Both shwdt and rtc-sh are only supported on SH-3 and SH-4 at
the moment, don't allow them to break the SH-2 and SH-5 (sh64)
builds.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Adds support for periodic irq enabling in rtc-cmos. This could be used by
the ALSA driver and is already being tested with the zaptel ztdummy module.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add Texas Instruments TWL92330/Menelaus Power Management chip driver. This
includes voltage regulators, Dual slot memory card tranceivers and
real-time clock(RTC).
The support for RTC is integrated with this driver only; it is not separate
module. Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic"
(1/N second) IRQs. System wakeup alarms (from suspend-to-RAM) work too.
The battery keeps the RTC active over power off, so once you set clock
(rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will
behave as expected.
Cc: "Jean Delvare" <khali@linux-fr.org>
Cc: "Tony Lindgren" <tony@atomide.com>
Cc: "David Brownell" <david-b@pacbell.net>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the rtc-ds1307 driver into a "new style" driver.
Also improve probe() checks: be more correct about switching out of
AM/PM mode, and issue a (debug) diagnostic when failing due to bogus
register values.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we find a ds1337 or ds1339 with the oscillator powered off, turn it
on. If the oscillator fault flag was set, clear it and warn that the clock
needs to be set.
David Brownell: Bugfixes; provide corresponding update for ds1338, and the
core of the fix for ds1340. Use a common warning message ("SET TIME!")
whenever the clock needs to be set after oscillator fault (or oscillator
enable, if fault is not a separate status).
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a watchdog driver interface to rtc-m41t80 driver. This is derived from
works by Alexander Bigga <ab@mycable.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a new-style i2c driver for ST M41T80 series RTC chip, derived from
works by Alexander Bigga <ab@mycable.de> who wrote the original
rtc-m41txx.c based on drivers/i2c/chips/m41t00.c driver.
This driver supports M41T8[0-4] and M41ST8[457]. The old m41t00 driver
supports M41T00, M41T81 and M41T85(M41ST85). While the M41T00 chip is now
supported by rtc-ds1307 driver, this driver does not include support for
the chip.
[akpm@linux-foundation.org: remove bogus `static']
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Alexander Bigga <ab@mycable.de>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minor fix to the Kconfig for RTCs: don't display section headers for I2C or
SPI unless they're configured. And depend on SPI_MASTER; having slave
support wouldn't help.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested on the AT32AP7000/ATSTK1000. Driver does only suport time, wake up
and a very simple alarm, because of hardware limitations.
Hardware documentation can be found in the AT32AP7000 data sheet, which can
be downloaded from
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
From: David Brownell <david-b@pacbell.net>
- Strike some alarm setup code that's no longer needed.
(This patch seems to have gotten lost somewhere...)
- Make the driver name (and its module alias) match what
the platform setup code uses, so the driver can bind
and hotplug.
[akpm@linux-foundation.org: fix several checkpatch.pl warnings]
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert rtc-rs5c372 to be a "new style" I2C driver, and update the
Kconfig text to be more complete..
Verified on an OMAP H4 development platform, along with a board
init patch to declare its rv5c387a device.
Only one defconfig -- powerpc/linkstation -- uses this driver; but
several other platforms use it, just without defconfig support.
Such platforms need to be converted so (a) their I2C adapter driver
supports new-style drivers, and (b) board init code declares this
I2C device.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Voipio Riku <Riku.Voipio@movial.fi>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This updates the rtc-ds1307 driver so that converting it to a "new style"
driver (driver model, not legacy i2c model) will involve fewer changes.
- Use pointer to i2c_client almost everywhere, so that it's easy
to let the i2c core create that object;
- Avoid using i2c_client.adapter, since that field is redundant and
thus may go away (same object as i2c_client.dev.parent).
- Extend type enum to include various RTCs this is expected to
work with, and include register support for them.
It also cleans up the support for multiple chip types, and fixes a
glitch that could appear with an un-initialized RTC.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
[POWERPC] Create add_rtc() function to enable the RTC CMOS driver
[POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
[POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
[POWERPC] Oprofile support for Power 5++
[POWERPC] Enable arbitary speed tty ioctls and split input/output speed
[POWERPC] Make drivers/char/hvc_console.c:khvcd() static
[POWERPC] Remove dead code for preventing pread() and pwrite() calls
[POWERPC] Remove unnecessary #undef printk from prom.c
[POWERPC] Fix typo in Ebony default DTS
[POWERPC] Check for NULL ppc_md.init_IRQ() before calling
[POWERPC] Remove extra return statement
[POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
[POWERPC] pasemi: Rename platform
[POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
[POWERPC] Add __read_mostly support for powerpc
[POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
[POWERPC] Create a dummy zImage if no valid platform has been selected
[POWERPC] PS3: Bootwrapper support.
[POWERPC] powermac i2c: Use mutex
[POWERPC] Schedule removal of arch/ppc
...
Fixed up conflicts manually in:
Documentation/feature-removal-schedule.txt
arch/powerpc/kernel/pci_32.c
arch/powerpc/kernel/pci_64.c
include/asm-powerpc/pci.h
and asked the powerpc people to double-check the result..
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
sysfs: make directory dentries and inodes reclaimable
sysfs: implement sysfs_get_dentry()
sysfs: move sysfs_drop_dentry() to dir.c and make it static
sysfs: restructure add/remove paths and fix inode update
sysfs: use sysfs_mutex to protect the sysfs_dirent tree
sysfs: consolidate sysfs spinlocks
sysfs: make kobj point to sysfs_dirent instead of dentry
sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()
sysfs: implement SYSFS_FLAG_REMOVED flag
sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags
sysfs: make sysfs_drop_dentry() access inodes using ilookup()
sysfs: Fix oops in sysfs_drop_dentry on x86_64
sysfs: use singly-linked list for sysfs_dirent tree
sysfs: slim down sysfs_dirent->s_active
sysfs: move s_active functions to fs/sysfs/dir.c
sysfs: fix root sysfs_dirent -> root dentry association
sysfs: use iget_locked() instead of new_inode()
sysfs: reorganize sysfs_new_indoe() and sysfs_create()
sysfs: fix parent refcounting during rename and move
...
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Rename PC speaker code
[MIPS] Don't use genrtc.
[MIPS] Remove unused time.c for swarm
[MIPS] Sparse: Use NULL for pointer
[MIPS] Fix a sparse warning in arch/mips/pci/pci.c
[MIPS] SMTC: Interrupt mask backstop hack
[MIPS] separate platform_device registration for VR41xx RTC
[MIPS] Separate platform_device registration for VR41xx GPIO
[MIPS] MIPSsim: Fix build.
[MIPS] separate platform_device registration for VR41xx serial interface
[MIPS] Include cacheflush.h in uncache.c
[MIPS] Cleanup tlbdebug.h
[MIPS] Change names of local variables to silence sparse (part 2)
[MIPS] Workaround for a sparse warning in include/asm-mips/io.h
[MIPS] RM: Use only phyiscal address for 82596 and 53c710
[MIPS] Hydrogen3: Remove remaining bits of code.
[MIPS] DEC: Fix modpost warning.
Revert "[MIPS] DEC: Fix modpost warning."
[MIPS] Fix resume for 64K page size on R4000 class processors.
The x1205 driver moved to the RTC subsystem and was significantly
modified since then, so just delete the outdated documentation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Well, first of all, I don't want to change so many files either.
What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.
In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(
Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)
Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.
Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.
This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.
For more info regarding lifetime rule cleanup, please read the
following message.
http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The powerpc arch uses CONFIG_PPC instead of CONFIG_POWERPC. This fixes
drivers/rtc/Kconfig to use the correct config option.
Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Intel Macs (and possibly other machines) provide a PNP entry for the RTC,
but provide no IRQ. As a result the rtc-cmos driver doesn't allow wakeup
alarms. If the RTC is located at the legacy ioport range, assume that it's
on IRQ 8 unless the tables say otherwise.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make drivers/rtc/Kconfig be clearer about what the various "interfaces"
actually mean, by showing path names.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typo which breaks build. How did that happen?
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits)
[MIPS] Rework cobalt_board_id
[MIPS] Use RTC_CMOS for Cobalt
[MIPS] Use platform_device for Cobalt UART
[MIPS] Separate Alchemy processor based boards config
[MIPS] Fix build error in atomic64_cmpxchg
[MIPS] Run checksyscalls for N32 and O32 ABI
[MIPS] tlbex: use __maybe_unused
[MIPS] excite: use __maybe_unused
[MIPS] Add extern cobalt_board_id
[MIPS] Remove unused CONFIG_TOSHIBA_BOARDS
[MIPS] Rename tb0229_defconfig to tb0219_defconfig
[MIPS] Update tb0229_defconfig; add CONFIG_GPIO_TB0219.
[MIPS] Add minimum defconfig for RBHMA4200
[MIPS] SB1: Build fix.
[MIPS] Drop __devinit tag from allocate_irqno() and free_irqno()
[MIPS] clocksource: use CLOCKSOURCE_MASK() macro
[MIPS] Remove LIMITED_DMA support
[MIPS] Remove Momenco Jaguar ATX support
[MIPS] Remove Momenco Ocelot G support
[MIPS] FPU hazard handling
...
Add error processing. Hanging up by an infinite loop is evaded.
Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable some more menus in the configuration files that are of no
interest to a s390 machine.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When the rtc_update_irq() callsites stopped passing in the
class_dev, the rtc_dev references weren't fixed. Fix it up,
so we pass in the proper pointer.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Replace CONFIG_PNPACPI with CONFIG_PNP, so it loads on ACPI-less PNPBIOS
systems.
Signed-off-by: Marko Vrh <mvrh@freeshells.ch>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a common glitch in how RTC drivers handle two "set alarm" modes,
by getting rid of the surprising/hidden one that was rarely implemented
correctly (and which could expose nonportable hardware-specific behavior).
The glitch comes from the /dev/rtcX logic implementing the legacy
RTC_ALM_SET (limited to 24 hours, needing RTC_AIE_ON) ioctl on top of the
RTC driver call providing access to the newer RTC_WKALM_SET (without those
limitations) by initializing the day/month/year fields to be invalid ...
that second mode.
Now, since few RTC drivers check those fields, and most hardware misbehaves
when faced with invalid date fields, many RTC drivers will set bogus alarm
times on those RTC_ALM_SET code paths. (Several in-tree drivers have that
issue, and I also noticed it with code reviews on several new RTC drivers.)
This patch ensures that RTC drivers never see such invalid alarm fields, by
moving some logic out of rtc-omap into the RTC_ALM_SET code and adding an
explicit check (which will prevent the issue on other code paths).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David says "884b4aaaa242a2db8c8252796f0118164a680ab5 should be reverted. It
added an rtc_merge_alarm() call to the 2.6.20 kernel, which hasn't yet been
used by any in-tree driver; this patch obviates the need for that call, and
uses a more robust approach."
Cc: Scott Wood <scottwood@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I finally got around to testing the updated wakeup event hooks for rtc-cmos,
and they follow in two patches:
- Interface update ... when a simple enable_irq_wake() doesn't suffice,
the platform data can hold suspend/resume callback hooks.
- ACPI implementation ... provides callback hooks to do ACPI magic, and
eliminate the legacy /proc/acpi/alarm file.
The interface update could go into 2.6.21, but that's not essential; they
will be NOPs on most PCs, without the ACPI stuff.
I suspect the ACPI folk may have opinions about how to merge that second
patch, and how to obsolete that legacy procfs file. I'd like to see that
merge into 2.6.22 if possible...
As for how to kick it in ... two ways:
- The appended "rtcwake" program; updated since the last time it was
posted, it deals much better with timezones and DST.
- Write the /sys/class/rtc/.../wakealarm file, then go to sleep.
For some reason RTC wake from "swsusp" stopped working on a system where
it previously worked; the alarm setting appears to get clobbered. But
on the bright side, RTC wake from "standby" worked on a system that had
never been able to resume from that state before ... IDEACPI is my guess
as to why it finally started to work. It's the old "two steps forward,
one step back" dance, I guess.
- Dave
/* gcc -Wall -Os -o rtcwake rtcwake.c */
#include <stdio.h>
#include <getopt.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <time.h>
#include <sys/ioctl.h>
#include <sys/time.h>
#include <sys/types.h>
#include <linux/rtc.h>
/* constants from legacy PC/AT hardware */
#define RTC_PF 0x40
#define RTC_AF 0x20
#define RTC_UF 0x10
/*
* rtcwake -- enter a system sleep state until specified wakeup time.
*
* This uses cross-platform Linux interfaces to enter a system sleep state,
* and leave it no later than a specified time. It uses any RTC framework
* driver that supports standard driver model wakeup flags.
*
* This is normally used like the old "apmsleep" utility, to wake from a
* suspend state like ACPI S1 (standby) or S3 (suspend-to-RAM). Most
* platforms can implement those without analogues of BIOS, APM, or ACPI.
*
* On some systems, this can also be used like "nvram-wakeup", waking
* from states like ACPI S4 (suspend to disk). Not all systems have
* persistent media that are appropriate for such suspend modes.
*
* The best way to set the system's RTC is so that it holds the current
* time in UTC. Use the "-l" flag to tell this program that the system
* RTC uses a local timezone instead (maybe you dual-boot MS-Windows).
*/
static char *progname;
#ifdef DEBUG
#define VERSION "1.0 dev (" __DATE__ " " __TIME__ ")"
#else
#define VERSION "0.9"
#endif
static unsigned verbose;
static int rtc_is_utc = -1;
static int may_wakeup(const char *devname)
{
char buf[128], *s;
FILE *f;
snprintf(buf, sizeof buf, "/sys/class/rtc/%s/device/power/wakeup",
devname);
f = fopen(buf, "r");
if (!f) {
perror(buf);
return 0;
}
fgets(buf, sizeof buf, f);
fclose(f);
s = strchr(buf, '\n');
if (!s)
return 0;
*s = 0;
/* wakeup events could be disabled or not supported */
return strcmp(buf, "enabled") == 0;
}
/* all times should be in UTC */
static time_t sys_time;
static time_t rtc_time;
static int get_basetimes(int fd)
{
struct tm tm;
struct rtc_time rtc;
/* this process works in RTC time, except when working
* with the system clock (which always uses UTC).
*/
if (rtc_is_utc)
setenv("TZ", "UTC", 1);
tzset();
/* read rtc and system clocks "at the same time", or as
* precisely (+/- a second) as we can read them.
*/
if (ioctl(fd, RTC_RD_TIME, &rtc) < 0) {
perror("read rtc time");
return 0;
}
sys_time = time(0);
if (sys_time == (time_t)-1) {
perror("read system time");
return 0;
}
/* convert rtc_time to normal arithmetic-friendly form,
* updating tm.tm_wday as used by asctime().
*/
memset(&tm, 0, sizeof tm);
tm.tm_sec = rtc.tm_sec;
tm.tm_min = rtc.tm_min;
tm.tm_hour = rtc.tm_hour;
tm.tm_mday = rtc.tm_mday;
tm.tm_mon = rtc.tm_mon;
tm.tm_year = rtc.tm_year;
tm.tm_isdst = rtc.tm_isdst; /* stays unspecified? */
rtc_time = mktime(&tm);
if (rtc_time == (time_t)-1) {
perror("convert rtc time");
return 0;
}
if (verbose) {
if (!rtc_is_utc) {
printf("\ttzone = %ld\n", timezone);
printf("\ttzname = %s\n", tzname[daylight]);
gmtime_r(&rtc_time, &tm);
}
printf("\tsystime = %ld, (UTC) %s",
(long) sys_time, asctime(gmtime(&sys_time)));
printf("\trtctime = %ld, (UTC) %s",
(long) rtc_time, asctime(&tm));
}
return 1;
}
static int setup_alarm(int fd, time_t *wakeup)
{
struct tm *tm;
struct rtc_wkalrm wake;
tm = gmtime(wakeup);
wake.time.tm_sec = tm->tm_sec;
wake.time.tm_min = tm->tm_min;
wake.time.tm_hour = tm->tm_hour;
wake.time.tm_mday = tm->tm_mday;
wake.time.tm_mon = tm->tm_mon;
wake.time.tm_year = tm->tm_year;
wake.time.tm_wday = tm->tm_wday;
wake.time.tm_yday = tm->tm_yday;
wake.time.tm_isdst = tm->tm_isdst;
/* many rtc alarms only support up to 24 hours from 'now' ... */
if ((rtc_time + (24 * 60 * 60)) > *wakeup) {
if (ioctl(fd, RTC_ALM_SET, &wake.time) < 0) {
perror("set rtc alarm");
return 0;
}
if (ioctl(fd, RTC_AIE_ON, 0) < 0) {
perror("enable rtc alarm");
return 0;
}
/* ... so use the "more than 24 hours" request only if we must */
} else {
/* avoid an extra AIE_ON call */
wake.enabled = 1;
if (ioctl(fd, RTC_WKALM_SET, &wake) < 0) {
perror("set rtc wake alarm");
return 0;
}
}
return 1;
}
static void suspend_system(const char *suspend)
{
FILE *f = fopen("/sys/power/state", "w");
if (!f) {
perror("/sys/power/state");
return;
}
fprintf(f, "%s\n", suspend);
fflush(f);
/* this executes after wake from suspend */
fclose(f);
}
int main(int argc, char **argv)
{
static char *devname = "rtc0";
static unsigned seconds = 0;
static char *suspend = "standby";
int t;
int fd;
time_t alarm = 0;
progname = strrchr(argv[0], '/');
if (progname)
progname++;
else
progname = argv[0];
if (chdir("/dev/") < 0) {
perror("chdir /dev");
return 1;
}
while ((t = getopt(argc, argv, "d:lm:s:t:uVv")) != EOF) {
switch (t) {
case 'd':
devname = optarg;
break;
case 'l':
rtc_is_utc = 0;
break;
/* what system power mode to use? for now handle only
* standardized mode names; eventually when systems define
* their own state names, parse /sys/power/state.
*
* "on" is used just to test the RTC alarm mechanism,
* bypassing all the wakeup-from-sleep infrastructure.
*/
case 'm':
if (strcmp(optarg, "standby") == 0
|| strcmp(optarg, "mem") == 0
|| strcmp(optarg, "disk") == 0
|| strcmp(optarg, "on") == 0
) {
suspend = optarg;
break;
}
printf("%s: unrecognized suspend state '%s'\n",
progname, optarg);
goto usage;
/* alarm time, seconds-to-sleep (relative) */
case 's':
t = atoi(optarg);
if (t < 0) {
printf("%s: illegal interval %s seconds\n",
progname, optarg);
goto usage;
}
seconds = t;
break;
/* alarm time, time_t (absolute, seconds since 1/1 1970 UTC) */
case 't':
t = atoi(optarg);
if (t < 0) {
printf("%s: illegal time_t value %s\n",
progname, optarg);
goto usage;
}
alarm = t;
break;
case 'u':
rtc_is_utc = 1;
break;
case 'v':
verbose++;
break;
case 'V':
printf("%s: version %s\n", progname, VERSION);
break;
default:
usage:
printf("usage: %s [options]"
"\n\t"
"-d rtc0|rtc1|...\t(select rtc)"
"\n\t"
"-l\t\t\t(RTC uses local timezone)"
"\n\t"
"-m standby|mem|...\t(sleep mode)"
"\n\t"
"-s seconds\t\t(seconds to sleep)"
"\n\t"
"-t time_t\t\t(time to wake)"
"\n\t"
"-u\t\t\t(RTC uses UTC)"
"\n\t"
"-v\t\t\t(verbose messages)"
"\n\t"
"-V\t\t\t(show version)"
"\n",
progname);
return 1;
}
}
if (!alarm && !seconds) {
printf("%s: must provide wake time\n", progname);
goto usage;
}
/* REVISIT: if /etc/adjtime exists, read it to see what
* the util-linux version of hwclock assumes.
*/
if (rtc_is_utc == -1) {
printf("%s: assuming RTC uses UTC ...\n", progname);
rtc_is_utc = 1;
}
/* this RTC must exist and (if we'll sleep) be wakeup-enabled */
fd = open(devname, O_RDONLY);
if (fd < 0) {
perror(devname);
return 1;
}
if (strcmp(suspend, "on") != 0 && !may_wakeup(devname)) {
printf("%s: %s not enabled for wakeup events\n",
progname, devname);
return 1;
}
/* relative or absolute alarm time, normalized to time_t */
if (!get_basetimes(fd))
return 1;
if (verbose)
printf("alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n",
alarm, sys_time, rtc_time, seconds);
if (alarm) {
if (alarm < sys_time) {
printf("%s: time doesn't go backward to %s",
progname, ctime(&alarm));
return 1;
}
alarm += sys_time - rtc_time;
} else
alarm = rtc_time + seconds + 1;
if (setup_alarm(fd, &alarm) < 0)
return 1;
sync();
printf("%s: wakeup from \"%s\" using %s at %s",
progname, suspend, devname,
ctime(&alarm));
fflush(stdout);
usleep(10 * 1000);
if (strcmp(suspend, "on") != 0)
suspend_system(suspend);
else {
unsigned long data;
do {
t = read(fd, &data, sizeof data);
if (t < 0) {
perror("rtc read");
break;
}
if (verbose)
printf("... %s: %03lx\n", devname, data);
} while (!(data & RTC_AF));
}
if (ioctl(fd, RTC_AIE_OFF, 0) < 0)
perror("disable rtc alarm interrupt");
close(fd);
return 0;
}
This patch:
Make rtc-cmos do the relevant magic so this RTC can wake the system from a
sleep state. That magic comes in two basic flavors:
- Straightforward: enable_irq_wake(), the way it'd work on most SOC chips;
or generally with system sleep states which don't disable core IRQ logic.
- Roundabout, using non-IRQ platform hooks. This is needed with ACPI and
one almost-clone chip which uses a special wakeup-only alarm. (That's
the RTC used on Footbridge boards, FWIW, which don't do PM in Linux.)
A separate patch implements those hooks for ACPI platforms, so that rtc_cmos
can issue system wakeup events (and its sysfs "wakealarm" attribute works on
at least some systems).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a goof in the revised classdev support for RTCs: make sure the /dev
node info is ready before the device is registered, not after. Otherwise
the /sys/class/rtc/rtcN/dev attribute won't be created and then udev won't
have the information it needs to create the /dev/rtcN node.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RTC class suspend/resume support, re-initializing the system clock on resume
from the clock used to initialize it at boot time.
- The reinit-on-resume is hooked to the existing RTC_HCTOSYS config
option, on the grounds that a clock good enough for init must also
be good enough for re-init.
- Inlining a version of the code used by ARM, to save and restore the
delta between a selected RTC and the current system wall-clock time.
- Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs. This
means that systems using those RTCs across suspend/resume will likely
want to change their kernel configs to enable RTC_HCTOSYS.
If HCTOSYS isn't using a second RTC (with battery?), this changes the
system's initial date from Jan 1970 to the epoch this hardware uses:
1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc.
This goes on top of the patch series removing "struct class_device" usage
from the RTC framework. That's all needed for class suspend()/resume().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This simplifies the RTC procfs support by removing the class_interface that
hooks it into the rtc core. If it's configured, then sysfs support is now
part of the RTC core, and is never a separate module.
It also removes the class_interface hook, now that its last remaining user is
gone. (That API is usable only with a "struct class_device".)
It's another step towards being able to remove "struct class_device".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This simplifies the RTC sysfs support by removing the class_interface that
hooks it into the rtc core. If it's configured, then sysfs support is now
part of the RTC core, and is never a separate module.
It's another step towards being able to remove "struct class_device".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes class_device from the programming interface that the RTC
framework exposes to the rest of the kernel. Now an rtc_device is passed,
which is more type-safe and streamlines all the relevant code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This simplifies the /dev support by removing a superfluous class_device (the
/sys/class/rtc-dev stuff) and the class_interface that hooks it into the rtc
core. Accordingly, if it's configured then /dev support is now part of the
RTC core, and is never a separate module.
It's another step towards being able to remove "struct class_device".
[bunk@stusta.de: drivers/rtc/rtc-dev.c should #include "rtc-core.h"]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch implements the driver necessary use the Analog Devices Blackfin
processor's on-chip RTC controller.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lockdep reported cmos_suspend() and cmos_resume() calling rtc_update_irq()
with IRQs enabled; not allowed.
Also fix problems seen on some hardware, whereby false alarm IRQs could be
reported (primarily to userspace); and update two comments to match changes
in ACPI. Those make up most of this patch, by volume.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the I2C bus address, as per drivers/acorn/char/pcf8583.c.
Also, since this driver also contains Acorn RiscPC specific code
for obtaining the current year from the SRAM (and updating the
platform specific checksum when writing new data back) this is
NOT a platform independent driver.
Document it as such, and update the dependencies to reflect this
fact.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Both BCD_TO_BIN(x) and BIN_TO_BCD(x) have an unexpected side-effect -
not only do they return the value as expected, they _modify_ their
argument in the process.
Let's play it safe and avoid these macros.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix an oops on the rtc_device_unregister() path by waiting until the last
moment before nulling the rtc->ops vector. Fix some potential oopses by
having the rtc_class_open()/rtc_class_close() interface increase the RTC's
reference count while an RTC handle is available outside the RTC framework.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Various bug fixes to the at91rm9200 RTC:
- alarm: setalarm() should pay attention to the "enabled" flag
- init: cleaner handling of the wakeup flags, which cpu init should
really have set up. Doing it here is just a workaround.
- linkage: since the at91_rtc driver probe() routine is in the init
section, it should use platform_driver_probe() instead of leaving
that pointer around in the driver struct after init section removal.
- linkage: likewise, remove() belongs in the exit section.
Among other things, the init and alarm changes ensure that this driver
handles the new sysfs "wakealarm" attribute properly.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some rtc-sa1100 bugfixes:
- The read_alarm() method reports the rtc_wkalrm.enabled field properly.
This patch is already in the handhelds.org tree.
- And the set_alarm() method now handles that flag correctly, rather than
making mismatched {en,dis}able_irq_wake() calls, which trigger runtime
warning messages. (Those calls are best made in suspend/resume methods.)
Note that while this SA1100/PXA RTC is fully capable of waking those ARM
processors from sleep states, that mechanism isn't properly supported on
either processor family, or in this driver. Some boards have board-specific
PM glue providing partial workarounds for the weak generic PM support.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This option is useful for all of the X86 subarchs afaik (and especially
X86_GENERICARCH).
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stop using i2c_adapter.class_dev, as it is going to be removed
soon. Luckily, there are only 4 RTC drivers affected.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a new "wakealarm" sysfs attribute to RTC class devices which support
alarm operations and are wakeup-capable:
- It reads as either empty, or the scheduled alarm time as seconds
since the POSIX epoch. (That time may already have passed, since
nothing currently enforces one-shot alarm semantics.)
- It can be written with an alarm time in the future, again seconds
since the POSIX epoch, which enables the alarm.
- It can be written with an alarm time not in the future (such as 0,
the start of the POSIX epoch) to disable the alarm.
Usage examples (some need GNU date) after "cd /sys/class/rtc/rtcN":
alarm after 10 minutes:
# echo $(( $(cat since_epoch) + 10 * 60 )) > wakealarm
alarm tuesday evening 10pm:
# date -d '10pm tuesday' "+%s" > wakealarm
disable alarm:
# echo 0 > wakealarm
This resembles the /proc/acpi/alarm file in that nothing happens when the
alarm triggers ... except possibly waking the system from sleep. It's also
like that in a nasty way: not much can be done to prevent one task from
clobbering another task's alarm settings.
It differs from that file in that there's no in-kernel date parser.
Note that a few RTCs ignore rtc_wkalrm.enabled when setting alarms, or aren't
set up correctly, so they won't yet behave with this attribute.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an "RTC framework" driver for the "CMOS" RTCs which are standard on
PCs and some other platforms. That's MC146818 compatible silicon.
Advantages of this vs. drivers/char/rtc.c (use one _or_ the other, only
one will be able to claim the RTC irq) include:
- This leverages both the new RTC framework and the driver model; both
PNPACPI and platform device modes are supported. (A separate patch
creates a platform device on PCs where PNPACPI isn't configured.)
- It supports common extensions like longer alarms. (A separate patch
exports that information from ACPI through platform_data.)
- Likewise, system wakeup events use "real driver model support", with
policy control via sysfs "wakeup" attributes and and using normal rtc
ioctls to manage wakeup. (Patch in the works. The ACPI hooks are
known; /proc/acpi/alarm can vanish. Making it work with EFI will
be a minor challenge to someone with e.g. a MiniMac.)
It's not yet been tested on non-x86 systems, without ACPI, or with HPET.
And the RTC framework will surely have teething pains on "mainstream"
PC-based systems (though must embedded Linux systems use it heavily), not
limited to sorting out the "/dev/rtc0" issue (udev easily tweaked). Also,
the ALSA rtctimer code doesn't use the new RTC API.
Otherwise, this should be a no-known-regressions replacement for the old
drivers/char/rtc.c driver, and should help the non-embedded distros (and
the new timekeeping code) start to switch to the framework.
Note also that any systems using "rtc-m48t86" are candidates to switch over
to this more functional driver; the platform data is different, and the way
bytes are read is different, but otherwise those chips should be compatible.
[akpm@osdl.org: sparc32 fix]
[akpm@osdl.org: sparc64 fix]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Woody Suwalski <woodys@xandros.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The usage of the century bit was inverted on 2.6.19 following to PCF8563's
description, but it was not match to usage suggested by RTC8564's
datasheet. Anyway what MO_C=1 means can vary on each platform. This patch
is to detect its polarity in get_datetime routine. The default value of
c_polarity is 0 (MO_C=1 means 19xx) so that this patch does not change
current behavior even if get_datetime was not called before set_datetime.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@teamlog.com>
Cc: <stable@kernel.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc_sysfs_add_device is needed even after dev initialization, so drop __devinit.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the SH rtc driver correctly act on the "enabled" flag when
setting an alarm.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the SH rtc driver to
(a) correctly report 'enabled' status with other alarm status;
(b) not duplicate that status in its procfs dump
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bugfixes:
- Handle RTCs which are configured to use 12-hour mode.
- Never report bogus/un-initialized times.
- Displaying "raw trim" requires not masking it first!
- Fix the sysfs and procfs display of crystal and trim data.
Features:
- Handle other RTCs in this family, notably rv5c386/rv5c387.
- Declare the other registers.
- Provide alarm get/set functionality.
- Handle AIE and UIE; but no IRQ handling yet.
Cleanup:
- Shrink object by not including needless sysfs or procfs support
- We don't need no steenkin' forward declarations. (Except one.)
Until the I2C framework merges "new style" driver support, matching
the driver model better, using rv5c chips or alarm IRQs requires a
separate board-specific patch. (And an IRQ handler, handing off labor
through a work_struct...)
This uses the "method 3" register reads, but notes that it's done
to work around an evident i2c adapter driver bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The at91rm9200 RTC driver needs some assistance to build, because of recent
header file rearrangement.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use
the traditional name (from drivers/char/rtc.c and many other places) of
"alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which
originated that reporting API).
Also, update a few of the RTC drivers to stop providing that duplicate status,
and/or to expose it properly when reporting the alarm state. We really don't
want every RTC driver doing their own thing here...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This removes some syslog spam as RTC drivers register; debug messages
shouldn't come out at "info" level.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds alarm support for the RTC_ALM_SET, RTC_ALM_READ,
RTC_WKALM_SET and RTC_WKALM_RD operations to rtc-sh.
The only unusual part is the handling of the alarm interrupt. If you
clear the alarm flag (AF) while the time in the RTC still matches the
time in the alarm registers than AF is immediately re-set, and if the
alarm interrupt (AIE) is still enabled then it re-triggers. I was
originally getting around 20k+ interrupts generated during the second
when the RTC and alarm registers matches.
The solution I've used is to clear AIE when the alarm goes off and
then use the carry interrupt to re-enabled it. The carry interrupt
will check AF and re-enabled AIE if it's clear. If AF is not clear
it'll clear it and then the check will be repeated next carry
interrupt. This a bit in rtc structure that indicates that it's
waiting to have AIE re-enabled so it doesn't turn it on when it
wasn't enabled anyway.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The RMONCNT register, which holds the month in the RTC, takes a value
between 1 and 12 while the tm_mon field in the time structures takes
a value between 0 and 11. This wasn't being taken into account in
rtc-sh resulting in the month being out by one.
eg, on my board during boot the RTC is set to:
RTC is set to Thu Jul 01 09:00:00 1999
but "hwclock -r" immediately after logging in was showing:
Sun Aug 1 09:01:43 1999 0.000000 seconds
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
When testing the per second interrupt support (RTC_UIE_ON/RTC_UIE_OFF)
of the new RTC system it would die in sh_rtc_interrupt due to a null
ptr dereference. The following gets it working correctly.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The new Atmel AT91SAM9261 and AT91SAM9260 processors do not have the
internal RTC peripheral. This RTC driver is therefore
AT91RM9200-specific.
This patch renames rtc-at91.c to rtc-at91rm9200.c, and changes the name
of the configuration option.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update more I2C drivers that live outside drivers/i2c to understand that using
adapter->dev is not The Way. When actually referring to the adapter hardware,
adapter->class_dev.dev is the answer. When referring to a device connected to
it, client->dev.dev is the answer.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add rtc_merge_alarm(), which can be used by rtc drivers to turn a partially
specified alarm expiry (i.e. most significant fields set to -1, as with the
RTC_ALM_SET ioctl()) into a fully specified expiry.
If the most significant specified field is earlier than the current time, the
least significant unspecified field is incremented.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The real time clocks ds1742 and ds1743 differs only in the size of the
nvram. This patch changes the existing ds1742 driver to support also
ds1743. The main change is that the nvram size is determined from the
resource attached to the device.
The patch have benefitted from suggestions from Atsushi Nemeto, who is the
author of the ds1742 driver.
Signed-off-by: Torsten Rasmussen Rasmussen <tr@newtec.dk>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
According to the datasheet rs5c372 supports three different methods for
reading register values. Change from method #1 to method #3, since method #3
is the only one that works on Thecus N2100 board with this RTC.
Signed-off-by: Riku Voipio <riku.voipio@movial.fi>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This creates a new RTC-framework driver for the RTC/calendar module found
in various OMAP1 chips. (OMAP2 and OMAP3 use external RTCs, like those in
TI's multifunction PM companion chips.) It's been in the Linux-OMAP tree
for several months now, and other trees before that, so it's quite stable.
The most notable issue is that the OMAP IRQ code doesn't yet support the
RTC IRQ as a wakeup event. Once that's fixed, a patch will be needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Conflicts:
drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c
Fix up merge failures with Linus's head and fix new compilation failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
The correct order is: NULL check before dereference
This was a guaranteed NULL dereference with debugging enabled since
rs5c372_sysfs_show_osc() does actually pass NULL...
Spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I got a lockdep warning when running "rtctest" so I though it'd be good
to see what was up.
- The warning was for rtc->irq_task_lock, gotten from rtc_update_irq()
by irq handlerss ... but in a handful of other cases, grabbed without
blocking IRQs.
- Some callers to rtc_update_irq() were not ensuring IRQs were blocked,
yet the routine expects that; make sure all callers block IRQs.
It would appear that RTC API tests haven't been part of anyone's kernel
regression test suite recently, at least not with lockdep running.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The RTC framework has an irq_set_freq() method that should be used to manage
the periodic IRQ frequency, but the current ioctl logic doesn't know how to do
that. This patch teaches it how.
This means that drivers implementing irq_set_freq() will automatically support
RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the
driver.
[akpm@osdl.org: export rtc_irq_set_freq]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With 64-bit resources on 32-bit platforms, the resource address might be
larger than a void*. Fix printk to work regardless of resource size.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
Remove all inclusions of <linux/config.h>
Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.
Fix obvious build breakage revealed by 'make allyesconfig'
in current -git.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
