Simon Horman says:
====================
allow user to offload tc action to net device
Baowen Zheng says:
Allow use of flow_indr_dev_register/flow_indr_dev_setup_offload to offload
tc actions independent of flows.
The motivation for this work is to prepare for using TC police action
instances to provide hardware offload of OVS metering feature - which calls
for policers that may be used by multiple flows and whose lifecycle is
independent of any flows that use them.
This patch includes basic changes to offload drivers to return EOPNOTSUPP
if this feature is used - it is not yet supported by any driver.
Tc cli command to offload and quote an action:
# tc qdisc del dev $DEV ingress && sleep 1 || true
# tc actions delete action police index 200 || true
# tc qdisc add dev $DEV ingress
# tc qdisc show dev $DEV ingress
# tc actions add action police rate 100mbit burst 10000k index 200 skip_sw
# tc -s -d actions list action police
total acts 1
action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify
overhead 0b linklayer ethernet
ref 1 bind 0 installed 142 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc filter add dev $DEV protocol ip parent ffff: \
flower skip_sw ip_proto tcp action police index 200
# tc -s -d filter show dev $DEV protocol ip parent ffff:
filter pref 49152 flower chain 0
filter pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
skip_sw
in_hw in_hw_count 1
action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action
reclassify overhead 0b linklayer ethernet
ref 2 bind 1 installed 300 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc filter add dev $DEV protocol ipv6 parent ffff: \
flower skip_sw ip_proto tcp action police index 200
# tc -s -d filter show dev $DEV protocol ipv6 parent ffff:
filter pref 49151 flower chain 0
filter pref 49151 flower chain 0 handle 0x1
eth_type ipv6
ip_proto tcp
skip_sw
in_hw in_hw_count 1
action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action
reclassify overhead 0b linklayer ethernet
ref 3 bind 2 installed 761 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
# tc -s -d actions list action police
total acts 1
action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet
ref 3 bind 2 installed 917 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
Changes between v7 and v8:
* Rename enum offload_act_command as enum flow_offload_act_command
* Add a single patch to rename exts stats update function for readability.
* Fix the kernel test robot issue reported by Oliver Sang.
Changes between v6 and v7:
* Add a single patch to rename offload functions with offload for readability.
* Post 166b6a46b7 ("flow_offload: return EOPNOTSUPP for the unsupported mpls action type") as a bug fix to netdev.
* Rename enum flow_act_command as enum flow_offload_act_command
* Rename the new added action offload setup ops with offload instead of flow
* Rename the new added action offload function with offload instead of flow.
* Add more selftest cases for validate filter and actions.
Changes between v5 and v6:
* Fix issue reported by Dan Carpenter found using Smatch.
Changes beteeen v4 and v5:
* Made changes of code style according to the public review comments.
* Add a fix for unsupported mpls action type in flow action setup stage.
* Add ops to tc_action_ops for flow action setup to facilitate
adding a standalone action module.
* Add notification process when deleting action in reoffload process.
Changes between v3 and v4:
* Made changes according to the public review comments.
* Validate flags inside tcf_action_init() instead of creating new
tcf_exts_validate_actions() function.
* Exactly match when validating flags of actions and filters.
* Add index to flow_action_entry for driver to identify actions.
Changes between v2 and v3:
* Made changes according to the review comments.
* Delete in_hw and not_in_hw flag and user can judge if the action is
offloaded to any hardware by in_hw_count.
* Split the main patch of the action offload to three single patch to
facilitate code review.
Changes between v1 and v2:
* Add the skip_hw/skip_sw for user to specify if the action should be in
hardware or software.
* Fix issue of sleeping function called from invalid context.
* Change the action offload/delete from batch to one by one.
* Add some parameters to the netlink message for user space to look up
the offload status of the actions.
* Add reoffload process to update action hw_count when driver is inserted
or removed.
Changes between v1 and RFC:
* Fix robot test failure.
* Change actions offload process in action add function rather than action
init.
* Change actions offload delete process after tcf_del_notify to keep
undeleted actions.
* Add process to update actions stats from hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest cases in action police with skip_hw.
Add selftest case to validate flags of filter and action.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add process to validate flags of filter and actions when adding
a tc filter.
We need to prevent adding filter with flags conflicts with its actions.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reoffload process to update hw_count when driver
is inserted or removed.
We will delete the action if it is with skip_sw flag and
not offloaded to any hardware in reoffload process.
When reoffloading actions, we still offload the actions
that are added independent of filters.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save full action flags and return user flags when return flags to
user space.
Save full action flags to distinguish if the action is created
independent from classifier.
We made this change mainly for further patch to reoffload tc actions.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When collecting stats for actions update them using both
hardware and software counters.
Stats update process should not run in context of preempt_disable.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename exts stats update functions with hw for readability.
We make this change also to update stats from hw for an action
when it is offloaded to hw as a single action.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add skip_hw and skip_sw for user to control if offload the action
to hardware.
We also add in_hw_count for user to indicate if the action is offloaded
to any hardware.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use flow_indr_dev_register/flow_indr_dev_setup_offload to
offload tc action.
We need to call tc_cleanup_flow_action to clean up tc action entry since
in tc_setup_action, some actions may hold dev refcnt, especially the mirror
action.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new ops to tc_action_ops for flow action setup.
Refactor function tc_setup_flow_action to use this new ops.
We make this change to facilitate to add standalone action module.
We will also use this ops to offload action independent of filter
in following patch.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improves readability, we rename offload functions with offload instead
of flow.
The term flow is related to exact matches, so we rename these functions
with offload.
We make this change to facilitate single action offload functions naming.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add index to flow_action_entry structure and delete index from police and
gate child structure.
We make this change to offload tc action for driver to identify a tc
action.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch will allow users to offload tc actions independent of
classifier in the software datapath.
In preparation for this, teach all drivers that support offload of the flow
tables to reject such configuration as currently none of them support it.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fill flags to action structure to allow user control if
the action should be offloaded to hardware or not.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xdp_rxq_info_unreg() called by xdp_rxq_info_reg() is meaningless when
dev is NULL, so move the if dev statements to the first.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-12-17
Brett Creeley says:
This patch series adds support in the iavf driver for communicating and
using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN
is very limited and covers all 802.1Q VLAN offloads and filtering with
no granularity.
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility,
and support for 802.1ad offloads and filtering. This includes the VF
negotiating which VLAN offloads/filtering it's allowed, where VLAN tags
should be inserted and/or stripped into and from descriptors, and the
supported VLAN protocols.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.17
These are three unrelated patches that we've been testing in the MPTCP
tree.
Patch 1 modifies the packet scheduler that picks which TCP subflow is
used for each chunk of outgoing data. The updated scheduler improves
throughput on multiple-subflow connections.
Patch 2 updates a selftest to verify recent TCP_ULP sockopt changes
on MPTCP fallback sockets.
Patch 3 cleans up some unnecessary comparisons with an 8-bit value.
====================
Link: https://lore.kernel.org/r/20211217233702.299461-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
entry->addr.id is u8 with a range from 0 to 255 and MAX_ADDR_ID is 255.
We should drop both false expressions of (entry->addr.id > MAX_ADDR_ID).
We should also remove the obsolete parentheses in the first if branch.
Use U8_MAX for MAX_ADDR_ID and add a comment to show the link to
mptcp_addr_info.id as suggested by Mr. Matthieu Baerts.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel will crash without
'mptcp: clear 'kern' flag from fallback sockets' change.
Since this doesn't slow down testing in a noticeable way,
run this unconditionally.
The explicit test did not catch this, because the check was done
for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a
tcp socket returned by accept() on a mptcp listen fd.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP packet scheduler has sub-optimal behavior with asymmetric
subflows: if the faster subflow-level cwin is closed, the packet
scheduler can enqueue "too much" data on a slower subflow.
When all the data on the faster subflow is acked, if the mptcp-level
cwin is closed, and link utilization becomes suboptimal.
The solution is implementing blest-like[1] HoL-blocking estimation,
transmitting only on the subflow with the shorter estimated time to
flush the queued memory. If such subflows cwin is closed, we wait
even if other subflows are available.
This is quite simpler than the original blest implementation, as we
leverage the pacing rate provided by the TCP socket. To get a more
accurate estimation for the subflow linger-time, we maintain a
per-subflow weighted average of such info.
Additionally drop magic numbers usage in favor of newly defined
macros and use more meaningful names for status variable.
[1] http://dl.ifip.org/db/conf/networking/networking2016/1570234725.pdf
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/137
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debugfs_create_dir() function never returns NULL. It does return
error pointers but in normal situations like this there is no need to
check for errors.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217071037.GE26548@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is already an "int err" declared at the start of the function so
re-use that instead of declaring a shadow err variable.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217070735.GC26548@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following warning is fixed with additional config dependencies:
s390-linux-ld: drivers/net/ethernet/engleder/tsnep_main.o: in function `tsnep_probe':
tsnep_main.c:(.text+0x1de6): undefined reference to `devm_ioremap_resource'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20211216200154.1520-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For VIRTCHNL_VF_OFFLOAD_VLAN, PF's would limit the number of VLAN
filters a VF was allowed to add. However, by the time the opcode failed,
the VLAN netdev had already been added. VIRTCHNL_VF_OFFLOAD_VLAN_V2
added the ability for a PF to tell the VF how many VLAN filters it's
allowed to add. Make changes to support that functionality.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the VF to support 802.1Q and 802.1ad VLAN insertion and stripping if
successfully negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
Multiple changes were needed to support this new functionality.
1. Added new aq_required flags to support any kind of VLAN stripping and
insertion offload requests via virtchnl.
2. Added the new method iavf_set_vlan_offload_features() that's
used during VF initialization, VF reset, and iavf_set_features() to
set the aq_required bits based on the current VLAN offload
configuration of the VF's netdev.
3. Added virtchnl handling for VIRTCHNL_OP_ENABLE_STRIPPING_V2,
VIRTCHNL_OP_DISABLE_STRIPPING_V2, VIRTCHNL_OP_ENABLE_INSERTION_V2,
and VIRTCHNL_OP_ENABLE_INSERTION_V2.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the Tx and Rx VLAN tag for insertion and
stripping offloads. In order to support this functionality a few changes
are needed.
1. Add a new method to cache the VLAN tag location based on negotiated
capabilities for the Tx and Rx ring flags. This needs to be called in
the initialization and reset paths.
2. Refactor the transmit hotpath to account for the new Tx ring flags.
When IAVF_TXR_FLAGS_VLAN_LOC_L2TAG2 is set, then the driver needs to
insert the VLAN tag in the L2TAG2 field of the transmit descriptor.
When the IAVF_TXRX_FLAGS_VLAN_LOC_L2TAG1 is set, then the driver needs
to use the l2tag1 field of the data descriptor (same behavior as
before).
3. Refactor the iavf_tx_prepare_vlan_flags() function to simplify
transmit hardware VLAN offload functionality by only depending on the
skb_vlan_tag_present() function. This can be done because the OS
won't request transmit offload for a VLAN unless the driver told the
OS it's supported and enabled.
4. Refactor the receive hotpath to account for the new Rx ring flags and
VLAN ethertypes. This requires checking the Rx ring flags and
descriptor status bits to determine the location of the VLAN tag.
Also, since only a single ethertype can be supported at a time, check
the enabled netdev features before specifying a VLAN ethertype in
__vlan_hwaccel_put_tag().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Based on VIRTCHNL_VF_OFFLOAD_VLAN_V2, the VF can now support more VLAN
capabilities (i.e. 802.1AD offloads and filtering). In order to
communicate these capabilities to the netdev layer, the VF needs to
parse its VLAN capabilities based on whether it was able to negotiation
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or neither of
these.
In order to support this, add the following functionality:
iavf_get_netdev_vlan_hw_features() - This is used to determine the VLAN
features that the underlying hardware supports and that can be toggled
off/on based on the negotiated capabiltiies. For example, if
VIRTCHNL_VF_OFFLOAD_VLAN_V2 was negotiated, then any capability marked
with VIRTCHNL_VLAN_TOGGLE can be toggled on/off by the VF. If
VIRTCHNL_VF_OFFLOAD_VLAN was negotiated, then only VLAN insertion and/or
stripping can be toggled on/off.
iavf_get_netdev_vlan_features() - This is used to determine the VLAN
features that the underlying hardware supports and that should be
enabled by default. For example, if VIRTHCNL_VF_OFFLOAD_VLAN_V2 was
negotiated, then any supported capability that has its ethertype_init
filed set should be enabled by default. If VIRTCHNL_VF_OFFLOAD_VLAN was
negotiated, then filtering, stripping, and insertion should be enabled
by default.
Also, refactor iavf_fix_features() to take into account the new
capabilities. To do this, query all the supported features (enabled by
default and toggleable) and make sure the requested change is supported.
If VIRTCHNL_VF_OFFLOAD_VLAN_V2 is successfully negotiated, there is no
need to check VIRTCHNL_VLAN_TOGGLE here because the driver already told
the netdev layer which features can be toggled via netdev->hw_features
during iavf_process_config(), so only those features will be requested
to change.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In order to support the new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability the
VF driver needs to rework it's initialization state machine and reset
flow. This has to be done because successful negotiation of
VIRTCHNL_VF_OFFLOAD_VLAN_V2 requires the VF driver to perform a second
capability request via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS before
configuring the adapter and its netdev.
Add the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit when sending the
VIRTHCNL_OP_GET_VF_RESOURECES message. The underlying PF will either
support VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or
neither. Both of these offloads should never be supported together.
Based on this, add 2 new states to the initialization state machine:
__IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS
__IAVF_INIT_CONFIG_ADAPTER
The __IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS state is used to request/store
the new VLAN capabilities if and only if VIRTCHNL_VLAN_OFFLOAD_VLAN_V2
was successfully negotiated in the __IAVF_INIT_GET_RESOURCES state.
The __IAVF_INIT_CONFIG_ADAPTER state is used to configure the
adapter/netdev after the resource requests have finished. The VF will
move into this state regardless of whether it successfully negotiated
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2.
Also, add a the new flag IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS and set
it during VF reset. If VIRTCHNL_VF_OFFLOAD_VLAN_V2 was successfully
negotiated then the VF will request its VLAN capabilities via
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS during the reset. This is needed
because the PF may change/modify the VF's configuration during VF reset
(i.e. modifying the VF's port VLAN configuration).
This also, required the VF to call netdev_update_features() since its
VLAN features may change during VF reset. Make sure to call this under
rtnl_lock().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently VIRTCHNL only allows for VLAN filtering and offloads to happen
on a single 802.1Q VLAN. Add support to filter and offload on inner,
outer, and/or inner + outer VLANs.
This is done by introducing the new capability
VIRTCHNL_VF_OFFLOAD_VLAN_V2. The flow to negotiate this new capability
is shown below.
1. VF - sets the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit in the
virtchnl_vf_resource.vf_caps_flags during the
VIRTCHNL_OP_GET_VF_RESOURCES request message. The VF should also set
the VIRTCHNL_VF_OFFLOAD_VLAN bit in case the PF driver doesn't support
the new capability.
2. PF - sets the VLAN capability bit it supports in the
VIRTCHNL_OP_GET_VF_RESOURCES response message. This will either be
VIRTCHNL_VF_OFFLOAD_VLAN_V2, VIRTCHNL_VF_OFFLOAD_VLAN, or none.
3. VF - If the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability was ACK'd by the
PF, then the VF needs to request the VLAN capabilities of the
PF/Device by issuing a VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS request.
If the VIRTCHNL_VF_OFFLOAD_VLAN capability was ACK'd then the VF
knows only single 802.1Q VLAN filtering/offloads are supported. If no
VLAN capability is ACK'd then the PF/Device doesn't support hardware
VLAN filtering/offloads for this VF.
4. PF - Populates the virtchnl_vlan_caps structure based on what it
allows/supports for that VF and sends that response via
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
After VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is successfully negotiated
the VF driver needs to interpret the capabilities supported by the
underlying PF/Device. The VF will be allowed to filter/offload the
inner 802.1Q, outer (various ethertype), inner 802.1Q + outer
(various ethertypes), or none based on which fields are set.
The VF will also need to interpret where the VLAN tag should be inserted
and/or stripped based on the negotiated capabilities.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmG8i3cRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZumyAf7BlhO1TUuwhhs9y6fi6KLa/pEOmkx2SRf
9AuEfxxrLPhlzh29Dz4Bn8B+KBG6HFQ1FngSwIAVjLL5pX/1ARBMx9B2TDf9p/Sb
UgkE6WOX29s7LXuC2lDnBnvnKbf5/rdLmZPZCFCv/iKaGAJAYYXYSQjtj5/Fmdkc
PhQNgALWG9a02bfSLk1MlF1lCqt0hsKFQkza29jTa9CKcWYZFK3sTl1spbHAN5yQ
YJMecy+fSxCSuJPZB3elG5os69sz3WGoFY/AYCWoUODNZo18Z4kiAXwurPDIM+GW
3e/lzXe29V1TB36haNe9/C5F2uwoYWGSoWwHcZ62lLpNhJ649wJDbw==
=4wFO
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.17
Second set of patches for v5.17, planning to do at least one more.
Smaller new features, nothing special this time.
Major changes:
rtw88
* debugfs file to fix tx rate
iwlwifi
* support SAR GEO Offset Mapping (SGOM) via BIOS
* support firmware API version 68
* add some new device IDs
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
* tag 'wireless-drivers-next-2021-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (129 commits)
wcn36xx: Implement beacon filtering
wcn36xx: Fix physical location of beacon filter comment
wcn36xx: Fix beacon filter structure definitions
ath11k: Use reserved host DDR addresses from DT for PCI devices
dt: bindings: add new DT entry for ath11k PCI device support
wilc1000: Improve WILC TX performance when power_save is off
wl1251: specify max. IE length
rsi: fix array out of bound
wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"
wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-tx
wilc1000: Rename irq handler from "WILC_IRQ" to netdev name
wilc1000: Rename SPI driver from "WILC_SPI" to "wilc1000_spi"
wilc1000: Fix spurious "FW not responding" error
wilc1000: Remove misleading USE_SPI_DMA macro
wilc1000: Fix missing newline in error message
wilc1000: Fix copy-and-paste typo in wilc_set_mac_address
rtw89: coex: Update COEX to 5.5.8
rtw89: coex: Cancel PS leaving while C2H comes
rtw89: coex: Update BT counters while receiving report
rtw89: coex: Define LPS state for BTC using
...
====================
Link: https://lore.kernel.org/r/20211217130952.34887C36AE9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
RX fencing allows the driver to know that any prior change to the RQs has
finished, e.g. when the RQs are disabled/enabled or the hashkey/indirection
table are changed, RX fencing is required.
Remove the previous workaround "ssleep(1)" and add the real support for
RX fencing as the PF driver supports the MANA_FENCE_RQ request now (any
old PF driver not supporting the request won't be used in production).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/20211216001748.8751-1-decui@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eliminate the following coccicheck warning:
./drivers/net/ethernet/vertexcom/mse102x.c:414:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211216015433.83383-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current use of circular buffer to manage stats_context_id is
very obscure, and it will cause problem if its element size is
not power of two. So change the use more straightforward and
scalable, and also change that for mask_id to keep consistency.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/1639618621-5857-1-git-send-email-yinjun.zhang@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jWtt
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20211216' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single patch to fix a problem where the audit queue could grow
unbounded when the audit daemon is forcibly stopped"
* tag 'audit-pr-20211216' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: improve robustness of the audit queue handling
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211, fix:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf, fix:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock,
avoid deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VIbd
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
There are a number of DT fixes, mostly for mistakes found through
static checking of the dts files again, as well as a couple of
minor changes to address incorrect DT settings.
For i.MX, there is yet another series of devitree changes to update
RGMII delay settings for ethernet, which is an ongoing problem after
some driver changes.
For SoC specific device drivers, a number of smaller fixes came up:
- i.MX SoC identification was incorrectly registered non-i.MX
machines when the driver is built-in
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- a few compile fixes for warnings that get in the way of -Werror
- a string overflow in the scpi firmware driver
- a boot failure with FORTIFY_SOURCE on Rockchips machines
- broken error handling in the AMD TEE driver
- a revert for a tegra reset driver commit that broke HDA
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmG7TYMACgkQmmx57+YA
GNm47Q//VP+oHAELnCVZ5WGcwz/0uMBgxLfzCxzSOHwKZpbd1W91aJn5OzwW6YWu
r6AMZdRNBMA6jv9lCx2DsVSCiuFjiSgHfqbPrL8F8xb4plwTs7pZw2b37bXgD0G6
fJwN0/lIP0tMJBLHzNWB3BveOJOOpqWsggIEtNW9we+jnhHMDCY7YKgTuzSvt3rR
I1mZZk5ZECILCziVBaY+IPEV4MMcm0z9IHCbckbnBsYPMP6Mf75guQvpdPQZHaJl
gTivB1/HLaYCbyJV1i/UyVTe06sKqeVNP8Bj3JMSrR755V6PqwkWhJOFKNtHMkhu
7sY5/Ie4hbpB5sx/0wXCRbOpSPnuEK3mYBKzBkh6ARBFXEDbLmTtCKKNaOLXiOtj
XEmgqGj3qCkidUDeR/yePpEuVkFeNrtT6G1C64IQWmM8OHYMYoGSC29nViwtNv3O
XjSRESvZeQVKr9WmGuF6SnvGrPh6Olovw7MedrT8iY7PB7YDTju8PBqh6/bTfTIN
SchIP/umYEwduuIYdb2arNNPJ4MwmgDdlsxx8A0UEBhIRGXekNrwPTG9YpdJve5P
Tiu+m3ubdQ6bkFHyx14jZtqC37vazlZjiCY3kiB0VqMFvYZ1e+JG9zwjofAqU7rG
18I5Vq8AtPcpBcyFItW5oqcDiv0GYggxkjRihJzt13gB0L+iTsE=
=04HK
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of DT fixes, mostly for mistakes found through
static checking of the dts files again, as well as a couple of minor
changes to address incorrect DT settings.
For i.MX, there is yet another series of devitree changes to update
RGMII delay settings for ethernet, which is an ongoing problem after
some driver changes.
For SoC specific device drivers, a number of smaller fixes came up:
- i.MX SoC identification was incorrectly registered non-i.MX
machines when the driver is built-in
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- a few compile fixes for warnings that get in the way of -Werror
- a string overflow in the scpi firmware driver
- a boot failure with FORTIFY_SOURCE on Rockchips machines
- broken error handling in the AMD TEE driver
- a revert for a tegra reset driver commit that broke HDA"
* tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc/tegra: fuse: Fix bitwise vs. logical OR warning
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
ARM: socfpga: dts: fix qspi node compatible
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: meson: remove COMMON_CLK
arm64: meson: fix dts for JetHub D1
tee: amdtee: fix an IS_ERR() vs NULL bug
arm64: dts: apple: change ethernet0 device type to ethernet
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: rockchip: fix poweroff on helios64
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
...
Daniel Borkmann says:
====================
pull-request: bpf 2021-12-16
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Link: https://lore.kernel.org/r/20211216210005.13815-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL,
but it cannot distinguish IS_ERR pointer from valid one.
When offset is added to IS_ERR pointer it may become small positive
value which is a user address that is not handled by extable logic
and has to be checked for at the runtime.
Tighten BPF_PROBE_MEM pointer check code to prevent this case.
Fixes: 4c5de12759 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The prog - start_of_ldx is the offset before the faulting ldx to the location
after it, so this will be used to adjust pt_regs->ip for jumping over it and
continuing, and with old temp it would have been fixed up to the wrong offset,
causing crash.
Fixes: 4c5de12759 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
linux-next. The problem is that two clks being registered at the same
time can lead to a busted clk tree if the parent isn't fully registered
by the time the child finds the parent. We rejigger the place where we
mark the parent as fully registered so that the child can't find the
parent until things are proper.
-----BEGIN PGP SIGNATURE-----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=UA+0
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single fix for the clk framework that needed some more bake time in
linux-next.
The problem is that two clks being registered at the same time can
lead to a busted clk tree if the parent isn't fully registered by the
time the child finds the parent. We rejigger the place where we mark
the parent as fully registered so that the child can't find the parent
until things are proper"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Don't parent clks until the parent is fully registered
Make the bounds propagation in __reg_assign_32_into_64() slightly more
robust and readable by aligning it similarly as we did back in the
__reg_combine_64_into_32() counterpart. Meaning, only propagate or
pessimize them as a smin/smax pair.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
For the case where both s32_{min,max}_value bounds are positive, the
__reg_assign_32_into_64() directly propagates them to their 64 bit
counterparts, otherwise it pessimises them into [0,u32_max] universe and
tries to refine them later on by learning through the tnum as per comment
in mentioned function. However, that does not always happen, for example,
in mov32 operation we call zext_32_to_64(dst_reg) which invokes the
__reg_assign_32_into_64() as is without subsequent bounds update as
elsewhere thus no refinement based on tnum takes place.
Thus, not calling into the __update_reg_bounds() / __reg_deduce_bounds() /
__reg_bound_offset() triplet as we do, for example, in case of ALU ops via
adjust_scalar_min_max_vals(), will lead to more pessimistic bounds when
dumping the full register state:
Before fix:
0: (b4) w0 = -1
1: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
1: (bc) w0 = w0
2: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=0,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
Technically, the smin_value=0 and smax_value=4294967295 bounds are not
incorrect, but given the register is still a constant, they break assumptions
about const scalars that smin_value == smax_value and umin_value == umax_value.
After fix:
0: (b4) w0 = -1
1: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
1: (bc) w0 = w0
2: R0_w=invP4294967295
(id=0,imm=ffffffff,
smin_value=4294967295,smax_value=4294967295,
umin_value=4294967295,umax_value=4294967295,
var_off=(0xffffffff; 0x0),
s32_min_value=-1,s32_max_value=-1,
u32_min_value=-1,u32_max_value=-1)
Without the smin_value == smax_value and umin_value == umax_value invariant
being intact for const scalars, it is possible to leak out kernel pointers
from unprivileged user space if the latter is enabled. For example, when such
registers are involved in pointer arithmtics, then adjust_ptr_min_max_vals()
will taint the destination register into an unknown scalar, and the latter
can be exported and stored e.g. into a BPF map value.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
ath.git patches for v5.17. Major changes:
ath11k
* support PCI devices with 1 MSI vector
* WCN6855 hw2.1 support
* 11d scan offload support
* full monitor mode, only supported on QCN9074
* scan MAC address randomization support
* reserved host DDR addresses from DT for PCI devices support
ath9k
* switch to rate table based lookup
ath
* extend South Korea regulatory domain support
wcn36xx
* beacon filter support
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmG7cKcACgkQxSPxCi2d
A1qgxggAn4k9cGzxLTT+xgkufQKwsc+WvegR7Amwb/jzKh5XE9KaXDnMkcyz/4GX
nHCfynHRgWjPU6V3cESRz/MApG/7sQ6UGtLgIXkZGbeSHIE4aRYf3AECUhpD/uB+
XPX4kTFz0ZvIHYpk4HielOHVA31DQl+GkYXddDXCijXYmG80rpUgUg2fm0+O+TtQ
eCQjbQV173KSbi4vlzeDyK9cp2rIGvk/UfmY9cIw1b3Gd5vpCVStW9r+P8MEpSNA
ar5exvN9c3AR/VIVfBS/9rw0T+l56M8L0efPrSXEV9/pdiXHFzEx+sGEnDUE5F3o
g9K2VwkLtuk3kubiSV/kjNBIB4cZyA==
=razj
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix use after free in DM btree remove's rebalance_children()
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local()
* tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix data corruption due to improper use of bvec_kmap_local
dm btree remove: fix use after free in rebalance_children()
