If the network configuration strings are passed as a combination of IPv4
and IPv6 addresses, the current KVP daemon does not handle processing for
the keyfile configuration format.
With these changes, the keyfile config generation logic scans through the
list twice to generate IPv4 and IPv6 sections for the configuration files
to handle this support.
Testcases ran:Rhel 9, Hyper-V VMs
(IPv4 only, IPv6 only, IPv4 and IPv6 combination)
Co-developed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
Some small fixes:
- lets make sure we are not adding ipv4 addresses in ipv6 section in
keyfile and vice versa.
- ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of
checking the whole value of addr_family.
- Some trivial fixes in hv_set_ifconfig.sh.
These fixes are proposed after doing some internal testing at Red Hat.
CC: Shradha Gupta <shradhagupta@linux.microsoft.com>
CC: Saurabh Sengar <ssengar@linux.microsoft.com>
Fixes: 42999c9046 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20231016133122.2419537-1-anisinha@redhat.com>
Ifcfg config file support in NetworkManger is deprecated. This patch
provides support for the new keyfile config format for connection
profiles in NetworkManager. The patch modifies the hv_kvp_daemon code
to generate the new network configuration in keyfile
format(.ini-style format) along with a ifcfg format configuration.
The ifcfg format configuration is also retained to support easy
backward compatibility for distro vendors. These configurations are
stored in temp files which are further translated using the
hv_set_ifconfig.sh script. This script is implemented by individual
distros based on the network management commands supported.
For example, RHEL's implementation could be found here:
https://gitlab.com/redhat/centos-stream/src/hyperv-daemons/-/blob/c9s/hv_set_ifconfig.sh
Debian's implementation could be found here:
https://github.com/endlessm/linux/blob/master/debian/cloud-tools/hv_set_ifconfig
The next part of this support is to let the Distro vendors consume
these modified implementations to the new configuration format.
Tested-on: Rhel9(Hyper-V, Azure)(nm and ifcfg files verified)
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1696847920-31125-1-git-send-email-shradhagupta@linux.microsoft.com
It is incorrect in python to compare integer values using the "is" keyword.
The "is" keyword in python is used to compare references to two objects,
not their values. Newer version of python3 (version 3.8) throws a warning
when such incorrect comparison is made. For value comparison, "==" should
be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20230705134408.6302-1-anisinha@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200705214457.28433-1-grandmaster@al2klimov.de
[ wei: change subject line to be more specific ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The state machine in the hv_utils driver can run out of order in some
corner cases, e.g. if the kvp daemon doesn't call write() fast enough
due to some reason, kvp_timeout_func() can run first and move the state
to HVUTIL_READY; next, when kvp_on_msg() is called it returns -EINVAL
since kvp_transaction.state is smaller than HVUTIL_USERSPACE_REQ; later,
the daemon's write() gets an error -EINVAL, and the daemon will exit().
We can reproduce the issue by sending a SIGSTOP signal to the daemon, wait
for 1 minute, and send a SIGCONT signal to the daemon: the daemon will
exit() quickly.
We can fix the issue by forcing a reset of the device (which means the
daemon can close() and open() the device again) and doing extra necessary
clean-up.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a userspace tool to drive the testing. Currently it supports
introducing user specified delay in the host to guest communication
path on a per-channel basis.
Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
- Removal of dependencies on PAGE_SIZE by Maya Nakamura.
- Moving the hyper-v tools/ code into the tools build system by Andy
Shevchenko.
- hyper-v balloon cleanups by Dexuan Cui.
-----BEGIN PGP SIGNATURE-----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=Dk9i
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- first round of vmbus hibernation support (Dexuan Cui)
- remove dependencies on PAGE_SIZE (Maya Nakamura)
- move the hyper-v tools/ code into the tools build system (Andy
Shevchenko)
- hyper-v balloon cleanups (Dexuan Cui)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Resume after fixing up old primary channels
Drivers: hv: vmbus: Suspend after cleaning up hv_sock and sub channels
Drivers: hv: vmbus: Clean up hv_sock channels by force upon suspend
Drivers: hv: vmbus: Suspend/resume the vmbus itself for hibernation
Drivers: hv: vmbus: Ignore the offers when resuming from hibernation
Drivers: hv: vmbus: Implement suspend/resume for VSC drivers for hibernation
Drivers: hv: vmbus: Add a helper function is_sub_channel()
Drivers: hv: vmbus: Suspend/resume the synic for hibernation
Drivers: hv: vmbus: Break out synic enable and disable operations
HID: hv: Remove dependencies on PAGE_SIZE for ring buffer
Tools: hv: move to tools buildsystem
hv_balloon: Reorganize the probe function
hv_balloon: Use a static page for the balloon_up send buffer
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree.
Switch Hyper-V daemons to be built by it.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When building hv_kvp_daemon GCC-8.3 complains:
hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’:
hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct hv_kvp_ipaddr_value *ip_buffer;
this seems to be a false positive: we only use ip_buffer when
op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE.
Silence the warning by initializing ip_buffer to NULL.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixed pep8/flake8 python style code for lsvmbus tool.
The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose good title or non infringement see
the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.459653302@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch fixes:
hv_kvp_daemon.c: In function 'kvp_set_ip_info':
hv_kvp_daemon.c:1305:2: note: 'snprintf' output between 41 and 4136 bytes
into a destination of size 4096
The "(unsigned int)str_len" is to avoid:
hv_kvp_daemon.c:1309:30: warning: comparison of integer expressions of
different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'error' variable is left uninitialized in case we see an unknown operation.
As we don't immediately return and proceed to pwrite() we need to set it
to something, HV_E_FAIL sounds good enough.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ea81fdf098 ("Tools: hv: vss: Skip freezing filesystems backed by
loop") added skip for filesystems backed by loop device. However, it seems
the detection of such cases is incomplete.
It was found that with 'devicemapper' storage driver docker creates the
following chain:
NAME MAJ:MIN
loop0 7:0
..docker-8:4-8473394-pool 253:0
..docker-8:4-8473394-eac... 253:1
so when we're looking at the mounted device we see major '253' and not '7'.
Solve the issue by walking /sys/dev/block/*/slaves chain and checking if
there's a loop device somewhere.
Other than that, don't skip mountpoints silently when stat() fails. In case
e.g. SELinux is failing stat we don't want to skip freezing everything
without letting user know about the failure.
Fixes: ea81fdf098 ("Tools: hv: vss: Skip freezing filesystems backed by loop")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Python3 changed the way how 'print' works.
Adjust the code to a syntax that is understood by python2 and python3.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of strchr requires inclusion of string.h.
Fixes: 0c38cda64a ("tools: hv: remove unnecessary header files and netlink related code")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the below warnings with new glibc and gcc:
hv_vss_daemon.c💯13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is currently
defined by <sys/types.h> as well, but we plan to remove this soon.
To use "major", include <sys/sysmacros.h> directly.
hv_fcopy_daemon.c:42:2: note: 'snprintf' output between 2 and 1040
bytes into a destination of size 260
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Hyper-V the VF NIC has the same MAC as the related synthetic NIC.
VF NIC can work under the synthetic NIC transparently, without its
own IP address. The existing KVP daemon only gets IP from the first
NIC matching a MAC address, and may not be able to find the IP in
this case.
This patch fixes the problem by searching the NIC matching the MAC,
and having an IP address. So, the IP address will be found and
reported to the host successfully.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).
Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:
~/src/linux/tools$ make iio
[snip]
iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
#include <unistd.h>
^~~~~~~~~~
This occurs because we clobber several env vars related to
cross-compiling with lines like this:
CC = $(CROSS_COMPILE)gcc
Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).
This easily shows up using a Yocto SDK:
$ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi
$ echo $CC
arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
-mcpu=cortex-a8
--sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi
$ echo $CROSS_COMPILE
arm-poky-linux-gnueabi-
$ echo ${CROSS_COMPILE}gcc
krm-poky-linux-gnueabi-gcc
Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:
$ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h
The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.
So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.
Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.
I tested both with and without the patch on native and cross-build and
there appear to be no regressions.
Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).
Fix this by reading the correct number of KVP records from file each time.
Signed-off-by: Paul Meyer <Paul.Meyer@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makefiles usually come with 'install' target included so each distro
doesn't need to implement the procedure from scratch. Add it to tools/hv.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
Currently this warning is triggered when compiling hv_fcopy_daemon:
hv_fcopy_daemon.c:216:4: warning: dereferencing type-punned pointer will break
strict-aliasing rules [-Wstrict-aliasing]
kernel_modver = *(__u32 *)buffer;
Convert the send/receive buffer to a union and pass individual members as
needed. This also gives the correct size for the buffer.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase buffer size so that "_{-INT_MAX}" will fit.
Spotted by the gcc7 snprintf checker.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since a loop device is backed by a file, a backup will already result in
its parent filesystem being frozen. It's sufficient to just freeze the
parent filesystem, so we can skip the loop device.
This avoids a situation where a loop device and its parent filesystem are
both frozen and then thawed out of order. For example, if the loop device
is enumerated first, we would thaw it while its parent filesystem is still
frozen. The thaw operation fails and the loop device remains frozen.
Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: Vyronas Tsingaras <vyronas@vtsingaras.me>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No longer needed, now all managed by transparent VF logic.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let bondvf.sh ignore this NIC if it has been configured, to prevent
user configuration from being overwritten unexpectly.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On HyperV, the VF interface can be offered by a host at any time.
Mark the VF interface as hotplug, to make sure it will be brought up
automatically when it is registered.
Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paths can be up to PATH_MAX long and PATH_MAX is usually greater than 256.
While on it, simplify path reconstruction to a simple snprintf(), define
and reuse KVP_NET_DIR.
Suggested-by: Tomas Hozza <thozza@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a FREEZE operation takes too long, the driver may time out and move on
to another operation. The daemon is unaware of this and attempts to
notify the driver that the FREEZE succeeded. This results in an error from
the driver and the daemon leaves the filesystem in frozen state.
Fix this by thawing the filesystem and continuing.
Signed-off-by: Michael Gissing <mg@faulpeltz.net>
Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The clean up function is updated to cover duplicate config info in
files included by "source" key word in Ubuntu network config.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a function to clean up duplicate config info
on Ubuntu.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAtwA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyCgCeJn36u1AsBi7qZ3u/1hwD8k56s2IAnRo6U31r
WW65YcNTK7qYXqNbfgIa
=/t/V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
uio-hv-generic: store physical addresses instead of virtual
Tools: hv: kvp: configurable external scripts path
uio-hv-generic: new userspace i/o driver for VMBus
vmbus: add support for dynamic device id's
hv: change clockevents unbind tactics
hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
hyperv: Fix spelling of HV_UNKOWN
mei: bus: enable non-blocking RX
mei: fix the back to back interrupt handling
mei: synchronize irq before initiating a reset.
VME: Remove shutdown entry from vme_driver
auxdisplay: ht16k33: select framebuffer helper modules
MAINTAINERS: add git url for fpga
fpga: Clarify how write_init works streaming modes
fpga zynq: Fix incorrect ISR state on bootup
fpga zynq: Remove priv->dev
fpga zynq: Add missing \n to messages
fpga: Add COMPILE_TEST to all drivers
uio: pruss: add clk_disable()
char/pcmcia: add some error checking in scr24x_read()
...
We found network manager is necessary on RHEL to make the synthetic
NIC, VF NIC bonding operations handled automatically. So, enabling
network manager here.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
error when running hypervkvpd:
$ sudo ./hv_kvp_daemon -n
sh: hv_get_dns_info: command not found
sh: hv_get_dhcp_info: command not found
sh: hv_get_dns_info: command not found
sh: hv_get_dhcp_info: command not found
The external scripts are not installed in system path,
adding a configurable macro.
Signed-off-by: Alex Fluter <afluter@yandex.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary header files and netlink related code as the daemons
do not use netlink to communicate with the kernel now.
Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hv_kvp_daemon.c: In function .kvp_mac_to_if_name.:
hv_kvp_daemon.c:705:2: warning: format not a string literal and no format arguments [-Wformat-security]
snprintf(dev_id, sizeof(dev_id), kvp_net_dir);
^
hv_kvp_daemon.c:705:2: warning: format not a string literal and no format arguments [-Wformat-security]
Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The link flag pthread is not needed.
Signed-off-by: Weibing Zhang <atheism.zhang@gmail.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyper-V host will send a VSS_OP_HOT_BACKUP request to check if guest is
ready for a live backup/snapshot. The driver should respond to the check
only if the daemon is running and listening to requests. This allows the
host to fallback to standard snapshots in case the VSS daemon is not
running.
Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
