This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function ieee80211_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Done using coccinelle:
@@
expression addr;
@@
- random_ether_addr(addr);
+ eth_random_addr(addr);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use eth_broadcast_addr to assign the broadcast address to the given
address array instead of memset when the second argument is a broacast
address 0xff. ETH_ALEN is a macro with value 6, so 6 is treated as
ETH_ALEN if it is the third argument of memset.
Done using coccinelle.
@@
expression e;
@@
- memset(e,\(0xff\|0xFF\|255\),\(ETH_ALEN\|6\));
+ eth_broadcast_addr(e);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer *skb2 is declared 'globally' inside ifdef NOT_YET.
It's used nowhere in the directory.
Another pointer *skb2 is declared 'locally', again inside another ifdef NOT_YET
in the function ieee80211_rx_frame_mgmt.
Hence, skb2 stays unused and has been removed.
This was done using Coccinelle:
@@ type T; identifier i; constant c; @@
-T i;
<... when != i
-i = c;
...>
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As kmalloc generates a backtrace on failure so there is no need of
these debug messages when kmalloc fails. Also remove unwanted {} around if
block after removal of these messages.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some functions return Null as their return value on failure. !x is
generally preferred over x==NULL or NULL==x. So make use of !x if
the value returned on failure is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
S
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@bad@
identifier i;
position p;
@@
i =@p <+...i...+>;
@@
type T;
constant C;
expression e;
identifier i;
position p != bad.p;
@@
T i
- = C
;
i =@p e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With cmwq, use of dedicated workqueues can be replaced by system_wq.
Removed the dedicated workqueue and used system_wq instead.
Since the work items in the workqueues do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled so it is guaranteed that no work is
running when driver is detached.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace long if-else block with switch-case to make it more readable and
compact.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function ieee80211_wep_null from the file as is it blank and
remove its declaration from the header file.
Also remove its function call as it is of no use calling this function.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the commented out places where macros PlatformAcquireSpinLock and
PlatformReleaseSpinLock are called as these macros are no longer used.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove driver specific macro msleep_interruptible_rsl as it has been
replaced by a direct call to msleep_interruptible in the single
instance referencing it.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Reviewed-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove driver specific macro MSECS since all instances of this macro
have been replaced by direct calls to msecs_to_jiffies().
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace driver specific macro MSECS with msecs_to_jiffies().
This was found using the following Coccinelle semantic patch:
//<smpl>
@@
expression e;
@@
- MSECS(e)
+ msecs_to_jiffies(e)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace driver specific macro MSECS with msecs_to_jiffies().
This was found using the following Coccinelle semantic patch:
//<smpl>
@@
expression e;
@@
- MSECS(e)
+ msecs_to_jiffies(e)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace driver specific macro MSECS with msecs_to_jiffies().
This was found using the following Coccinelle semantic patch:
//<smpl>
@@
expression e;
@@
- MSECS(e)
+ msecs_to_jiffies(e)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace driver specific macro MSECS with msecs_to_jiffies().
This was found using the following Coccinelle semantic patch:
//<smpl>
@@
expression e;
@@
- MSECS(e)
+ msecs_to_jiffies(e)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace driver specific macro MSECS with msecs_to_jiffies().
This was found using the following Coccinelle semantic patch:
//<smpl>
@@
expression e;
@@
- MSECS(e)
+ msecs_to_jiffies(e)
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In routine rtl8192_tx_isr(), pointer skb is dereferenced before it is
checked for NULL. This patch has only been compile-tested, as I do not
have the hardware. This problem was reported at
https://bugzilla.kernel.org/show_bug.cgi?id=109951.
Fixes: bugzilla.kernel.org: #109951
Reported-by: Yong Shi <brave_shi@163.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yong Shi <brave_shi@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clean up checkpatch warning:
WARNING: Block comments use * on subsequent lines
Signed-off-by: Byeoungwook Kim <quddnr145@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following compiler warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c: In function
‘RxReorderIndicatePacket’:
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c:758:1: warning: the
frame size of 1064 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
It replaces the statically allocated array prxbIndicateArray with
a kmalloc'd one.
Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch solves two problems.
The function rtl8192_CalculateBitShift() had an unnecessary variable i
that could be removed by using a single line of code.
After this change, rtl8192_CalculateBitShift() becomes a wrapper
function, so the rtl8192_CalculateBitShift() function has been removed
completely to replace it with a single line of code.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rtl8192_try_wake_queue is defined but not used, so remove it.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves the following checkpatch warnings:
- WARNING: Missing a blank line after declarations
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch warning:
- WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reformats some block comments in order to
match the Linux kernel coding style.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the indentation in five instances in the
ieee80211_crypt_tkip.c file.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
- ERROR: space required before the open parenthesis '('
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
- ERROR: spaces required around that '='
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
- ERROR: else should follow close brace '}'
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
- ERROR: that open brace { should be on the previous line
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the export symbol for static function.
The semantic patch used to find this is:
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@
-EXPORT_SYMBOL(f);
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use msecs_to_jiffies instead of driver specific macro
MSECS. This is done using Coccinelle and semantic
patch used for this is as follows:
@@expression t;@@
- MSECS(t)
+ msecs_to_jiffies(t)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code can be much cleaner and readable by simplifying the conditional
statement.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable frame_authorized is declared and mentioned in the code but
is not used anywhere so, it should be removed. Also, two case statements
are merged by removing an extra break.
Semantic patch used:
@@
type T;
identifier i;
constant C;
position p != e.p;
@@
- T i@p;
<+... when != i
- i = C;
...+>
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove NULL check on a variable as it is already preceded by one.
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
range->max_qual.noise and level are of type uint8, so they shouldn't be
assigned a negative number. Assigning them 0x100 - 98, and 0x100 - 78 which
are the equivalent to -98 dBm and -78 dBm, respectively, when IW_QUAL_DBM
is set.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ieee80211_rx_stats.noise is of type uint8, so it shouldn't be assigned a
negative number. Assigning it 0x100 - 98, which is the equivalent
to -98 dBm when IW_QUAL_DBM is set.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove commented out printk messages since they are not needed. Also remove
the unnecessary braces and blank lines
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove commented out printk messages since they are not needed
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove commented printk since it is not needed
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix error "doing DMA on the stack" by using kzalloc for buffer
allocation.
Issue found by smatch.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to correct indentation in one instance in
ieee80211_crypt_ccmp.c
Signed-off-by: Mike Dupuis <mike.dupuis.0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
