We need to error out when trying to add an entry above SIDTAB_MAX in
sidtab_reverse_lookup() to avoid overflow on the odd chance that this
happens.
Cc: stable@vger.kernel.org
Fixes: ee1a84fdfe ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The path in the schema '$id' value is wrong. Fix it.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks)
introduces hybrid PV queued/unfair locks
- queued mode (no starvation)
- unfair mode (good performance on not heavily contended lock)
The lock waiter goes into the unfair mode especially in VMs with over-commit
vCPUs since increaing over-commitment increase the likehood that the queue
head vCPU may have been preempted and not actively spinning.
However, reschedule queue head vCPU timely to acquire the lock still can get
better performance than just depending on lock stealing in over-subscribe
scenario.
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
vanilla boosting improved
1VM 23520 25040 6%
2VM 8000 13600 70%
3VM 3100 5400 74%
The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue
head vCPU which is involuntary preemption or the one which is voluntary halt
due to fail to acquire the lock after a short spin in the guest.
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a0d14b8909 ("x86/mm, tracing: Fix CR2 corruption") added the
address parameter to do_async_page_fault(), but does not pass it from the
32-bit entry point. To plumb it through, factor-out
common_exception_read_cr2 in the same fashion as common_exception, and uses
it from both page_fault and async_page_fault.
For a 32-bit KVM guest, this fixes:
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Fixes: a0d14b8909 ("x86/mm, tracing: Fix CR2 corruption")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com
If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y,
build fails:
drivers/fpga/altera-ps-spi.o: In function `altera_ps_write':
altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table'
Select BITREVERSE to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: fcfe18f885 ("fpga-manager: altera-ps-spi: use bitrev8x4")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, a transaction to context manager from its own process
is prevented by checking if its binder_proc struct is the same as
that of the sender. However, this would not catch cases where the
process opens the binder device again and uses the new fd to send
a transaction to the context manager.
Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case the target node requests a security context, the
extra_buffers_size is increased with the size of the security context.
But, that size is not available for use by regular scatter-gather
buffers; make sure the ending of that buffer is marked correctly.
Acked-by: Todd Kjos <tkjos@google.com>
Fixes: ec74136ded ("binder: create node flag to request sender's security context")
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable@vger.kernel.org # 5.1+
Link: https://lore.kernel.org/r/20190709110923.220736-1-maco@android.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying. So
ensure the default delay is applied before retrying.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.
This is likely a typo and CTRL should be CTLR here as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix sparse warnings:
drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix spelling mistake in kernel warning message and replace printk with with
pr_warn.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
perf.data:
Alexey Budankov:
- Fix loading of compressed data split across adjacent records
Jiri Olsa:
- Fix buffer size setting for processing CPU topology perf.data header.
perf stat:
Jiri Olsa:
- Fix segfault for event group in repeat mode
Cong Wang:
- Always separate "stalled cycles per insn" line, it was being appended to
the "instructions" line.
perf script:
Andi Kleen:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
Arnaldo Carvalho de Melo:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXTcpSQAKCRCyPKLppCJ+
J0s1AQCY4uEiw7ZDUMPkztqG/9nder8M4ncd2FYwsQObmjxhBQEA+u/jvJ9UcUKk
X9BpjDE+1Pi3LrMaFjDQMKgpSutzXgg=
=rAom
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.3-20190723' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf.data:
Alexey Budankov:
- Fix loading of compressed data split across adjacent records
Jiri Olsa:
- Fix buffer size setting for processing CPU topology perf.data header.
perf stat:
Jiri Olsa:
- Fix segfault for event group in repeat mode
Cong Wang:
- Always separate "stalled cycles per insn" line, it was being appended to
the "instructions" line.
perf script:
Andi Kleen:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
Arnaldo Carvalho de Melo:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[Why]
In an effort to stop redundant calls to dce110_disable_audio_stream
the audio->enabled flag was added to the audio resource struct. While
this state probably shouldn't have been tracked on the audio struct
itself it still works fine for some sequences.
However, it does not work for cases where we're freeing the audio
resource (such as hotplugs) or when dynamic audio is enabled.
In these cases the pipe_ctx->stream_res.audio = NULL before we can
set audio->enabled = false. The next time we acquire the audio resource
such as on hotplug the audio will not be enabled for the stream since
DC thinks it's still enabled.
Audio state tracking should cover this sequence.
[How]
Set audio->enabled = false at the start as long as we have
pipe_ctx->stream_res.audio.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdNs2iAAoJEFBXWFqHsHzOyZ8H/3u3AjWSJxUa845cro1Q/Ibh
Ap2Skk9NgX3Wo9oRaet6Nc44iXG4zBXYfhVyzUG5H6t2mk4S2c2RaKLd55n6mHz0
6q1G57Z9ogxBzXrWgbiZtlCOlzZCNXVWZiB5eIUT12Mway+0HMEe4zcKAEvADZnt
c2tFf2AbjRe0ye1M2a6V09/TunIT8Hv2XH88vA4MxAJauOWNTkx4TrmXVNnokax+
S5Ha0Djr7seuHf6HLr95lB7QAj0ozTpZY17HsOmdFaO2UREVftm7JMhaNmxL072u
by1hwAALp9vYaDDzfw+7NjaquJiF6rGO6Vgi78d3brBFcXPSXmXpufUffl1aFWE=
=pQlh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.3:
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: dts: imx7ulp: Fix usb-phy unit address format
Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This refreshes the outdated U8500 defconfig: some options
moved around, PS/2 mouse is no longer default on, crypto
options moved around etc.
Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
There is an spelling mistake in an a test error message. Fix it.
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixes some spelling typos in kmod.sh
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reverts commit 0298d54352.
With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.
Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.
Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().
unreferenced object 0xffff8883d12bfbc0 (size 16):
comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s)
hex dump (first 16 bytes):
6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2....
backtrace:
[<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0
[<0000000081169e5f>] kvasprintf+0xad/0x130
[<0000000025626f25>] kvasprintf_const+0x47/0x120
[<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120
[<000000004881f8b3>] dev_set_name+0x98/0xc0
[<000000007124dae3>] nvme_init_identify+0x1995/0x38e0
[<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0
[<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80
[<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220
[<000000002259b3d5>] __vfs_write+0x66/0x120
[<000000002f6df81e>] vfs_write+0x154/0x490
[<000000007e8cfc19>] ksys_write+0x10a/0x240
[<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0
[<00000000fee6d692>] do_syscall_64+0xaa/0x470
[<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.
[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22
02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:
/dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...]
/dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...]
Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423 ("dma-mapping: add a dma_addressing_limited helper")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
AMD IOMMU requires IntCapXT registers to be setup in order to generate
its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit
APIC destination ID. Without this support, AMD IOMMU MSI interrupts
will not be routed correctly when booting the system in X2APIC mode.
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 90fcffd9cf ('iommu/amd: Add support for IOMMU XT mode')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.
Update the comparison condition and clarify the resulting error
message.
Fixes: 4bf2efd26d ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:
drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
[-Werror,-Wframe-larger-than=]
We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.
Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.
Fixes: 74426fbff6 ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that, when perf_add_probe_events() fails, like in:
# perf probe icmp_rcv:64 "type=icmph->type"
Failed to find 'icmph' in this function.
Error: Failed to add events.
Segmentation fault (core dumped)
#
We don't segfault.
clear_perf_probe_event() was zeroing the whole pev, and since the switch
to zfree() for the members in the pev, that memset() was removed, which
left nargs with its original value, in the above case 1.
With the memset the same pev could be passed to clear_perf_probe_event()
multiple times, since all it would have would be zeroes, and free()
accepts zero, the loop would not happen and we would just memset it
again to zeroes.
Without it we got that segfault, so zero nargs to keep it like it was,
next cset will avoid calling clear_perf_probe_event() for the same pevs
in case of failure.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d8f9da2404 ("perf tools: Use zfree() where applicable")
Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 cores).
The error happened due to lack of decompression space for a mmaped
buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records.
$ perf report -i bt.16384.data --stats
failed to decompress (B): 63869 -> 0 : Destination buffer is too small
user stack dump failure
Can't parse sample, err = -14
0x2637e436 [0x4080]: failed to process type: 9
Error:
failed to process sample
$ perf test 71
71: Zstd perf.data compression/decompression : Ok
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "stalled cycles per insn" is appended to "instructions" when the CPU
has this hardware counter directly. We should always make it a separate
line, which also aligns to the output when we hit the "if (total &&
avg)" branch.
Before:
$ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,,
3396325133,,cycles,64146628546,100.00,,
After:
$ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
6721924,,instructions,24026790339,100.00,0.22,insn per cycle
,,,,,0.00,stalled cycles per insn
30939953,,cycles,24025512526,100.00,,
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20190517221039.8975-1-xiyou.wangcong@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat
mode:
# perf stat -e '{cycles,instructions}' -r 10 ls
It's caused by memory corruption due to not cleaned evsel's id array and
index, which needs to be rebuilt in every stat iteration. Currently the
ids index grows, while the array (which is also not freed) has the same
size.
Fixing this by releasing id array and zeroing ids index in
perf_evsel__close function.
We also need to keep the evsel_list alive for stat record (which is
disabled in repeat mode).
Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After Song Liu's segfault fix for pipe mode, Arnaldo reported following
error:
# perf record -o - | perf script
0x514 [0x1ac]: failed to process type: 80
It's caused by wrong buffer size setup in feature processing, which
makes cpu topology feature fail, because it's using buffer size to
recognize its header version.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes: e9def1b2e7 ("perf tools: Add feature header record to pipe-mode")
Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clarify that a metric is based on events, not referring to itself. Also
some improvements with the sentences.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --max-blocks description was using the old name brstackasm. Use
brstackinsn instead.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes: 4f2ab5e1d1 ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add KASAN instrumentation of architecture-specific asm implementation
of bitops. It also covers s390 specific *_inv functions.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
