These IOCTL commands should be implemented by setting attributes on the
superblock, rather than in the IOCTL hooks in struct file_operations.
By returning -ENOTTY instead of -ENOIOCTLCMD, we instruct the fs/ioctl.c
logic to return -ENOTTY immediately, rather than attempting to call
f_op->unlocked_ioctl() or f_op->compat_ioctl() as a fallback.
Why this is safe:
Before this change, fs/ioctl.c would unsuccessfully attempt calling the
IOCTL hooks, and then return -ENOTTY. By returning -ENOTTY directly, we
return the same error code immediately, but save ourselves the fallback
attempt.
Motivation:
This simplifies the logic for these IOCTL commands and lets us reason about
the side effects of these IOCTLs more easily. It will be possible to
permit these IOCTLs under LSM IOCTL policies, without having to worry about
them getting dispatched to problematic device drivers (which sometimes do
work before looking at the IOCTL command number).
Link: https://lore.kernel.org/all/cnwpkeovzbumhprco7q2c2y6zxzmxfpwpwe3tyy6c3gg2szgqd@vfzjaw5v5imr/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240405214040.101396-2-gnoack@google.com
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new ioctl for getting the sysfs name of a filesystem - the path
under /sys/fs.
This is going to let us standardize exporting data from sysfs across
filesystems, e.g. time stats.
The returned path will always be of the form "$FSTYP/$SYSFS_IDENTIFIER",
where the sysfs identifier may be a UUID (for bcachefs) or a device name
(xfs).
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-6-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new generic ioctls for querying the filesystem UUID.
These are lifted versions of the ext4 ioctls, with one change: we're not
using a flexible array member, because UUIDs will never be more than 16
bytes.
This patch adds a generic implementation of FS_IOC_GETFSUUID, which
reads from super_block->s_uuid. We're not lifting SETFSUUID from ext4 -
that can be done on offline filesystems by the people who need it,
trying to do it online is just asking for too much trouble.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-4-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpbgAKCRCRxhvAZXjc
oi8PAQCtXelGZHmTcmevsO8p4Qz7hFpkonZ/TnxKf+RdnlNgPgD+NWi+LoRBpaAj
xk4z8SqJaTTP4WXrG5JZ6o7EQkUL8gE=
=2e9I
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
These have a variety of causes and a corresponding variety of solutions.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230818200824.2720007-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Userspace can freeze a filesystem using the FIFREEZE ioctl or by
suspending the block device; this state persists until userspace thaws
the filesystem with the FITHAW ioctl or resuming the block device.
Since commit 18e9e5104f ("Introduce freeze_super and thaw_super for
the fsfreeze ioctl") we only allow the first freeze command to succeed.
The kernel may decide that it is necessary to freeze a filesystem for
its own internal purposes, such as suspends in progress, filesystem fsck
activities, or quiescing a device prior to removal. Userspace thaw
commands must never break a kernel freeze, and kernel thaw commands
shouldn't undo userspace's freeze command.
Introduce a couple of freeze holder flags and wire it into the
sb_writers state. One kernel and one userspace freeze are allowed to
coexist at the same time; the filesystem will not thaw until both are
lifted.
I wonder if the f2fs/gfs2 code should be using a kernel freeze here, but
for now we'll use FREEZE_HOLDER_USERSPACE to preserve existing
behaviors.
Cc: mcgrof@kernel.org
Cc: jack@suse.cz
Cc: hch@infradead.org
Cc: ruansy.fnst@fujitsu.com
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
- Fix a potential infinite loop in FIEMAP by fixing an off by one error
when comparing the requested range against s_maxbytes.
-----BEGIN PGP SIGNATURE-----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=Lx1P
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fix from Darrick Wong:
"The erofs developers felt that FIEMAP should handle ranged requests
starting at s_maxbytes by returning EFBIG instead of passing the
filesystem implementation a nonsense 0-byte request.
Not sure why they keep tagging this 'iomap', but the VFS shouldn't be
asking for information about ranges of a file that the filesystem
already declared that it does not support.
- Fix a potential infinite loop in FIEMAP by fixing an off by one
error when comparing the requested range against s_maxbytes"
* tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: fix an infinite loop in iomap_fiemap
Currently we disallow reflink and dedupe if the two files aren't on the
same vfsmount. However we really only need to disallow it if they're
not on the same super block. It is very common for btrfs to have a main
subvolume that is mounted and then different subvolumes mounted at
different locations. It's allowed to reflink between these volumes, but
the vfsmount check disallows this. Instead fix dedupe to check for the
same superblock, and simply remove the vfsmount check for reflink as it
already does the superblock check.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__user annotations are used by the checker (e.g sparse) to mark user
pointers. However here __user is applied to a struct directly, without a
pointer being directly involved.
Although the presence of __user does not cause sparse to emit a warning,
__user should be removed for consistency with other uses of offsetof().
Note: No functional changes intended.
Link: https://lkml.kernel.org/r/20211122101256.7875-1-amit.kachhap@arm.com
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Strengthen parameter checking for project quota ids.
-----BEGIN PGP SIGNATURE-----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=rUwN
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull project quota update from Darrick Wong:
"A single VFS patch that prevents userspace from setting project quota
ids on files that the VFS considers invalid"
* tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: forbid invalid project ID
fileattr_set_prepare() should check if project ID
is valid, otherwise dqget() will return NULL for
such project ID quota.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There's a substantial amount of boilerplate in filesystems handling
FS_IOC_[GS]ETFLAGS/ FS_IOC_FS[GS]ETXATTR ioctls.
Also due to userspace buffers being involved in the ioctl API this is
difficult to stack, as shown by overlayfs issues related to these ioctls.
Introduce a new internal API named "fileattr" (fsxattr can be confused with
xattr, xflags is inappropriate, since this is more than just flags).
There's significant overlap between flags and xflags and this API handles
the conversions automatically, so filesystems may choose which one to use.
In ->fileattr_get() a hint is provided to the filesystem whether flags or
xattr are being requested by userspace, but in this series this hint is
ignored by all filesystems, since generating all the attributes is cheap.
If a filesystem doesn't implemement the fileattr API, just fall back to
f_op->ioctl(). When all filesystems are converted, the fallback can be
removed.
32bit compat ioctls are now handled by the generic code as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
access_ok just checks we are fed a proper user pointer. We also do that
in copy_to_user itself, so no need to do this early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-9-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no caller left outside of ioctl.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-4-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We better warn the fibmap user and not return a truncated and therefore
an incorrect block map address if the bmap() returned block address
is greater than INT_MAX (since user supplied integer pointer).
It's better to pr_warn() all user of ioctl_fibmap() and return a proper
error code rather than silently letting a FS corruption happen if the
user tries to fiddle around with the returned block map address.
We fix this by returning an error code of -ERANGE and returning 0 as the
block mapping address in case if it is > INT_MAX.
Now iomap_bmap() could be called from either of these two paths.
Either when a user is calling an ioctl_fibmap() interface to get
the block mapping address or by some filesystem via use of bmap()
internal kernel API.
bmap() kernel API is well equipped with handling of u64 addresses.
WARN condition in iomap_bmap_actor() was mainly added to warn all
the fibmap users. But now that we have directly added this warning
for all fibmap users and also made sure to return 0 as block map address
in case if addr > INT_MAX.
So we can now remove this logic from iomap_bmap_actor().
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
One patch in the compat-ioctl series broke 32-bit rootfs for multiple
people testing on 64-bit kernels. Let's fix it in -rc1 before others
run into the same issue.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uMS2
-----END PGP SIGNATURE-----
Merge tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull compat-ioctl fix from Arnd Bergmann:
"One patch in the compat-ioctl series broke 32-bit rootfs for multiple
people testing on 64-bit kernels. Let's fix it in -rc1 before others
run into the same issue"
* tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
compat_ioctl: fix FIONREAD on devices
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
My final cleanup patch for sys_compat_ioctl() introduced a regression on
the FIONREAD ioctl command, which is used for both regular and special
files, but only works on regular files after my patch, as I had missed
the warning that Al Viro put into a comment right above it.
Change it back so it can work on any file again by moving the implementation
to do_vfs_ioctl() instead.
Fixes: 77b9040195 ("compat_ioctl: simplify the implementation")
Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
FIBMAP receives an integer from userspace which is then implicitly converted
into sector_t to be passed to bmap(). No check is made to ensure userspace
didn't send a negative block number, which can end up in an underflow, and
returning to userspace a corrupted block address.
As a side-effect, the underflow caused by a negative block here, will
trigger the WARN() in iomap_bmap_actor(), which is how this issue was
first discovered.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now we have the possibility of proper error return in bmap, use bmap()
function in ioctl_fibmap() instead of calling ->bmap method directly.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that both native and compat ioctl syscalls are
in the same file, a couple of simplifications can
be made, bringing the implementation closer together:
- do_vfs_ioctl(), ioctl_preallocate(), and compat_ioctl_preallocate()
can become static, allowing the compiler to optimize better
- slightly update the coding style for consistency between
the functions.
- rather than listing each command in two switch statements
for the compat case, just call a single function that has
all the common commands.
As a side-effect, FS_IOC_RESVSP/FS_IOC_RESVSP64 are now available
to x86 compat tasks, along with FS_IOC_RESVSP_32/FS_IOC_RESVSP64_32.
This is harmless for i386 emulation, and can be considered a bugfix
for x32 emulation, which never supported these in the past.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rest of the fs/compat_ioctl.c file is no longer useful now,
so move the actual syscall as planned.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the allocation
request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never been
mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing them
to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio corrupting
the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to reduce
indirection penalties
- Ensure that dquots are attached to the inode when performing unwritten
extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl3fNjcACgkQ+H93GTRK
tOv/8w//Y0Oa9Paiy8+iPTChs3/PqeKp307Fj5KONG52haMCakEJFT5+/wpkIAJw
uUmKiPolwN1ivviIUmIS14ThTJ7NV1jq0G0h/0tC25i/3hoJrGWdzqYJMlvhlqgE
taHrjCwPTDkhRJ0D5QCrkkHPU7lSdquO5TWxltaqYLhyLIt8SkklD6dN1dHWEPnk
k0j3TL+VqVJDYyEj1bLwJ0QUb2C3J8ygWnlviF/WxsSeJtJpGoeLEaYXhhsUK0Dt
aHg70OM6zzFzrJJAtJeBXpgaFsG/Pqbcw4wUWSxEMWjVSJwCSKLuZ5F+p6NcqoEj
HeLQkaGePoO61YCInk2JKLHIyx7ohqMOt7+Dm0mdbe1pvcKwV9ZcdkqKa8L/Fm6v
bUP6a2hEpsGy7vLnkYxwYACTLPbGX3uLw8MUr6ZpJ+SpfVLktU4ycpr8dCkJkp6a
0qOpEeHsBDy74NkMOUa7Qrju7lJ2GiL70qqBwaPe+ubcUa3U/3WAsSekSzXgUwn8
Fap4r8wn7cUbxymAvO06RlU8YymuulAlyjwdo9gOL/Su/5POldss6dy1YuUtyq19
CD6NtkHqEUMsTc2cI+H65H44aEeckB1j0D2Grm2uMchAh0GcTSFVNF6jony++B8k
s2sL2dEw9/9vr0uc1TSVF5ezxaONuyaCXdYXUkkdyq3iNvfpRCg=
=aACq
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"For this release, we changed quite a few things.
Highlights:
- Fixed some long tail latency problems in the block allocator
- Removed some long deprecated (and for the past several years no-op)
mount options and ioctls
- Strengthened the extended attribute and directory verifiers
- Audited and fixed all the places where we could return EFSCORRUPTED
without logging anything
- Refactored the old SGI space allocation ioctls to make the
equivalent fallocate calls
- Fixed a race between fallocate and directio
- Fixed an integer overflow when files have more than a few
billion(!) extents
- Fixed a longstanding bug where quota accounting could be incorrect
when performing unwritten extent conversion on a freshly mounted fs
- Fixed various complaints in scrub about soft lockups and
unresponsiveness to signals
- De-vtable'd the directory handling code, which should make it
faster
- Converted to the new mount api, for better or for worse
- Cleaned up some memory leaks
and quite a lot of other smaller fixes and cleanups.
A more detailed summary:
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the
allocation request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never
been mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing
them to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio
corrupting the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to
reduce indirection penalties
- Ensure that dquots are attached to the inode when performing
unwritten extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks"
* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
xfs: allow parent directory scans to be interrupted with fatal signals
xfs: remove the mappedbno argument to xfs_da_get_buf
xfs: remove the mappedbno argument to xfs_da_read_buf
xfs: split xfs_da3_node_read
xfs: remove the mappedbno argument to xfs_dir3_leafn_read
xfs: remove the mappedbno argument to xfs_dir3_leaf_read
xfs: remove the mappedbno argument to xfs_attr3_leaf_read
xfs: remove the mappedbno argument to xfs_da_reada_buf
xfs: improve the xfs_dabuf_map calling conventions
xfs: refactor xfs_dabuf_map
xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
xfs: report corruption only as a regular error
xfs: Remove kmem_zone_free() wrapper
xfs: Remove kmem_zone_destroy() wrapper
xfs: Remove slab init wrappers
xfs: fix attr leaf header freemap.size underflow
xfs: fix some memory leaks in log recovery
xfs: fix another missing include
xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
xfs: remove duplicated include from xfs_dir2_data.c
...
These use the same scheme as the pre-existing mapping of the XFS
RESVP ioctls to ->falloc, so just extend it and remove the XFS
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick: fix compile error on s390]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
... and lose the ridiculous games with compat_alloc_user_space()
there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
casting to pointer to int, only to pass that to function that
takes pointer to void and uses it as pointer to structure is
really asking for trouble.
"Some pointer, I'm not sure what to" is spelled "void *",
not "int *"; use that.
And declare the functions we are passing that pointer to
as taking the pointer to what they really want to access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many drivers have ioctl() handlers that are completely compatible between
32-bit and 64-bit architectures, except for the argument that is passed
down from user space and may have to be passed through compat_ptr()
in order to become a valid 64-bit pointer.
Using ".compat_ptr = compat_ptr_ioctl" in file operations should let
us simplify a lot of those drivers to avoid #ifdef checks, and convert
additional drivers that don't have proper compat handling yet.
On most architectures, the compat_ptr_ioctl() just passes all arguments
to the corresponding ->ioctl handler. The exception is arch/s390, where
compat_ptr() clears the top bit of a 32-bit pointer value, so user space
pointers to the second 2GB alias the first 2GB, as is the case for native
32-bit s390 user space.
The compat_ptr_ioctl() function must therefore be used only with
ioctl functions that either ignore the argument or pass a pointer to a
compatible data type.
If any ioctl command handled by fops->unlocked_ioctl passes a plain
integer instead of a pointer, or any of the passed data types is
incompatible between 32-bit and 64-bit architectures, a proper handler
is required instead of compat_ptr_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v3: add a better description
v2: use compat_ptr_ioctl instead of generic_compat_ioctl_ptrarg,
as suggested by Al Viro
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Plumb a remap_flags argument through the {do,vfs}_clone_file_range
functions so that clone can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some anon_bdev filesystems (e.g. overlayfs, ceph) don't have s_blocksize
set. Returning zero from FIGETBSZ ioctl results in a Floating point
exception from the e2fsprogs utility filefrag, which divides the size of
the file with the value returned by FIGETBSZ.
Fix the interface by returning -EINVAL for these filesystems.
Fixes: d1d04ef857 ("ovl: stack file ops")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 031a072a0b ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.
The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.
It seems that commit 8ede205541 ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.
Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The user in control of a super block should be allowed to freeze
and thaw it. Relax the restrictions on the FIFREEZE and FITHAW
ioctls to require CAP_SYS_ADMIN in s_user_ns.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Using this helper allows us to avoid the in-kernel calls to the
sys_ioctl() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_ioctl().
After careful review, at least some of these calls could be converted
to do_vfs_ioctl() in future.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of including the full <linux/signal.h>, we are going to include the
types-only <linux/signal_types.h> header in <linux/sched.h>, to further
decouple the scheduler header from the signal headers.
This means that various files which relied on the full <linux/signal.h> need
to be updated to gain an explicit dependency on it.
Update the code that relies on sched.h's inclusion of the <linux/signal.h> header.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move sb_start_write()/sb_end_write() out of the vfs helper and up into the
ioctl handler.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FICLONE/FICLONERANGE ioctls return -EXDEV if src and dest
files are not on the same mount point.
Practically, clone only requires that src and dest files
are on the same file system.
Move the check for same mount point to ioctl handler and keep
only the check for same super block in the vfs helper.
A following patch is going to use the vfs_clone_file_range()
helper in overlayfs to copy up between lower and upper
mount points on the same file system.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Kirill A Shutemov reports that the kernel doesn't try to cap dest_count
in any way, and uses the number to allocate kernel memory. This causes
high order allocation warnings in the kernel log if someone passes in a
big enough value. We should clamp the allocation at PAGE_SIZE to avoid
stressing the VM.
The two existing users of the dedupe ioctl never send more than 120
requests, so we can safely clamp dest_range at PAGE_SIZE, because with
4k pages we can handle up to 127 dedupe candidates. Given the max
extent length of 16MB, we can end up doing 2GB of IO which is plenty.
[ Note: the "offsetof()" can't overflow, because 'count' is just a
16-bit integer. That's not obvious in the limited context of the
patch, so I'm noting it here because it made me go look. - Linus ]
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
