Commit Graph

1763 Commits

Author SHA1 Message Date
Stephen Hemminger
7ceb1c3753 Drivers: hv: vmbus: add numa_node to sysfs
Being able to find the numa_node for a device is useful for userspace
drivers (DPDK) and also for diagnosing performance issues.  This makes
vmbus similar to pci.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-29 08:09:56 +02:00
Xiao Guangrong
857a26222f fpga: dfl: afu: add afu sub feature support
User Accelerated Function Unit sub feature exposes the MMIO region of
the AFU. After valid PR bitstream is programmed and the port is enabled,
then this MMIO region could be accessed.

This patch adds support to enumerate the AFU MMIO region and expose it
to userspace via mmap file operation. Below interfaces are exposed to user:

Sysfs interface:
* /sys/class/fpga_region/<regionX>/<dfl-port.x>/afu_id
  Read-only. Indicate which PR bitstream is programmed to this AFU.

Ioctl interfaces:
* DFL_FPGA_PORT_GET_INFO
  Provide info to userspace on the number of supported region.
  Only UAFU region is supported now.

* DFL_FPGA_PORT_GET_REGION_INFO
  Provide region information, including access permission, region size,
  offset from the start of device fd.

Signed-off-by: Tim Whisonant <tim.whisonant@intel.com>
Signed-off-by: Enno Luebbers <enno.luebbers@intel.com>
Signed-off-by: Shiva Rao <shiva.rao@intel.com>
Signed-off-by: Christopher Rauer <christopher.rauer@intel.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:55:47 +02:00
Wu Hao
e4664c0ee4 fpga: dfl: afu: add header sub feature support
The port header register set is always present for port, it is mainly
for capability, control and status of the ports that AFU connected to.

This patch implements header sub feature support. Below user interfaces
are created by this patch.

Sysfs interface:
* /sys/class/fpga_region/<regionX>/<dfl-port.x>/id
  Read-only. Port ID.

Ioctl interface:
* DFL_FPGA_PORT_RESET
  Reset the FPGA Port and its AFU.

Signed-off-by: Tim Whisonant <tim.whisonant@intel.com>
Signed-off-by: Enno Luebbers <enno.luebbers@intel.com>
Signed-off-by: Shiva Rao <shiva.rao@intel.com>
Signed-off-by: Christopher Rauer <christopher.rauer@intel.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:55:47 +02:00
Kang Luwei
0a27ff24d5 fpga: dfl: fme: add header sub feature support
The Header Register set is always present for FPGA Management Engine (FME),
this patch implements init and uinit function for header sub feature and
introduces several read-only sysfs interfaces for the capability and
status.

Sysfs interfaces:
* /sys/class/fpga_region/<regionX>/<dfl-fme.x>/ports_num
  Read-only. Number of ports implemented

* /sys/class/fpga_region/<regionX>/<dfl-fme.x>/bitstream_id
  Read-only. Bitstream (static FPGA region) identifier number. It contains
  the detailed version and other information of this static FPGA region.

* /sys/class/fpga_region/<regionX>/<dfl-fme.x>/bitstream_metadata
  Read-only. Bitstream (static FPGA region) meta data. It contains the
  synthesis date, seed and other information of this static FPGA region.

Signed-off-by: Tim Whisonant <tim.whisonant@intel.com>
Signed-off-by: Enno Luebbers <enno.luebbers@intel.com>
Signed-off-by: Shiva Rao <shiva.rao@intel.com>
Signed-off-by: Christopher Rauer <christopher.rauer@intel.com>
Signed-off-by: Kang Luwei <luwei.kang@intel.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:55:46 +02:00
Wu Hao
41a8b2c564 fpga: region: add compat_id support
This patch introduces a compat_id pointer member and sysfs interface
for each fpga region, similar as compat_id for fpga manager, it allows
applications to read the per region compat_id for compatibility
checking before other actions on this fpga-region (e.g. PR).

Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:55:44 +02:00
Wu Hao
ecb5fbe299 fpga: mgr: add status for fpga-manager
This patch adds status sysfs interface for fpga manager, it's a
read only interface which allows user to get fpga manager status,
including full/partial reconfiguration error and other status
information. It adds a status callback to fpga_manager_ops too,
allows each fpga_manager driver to define its own method to
collect latest status from hardware.

The following sysfs file is created:
* /sys/class/fpga_manager/<fpga>/status
  Return status of fpga manager, including reconfiguration errors.

Signed-off-by: Wu Hao <hao.wu@intel.com>
Acked-by: Alan Tull <atull@kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:55:44 +02:00
Suzuki K Poulose
c34cc23f1d coresight: tmc: Add configuration support for trace buffer size
Now that we can dynamically switch between contiguous memory and
SG table depending on the trace buffer size, provide the support
for selecting an appropriate buffer size.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 13:52:57 +02:00
Alexander Usyskin
3cfaeb3353 mei: expose fw version to sysfs
The ME FW version is constantly used by detection and update tools.
To improve the reliability and simplify these tools provide
a sysfs interface to access version of the platform ME firmware
in the following format:
<platform>:<major>.<minor>.<milestone>.<build>.
There can be up to three such blocks for different FW components.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03 13:11:20 +02:00
Johan Hovold
10f146639f gnss: add receiver type support
Add a "type" device attribute and a "GNSS_TYPE" uevent variable which
can be used to determine the type of a GNSS receiver. The currently
identified types reflect the protocol(s) supported by a receiver:

	"NMEA"	NMEA 0183
	"SiRF"	SiRF Binary
	"UBX"	UBX

Note that both SiRF and UBX type receivers typically support a subset of
NMEA 0183 with vendor extensions (e.g. to allow switching to the vendor
protocol).

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28 20:32:51 +09:00
Mauro Carvalho Chehab
6ec71b205d ABI: sysfs-devices-system-cpu: remove a broken reference
This file doesn't exist anymore:
	Documentation/cpu-freq/user-guide.txt

As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Mauro Carvalho Chehab
ec15872daa docs: fix broken references with multiple hints
The script:
	./scripts/documentation-file-ref-check --fix

Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Linus Torvalds
f3b5020e16 platform-drivers-x86 for v4.18-1
Several incremental improvements including new keycodes, new models, new
 quirks, and related documentation. Adds LED platform driver activation
 for Mellanox systems.  Some minor optimizations and cleanups. Includes
 several bug fixes, message silencing, mostly minor.
 
 The following commits were previously merged during the 4.17 RC cycle:
  - 06b8b00b33 platform/x86: asus-wireless: Fix NULL pointer dereference
  - 6ed66c3ce0 platform/x86: Kconfig: Fix dell-laptop dependency chain.
  - 74783c99bf platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
  - cf48bf9eee platform/x86: asus-wmi: Fix NULL pointer dereference
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  add another KEY_POWER keycode
 
 apple-gmux:
  -  fix gmux_get_client_id()'s return type
 
 asus-laptop:
  -  Simplify getting .drvdata
 
 asus-wireless:
  -  Fix format specifier
 
 dell-laptop:
  -  Fix keyboard backlight timeout on XPS 13 9370
 
 dell-smbios:
  -  Match on www.dell.com in OEM strings too
 
 dell-wmi:
  -  Ignore new rfkill and fn-lock events
  -  Set correct keycode for Fn + left arrow
 
 fujitsu-laptop:
  -  Simplify soft key handling
 
 ideapad-laptop:
  -  Add E42-80 to no_hw_rfkill
  -  Add fn-lock setting
  -  Add MIIX 720-12IKB to no_hw_rfkill
 
 lib/string_helpers:
  -  Add missed declaration of struct task_struct
 
 intel_scu_ipc:
  -  Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
 
 mlx-platform:
  -  Add LED platform driver activation
 
 platform/mellanox:
  -  Add new ODM system types to mlx-platform
  -  mlxreg-hotplug: add extra cycle for hotplug work queue
  -  mlxreg-hotplug: Document fixes for hotplug private data
 
 platform_data/mlxreg:
  -  Document fixes for hotplug device
 
 silead_dmi:
  -  Add entry for Chuwi Hi8 tablet touchscreen
  -  Add touchscreen info for the Onda V891w tablet
  -  Add info for the PoV mobii TAB-P800W (v2.0)
  -  Add touchscreen info for the Jumper EZpad 6 Pro
 
 thinkpad_acpi:
  -  silence false-positive-prone pr_warn
  -  do not report thermal sensor state for tablet mode switch
  -  silence HKEY 0x6032, 0x60f0, 0x6030
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbIFzqAAoJEKbMaAwKp3644JcIAJ8iBMobacNWjIJvPJ8ytwLE
 NUP7/W/8NUXkwnxXzURorlnoO6Uj4+54c+QfO+HQV/+Y46fJaX9x2tWRtcEkpJU3
 L6c59kYAMlu5rN5ekCcQex4FKL8Pd7q6QpF8KZtP8gw2ujUEeGA1m/qcTmUlkOQF
 AFfbSFJtmMOinbL5ufkaW7Gu91EVFhuvgIoK/XdOhwAbyYAPEbtttKlUjkZGx6GU
 iJbpimcmdtfXBqMzvpOHw/4EUXLwgDVr1F8PdGmvEHyK45SHIZcK936Ihiq+CjVA
 USFKZhMMYU4sifI77pIP9Trftm+FdaLnPumGVj836OMp1+k10YBy1hDIGwI6i68=
 =+O74
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Several incremental improvements including new keycodes, new models,
  new quirks, and related documentation. Adds LED platform driver
  activation for Mellanox systems. Some minor optimizations and
  cleanups. Includes several bug fixes, message silencing, mostly minor

  Automated summary:

  acer-wmi:
   -  add another KEY_POWER keycode

  apple-gmux:
   -  fix gmux_get_client_id()'s return type

  asus-laptop:
   -  Simplify getting .drvdata

  asus-wireless:
   -  Fix format specifier

  dell-laptop:
   -  Fix keyboard backlight timeout on XPS 13 9370

  dell-smbios:
   -  Match on www.dell.com in OEM strings too

  dell-wmi:
   -  Ignore new rfkill and fn-lock events
   -  Set correct keycode for Fn + left arrow

  fujitsu-laptop:
   -  Simplify soft key handling

  ideapad-laptop:
   -  Add E42-80 to no_hw_rfkill
   -  Add fn-lock setting
   -  Add MIIX 720-12IKB to no_hw_rfkill

  lib/string_helpers:
   -  Add missed declaration of struct task_struct

  intel_scu_ipc:
   -  Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl

  mlx-platform:
   -  Add LED platform driver activation

  platform/mellanox:
   -  Add new ODM system types to mlx-platform
   -  mlxreg-hotplug: add extra cycle for hotplug work queue
   -  mlxreg-hotplug: Document fixes for hotplug private data

  platform_data/mlxreg:
   -  Document fixes for hotplug device

  silead_dmi:
   -  Add entry for Chuwi Hi8 tablet touchscreen
   -  Add touchscreen info for the Onda V891w tablet
   -  Add info for the PoV mobii TAB-P800W (v2.0)
   -  Add touchscreen info for the Jumper EZpad 6 Pro

  thinkpad_acpi:
   -  silence false-positive-prone pr_warn
   -  do not report thermal sensor state for tablet mode switch
   -  silence HKEY 0x6032, 0x60f0, 0x6030"

* tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86: (30 commits)
  platform/x86: silead_dmi: Add entry for Chuwi Hi8 tablet touchscreen
  platform/x86: dell-laptop: Fix keyboard backlight timeout on XPS 13 9370
  platform/x86: dell-wmi: Ignore new rfkill and fn-lock events
  platform/x86: mlx-platform: Add LED platform driver activation
  platform/mellanox: Add new ODM system types to mlx-platform
  platform/mellanox: mlxreg-hotplug: add extra cycle for hotplug work queue
  platform/x86: ideapad-laptop: Add E42-80 to no_hw_rfkill
  platform/x86: silead_dmi: Add touchscreen info for the Onda V891w tablet
  platform/x86: silead_dmi: Add info for the PoV mobii TAB-P800W (v2.0)
  platform/x86: silead_dmi: Add touchscreen info for the Jumper EZpad 6 Pro
  platform/x86: asus-wireless: Fix format specifier
  platform/x86: asus-wmi: Fix NULL pointer dereference
  platform/x86: dell-wmi: Set correct keycode for Fn + left arrow
  platform/x86: acer-wmi: add another KEY_POWER keycode
  platform/x86: ideapad-laptop: Add fn-lock setting
  platform/x86: ideapad-laptop: Add MIIX 720-12IKB to no_hw_rfkill
  lib/string_helpers: Add missed declaration of struct task_struct
  platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
  platform/mellanox: mlxreg-hotplug: Document fixes for hotplug private data
  platform_data/mlxreg: Document fixes for hotplug device
  ...
2018-06-14 16:30:30 +09:00
Linus Torvalds
f7cca14bce rpmsg updates for v4.18
This migrates rpmsg to use SPDX license headers and fixes a
 use-after-free in SMD.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAlsevT4bHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FBREP/1EuBVx80l+zg8gby5aV
 r7xJxSiUOmwla/L8w4M7fUVsfQdvPoFBo/g4SYCpW2fxM8Xm3lzeme5R3Upp1YhE
 rVCAKAwM5lGzQvqYTVMF/0e8TBGAa9KDKCW4XF3A5UKFxjZanQ51ZFgcYEpLPFBt
 5V3Zx/xQkjwS6upu1O6oGnw5gf33UUZq5T97N9snMMrumTzyJwd7LiBbcVZOE9HH
 yAJcWw291yOz5dtG8ZWca4vfBoGIU26nXVe+Zvxsj1BesEw6mkdm4swutnmGswKE
 me1HZ637dxQ34QqXKSh/3K5fMFLu+VHXnMs5LcNpo0DpDzD51r5tGk3MMLJunWST
 jo4SRJotTKGhzY1HOP+hoohjhnrzh14Q5XMMfRh10W4rzJMz59IMngtyYuc9+r2F
 A+aK6Nf9C2QoAcf5dZoz0jsFUyXiRW9N6Yu6pWlSS2LekN1EyTxEBJM7311W3Z29
 qTckOYOuLWYTx8nWsT9KYxzE4EqJIx3D14pDoNVkxgnGmHnIKczKGfB7TKixheDN
 l9cNZQqKw+eG7OEiHwsdUe0cvL800WVhnLKH9DsO8Rz6BS/9CIx49X1fOT4bKLuU
 9ru3i0KrEobilGkzx8whB0d0vGSIgcnrJr82nfNQwdoRWEalNBzOwdrYVrN+CN1a
 CWiwLHi1Vfd5ubeLPVKUe6db
 =8SM9
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg-v4.18' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
 "This migrates rpmsg to use SPDX license headers and fixes a
  use-after-free in SMD"

* tag 'rpmsg-v4.18' of git://github.com/andersson/remoteproc:
  rpmsg: smd: do not use mananged resources for endpoints and channels
  rpmsg: char: Switch to SPDX license identifier
  rpmsg: glink: Switch to SPDX license identifier
  rpmsg: smd: Switch to SPDX license identifier
  rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifier
  rpmsg: Switch to SPDX license identifier
  rpmsg: qcom_smd: Access APCS through mailbox framework
  rpmsg: Add driver_override device attribute for rpmsg_device
2018-06-11 12:13:55 -07:00
Linus Torvalds
d54d35c501 f2fs-for-4.18-rc1
In this round, we've mainly focused on discard, aka unmap, control along with
 fstrim for Android-specific usage model. In addition, we've fixed writepage flow
 which returned EAGAIN previously resulting in EIO of fsync(2) due to mapping's
 error state. In order to avoid old MM bug [1], we decided not to use __GFP_ZERO
 for the mapping for node and meta page caches. As always, we've cleaned up many
 places for future fsverity and symbol conflicts.
 
 Enhancement:
  - do discard/fstrim in lower priority considering fs utilization
  - split large discard commands into smaller ones for better responsiveness
  - add more sanity checks to address syzbot reports
  - add a mount option, fsync_mode=nobarrier, which can reduce # of cache flushes
  - clean up symbol namespace with modified function names
  - be strict on block allocation and IO control in corner cases
 
 Bug fix:
  - don't use __GFP_ZERO for mappings
  - fix error reports in writepage to avoid fsync() failure
  - avoid selinux denial on CAP_RESOURCE on resgid/resuid
  - fix some subtle race conditions in GC/atomic writes/shutdown
  - fix overflow bugs in sanity_check_raw_super
  - fix missing bits on get_flags
 
 Clean-up:
  - prepare the generic flow for future fsverity integration
  - fix some broken coding standard
 
 [1] https://lkml.org/lkml/2018/4/8/661
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAlsepb8ACgkQQBSofoJI
 UNJdSw/+IhrYJFkJEN/pV4M5xSjYirl/P2WJ4AGi6HcpjEGmaDiBi2whod1Jw2NE
 1auSMiby7K91VAmPvxMmmLhOdC8XgJ8jwY1nEaZMfmMXohlaD3FDY5bzYf5rJDF4
 J184P6xUZ2IKlFVA4prwNQgYi3awPthVu1lxbFPp8GUHDbmr5ZXEysxPDzz2O0Em
 oE7WmklmyCHJPhmg/EcVXfF/Ekf3zMOVR+EI2otcDjnWIQioVetIK8CKi0MM4bkG
 X8Z318ANjGTd42woupXIzsiTrMRONY7zzkUvE+S6tfUjKZoIdofDM5OIXMdOxpxL
 DZ53WrwfeB74igD8jDZgqD6OaonIfDfCuKrwUASFAC2Ou4h3apj3ckUzoHtAhEUL
 z5yTSKTrtfuoSufhBp+nKKs3ijDgms76arw8x/pPdN6D6xDwIJtBPxC2sObPaj35
 damv4GyM4+sbhGO/Gbie2q6za55IvYFZc7JNCC2D2K5tnBmUaa7/XdvxcyigniGk
 AZgkaddHePkAZpa5AYYirZR8bd7IFds0+m6VcybG0/pYb0qPEcI6U4mujBSCIwVy
 kXuD7su3jNjj6hWnCl5PSQo8yBWS5H8c6/o+5XHozzYA91dsLAmD8entuCreg6Hp
 NaIFio0qKULweLK86f66qQTsRPMpYRAtqPS0Ew0+3llKMcrlRp4=
 =JrW7
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've mainly focused on discard, aka unmap, control
  along with fstrim for Android-specific usage model. In addition, we've
  fixed writepage flow which returned EAGAIN previously resulting in EIO
  of fsync(2) due to mapping's error state. In order to avoid old MM bug
  [1], we decided not to use __GFP_ZERO for the mapping for node and
  meta page caches. As always, we've cleaned up many places for future
  fsverity and symbol conflicts.

  Enhancements:
   - do discard/fstrim in lower priority considering fs utilization
   - split large discard commands into smaller ones for better responsiveness
   - add more sanity checks to address syzbot reports
   - add a mount option, fsync_mode=nobarrier, which can reduce # of cache flushes
   - clean up symbol namespace with modified function names
   - be strict on block allocation and IO control in corner cases

  Bug fixes:
   - don't use __GFP_ZERO for mappings
   - fix error reports in writepage to avoid fsync() failure
   - avoid selinux denial on CAP_RESOURCE on resgid/resuid
   - fix some subtle race conditions in GC/atomic writes/shutdown
   - fix overflow bugs in sanity_check_raw_super
   - fix missing bits on get_flags

  Clean-ups:
   - prepare the generic flow for future fsverity integration
   - fix some broken coding standard"

[1] https://lkml.org/lkml/2018/4/8/661

* tag 'f2fs-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (79 commits)
  f2fs: fix to clear FI_VOLATILE_FILE correctly
  f2fs: let sync node IO interrupt async one
  f2fs: don't change wbc->sync_mode
  f2fs: fix to update mtime correctly
  fs: f2fs: insert space around that ':' and ', '
  fs: f2fs: add missing blank lines after declarations
  fs: f2fs: changed variable type of offset "unsigned" to "loff_t"
  f2fs: clean up symbol namespace
  f2fs: make set_de_type() static
  f2fs: make __f2fs_write_data_pages() static
  f2fs: fix to avoid accessing cross the boundary
  f2fs: fix to let caller retry allocating block address
  disable loading f2fs module on PAGE_SIZE > 4KB
  f2fs: fix error path of move_data_page
  f2fs: don't drop dentry pages after fs shutdown
  f2fs: fix to avoid race during access gc_thread pointer
  f2fs: clean up with clear_radix_tree_dirty_tag
  f2fs: fix to don't trigger writeback during recovery
  f2fs: clear discard_wake earlier
  f2fs: let discard thread wait a little longer if dev is busy
  ...
2018-06-11 10:16:13 -07:00
Linus Torvalds
eafdca4d70 Staging/IIO patches for 4.18-rc1
Here is the big staging and IIO driver update for 4.18-rc1.
 
 It was delayed as I wanted to make sure the final driver deletions did
 not cause any major merge issues, and all now looks good.
 
 There are a lot of patches here, just over 1000.  The diffstat summary
 shows the major changes here:
 	1007 files changed, 16828 insertions(+), 227770 deletions(-)
 Because of this, we might be close to shrinking the overall kernel
 source code size for two releases in a row.
 
 There was loads of work in this release cycle, primarily:
 	- tons of ks7010 driver cleanups
 	- lots of mt7621 driver fixes and cleanups
 	- most driver cleanups
 	- wilc1000 fixes and cleanups
 	- lots and lots of IIO driver cleanups and new additions
 	- debugfs cleanups for all staging drivers
 	- lots of other staging driver cleanups and fixes, the shortlog
 	  has the full details.
 
 but the big user-visable things here are the removal of 3 chunks of
 code:
 	- ncpfs and ipx were removed on schedule, no one has cared about
 	  this code since it moved to staging last year, and if it needs
 	  to come back, it can be reverted.
 	- lustre file system is removed.  I've ranted at the lustre
 	  developers about once a year for the past 5 years, with no
 	  real forward progress at all to clean things up and get the
 	  code into the "real" part of the kernel.  Given that the
 	  lustre developers continue to work on an external tree and try
 	  to port those changes to the in-kernel tree every once in a
 	  while, this whole thing really really is not working out at
 	  all.  So I'm deleting it so that the developers can spend the
 	  time working in their out-of-tree location and get things
 	  cleaned up properly to get merged into the tree correctly at a
 	  later date.
 
 Because of these file removals, you will have merge issues on some of
 these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
 atomisp driver).  Just delete those files, it's a simple merge :)
 
 All of this has been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxvjGQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymoEwCbBYnyUl3cwCszIJ3L3/zvUWpmqIgAn1DDsAim
 dM4lmKg6HX/JBSV4GAN0
 =zdta
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.18-rc1.

  It was delayed as I wanted to make sure the final driver deletions did
  not cause any major merge issues, and all now looks good.

  There are a lot of patches here, just over 1000. The diffstat summary
  shows the major changes here:

	1007 files changed, 16828 insertions(+), 227770 deletions(-)

  Because of this, we might be close to shrinking the overall kernel
  source code size for two releases in a row.

  There was loads of work in this release cycle, primarily:

   - tons of ks7010 driver cleanups

   - lots of mt7621 driver fixes and cleanups

   - most driver cleanups

   - wilc1000 fixes and cleanups

   - lots and lots of IIO driver cleanups and new additions

   - debugfs cleanups for all staging drivers

   - lots of other staging driver cleanups and fixes, the shortlog has
     the full details.

  but the big user-visable things here are the removal of 3 chunks of
  code:

   - ncpfs and ipx were removed on schedule, no one has cared about this
     code since it moved to staging last year, and if it needs to come
     back, it can be reverted.

   - lustre file system is removed.

     I've ranted at the lustre developers about once a year for the past
     5 years, with no real forward progress at all to clean things up
     and get the code into the "real" part of the kernel.

     Given that the lustre developers continue to work on an external
     tree and try to port those changes to the in-kernel tree every once
     in a while, this whole thing really really is not working out at
     all. So I'm deleting it so that the developers can spend the time
     working in their out-of-tree location and get things cleaned up
     properly to get merged into the tree correctly at a later date.

  Because of these file removals, you will have merge issues on some of
  these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the
  atomisp driver). Just delete those files, it's a simple merge :)

  All of this has been in linux-next for a while with no reported
  problems"

* tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits)
  staging: ipx: delete it from the tree
  ncpfs: remove uapi .h files
  ncpfs: remove Documentation
  ncpfs: remove compat functionality
  staging: ncpfs: delete it
  staging: lustre: delete the filesystem from the tree.
  staging: vc04_services: no need to save the log debufs dentries
  staging: vc04_services: vchiq_debugfs_log_entry can be a void *
  staging: vc04_services: remove struct vchiq_debugfs_info
  staging: vc04_services: move client dbg directory into static variable
  staging: vc04_services: remove odd vchiq_debugfs_top() wrapper
  staging: vc04_services: no need to check debugfs return values
  staging: mt7621-gpio: reorder includes alphabetically
  staging: mt7621-gpio: change gc_map to don't use pointers
  staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values
  staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return
  staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property
  staging: mt7621-gpio: update #interrupt-cells for the gpio node
  staging: mt7621-gpio: dt-bindings: complete documentation for the gpio
  staging: mt7621-dts: add missing properties to gpio node
  ...
2018-06-09 10:32:39 -07:00
Linus Torvalds
7d3bf613e9 libnvdimm for 4.18
* DAX broke a fundamental assumption of truncate of file mapped pages.
   The truncate path assumed that it is safe to disconnect a pinned page
   from a file and let the filesystem reclaim the physical block. With DAX
   the page is equivalent to the filesystem block. Introduce
   dax_layout_busy_page() to enable filesystems to wait for pinned DAX
   pages to be released. Without this wait a filesystem could allocate
   blocks under active device-DMA to a new file.
 
 * DAX arranges for the block layer to be bypassed and uses
   dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
   However, the memcpy_mcsafe() facility is available through the pmem
   block driver. In order to safely handle media errors, via the DAX
   block-layer bypass, introduce copy_to_iter_mcsafe().
 
 * Fix cache management policy relative to the ACPI NFIT Platform
   Capabilities Structure to properly elide cache flushes when they are not
   necessary. The table indicates whether CPU caches are power-fail
   protected. Clarify that a deep flush is always performed on
   REQ_{FUA,PREFLUSH} requests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbGxI7AAoJEB7SkWpmfYgCDjsP/2Lcibu9Kf4tKIzuInsle6iE
 6qP29qlkpHVTpDKbhvIxTYTYL9sMU0DNUrpPCJR/EYdeyztLWDFC5EAT1wF240vf
 maV37s/uP331jSC/2VJnKWzBs2ztQxmKLEIQCxh6aT0qs9cbaOvJgB/WlVu+qtsl
 aGJFLmb6vdQacp31noU5plKrMgMA1pADyF5qx9I9K2HwowHE7T368ZEFS/3S//c3
 LXmpx/Nfq52sGu/qbRbu6B1CTJhIGhmarObyQnvBYoKntK1Ov4e8DS95wD3EhNDe
 FuRkOCUKhjl6cFy7QVWh1ct1bFm84ny+b4/AtbpOmv9l/+0mveJ7e+5mu8HQTifT
 wYiEe2xzXJ+OG/xntv8SvlZKMpjP3BqI0jYsTutsjT4oHrciiXdXM186cyS+BiGp
 KtFmWyncQJgfiTq6+Hj5XpP9BapNS+OYdYgUagw9ZwzdzptuGFYUMSVOBrYrn6c/
 fwqtxjubykJoW0P3pkIoT91arFSea7nxOKnGwft06imQ7TwR4ARsI308feQ9itJq
 2P2e7/20nYMsw2aRaUDDA70Yu+Lagn1m8WL87IybUGeUDLb1BAkjphAlWa6COJ+u
 PhvAD2tvyM9m0c7O5Mytvz7iWKG6SVgatoAyOPkaeplQK8khZ+wEpuK58sO6C1w8
 4GBvt9ri9i/Ww/A+ppWs
 =4bfw
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This adds a user for the new 'bytes-remaining' updates to
  memcpy_mcsafe() that you already received through Ingo via the
  x86-dax- for-linus pull.

  Not included here, but still targeting this cycle, is support for
  handling memory media errors (poison) consumed via userspace dax
  mappings.

  Summary:

   - DAX broke a fundamental assumption of truncate of file mapped
     pages. The truncate path assumed that it is safe to disconnect a
     pinned page from a file and let the filesystem reclaim the physical
     block. With DAX the page is equivalent to the filesystem block.
     Introduce dax_layout_busy_page() to enable filesystems to wait for
     pinned DAX pages to be released. Without this wait a filesystem
     could allocate blocks under active device-DMA to a new file.

   - DAX arranges for the block layer to be bypassed and uses
     dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
     However, the memcpy_mcsafe() facility is available through the pmem
     block driver. In order to safely handle media errors, via the DAX
     block-layer bypass, introduce copy_to_iter_mcsafe().

   - Fix cache management policy relative to the ACPI NFIT Platform
     Capabilities Structure to properly elide cache flushes when they
     are not necessary. The table indicates whether CPU caches are
     power-fail protected. Clarify that a deep flush is always performed
     on REQ_{FUA,PREFLUSH} requests"

* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
  dax: Use dax_write_cache* helpers
  libnvdimm, pmem: Do not flush power-fail protected CPU caches
  libnvdimm, pmem: Unconditionally deep flush on *sync
  libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
  acpi, nfit: Remove ecc_unit_size
  dax: dax_insert_mapping_entry always succeeds
  libnvdimm, e820: Register all pmem resources
  libnvdimm: Debug probe times
  linvdimm, pmem: Preserve read-only setting for pmem devices
  x86, nfit_test: Add unit test for memcpy_mcsafe()
  pmem: Switch to copy_to_iter_mcsafe()
  dax: Report bytes remaining in dax_iomap_actor()
  dax: Introduce a ->copy_to_iter dax operation
  uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
  xfs, dax: introduce xfs_break_dax_layouts()
  xfs: prepare xfs_break_layouts() for another layout type
  xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
  mm, fs, dax: handle layout changes to pinned dax mappings
  mm: fix __gup_device_huge vs unmap
  mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
  ...
2018-06-08 17:21:52 -07:00
Linus Torvalds
f4e70c2e5f MTD changes:
Core changes:
   - Add a sysfs attribute to expose available OOB size
 
   Driver changes:
   - Remove HAS_DMA dependency on various drivers
   - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
   - Replace msleep by usleep_range() in the dataflash driver
   - Avoid VLA usage in nftl layers
   - Remove useless .owner assignment in pismo
   - Fix various issues in the CFI driver
   - Improve TRX partition handling expose a DT compat for this part
     parser
   - Clarify OFFSET_CONTINUOUS meaning
 
 NAND changes:
   Core changes:
   - Add Miquel as a NAND maintainer
   - Add access mode to the nand_page_io_req struct
   - Fix kernel-doc in rawnand.h
   - Support bit-wise majority to recover from corrupted ONFI parameter
     pages
   - Stop checking FAIL bit after a SET_FEATURES, as documented in the
     ONFI spec
 
   Raw NAND Driver changes:
   - Fix and cleanup the error path of many NAND controller drivers
   - GPMI:
     * Cleanup/simplification of a few aspects in the driver
     * Take ECC setup specified in the DT into account
   - sunxi: remove support for GPIO-based R/B polling
   - MTK:
     * Use of_device_get_match_data() instead of of_match_device()
     * Add an entry in MAINTAINERS for this driver
     * Fix nand-ecc-step-size and nand-ecc-strength description in the DT
       bindings doc
   - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
 
   OneNAND driver changes:
   - samsung: use dev_get_drvdata() instead of platform_get_drvdata()
 
 SPI NOR changes:
   Core changes:
   - Add support for a bunch of SPI NOR chips
   - Clear EAR reg when switching to 3-byte addressing mode on Winbond
     chips
 
   SPI NOR controller driver changes:
   - cadence: Add DMA support for direct mode reads
   - hisi: Prefix a few functions with hisi_
   - intel:
     * Mark the driver as "dangerous" in Kconfig
     * Fix atomic sequence handling
     * Pass a 40us delay (instead of 0us) to readl_poll_timeout()
   - fsl:
     * fix a typo in a function name
     * add support for IP variants embedded in the ls2080a and ls1080a
       SoCs
   - stm32: request exclusive control of the reset line
 -----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJbGZ/KHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwBhLRAAqj0wXUjyO836NSqYboF21b+eLCLAOojydRCIQjbMYkEQ1ifZ
 vLEwHy8vDYYnJyT+cXlP8wpImh7grhCrq3jPW/SDU2xljUC4TXAAVrfSYw6EJ5at
 TJBum4+DVkTr3ZgBUI/RxDmao0i+29ztK/viHnLEeDziWaFGJqy0C8FtMwFf6MTF
 LwbmCD0KppoLUP0CW/V+fITu8+FBOFsLdDXUi//GIIMeUE3smvGbhXrRZsFoXC3p
 5sgo6Dn3f87uO/fK2x2YNf9uXAb2fRuqnCmXwu+AXEW1NLBzkU0TlxerPxbbrmAR
 wNqBRK/mw+uIILAZgi8tiCRreFYGNNefK+cpf7lqFpZVgBWJJxBMkfy1UdXupUQx
 N/2J+UpGKlGtevvW1CnTXvK0zeXg8FwGREXL4il02Sg57s7IkvG/xIoSN2Nofs9K
 KULDJ8CE1BtH/LwdKHpe7DLzc1I3E8DRzzbVzEzZuW/ukMnqCgouF4wNsjmUJHmm
 KfCNan8CWCU6QyqVIGd3ucm5RXwwaEiMrXxoCmjmkJy8+4eDTYNWgruFSU/adOtU
 lABuvzVzoJ3UKvdxjlirg83EcWrazj4W2/COz+Hpxaa+vAwAPb1GoxyNKqGpdL8p
 lugJOps4rHuFF6xJX/AwSrL5C1cmpuKXICqkErTieKT1YZhpx72v7rFXEK4=
 =cHjU
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "Core changes:
   - Add a sysfs attribute to expose available OOB size

  Driver changes:
   - Remove HAS_DMA dependency on various drivers
   - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
   - Replace msleep by usleep_range() in the dataflash driver
   - Avoid VLA usage in nftl layers
   - Remove useless .owner assignment in pismo
   - Fix various issues in the CFI driver
   - Improve TRX partition handling expose a DT compat for this part
     parser
   - Clarify OFFSET_CONTINUOUS meaning

  NAND core changes:
   - Add Miquel as a NAND maintainer
   - Add access mode to the nand_page_io_req struct
   - Fix kernel-doc in rawnand.h
   - Support bit-wise majority to recover from corrupted ONFI parameter
     pages
   - Stop checking FAIL bit after a SET_FEATURES, as documented in the
     ONFI spec

  Raw NAND Driver changes:
   - Fix and cleanup the error path of many NAND controller drivers
   - GPMI:
      + Cleanup/simplification of a few aspects in the driver
      + Take ECC setup specified in the DT into account
   - sunxi: remove support for GPIO-based R/B polling
   - MTK:
      + Use of_device_get_match_data() instead of of_match_device()
      + Add an entry in MAINTAINERS for this driver
      + Fix nand-ecc-step-size and nand-ecc-strength description in the
        DT bindings doc
   - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page

  OneNAND driver changes:
   - samsung: use dev_get_drvdata() instead of platform_get_drvdata()

  SPI NOR core changes:
   - Add support for a bunch of SPI NOR chips
   - Clear EAR reg when switching to 3-byte addressing mode on Winbond
     chips

  SPI NOR controller driver changes:
   - cadence: Add DMA support for direct mode reads
   - hisi: Prefix a few functions with hisi_
   - intel:
      + Mark the driver as "dangerous" in Kconfig
      + Fix atomic sequence handling
      + Pass a 40us delay (instead of 0us) to readl_poll_timeout()
   - fsl:
      + fix a typo in a function name
      + add support for IP variants embedded in the ls2080a and ls1080a
        SoCs
   - stm32: request exclusive control of the reset line"

* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
  mtd: nand: Pass mode information to nand_page_io_req
  mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
  mtd: cfi_cmdset_0002: Change erase functions to check chip good only
  mtd: cfi_cmdset_0002: Change erase functions to retry for error
  mtd: cfi_cmdset_0002: Change definition naming to retry write operation
  mtd: cfi_cmdset_0002: Change write buffer to check correct value
  mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
  mtd: bcm47xxpart: add of_match_table with a new DT binding
  dt-bindings: mtd: document Broadcom's BCM47xx partitions
  mtd: spi-nor: Add support for EN25QH32
  mtd: spi-nor: Add support for is25wp series chips
  mtd: spi-nor: Add Winbond w25q32jv support
  mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
  mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
  mtd: spi-nor: intel: provide a range for poll_timout
  mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
  mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
  mtd: spi-nor: intel-spi: Fix atomic sequence handling
  mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
  mtd: rawnand: use bit-wise majority to recover the ONFI param page
  ...
2018-06-08 10:39:20 -07:00
Linus Torvalds
00d535a386 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
 "From Mimi:

   - add run time support for specifying additional security xattrs
     included in the security.evm HMAC/signature

   - some code clean up and bug fixes"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  EVM: unlock on error path in evm_read_xattrs()
  EVM: prevent array underflow in evm_write_xattrs()
  EVM: Fix null dereference on xattr when xattr fails to allocate
  EVM: fix memory leak of temporary buffer 'temp'
  IMA: use list_splice_tail_init_rcu() instead of its open coded variant
  ima: use match_string() helper
  ima: fix updating the ima_appraise flag
  ima: based on policy verify firmware signatures (pre-allocated buffer)
  ima: define a new policy condition based on the filesystem name
  EVM: Allow runtime modification of the set of verified xattrs
  EVM: turn evm_config_xattrnames into a list
  integrity: Add an integrity directory in securityfs
  ima: Remove unused variable ima_initialized
  ima: Unify logging
  ima: Reflect correct permissions for policy
2018-06-07 15:40:37 -07:00
Linus Torvalds
3036bc4536 media updates for v4.18-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbGDjcAAoJEAhfPr2O5OEV1KwP/Am2n5Ehc2W0/DLD3K7LlwgN
 8JnMPWNQTCreLRgJD0/KX+HH1M+yBJ05KF/Glm7fcOKpOhWqrUbPgtiQT0GyHHBB
 uvmQfGJrRvCrP+1S1SeWtNhItsyWvCfDaorzsTWJYEF/F9Wtj/Sj92DC1y/BKQaR
 Rcs4yeCqlFEp3rjbXExanFhA3/XeMzK2sby8c51cILTZPkWI64qrHcZRWOW7+zZ6
 fKEVDNOKxa7sfg8I9yaI73lBGXBpCJxLROloJ3jEtuH5gY3nR6PZdXunBC5K0+pX
 UH1vUeBcS/3ExQWL0zmCqHz1aYb6kzTSbIPs+NktxyzTTb8FDjT9JhV/9AxhEQfK
 iIxv81LRBdbEoPxbvx88sj5VVvlRla/NRv03WsXhhVDqx2SZJuNgSXw3XJtGDx3j
 AuUur0AQH4KMNNmwxmyn6wbhm7N63AaGbmYE2sRmaL7lk6b48BSbsUpOM5AMWzZe
 ZsESSsoqjRR86zFtVVzI7ZImCk16D6mNRP94Z0DQReWAJ6zS57/EYfKZ+pEQ6mww
 IyoJalD+pBe160fqsSo59F4k2fqzsqP4p8m29OQWFvyl7+UboMBz7FscWfyT98+R
 MbJolZ8QJNlOVaOusxPYLfdfjVmkHCt4E0cBZVFYIvliTGd5QiKqHAW+kTYQH0No
 Y0nHm4bShsUY8I9YCgsk
 =r/WP
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - remove of atomisp driver from staging, as nobody would have time to
   dedicate huge efforts to fix all the problems there. Also, we have a
   feeling that the driver may not even run the way it is.

 - move Zoran driver to staging, in order to be either fixed to use VB2
   and the proper media kAPIs or to be removed

 - remove videobuf-dvb driver, with is unused for a while

 - some V4L2 documentation fixes/improvements

 - new sensor drivers: imx258 and ov7251

 - a new driver was added to allow using I2C transparent drivers

 - several improvements at the ddbridge driver

 - several improvements at the ISDB pt1 driver, making it more coherent
   with the DVB framework

 - added a new platform driver for MIPI CSI-2 RX: cadence

 - now, all media drivers can be compiled on x86 with COMPILE_TEST

 - almost all media drivers now build on non-x86 architectures with
   COMPILE_TEST

 - lots of other random stuff: cleanups, support for new board models,
   bug fixes, etc

* tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
  media: omap2: fix compile-testing with FB_OMAP2=m
  media: media/radio/Kconfig: add back RADIO_ISA
  media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl()
  media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
  media: arch: sh: migor: Fix TW9910 PDN gpio
  media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure
  media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG
  media: marvel-ccic: allow ccic and mmp drivers to coexist
  media: uvcvideo: Prevent setting unavailable flags
  media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges
  media: dvb-frontends/stv0910: make TS speed configurable
  media: ddbridge/mci: add identifiers to function definition arguments
  media: ddbridge/mci: protect against out-of-bounds array access in stop()
  media: rc: ensure input/lirc device can be opened after register
  media: rc: nuvoton: Keep device enabled during reg init
  media: rc: nuvoton: Keep track of users on CIR enable/disable
  media: rc: nuvoton: Tweak the interrupt enabling dance
  media: uvcvideo: Support realtek's UVC 1.5 device
  media: uvcvideo: Fix driver reference counting
  media: gspca_zc3xx: Enable short exposure times for OV7648
  ...
2018-06-07 12:34:37 -07:00
Linus Torvalds
c90fca951e powerpc updates for 4.18
Notable changes:
 
  - Support for split PMD page table lock on 64-bit Book3S (Power8/9).
 
  - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
    patching again.
 
  - Add support for patching barrier_nospec in copy_from_user() and syscall entry.
 
  - A couple of fixes for our data breakpoints on Book3S.
 
  - A series from Nick optimising TLB/mm handling with the Radix MMU.
 
  - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
 
  - Several series optimising various parts of the 32-bit code from Christophe Leroy.
 
  - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
    which is why the diffstat has so many deletions.
 
 And many other small improvements & fixes.
 
 There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
 a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
 fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
 ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
 
 Thanks to:
   Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
   Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
   Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
   Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
   Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
   Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
   Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
   Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
   Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
   Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
   Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
   Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
   Yisheng Xie, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJbGQKBExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBq
 TRAAioK7rz5xYMkxaM3Ng3ybobEeNAwQqOolz98xvmnB9SfDWNuc99vf8cGu0/fQ
 zc8AKZ5RcnwipOjyGlxW9oa1ZhVq0xtYnQPiYLEKMdLQmh5D+C7+KpvAd1UElweg
 ub40/xDySWfMujfuMSF9JDCWPIXyojt4Xg5nJKIVRrAm/3YMe/+i5Am7NWHuMCEb
 aQmZtlYW5Mz81XY0968hjpUO6eKFRmsaM7yFAhGTXx6+oLRpGj1PZB4AwdRIKS2L
 Ak7q/VgxtE4W+s3a0GK2s+eXIhGKeFuX9AVnx3nti+8/K1OqrqhDcLMUC/9JpCpv
 EvOtO7dxPnZujHjdu4Eai/xNoo4h6zRy7bWqve9LoBM40CP5jljKzu1lwqqb5yO0
 jC7/aXhgiSIxxcRJLjoI/TYpZPu40MifrkydmczykdPyPCnMIWEJDcj4KsRL/9Y8
 9SSbJzRNC/SgQNTbUYPZFFi6G0QaMmlcbCb628k8QT+Gn3Xkdf/ZtxzqEyoF4Irq
 46kFBsiSSK4Bu0rVlcUtJQLgdqytWULO6NKEYnD67laxYcgQd8pGFQ8SjZhRZLgU
 q5LA3HIWhoAI4M0wZhOnKXO6JfiQ1UbO8gUJLsWsfF0Fk5KAcdm+4kb4jbI1H4Qk
 Vol9WNRZwEllyaiqScZN9RuVVuH0GPOZeEH1dtWK+uWi0lM=
 =ZlBf
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for split PMD page table lock on 64-bit Book3S (Power8/9).

   - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
     live patching again.

   - Add support for patching barrier_nospec in copy_from_user() and
     syscall entry.

   - A couple of fixes for our data breakpoints on Book3S.

   - A series from Nick optimising TLB/mm handling with the Radix MMU.

   - Numerous small cleanups to squash sparse/gcc warnings from Mathieu
     Malaterre.

   - Several series optimising various parts of the 32-bit code from
     Christophe Leroy.

   - Removal of support for two old machines, "SBC834xE" and "C2K"
     ("GEFanuc,C2K"), which is why the diffstat has so many deletions.

  And many other small improvements & fixes.

  There's a few out-of-area changes. Some minor ftrace changes OK'ed by
  Steve, and a fix to our powernv cpuidle driver. Then there's a series
  touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
  around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
  been in next for several weeks.

  Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
  Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
  Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
  Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
  Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
  Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
  Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
  Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
  Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
  Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
  Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
  Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"

* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
  powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
  cpuidle: powernv: Fix promotion from snooze if next state disabled
  powerpc: fix build failure by disabling attribute-alias warning in pci_32
  ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
  powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
  powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
  powerpc/pkeys: Detach execute_only key on !PROT_EXEC
  powerpc/powernv: copy/paste - Mask SO bit in CR
  powerpc: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove support for Marvell mv64x60 i2c controller
  powerpc/boot: Remove support for Marvell MPSC serial controller
  powerpc/embedded6xx: Remove C2K board support
  powerpc/lib: optimise PPC32 memcmp
  powerpc/lib: optimise 32 bits __clear_user()
  powerpc/time: inline arch_vtime_task_switch()
  powerpc/Makefile: set -mcpu=860 flag for the 8xx
  powerpc: Implement csum_ipv6_magic in assembly
  powerpc/32: Optimise __csum_partial()
  powerpc/lib: Adjust .balign inside string functions for PPC32
  ...
2018-06-07 10:23:33 -07:00
Linus Torvalds
abf7dba7c4 Char/Misc driver patches for 4.18-rc1
Here is the "big" char and misc driver patches for 4.18-rc1.
 
 It's not a lot of stuff here, but there are some highlights:
 	- coreboot driver updates
 	- soundwire driver updates
 	- android binder updates
 	- fpga big sync, mostly documentation
 	- lots of minor driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxbXfQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymwCACdFbUy2kWwrpZWSfSBpawfrs75lLMAmwVOe+62
 9aDsDWzDVUEFxF20qiE6
 =CMJ3
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the "big" char and misc driver patches for 4.18-rc1.

  It's not a lot of stuff here, but there are some highlights:

   - coreboot driver updates

   - soundwire driver updates

   - android binder updates

   - fpga big sync, mostly documentation

   - lots of minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits)
  vmw_balloon: fixing double free when batching mode is off
  MAINTAINERS: Add driver-api/fpga path
  fpga: clarify that unregister functions also free
  documentation: fpga: move fpga-region.txt to driver-api
  documentation: fpga: add bridge document to driver-api
  documentation: fpga: move fpga-mgr.txt to driver-api
  Documentation: fpga: move fpga overview to driver-api
  fpga: region: kernel-doc fixes
  fpga: bridge: kernel-doc fixes
  fpga: mgr: kernel-doc fixes
  fpga: use SPDX
  fpga: region: change api, add fpga_region_create/free
  fpga: bridge: change api, don't use drvdata
  fpga: manager: change api, don't use drvdata
  fpga: region: don't use drvdata in common fpga code
  Drivers: hv: vmbus: Removed an unnecessary cast from void *
  ver_linux: Drop redundant calls to system() to test if file is readable
  ver_linux: Move stderr redirection from function parameter to function body
  misc: IBM Virtual Management Channel Driver (VMC)
  rpmsg: Correct support for MODULE_DEVICE_TABLE()
  ...
2018-06-05 16:20:22 -07:00
Linus Torvalds
07c4dd3435 USB/PHY patches for 4.18-rc1
Here is the big USB pull request for 4.18-rc1.
 
 Lots of stuff here, the highlights are:
 	- phy driver updates and new additions
 	- usual set of xhci driver updates
 	- normal set of musb updates
 	- gadget driver updates and new controllers
 	- typec work, it's getting closer to getting fully out of the
 	  staging portion of the tree.
 	- lots of minor cleanups and bugfixes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWxba6w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykumQCg2abWE5LijR0SNJIwX8xk64HLUAMAnAxBZDG3
 aB0GyOQd54L+09q4LAdn
 =ZCEx
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and PHY updates from Greg KH:
 "Here is the big USB pull request for 4.18-rc1.

  Lots of stuff here, the highlights are:

   - phy driver updates and new additions

   - usual set of xhci driver updates

   - normal set of musb updates

   - gadget driver updates and new controllers

   - typec work, it's getting closer to getting fully out of the staging
     portion of the tree.

   - lots of minor cleanups and bugfixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue"
  xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers
  xhci: Allow more than 32 quirks
  usb: xhci: force all memory allocations to node
  selftests: add test for USB over IP driver
  USB: typec: fsusb302: no need to check return value of debugfs_create_dir()
  USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions
  USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions
  USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions
  USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions
  USB: dwc3: no need to check return value of debugfs_create functions
  USB: dwc2: no need to check return value of debugfs_create functions
  USB: core: no need to check return value of debugfs_create functions
  USB: chipidea: no need to check return value of debugfs_create functions
  USB: ehci-hcd: no need to check return value of debugfs_create functions
  USB: fhci-hcd: no need to check return value of debugfs_create functions
  USB: fotg210-hcd: no need to check return value of debugfs_create functions
  USB: imx21-hcd: no need to check return value of debugfs_create functions
  ...
2018-06-05 16:14:12 -07:00
Linus Torvalds
eeee3149aa There's been a fair amount of work in the docs tree this time around,
including:
 
  - Extensive RST conversions and organizational work in the
    memory-management docs thanks to Mike Rapoport.
 
  - An update of Documentation/features from Andrea Parri and a script to
    keep it updated.
 
  - Various LICENSES updates from Thomas, along with a script to check SPDX
    tags.
 
  - Work to fix dangling references to documentation files; this involved a
    fair number of one-liner comment changes outside of Documentation/
 
 ...and the usual list of documentation improvements, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbFTkKAAoJEI3ONVYwIuV6t24P/0K9qltHkLwsBo2fbGu/emem
 mb1QrZCFZGebKVrCIvET3YcT0q0xPW+ZldwMQYEUeCcu/vD3cGHGXlDbVJCa1fFD
 2OS10W/sEObPnREtlHO/zAzpapKP9DO1/f6NhO55iBJLGOCgoLL5xvSqgsI8MTGd
 vcJDXLitkh4CJEcfNLkQt8dEZzq9Tb6wdSFIvZBBXRNon2ItVN92D5xoQ0wtB+qt
 KmcGYofajK9bjtZpnC4iNg3i+zdwkd80bGTEN9f0hJTRZK5emCILk8fip8CMhRuB
 iwmcqb2RnMLydNLyK9RSs6OS5z3G4fYu9llRtLlZBAupcjRVpalWaBGxLOVO6jBG
 mvkqdKPMtxV4c7NvwKwFQL9dcjtxsxO4RDRYVWN82dS1L6WKKk8UvTuJUBLH0YA5
 af7ZKn7mJVhJ1cxPblaEBOBM3oQuk57LLkjmcpMOXyJ/IOkTIuV1Ezht+XzFyFQv
 VWSyekiKo+8D6WHACPTaWiizjW15e8CyP+WIhKzJyn7VQQrZwhsOS+R//ITsuvQ0
 vRdZ20lwUeBhR+mnXd5NfIo2w7G+OiqiREVAgxjgRrS0PnkzWG7lzzcSVU8HTfT4
 S7VXqval2a9Xg+N8aU2JUe49W858J8hKvIa98hBxGoZa84wxOGtEo7pIKhnMwMSe
 Uhkh/1/bQMxsK3fBEF74
 =I6FG
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.18' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "There's been a fair amount of work in the docs tree this time around,
  including:

   - Extensive RST conversions and organizational work in the
     memory-management docs thanks to Mike Rapoport.

   - An update of Documentation/features from Andrea Parri and a script
     to keep it updated.

   - Various LICENSES updates from Thomas, along with a script to check
     SPDX tags.

   - Work to fix dangling references to documentation files; this
     involved a fair number of one-liner comment changes outside of
     Documentation/

  ... and the usual list of documentation improvements, typo fixes, etc"

* tag 'docs-4.18' of git://git.lwn.net/linux: (103 commits)
  Documentation: document hung_task_panic kernel parameter
  docs/admin-guide/mm: add high level concepts overview
  docs/vm: move ksm and transhuge from "user" to "internals" section.
  docs: Use the kerneldoc comments for memalloc_no*()
  doc: document scope NOFS, NOIO APIs
  docs: update kernel versions and dates in tables
  docs/vm: transhuge: split userspace bits to admin-guide/mm/transhuge
  docs/vm: transhuge: minor updates
  docs/vm: transhuge: change sections order
  Documentation: arm: clean up Marvell Berlin family info
  Documentation: gpio: driver: Fix a typo and some odd grammar
  docs: ranoops.rst: fix location of ramoops.txt
  scripts/documentation-file-ref-check: rewrite it in perl with auto-fix mode
  docs: uio-howto.rst: use a code block to solve a warning
  mm, THP, doc: Add document for thp_swpout/thp_swpout_fallback
  w1: w1_io.c: fix a kernel-doc warning
  Documentation/process/posting: wrap text at 80 cols
  docs: admin-guide: add cgroup-v2 documentation
  Revert "Documentation/features/vm: Remove arch support status file for 'pte_special'"
  Documentation: refcount-vs-atomic: Update reference to LKMM doc.
  ...
2018-06-04 12:34:27 -07:00
Dan Williams
d4dd70915e acpi, nfit: Remove ecc_unit_size
The "Clear Error Unit" may be smaller than the ECC unit size on some
devices. For example, poison may be tracked at 64-byte alignment even
though the ECC unit is larger. Unless / until the ACPI specification
provides a non-ambiguous way to communicate this property do not expose
this to userspace.

Software that had been using this property must already be prepared for
the case where the property is not provided on older kernels, so it is
safe to remove this attribute.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-06-03 12:49:15 -07:00
Michael Ellerman
f1079d3a3d Merge branch 'fixes' into next
We ended up with an ugly conflict between fixes and next in ftrace.h
involving multiple nested ifdefs, and the automatic resolution is
wrong. So merge fixes into next so we can fix it up.
2018-06-03 20:32:02 +10:00
Vaibhav Jain
b6c84ba22f cxl: Disable prefault_mode in Radix mode
Currently we see a kernel-oops reported on Power-9 while attaching a
context to an AFU, with radix-mode and sysfs attr 'prefault_mode' set
to anything other than 'none'. The backtrace of the oops is of this
form:

  Unable to handle kernel paging request for data at address 0x00000080
  Faulting instruction address: 0xc00800000bcf3b20
  cpu 0x1: Vector: 300 (Data Access) at [c00000037f003800]
      pc: c00800000bcf3b20: cxl_load_segment+0x178/0x290 [cxl]
      lr: c00800000bcf39f0: cxl_load_segment+0x48/0x290 [cxl]
      sp: c00000037f003a80
     msr: 9000000000009033
     dar: 80
   dsisr: 40000000
    current = 0xc00000037f280000
    paca    = 0xc0000003ffffe600   softe: 3        irq_happened: 0x01
      pid   = 3529, comm = afp_no_int
  <snip>
  cxl_prefault+0xfc/0x248 [cxl]
  process_element_entry_psl9+0xd8/0x1a0 [cxl]
  cxl_attach_dedicated_process_psl9+0x44/0x130 [cxl]
  native_attach_process+0xc0/0x130 [cxl]
  afu_ioctl+0x3f4/0x5e0 [cxl]
  do_vfs_ioctl+0xdc/0x890
  ksys_ioctl+0x68/0xf0
  sys_ioctl+0x40/0xa0
  system_call+0x58/0x6c

The issue is caused as on Power-8 the AFU attr 'prefault_mode' was
used to improve initial storage fault performance by prefaulting
process segments. However on Power-9 with radix mode we don't have
Storage-Segments that we can prefault. Also prefaulting process Pages
will be too costly and fine-grained.

Hence, since the prefaulting mechanism doesn't makes sense of
radix-mode, this patch updates prefault_mode_store() to not allow any
other value apart from CXL_PREFAULT_NONE when radix mode is enabled.

Fixes: f24be42aab ("cxl: Add psl9 specific code")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-02 01:48:05 +10:00
Eric Biggers
9ac19faa91 f2fs: fix features filename in sysfs documentation
The file is called "features", not "feature".

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-31 11:31:47 -07:00
Nicolas Boichat
aa071a92bb usb: hub: Per-port setting to reduce TRSTRCY to 10 ms
Currently, the USB hub core waits for 50 ms after enumerating the
device. This was added to help "some high speed devices" to
enumerate (b789696af8 "[PATCH] USB: relax usbcore reset timings").

On some devices, the time-to-active is important, so we provide
a per-port option to reduce the time to what the USB specification
requires: 10 ms.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31 12:48:17 +02:00
Nicolas Boichat
2524422715 usb: hub: Per-port setting to use old enumeration scheme
The "old" enumeration scheme is considerably faster (it takes
~244ms instead of ~356ms to get the descriptor).

It is currently only possible to use the old scheme globally
(/sys/module/usbcore/parameters/old_scheme_first), which is not
desirable as the new scheme was introduced to increase compatibility
with more devices.

However, in our case, we care about time-to-active for a specific
USB device (which we make the firmware for), on a specific port
(that is pogo-pin based: not a standard USB port). This new
sysfs option makes it possible to use the old scheme on a single
port only.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31 12:48:17 +02:00
Chao Yu
377224c471 f2fs: don't split checkpoint in fstrim
Now, we issue discard asynchronously in separated thread instead of in
checkpoint, after that, we won't encounter long latency in checkpoint
due to huge number of synchronous discard command handling, so, we don't
need to split checkpoint to do trim in batch, merge it and obsolete
related sysfs entry.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-30 08:58:59 -07:00
Mimi Zohar
f1b08bbcbd ima: define a new policy condition based on the filesystem name
If/when file data signatures are distributed with the file data, this
patch will not be needed.  In the current environment where only some
files are signed, the ability to differentiate between file systems is
needed.  Some file systems consider the file system magic number
internal to the file system.

This patch defines a new IMA policy condition named "fsname", based on
the superblock's file_system_type (sb->s_type) name. This allows policy
rules to be expressed in terms of the filesystem name.

The following sample rules require file signatures on rootfs files
executed or mmap'ed.

appraise func=BPRM_CHECK fsname=rootfs appraise_type=imasig
appraise func=FILE_MMAP fsname=rootfs appraise_type=imasig

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
2018-05-22 07:33:53 -04:00
Oleg Keri
40760717f9 platform/x86: ideapad-laptop: Add fn-lock setting
Some of latest Lenovo ideapad laptops do not have UEFI/BIOS setting for
switching fn-lock mode. This commit adds related acpi calls to ideapad
platform driver. However setting is available via sysfs.

Signed-off-by: Oleg Keri <ezhi99@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-05-22 12:24:12 +03:00
Linus Torvalds
3b78ce4a34 Merge branch 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge speculative store buffer bypass fixes from Thomas Gleixner:

 - rework of the SPEC_CTRL MSR management to accomodate the new fancy
   SSBD (Speculative Store Bypass Disable) bit handling.

 - the CPU bug and sysfs infrastructure for the exciting new Speculative
   Store Bypass 'feature'.

 - support for disabling SSB via LS_CFG MSR on AMD CPUs including
   Hyperthread synchronization on ZEN.

 - PRCTL support for dynamic runtime control of SSB

 - SECCOMP integration to automatically disable SSB for sandboxed
   processes with a filter flag for opt-out.

 - KVM integration to allow guests fiddling with SSBD including the new
   software MSR VIRT_SPEC_CTRL to handle the LS_CFG based oddities on
   AMD.

 - BPF protection against SSB

.. this is just the core and x86 side, other architecture support will
come separately.

* 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  bpf: Prevent memory disambiguation attack
  x86/bugs: Rename SSBD_NO to SSB_NO
  KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
  x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
  x86/bugs: Rework spec_ctrl base and mask logic
  x86/bugs: Remove x86_spec_ctrl_set()
  x86/bugs: Expose x86_spec_ctrl_base directly
  x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
  x86/speculation: Rework speculative_store_bypass_update()
  x86/speculation: Add virtualized speculative store bypass disable support
  x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
  x86/speculation: Handle HT correctly on AMD
  x86/cpufeatures: Add FEATURE_ZEN
  x86/cpufeatures: Disentangle SSBD enumeration
  x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
  x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
  KVM: SVM: Move spec control call after restore of GS
  x86/cpu: Make alternative_msr_write work for 32-bit code
  x86/bugs: Fix the parameters alignment and missing void
  x86/bugs: Make cpu_show_common() static
  ...
2018-05-21 11:23:26 -07:00
Greg Kroah-Hartman
c049ffb35a Merge 4.17-rc6 into usb-next
We want the bug fixes and this resolves the merge issues with the usbip
driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-21 08:27:15 +02:00
Matthew Garrett
fa516b66a1 EVM: Allow runtime modification of the set of verified xattrs
Sites may wish to provide additional metadata alongside files in order
to make more fine-grained security decisions[1]. The security of this is
enhanced if this metadata is protected, something that EVM makes
possible. However, the kernel cannot know about the set of extended
attributes that local admins may wish to protect, and hardcoding this
policy in the kernel makes it difficult to change over time and less
convenient for distributions to enable.

This patch adds a new /sys/kernel/security/integrity/evm/evm_xattrs node,
which can be read to obtain the current set of EVM-protected extended
attributes or written to in order to add new entries. Extending this list
will not change the validity of any existing signatures provided that the
file in question does not have any of the additional extended attributes -
missing xattrs are skipped when calculating the EVM hash.

[1] For instance, a package manager could install information about the
package uploader in an additional extended attribute. Local LSM policy
could then be associated with that extended attribute in order to
restrict the privileges available to packages from less trusted
uploaders.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-05-18 15:34:45 -04:00
Philippe Bergheaud
497a0790e2 cxl: Report the tunneled operations status
Failure to synchronize the tunneled operations does not prevent
the initialization of the cxl card. This patch reports the tunneled
operations status via /sys.

Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-15 21:30:01 +10:00
Stephen Hemminger
f59acbc5e0 doc: fix sysfs ABI documentation
In 4.9 kernel, the sysfs files for Hyper-V VMBus changed name but
the documentation files were not updated. The current sysfs file
names are /sys/bus/vmbus/devices/<UUID>/...

See commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent")
and commit f6b2db084b ("vmbus: make sysfs names consistent with PCI")

Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 16:06:48 +02:00
Greg Kroah-Hartman
6a8b25abf1 1st round of IIO new device support, features and cleanup for the 4.18 cycle
A nice mix this time of excellent cleanups (many to send drivers
 speeding toward staging graduations) and new drivers / device support.
 A good part of this is Brian Masney's never ending task on the tsl2x7x
 driver.  The end is in sight so hopefully we'll get that one out of
 staging very soon!
 
 New device support
 * AD5686
   - Support AD5685R (was wrongly present as AD5685)
   - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel
     SPI DACs with various precisions.
   - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R
     I2C DACs with various percisions and numbers of channels.
 * Analog front end rescale driver - New driver.
   - Support current sensing usings a shunt resistor.
   - Support simple voltage dividers.
   - support simple current sense amplifiers.
 * TI dac5571
   - New driver and device bindings supporting:
     dac5571, dac6571, dac7571, dac5574, dac6574, dac7574,
     dac5573, dac6573 and dac7573
 * Meson-adc
   - Support for Meson AXG with DT bindings.
 * mpu6050
   - Support the mpu9255 which only requires additional WHOAMI entry and
     compatible string.
 * st_lsm6dsx
   - Support for lsm330dlc combinded accelerometer and gyro sensors with
     DT bindings.
 * stm32_adc
   - Add support for STM32MP1 with bindings.
 
 Staging graduations
 * adis16201 after some excelent cleanup by Himanshu Jha.
 * adis16029 after some excelent cleanup by Shreeya Patel.
 
 New features:
 * ABI docs
   - Add core ABI docs for angle channels.
 * inv_mpu6050
   - Provide support for the full range of interrupts the device
     supports.
 * st_accel
   - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines.
 * stx104
   - Provide a multiple gpio get function.
 
 Cleanups / Minor fixes
 * core
   - Use new nested structure support to improve kernel-doc.
 * ad2s1200
   - Use be16_to_cpup instead of opencoding.
 * ad5686
   - Indentation tidy up.
   - Switch to SPDX
   - Refactor to allow various numbers of channels.
   - Refactor to separate core and SPI specific support, prior to
     addition of i2c equivalent devices.
 * ad7606
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * ad7746
   - Replace opencoded byte swapped i2c calls with _swapped variants.
   - White space and line break readability improvements.
   - Reorder includes and variable declarations where appropriate.
 * ad7791
   - Changes to the AD ADC library used by this driver took in the
     sampling frequency.  This lead to be the wrong path being the one
     tied to the resulting attribute, so it didn't work, and a warning
     to be printed.
 * ad7780
   - Remove apparent support for sampling frequency control on devices
     that don't support changing the sampling attributes.
 * ade7854
   - Fix a read of the wrong number of bits.
   - Improve error handling on i2c read/write errors.
   - Rework i2c and spi code to reduce duplication.
 * adis16201 (staging)
   - Improve meaning inherent in some macro names by adding units etc
     where relevant.
   - Adjust comments to improve detail and drop the irrelevant.
   - Rename register address definitions definitions to add a _REG
     postfix, clearly separating them from field definitions. Reorganize
     the definitions to group register address and fields.
   - Use sign_extend32 rather than open coding.
   - Reverse Xmas tree ordering where appropriate and align function args.
   - Remove unused headers.
   - Use GENMASK where appropriate instead of open coding.
 * adis16209 (staging)
   - Indent field definitions to visually separate them from
     register address definitions.
   - Use reverse xmas tree ordering where appropriate.
   - Add some whitespace where it will help readability.
   - Drop some unused headers.
   - Use GENMASK where appropriate.
 * ad2s1200
   - Drop unnecessary includes and reorder alphabetically.
   - Reverse xmas tree and blank line cleanups.
 * atlas-ph-sensor
   - Use msleep instead of usleep_range where the precise value doesn't
     matter and the delays are long.
 * bcm150
   - Drop transaction splitting as core now handles it.
 * cros_ec
   - Move the shared header to the include/iio/common directory.
     This brings it inline with the other multiple type devices.
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * hid-sensors
   - Use drvdata directly from device rather than boucing via the
     platform_device structure.
 * inv_mpu6050
   - Clear out a second function definition for the same function.
   - Don't flush fifo when the iio buffer is full but just drop excess
     data.
   - Tidy up set_power_itg and ensure it is used in the right places.
   - Use set_power_itg rather than opencoding it again in the i2c mux
     control.
   - Make sure error paths disable the power if undoing power on.
   - Used managed devm_ functions during probe. Delete remove function.
   - Refactor to pull raw data read out of read_raw function.
   - Simplify data reading error paths.
   - Only enable the i2c mux for chips with the i2c aux bus (not icm20608)
   - Fix a potential deadlock due to varying lock ordering.
   - Fix an issue where first sample from gyro after enabling is unstable
     by dropping the first sample.
   - Fix an issue where the user_ctrl register is incorrectly overwritten.
   - Tidy up some grammar and spelling minor issus.
 * mcp320x
   - Use vendor compatible strings.
 * mcp4018
   - Switch to using i2c .probe_new.
 * mcp4351
   - switch to using i2c .probe_new.
 * meson-adc
   - rework handing on common ADC platform data so it can be shared
     across multiple families of SoCs.
 * sca3000
   - Fix an error handling path if the ring configure fails.
 * st_lsm6dsx
   - Fix a wrong fifo threshold mask (no actual effect)
 * stm32-dfsdm
   - Style fixes and cleanups.
   - Check filter ID is in range and check spi-max-frequency.
 * tsl2x7x (staging)
   - Drop some unnecessary function calls, unused variables and
     unnecessary local variables.
   - Fix wrong interrupt type.
   - Avoid unnecessary double clear of interrupt.
   - Simplify proximity calibration call which did various things
     unrelated to actually calibrating.
   - Separate control of the proximity and ALS interrupts.
   - Improve consistency of logging.
   - Separate ALS and proximity persistence settings as they have
     separate hardware controls.
   - Tidy up variable ordering.
   - Add Brian to copyright notice given consider work on this driver.
   - Take advantage of hardware support for I2C address auto increment.
   - Combine individuaal enable and period attributes for the two
     directions on the threshold events into a single value as the
     hardware doesn't separate them.
   - Move integration_time* attributes from light channel to
     intensity value as they effect the intensity readings directly
     and the light reading only indirectly.  Hence this better
     reflects reality. Also move the calibscale_available.
   - Avoid returning an error in the IRQ handler.
   - Hard code the reg value in _clear_interrupts as it only takes
     one value in the code.   Result is the function has little
     purpose so opencode the two remaining i2c_smbus_write_byte
     calls.
   - Drop some unnecessary checking of the chip status register.
   - Tidy up return path in _write_interrupt_config.
   - Tidy up the ID verification code.
   - Move the power and diode settings defines into the header as these
     are needed for platform data configuration.
   - Various renames and comment cleanups for consistency and clarity.
   - Use actual device defaults for default startup settings.
   - SPDX
   - Add some range sanity checking to sysfs attribute writes.
   - Don't provide event interfaces if the interrupt line isn't available.
   - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant
     string.
   - Fix the integration time and lux equations.
   - Make device IDs explicit index values in the device_channel_config array.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlr0uigRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoiRhw//bIv57xenV6WV3+7Xmrp/rG4OBVzt8riD
 d9HczYKZE8/tqfB9cjF5e/xOpfin99eXBqEMWecidh3BxMNKXgnbvvCYCXF+m47D
 3cYlWvGbyZ2lbvqwbYCkk4xKfPNbRHBo5NX9TB08wf7DrAjmaudxmxDSFrRYQCho
 3Z3H2o54z1i/iJud61TApEONxr7H5oFdeb6uwNB5UVlG7XING9mfWbmlSzdlxW4X
 lHG4hC1/Pz/F4WjiLvNKccjhuq1f60CwSppKvfihq1IZKYKyHvSWjOicwrNb3QB2
 Kr0dT8yDqNKcKU1tsfgfR+YFeLKq52Ik4whulk8mkL7E4IWVIkGbL0ewkPwZ0YqO
 Cj9Nv52vzYS7x9Dj7R6f23Lwq30a19WKXixybjdo9zV14S0XKfzTmU7xC/4yhEjh
 yUg9QPjWxE5rAUTSjNF0C6tv786Y3aVYBp2jscIroSutipa6cUyc2rOKssM6GTZs
 vyRElGiUEXbg7uI7GrwN4PJszho47ptkFGn/o88Sy90KjUJ0mP15NTlp4IeSiVc/
 sM4YHHQ7tldcKqsaKeGbH8JwJNvzj9Kh20zniYd9lSZkeZusSkZUvd1FgB5uUocb
 ZZEG2IzCLM/utH49yXyaUkRS/lqoGCcObDkIHbsE1OM8q2bnZxaUYEMumxIpAs7l
 W2LBlr3vGF4=
 =egCX
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st round of IIO new device support, features and cleanup for the 4.18 cycle

A nice mix this time of excellent cleanups (many to send drivers
speeding toward staging graduations) and new drivers / device support.
A good part of this is Brian Masney's never ending task on the tsl2x7x
driver.  The end is in sight so hopefully we'll get that one out of
staging very soon!

New device support
* AD5686
  - Support AD5685R (was wrongly present as AD5685)
  - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel
    SPI DACs with various precisions.
  - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R
    I2C DACs with various percisions and numbers of channels.
* Analog front end rescale driver - New driver.
  - Support current sensing usings a shunt resistor.
  - Support simple voltage dividers.
  - support simple current sense amplifiers.
* TI dac5571
  - New driver and device bindings supporting:
    dac5571, dac6571, dac7571, dac5574, dac6574, dac7574,
    dac5573, dac6573 and dac7573
* Meson-adc
  - Support for Meson AXG with DT bindings.
* mpu6050
  - Support the mpu9255 which only requires additional WHOAMI entry and
    compatible string.
* st_lsm6dsx
  - Support for lsm330dlc combinded accelerometer and gyro sensors with
    DT bindings.
* stm32_adc
  - Add support for STM32MP1 with bindings.

Staging graduations
* adis16201 after some excelent cleanup by Himanshu Jha.
* adis16029 after some excelent cleanup by Shreeya Patel.

New features:
* ABI docs
  - Add core ABI docs for angle channels.
* inv_mpu6050
  - Provide support for the full range of interrupts the device
    supports.
* st_accel
  - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines.
* stx104
  - Provide a multiple gpio get function.

Cleanups / Minor fixes
* core
  - Use new nested structure support to improve kernel-doc.
* ad2s1200
  - Use be16_to_cpup instead of opencoding.
* ad5686
  - Indentation tidy up.
  - Switch to SPDX
  - Refactor to allow various numbers of channels.
  - Refactor to separate core and SPI specific support, prior to
    addition of i2c equivalent devices.
* ad7606
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* ad7746
  - Replace opencoded byte swapped i2c calls with _swapped variants.
  - White space and line break readability improvements.
  - Reorder includes and variable declarations where appropriate.
* ad7791
  - Changes to the AD ADC library used by this driver took in the
    sampling frequency.  This lead to be the wrong path being the one
    tied to the resulting attribute, so it didn't work, and a warning
    to be printed.
* ad7780
  - Remove apparent support for sampling frequency control on devices
    that don't support changing the sampling attributes.
* ade7854
  - Fix a read of the wrong number of bits.
  - Improve error handling on i2c read/write errors.
  - Rework i2c and spi code to reduce duplication.
* adis16201 (staging)
  - Improve meaning inherent in some macro names by adding units etc
    where relevant.
  - Adjust comments to improve detail and drop the irrelevant.
  - Rename register address definitions definitions to add a _REG
    postfix, clearly separating them from field definitions. Reorganize
    the definitions to group register address and fields.
  - Use sign_extend32 rather than open coding.
  - Reverse Xmas tree ordering where appropriate and align function args.
  - Remove unused headers.
  - Use GENMASK where appropriate instead of open coding.
* adis16209 (staging)
  - Indent field definitions to visually separate them from
    register address definitions.
  - Use reverse xmas tree ordering where appropriate.
  - Add some whitespace where it will help readability.
  - Drop some unused headers.
  - Use GENMASK where appropriate.
* ad2s1200
  - Drop unnecessary includes and reorder alphabetically.
  - Reverse xmas tree and blank line cleanups.
* atlas-ph-sensor
  - Use msleep instead of usleep_range where the precise value doesn't
    matter and the delays are long.
* bcm150
  - Drop transaction splitting as core now handles it.
* cros_ec
  - Move the shared header to the include/iio/common directory.
    This brings it inline with the other multiple type devices.
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* hid-sensors
  - Use drvdata directly from device rather than boucing via the
    platform_device structure.
* inv_mpu6050
  - Clear out a second function definition for the same function.
  - Don't flush fifo when the iio buffer is full but just drop excess
    data.
  - Tidy up set_power_itg and ensure it is used in the right places.
  - Use set_power_itg rather than opencoding it again in the i2c mux
    control.
  - Make sure error paths disable the power if undoing power on.
  - Used managed devm_ functions during probe. Delete remove function.
  - Refactor to pull raw data read out of read_raw function.
  - Simplify data reading error paths.
  - Only enable the i2c mux for chips with the i2c aux bus (not icm20608)
  - Fix a potential deadlock due to varying lock ordering.
  - Fix an issue where first sample from gyro after enabling is unstable
    by dropping the first sample.
  - Fix an issue where the user_ctrl register is incorrectly overwritten.
  - Tidy up some grammar and spelling minor issus.
* mcp320x
  - Use vendor compatible strings.
* mcp4018
  - Switch to using i2c .probe_new.
* mcp4351
  - switch to using i2c .probe_new.
* meson-adc
  - rework handing on common ADC platform data so it can be shared
    across multiple families of SoCs.
* sca3000
  - Fix an error handling path if the ring configure fails.
* st_lsm6dsx
  - Fix a wrong fifo threshold mask (no actual effect)
* stm32-dfsdm
  - Style fixes and cleanups.
  - Check filter ID is in range and check spi-max-frequency.
* tsl2x7x (staging)
  - Drop some unnecessary function calls, unused variables and
    unnecessary local variables.
  - Fix wrong interrupt type.
  - Avoid unnecessary double clear of interrupt.
  - Simplify proximity calibration call which did various things
    unrelated to actually calibrating.
  - Separate control of the proximity and ALS interrupts.
  - Improve consistency of logging.
  - Separate ALS and proximity persistence settings as they have
    separate hardware controls.
  - Tidy up variable ordering.
  - Add Brian to copyright notice given consider work on this driver.
  - Take advantage of hardware support for I2C address auto increment.
  - Combine individuaal enable and period attributes for the two
    directions on the threshold events into a single value as the
    hardware doesn't separate them.
  - Move integration_time* attributes from light channel to
    intensity value as they effect the intensity readings directly
    and the light reading only indirectly.  Hence this better
    reflects reality. Also move the calibscale_available.
  - Avoid returning an error in the IRQ handler.
  - Hard code the reg value in _clear_interrupts as it only takes
    one value in the code.   Result is the function has little
    purpose so opencode the two remaining i2c_smbus_write_byte
    calls.
  - Drop some unnecessary checking of the chip status register.
  - Tidy up return path in _write_interrupt_config.
  - Tidy up the ID verification code.
  - Move the power and diode settings defines into the header as these
    are needed for platform data configuration.
  - Various renames and comment cleanups for consistency and clarity.
  - Use actual device defaults for default startup settings.
  - SPDX
  - Add some range sanity checking to sysfs attribute writes.
  - Don't provide event interfaces if the interrupt line isn't available.
  - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant
    string.
  - Fix the integration time and lux equations.
  - Make device IDs explicit index values in the device_channel_config array.
2018-05-11 09:50:04 +02:00
Mauro Carvalho Chehab
901b9dd5e3 media: update/fix my e-mail on some places
There are two places pointing to an unexisting "m.chehab@kernel.org"
email. I never had such email, so, I'm unsure how it ends there.
Anyway, it is plain wrong.

While here, use my canonical e-mail on a bunch of places that
are pointing to another e-mail. The idea is that, from now on,
all places will be pointing to the same SMTP server.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-10 07:27:15 -04:00
Konrad Rzeszutek Wilk
c456442cd3 x86/bugs: Expose /sys/../spec_store_bypass
Add the sysfs file for the new vulerability. It does not do much except
show the words 'Vulnerable' for recent x86 cores.

Intel cores prior to family 6 are known not to be vulnerable, and so are
some Atoms and some Xeon Phi.

It assumes that older Cyrix, Centaur, etc. cores are immune.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
2018-05-03 13:55:47 +02:00
David Veenstra
b3e5c2bda9 staging: iio: Documentation: Add missing sysfs docs for angle channel
The iio resolver drivers in staging use angle channels. This patch
add missing documentation for this type of channel.

As was discussed in [1], radians is chosen as the unit, to match the
unit of angular velocity.

[1] https://marc.info/?l=linux-driver-devel&m=152190078308330&w=2

Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-28 18:35:59 +01:00
Mike Rapoport
1ad1335dc5 docs/admin-guide/mm: start moving here files from Documentation/vm
Several documents in Documentation/vm fit quite well into the "admin/user
guide" category. The documents that don't overload the reader with lots of
implementation details and provide coherent description of certain feature
can be moved to Documentation/admin-guide/mm.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-04-27 17:02:48 -06:00
Anup Patel
39e47767ec rpmsg: Add driver_override device attribute for rpmsg_device
This patch adds "driver_override" device attribute for rpmsg_device which
will allow users to explicitly specify the rpmsg_driver to be used via
sysfs entry.

The "driver_override" device attribute implemented here is very similar
to "driver_override" implemented for platform, pci, and amba bus types.

One important use-case of "driver_override" device attribute is to force
use of rpmsg_chrdev driver for certain rpmsg_device instances.

Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25 16:59:53 -07:00
Adam Thomson
cf45004195 power: supply: Add 'usb_type' property and supporting code
This commit adds the 'usb_type' property to represent USB supplies
which can report a number of different types based on a connection
event.

Examples of this already exist in drivers whereby the existing 'type'
property is updated, based on an event, to represent what was
connected (e.g. USB, USB_DCP, USB_ACA, ...). Current implementations
however don't show all supported connectable types, so this knowledge
has to be exlicitly known for each driver that supports this.

The 'usb_type' property is intended to fill this void and show users
all possible USB types supported by a driver. The property, when read,
shows all available types for the driver, and the one currently chosen
is highlighted/bracketed. It is expected that the 'type' property
would then just show the top-level type 'USB', and this would be
static.

Currently the 'usb_type' enum contains all of the USB variant types
that exist for the 'type' enum at this time, and in addition has
SDP and PPS types. The mirroring is intentional so as to not impact
existing usage of the 'type' property.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 14:17:48 +02:00
Adam Thomson
91dabc5407 Documentation: power: Initial effort to document power_supply ABI
This commit adds generic ABI information regarding power_supply
properties. This is an initial attempt to try and align the usage
of these properties between drivers. As part of this commit,
common Battery and USB related properties have been listed.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25 14:17:48 +02:00
Xiaolei Li
7cc9aa669a mtd: Add sysfs attribute for mtd OOB available size
Expose mtd OOB available size by sysfs file. Then users can get available
OOB size by accessing /sys/class/mtd/mtdX/oobavail.

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-22 20:07:06 +02:00
Mathias Nyman
b462e2e0d6 Documentation sysfs-bus-usb: Add rx_lanes and tx_lanes introduced in USB 3.2
rx_lanes and tx_lanes sysfs entries show the number of lanes in use by a
device.
USB 3.2 adds support for Dual-lane (symmetrical), using 2 rx lanes and
2 tx lanes for normal non Inter-Chip SSIC devices.
USB 3.1 and older are all single lane.

SSIC devices can have up to 4 lanes per direction in use,
with different number of rx and tx lanes.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-22 16:19:26 +02:00
Jonathan Corbet
24844fd339 Merge branch 'mm-rst' into docs-next
Mike Rapoport says:

  These patches convert files in Documentation/vm to ReST format, add an
  initial index and link it to the top level documentation.

  There are no contents changes in the documentation, except few spelling
  fixes. The relatively large diffstat stems from the indentation and
  paragraph wrapping changes.

  I've tried to keep the formatting as consistent as possible, but I could
  miss some places that needed markup and add some markup where it was not
  necessary.

[jc: significant conflicts in vm/hmm.rst]
2018-04-16 14:25:08 -06:00
Mike Rapoport
ad56b738c5 docs/vm: rename documentation files to .rst
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-04-16 14:18:15 -06:00
Linus Torvalds
fbe173e3ff RTC for 4.17
Subsystem:
  - Add tracepoints
  - Rework of the RTC/nvmem API to allow drivers to discard struct nvmem_config
    after registration
  - New range API, drivers can now expose the useful range of the RTC
  - New offset API the core is now able to add an offset to the RTC time,
    modifying the supported range.
  - Multiple rtc_time64_to_tm fixes
  - Handle time_t overflow on 32 bit platforms in the core instead of letting
    drivers do crazy things.
  - remove rtc_control API
 
 New driver:
  - Intersil ISL12026
 
 Drivers:
  - Drivers exposing the RTC non volatile memory have been converted to use nvmem
  - Removed useless time and date validation
  - Removed an indirection pattern that was a cargo cult from ancient drivers
  - Removed VLA usage
  - Fixed a possible race condition in probe functions
  - AB8540 support is dropped from ab8500
  - pcf85363 now has alarm support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlrL3s4ACgkQAyWl4gNJ
 NJI+MxAAgc56UEXi5chqKpHE6GHL2aPWan9duHB6FmGrKWt/FJmpJ8UGylLFlvaW
 dpRGvW0Dynz45UztegcrbHMU6+B2O0hboL4/GVZpYAkcNAcu7Lf0ULho2rsQSDmW
 WJpemmdRxyQY1IkWmw7z7KAkMzhAfYZiVmWmVwMRZfMcKJ3DLEldfgRtkN+g0UdB
 tayWQY3mS02ki16e2figsgwZRmUUhQslDfpKlesInXOzUMmLgVWhf1QxJSEUcfs0
 AMp75vD2YvVJ/RHy/6BilQbqP9EVnaG4NHqJGFSOddazA7u+3HGubEFboI8NuPXb
 2fCvfrNux7pgtQsBF9dnpCqWlukE7sF5aDyIUvjYnr0vUm2D/CwdXglGvQSQVWea
 5GxPTWBdaCL0V7GD5OSZcfUGyz1TN/7NSUItdLSr9YK13dL+tqhcYYm5ytXJLzvO
 Z4GyUEoCOMprMJ9j5KU/TXSjauDmPDl8YZ5B93lPcNOh7y+b/2r3umBaInyZrFzX
 1WJ6FWtuhbRfEwuQtgQHBsobt9eTwZfo8C2y22HBo/fdWfBv45feiiHNXt3OVrA+
 aws6pwfVf1H0UsvpQkXtlPthAx3sbOTndDKAUhntb/U/zA9c7fTrfUyVOQ1bArJy
 p6tl/cmlpq68AjZB+0d3zUXQkQH4Syu+EqZrWItkE6XxZm+khDE=
 =l9i8
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "This contains a few series that have been in preparation for a while
  and that will help systems with RTCs that will fail in 2038, 2069 or
  2100.

  Subsystem:
   - Add tracepoints
   - Rework of the RTC/nvmem API to allow drivers to discard struct
     nvmem_config after registration
   - New range API, drivers can now expose the useful range of the RTC
   - New offset API the core is now able to add an offset to the RTC
     time, modifying the supported range.
   - Multiple rtc_time64_to_tm fixes
   - Handle time_t overflow on 32 bit platforms in the core instead of
     letting drivers do crazy things.
   - remove rtc_control API

  New driver:
   - Intersil ISL12026

  Drivers:
   - Drivers exposing the RTC non volatile memory have been converted to
     use nvmem
   - Removed useless time and date validation
   - Removed an indirection pattern that was a cargo cult from ancient
     drivers
   - Removed VLA usage
   - Fixed a possible race condition in probe functions
   - AB8540 support is dropped from ab8500
   - pcf85363 now has alarm support"

* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
  rtc: snvs: Fix usage of snvs_rtc_enable
  rtc: mt7622: fix module autoloading for OF platform drivers
  rtc: isl12022: use true and false for boolean values
  rtc: ab8500: Drop AB8540 support
  rtc: remove a warning during scripts/kernel-doc step
  rtc: 88pm860x: remove artificial limitation
  rtc: 88pm80x: remove artificial limitation
  rtc: st-lpc: remove artificial limitation
  rtc: mrst: remove artificial limitation
  rtc: mv: remove artificial limitation
  rtc: hctosys: Ensure system time doesn't overflow time_t
  parisc: time: stop validating rtc_time in .read_time
  rtc: pcf85063: fix clearing bits in pcf85063_start_clock
  rtc: at91sam9: Set name of regmap_config
  rtc: s5m: Remove VLA usage
  rtc: s5m: Move enum from rtc.h to rtc-s5m.c
  rtc: remove VLA usage
  rtc: Add useful timestamp definitions
  rtc: Add one offset seconds to expand RTC range
  rtc: Factor out the RTC range validation into rtc_valid_range()
  ...
2018-04-10 10:22:27 -07:00