[Why]
The only place where state->max_bpc is updated on the connector is
at the start of atomic check during drm_atomic_connector_check. It
isn't updated when adding the connectors to the atomic state after
the fact. It also doesn't necessarily reflect the right value when
called in amdgpu during mode validation outside of atomic check.
This can cause the wrong bpc to be used even if the max_requested_bpc
is the correct value.
[How]
Don't rely on state->max_bpc reflecting the real bpc value and just
do the min(...) based on display info bpc and max_requested_bpc.
Fixes: 01933ba42d ("drm/amd/display: Use current connector state if NULL when checking bpc")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error out if the AMDGPU_CS ioctl is called with multiple SYNCOBJ_OUT and/or
TIMELINE_SIGNAL chunks, since otherwise the last chunk wins while the
allocated array as well as the reference counts of sync objects are leaked.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB PG for navi10 according to the production requirement.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix size type errors, from uint32_t to uint16_t.
it will cause only initializes the highest 16 bits in
smu_get_atom_data_table function.
bug report:
This fixes the following static checker warning.
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:390 smu_v11_0_setup_pptable()
warn: passing casted pointer '&size' to 'smu_get_atom_data_table()' 32 vs 16.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set certain power gating flags after we determine
if the firmware version is sufficient to support gfxoff.
Previously we set the pg flags in early init, but we later
we might have disabled gfxoff if the firmware versions didn't
support it. Move adding the additional pg flags after we
determine whether or not to support gfxoff.
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdXX+WAAoJEL/70l94x66DmBoH/RT2qD8Z16Nwlz/8XbFmUCtb
4B0eCaiTpnmDuF2T9nghMitg/CHjFHJJK7bLSkq9C4Fb9HTEfDabb4TRMENOVTB3
u9bK2s+/WG2uWKt1rP6uhSgVumwPQ/5JY30N59nEZ+ZgY6bJ+U3pUfZnPb4FeaVi
EKYXDeToEXWVHJyv+HpkJ+2YV7gQ43qZO3x6papzPAbJp5yN7YDETDylPLF7y7CL
njZ+8z4HaVoJH/T3E2wySEcFO2W9Pc7YH8fIFbvGmPMuOMB5AabBj3mnq/38qsVn
n/SPMrq81DqNH9xeCQXR/7NdPr0ifx830K74pHJ/uCcwHjzB9KWSkv8lbyBPuEU=
=zArX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A couple bugfixes, and mostly selftests changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/kvm: make platform_info_test pass on AMD
Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"
selftests: kvm: fix state save/load on processors without XSAVE
selftests: kvm: fix vmx_set_nested_state_test
selftests: kvm: provide common function to enable eVMCS
selftests: kvm: do not try running the VM in vmx_set_nested_state_test
KVM: x86: svm: remove redundant assignment of var new_entry
MAINTAINERS: add KVM x86 reviewers
MAINTAINERS: change list for KVM/s390
kvm: x86: skip populating logical dest map if apic is not sw enabled
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state
is undefined after that so an attempt to launch this guest again from
test_msr_platform_info_enabled() fails. Reorder the tests to make test
pass.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cache containerization.
-----BEGIN PGP SIGNATURE-----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=irn8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.3-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fix nfsd bugs: three in the new nfsd/clients/ code, one in the reply
cache containerization"
* tag 'nfsd-5.3-1' of git://linux-nfs.org/~bfields/linux:
nfsd4: Fix kernel crash when reading proc file reply_cache_stats
nfsd: initialize i_private before d_add
nfsd: use i_wrlock instead of rcu for nfsdfs i_private
nfsd: fix dentry leak upon mkdir failure.
If rs_prepare_reshape() fails, no cleanup is executed, leading to
leak of the raid_set structure allocated at the beginning of
raid_ctr(). To fix this issue, go to the label 'bad' if the error
occurs.
Fixes: 11e4723206 ("dm raid: stop keeping raid set frozen altogether")
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This function is supposed to return error pointers so it matches the
dmz_get_rnd_zone_for_reclaim() function. The current code could lead to
a NULL dereference in dmz_do_reclaim()
Fixes: b234c6d7a7 ("dm zoned: improve error handling in reclaim")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Change the "frontend" dust_remove_block, dust_add_block, and
dust_query_block functions to store the "dust block number", instead
of the sector number corresponding to the "dust block number".
For the "backend" functions dust_map_read and dust_map_write,
right-shift by sect_per_block_shift. This fixes the inability to
emulate failure beyond the first sector of each "dust block" (for
devices with a "dust block size" larger than 512 bytes).
Fixes: e4f3fabd67 ("dm: add dust target")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan Gurney <bgurney@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The conversion during HDMI HW readout from port_clock to crtc_clock was
missed when HDMI 10bpc support was added, so fix that.
v2:
- Unscrew the non-HDMI case.
Fixes: cd9e11a8bf ("drm/i915/icl: Add 10-bit support for hdmi")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com
(cherry picked from commit 2969a78aea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We should keep the case of "#define debug_align(X) (X)" for all arches
without CONFIG_HAS_STRICT_MODULE_RWX ability, which would save people, who
are sensitive to system size, a lot of memory when using modules,
especially for embedded systems. This is also the intention of the
original #ifdef... statement and still valid for now.
Note that this still keeps the effect of the fix of the following commit,
38f054d549 ("modules: always page-align module section allocations"),
since when CONFIG_ARCH_HAS_STRICT_MODULE_RWX is enabled, module pages are
aligned.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
This reverts commit 4e103134b8.
Alex Williamson reported regressions with device assignment with
this patch. Even though the bug is probably elsewhere and still
latent, this is needed to fix the regression.
Fixes: 4e103134b8 ("KVM: x86/mmu: Zap only the relevant pages when removing a memslot", 2019-02-05)
Reported-by: Alex Willamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test and smm_test are failing on older processors that do not
have xcr0. This is because on those processor KVM does provide
support for KVM_GET/SET_XSAVE (to avoid having to rely on the older
KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: rpc_defconfig arm):
drivers/video/fbdev/acornfb.c: In function ‘acornfb_parse_dram’:
drivers/video/fbdev/acornfb.c:860:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
size *= 1024;
~~~~~^~~~~~~
drivers/video/fbdev/acornfb.c:861:3: note: here
case 'K':
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: mtx1_defconfig mips):
drivers/scsi/libsas/sas_discover.c: In function ‘sas_discover_domain’:
./include/linux/printk.h:309:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/libsas/sas_discover.c:459:3: note: in expansion of macro ‘pr_notice’
pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
^~~~~~~~~
drivers/scsi/libsas/sas_discover.c:462:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: cavium_octeon_defconfig mips):
arch/mips/include/asm/octeon/cvmx-sli-defs.h:47:6: warning: this statement
may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: allmodconfig arm):
drivers/power/supply/ab8500_charger.c: In function ‘ab8500_charger_max_usb_curr’:
drivers/power/supply/ab8500_charger.c:738:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (di->vbus_detected) {
^
drivers/power/supply/ab8500_charger.c:745:2: note: here
case USB_STAT_HM_IDGND:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: footbridge_defconfig arm):
drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’:
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
watchdog_ping();
^~~~~~~~~~~~~~~
drivers/watchdog/wdt285.c:172:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: assabet_defconfig arm):
drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’:
drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
printk(KERN_WARNING "SA1100 flash: unknown base address "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"0x%08lx, assuming CS0\n", phys);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mtd/maps/sa1100-flash.c:85:2: note: here
case SA1100_CS0_PHYS:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: sunxi_defconfig arm):
drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’:
drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
val |= SUN4I_TCON0_FRM_CTL_MODE_B;
drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here
case MEDIA_BUS_FMT_RGB666_1X18:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: multi_v7_defconfig arm):
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function ‘sun6i_dsi_transfer’:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:993:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (msg->rx_len == 1) {
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:998:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: rpc_defconfig arm):
arch/arm/mach-rpc/riscpc.c: In function ‘parse_tag_acorn’:
arch/arm/mach-rpc/riscpc.c:48:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
vram_size += PAGE_SIZE * 256;
~~~~~~~~~~^~~~~~~~~~~~~~~~~~
arch/arm/mach-rpc/riscpc.c:49:2: note: here
case 256:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: powerpc-ppa8548_defconfig powerpc):
drivers/dma/fsldma.c: In function ‘fsl_dma_chan_probe’:
drivers/dma/fsldma.c:1165:26: warning: this statement may fall through [-Wimplicit-fallthrough=]
chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/dma/fsldma.c:1166:2: note: here
case FSL_DMA_IP_83XX:
^~~~
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Pull HID fixes from Jiri Kosina:
- a few regression fixes for wacom driver (including fix for my earlier
mismerge) from Aaron Armstrong Skomra and Jason Gerecke
- revert of a few Logitech device ID additions which turn out to not
work perfectly with the hidpp driver at the moment; proper support is
now scheduled for 5.4. Fixes from Benjamin Tissoires
- scheduling-in-atomic fix for cp2112 driver, from Benjamin Tissoires
- new device ID to intel-ish, from Even Xu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: correct misreported EKR ring values
HID: cp2112: prevent sleeping function called from invalid context
HID: intel-ish-hid: ipc: add EHL device id
HID: wacom: Correct distance scale for 2nd-gen Intuos devices
HID: logitech-hidpp: remove support for the G700 over USB
Revert "HID: logitech-hidpp: add USB PID for a few more supported mice"
HID: wacom: add back changes dropped in merge commit
In fault_opcodes_write(), 'data' is allocated through kcalloc(). However,
it is not deallocated in the following execution if an error occurs,
leading to memory leaks. To fix this issue, introduce the 'free_data' label
to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566154486-3713-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In fault_opcodes_read(), 'data' is not deallocated if debugfs_file_get()
fails, leading to a memory leak. To fix this bug, introduce the 'free_data'
label to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566156571-4335-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through
kcalloc(). However, it is not always deallocated in the following execution
if an error occurs, leading to memory leaks. To fix this issue, free
'tun_qp->tx_ring' whenever an error occurs.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In cma_init, if cma_configfs_init fails, need to free the
previously memory and return fail, otherwise will trigger
null-ptr-deref Read in cma_cleanup.
cma_cleanup
cma_configfs_exit
configfs_unregister_subsystem
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check conditions that are mandatory to post_send UMR WQEs.
1. Modifying page size.
2. Modifying remote atomic permissions if atomic access is required.
If either condition is not fulfilled then fail to post_send() flow.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR WQE in the MR re-registration flow requires that
modify_atomic and modify_entity_size capabilities are enabled.
Therefore, check that the these capabilities are present before going to
umr flow and go through slow path if not.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.
Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce helper function to unify various use_umr checks.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
task_active_pid_ns() is wrong API to check PID namespace because it
posses some restrictions and return PID namespace where the process
was allocated. It created mismatches with current namespace, which
can be different.
Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable
results without any relation to allocated PID namespace.
Fixes: 8be565e65f ("RDMA/nldev: Factor out the PID namespace check")
Fixes: 6a6c306a09 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
"Auto" configuration mode is called for visible in that PID
namespace and it ensures that all counters and QPs are coexist
in the same namespace and belong to same PID.
Fixes: 99fa331dc8 ("RDMA/counter: Add "auto" configuration mode support")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order. A stale TID RDMA data packet
could lead to TidErr if the TID entries have been released by duplicate
data packets generated from retries, and subsequently erroneously force
the qp into error state in the current implementation.
Since the payload has already been dropped by hardware, the packet can
be simply dropped and it is no longer necessary to put the qp into
error state.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA WRITE DATA packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: d72fe7d500 ("IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192051.105923.69979.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA READ RESP packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192045.105923.59813.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When processing a TID RDMA READ RESP packet that causes KDETH EFLAGS
errors, the packet's IB PSN is checked against qp->s_last_psn and
qp->s_psn without the protection of qp->s_lock, which is not safe.
This patch fixes the issue by acquiring qp->s_lock first.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192039.105923.7852.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
the sender could receive stale TID RDMA NAK packets that contain newer
KDETH PSNs and older Verbs PSNs. If not dropped, these packets could
cause the incorrect rewinding of the software flows and the incorrect
completion of TID RDMA WRITE requests, and eventually leading to memory
corruption and kernel crash.
The current code drops stale TID RDMA ACK/NAK packets solely based
on KDETH PSNs, which may lead to erroneous processing. This patch
fixes the issue by also checking the Verbs PSN. Addition checks are
added before rewinding the TID RDMA WRITE DATA packets.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In siw_connect() we have an error flow where there is no valid qp
pointer. Make sure we don't try to de-ref in that situation.
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190819140257.19319-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages
should be calculated based on the extent of the MR, which is rounded
to the nearest huge page alignment.
Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to check if we have CQEs pending before starting a poll loop,
as those could be the events we will be spinning for (and hence we'll
find none). This can happen if a CQE triggers an error, or if it is
found by eg an IRQ before we get a chance to find it through polling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.
When this situation occurs the drive doesn't resume properly from
suspend-to-idle.
LiteON has confirmed this problem and fixed in the next firmware
version. As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
