cmpld r0, r6
beq 18f
- li r0, 0
- mtspr SPRN_PCR, r0
+ mtspr SPRN_PCR, r6
18:
/* Signal secondary CPUs to continue */
stb r0,VCORE_IN_GUEST(r5)
We are no longer comparing r0 against 0 and loading it with 0 if it
contains something else. Hence when we store r0 to
kvmppc_vcore->in_guest, it might not be 0. This means that secondary
CPUs will not be signalled to continue. Those CPUs get stuck and
errors like the following are logged:
KVM: CPU 1 seems to be stuck
KVM: CPU 2 seems to be stuck
KVM: CPU 3 seems to be stuck
KVM: CPU 4 seems to be stuck
KVM: CPU 5 seems to be stuck
KVM: CPU 6 seems to be stuck
KVM: CPU 7 seems to be stuck
This can be reproduced with:
$ for i in `seq 1 7` ; do chcpu -d $i ; done ;
$ taskset -c 0 qemu-system-ppc64 -smp 8,threads=8 \
-M pseries,accel=kvm,kvm-type=HV -m 1G -nographic -vga none \
-kernel vmlinux -initrd initrd.cpio.xz
Fix by making sure r0 is 0 before storing it to
kvmppc_vcore->in_guest.
Fixes: 13c7bb3c57 ("powerpc/64s: Set reserved PCR bits")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191004025317.19340-1-jniethe5@gmail.com
a nested hypervisor has always been busted on Broadwell and newer processors,
and that has finally been fixed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdlzTRAAoJEL/70l94x66DElcH/Rvhn5VQE/n2J+tKEXAICxQu
FqcTBJ5x2mp04aFe7xD3kWoKRJmz2lmHdw2ahFd4sqqLfGEFF/KW24ADI33vzLx/
UmT78O0Je3PX77TRnEXy+napbJny0iT6ikTAQKPbyQ151JlqlbPvatpDXXLPWQHv
jj6nKHCvMBrhV3kgaXO3cTFl8swX1hvR9lo9PcA2gRNt+HMN0heUmpfKughPoOes
JH+UNjsEr7MYlXYlIIc9o71EYH+kgPObwlLejy0ture+dvvZEJUJjZJE8H/XG5f2
ryXG9favaCOTAvaGf0R5Es+47A3crqUr6gHS0N28QKPn7x4hehIkKpA9dXQnWIw=
=1/LN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed. Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.
Cc: kvm-ppc@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.
The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.
We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b5891c ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.
Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com
Rename the #define to indicate this is related to store vs tlbie
ordering issue. In the next patch, we will be adding another feature
flag that is used to handles ERAT flush vs tlbie ordering issue.
Fixes: a5d4b5891c ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com
On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB
of memory running the following guest configs:
guest A:
- 224GB of memory
- 56 VCPUs (sockets=1,cores=28,threads=2), where:
VCPUs 0-1 are pinned to CPUs 0-3,
VCPUs 2-3 are pinned to CPUs 4-7,
...
VCPUs 54-55 are pinned to CPUs 108-111
guest B:
- 4GB of memory
- 4 VCPUs (sockets=1,cores=4,threads=1)
with the following workloads (with KSM and THP enabled in all):
guest A:
stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M
guest B:
stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M
host:
stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M
the below soft-lockup traces were observed after an hour or so and
persisted until the host was reset (this was found to be reliably
reproducible for this configuration, for kernels 4.15, 4.18, 5.0,
and 5.3-rc5):
[ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1253.183319] rcu: 124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941
[ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709]
[ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913]
[ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331]
[ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338]
[ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525]
[ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1316.198032] rcu: 124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243
[ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1379.212629] rcu: 124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714
[ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1442.227115] rcu: 124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403
[ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds.
[ 1455.111822] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds.
[ 1455.111905] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds.
[ 1455.111986] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds.
[ 1455.112068] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds.
[ 1455.112159] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds.
[ 1455.112231] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds.
[ 1455.112303] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds.
[ 1455.112392] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
CPUs 45, 24, and 124 are stuck on spin locks, likely held by
CPUs 105 and 31.
CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on
target CPU 42. For instance:
# CPU 105 registers (via xmon)
R00 = c00000000020b20c R16 = 00007d1bcd800000
R01 = c00000363eaa7970 R17 = 0000000000000001
R02 = c0000000019b3a00 R18 = 000000000000006b
R03 = 000000000000002a R19 = 00007d537d7aecf0
R04 = 000000000000002a R20 = 60000000000000e0
R05 = 000000000000002a R21 = 0801000000000080
R06 = c0002073fb0caa08 R22 = 0000000000000d60
R07 = c0000000019ddd78 R23 = 0000000000000001
R08 = 000000000000002a R24 = c00000000147a700
R09 = 0000000000000001 R25 = c0002073fb0ca908
R10 = c000008ffeb4e660 R26 = 0000000000000000
R11 = c0002073fb0ca900 R27 = c0000000019e2464
R12 = c000000000050790 R28 = c0000000000812b0
R13 = c000207fff623e00 R29 = c0002073fb0ca808
R14 = 00007d1bbee00000 R30 = c0002073fb0ca800
R15 = 00007d1bcd600000 R31 = 0000000000000800
pc = c00000000020b260 smp_call_function_many+0x3d0/0x460
cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460
lr = c00000000020b20c smp_call_function_many+0x37c/0x460
msr = 900000010288b033 cr = 44024824
ctr = c000000000050790 xer = 0000000000000000 trap = 100
CPU 42 is running normally, doing VCPU work:
# CPU 42 stack trace (via xmon)
[link register ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv]
[c000008ed3343820] c000008ed3343850 (unreliable)
[c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv]
[c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv]
[c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm]
[c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70
[c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120
[c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80
[c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70
--- Exception: c00 (System Call) at 00007d545cfd7694
SP (7d53ff7edf50) is in userspace
It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION]
was set for CPU 42 by at least 1 of the CPUs waiting in
smp_call_function_many(), but somehow the corresponding
call_single_queue entries were never processed by CPU 42, causing the
callers to spin in csd_lock_wait() indefinitely.
Nick Piggin suggested something similar to the following sequence as
a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE
IPI messages seems to be most common, but any mix of CALL_FUNCTION and
!CALL_FUNCTION messages could trigger it):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
105: smp_muxed_ipi_set_message():
105: smb_mb()
// STORE DEFERRED DUE TO RE-ORDERING
--105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 42: // returns to executing guest
| // RE-ORDERED STORE COMPLETES
->105: message[CALL_FUNCTION] = 1
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
This can be prevented with an smp_mb() at the beginning of
kvmppc_set_host_ipi(), such that stores to message[<type>] (or other
state indicated by the host_ipi flag) are ordered vs. the store to
to host_ipi.
However, doing so might still allow for the following scenario (not
yet observed):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
// STORE DEFERRED DUE TO RE-ORDERING
-- 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 105: smp_muxed_ipi_set_message():
| 105: smb_mb()
| 105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| // RE-ORDERED STORE COMPLETES
-> 42: kvmppc_set_host_ipi(42, 0)
42: // returns to executing guest
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
Fixing this scenario would require an smp_mb() *after* clearing
host_ipi flag in kvmppc_set_host_ipi() to order the store vs.
subsequent processing of IPI messages.
To handle both cases, this patch splits kvmppc_set_host_ipi() into
separate set/clear functions, where we execute smp_mb() prior to
setting host_ipi flag, and after clearing host_ipi flag. These
functions pair with each other to synchronize the sender and receiver
sides.
With that change in place the above workload ran for 20 hours without
triggering any lock-ups.
Fixes: 755563bc79 ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com
Currently the reserved bits of the Processor Compatibility
Register (PCR) are cleared as per the Programming Note in Section
1.3.3 of version 3.0B of the Power ISA. This causes all new
architecture features to be made available when running on newer
processors with new architecture features added to the PCR as bits
must be set to disable a given feature.
For example to disable new features added as part of Version 2.07 of
the ISA the corresponding bit in the PCR needs to be set.
As new processor features generally require explicit kernel support
they should be disabled until such support is implemented. Therefore
kernels should set all unknown/reserved bits in the PCR such that any
new architecture features which the kernel does not currently know
about get disabled.
An update is planned to the ISA to clarify that the PCR is an
exception to the Programming Note on reserved bits in Section 1.3.3.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au
- Initial support for running on a system with an Ultravisor, which is software
that runs below the hypervisor and protects guests against some attacks by
the hypervisor.
- Support for building the kernel to run as a "Secure Virtual Machine", ie. as
a guest capable of running on a system with an Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with medium
sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas macros, both
to make it more readable and also enable some future optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to:
Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh
Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin
Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy,
Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens,
David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar,
Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari
Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras,
Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor,
Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram
Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj,
Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung
Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=WlW+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
and bugfixes
* PPC: various minor fixes and preparation
* x86: bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT), some IPI optimizations
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
=w6I3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- ioctl hardening
- selftests
ARM:
- ITS translation cache
- support for 512 vCPUs
- various cleanups and bugfixes
PPC:
- various minor fixes and preparation
x86:
- bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT)
- some IPI optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
KVM: X86: Use IPI shorthands in kvm guest when support
KVM: x86: Fix INIT signal handling in various CPU states
KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
KVM: VMX: Stop the preemption timer during vCPU reset
KVM: LAPIC: Micro optimize IPI latency
kvm: Nested KVM MMUs need PAE root too
KVM: x86: set ctxt->have_exception in x86_decode_insn()
KVM: x86: always stop emulation on page fault
KVM: nVMX: trace nested VM-Enter failures detected by H/W
KVM: nVMX: add tracepoint for failed nested VM-Enter
x86: KVM: svm: Fix a check in nested_svm_vmrun()
KVM: x86: Return to userspace with internal error on unexpected exit reason
KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
doc: kvm: Fix return description of KVM_SET_MSRS
KVM: X86: Tune PLE Window tracepoint
KVM: VMX: Change ple_window type to unsigned int
KVM: X86: Remove tailing newline for tracepoints
KVM: X86: Trace vcpu_id for vmexit
KVM: x86: Manually calculate reserved bits when loading PDPTRS
...
- Some prep for extending the uses of the rmap array
- Various minor fixes
- Commits from the powerpc topic/ppc-kvm branch, which fix a problem
with interrupts arriving after free_irq, causing host hangs and crashes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJdZwd7AAoJEJ2a6ncsY3GffDQH/2q+c2z56ZO2lzfk4Hy9piWn
Z9PR9n72Z6TiMyVCl7CtLCyI+lRy3QVZnol14ugQNX4aFJiiwDGRHJF0wNxjeok4
4DAIqBc60qD2dkp1LwtUM1YsLsr/n3tdrGU1b0VrHGoGTVhJDpbjhJsblXZ1ujGr
KxQ1Uf4XsW5T7kovHuzj+FFlbB5nbEX5cBIU68maBGZSCl355wCOW35rKVITTIIv
+VKkO2aNbk6bRmZmOi2v1D65eQa2+TKe/o48TneJv1WhL4h4hDyHdmVeWRNoAI6C
ve8mwCAVs7IITjCJ1qcGnI8NzVxMlXgwVir7sQ1aslRLZfeRAm5FOIPNEz1ADXs=
=3oLd
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.4
- Some prep for extending the uses of the rmap array
- Various minor fixes
- Commits from the powerpc topic/ppc-kvm branch, which fix a problem
with interrupts arriving after free_irq, causing host hangs and crashes.
Introduce two options to control the use of the tlbie instruction. A
boot time option which completely disables the kernel using the
instruction, this is currently incompatible with HASH MMU, KVM, and
coherent accelerators.
And a debugfs option can be switched at runtime and avoids using tlbie
for invalidating CPU TLBs for normal process and kernel address
mappings. Coherent accelerators are still managed with tlbie, as will
KVM partition scope translations.
Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a
basic implementation which does not attempt to make any optimisation
beyond the tlbie implementation.
This is useful for performance testing among other things. For example
in certain situations on large systems, using IPIs may be faster than
tlbie as they can be directed rather than broadcast. Later we may also
take advantage of the IPIs to do more interesting things such as trim
the mm cpumask more aggressively.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-7-npiggin@gmail.com
There should be no functional changes.
- Use calls to existing radix_tlb.c functions in flush_partition.
- Rename radix__flush_tlb_lpid to radix__flush_all_lpid and similar,
because they flush everything, matching flush_all_mm rather than
flush_tlb_mm for the lpid.
- Remove some unused radix_tlb.c flush primitives.
Signed-off: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-3-npiggin@gmail.com
When an SVM makes an hypercall or incurs some other exception, the
Ultravisor usually forwards (a.k.a. reflects) the exceptions to the
Hypervisor. After processing the exception, Hypervisor uses the
UV_RETURN ultracall to return control back to the SVM.
The expected register state on entry to this ultracall is:
* Non-volatile registers are restored to their original values.
* If returning from an hypercall, register R0 contains the return value
(unlike other ultracalls) and, registers R4 through R12 contain any
output values of the hypercall.
* R3 contains the ultracall number, i.e UV_RETURN.
* If returning with a synthesized interrupt, R2 contains the
synthesized interrupt number.
Thanks to input from Paul Mackerras, Ram Pai and Mike Anderson.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190822034838.27876-8-cclaudio@linux.ibm.com
Invalidating a TCE cache entry for each updated TCE is quite expensive.
This makes use of the new iommu_table_ops::xchg_no_kill()/tce_kill()
callbacks to bring down the time spent in mapping a huge guest DMA window;
roughly 20s to 10s for each guest's 100GB of DMA space.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190829085252.72370-3-aik@ozlabs.ru
