Since internal_flags is only 8 bits, we can only have one
more internal flag. However, we can obviously never use all
of possible the combinations, in fact, we only use 14 of
them (including no flags).
Since we want more flags for MLO (multi-link operation) in
the future, refactor the code to use a flags selector, so
wrap all of the .internal_flags assignments in a IFLAGS()
macro which selects the combination according to the pre-
defined list of combinations.
When we need a new combination, we'll have to add it, but
again we will never use all possible combinations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220414140402.70ddf8af3eb0.I2cc38cb6a10bb4c3863ec9ee97edbcc70a07aa4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We haven't used this function for years, since commit c781944b71
("cfg80211: Remove unused cfg80211_can_use_iftype_chan()") which
itself removed a function unused since commit 97dc94f1d9
("cfg80211: remove channel_switch combination check"), almost eight
years ago.
Also remove the now unused enum cfg80211_chan_mode and some struct
members that were only used for this function.
Link: https://lore.kernel.org/r/20220412220958.1a191dca19d7.Ide4448f02d0e2f1ca2992971421ffc1933a5370a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
* wfx: silicon labs devices
* plfxlc: pureLiFi X, XL, XC devices
mac80211
* host based BSS color collision detection
* prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
* support TP-Link T2E devices
rtw89
* support firmware crash simulation
* preparation for 8852ce hardware support
ath11k
* Wake-on-WLAN support for QCA6390 and WCN6855
* device recovery (firmware restart) support for QCA6390 and WCN6855
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
wcn36xx
* support for transmit rate reporting to user space
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJxS2sRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuNgwf9H2oxMKLKrlFoX1qHtNBwZuHS6IERhOkM
NI9DjS4MCyiUSbA5r3sWlpqXQeKIbG/05gUZ6Y0ircGFwnAGjZ6isPwo8pKFgbh5
QljXQjUTHbkshrXW8K+VGJxw4F1oiPlOGUDVdXPy2FLx5ZvBlaUV2rWQUzsWX9I0
EnrM6ygHBVejVYDe+JSkb1gzb/07xuZN410IJPuZTPKJfYiE0oGU3zpTbExFitaz
ObjfFUWqHrVue525WFAJ9Dbk8kYEKyMThr7rkkWekYJjujJLJo0qhEiZVZu0eEsk
Vq4PdKmQAqlgbShQ/3Mv8BRsSH2wy62+zKjPWL+8t4Gmm9DbLu+++A==
=T7Ii
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
- wfx: silicon labs devices
- plfxlc: pureLiFi X, XL, XC devices
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most drivers should not have to worry about selecting the right
weight for their NAPI instances and pass NAPI_POLL_WEIGHT.
It'd be best if we didn't require the argument at all and selected
the default internally.
This change prepares the ground for such reshuffling, allowing
for a smooth transition. The following API should remain after
the next release cycle:
netif_napi_add()
netif_napi_add_weight()
netif_napi_add_tx()
netif_napi_add_tx_weight()
Where the _weight() variants take an explicit weight argument.
I opted for a _weight() suffix rather than a __ prefix, because
we use __ in places to mean that caller needs to also issue a
synchronize_net() call.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220502232703.396351-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change allows userspace PM implementations to reissue ADD_ADDR
announcements (if necessary) based on their chosen policy.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change records the 'server_side' attribute of MPTCP_EVENT_CREATED
and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the
Client/Server role of the running MPTCP application.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change updates internal logic to permit subflows to be
established from either the client or server ends of MPTCP
connections. This symmetry and added flexibility may be
harnessed by PM implementations running on either end in
creating new subflows.
The essence of this change lies in not relying on the
"server_side" flag (which continues to be available if needed).
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per RFC 8684, if no port is specified in an ADD_ADDR message, MPTCP
SHOULD attempt to connect to the specified address on the same port
as the port that is already in use by the subflow on which the
ADD_ADDR signal was sent.
To facilitate that, this change reflects the specific remote port in
use by that subflow in MPTCP_EVENT_ANNOUNCED events.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change reads the addr id assigned to the remote endpoint
of a subflow from the MP_JOIN SYN/ACK message and stores it
in the related subflow context. The remote id was not being
captured prior to this change, and will now provide a consistent
view of remote endpoints and their ids as seen through netlink
events.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current limits on the # of addresses/subflows must apply only to
in-kernel PM managed sockets. Thus this change removes such
restrictions on connections overseen by non-kernel (e.g. userspace)
PMs. This change also ensures that the kernel does not record stats
inside struct mptcp_pm_data updated along kernel code paths when exercised
via non-kernel PMs.
Additionally, address announcements are acknolwedged and subflow
requests are honored only when it's deemed that a userspace path
manager is active at the time.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement .freeze and .restore callbacks of struct virtio_driver
to support device suspend/resume.
During suspension all connected sockets are reset and VQs deleted.
During resume the VQs are re-initialized.
Reported by: Vilas R K <vilas.r.k@intel.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add virtio_vsock_vqs_init() and virtio_vsock_vqs_del() with the code
that was in virtio_vsock_probe() and virtio_vsock_remove to initialize
and delete VQs.
These new functions will be used in the next commit to support device
suspend/resume
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's expensive to make a copy of 40B struct iov_iter to the point it
was taking 0.2-0.5% of all cycles in my tests. iov_iter_revert() should
be fine as it's a simple case without nested reverts/truncates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a7e1690c00c5dfe700c30eb9a8a81ec59f6545dd.1650884401.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__rtnl_newlink() is 250LoC, but has a few clear sections.
Move the part which creates a new netdev to a separate
function.
For ease of review code will be moved in the next change.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit a293974590 ("rtnetlink: avoid frame size warning in rtnl_newlink()")
moved to allocating the largest attribute array of rtnl_newlink()
on the heap. Kalle reports the stack has grown above 1k again:
net/core/rtnetlink.c:3557:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Move more attrs to the heap, wrap them in a struct.
Don't bother with linkinfo, it's referenced a lot and we take
its size so it's awkward to move, plus it's small (6 elements).
Reported-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and
always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need
the TX lock (&txq->_xmit_lock).
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and
always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need
the TX lock (&txq->_xmit_lock).
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add entry for the 10base-T1L full duplex mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now we have a separate path for sock_def_write_space() and can go one
step further. When it's called from sock_wfree() we know that there is a
preceding atomic for putting down ->sk_wmem_alloc. We can use it to
replace to replace smb_mb() with a less expensive
smp_mb__after_atomic(). It also removes an extra RCU read lock/unlock as
a small bonus.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For non SOCK_USE_WRITE_QUEUE sockets, sock_wfree() (atomically) puts
->sk_wmem_alloc twice. It's needed to keep the socket alive while
calling ->sk_write_space() after the first put.
However, some sockets, such as UDP, are freed by RCU
(i.e. SOCK_RCU_FREE) and use already RCU-safe sock_def_write_space().
Carve a fast path for such sockets, put down all refs in one go before
calling sock_def_write_space() but guard the socket from being freed
by an RCU read section.
note: because TCP sockets are marked with SOCK_USE_WRITE_QUEUE it
doesn't add extra checks in its path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Except for minor rounding differences the first ->sk_wmem_alloc test in
sock_def_write_space() is a hand coded version of sock_writeable().
Replace it with the helper, and also kill the following if duplicating
the check.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two major issues in the logic calculating the symbol durations
based on the page/channel:
- The page number is used in place of the channel value.
- The BIT() macro is missing because we want to check the channel
value against a bitmask.
Fix these two errors and apologize loudly for this mistake.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220428164140.251965-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch doesn't change any functionality.
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit f84af32cbc ("net: ip_queue_rcv_skb() helper")
I dropped the skb dst in tcp_data_queue().
This only dealt with so-called TCP input slow path.
When fast path is taken, tcp_rcv_established() calls
tcp_queue_rcv() while skb still has a dst.
This was mostly fine, because most dsts at this point
are not refcounted (thanks to early demux)
However, TCP packets sent over loopback have refcounted dst.
Then commit 68822bdf76 ("net: generalize skb freeing
deferral to per-cpu lists") came and had the effect
of delaying skb freeing for an arbitrary time.
If during this time the involved netns is dismantled, cleanup_net()
frees the struct net with embedded net->ipv6.ip6_dst_ops.
Then when eventually dst_destroy_rcu() is called,
if (dst->ops->destroy) ... triggers an use-after-free.
It is not clear if ip6_route_net_exit() lacks a rcu_barrier()
as syzbot reported similar issues before the blamed commit.
( https://groups.google.com/g/syzkaller-bugs/c/CofzW4eeA9A/m/009WjumTAAAJ )
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Throw neigh checks in ip6_finish_output2() under a single slow path if,
so we don't have the overhead in the hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two callers of __ip6_finish_output(), both are in
ip6_finish_output(). We can combine the call sites into one and handle
return code after, that will inline __ip6_finish_output().
Note, error handling under NET_XMIT_CN will only return 0 if
__ip6_finish_output() succeded, and in this case it return 0.
Considering that NET_XMIT_SUCCESS is 0, it'll be returning exactly the
same result for it as before.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inline dev_queue_xmit() and dev_queue_xmit_accel(), they both are small
proxy functions doing nothing but redirecting the control flow to
__dev_queue_xmit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_zerocopy_iter_dgram() is a small proxy function, inline it. For
that, move __zerocopy_sg_from_iter into linux/skbuff.h
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sock_alloc_send_skb() is simple and just proxying to another function,
so we can inline it and cut associated overhead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is currently done for CMSG_INQ, add an ability to do so via struct
msghdr as well and have CMSG_INQ use that too. If the caller sets
msghdr->msg_get_inq, then we'll pass back the hint in msghdr->msg_inq.
Rearrange struct msghdr a bit so we can add this member while shrinking
it at the same time. On a 64-bit build, it was 96 bytes before this
change and 88 bytes afterwards.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/650c22ca-cffc-0255-9a05-2413a1e20826@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new net.mptcp.pm_type sysctl determines which path manager will be
used by each newly-created MPTCP socket.
v2: Handle builds without CONFIG_SYSCTL
v3: Clarify logic for type-specific PM init (Geliang Tang and Paolo Abeni)
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Userspace-managed sockets should not have their subflows or
advertisements changed by the kernel path manager.
v3: Use helper function for PM mode (Paolo Abeni)
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a MPTCP connection is managed by a userspace PM, bypass the kernel
PM for incoming advertisements and subflow events. Netlink events are
still sent to userspace.
v2: Remove unneeded check in mptcp_pm_rm_addr_received() (Kishen Maloor)
v3: Add and use helper function for PM mode (Paolo Abeni)
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding support for netlink path management commands, the kernel
needs to know whether paths are being controlled by the in-kernel path
manager or a userspace PM.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few members of the mptcp_pm_data struct were assigned to hard-coded
values in mptcp_pm_data_reset(), and then immediately changed in
mptcp_pm_nl_data_init().
Instead, flatten all the assignments in to mptcp_pm_data_reset().
v2: Resolve conflicts due to rename of mptcp_pm_data_reset()
v4: Resolve conflict in mptcp_pm_data_reset()
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix incorrect TCP connection tracking window reset for non-syn
packets, from Florian Westphal.
2) Incorrect dependency on CONFIG_NFT_FLOW_OFFLOAD, from Volodymyr Mytnyk.
3) Fix nft_socket from the output path, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: only do sk lookups when indev is available
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
====================
Link: https://lore.kernel.org/r/20220428142109.38726-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.
Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result. Same is true for the forward chain, so restrict the use
to prerouting, input and output.
Use in output work if a socket is already attached to the skb.
Fixes: 554ced0a6e ("netfilter: nf_tables: add support for native socket matching")
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
I missed a stray return; in net_rx_action(), which very well
is taken whenever trigger_rx_softirq() has been called on
a cpu that is no longer receiving network packets,
or receiving too few of them.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220427204147.1310161-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
