It was found that qed_pglueb_rbc_attn_handler() can produce a lot of
false-positive error detections on driver load/reload (especially after
crashes/recoveries) and spam the kernel log:
[ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0
[ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[...]
Reduce the logging level of two false-positive prone error messages from
notice to verbose on initialization (only) to not mix it with real error
attentions while debugging.
Fixes: 666db4862f ("qed: Revise load sequence to avoid PCI errors")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the verbosity of the "don't support RoCE & iWARP simultaneously"
warning to debug level to stop flooding on driver/hardware initialization:
[ 4.783230] qede 01:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth0]
[ 4.810020] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 4.861186] qede 01:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth1]
[ 4.893311] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.181713] qede a1:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth2]
[ 5.224740] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.276449] qede a1:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth3]
[ 5.318671] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.369548] qede a1:00.02: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth4]
[ 5.411645] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
Fixes: e0a8f9de16 ("qed: Add iWARP enablement support")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the nsim_create(), rtnl_lock() is called before nsim_bpf_init().
If nsim_bpf_init() is failed, rtnl_unlock() should be called,
but it isn't called.
So, unbalanced locking would occur.
Fixes: e05b2d141f ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing "ip link set dev ... up" for a ksz9477 backed link,
ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove
1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is
called. Doing so reverts any previous change to advertised link modes
e.g. using a udevd .link file.
phy_remove_link_mode is not meant to be used while opening a link and
should be called during phy probe when the link is not yet available to
userspace.
Therefore move the phy_remove_link_mode calls into
ksz9477_switch_register. It indirectly calls dsa_register_switch, which
creates the relevant struct phy_devices and we update the link modes
right after that. At that time dev->features is already initialized by
ksz9477_switch_detect.
Remove phy_setup from ksz_dev_ops as no users remain.
Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/
Fixes: 42fc6a4c61 ("net: dsa: microchip: prepare PHY for proper advertisement")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: fixes for -net
There are some bugfixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, PF queries the MAC link status per second by calling
function hclge_get_mac_link_status(). It return the error code
when failed to send cmdq command to firmware. It's incorrect,
because this return value is used as the MAC link status, which
0 means link down, and none-zero means link up. So fixes it.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The content of the TX desc is automatically cleared by the HW
when the HW has sent out the packet to the wire. When desc filling
fails in hns3_nic_net_xmit(), it will call hns3_clear_desc() to do
the error handling, which miss zeroing of the TX desc and the
checking if a unmapping is needed.
So add the zeroing and checking in hns3_clear_desc() to avoid the
above problem. Also add DESC_TYPE_UNKNOWN to indicate the info in
desc_cb is not valid, because hns3_nic_reclaim_desc() may treat
the desc_cb->type of zero as packet and add to the sent pkt
statistics accordingly.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With GRO and fraglist support, the SKB can be aggregated to
a total size of 65535, and when that SKB is forwarded through
a bridge, the size of the SKB may be pushed to exceed the size
of 65535 when br_dev_queue_push_xmit() is called.
The max send size of BD supported by the HW is 65535, when a SKB
with a headlen of over 65535 is sent to the driver, the driver
needs to use multi BD to send the linear data, and the send size
of the last BD is calculated incorrectly by the driver who is
using '&' operation, which causes a TX error.
Use '%' operation to fix this problem.
Fixes: 3fe13ed95d ("net: hns3: avoid mult + div op in critical data path")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a big TX buffer is sent using multi BD, the driver maps the
whole TX buffer, and unmaps it using info in desc_cb corresponding
to each BD, but only the info in the desc_cb of first BD is correct,
other info in desc_cb is wrong, which causes TX unmapping problem
when SMMU is on.
Only set the mapping and freeing info in the desc_cb of first BD to
fix this problem, because the TX buffer only need to be unmapped and
freed once.
Fixes: 1e8a7977d09f("net: hns3: add handling for big TX fragment")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huzhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.
Fixes: b2bf1e2659 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.
[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima says:
====================
udp: Fix reuseport selection with connected sockets.
This patch set addresses two issues which happen when both connected and
unconnected sockets are in the same UDP reuseport group.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.
Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load
balancing.
The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result
---------------------------------------------
0 | no | 20% | 40%
1 | no | 20% | 20%
2 | yes | 20% | 0%
3 | no | 20% | 40%
4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still
works better than now.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.
However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.
Here is the sequence laid out in greater detail:
CPU0 CPU1
down_write sb->s_umount
btrfs_kill_super
kill_anon_super(sb)
generic_shutdown_super(sb);
shrink_dcache_for_umount(sb);
sync_filesystem(sb);
evict_inodes(sb); // SLOW
btrfs_mount_root
btrfs_scan_one_device
fs_devices = device->fs_devices
fs_info->fs_devices = fs_devices
// fs_devices-opened makes this a no-op
btrfs_open_devices(fs_devices, mode, fs_type)
s = sget(fs_type, test, set, flags, fs_info);
find sb in s_instances
grab_super(sb);
down_write(&s->s_umount); // blocks
sop->put_super(sb)
// sb->fs_devices->opened == 2; no-op
spin_lock(&sb_lock);
hlist_del_init(&sb->s_instances);
spin_unlock(&sb_lock);
up_write(&sb->s_umount);
return 0;
retry lookup
don't find sb in s_instances (deleted by CPU0)
s = alloc_super
return s;
btrfs_fill_super(s, fs_devices, data)
open_ctree // fs_devices total_rw_bytes improperly set!
btrfs_read_chunk_tree
read_one_dev // increment total_rw_bytes again!!
super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!
To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.
To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.
for i in $(seq 0 500)
do
dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
done
umount /mnt/foo&
mount /mnt/foo
does the trick for me.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When locking pages for delalloc, we check if it's dirty and mapping still
matches. If it does not match, we need to return -EAGAIN and release all
pages. Only the current page was put though, iterate over all the
remaining pages too.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running tests like generic/013 on test device with btrfs quota
enabled, it can normally lead to data leak, detected at unmount time:
BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096
------------[ cut here ]------------
WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
Call Trace:
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
__prepare_exit_to_usermode+0x1bc/0x1c0
__syscall_return_slowpath+0x47/0x230
do_syscall_64+0x64/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace caf08beafeca2392 ]---
BTRFS error (device dm-3): qgroup reserved space leaked
[CAUSE]
In the offending case, the offending operations are:
2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0
2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0
The following sequence of events could happen after the writev():
CPU1 (writeback) | CPU2 (truncate)
-----------------------------------------------------------------
btrfs_writepages() |
|- extent_write_cache_pages() |
|- Got page for 1003520 |
| 1003520 is Dirty, no writeback |
| So (!clear_page_dirty_for_io()) |
| gets called for it |
|- Now page 1003520 is Clean. |
| | btrfs_setattr()
| | |- btrfs_setsize()
| | |- truncate_setsize()
| | New i_size is 18388
|- __extent_writepage() |
| |- page_offset() > i_size |
|- btrfs_invalidatepage() |
|- Page is clean, so no qgroup |
callback executed
This means, the qgroup reserved data space is not properly released in
btrfs_invalidatepage() as the page is Clean.
[FIX]
Instead of checking the dirty bit of a page, call
btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage().
As qgroup rsv are completely bound to the QGROUP_RESERVED bit of
io_tree, not bound to page status, thus we won't cause double freeing
anyway.
Fixes: 0b34c261e2 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes: ac7822b002 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 7b668c064e ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.
Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064e ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.
A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.
Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com
Fixes: 7b668c064e ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: stable <stable@vger.kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct tty_port is part of the uart state and will never be NULL in
the receive helpers. Drop the bogus NULL checks and rename the
pointer-variables "port" to differentiate them from struct tty_struct
pointers (which can be NULL).
Fixes: 962963e4ee ("serial: tegra: Switch to using struct tty_port")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200710135947.2737-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 33ae787b74 ("serial: tegra: add support to ignore read") added
support for dropping input in case CREAD isn't set, but for PIO the
ignore_status_mask wasn't checked until after the character had been
put in the receive buffer.
Note that the NULL tty-port test is bogus and will be removed by a
follow-on patch.
Fixes: 33ae787b74 ("serial: tegra: add support to ignore read")
Cc: stable <stable@vger.kernel.org> # 5.4
Cc: Shardar Shariff Md <smohammed@nvidia.com>
Cc: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200710135947.2737-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when reading of the device property for "qcom,tx-deamp_3_5db"
fails the default is being assigned incorrectly to phy_dwc3->rx_eq. This
looks like a copy-n-paste error and in fact should be assigning the
default instead to phy_dwc3->tx_deamp_3_5db
Addresses-Coverity: ("Copy-paste error")
Fixes: ef19b117b8 ("phy: qualcomm: add qcom ipq806x dwc usb phy driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200721150613.416876-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The mvneta hardware appears to lock up in various random ways when
repeatedly switching speeds between 1G and 2.5G, which involves
reprogramming the COMPHY. It is not entirely clear why this happens,
but best guess is that reprogramming the COMPHY glitches mvneta clocks
causing the hardware to fail. It seems that rebooting resolves the
failure, but not down/up cycling the interface alone.
Various other approaches have been tried, such as trying to cleanly
power down the COMPHY and then take it back through the power up
initialisation, but this does not seem to help.
It was finally noticed that u-boot's last step when configuring a
COMPHY for "SGMII" mode was to poke at a register described as
"GBE_CONFIGURATION_REG", which is undocumented in any external
documentation. All that we have is the fact that u-boot sets a bit
corresponding to the "SGMII" lane at the end of COMPHY initialisation.
Experimentation shows that if we clear this bit prior to changing the
speed, and then set it afterwards, mvneta does not suffer this problem
on the SolidRun Clearfog when switching speeds between 1G and 2.5G.
This problem was found while script-testing phylink.
This fix also requires the corresponding change to DT to be effective.
See "ARM: dts: armada-38x: fix NETA lockup when repeatedly switching
speeds".
Fixes: 14dc100b44 ("phy: armada38x: add common phy support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1jxtRj-0003Tz-CG@rmk-PC.armlinux.org.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the Marvell Armada 38x COMPHY binding with an additional
optional register pair describing the location of an undocumented
system register controlling something to do with the Gigabit Ethernet
and COMPHY. There is one bit for each COMPHY lane that may be using
the serdes, but exactly what this register does is completely unknown.
This register only appears to exist on Armada 38x devices, and not
other SoCs using the NETA ethernet block, so it seems logical that it
should be part of the COMPHY.
This is also how u-boot groups this register; it is dealt with as part
of the COMPHY initialisation there.
However, at the end of the day, due to the undocumented nature of this
register, we can only guess.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/E1jxtRZ-0003Ta-4h@rmk-PC.armlinux.org.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run
concurrently with destruction of the implicit MR. The num_deferred_work
was intended to serialize this, but there is a race:
CPU0 CPU1
mlx5_ib_free_implicit_mr()
xa_erase(odp_mkeys)
synchronize_srcu()
__xa_erase(implicit_children)
mlx5_ib_prefetch_mr_work()
pagefault_mr()
pagefault_implicit_mr()
implicit_get_child_mr()
xa_cmpxchg()
atomic_dec_and_test(num_deferred_mr)
wait_event(imr->q_deferred_work)
ib_umem_odp_release(odp_imr)
kfree(odp_imr)
At this point in mlx5_ib_free_implicit_mr() the implicit_children list is
supposed to be empty forever so that destroy_unused_implicit_child_mr()
and related are not and will not be running.
Since it is not empty the destroy_unused_implicit_child_mr() flow ends up
touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the
imr parent.
The solution is to flush out the prefetch wq by driving num_deferred_work
to zero after creation of new prefetch work is blocked.
Fixes: 5256edcb98 ("RDMA/mlx5: Rework implicit ODP destroy")
Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The problems started with the revert (18cc7ac8a2). The
cdns_uart_console.index is statically assigned -1. When the port is
registered, Linux assigns consecutive numbers to it. It turned out that
when using ttyPS1 as console, the index is not updated as we are reusing
the same cdns_uart_console instance for multiple ports. When registering
ttyPS0, it gets updated from -1 to 0, but when registering ttyPS1, it
already is 0 and not updated.
That led to 2ae11c46d5. It assigns the index prior to registering
the uart_driver once. Unfortunately, that ended up breaking the
situation where the probe order does not match the id order. When using
the same device tree for both uboot and linux, it is important that the
serial0 alias points to the console. So some boards reverse those
aliases. This was reported by Jan Kiszka. The proposed fix was reverting
the index assignment and going back to the previous iteration.
However such a reversed assignement (serial0 -> uart1, serial1 -> uart0)
was already partially broken by the revert (18cc7ac8a2). While the
ttyPS device works, the kmsg connection is already broken and kernel
messages go missing. Reverting the id assignment does not fix this.
>From the xilinx_uartps driver pov (after reverting the refactoring
commits), there can be only one console. This manifests in static
variables console_pprt and cdns_uart_console. These variables are not
properly linked and can go out of sync. The cdns_uart_console.index is
important for uart_add_one_port. We call that function for each port -
one of which hopefully is the console. If it isn't, the CON_ENABLED flag
is not set and console_port is cleared. The next cdns_uart_probe call
then tries to register the next port using that same cdns_uart_console.
It is important that console_port and cdns_uart_console (and its index
in particular) stay in sync. The index assignment implemented by
Shubhrajyoti Datta is correct in principle. It just may have to happen a
second time if the first cdns_uart_probe call didn't encounter the
console device. And we shouldn't change the index once the console uart
is registered.
Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Link: https://lore.kernel.org/linux-serial/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com/
Fixes: 18cc7ac8a2 ("Revert "serial: uartps: Register own uart console and driver structures"")
Fixes: 2ae11c46d5 ("tty: xilinx_uartps: Fix missing id assignment to the console")
Fixes: 76ed2e1057 ("Revert "tty: xilinx_uartps: Fix missing id assignment to the console"")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200713073227.GA3805@laureti-dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting general protection fault in do_con_write() [1] caused
by vc->vc_screenbuf == ZERO_SIZE_PTR caused by vc->vc_screenbuf_size == 0
caused by vc->vc_cols == vc->vc_rows == vc->vc_size_row == 0 caused by
fb_set_var() from ioctl(FBIOPUT_VSCREENINFO) on /dev/fb0 , for
gotoxy(vc, 0, 0) from reset_terminal() from vc_init() from vc_allocate()
from con_install() from tty_init_dev() from tty_open() on such console
causes vc->vc_pos == 0x10000000e due to
((unsigned long) ZERO_SIZE_PTR) + -1U * 0 + (-1U << 1).
I don't think that a console with 0 column or 0 row makes sense. And it
seems that vc_do_resize() does not intend to allow resizing a console to
0 column or 0 row due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception.
Theoretically, cols and rows can be any range as long as
0 < cols * rows * 2 <= KMALLOC_MAX_SIZE is satisfied (e.g.
cols == 1048576 && rows == 2 is possible) because of
vc->vc_size_row = vc->vc_cols << 1;
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
in visual_init() and kzalloc(vc->vc_screenbuf_size) in vc_allocate().
Since we can detect cols == 0 or rows == 0 via screenbuf_size = 0 in
visual_init(), we can reject kzalloc(0). Then, vc_allocate() will return
an error, and con_write() will not be called on a console with 0 column
or 0 row.
We need to make sure that integer overflow in visual_init() won't happen.
Since vc_do_resize() restricts cols <= 32767 and rows <= 32767, applying
1 <= cols <= 32767 and 1 <= rows <= 32767 restrictions to vc_allocate()
will be practically fine.
This patch does not touch con_init(), for returning -EINVAL there
does not help when we are not returning -ENOMEM.
[1] https://syzkaller.appspot.com/bug?extid=017265e8553724e514e8
Reported-and-tested-by: syzbot <syzbot+017265e8553724e514e8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200712111013.11881-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8W9DAACgkQqDIjiipP
6E9HUwf+Of/ePXWAO59IGMsiRdh+yYawc7blshVxtuw9vgfFfXSUXWyoAO8WH6zS
VOzmlDoze+jdG4VKAr0elFOkXAHjdgfwsVoLAU1aJz1r/rcpt3j8oc8JPKTxck7I
Yq5L9+I/36sULZt7Pa8VaendoswbrKDbHtQFqQaT+h2LtCdK2kEeRp44Xr3fqIPc
fuHAzetjWJ20Iy7YRkI3jzL9DAcoXZWdctSoC8FYEWtP7RaGVZVnxBPyaoiGFVJc
WnZApwxW6Ju03Uav6ypy7fP5A3utFi119pRuyadQYCJT1n9NlzZMmCA+fCCx09+Y
fvuXIayg6bj7++YD1zLPPFn4rgTY/g==
=vRtM
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.8-rc7' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull a timer chip fix from Daniel Lezcano:
- Fix kernel panic at suspend / resume time on TI am3/am4 (Tony Lindgren)
Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
IAOQ[0]: d_alloc_parallel+0x384/0x688
IAOQ[1]: d_alloc_parallel+0x388/0x688
RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
[<000000004036974c>] __lookup_slow+0xa4/0x200
[<0000000040369fc8>] walk_component+0x288/0x458
[<000000004036a9a0>] path_lookupat+0x88/0x198
[<000000004036e748>] filename_lookup+0xa0/0x168
[<000000004036e95c>] user_path_at_empty+0x64/0x80
[<000000004035d93c>] vfs_statx+0x104/0x158
[<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
[<000000004035e5a0>] sys_lstat64+0x20/0x38
[<0000000040180054>] syscall_exit+0x0/0x14
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0
4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
This PR became fairly large, containing mostly the collection of
ASoC fixes that slipped from the previous request, so I sent now
a bit earlier than usual. But all changes look small and mostly
device-specific, hence nothing to worry too much.
Majority of changes are for x86 based platforms and their CODEC
drivers, in order to address some issues hit by their recent tests
and fuzzing. The rest are other ASoC device-specific fixes (imx,
qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel
WARNING hit by syzkaller.
-----BEGIN PGP SIGNATURE-----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=iAZG
-----END PGP SIGNATURE-----
Merge tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into master
Pull sound fixes from Takashi Iwai:
"This became fairly large, containing mostly the collection of ASoC
fixes that slipped from the previous request, so I sent now a bit
earlier than usual. But all changes look small and mostly
device-specific, hence nothing to worry too much.
Majority of changes are for x86 based platforms and their CODEC
drivers, in order to address some issues hit by their recent tests and
fuzzing. The rest are other ASoC device-specific fixes (imx, qcom,
wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING
hit by syzkaller"
* tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ASoC: rt5682: Report the button event in the headset type only
ASoC: Intel: bytcht_es8316: Add missed put_device()
ASoC: rt5682: Enable Vref2 under using PLL2
ASoC: rt286: fix unexpected interrupt happens
ASoC: wm8974: remove unsupported clock mode
ASoC: wm8974: fix Boost Mixer Aux Switch
ASoC: SOF: core: fix null-ptr-deref bug during device removal
ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend
ASoC: codecs: max98373: Removed superfluous volume control from chip default
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: fix kernel oops on route addition error
ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M
ASoC: Intel: bdw-rt5677: fix non BE conversion
ASoC: soc-dai: set dai_link dpcm_ flags with a helper
MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl
ASoC: core: Remove only the registered component in devm functions
MAINTAINERS: Change Maintainer for some at91 drivers
ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings
...
The ETM state save/restore incorrectly reads/writes some of the 64bit
registers (e.g, address comparators, vmid/cid comparators etc.) using
32bit accesses. Ensure we use the appropriate width accessors for
the registers.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-18-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add default sink selection to the perf trace handling in the etm driver.
Uses the select default sink infrastructure to select a sink for the perf
session, if no other sink is specified.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An additional sink subtype is added to differentiate ETB/ETF buffer
sinks and ETR type system memory sinks.
This allows the prioritised selection of default sinks.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a shutdown callback to ensure ETR hardware is
properly shutdown in reboot/shutdown path. This is required
for ETR which has SMMU address translation enabled like on
SC7180 SoC and few others. If the hardware is still accessing
memory after SMMU translation is disabled as part of SMMU
shutdown callback in system reboot or shutdown path, then
IOVAs(I/O virtual address) which it was using will go on the
bus as the physical addresses which might result in unknown
crashes (NoC/interconnect errors). So we make sure from this
shutdown callback that the ETR is shutdown before SMMU translation
is disabled and device_link in SMMU driver will take care of
ordering of shutdown callbacks such that SMMU shutdown callback
is not called before any of its consumer shutdown callbacks.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comment for an elemnt in the coresight_device structure appears to have
been corrupted and makes no sense. Fix this before making further changes.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter value registers change during operation, however this change
is not reflected in the values seen by the user in sysfs.
This fixes the issue by reading back the values on disable.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETMv4 max resource selector constant incorrectly set to 16. Updated to the
correct 32 value, and adjustments made to limited code using it.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an optional boolean property "qcom,replicator-loses-context" to
identify replicators which loses context when AMBA clocks are removed
in certain configurable replicator designs.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some QCOM SoCs, replicators in Always-On domain loses its
context as soon as the clock is disabled. Currently as a part
of pm_runtime workqueue, clock is disabled after the replicator
is initialized by amba_pm_runtime_suspend assuming that context
is not lost which is not true for replicators with such
limitations. So add a new property "qcom,replicator-loses-context"
to identify such replicators and reset them.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "qcom,skip-power-up" property to identify systems which can
skip powering up of trace unit since they share the same power
domain as their CPU core. This is required to identify such
systems with hardware errata which stops the CPU watchdog counter
when the power up bit is set (TRCPDCR.PU).
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
