mirror of
https://github.com/torvalds/linux.git
synced 2024-12-09 12:41:33 +00:00
7f4ce97cd5
1148450 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Andrii Nakryiko
|
7f4ce97cd5 |
bpf: generalize MAYBE_NULL vs non-MAYBE_NULL rule
Make generic check to prevent XXX_OR_NULL and XXX register types to be intermixed. While technically in some situations it could be safe, it's impossible to enforce due to the loss of an ID when converting XXX_OR_NULL to its non-NULL variant. So prevent this in general, not just for PTR_TO_MAP_KEY and PTR_TO_MAP_VALUE. PTR_TO_MAP_KEY_OR_NULL and PTR_TO_MAP_VALUE_OR_NULL checks, which were previously special-cased, are simplified to generic check that takes into account range_within() and tnum_in(). This is correct as BPF verifier doesn't allow arithmetic on XXX_OR_NULL register types, so var_off and ranges should stay zero. But even if in the future this restriction is lifted, it's even more important to enforce that var_off and ranges are compatible, otherwise it's possible to construct case where this can be exploited to bypass verifier's memory range safety checks. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20221223054921.958283-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Andrii Nakryiko
|
a73bf9f2d9 |
bpf: reorganize struct bpf_reg_state fields
Move id and ref_obj_id fields after scalar data section (var_off and ranges). This is necessary to simplify next patch which will change regsafe()'s logic to be safer, as it makes the contents that has to be an exact match (type-specific parts, off, type, and var_off+ranges) a single sequential block of memory, while id and ref_obj_id should always be remapped and thus can't be memcp()'ed. There are few places that assume that var_off is after id/ref_obj_id to clear out id/ref_obj_id with the single memset(0). These are changed to explicitly zero-out id/ref_obj_id fields. Other places are adjusted to preserve exact byte-by-byte comparison behavior. No functional changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20221223054921.958283-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Andrii Nakryiko
|
e8f55fcf77 |
bpf: teach refsafe() to take into account ID remapping
states_equal() check performs ID mapping between old and new states to establish a 1-to-1 correspondence between IDs, even if their absolute numberic values across two equivalent states differ. This is important both for correctness and to avoid unnecessary work when two states are equivalent. With recent changes we partially fixed this logic by maintaining ID map across all function frames. This patch also makes refsafe() check take into account (and maintain) ID map, making states_equal() behavior more optimal and correct. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20221223054921.958283-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Ricardo Ribalda
|
cfca00767f |
bpf: Remove unused field initialization in bpf's ctl_table
Maxlen is used by standard proc_handlers such as proc_dointvec(), but in this case we have our own proc_handler via bpf_stats_handler(). Therefore, remove the initialization. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20221221-bpf-syscall-v1-0-9550f5f2c3fc@chromium.org |
||
Daniel Borkmann
|
5fbf8c24b6 |
selftests/bpf: Add jit probe_mem corner case tests to s390x denylist
BPF CI fails for s390x with the following result:
[...]
All error logs:
libbpf: prog 'test_jit_probe_mem': BPF program load failed: ERROR: strerror_r(524)=22
libbpf: prog 'test_jit_probe_mem':
-- BEGIN PROG LOAD LOG --
JIT does not support calling kernel function
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'test_jit_probe_mem': failed to load: -524
libbpf: failed to load object 'jit_probe_mem'
libbpf: failed to load BPF skeleton 'jit_probe_mem': -524
test_jit_probe_mem:FAIL:jit_probe_mem__open_and_load unexpected error: -524
#89 jit_probe_mem:FAIL
[...]
Add the test to the deny list.
Fixes:
|
||
Dave Marchevsky
|
59fe41b525 |
selftests/bpf: Add verifier test exercising jit PROBE_MEM logic
This patch adds a test exercising logic that was fixed / improved in the previous patch in the series, as well as general sanity checking for jit's PROBE_MEM logic which should've been unaffected by the previous patch. The added verifier test does the following: * Acquire a referenced kptr to struct prog_test_ref_kfunc using existing net/bpf/test_run.c kfunc * Helper returns ptr to a specific prog_test_ref_kfunc whose first two fields - both ints - have been prepopulated w/ vals 42 and 108, respectively * kptr_xchg the acquired ptr into an arraymap * Do a direct map_value load of the just-added ptr * Goal of all this setup is to get an unreferenced kptr pointing to struct with ints of known value, which is the result of this step * Using unreferenced kptr obtained in previous step, do loads of prog_test_ref_kfunc.a (offset 0) and .b (offset 4) * Then incr the kptr by 8 and load prog_test_ref_kfunc.a again (this time at offset -8) * Add all the loaded ints together and return Before the PROBE_MEM fixes in previous patch, the loads at offset 0 and 4 would succeed, while the load at offset -8 would incorrectly fail runtime check emitted by the JIT and 0 out dst reg as a result. This confirmed by retval of 150 for this test before previous patch - since second .a read is 0'd out - and a retval of 192 with the fixed logic. The test exercises the two optimizations to fixed logic added in last patch as well: * First load, with insn "r8 = *(u32 *)(r9 + 0)" exercises "insn->off is 0, no need to add / sub from src_reg" optimization * Third load, with insn "r9 = *(u32 *)(r9 - 8)" exercises "src_reg == dst_reg, no need to restore src_reg after load" optimization Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221216214319.3408356-2-davemarchevsky@fb.com |
||
Dave Marchevsky
|
90156f4bfa |
bpf, x86: Improve PROBE_MEM runtime load check
This patch rewrites the runtime PROBE_MEM check insns emitted by the BPF JIT in order to ensure load safety. The changes in the patch fix two issues with the previous logic and more generally improve size of emitted code. Paragraphs between this one and "FIX 1" below explain the purpose of the runtime check and examine the current implementation. When a load is marked PROBE_MEM - e.g. due to PTR_UNTRUSTED access - the address being loaded from is not necessarily valid. The BPF jit sets up exception handlers for each such load which catch page faults and 0 out the destination register. Arbitrary register-relative loads can escape this exception handling mechanism. Specifically, a load like dst_reg = *(src_reg + off) will not trigger BPF exception handling if (src_reg + off) is outside of kernel address space, resulting in an uncaught page fault. A concrete example of such behavior is a program like: struct result { char space[40]; long a; }; /* if err, returns ERR_PTR(-EINVAL) */ struct result *ptr = get_ptr_maybe_err(); long x = ptr->a; If get_ptr_maybe_err returns ERR_PTR(-EINVAL) and the result isn't checked for err, 'result' will be (u64)-EINVAL, a number close to U64_MAX. The ptr->a load will be > U64_MAX and will wrap over to a small positive u64, which will be in userspace and thus not covered by BPF exception handling mechanism. In order to prevent such loads from occurring, the BPF jit emits some instructions which do runtime checking of (src_reg + off) and skip the actual load if it's out of range. As an example, here are instructions emitted for a %rdi = *(%rdi + 0x10) PROBE_MEM load: 72: movabs $0x800000000010,%r11 --| 7c: cmp %r11,%rdi |- 72 - 7f: Check 1 7f: jb 0x000000000000008d --| 81: mov %rdi,%r11 -----| 84: add $0x0000000000000010,%r11 |- 81-8b: Check 2 8b: jnc 0x0000000000000091 -----| 8d: xor %edi,%edi ---- 0 out dest 8f: jmp 0x0000000000000095 91: mov 0x10(%rdi),%rdi ---- Actual load 95: The JIT considers kernel address space to start at MAX_TASK_SIZE + PAGE_SIZE. Determining whether a load will be outside of kernel address space should be a simple check: (src_reg + off) >= MAX_TASK_SIZE + PAGE_SIZE But because there is only one spare register when the checking logic is emitted, this logic is split into two checks: Check 1: src_reg >= (MAX_TASK_SIZE + PAGE_SIZE - off) Check 2: src_reg + off doesn't wrap over U64_MAX and result in small pos u64 Emitted insns implementing Checks 1 and 2 are annotated in the above example. Check 1 can be done with a single spare register since the source reg by definition is the left-hand-side of the inequality. Since adding 'off' to both sides of Check 1's inequality results in the original inequality we want, it's equivalent to testing that inequality. Except in the case where src_reg + off wraps past U64_MAX, which is why Check 2 needs to actually add src_reg + off if Check 1 passes - again using the single spare reg. FIX 1: The Check 1 inequality listed above is not what current code is doing. Current code is a bit more pessimistic, instead checking: src_reg >= (MAX_TASK_SIZE + PAGE_SIZE + abs(off)) The 0x800000000010 in above example is from this current check. If Check 1 was corrected to use the correct right-hand-side, the value would be 0x7ffffffffff0. This patch changes the checking logic more broadly (FIX 2 below will elaborate), fixing this issue as a side-effect of the rewrite. Regardless, it's important to understand why Check 1 should've been doing MAX_TASK_SIZE + PAGE_SIZE - off before proceeding. FIX 2: Current code relies on a 'jnc' to determine whether src_reg + off addition wrapped over. For negative offsets this logic is incorrect. Consider Check 2 insns emitted when off = -0x10: 81: mov %rdi,%r11 84: add 0xfffffffffffffff0,%r11 8b: jnc 0x0000000000000091 2's complement representation of -0x10 is a large positive u64. Any value of src_reg that passes Check 1 will result in carry flag being set after (src_reg + off) addition. So a load with any negative offset will always fail Check 2 at runtime and never do the actual load. This patch fixes the negative offset issue by rewriting both checks in order to not rely on carry flag. The rewrite takes advantage of the fact that, while we only have one scratch reg to hold arbitrary values, we know the offset at JIT time. This we can use src_reg as a temporary scratch reg to hold src_reg + offset since we can return it to its original value by later subtracting offset. As a result we can directly check the original inequality we care about: (src_reg + off) >= MAX_TASK_SIZE + PAGE_SIZE For a load like %rdi = *(%rsi + -0x10), this results in emitted code: 43: movabs $0x800000000000,%r11 4d: add $0xfffffffffffffff0,%rsi --- src_reg += off 54: cmp %r11,%rsi --- Check original inequality 57: jae 0x000000000000005d 59: xor %edi,%edi 5b: jmp 0x0000000000000061 5d: mov 0x0(%rdi),%rsi --- Actual Load 61: sub $0xfffffffffffffff0,%rsi --- src_reg -= off Note that the actual load is always done with offset 0, since previous insns have already done src_reg += off. Regardless of whether the new check succeeds or fails, insn 61 is always executed, returning src_reg to its original value. Because the goal of these checks is to ensure that loaded-from address will be protected by BPF exception handler, the new check can safely ignore any wrapover from insn 4d. If such wrapped-over address passes insn 54 + 57's cmp-and-jmp it will have such protection so the load can proceed. IMPROVEMENTS: The above improved logic is 8 insns vs original logic's 9, and has 1 fewer jmp. The number of checking insns can be further improved in common scenarios: If src_reg == dst_reg, the actual load insn will clobber src_reg, so there's no original src_reg state for the sub insn immediately following the load to restore, so it can be omitted. In fact, it must be omitted since it would incorrectly subtract from the result of the load if it wasn't. So for src_reg == dst_reg, JIT emits these insns: 3c: movabs $0x800000000000,%r11 46: add $0xfffffffffffffff0,%rdi 4d: cmp %r11,%rdi 50: jae 0x0000000000000056 52: xor %edi,%edi 54: jmp 0x000000000000005a 56: mov 0x0(%rdi),%rdi 5a: The only difference from larger example being the omitted sub, which would've been insn 5a in this example. If offset == 0, we can similarly omit the sub as in previous case, since there's nothing added to subtract. For the same reason we can omit the addition as well, resulting in JIT emitting these insns: 46: movabs $0x800000000000,%r11 4d: cmp %r11,%rdi 50: jae 0x0000000000000056 52: xor %edi,%edi 54: jmp 0x000000000000005a 56: mov 0x0(%rdi),%rdi 5a: Although the above example also has src_reg == dst_reg, the same offset == 0 optimization is valid to apply if src_reg != dst_reg. To summarize the improvements in emitted insn count for the check-and-load: BEFORE: 8 check insns, 3 jmps AFTER (general case): 7 check insns, 2 jmps (12.5% fewer insn, 33% jmp) AFTER (src == dst): 6 check insns, 2 jmps (25% fewer insn) AFTER (offset == 0): 5 check insns, 2 jmps (37.5% fewer insn) (Above counts don't include the 1 load insn, just checking around it) Based on BPF bytecode + JITted x86 insn I saw while experimenting with these improvements, I expect the src_reg == dst_reg case to occur most often, followed by offset == 0, then the general case. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221216214319.3408356-1-davemarchevsky@fb.com |
||
Andrii Nakryiko
|
4ec38eda85 |
libbpf: start v1.2 development cycle
Bump current version for new development cycle to v1.2. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20221221180049.853365-1-andrii@kernel.org Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Martin KaFai Lau
|
552d42a356 |
bpf: Reduce smap->elem_size
'struct bpf_local_storage_elem' has an unused 56 byte padding at the end due to struct's cache-line alignment requirement. This padding space is overlapped by storage value contents, so if we use sizeof() to calculate the total size, we overinflate it by 56 bytes. Use offsetof() instead to calculate more exact memory use. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221221013036.3427431-1-martin.lau@linux.dev |
||
Andrii Nakryiko
|
7b43df6c6e |
Merge branch 'bpftool: improve error handing for missing .BTF section'
Changbin Du says: ==================== Display error message for missing ".BTF" section and clean up empty vmlinux.h file. v3: - fix typo and make error message consistent. (Andrii Nakryiko) - split out perf change. v2: - remove vmlinux specific error info. - use builtin target .DELETE_ON_ERROR: to delete empty vmlinux.h ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org> |
||
Changbin Du
|
e7f0d5cdd0 |
bpf: makefiles: Do not generate empty vmlinux.h
Remove the empty vmlinux.h if bpftool failed to dump btf info. The empty vmlinux.h can hide real error when reading output of make. This is done by adding .DELETE_ON_ERROR special target in related makefiles. Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20221217223509.88254-3-changbin.du@gmail.com |
||
Changbin Du
|
e6b4e1d759 |
libbpf: Show error info about missing ".BTF" section
Show the real problem instead of just saying "No such file or directory". Now will print below info: libbpf: failed to find '.BTF' ELF section in /home/changbin/work/linux/vmlinux Error: failed to load BTF from /home/changbin/work/linux/vmlinux: No such file or directory Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221217223509.88254-2-changbin.du@gmail.com |
||
Khem Raj
|
1520e8466d |
libbpf: Fix build warning on ref_ctr_off for 32-bit architectures
Clang warns on 32-bit ARM on this comparision: libbpf.c:10497:18: error: result of comparison of constant 4294967296 with expression of type 'size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (ref_ctr_off >= (1ULL << PERF_UPROBE_REF_CTR_OFFSET_BITS)) ~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Typecast ref_ctr_off to __u64 in the check conditional, it is false on 32bit anyways. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221219191526.296264-1-raj.khem@gmail.com |
||
Maryam Tahhan
|
cafb92d719 |
docs: BPF_MAP_TYPE_SOCK[MAP|HASH]
Add documentation for BPF_MAP_TYPE_SOCK[MAP|HASH] including kernel versions introduced, usage and examples. Signed-off-by: Maryam Tahhan <mtahhan@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/bpf/20221219095512.26534-1-mtahhan@redhat.com |
||
Christian Ehrig
|
ac6e45e058 |
selftests/bpf: Add BPF_F_NO_TUNNEL_KEY test
This patch adds a selftest simulating a GRE sender and receiver using tunnel headers without tunnel keys. It validates if packets encapsulated using BPF_F_NO_TUNNEL_KEY are decapsulated by a GRE receiver not configured with tunnel keys. Signed-off-by: Christian Ehrig <cehrig@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20221218051734.31411-2-cehrig@cloudflare.com |
||
Christian Ehrig
|
e26aa600ba |
bpf: Add flag BPF_F_NO_TUNNEL_KEY to bpf_skb_set_tunnel_key()
This patch allows to remove TUNNEL_KEY from the tunnel flags bitmap when using bpf_skb_set_tunnel_key by providing a BPF_F_NO_TUNNEL_KEY flag. On egress, the resulting tunnel header will not contain a tunnel key if the protocol and implementation supports it. At the moment bpf_tunnel_key wants a user to specify a numeric tunnel key. This will wrap the inner packet into a tunnel header with the key bit and value set accordingly. This is problematic when using a tunnel protocol that supports optional tunnel keys and a receiving tunnel device that is not expecting packets with the key bit set. The receiver won't decapsulate and drop the packet. RFC 2890 and RFC 2784 GRE tunnels are examples where this flag is useful. It allows for generating packets, that can be decapsulated by a GRE tunnel device not operating in collect metadata mode or not expecting the key bit set. Signed-off-by: Christian Ehrig <cehrig@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20221218051734.31411-1-cehrig@cloudflare.com |
||
Martin KaFai Lau
|
64f4660f69 |
Merge branch 'samples/bpf: fix LLVM compilation warning'
"Daniel T. Lee" says: ==================== Currently, compiling samples/bpf with LLVM emits several warning. They are only small details, but they do not appear when compiled with GCC. Detailed compilation command and warning logs can be found from bpf CI. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Daniel T. Lee
|
68be98e0f4 |
samples/bpf: fix uninitialized warning with test_current_task_under_cgroup
Currently, compiling samples/bpf with LLVM warns about the uninitialized use of variable with test_current_task_under_cgroup. ./samples/bpf/test_current_task_under_cgroup_user.c:57:6: warning: variable 'cg2' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (setup_cgroup_environment()) ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./samples/bpf/test_current_task_under_cgroup_user.c:106:8: note: uninitialized use occurs here close(cg2); ^~~ ./samples/bpf/test_current_task_under_cgroup_user.c:57:2: note: remove the 'if' if its condition is always false if (setup_cgroup_environment()) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./samples/bpf/test_current_task_under_cgroup_user.c:19:9: note: initialize the variable 'cg2' to silence this warning int cg2, idx = 0, rc = 1; ^ = 0 1 warning generated. This commit resolve this compiler warning by pre-initialize the variable with error for safeguard. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221218061453.6287-4-danieltimlee@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Daniel T. Lee
|
71135b77aa |
samples/bpf: replace meaningless counter with tracex4
Currently, compiling samples/bpf with LLVM warns about the unused but set variable with tracex4_user. ./samples/bpf/tracex4_user.c:54:14: warning: variable 'i' set but not used [-Wunused-but-set-variable] int map_fd, i, j = 0; ^ 1 warning generated. This commit resolve this compiler warning by replacing the meaningless counter. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221218061453.6287-3-danieltimlee@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Daniel T. Lee
|
13aa2a9284 |
samples/bpf: remove unused function with test_lru_dist
Currently, compiling samples/bpf with LLVM warns about the unused function with test_lru_dist. ./samples/bpf/test_lru_dist.c:45:19: warning: unused function 'list_empty' [-Wunused-function] static inline int list_empty(const struct list_head *head) ^ 1 warning generated. This commit resolve this compiler warning by removing the abandoned function. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221218061453.6287-2-danieltimlee@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Jiri Olsa
|
e2bb9e01d5 |
bpf: Remove trace_printk_lock
Both bpf_trace_printk and bpf_trace_vprintk helpers use static buffer guarded with trace_printk_lock spin lock. The spin lock contention causes issues with bpf programs attached to contention_begin tracepoint [1][2]. Andrii suggested we could get rid of the contention by using trylock, but we could actually get rid of the spinlock completely by using percpu buffers the same way as for bin_args in bpf_bprintf_prepare function. Adding new return 'buf' argument to struct bpf_bprintf_data and making bpf_bprintf_prepare to return also the buffer for printk helpers. [1] https://lore.kernel.org/bpf/CACkBjsakT_yWxnSWr4r-0TpPvbKm9-OBmVUhJb7hV3hY8fdCkw@mail.gmail.com/ [2] https://lore.kernel.org/bpf/CACkBjsaCsTovQHFfkqJKto6S4Z8d02ud1D7MPESrHa1cVNNTrw@mail.gmail.com/ Reported-by: Hao Sun <sunhao.th@gmail.com> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221215214430.1336195-4-jolsa@kernel.org |
||
Jiri Olsa
|
f19a405045 |
bpf: Do cleanup in bpf_bprintf_cleanup only when needed
Currently we always cleanup/decrement bpf_bprintf_nest_level variable in bpf_bprintf_cleanup if it's > 0. There's possible scenario where this could cause a problem, when bpf_bprintf_prepare does not get bin_args buffer (because num_args is 0) and following bpf_bprintf_cleanup call decrements bpf_bprintf_nest_level variable, like: in task context: bpf_bprintf_prepare(num_args != 0) increments 'bpf_bprintf_nest_level = 1' -> first irq : bpf_bprintf_prepare(num_args == 0) bpf_bprintf_cleanup decrements 'bpf_bprintf_nest_level = 0' -> second irq: bpf_bprintf_prepare(num_args != 0) bpf_bprintf_nest_level = 1 gets same buffer as task context above Adding check to bpf_bprintf_cleanup and doing the real cleanup only if we got bin_args data in the first place. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221215214430.1336195-3-jolsa@kernel.org |
||
Jiri Olsa
|
78aa1cc940 |
bpf: Add struct for bin_args arg in bpf_bprintf_prepare
Adding struct bpf_bprintf_data to hold bin_args argument for bpf_bprintf_prepare function. We will add another return argument to bpf_bprintf_prepare and pass the struct to bpf_bprintf_cleanup for proper cleanup in following changes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20221215214430.1336195-2-jolsa@kernel.org |
||
Shen Jiamin
|
0e43662e61 |
tools/resolve_btfids: Use pkg-config to locate libelf
When libelf was not installed in the standard location, it cannot be located by the current building config. Use pkg-config to help locate libelf in such cases. Signed-off-by: Shen Jiamin <shen_jiamin@comp.nus.edu.sg> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20221215044703.400139-1-shen_jiamin@comp.nus.edu.sg |
||
Andrii Nakryiko
|
4fb877aaa1 |
libbpf: Fix btf_dump's packed struct determination
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes:
|
||
Andrii Nakryiko
|
b148c8b9b9 |
selftests/bpf: Add few corner cases to test padding handling of btf_dump
Add few hand-crafted cases and few randomized cases found using script from [0] that tests btf_dump's padding logic. [0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/ Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-7-andrii@kernel.org |
||
Andrii Nakryiko
|
ea2ce1ba99 |
libbpf: Fix BTF-to-C converter's padding logic
Turns out that btf_dump API doesn't handle a bunch of tricky corner cases, as reported by Per, and further discovered using his testing Python script ([0]). This patch revamps btf_dump's padding logic significantly, making it more correct and also avoiding unnecessary explicit padding, where compiler would pad naturally. This overall topic turned out to be very tricky and subtle, there are lots of subtle corner cases. The comments in the code tries to give some clues, but comments themselves are supposed to be paired with good understanding of C alignment and padding rules. Plus some experimentation to figure out subtle things like whether `long :0;` means that struct is now forced to be long-aligned (no, it's not, turns out). Anyways, Per's script, while not completely correct in some known situations, doesn't show any obvious cases where this logic breaks, so this is a nice improvement over the previous state of this logic. Some selftests had to be adjusted to accommodate better use of natural alignment rules, eliminating some unnecessary padding, or changing it to `type: 0;` alignment markers. Note also that for when we are in between bitfields, we emit explicit bit size, while otherwise we use `: 0`, this feels much more natural in practice. Next patch will add few more test cases, found through randomized Per's script. [0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/ Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org |
||
Andrii Nakryiko
|
25a4481b41 |
libbpf: Fix btf__align_of() by taking into account field offsets
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes:
|
||
Andrii Nakryiko
|
9d2349740e |
selftests/bpf: Add non-standardly sized enum tests for btf_dump
Add few custom enum definitions testing mode(byte) and mode(word) attributes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-4-andrii@kernel.org |
||
Andrii Nakryiko
|
21a9a1bccc |
libbpf: Handle non-standardly sized enums better in BTF-to-C dumper
Turns out C allows to force enum to be 1-byte or 8-byte explicitly using mode(byte) or mode(word), respecticely. Linux sources are using this in some cases. This is imporant to handle correctly, as enum size determines corresponding fields in a struct that use that enum type. And if enum size is incorrect, this will lead to invalid struct layout. So add mode(byte) and mode(word) attribute support to btf_dump APIs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-3-andrii@kernel.org |
||
Andrii Nakryiko
|
872aec4b5f |
libbpf: Fix single-line struct definition output in btf_dump
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes:
|
||
Xin Liu
|
c9883ee9d1 |
libbpf: Optimized return value in libbpf_strerror when errno is libbpf errno
This is a small improvement in libbpf_strerror. When libbpf_strerror is used to obtain the system error description, if the length of the buf is insufficient, libbpf_sterror returns ERANGE and sets errno to ERANGE. However, this processing is not performed when the error code customized by libbpf is obtained. Make some minor improvements here, return -ERANGE and set errno to ERANGE when buf is not enough for custom description. Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221210082045.233697-1-liuxin350@huawei.com |
||
Linus Torvalds
|
7e68dd7d07 |
Networking changes for 6.2.
Core ---- - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations. - Add inet drop monitor support. - A few GRO performance improvements. - Add infrastructure for atomic dev stats, addressing long standing data races. - De-duplicate common code between OVS and conntrack offloading infrastructure. - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements. - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs. - Add the helper support for connection-tracking OVS offload. BPF --- - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF. - Make cgroup local storage available to non-cgroup attached BPF programs. - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers. - A relevant bunch of BPF verifier fixes and improvements. - Veristat tool improvements to support custom filtering, sorting, and replay of results. - Add LLVM disassembler as default library for dumping JITed code. - Lots of new BPF documentation for various BPF maps. - Add bpf_rcu_read_{,un}lock() support for sleepable programs. - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs. - Add support storing struct task_struct objects as kptrs in maps. - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values. - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions. Protocols --------- - TCP: implement Protective Load Balancing across switch links. - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path. - UDP: Introduce optional per-netns hash lookup table. - IPv6: simplify and cleanup sockets disposal. - Netlink: support different type policies for each generic netlink operation. - MPTCP: add MSG_FASTOPEN and FastOpen listener side support. - MPTCP: add netlink notification support for listener sockets events. - SCTP: add VRF support, allowing sctp sockets binding to VRF devices. - Add bridging MAC Authentication Bypass (MAB) support. - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios. - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage. - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading. - IPSec: extended ack support for more descriptive XFRM error reporting. - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking. - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks. - Tun: bump the link speed from 10Mbps to 10Gbps. - Tun/VirtioNet: implement UDP segmentation offload support. Driver API ---------- - PHY/SFP: improve power level switching between standard level 1 and the higher power levels. - New API for netdev <-> devlink_port linkage. - PTP: convert existing drivers to new frequency adjustment implementation. - DSA: add support for rx offloading. - Autoload DSA tagging driver when dynamically changing protocol. - Add new PCP and APPTRUST attributes to Data Center Bridging. - Add configuration support for 800Gbps link speed. - Add devlink port function attribute to enable/disable RoCE and migratable. - Extend devlink-rate to support strict prioriry and weighted fair queuing. - Add devlink support to directly reading from region memory. - New device tree helper to fetch MAC address from nvmem. - New big TCP helper to simplify temporary header stripping. New hardware / drivers ---------------------- - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches. - Marvel Prestera AC5X Ethernet Switch. - WangXun 10 Gigabit NIC. - Motorcomm yt8521 Gigabit Ethernet. - Microchip ksz9563 Gigabit Ethernet Switch. - Microsoft Azure Network Adapter. - Linux Automation 10Base-T1L adapter. - PHY: - Aquantia AQR112 and AQR412. - Motorcomm YT8531S. - PTP: - Orolia ART-CARD. - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices. - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices. - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets. - Realtek RTL8852BE and RTL8723DS. - Cypress.CYW4373A0 WiFi + Bluetooth combo device. Drivers ------- - CAN: - gs_usb: bus error reporting support. - kvaser_usb: listen only and bus error reporting support. - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping. - implement devlink-rate support. - support direct read from memory. - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate. - Support for enhanced events compression. - extend H/W offload packet manipulation capabilities. - implement IPSec packet offload mode. - nVidia/Mellanox (mlx4): - better big TCP support. - Netronome Ethernet NICs (nfp): - IPsec offload support. - add support for multicast filter. - Broadcom: - RSS and PTP support improvements. - AMD/SolarFlare: - netlink extened ack improvements. - add basic flower matches to offload, and related stats. - Virtual NICs: - ibmvnic: introduce affinity hint support. - small / embedded: - FreeScale fec: add initial XDP support. - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood. - TI am65-cpsw: add suspend/resume support. - Mediatek MT7986: add RX wireless wthernet dispatch support. - Realtek 8169: enable GRO software interrupt coalescing per default. - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP. - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support. - add ip6gre support. - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support. - enable flow offload support. - Renesas: - add rswitch R-Car Gen4 gPTP support. - Microchip (lan966x): - add full XDP support. - add TC H/W offload via VCAP. - enable PTP on bridge interfaces. - Microchip (ksz8): - add MTU support for KSZ8 series. - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan. - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support. - add ack signal support. - enable coredump support. - remain_on_channel support. - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities. - 320 MHz channels support. - RealTek WiFi (rtw89): - new dynamic header firmware format support. - wake-over-WLAN support. Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmOYXUcSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOk8zQP/R7BZtbJMTPiWkRnSoKHnAyupDVwrz5U ktukLkwPsCyJuEbAjgxrxf4EEEQ9uq2FFlxNSYuKiiQMqIpFxV6KED7LCUygn4Tc kxtkp0Q+5XiqisWlQmtfExf2OjuuPqcjV9tWCDBI6GebKUbfNwY/eI44RcMu4BSv DzIlW5GkX/kZAPqnnuqaLsN3FudDTJHGEAD7NbA++7wJ076RWYSLXlFv0Z+SCSPS H8/PEG0/ZK/65rIWMAFRClJ9BNIDwGVgp0GrsIvs1gqbRUOlA1hl1rDM21TqtNFf 5QPQT7sIfTcCE/nerxKJD5JE3JyP+XRlRn96PaRw3rt4MgI6I/EOj/HOKQ5tMCNc oPiqb7N70+hkLZyr42qX+vN9eDPjp2koEQm7EO2Zs+/534/zWDs24Zfk/Aa1ps0I Fa82oGjAgkBhGe/FZ6i5cYoLcyxqRqZV1Ws9XQMl72qRC7/BwvNbIW6beLpCRyeM yYIU+0e9dEm+wHQEdh2niJuVtR63hy8tvmPx56lyh+6u0+pondkwbfSiC5aD3kAC ikKsN5DyEsdXyiBAlytCEBxnaOjQy4RAz+3YXSiS0eBNacXp03UUrNGx4Pzpu/D0 QLFJhBnMFFCgy5to8/DvKnrTPgZdSURwqbIUcZdvU21f1HLR8tUTpaQnYffc/Whm V8gnt1EL+0cc =CbJC -----END PGP SIGNATURE----- Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ... |
||
Linus Torvalds
|
1ca06f1c1a |
Xtensa updates for v6.2
- fix kernel build with gcc-13 - various minor fixes -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmOYnzsTHGpjbXZia2Jj QGdtYWlsLmNvbQAKCRBR+cyR+D+gRKoPD/4iKR+jfW6FJhPydpqDOz9OvSqo8Nz6 miw6O83e7z2vD9AEDyPwTpd6zMqwZwCgFttkTkraivEmYyNyp+c7cNHkwgJo7IEZ jTCctvSM1kLBVbblyKr+Nu/ENrSv3WFCJj8kaBdlRj1lbZm3TNRUqos1oNW1gTf7 QFjHZcOE3qTMzBNhrOl4dyCYlJJQCQPXYUUhFZ9wTPf5LfAFlJJdrqgQU/70I7J2 lVzlXsLeD8WarApSt6QvlESx6nVPlahTCS2LOWvKV2fo7+VPGDCzNUPv6mWIlYbI id3o0geu9avpv4OIKRoC5BKTnXgaAdNoFp6u9De6X64SZ8Coa59QkDnsVlsVYlyQ ExlgBVElIZ+Z4/Z6NmqgBaNmHM30kmUfBxvp0Xcn6JGWfu2dvKCT1O2YDDYCHoTS jUvec01Tnru3fTbLzyNo+59m+n7h9nOJiK4WwvJV0ac2+mHj/qOFHcSVN0HAuTEW 8wm3Wvog0x3DrXJTxOGBMCRNV1uwx6CvWuMOqh/LM7jmLJmLAu31uanhiij8a1Nt Czxnt9mte1lZhgmCXWO1vUUcbOshTglQY+KsuvGH9bJVqqI+Twe7v/nNqDl0NHAt TGWGpxD9rKD5S91jQZGy9stelStWImAbx3bxOyifYBISQU3bfkUzfOby6Dj1HECl wx9KaG9Ru8bKKw== =qcsK -----END PGP SIGNATURE----- Merge tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa Pull Xtensa updates from Max Filippov: - fix kernel build with gcc-13 - various minor fixes * tag 'xtensa-20221213' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: add __umulsidi3 helper xtensa: update config files MAINTAINERS: update the 'T:' entry for xtensa |
||
Linus Torvalds
|
4cb1fc6fff |
ARM updates for 6.2
- update unwinder to cope with module PLTs - enable UBSAN on ARM - improve kernel fault message - update UEFI runtime page tables dump - avoid clang's __aeabi_uldivmod generated in NWFPE code - disable FIQs on CPU shutdown paths - update XOR register usage - a number of build updates (using .arch, thread pointer, removal of lazy evaluation in Makefile) - conversion of stacktrace code to stackwalk - findbit assembly updates - hwcap feature updates for ARMv8 CPUs - instruction dump updates for big-endian platforms - support for function error injection -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmOYbjMACgkQ9OeQG+St rGScZw//ePQ+E/Me/p+mV6ecVpx0r3n7iM01TCqtLj2j+wSuk/VhYQLqLAaNVUR1 YeBxvpGbmigzOCERo2hUxosmloP0bTh9zelNYJCywg3yeezoV8IvfTYYY3UyTCBX mlWwm4lKyvTnfY3qXrmLCu/HxVJqyOi6IWLZFzqxAz9zS9VYX/nbUrsUzbZgpgs6 Kvcysj/jvdknbh1aMHoD/uHV7EoOKLUegmW7BXQToBMiLKIemeEoeiaD1rMGl9Ro DJiyfnUlGJkchsy+sRWKXL1GQG4jCfPNVhnBoBpAfLJgjIa9ia9wTpfsKER69pJ2 Xod2b78VusYim5SS72WU+AF53fH4HN8s1RMOiP35XazT0j+bYgv+WRUXLNwtyEYW lPBhFe4P622LjJgJlswilZ8+RWtY9Inw5Cl9xKfWbC+qwE88Bpi63FQ5lyshqUUJ anLQ+ic/6Gy8jQRWjZM6f1z5sEtESHgi631B+gJ8L4BeeaB3KozqrlYEtnMDkVRo Tz+4EO4RHV+fwUd0wj0O5ZxwKPXdFKivte++XWgogr5u/Qqhl+kzi9H+j27u4koF nvfMbz7Nf9xe4CSAiJTn7qs3f2mZWFiQNQHGtXWACAbZc7oGVPwhGXKDN44SFYAE oq7P7Hkcs+d51K8ZEL3IVC28bHejdR4pI5jNm9ECgFdG90s03+0= =1spR -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - update unwinder to cope with module PLTs - enable UBSAN on ARM - improve kernel fault message - update UEFI runtime page tables dump - avoid clang's __aeabi_uldivmod generated in NWFPE code - disable FIQs on CPU shutdown paths - update XOR register usage - a number of build updates (using .arch, thread pointer, removal of lazy evaluation in Makefile) - conversion of stacktrace code to stackwalk - findbit assembly updates - hwcap feature updates for ARMv8 CPUs - instruction dump updates for big-endian platforms - support for function error injection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits) ARM: 9279/1: support function error injection ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones ARM: 9276/1: Refactor dump_instr() ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe ARM: 9273/1: Add hwcap for Speculation Barrier(SB) ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16 ARM: 9270/1: vfp: Add hwcap for FEAT_FHM ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16 ARM: 9267/1: Define Armv8 registers in AArch32 state ARM: findbit: add unwinder information ARM: findbit: operate by words ARM: findbit: convert to macros ARM: findbit: provide more efficient ARMv7 implementation ARM: findbit: document ARMv5 bit offset calculation ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code ARM: 9265/1: pass -march= only to compiler ... |
||
Linus Torvalds
|
740afa4d39 |
- Two minor fixes to the sev-guest driver
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYkXIACgkQEsHwGGHe VUo39BAAvJ+dNS/IC/bOcPekrtDO/1OQlwhvmLzaAHVRCmV8s6ScSwtjm+IAkjS+ POaLuTiF2jk5sjT/kb0TSSgH+jts26rEU8w1u1LIjSgZMbgA/g47pfTJQTvzsL8+ bmH4naOG8ymfB/0K5/5nXoxtrIJG7uPZ/I6bABFAOt7LQoaECNfGa0LILDsD/f9R Gyl4kC560Vh/G9t3cNKgnRb11jfj2lR7UrRyqQ0/PLFtjILdKw3skw1vGEhnl+FN S+KzstMQ/6p5xRcm7HVYN8YJPwM4uGLMbfAnAPxVLx+gBIKAY2pr/rse+6JCWn5n 10sVHm1xpkMLvIl71KT9+jTKxKX9kJ35Av/ai2da3/hpcZydkVf7zP0k2sP5FTIx smTemwiJFRfrqyGmB8NY5/Bd3qRjfAb9gp+bXp12ysl1TjFAkDH4EfB5wmU2HoG8 Idlmfr5N15XQNPUVFDX8aNX91+22K3vZWbABqerpN3J6SicwNM8ZPSQ2rf1cdkqA doHsRp7523QZlj9uTOCDfif1axNQk2MzLc8O8/itGzxXGf8x5ForgI3rnNBiH2GE Yr9pJaAxl5mk8cVkU+F5GaRZ/4IXlBhXaTjU+oZ6HxL9wutilI6h2gRcKkqoseXw 66+su5ABWVuf7l18pwIu+tvo9fa9rExXmVbji8B3zxpZ2yTyS3Y= =a3Z+ -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 sev updates from Borislav Petkov: - Two minor fixes to the sev-guest driver * tag 'x86_sev_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Add a MODULE_ALIAS virt/sev-guest: Remove unnecessary free in init_crypto() |
||
Linus Torvalds
|
82c72902c5 |
- Simplify paravirt patching machinery by removing the now unused
clobber mask -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYkNQACgkQEsHwGGHe VUqflhAAnZBE/UzP499WcdjvnnQWLORfjUzAyU157U/08iMCx5qF/Qw73SrQwjIX XPWiqi0gvLS/2eDK02UylBF5reNUuATNO5wavGb0ORUKmDytcklZSzoygunByvrG fco2DXw99qQ2xhZ4fU7UbVoEek7P7nxM33dMfZjeiGldPSiRKV8pmtTG4Gmq5Ihl gEI1MLKw75oTg3t/VJqPoENv+wIBH/i2Q+oFr7E9cUoO/3T94OsKgeuCf0f+tINY YQtiFYFQGLzMEQlPnGBj+2S7usocAs80RCjvRSMMXhuC6hmoGBibw2/u25s+QmY/ yHYsmxQ+a4dEFiv/8jBAxJew/eQwiz0LSTteVS8/2cV4lhiNJHb8L2AV+xHms8Az fPTYGEX4GbykZPCemVI/y3saVbPOidGIoOUvOqML8LeQYURntgh1KleTmF5UweR+ ZMwEbXOS0Ni7wsB1Tfj/A21eGOG8dFzhszZBz8QjhtQHgckeF/JtAsNWSVRdhRyz Z0Cm1+XPftNx2eus6T7i6y9Kj8QSKszsDs+oLFvhiO8BkeJhLn9w3IQXCsDjVeZU y0Qx3VakL4MK3Im+Ah/ZM6IQQuGR3ld8x1jQJkp3FAylmznqSjYl1MoUA5MZwnwv M3yNGcLFO5uIjBfvFwBQXH28FkSS7tL9OfmtDyrEk2ITILmGqBU= =LcBv -----END PGP SIGNATURE----- Merge tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt update from Borislav Petkov: - Simplify paravirt patching machinery by removing the now unused clobber mask * tag 'x86_paravirt_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Remove clobber bitmask from .parainstructions |
||
Linus Torvalds
|
a70210f415 |
- Add support for multiple testing sequences to the Intel In-Field Scan
driver in order to be able to run multiple different test patterns. Rework things and remove the BROKEN dependency so that the driver can be enabled (Jithu Joseph) - Remove the subsys interface usage in the microcode loader because it is not really needed - A couple of smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYjh8ACgkQEsHwGGHe VUpu8xAAhY7ywLcAoG9p3AaGiXpryFwnXFBah13o1rkgkJGRaG/eVjPJ4KUUjOQs Wo3WUHeeHwmFWq+F/OSRefNsptOLBQ3u/cSza9TDDjPoS3glO5cIFc34JqIItMTg L1GMB4LfmD1+9lYpM6Td11/Dluqf7EjeEdF4qDmCRZ5i4YNsaAlM4HtgATavNkYc 6Bvsi1r7tv7tCNDAEYqEfsQLoc79Yca4W5s86HNIyrxtyk9RLrK75WvRkcpTSnK9 SEpgpYwZy4iRTtZmePC7BqqbHfV6NoeuRqIMR73FrNK9pQuauGFMPkIx08Sgl3BW /YGpefleGBHhy6Dqa6rEPsYS9xHfhqYAde09zzECJWW4VSI0PuFKyfm67ep2O7q6 zbV2DjxEZ+8kWeO9cDJPedEd8pXC8Ua7H+KNl00npdfNlkBaVR9ZRjX7ZVoiFMi8 6SRmCr1MLngldSMkUr6cYiLpoXmRzM+7gnKhVzhO6yNa0eihYBAIZ5lei0n9Q01W Soxvec2KKeSZraNLoQH0MSndEJY4sqx6lPjlXgFT6gGHzgfQZTg+9INdaPK9gbI7 tg5j1e0/1UyvWrxYxOdzThtRY1X7Y1QtdpQDcatkVOgR1uZi1CTDx1dxTrHP5jbZ 7MSKn/8/T61beG6ujjif+pC8kOwNISLNDBBZGNzeLRyx8t9/6jQ= =Z2Nu -----END PGP SIGNATURE----- Merge tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode and IFS updates from Borislav Petkov: "The IFS (In-Field Scan) stuff goes through tip because the IFS driver uses the same structures and similar functionality as the microcode loader and it made sense to route it all through this branch so that there are no conflicts. - Add support for multiple testing sequences to the Intel In-Field Scan driver in order to be able to run multiple different test patterns. Rework things and remove the BROKEN dependency so that the driver can be enabled (Jithu Joseph) - Remove the subsys interface usage in the microcode loader because it is not really needed - A couple of smaller fixes and cleanups" * tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/microcode/intel: Do not retry microcode reloading on the APs x86/microcode/intel: Do not print microcode revision and processor flags platform/x86/intel/ifs: Add missing kernel-doc entry Revert "platform/x86/intel/ifs: Mark as BROKEN" Documentation/ABI: Update IFS ABI doc platform/x86/intel/ifs: Add current_batch sysfs entry platform/x86/intel/ifs: Remove reload sysfs entry platform/x86/intel/ifs: Add metadata validation platform/x86/intel/ifs: Use generic microcode headers and functions platform/x86/intel/ifs: Add metadata support x86/microcode/intel: Use a reserved field for metasize x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check() x86/microcode/intel: Reuse microcode_sanity_check() x86/microcode/intel: Use appropriate type in microcode_sanity_check() x86/microcode/intel: Reuse find_matching_signature() platform/x86/intel/ifs: Remove memory allocation from load path platform/x86/intel/ifs: Remove image loading during init platform/x86/intel/ifs: Return a more appropriate error code platform/x86/intel/ifs: Remove unused selection x86/microcode: Drop struct ucode_cpu_info.valid ... |
||
Linus Torvalds
|
3ef3ace4e2 |
- Split MTRR and PAT init code to accomodate at least Xen PV and TDX
guests which do not get MTRRs exposed but only PAT. (TDX guests do not support the cache disabling dance when setting up MTRRs so they fall under the same category.) This is a cleanup work to remove all the ugly workarounds for such guests and init things separately (Juergen Gross) - Add two new Intel CPUs to the list of CPUs with "normal" Energy Performance Bias, leading to power savings - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern Centaur CPUs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYhIMACgkQEsHwGGHe VUpxug//ZKw3hYFroKhsULJi/e0j2nGARiSlJrJcFHl2vgh9yGvDsnYUyM/rgjgt cM3uCLbEG7nA6uhB3nupzaXZ8lBM1nU9kiEl/kjQ5oYf9nmJ48fLttvWGfxYN4s3 kj5fYVhlOZpntQXIWrwxnPqghUysumMnZmBJeKYiYNNfkj62l3xU2Ni4Gnjnp02I 9MmUhl7pj1aEyOQfM8rovy+wtYCg5WTOmXVlyVN+b9MwfYeK+stojvCZHxtJs9BD fezpJjjG+78xKUC7vVZXCh1p1N5Qvj014XJkVl9Hg0n7qizKFZRtqi8I769G2ptd exP8c2nDXKCqYzE8vK6ukWgDANQPs3d6Z7EqUKuXOCBF81PnMPSUMyNtQFGNM6Wp S5YSvFfCgUjp50IunOpvkDABgpM+PB8qeWUq72UFQJSOymzRJg/KXtE2X+qaMwtC 0i6VLXfMddGcmqNKDppfGtCjq2W5VrNIIJedtAQQGyl+pl3XzZeNomhJpm/0mVfJ 8UrlXZeXl/EUQ7qk40gC/Ash27pU9ZDx4CMNMy1jDIQqgufBjEoRIDSFqQlghmZq An5/BqMLhOMxUYNA7bRUnyeyxCBypetMdQt5ikBmVXebvBDmArXcuSNAdiy1uBFX KD8P3Y1AnsHIklxkLNyZRUy7fb4mgMFenUbgc0vmbYHbFl0C0pQ= =Zmgh -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Split MTRR and PAT init code to accomodate at least Xen PV and TDX guests which do not get MTRRs exposed but only PAT. (TDX guests do not support the cache disabling dance when setting up MTRRs so they fall under the same category) This is a cleanup work to remove all the ugly workarounds for such guests and init things separately (Juergen Gross) - Add two new Intel CPUs to the list of CPUs with "normal" Energy Performance Bias, leading to power savings - Do not do bus master arbitration in C3 (ARB_DISABLE) on modern Centaur CPUs * tag 'x86_cpu_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/mtrr: Make message for disabled MTRRs more descriptive x86/pat: Handle TDX guest PAT initialization x86/cpuid: Carve out all CPUID functionality x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area() x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack() x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode() x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h x86/acpi/cstate: Optimize ARB_DISABLE on Centaur CPUs x86/mtrr: Simplify mtrr_ops initialization x86/cacheinfo: Switch cache_ap_init() to hotplug callback x86: Decouple PAT and MTRR handling x86/mtrr: Add a stop_machine() handler calling only cache_cpu_init() x86/mtrr: Let cache_aps_delayed_init replace mtrr_aps_delayed_init x86/mtrr: Get rid of __mtrr_enabled bool x86/mtrr: Simplify mtrr_bp_init() x86/mtrr: Remove set_all callback from struct mtrr_ops x86/mtrr: Disentangle MTRR init from PAT init x86/mtrr: Move cache control code to cacheinfo.c x86/mtrr: Split MTRR-specific handling from cache dis/enabling ... |
||
Linus Torvalds
|
4eb77fa102 |
- Do some spring cleaning to the compressed boot code by moving the
EFI mixed-mode code to a separate compilation unit, the AMD memory encryption early code where it belongs and fixing up build dependencies. Make the deprecated EFI handover protocol optional with the goal of removing it at some point (Ard Biesheuvel) - Skip realmode init code on Xen PV guests as it is not needed there - Remove an old 32-bit PIC code compiler workaround -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYaiMACgkQEsHwGGHe VUrNVhAAk3lLagEsrBcQ24SnMMAyQvdKfRucn9fbs72jBCyWbDqXcE59qNgdbMS1 3rIL+EJdF8jlm5K28GjRS1WSvwUyYbyFEfUcYfqZl9L/5PAl7PlG7nNQw7/gXnw+ xS57w/Q3cONlo5LC0K2Zkbj/59RvDoBEs3nkhozkKR0npTDW/LK3Vl0zgKTkvqsV DzRIHhWsqSEvpdowbQmQCyqFh/pOoQlZkQwjYVA9+SaQYdH3Yo1dpLd5i9I9eVmJ dci/HDU+plwYYuZ1XhxwXr82PcdCUVYjJ/DTt9GkTVYq7u5EWx62puxTl+c+wbG2 H1WBXuZHBGdzNMFdnb1k9RuLCaYdaxKTNlZh3FPMMDtkjtjKTl/olXTlFUYFgI6E FPv4hi15g6pMveS3K6YUAd0uGvpsjvLUZHPqMDVS2trhxLENQALc6Id/PwqzrQ1T FzfPYcDyFFwMM3MDuWc8ClwEDD9wr0Z4m4Aek/ca2r85AKEX8ZtTTlWZoI4E9A4B hEjUFnRhT/d6XLWwZqcOIKfwtbpKAjdsCN3ElFst8ogRFAXqW8luDoI4BRCkBC4p T4RHdij4afkuFjSAxBacazpaavtcCsDqXwBpeL4YN+4fA7+NokVZGiQVh/3S8BPn LlgIf6awFq6yQq7JyEGPdk+dWn5sknldixZ55m666ZLzSvQhvE8= =VGZx -----END PGP SIGNATURE----- Merge tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Borislav Petkov: "A of early boot cleanups and fixes. - Do some spring cleaning to the compressed boot code by moving the EFI mixed-mode code to a separate compilation unit, the AMD memory encryption early code where it belongs and fixing up build dependencies. Make the deprecated EFI handover protocol optional with the goal of removing it at some point (Ard Biesheuvel) - Skip realmode init code on Xen PV guests as it is not needed there - Remove an old 32-bit PIC code compiler workaround" * tag 'x86_boot_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Remove x86_32 PIC using %ebx workaround x86/boot: Skip realmode init code when running as Xen PV guest x86/efi: Make the deprecated EFI handover protocol optional x86/boot/compressed: Only build mem_encrypt.S if AMD_MEM_ENCRYPT=y x86/boot/compressed: Adhere to calling convention in get_sev_encryption_bit() x86/boot/compressed: Move startup32_check_sev_cbit() out of head_64.S x86/boot/compressed: Move startup32_check_sev_cbit() into .text x86/boot/compressed: Move startup32_load_idt() out of head_64.S x86/boot/compressed: Move startup32_load_idt() into .text section x86/boot/compressed: Pull global variable reference into startup32_load_idt() x86/boot/compressed: Avoid touching ECX in startup32_set_idt_entry() x86/boot/compressed: Simplify IDT/GDT preserve/restore in the EFI thunk x86/boot/compressed, efi: Merge multiple definitions of image_offset into one x86/boot/compressed: Move efi32_pe_entry() out of head_64.S x86/boot/compressed: Move efi32_entry out of head_64.S x86/boot/compressed: Move efi32_pe_entry into .text section x86/boot/compressed: Move bootargs parsing out of 32-bit startup code x86/boot/compressed: Move 32-bit entrypoint code into .text section x86/boot/compressed: Rename efi_thunk_64.S to efi-mixed.S |
||
Linus Torvalds
|
8b9ed79c2d |
- Move the 32-bit memmove() asm implementation out-of-line in order to
fix a 32-bit full LTO build failure with clang where it would fail at register allocation. Move it to an asm file and clean it up while at it, similar to what has been already done on 64-bit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOYYQMACgkQEsHwGGHe VUqs3xAAvc1nsW0FiR3DWE7+k9jti8OwDMRt51n/zX9wjVrYeJM/6pLNqu+rBnLQ A18dhRMVm2QKcxh06bcth/B1V0zvYUMRaOrucjAMkBQ/XAVsEEt3ZSgklj7rYm1S phG+YhzxJWP9KdmiN29kfBj6kS9QdYYHQyca1KWxTlggWSIwlCvIzQ8k9ip8s/5W 9fxiU/P9KA8a4aEkzeQ+waytylus8Swbl19zjnmfHswCi+l2ekS9PfXDE190ec01 ePSLn2dX1bbPCIIvKD7z6gWR7BOJLpVTv2ftg4XzcozZ7ebBaaQxXczhTvUPOtG0 NOuYTz4hI+AcG5QZU8JgGbDXqS//NLIklwydfXgS1fNiwudmO62Y734mL8MV0aw7 FVy7zTXamHb0D10ES0e9tL5GLSTYs0NZ6/193PNERUEdUWj/Ix9FPbuw53DYs3gh 7BkZPRsrOJYmAtTG5fg44SMyG2MHsfsU7+3Xl0nHUKihgdZi7YdmuhLqXnhczCwe HvQFgUF3d5oRjcApYLJKHP88XnPH7o5ogIRXL1WEiZ0+SgChAzckKdVjjYrd3FLq ppnr7uZQCJaT4YoL+zqcQEQD0ukC4BfhlxmXj1IuSlpqnIXOf+JD0WOF3/twErLm g8PE+PYkm+am6TAFDDU/45/DqpEJ+vCD1SJNfRtDeS4piFV0OzQ= =hby2 -----END PGP SIGNATURE----- Merge tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Borislav Petkov: - Move the 32-bit memmove() asm implementation out-of-line in order to fix a 32-bit full LTO build failure with clang where it would fail at register allocation. Move it to an asm file and clean it up while at it, similar to what has been already done on 64-bit * tag 'x86_asm_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mem: Move memmove to out of line assembler |
||
Linus Torvalds
|
fc4c9f4504 |
EFI updates for v6.2:
- Refactor the zboot code so that it incorporates all the EFI stub logic, rather than calling the decompressed kernel as a EFI app. - Add support for initrd= command line option to x86 mixed mode. - Allow initrd= to be used with arbitrary EFI accessible file systems instead of just the one the kernel itself was loaded from. - Move some x86-only handling and manipulation of the EFI memory map into arch/x86, as it is not used anywhere else. - More flexible handling of any random seeds provided by the boot environment (i.e., systemd-boot) so that it becomes available much earlier during the boot. - Allow improved arch-agnostic EFI support in loaders, by setting a uniform baseline of supported features, and adding a generic magic number to the DOS/PE header. This should allow loaders such as GRUB or systemd-boot to reduce the amount of arch-specific handling substantially. - (arm64) Run EFI runtime services from a dedicated stack, and use it to recover from synchronous exceptions that might occur in the firmware code. - (arm64) Ensure that we don't allocate memory outside of the 48-bit addressable physical range. - Make EFI pstore record size configurable - Add support for decoding CXL specific CPER records -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmOTQ1cACgkQw08iOZLZ jyQRkAv+LqaZFWeVwhAQHiw/N3RnRM0nZHea6++D2p1y/ZbCpwv3pdLl2YHQ1KmW wDG9Nr4C1ITLtfy1YZKeYpwloQtq9S1GZDWnFpVv/hdo7L924eRAwIlxowWn1OnP ruxv2PaYXyb0plh1YD1f6E1BqrfUOtajET55Kxs9ZsxmnMtDpIX3NiYy4LKMBIZC +Eywt41M3uBX+wgmSujFBMVVJjhOX60WhUYXqy0RXwDKOyrz/oW5td+eotSCreB6 FVbjvwQvUdtzn4s1FayOMlTrkxxLw4vLhsaUGAdDOHd3rg3sZT9Xh1HqFFD6nss6 ZAzAYQ6BzdiV/5WSB9meJe+BeG1hjTNKjJI6JPO2lctzYJqlnJJzI6JzBuH9vzQ0 dffLB8NITeEW2rphIh+q+PAKFFNbXWkJtV4BMRpqmzZ/w7HwupZbUXAzbWE8/5km qlFpr0kmq8GlVcbXNOFjmnQVrJ8jPYn+O3AwmEiVAXKZJOsMH0sjlXHKsonme9oV Sk71c6Em =JEXz -----END PGP SIGNATURE----- Merge tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "Another fairly sizable pull request, by EFI subsystem standards. Most of the work was done by me, some of it in collaboration with the distro and bootloader folks (GRUB, systemd-boot), where the main focus has been on removing pointless per-arch differences in the way EFI boots a Linux kernel. - Refactor the zboot code so that it incorporates all the EFI stub logic, rather than calling the decompressed kernel as a EFI app. - Add support for initrd= command line option to x86 mixed mode. - Allow initrd= to be used with arbitrary EFI accessible file systems instead of just the one the kernel itself was loaded from. - Move some x86-only handling and manipulation of the EFI memory map into arch/x86, as it is not used anywhere else. - More flexible handling of any random seeds provided by the boot environment (i.e., systemd-boot) so that it becomes available much earlier during the boot. - Allow improved arch-agnostic EFI support in loaders, by setting a uniform baseline of supported features, and adding a generic magic number to the DOS/PE header. This should allow loaders such as GRUB or systemd-boot to reduce the amount of arch-specific handling substantially. - (arm64) Run EFI runtime services from a dedicated stack, and use it to recover from synchronous exceptions that might occur in the firmware code. - (arm64) Ensure that we don't allocate memory outside of the 48-bit addressable physical range. - Make EFI pstore record size configurable - Add support for decoding CXL specific CPER records" * tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits) arm64: efi: Recover from synchronous exceptions occurring in firmware arm64: efi: Execute runtime services from a dedicated stack arm64: efi: Limit allocations to 48-bit addressable physical region efi: Put Linux specific magic number in the DOS header efi: libstub: Always enable initrd command line loader and bump version efi: stub: use random seed from EFI variable efi: vars: prohibit reading random seed variables efi: random: combine bootloader provided RNG seed with RNG protocol output efi/cper, cxl: Decode CXL Error Log efi/cper, cxl: Decode CXL Protocol Error Section efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment efi: x86: Move EFI runtime map sysfs code to arch/x86 efi: runtime-maps: Clarify purpose and enable by default for kexec efi: pstore: Add module parameter for setting the record size efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures efi: memmap: Move manipulation routines into x86 arch tree efi: memmap: Move EFI fake memmap support into x86 arch tree efi: libstub: Undeprecate the command line initrd loader efi: libstub: Add mixed mode support to command line initrd loader efi: libstub: Permit mixed mode return types other than efi_status_t ... |
||
Linus Torvalds
|
717e6eb49b |
integrity-v6.2
-----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCY5ekGxQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5QLyAQC+olx4ImpAgFXoeYaZOiZr08ziAIlb hQ8rae6hFWecCgD/SZmDtOQ39UGobWbpj+GqwZvx8iJwKPCu9YzQ7Rjo7QE= =MywK -----END PGP SIGNATURE----- Merge tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Aside from the one cleanup, the other changes are bug fixes: Cleanup: - Include missing iMac Pro 2017 in list of Macs with T2 security chip Bug fixes: - Improper instantiation of "encrypted" keys with user provided data - Not handling delay in updating LSM label based IMA policy rules (-ESTALE) - IMA and integrity memory leaks on error paths - CONFIG_IMA_DEFAULT_HASH_SM3 hash algorithm renamed" * tag 'integrity-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix hash dependency to correct algorithm ima: Fix misuse of dereference of pointer in template_desc_init_fields() integrity: Fix memory leakage in keyring allocation error path ima: Fix memory leak in __ima_inode_hash() ima: Handle -ESTALE returned by ima_filter_rule_match() ima: Simplify ima_lsm_copy_rule ima: Fix a potential NULL pointer access in ima_restore_measurement_list efi: Add iMac Pro 2017 to uefi skip cert quirk KEYS: encrypted: fix key instantiation with user-provided data |
||
Linus Torvalds
|
8fa37a6835 |
sysctl changes for v6.2-rc1
Only step forward on the sysctl cleanups for this cycle. This has been on linux-next since September and this time it goes with a "Yeah, think so, it just moves stuff around a bit" from Peter Zijlstra. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmOYC3sSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinVEYQAL6/3nRt854jULd3zRwrWDyJZd5yxbnc R8jJBTt3q4CKwtMqd59uQqVYLpSqOCx/GsArfsXkmY4x7KYhlaSKcC4LHmFS8Z/u dofyVKumIFqtXMI+hYuTyqNqfGoK9UKXUftrqYb8pK+K3h73uqYbrDgSex4G9GJo Au0/WeDjTzLlgqt7RPN7n0PL2jMtfWVQkr3001OCQOWW9sdrOjtprn/3bDTUnW5q KukKB5saU0CvUzrTn2DaweQiRCJxQfCQfy3DZfhDRHVuWFYMV9b1okaGEoVmQlQT I9/urfdf3aLCdBBxCQG5W6uRxZwZ2Yb93M+rijZNWNFMC6WHrMCmSiADwz9LJzIK iQV7LoolGe1TFTEVJbsde5xKSF6BeId0IF5mmPQuokAx3TPE9279HNgluaB/38c8 p3P4+mP6qE12mMPyhpwDwNOzEWgUnLsGSIE5n/WPwxCiGNa7UsN2lzMDP1cJejp5 NlRg1hRKmgt30d9+t9sHeKMcWhrjxyPGsyUMwBJTuMCHbjqizGyBsB8DzyK95OoF aN66pyRqwsK0+IUivd8VfLgfriE2gDrQD5VqkJ8lfWBx9pq8RMEq7zQ1eE9IbCff hzbfG+7k9R3o4SPfJYmCBXtp6fcq+ovjbLYSvGGCJk0zfFe6SQE21rZ3hCQPq3v5 xKFh05xUfbRF =M48U -----END PGP SIGNATURE----- Merge tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "Only a small step forward on the sysctl cleanups for this cycle" * tag 'sysctl-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sched: Move numa_balancing sysctls to its own file |
||
Linus Torvalds
|
3ba2c3ff98 |
modules changes for v6.2-rc1
Tux gets for xmass improving the average lookup performance of kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which upgraded our old implementation from being O(n) to O(log(n)), while also retaining the old implementation support on /proc/kallsyms. The only penalty was increasing the memory footprint by 3 * kallsyms_num_syms. Folks who want to improve this further now also have a dedicated selftest facility through KALLSYMS_SELFTEST. Since I had to start reviewing other future kallsyms / modules enhancements by Nick Alcock (his stuff is not merged, it requires more work) I carefully reviewed and merged Zhen Lei's kallsyms changes through modules-next tree a bit less than a month ago. So this has been exposed on linux-next for about a month now with no reported regressions. Stephen Boyd added zstd in-kernel decompression support, but the only users of this would be folks using the load-pin LSM because otherwise we do module docompression in userspace. This is the newest code and was merged last week on modules-next. We spent a lot of time analyzing and coming to grips with a proper fix to an old modules regression which only recently came to light (since v5.3-rc1, May 2019) but even though I merged that fix onto modules-next last week I'm having second thoughts about it now as I was writing about that fix in this git tag message for you, as I found a few things we cannot quite justify there yet. So I'm going to push back to the drawing board again there until all i's are properly dotted. Yes, it's a regression but the issue has been there for 2 years now and it came up because of high end CPU count, it can wait a *tiny* bit more for a proper fix. The only other thing with mentioning is a minor boot time optimization by Rasmus Villemoes which deferes param_sysfs_init() to late init. The rest is cleanups and minor fixes. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmOX54cSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinFSgP/AxBdTOljYoqHnIL2/5f7PO2epSUq4Yu h42kE7aQ9qbiR9Rq2piCmD0SmeroVBIfxoMJwxnTuUy5IeujLXe6mtt7nG7Z96H1 mFxBCF63LqE/VUp/bYTusJkOPLksmhK2tCo5zMEnrRuhDAMrbFRc/S3jGm15P3/v /hdzh384Ou4cEQPQY6nsMwSvYsuNeYAhE/BqhkrQ1LDOAgSGx8DUp4db7i1/gmxG PAu7CPJEdEGljSHhG7v7PmqYYAyhyMRsW2WkCndQUvpcfZ3Q5abMFMa+9DQuT0j9 VIJtIFMZzgC+wy+1HB2hdhVcfYj1cGul0DIKugbJ9obTrIEiB8BFSaNluZroKXkU MIB/rlQCU8kkiw5CocTwM7APHPyv5sZf97oYm9MHcRE2QYYq+o4XKul3Pl2vcEB7 Cetbdxv+rUGl4Qm0U9AbXzZijwOnRu0XZShy4FTjwhipBSER93hGzYph9beSS+sb QLnDK1c6fATT9Ye95w9Oq7/4wdK5yDifRLwA57qo4oKNz4F4MhToPcIQbhLtU2IC NHWa5udylfbpNf2MnpCw0040b1hUV8atUxwZ2kBMPH/5bodXzQBKZkQEpzdPyOD8 sihPRlVmiVVXwRMxtQtFZXpb4l9Zg9YTEFMAA1ixgT1Gefh1VjAMAfOmy/hqiqBp x5CXDwftRckB =acEB -----END PGP SIGNATURE----- Merge tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: "Tux gets for xmas an improvement to the average lookup performance of kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which upgraded our old implementation from being O(n) to O(log(n)), while also retaining the old implementation support on /proc/kallsyms. The only penalty was increasing the memory footprint by 3 * kallsyms_num_syms. Folks who want to improve this further now also have a dedicated selftest facility through KALLSYMS_SELFTEST. Stephen Boyd added zstd in-kernel decompression support, but the only users of this would be folks using the load-pin LSM because otherwise we do module decompression in userspace. The only other thing with mentioning is a minor boot time optimization by Rasmus Villemoes which deferes param_sysfs_init() to late init. The rest is cleanups and minor fixes" * tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication module/decompress: Support zstd in-kernel decompression kallsyms: Remove unneeded semicolon kallsyms: Add self-test facility livepatch: Use kallsyms_on_each_match_symbol() to improve performance kallsyms: Add helper kallsyms_on_each_match_symbol() kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[] kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y kallsyms: Improve the performance of kallsyms_lookup_name() scripts/kallsyms: rename build_initial_tok_table() module: Fix NULL vs IS_ERR checking for module_get_next_page kernel/params.c: defer most of param_sysfs_init() to late_initcall time module: Remove unused macros module_addr_min/max module: remove redundant module_sysfs_initialized variable |
||
Linus Torvalds
|
0015edd6f6 |
A pile of clk driver updates with a small tracepoint patch to the clk core this
time around. The core framework is effectively unchanged, with the majority of the diff going to the Qualcomm clk driver directory because they added two 3k line files that are almost all clk data (Abel Vesa from Linaro tried to shrink the number of lines down, but it doesn't seem to be possible without sacrificing readability). The second big driver this time around is the Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines. Ignoring the big clk drivers from the familiar SoC vendors, there's just a bunch of little clk driver updates and fixes throughout here. It's the usual set of clk data fixups to describe proper parents, or add frequencies to frequency tables, or plug memory leaks when function calls fail. Also, some drivers are converted to use modern clk_hw APIs, which is always nice to see. And data is deduplicated, leading to a smaller kernel Image. Overall this batch has a larger collection of cleanups than it typically does. Maybe that means there are less new SoCs right now that need supporting, and the focus has shifted to quality and reliability. I can dream. New Drivers: - Frequency hopping controller hardware on MediaTek MT8186 - Global clock controller for Qualcomm SM8550 - Display clock controller for Qualcomm SC8280XP - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs - CPU PLL on MStar/SigmaStar SoCs - Support for the clock and reset unit of the Rockchip rk3588 Updates: - Tracepoints for clk_rate_request structures - Debugfs support for fractional divider clk - Make MxL's CGU driver secure compatible - Ingenic JZ4755 SoC clk support - Support audio clks on X1000 SoCs - Remove flags from univ/main/syspll child fixed factor clocks across MediaTek platforms - Fix clock dependency for ADC on MediaTek MT7986 - Fix parent for FlexSPI clock for i.MX93 - Add USB suspend clock on i.MX8MP - Unmap anatop base on error for i.MX93 driver - Change enet clock parent to wakeup_axi_root for i.MX93 - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93 - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93 - Add 320MHz and 640MHz entries to PLL146x - Add audio shared gate and SAI clocks for i.MX8MP - Fix a possible memory leak in the error path of rockchip PLL creation - Fix header guard for V3S clocks - Add IR module clock for f1c100s - Correct the parent clocks for the (High Speed) Serial Communication Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet Switch clocks on Renesas R-Car S4-8 - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas R-Car V4H - Two PLL driver fixups for the Amlogic clk driver - Round SD clock rate to improve parent clock selection - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car S4-8 - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4H - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on Renesas RZ/G2L - Fix endless loop on Renesas RZ/N1 - Correct the parent clocks for the High Speed Serial Communication Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC Note: HSCIF0 is used for the serial console on the White-Hawk development board - Various clk DT binding improvements and conversions to YAML - Qualcomm SM8150/SM8250 display clock controller cleaned up - Some missing clocks for Qualcomm SM8350 added - Qualcomm MSM8974 Global and Multimedia clock controllers transitioned to parent_data and parent_hws - Use parent_data and add network resets for Qualcomm IPQ8074 - Qualcomm Krait clock controller modernized - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock controllers - Enable retention mode on Qualcomm SM8250 USB GDSCs - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating clocks which definition could be shared between platforms - Various NULL pointer checks added for allocations -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmOXq7wRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSU2sg/+JIguM/vYw92d3hGePFKaz5lmFXSjzRXp HMbbnuclAzc/C7jKGwypP2GMdVxOPvzxG4cW9Q25cTw4SuELg2nIBn9UvRteCEDA uGf8h0Xw/sJfyRhZbAlnbLxtn3qntQL8F2VbPJ+umDYnghD0Mq0WBMeHEoeXGXpb PVdEYsgpHo3EbgCL8rjErw9XDHBTGRgNXPounpKjD3Kwmj+CXWgopsma7Hzf2G/6 VxBbcxDZA6OaEzJAKGVeIHBYLwY0aGPP2ouC2RQDBzSb7n6PjqDkOCdP6w1ab9Nl XehAup5p5Zgd314YgQlE9BoXwhXanZyVT88D6WbfN+qjksDm9n+W+5O9suN2eLrt h+YgmFdUAESUAJTbIyF6tiLUEIDKjKrJyU+HZX0peOhGIYbw3fMUACR+JrCbmCCZ rTTOWh92q7v39to+QIFsKwtVLl9IlRTCaA3tbhv/FH2gplJlOhvPgulAfV+JRtTZ 1YND5adsFNsc69ZK8TTT2NzXUnU0XhocNNL1SegYXZpfHoNmg5CUQiPYMMASCJcI V1+qznLUeUUonkhexFTMrJHGL4e4ITzESi7IOTVcJ6Wco+gXOrOMHfONbahEsCYn UQIPC9tw9qwV6D3Sf9C8zFtBP26w7+UuJ8ZFpmhpf+fevF5i2TsG6x7Y31mlxzww OZ+r5dsauc4= =6vbl -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver updates from Stephen Boyd: "A pile of clk driver updates with a small tracepoint patch to the clk core this time around. The core framework is effectively unchanged, with the majority of the diff going to the Qualcomm clk driver directory because they added two 3k line files that are almost all clk data (Abel Vesa from Linaro tried to shrink the number of lines down, but it doesn't seem to be possible without sacrificing readability). The second big driver this time around is the Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines. Ignoring the big clk drivers from the familiar SoC vendors, there's just a bunch of little clk driver updates and fixes throughout here. It's the usual set of clk data fixups to describe proper parents, or add frequencies to frequency tables, or plug memory leaks when function calls fail. Also, some drivers are converted to use modern clk_hw APIs, which is always nice to see. And data is deduplicated, leading to a smaller kernel Image. Overall this batch has a larger collection of cleanups than it typically does. Maybe that means there are less new SoCs right now that need supporting, and the focus has shifted to quality and reliability. I can dream. New Drivers: - Frequency hopping controller hardware on MediaTek MT8186 - Global clock controller for Qualcomm SM8550 - Display clock controller for Qualcomm SC8280XP - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs - CPU PLL on MStar/SigmaStar SoCs - Support for the clock and reset unit of the Rockchip rk3588 Updates: - Tracepoints for clk_rate_request structures - Debugfs support for fractional divider clk - Make MxL's CGU driver secure compatible - Ingenic JZ4755 SoC clk support - Support audio clks on X1000 SoCs - Remove flags from univ/main/syspll child fixed factor clocks across MediaTek platforms - Fix clock dependency for ADC on MediaTek MT7986 - Fix parent for FlexSPI clock for i.MX93 - Add USB suspend clock on i.MX8MP - Unmap anatop base on error for i.MX93 driver - Change enet clock parent to wakeup_axi_root for i.MX93 - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93 - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93 - Add 320MHz and 640MHz entries to PLL146x - Add audio shared gate and SAI clocks for i.MX8MP - Fix a possible memory leak in the error path of rockchip PLL creation - Fix header guard for V3S clocks - Add IR module clock for f1c100s - Correct the parent clocks for the (High Speed) Serial Communication Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet Switch clocks on Renesas R-Car S4-8 - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas R-Car V4H - Two PLL driver fixups for the Amlogic clk driver - Round SD clock rate to improve parent clock selection - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car S4-8 - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4H - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on Renesas RZ/G2L - Fix endless loop on Renesas RZ/N1 - Correct the parent clocks for the High Speed Serial Communication Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC Note: HSCIF0 is used for the serial console on the White-Hawk development board - Various clk DT binding improvements and conversions to YAML - Qualcomm SM8150/SM8250 display clock controller cleaned up - Some missing clocks for Qualcomm SM8350 added - Qualcomm MSM8974 Global and Multimedia clock controllers transitioned to parent_data and parent_hws - Use parent_data and add network resets for Qualcomm IPQ8074 - Qualcomm Krait clock controller modernized - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock controllers - Enable retention mode on Qualcomm SM8250 USB GDSCs - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating clocks which definition could be shared between platforms - Various NULL pointer checks added for allocations" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits) clk: nomadik: correct struct name kernel-doc warning clk: lmk04832: fix kernel-doc warnings clk: lmk04832: drop superfluous #include clk: lmk04832: drop unnecessary semicolons clk: lmk04832: declare variables as const when possible clk: socfpga: Fix memory leak in socfpga_gate_init() clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: st: Fix memory leak in st_of_quadfs_setup() clk: samsung: Fix memory leak in _samsung_clk_register_pll() clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file ... |
||
Linus Torvalds
|
71946a25f3 |
MMC core:
- A few minor improvements and cleanups MMC host: - Remove some redundant calls to local_irq_{save,restore}() - Replace kmap_atomic() with kmap_local_page() - Take return values from mmc_add_host() into account - dw_mmc-pltfm: Add support to configure clk-phase for socfpga - hsq: Minimize latency by using a fifo to dispatch requests - litex_mmc: Fixup corner case for polling mode - mtk-sd: Add inline crypto engine clock control - mtk-sd: Add support for the mediatek MT7986 variant - renesas_sdhi: Improve reset from HS400 mode - renesas_sdhi: Take DMA end interrupts into account - sdhci: Avoid unnecessary update of clock - sdhci: Fix an SD tuning issue - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver - sdhci-esdhc-imx: Improve tuning logic - sdhci-esdhc-imx: Improve support for the imxrt1050 variant - sdhci_f_sdh30: Add support for non-removable media - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant - sdhci_f_sdh30: Add reset control support - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants - sdhci-msm: Add support for the Qcom MSM8976 variant - sdhci-of-arasan: Add support for dynamic configuration - sdhci-of-esdhc: Limit the clock frequency to confirm to spec - sdhci-pci: Enable asynchronous probe - sdhci-sprd: Improve card detection - sdhci-tegra: Improve reset support - sdhci-tegra: Add support to program MC stream ID - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller - vub300: Fix warning splat for SDIO irq MEMSTICK core: - memstick: A few minor improvements and cleanups CLK/IOMMU: - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk - iommu: Add tegra specific helper to get stream_id -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmOYUeUXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnUmA//cdC4gF86ROp+d2lKZVHn9FVK jgF0NJ9DZiDOZm7qta7rqmAGo/Xq9sacHq65qGjXMeei/MNrwu7xW/U3Ihk0pK9z Gnphck3JgbkLJ6ijxsuBqNavsYjXJVqys3f2qThXYh+xXyLAfIvOtPj9984EfdvR AtZuTwpvebNxB6Qu6SFIYZ4Yt4ZaTN/AuCRyjS9HHNLugjbgditZQcw6wjqlTRb7 fhSNwK3srWGzdthtiiXBoFSjjpd7AESGPjqaGDJNgIDYxFXOUX2vx2eb15s1beVN i7pN8D83StNjF+PF551trUyNCaW4Ukbl7hHTqC9sFvjgtRFVB97oSoxm7F03fsX3 bM6USXtG1xOGkPG9Dqneuhee157UCgNIWs46H/CuZYmGgBN6I7l0Jt3+Lru5IwwQ NstKcLS6xaWyYOEAoAR5yFDJXBagxEXNArtHkzoLabvcsk0XPdGAMd87RUuyGgXt Vpd4VjH1VSDcaG7DF3+XR3uTy5mUAOrehBrVr1eKH7gYRpr4TLlYgE/a3AkSs/m+ 3ftM3o6hraHKqwY32vDG9vSsuLrGdh286rEypmc1gmejiNTz+SFSIex1YoefWtx2 O0u+7plcauuUX+7EQ79RzZkB/FS40uL3wxAii7Ta+on4P7Cwuh6jo1Hakvy5JjtW 5733RKV5nkKUkKMOwsU= =nstz -----END PGP SIGNATURE----- Merge tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - A few minor improvements and cleanups MMC host: - Remove some redundant calls to local_irq_{save,restore}() - Replace kmap_atomic() with kmap_local_page() - Take return values from mmc_add_host() into account - dw_mmc-pltfm: Add support to configure clk-phase for socfpga - hsq: Minimize latency by using a fifo to dispatch requests - litex_mmc: Fixup corner case for polling mode - mtk-sd: Add inline crypto engine clock control - mtk-sd: Add support for the mediatek MT7986 variant - renesas_sdhi: Improve reset from HS400 mode - renesas_sdhi: Take DMA end interrupts into account - sdhci: Avoid unnecessary update of clock - sdhci: Fix an SD tuning issue - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver - sdhci-esdhc-imx: Improve tuning logic - sdhci-esdhc-imx: Improve support for the imxrt1050 variant - sdhci_f_sdh30: Add support for non-removable media - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant - sdhci_f_sdh30: Add reset control support - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants - sdhci-msm: Add support for the Qcom MSM8976 variant - sdhci-of-arasan: Add support for dynamic configuration - sdhci-of-esdhc: Limit the clock frequency to confirm to spec - sdhci-pci: Enable asynchronous probe - sdhci-sprd: Improve card detection - sdhci-tegra: Improve reset support - sdhci-tegra: Add support to program MC stream ID - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller - vub300: Fix warning splat for SDIO irq MEMSTICK core: - memstick: A few minor improvements and cleanups CLK/IOMMU: - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk - iommu: Add tegra specific helper to get stream_id" * tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits) mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K mmc: sdhci-of-esdhc: Modify mismatched function name memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs mmc: sdhci-tegra: Issue CMD and DAT resets together mmc: sdhci-tegra: Add support to program MC stream ID mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data mmc: sdhci-tegra: Sort includes alphabetically iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper iommu: Add note about struct iommu_fwspec usage mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n dt-bindings: mmc: sdhci-msm: allow dma-coherent dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC dt-bindings: mmc: sdhci-msm: cleanup style dt-bindings: mmc: sdhci-am654: cleanup style dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver mmc: sdhci-of-esdhc: limit the SDHC clock frequency mmc: sdhci: Remove unneeded semicolon mmc: core: Normalize the error handling branch in sd_read_ext_regs() ... |
||
Linus Torvalds
|
90b12f423d |
Small fixes, a new SSIF i2c BMC-side interface
This includes a number of small fixes, as usual. It also includes a new driver for doing the i2c (SSIF) interface BMC-side, pretty much completing the BMC side interfaces. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmOYieoACgkQYfOMkJGb /4EF6A//UX1SL+OT+NOvFYxr6etcKoY6VGZDlEUbUbUAYFE/vv/aFP2aXr+eHf/o Y+hx3WLE5kveoxVcGfkJMRVYiHbC/4d+Z4CLd1PzXx6Tjp20Abpr8uGCZIyy0263 /gYl+JPmSRXslA46mPImMlTzL/vzsHjoOHVpLCVcv8iDbXKhvqlNEJ2Y8BbNy299 vNkix6MVDmTCD+PR5LE10myL0X53suHJoAN6CbjmRgIgxFb/tfddtFRIjqb/W8Dk JssgYGd+xFHWV/65xnOGbGDWuciBIQSkFL7fWyZpp0OooPJJRL/Hi/l3VVMC1GTA y38E+0as+OzQcaHKcG9hnzFWhVtewJYFHL2TZrAv3IbFWjiJwDq7jguraOl5uTAB vzIt0ML34oWF4PR/ZYva3aZID5xmNKYMRVHp9cxzNmUKd4XcHfwzKD2C9eVVG5W9 qQ+7a+L7mC6PwOCE5t+P/Plh0lC9V8eDAVTf4pfXH/vp0o5oreMaJtDKGnCqvyZR raU/rmyS8TNYv8iZMItGL8U1h8trYIMVA1SuEzQICpPKd7yITcKuSPIYXLThGUx8 4XWu8iMfaPcHzeCNtOwrRxXjQ8AeRTGPPkKf25pvvM9ETODyUIUsuMYSE9kNlQjP zFCyDbcMPxVx+WD6YptukbY8pNftCiT8wrFbriV8BMDDGMDq5HM= =HTb4 -----END PGP SIGNATURE----- Merge tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "This includes a number of small fixes, as usual. It also includes a new driver for doing the i2c (SSIF) interface BMC-side, pretty much completing the BMC side interfaces" * tag 'for-linus-6.2-1' of https://github.com/cminyard/linux-ipmi: ipmi/watchdog: use strscpy() to instead of strncpy() ipmi: ssif_bmc: Convert to i2c's .probe_new() ipmi: fix use after free in _ipmi_destroy_user() ipmi/watchdog: Include <linux/kstrtox.h> when appropriate ipmi:ssif: Increase the message retry time ipmi: Fix some kernel-doc warnings ipmi: ssif_bmc: Use EPOLLIN instead of POLLIN ipmi: fix msg stack when IPMI is disconnected ipmi: fix memleak when unload ipmi driver ipmi: fix long wait in unload when IPMI disconnect ipmi: kcs: Poll OBF briefly to reduce OBE latency bindings: ipmi: Add binding for SSIF BMC driver ipmi: ssif_bmc: Add SSIF BMC driver |
||
Linus Torvalds
|
2043f9a37d |
for-linus-2022121301
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAY5iCHqZi849r7WBJAQKEhRAAqy2xfeg/DSGDhQItEWggL0H+2dPK7KWD Rw0ZimOVdRdMENGyoDxyFQ3VFd0/FJBVF7AtALs32zW40S/eAwuds81sklMsr6D1 9LDalDlkCCyBKDSdNfPTEVgnIhJPiSuHX7HjJdoPUXdiRzEf+TxKaEQuGuhVbizw cfKChyKI/o173glvGVkzmA1iqCFPY+/tM6HJCHxxL51wko47wJZ9eubdZoxFpDU7 mHyqyJYrcjaFh7iPOda77WAIT6gqQFJi9pbH5SBP5Hs/yZPvkw9OZQLrCGx8Zehe Trdh0GTBXo67D0UBHiOafqQSj9CqDunBLBOOD4uf5K9CfzIBhyHS7C2rtrY85Lz2 6/WevKgZ0MuLma87DcDkb2nNEnjQbV8OPcD10qk7k2yDl8SezoOiS+g7rOTo42P1 80zt68znsEQCJBAqG3X8x+bU767r73FIJlFSERvRz1j0N05EpScIs5NR9cRK/iGB 1oAxj0H04jOR0K+1mHhPWxIQpE2ypHOLhYlR9RROWbvM9ilJpaCaESHTZYMv83U/ QuZR4ytH9uqqUIsweK9ExUiu3RK5YEC/H/GuFSORYFl40jB/iRmbRGTKiLNOGraH oYE/sIWYUtsPCOLFeIPGG8pd5I9spImlRUkSqBfx803I9SQPG/rx4q7rcol6YOlS FwnRlMSGz0Y= =KkQc -----END PGP SIGNATURE----- Merge tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - iio support for the MCP2221 HID driver (Matt Ranostay) - support for more than one hinge sensor in hid-sensor-custom (Yauhen Kharuzhy) - PS DualShock 4 controller support (Roderick Colenbrander) - XP-PEN Deco LW support (José Expósito) - other assorted code cleanups and device ID/quirk addtions * tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (51 commits) HID: logitech HID++: Send SwID in GetProtocolVersion HID: hid-elan: use default remove for hid device HID: hid-alps: use default remove for hid device HID: hid-sensor-custom: set fixed size for custom attributes HID: i2c: let RMI devices decide what constitutes wakeup event HID: playstation: fix DualShock4 bluetooth CRC endian issue. HID: playstation: fix DualShock4 bluetooth memory corruption bug. HID: apple: Swap Control and Command keys on Apple keyboards HID: intel-ish-hid: ishtp: remove variable rb_count HID: uclogic: Standardize test name prefix HID: hid-sensor-custom: Allow more than one hinge angle sensor HID: ft260: fix 'cast to restricted' kernel CI bot warnings HID: ft260: missed NACK from busy device HID: ft260: fix a NULL pointer dereference in ft260_i2c_write HID: ft260: wake up device from power saving mode HID: ft260: missed NACK from big i2c read HID: ft260: remove SMBus Quick command support HID: ft260: skip unexpected HID input reports HID: ft260: do not populate /dev/hidraw device HID: ft260: improve i2c large reads performance ... |
||
Linus Torvalds
|
86a0b4255e |
Input updates for 6.2 merge window:
- a new driver for Cypress Generation 5 touchscreens - a new driver for Hynitron cstxxx touchscreens - a new driver for Himax hx83112b touchscreen - I2C input devices have been converted to use i2c's probe_new() - a large number of input devices are now using DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use __maybe_unused annotations - improvements to msg2638 touchscreen driver to also support msg2138 - conversion of several input deevine bindings to yaml/DT schema - changes to select touch drivers to move handling of wake irqs to the PM core - other assorted fixes and improvements. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY5d+9wAKCRBAj56VGEWX nN9CAP9R1zCdPc5Y2PmLnE6JHc9XynPhUnVbnx4zHieMxw0nHQD/ZnHot+Cdq/+L 433dkdX50pwK3XxRQgjRaym+efgwfQ0= =9m4z -----END PGP SIGNATURE----- Merge tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Cypress Generation 5 touchscreens - a new driver for Hynitron cstxxx touchscreens - a new driver for Himax hx83112b touchscreen - I2C input devices have been converted to use i2c's probe_new() - a large number of input devices are now using DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use __maybe_unused annotations - improvements to msg2638 touchscreen driver to also support msg2138 - conversion of several input deevine bindings to yaml/DT schema - changes to select touch drivers to move handling of wake irqs to the PM core - other assorted fixes and improvements. * tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits) Input: elants_i2c - delay longer with reset asserted dt-bindings: input: Convert ti,drv260x to DT schema dt-bindings: input: gpio-beeper: Convert to yaml schema Input: pxspad - fix unused data warning when force feedback not enabled Input: lpc32xx - allow building with COMPILE_TEST Input: nomadik-ske-keypad - allow building with COMPILE_TEST Input: pxa27xx-keypad - allow build with COMPILE_TEST Input: spear-keyboard - improve build coverage using COMPILE_TEST Input: tegra-kbc - allow build with COMPILE_TEST Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() ... |