mirror of
https://github.com/torvalds/linux.git
synced 2024-12-03 17:41:22 +00:00
7a92fc8b4d
241 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Alexander Aring
|
a470cb2a06 |
dlm: slow down filling up processing queue
If there is a burst of message the receive worker will filling up the processing queue but where are too slow to process dlm messages. This patch will slow down the receiver worker to keep the buffer on the socket layer to tell the sender to backoff. This is done by a threshold to get the next buffers from the socket after all messages were processed done by a flush_workqueue(). This however only occurs when we have a message burst when we e.g. create 1 million locks. If we put more and more new messages to process in the processqueue we will soon run out of memory. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
4b056db81c |
fs: dlm: remove unused processed_nodes
The variable processed_nodes is not being used by commit
|
||
Linus Torvalds
|
0a37714f96 |
dlm for 6.5
The dlm posix lock handling (for gfs2) has three notable changes:
- Local pids returned from GETLK are no longer negated. A previous
patch negating remote pids mistakenly changed local pids also.
- SETLKW operations can now be interrupted only when the process is
killed, and not from other signals. General interruption was
resulting in previously acquired locks being cleared, not just
the in-progress lock. Handling this correctly will require
extending a cancel capability to user space (a future feature.)
- If multiple threads are requesting posix locks (with SETLKW),
fix incorrect matching of results to the requests.
The dlm networking has several minor cleanups, and one notable change:
- Avoid delaying ack messages for too long (used for message reliability),
resulting in a backlog of un-acked messages. These could previously
be delayed as a result of either too many or too few other messages
being sent. Now an upper and lower threshold is used to determine
when an ack should be sent.
-----BEGIN PGP SIGNATURE-----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=+TTu
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"The dlm posix lock handling (for gfs2) has three notable changes:
- Local pids returned from GETLK are no longer negated. A previous
patch negating remote pids mistakenly changed local pids also.
- SETLKW operations can now be interrupted only when the process is
killed, and not from other signals. General interruption was
resulting in previously acquired locks being cleared, not just the
in-progress lock. Handling this correctly will require extending a
cancel capability to user space (a future feature.)
- If multiple threads are requesting posix locks (with SETLKW), fix
incorrect matching of results to the requests.
The dlm networking has several minor cleanups, and one notable change:
- Avoid delaying ack messages for too long (used for message
reliability), resulting in a backlog of un-acked messages. These
could previously be delayed as a result of either too many or too
few other messages being sent. Now an upper and lower threshold is
used to determine when an ack should be sent"
* tag 'dlm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: remove filter local comms on close
fs: dlm: add send ack threshold and append acks to msgs
fs: dlm: handle sequence numbers as atomic
fs: dlm: handle lkb wait count as atomic_t
fs: dlm: filter ourself midcomms calls
fs: dlm: warn about messages from left nodes
fs: dlm: move dlm_purge_lkb_callbacks to user module
fs: dlm: cleanup STOP_IO bitflag set when stop io
fs: dlm: don't check othercon twice
fs: dlm: unregister memory at the very last
fs: dlm: fix missing pending to false
fs: dlm: clear pending bit when queue was empty
fs: dlm: revert check required context while close
fs: dlm: fix mismatch of plock results from userspace
fs: dlm: make F_SETLK use unkillable wait_event
fs: dlm: interrupt posix locks only when process is killed
fs: dlm: fix cleanup pending ops when interrupted
fs: dlm: return positive pid value for F_GETLK
dlm: Replace all non-returning strlcpy with strscpy
|
||
David Howells
|
a1a5e87527 |
dlm: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage
When transmitting data, call down a layer using a single sendmsg with MSG_SPLICE_PAGES to indicate that content should be spliced rather using sendpage. This allows ->sendpage() to be replaced by something that can handle multiple multipage folios in a single transaction. Signed-off-by: David Howells <dhowells@redhat.com> cc: Christine Caulfield <ccaulfie@redhat.com> cc: David Teigland <teigland@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: cluster-devel@redhat.com Link: https://lore.kernel.org/r/20230623225513.2732256-7-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Aring
|
1696c75f18 |
fs: dlm: add send ack threshold and append acks to msgs
This patch changes the time when we sending an ack back to tell the other side it can free some message because it is arrived on the receiver node, due random reconnects e.g. TCP resets this is handled as well on application layer to not let DLM run into a deadlock state. The current handling has the following problems: 1. We end in situations that we only send an ack back message of 16 bytes out and no other messages. Whereas DLM has logic to combine so much messages as it can in one send() socket call. This behaviour can be discovered by "trace-cmd start -e dlm_recv" and observing the ret field being 16 bytes. 2. When processing of DLM messages will never end because we receive a lot of messages, we will not send an ack back as it happens when the processing loop ends. This patch introduces a likely and unlikely threshold case. The likely case will send an ack back on a transmit path if the threshold is triggered of amount of processed upper layer protocol. This will solve issue 1 because it will be send when another normal DLM message will be sent. It solves issue 2 because it is not part of the processing loop. There is however a unlikely case, the unlikely case has a bigger threshold and will be triggered when we only receive messages and do not sent any message back. This case avoids that the sending node will keep a lot of message for a long time as we send sometimes ack backs to tell the sender to finally release messages. The atomic cmpxchg() is there to provide a atomically ack send with reset of the upper layer protocol delivery counter. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
07ee38674a |
fs: dlm: filter ourself midcomms calls
It makes no sense to call midcomms/lowcomms functionality for the local node as socket functionality is only required for remote nodes. This patch filters those calls in the upper layer of lockspace membership handling instead of doing it in midcomms/lowcomms layer as they should never be aware of local nodeid. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
d41a1a3db4 |
fs: dlm: cleanup STOP_IO bitflag set when stop io
There should no difference between setting the CF_IO_STOP flag before restore_callbacks() to do it before or afterwards. The restore_callbacks() will be sure that no callback is executed anymore when the bit wasn't set. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
f8bce79d9d |
fs: dlm: don't check othercon twice
This patch removes an another check if con->othercon set inside the branch which already does that. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
f68bb23cad |
fs: dlm: fix missing pending to false
This patch sets the process_dlm_messages_pending boolean to false when
there was no message to process. It is a case which should not happen
but if we are prepared to recover from this situation by setting pending
boolean to false.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Eric Dumazet
|
2f2d9972af |
net: annotate lockless accesses to sk->sk_err_soft
This field can be read/written without lock synchronization. tcp and dccp have been handled in different patches. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Edwin Török
|
7386457af3 |
DLM: increase socket backlog to avoid hangs with 16 nodes
On a 16 node virtual cluster with e1000 NICs joining the 12th node prints SYN flood warnings for the DLM port: Dec 21 01:46:41 localhost kernel: [ 2146.516664] TCP: request_sock_TCP: Possible SYN flooding on port 21064. Sending cookies. Check SNMP counters. And then joining a DLM lockspace hangs: ``` Dec 21 01:49:00 localhost kernel: [ 2285.780913] INFO: task xapi-clusterd:17638 blocked for more than 120 seconds. Dec 21 01:49:00 localhost kernel: [ 2285.786476] Not tainted 4.4.0+10 #1 Dec 21 01:49:00 localhost kernel: [ 2285.789043] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Dec 21 01:49:00 localhost kernel: [ 2285.794611] xapi-clusterd D ffff88001930bc58 0 17638 1 0x00000000 Dec 21 01:49:00 localhost kernel: [ 2285.794615] ffff88001930bc58 ffff880025593800 ffff880022433800 ffff88001930c000 Dec 21 01:49:00 localhost kernel: [ 2285.794617] ffff88000ef4a660 ffff88000ef4a658 ffff880022433800 ffff88000ef4a000 Dec 21 01:49:00 localhost kernel: [ 2285.794619] ffff88001930bc70 ffffffff8159f6b4 7fffffffffffffff ffff88001930bd10 Dec 21 01:49:00 localhost kernel: [ 2285.794644] [<ffffffff811570fe>] ? printk+0x4d/0x4f Dec 21 01:49:00 localhost kernel: [ 2285.794647] [<ffffffff810b1741>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 Dec 21 01:49:00 localhost kernel: [ 2285.794649] [<ffffffff815a085d>] wait_for_completion+0x9d/0x110 Dec 21 01:49:00 localhost kernel: [ 2285.794653] [<ffffffff810979e0>] ? wake_up_q+0x80/0x80 Dec 21 01:49:00 localhost kernel: [ 2285.794661] [<ffffffffa03fa4b8>] dlm_new_lockspace+0x908/0xac0 [dlm] Dec 21 01:49:00 localhost kernel: [ 2285.794665] [<ffffffff810aaa60>] ? prepare_to_wait_event+0x100/0x100 Dec 21 01:49:00 localhost kernel: [ 2285.794670] [<ffffffffa0402e37>] device_write+0x497/0x6b0 [dlm] Dec 21 01:49:00 localhost kernel: [ 2285.794673] [<ffffffff811834f0>] ? handle_mm_fault+0x7f0/0x13b0 Dec 21 01:49:00 localhost kernel: [ 2285.794677] [<ffffffff811b4438>] __vfs_write+0x28/0xd0 Dec 21 01:49:00 localhost kernel: [ 2285.794679] [<ffffffff811b4b7f>] ? rw_verify_area+0x6f/0xd0 Dec 21 01:49:00 localhost kernel: [ 2285.794681] [<ffffffff811b4dc1>] vfs_write+0xb1/0x190 Dec 21 01:49:00 localhost kernel: [ 2285.794686] [<ffffffff8105ffc2>] ? __do_page_fault+0x302/0x420 Dec 21 01:49:00 localhost kernel: [ 2285.794688] [<ffffffff811b5986>] SyS_write+0x46/0xa0 Dec 21 01:49:00 localhost kernel: [ 2285.794690] [<ffffffff815a31ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ``` The previous limit of 5 seems like an arbitrary number, that doesn't match any known DLM cluster size upper bound limit. Signed-off-by: Edwin Török <edvin.torok@citrix.com> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: cluster-devel@redhat.com Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
00f30c051b |
fs: dlm: add unbound flag to dlm_io workqueue
This patch will add the WQ_UNBOUND flag to the lowcomms dlm_io workqueue which handles socket io handling to send and receive dlm messages. The amount of sockets will be 2 for a 3 node cluster. Each socket has two different workers for doing send and receive work by calling socket API functionality. Each worker will do their task in order to send dlm messages in a ordered stream based socket communication. On receive side the receive buffer will be queued up for an ordered dlm_process workqueue to parse received dlm messages. The parsing need to be done currently in an ordered synchronized way because the dlm message processing is not being made to parse parallel. After explaining all those workqueue behaviours in lowcomms, the dlm_io workqueue is only being used for socket handling. Each socket handling has 2 workers (send and receive). In a 3 cluster node we will end up with 4 workers. Without the WQ_UNBOUND flag the workers are tight to a CPU and can never switch, this could be an advantage because local CPU execution. However with dlm_locktorture testcase I expierenced not all workers are always in use and my assumption is that some workers are bound to the same CPU. We should always send or receive when we are ready to do so, one reason why we disable nigel algorithm on sockets. We should be safe to do the socket io handling on any CPU which can be switched during runtime. There is no assumption that the worker stays on the same CPU. There is no need to respect any workqueue concurrency model that each worker can only run on one CPU. Lowcomms queue_work() mechanism has an higher level flag to be sure that it can't schedule work if the previous worker did not signal it to keep ordered socket handling. Therefore this patch sets the WQ_UNBOUND flag to allow workers being executed by any available CPU. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S
IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK
nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ
7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el
n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW
9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl
leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4
LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP
n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC
xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc
edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1
Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI=
=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Alexander Aring
|
54fbe0c15d |
fs: dlm: bring back previous shutdown handling
This patch mostly reverts commit
|
||
Peilin Ye
|
40e0b09081 |
net/sock: Introduce trace_sk_data_ready()
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready() callback implementations. For example: <...> iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable <...> Suggested-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Benjamin Coddington
|
98123866fc |
Treewide: Stop corrupting socket's task_frag
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <philipp.reisner@linbit.com> CC: Lars Ellenberg <lars.ellenberg@linbit.com> CC: "Christoph Böhmwalder" <christoph.boehmwalder@linbit.com> CC: Jens Axboe <axboe@kernel.dk> CC: Josef Bacik <josef@toxicpanda.com> CC: Keith Busch <kbusch@kernel.org> CC: Christoph Hellwig <hch@lst.de> CC: Sagi Grimberg <sagi@grimberg.me> CC: Lee Duncan <lduncan@suse.com> CC: Chris Leech <cleech@redhat.com> CC: Mike Christie <michael.christie@oracle.com> CC: "James E.J. Bottomley" <jejb@linux.ibm.com> CC: "Martin K. Petersen" <martin.petersen@oracle.com> CC: Valentina Manea <valentina.manea.m@gmail.com> CC: Shuah Khan <shuah@kernel.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: David Howells <dhowells@redhat.com> CC: Marc Dionne <marc.dionne@auristor.com> CC: Steve French <sfrench@samba.org> CC: Christine Caulfield <ccaulfie@redhat.com> CC: David Teigland <teigland@redhat.com> CC: Mark Fasheh <mark@fasheh.com> CC: Joel Becker <jlbec@evilplan.org> CC: Joseph Qi <joseph.qi@linux.alibaba.com> CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Latchesar Ionkov <lucho@ionkov.net> CC: Dominique Martinet <asmadeus@codewreck.org> CC: Ilya Dryomov <idryomov@gmail.com> CC: Xiubo Li <xiubli@redhat.com> CC: Chuck Lever <chuck.lever@oracle.com> CC: Jeff Layton <jlayton@kernel.org> CC: Trond Myklebust <trond.myklebust@hammerspace.com> CC: Anna Schumaker <anna@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Suggested-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alexander Aring
|
7a5e9f1f83 |
fs: dlm: fix building without lockdep
This patch uses assert_spin_locked() instead of lockdep_is_held()
where it's available to use because lockdep_is_held() is only available
if CONFIG_LOCKDEP is set.
In other cases like lockdep_sock_is_held() we surround it by a
CONFIG_LOCKDEP idef.
Fixes:
|
||
|
Alexander Aring
|
dbb751ffab |
fs: dlm: parallelize lowcomms socket handling
This patch is rework of lowcomms handling, the main goal was here to handle recvmsg() and sendpage() to run parallel. Parallel in two senses: 1. per connection and 2. that recvmsg()/sendpage() doesn't block each other. Currently recvmsg()/sendpage() cannot run parallel because two workqueues "dlm_recv" and "dlm_send" are ordered workqueues. That means only one work item can be executed. The amount of queue items will be increased about the amount of nodes being inside the cluster. The current two workqueues for sending and receiving can also block each other if the same connection is executed at the same time in dlm_recv and dlm_send workqueue because a per connection mutex for the socket handling. To make it more parallel we introduce one "dlm_io" workqueue which is not an ordered workqueue, the amount of workers are not limited. Due per connection flags SEND/RECV pending we schedule workers ordered per connection and per send and receive task. To get rid of the mutex blocking same workers to do socket handling we switched to a semaphore which handles socket operations as read lock and sock releases as write operations, to prevent sock_release() being called while the socket is being used. There might be more optimization removing the semaphore and replacing it with other synchronization mechanism, however due other circumstances e.g. othercon behaviour it seems complicated to doing this change. I added comments to remove the othercon handling and moving to a different synchronization mechanism as this is done. We need to do that to the next dlm major version upgrade because it is not backwards compatible with the current connect mechanism. The processing of dlm messages need to be still handled by a ordered workqueue. An dlm_process ordered workqueue was introduced which gets filled by the receive worker. This is probably the next bottleneck of DLM but the application can't currently parse dlm messages parallel. A comment was introduced to lift the workqueue context of dlm processing in a non-sleepable softirq to get messages processing done fast. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
1351975ac1 |
fs: dlm: don't init error value
This patch removes a init of an error value to -EINVAL which is not necessary. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
c852a6d706 |
fs: dlm: use saved sk_error_report()
This patch changes the handling of calling the original sk_error_report() by not putting it on the stack and calling it later. If the listen_sock.sk_error_report() is NULL in this moment it indicates a bug in our implementation. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
e9dd5fd849 |
fs: dlm: use sock2con without checking null
This patch removes null checks on private data for sockets. If we have a null dereference there we having a bug in our implementation that such callback occurs in this state. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
6f0b0b5d7a |
fs: dlm: remove dlm_node_addrs lookup list
This patch merges the dlm_node_addrs lookup list to the connection structure. It is a per node mapping to some configuration setup by configfs. We don't need two lookup structures. The connection hash has now a lifetime like the dlm_node_addrs entries. Means we add only new entries when configure cluster and not while new connections are coming in, remove connection when a node got fenced and cleanup all connection when the dlm exits. It should work the same and even will show more issues because we don't try to somehow keep those two data structures in sync with the current cluster configuration. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
c51c9cd8ad |
fs: dlm: don't put dlm_local_addrs on heap
This patch removes to allocate the dlm_local_addr[] pointers on the heap. Instead we directly store the type of "struct sockaddr_storage". This removes function deinit_local() because it was freeing memory only. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
c3d88dfd15 |
fs: dlm: cleanup listen sock handling
This patch removes save_listen_callbacks() and add_listen_sock() as they are only used once in lowcomms functionality. For shutdown lowcomms it's not necessary to whole flush the workqueues to synchronize with restoring the old sk_data_ready() callback. Only the listen con receive work need to be cancelled. For each individual node shutdown we should be sure that last ack was been transmitted which is done by flushing per connection swork worker. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
4f567acb0b |
fs: dlm: remove socket shutdown handling
Since commit
|
||
|
Alexander Aring
|
1037c2a94a |
fs: dlm: use listen sock as dlm running indicator
This patch will switch from dlm_allow_conn to check if dlm lowcomms is running or not to if we actually have a listen socket set or not. The list socket will be set and unset in lowcomms start and shutdown functionality. To synchronize with data_ready() callback we will set the socket callback to NULL while socket lock is held. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
dd070a56e0 |
fs: dlm: use list_first_entry_or_null
Instead of check on list_empty() we can do the same with list_first_entry_or_null() and return NULL if the returned value is NULL. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
01ea3d7701 |
fs: dlm: remove twice INIT_WORK
This patch removed a twice INIT_WORK() functionality. We already doing this inside of dlm_lowcomms_init() functionality which is called only once dlm is loaded. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
8b0188b0d6 |
fs: dlm: add midcomms init/start functions
This patch introduces leftovers of init, start, stop and exit functionality. The dlm application layer should always call the midcomms layer which getting aware of such event and redirect it to the lowcomms layer. Some functionality which is currently handled inside the start functionality of midcomms and lowcomms should be handled in the init functionality as it only need to be initialized once when dlm is loaded. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
194a3fb488 |
fs: dlm: relax sending to allow receiving
This patch drops additionally the sock_mutex when there is a sending message burst. Since we have acknowledge handling we free sending buffers only when we receive an ack back, but if we are stuck in send_to_sock() looping because dlm sends a lot of messages and we never leave the loop the sending buffer fill up very quickly. We can't receive during this iteration because the sock_mutex is held. This patch will unlock the sock_mutex so it should be possible to receive messages when a burst of sending messages happens. This will allow to free up memory because acks which are already received can be processed. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
f0f4bb431b |
fs: dlm: retry accept() until -EAGAIN or error returns
This patch fixes a race if we get two times an socket data ready event while the listen connection worker is queued. Currently it will be served only once but we need to do it (in this case twice) until we hit -EAGAIN which tells us there is no pending accept going on. This patch wraps an do while loop until we receive a return value which is different than 0 as it was done before commit |
||
|
Alexander Aring
|
08ae0547e7 |
fs: dlm: fix sock release if listen fails
This patch fixes a double sock_release() call when the listen() is
called for the dlm lowcomms listen socket. The caller of
dlm_listen_for_all should never care about releasing the socket if
dlm_listen_for_all() fails, it's done now only once if listen() fails.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Alexander Aring
|
30ea3257e8 |
fs: dlm: fix race in lowcomms
This patch fixes a race between queue_work() in _dlm_lowcomms_commit_msg() and srcu_read_unlock(). The queue_work() can take the final reference of a dlm_msg and so msg->idx can contain garbage which is signaled by the following warning: [ 676.237050] ------------[ cut here ]------------ [ 676.237052] WARNING: CPU: 0 PID: 1060 at include/linux/srcu.h:189 dlm_lowcomms_commit_msg+0x41/0x50 [ 676.238945] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common iTCO_wdt iTCO_vendor_support qxl kvm_intel drm_ttm_helper vmw_vsock_virtio_transport kvm vmw_vsock_virtio_transport_common ttm irqbypass crc32_pclmul joydev crc32c_intel serio_raw drm_kms_helper vsock virtio_scsi virtio_console virtio_balloon snd_pcm drm syscopyarea sysfillrect sysimgblt snd_timer fb_sys_fops i2c_i801 lpc_ich snd i2c_smbus soundcore pcspkr [ 676.244227] CPU: 0 PID: 1060 Comm: lock_torture_wr Not tainted 5.19.0-rc3+ #1546 [ 676.245216] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014 [ 676.246460] RIP: 0010:dlm_lowcomms_commit_msg+0x41/0x50 [ 676.247132] Code: fe ff ff ff 75 24 48 c7 c6 bd 0f 49 bb 48 c7 c7 38 7c 01 bd e8 00 e7 ca ff 89 de 48 c7 c7 60 78 01 bd e8 42 3d cd ff 5b 5d c3 <0f> 0b eb d8 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 [ 676.249253] RSP: 0018:ffffa401c18ffc68 EFLAGS: 00010282 [ 676.249855] RAX: 0000000000000001 RBX: 00000000ffff8b76 RCX: 0000000000000006 [ 676.250713] RDX: 0000000000000000 RSI: ffffffffbccf3a10 RDI: ffffffffbcc7b62e [ 676.251610] RBP: ffffa401c18ffc70 R08: 0000000000000001 R09: 0000000000000001 [ 676.252481] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000005 [ 676.253421] R13: ffff8b76786ec370 R14: ffff8b76786ec370 R15: ffff8b76786ec480 [ 676.254257] FS: 0000000000000000(0000) GS:ffff8b7777800000(0000) knlGS:0000000000000000 [ 676.255239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 676.255897] CR2: 00005590205d88b8 CR3: 000000017656c003 CR4: 0000000000770ee0 [ 676.256734] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 676.257567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 676.258397] PKRU: 55555554 [ 676.258729] Call Trace: [ 676.259063] <TASK> [ 676.259354] dlm_midcomms_commit_mhandle+0xcc/0x110 [ 676.259964] queue_bast+0x8b/0xb0 [ 676.260423] grant_pending_locks+0x166/0x1b0 [ 676.261007] _unlock_lock+0x75/0x90 [ 676.261469] unlock_lock.isra.57+0x62/0xa0 [ 676.262009] dlm_unlock+0x21e/0x330 [ 676.262457] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 676.263183] torture_unlock+0x5a/0x90 [dlm_locktorture] [ 676.263815] ? preempt_count_sub+0xba/0x100 [ 676.264361] ? complete+0x1d/0x60 [ 676.264777] lock_torture_writer+0xb8/0x150 [dlm_locktorture] [ 676.265555] kthread+0x10a/0x130 [ 676.266007] ? kthread_complete_and_exit+0x20/0x20 [ 676.266616] ret_from_fork+0x22/0x30 [ 676.267097] </TASK> [ 676.267381] irq event stamp: 9579855 [ 676.267824] hardirqs last enabled at (9579863): [<ffffffffbb14e6f8>] __up_console_sem+0x58/0x60 [ 676.268896] hardirqs last disabled at (9579872): [<ffffffffbb14e6dd>] __up_console_sem+0x3d/0x60 [ 676.270008] softirqs last enabled at (9579798): [<ffffffffbc200349>] __do_softirq+0x349/0x4c7 [ 676.271438] softirqs last disabled at (9579897): [<ffffffffbb0d54c0>] irq_exit_rcu+0xb0/0xf0 [ 676.272796] ---[ end trace 0000000000000000 ]--- I reproduced this warning with dlm_locktorture test which is currently not upstream. However this patch fix the issue by make a additional refcount between dlm_lowcomms_new_msg() and dlm_lowcomms_commit_msg(). In case of the race the kref_put() in dlm_lowcomms_commit_msg() will be the final put. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
dfc020f334 |
fs: dlm: fix grammar in lowcomms output
This patch fixes some grammar output in lowcomms implementation by removing the "successful" word which should be "successfully" but it can never be unsuccessfully so we remove it. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
a8449f232e |
dlm: add __CHECKER__ for false positives
This patch will adds #ifndef __CHECKER__ for false positives warnings about an imbalance lock/unlock srcu handling. Which are shown by running sparse checks: fs/dlm/midcomms.c:1065:20: warning: context imbalance in 'dlm_midcomms_get_mhandle' - wrong count at exit Using __CHECKER__ will tell sparse to ignore these sections. Those imbalances are false positive because from upper layer it is always required to call a function in sequence, e.g. if dlm_midcomms_get_mhandle() is successful there must be a dlm_midcomms_commit_mhandle() call afterwards. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
Dan Carpenter
|
1f4f10845e |
dlm: uninitialized variable on error in dlm_listen_for_all()
The "sock" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Alexander Aring
|
feae43f8aa |
fs: dlm: print cluster addr if non-cluster node connects
This patch prints the cluster node address if a non-cluster node (according to the dlm config setting) tries to connect. The current hexdump call will print in a different loglevel and only available if dynamic debug is enabled. Additional we using the ip address format strings to print an IETF ip4/6 string represenation. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
e4dc81ed5a |
fs: dlm: memory cache for lowcomms hotpath
This patch introduces a kmem cache for dlm_msg handles which are used always if dlm sends a message out. Even if their are covered by midcomms layer or not. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
3af2326ca0 |
fs: dlm: memory cache for writequeue_entry
This patch introduces a kmem cache for writequeue entry. A writequeue entry get quite a lot allocated if dlm transmit messages. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
be3b0400ed |
fs: dlm: remove wq_alloc mutex
This patch cleanups the code for allocating a new buffer in the dlm writequeue mechanism. There was a possible tuneup to allow scheduling while a new writequeue entry needs to be allocated because either no sending page is available or are full. To avoid multiple concurrent users checking at the same time if an entry is available or full alloc_wq was introduce that those are waiting if there is currently a new writequeue entry in process to be queued so possible further users will check on the new allocated writequeue entry if it's full. To simplify the code we just remove this mutex and switch that the already introduced spin lock will be held during writequeue check, allocation and queueing. So other users can never check on available writequeues while there is a new one in process but not queued yet. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
bcbfea41e1 |
fs: dlm: check for pending users filling buffers
Currently we don't care if the DLM application stack is filling buffers (not committed yet) while we transmit some already committed buffers. By checking on active writequeue users before dequeue a writequeue entry we know there is coming more data and do nothing. We wait until the send worker will be triggered again if the writequeue entry users hit zero. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
1b9beda83e |
fs: dlm: fix build with CONFIG_IPV6 disabled
This patch will surround the AF_INET6 case in sk_error_report() of dlm
with a #if IS_ENABLED(CONFIG_IPV6). The field sk->sk_v6_daddr is not
defined when CONFIG_IPV6 is disabled. If CONFIG_IPV6 is disabled, the
socket creation with AF_INET6 should already fail because a runtime
check if AF_INET6 is registered. However if there is the possibility
that AF_INET6 is set as sk_family the sk_error_report() callback will
print then an invalid family type error.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
|
||
|
Alexander Aring
|
92c4460538 |
fs: dlm: replace use of socket sk_callback_lock with sock_lock
This patch will replace the use of socket sk_callback_lock lock and uses
socket lock instead. Some users like sunrpc, see commit
|
||
|
Alexander Aring
|
4c3d90570b |
fs: dlm: don't call kernel_getpeername() in error_report()
In some cases kernel_getpeername() will held the socket lock which is already held when the socket layer calls error_report() callback. Since commit |
||
|
Alexander Aring
|
b87b1883ef |
fs: dlm: remove double list_first_entry call
This patch removes a list_first_entry() call which is already done by the previous con_next_wq() call. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
5c16febbc1 |
fs: dlm: let handle callback data as void
This patch changes the dlm_lowcomms_new_msg() function pointer private data from "struct mhandle *" to "void *" to provide different structures than just "struct mhandle". Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
92732376fd |
fs: dlm: trace socket handling
This patch adds tracepoints for dlm socket receive and send functionality. We can use it to track how much data was send or received to or from a specific nodeid. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |
||
|
Alexander Aring
|
fe93367541 |
fs: dlm: remove check SCTP is loaded message
Since commit 764ff4011424 ("fs: dlm: auto load sctp module") we try
load the sctp module before we try to create a sctp kernel socket. That
a socket creation fails now has more likely other reasons. This patch
removes the part of error to load the sctp module and instead printout
the error code.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
||
|
Alexander Aring
|
b97f85259f |
fs: dlm: implement delayed ack handling
This patch changes that we don't ack each message. Lowcomms will take care about to send an ack back after a bulk of messages was processed. Currently it's only when the whole receive buffer was processed, there might better positions to send an ack back but only the lowcomms implementation know when there are more data to receive. This patch has also disadvantages that we might retransmit more on errors, however this is a very rare case. Tested with make_panic on gfs2 with three nodes by running: trace-cmd record -p function -l 'dlm_send_ack' sleep 100 and trace-cmd report | wc -l Before patch: - 20548 - 21376 - 21398 After patch: - 18338 - 20679 - 19949 Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> |