mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 04:31:50 +00:00
7a77db9551
1153395 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Michael Petlan
|
b50d691e50 |
perf test: Fix "all PMU test" to skip parametrized events
Parametrized events are not only a powerpc domain. They occur on other
platforms too (e.g. aarch64). They should be ignored in this testcase,
since proper setup of the parameters is out of scope of this script.
Let's not filter them out by PMU name, but rather based on the fact that
they expect a parameter.
Fixes:
|
||
Changbin Du
|
0c0a0db87e |
perf tools: Add .DELETE_ON_ERROR special Makefile target to clean up partially updated files on error.
As kbuild, this adds .DELETE_ON_ERROR special target to clean up partially updated files on error. A known issue is the empty vmlinux.h generted by bpftool if it failed to dump btf info. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221217225151.90387-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Namhyung Kim
|
cb459c89b7 |
perf test: Update 'perf lock contention' test
Add more tests for the new filters. $ sudo perf test contention -v 87: kernel lock contention analysis test : --- start --- test child forked, pid 412379 Testing perf lock record and perf lock contention Testing perf lock contention --use-bpf Testing perf lock record and perf lock contention at the same time Testing perf lock contention --threads Testing perf lock contention --lock-addr Testing perf lock contention --type-filter Testing perf lock contention --lock-filter test child finished with 0 ---- end ---- kernel lock contention analysis test: Ok Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Blake Jones <blakejones@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20221219201732.460111-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Namhyung Kim
|
5e3febe7b7 |
perf lock contention: Support lock addr/name filtering for BPF
Likewise, add addr_filter BPF hash map and check it with the lock
address.
$ sudo ./perf lock con -ab -L tasklist_lock -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.169 [sec]
contended total wait max wait avg wait type caller
18 174.09 us 25.31 us 9.67 us rwlock:W do_exit+0x36d
5 32.34 us 10.87 us 6.47 us rwlock:R do_wait+0x8b
4 15.41 us 4.73 us 3.85 us rwlock:W release_task+0x6e
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221219201732.460111-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
511e19b9e2 |
perf lock contention: Add -L/--lock-filter option
The -L/--lock-filter option is to filter only given locks. The locks
can be specified by address or name (if exists).
$ sudo ./perf lock record -a sleep 1
$ sudo ./perf lock con -l
contended total wait max wait avg wait address symbol
57 1.11 ms 42.83 us 19.54 us ffff9f4140059000
15 280.88 us 23.51 us 18.73 us ffffffff9d007a40 jiffies_lock
1 20.49 us 20.49 us 20.49 us ffffffff9d0d50c0 rcu_state
1 9.02 us 9.02 us 9.02 us ffff9f41759e9ba0
$ sudo ./perf lock con -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93
1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb
$ sudo ./perf lock con -L ffff9f4140059000
contended total wait max wait avg wait type caller
38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50
11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39
8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5
Committer testing:
# uname -a
Linux quaco 6.0.12-200.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Dec 8 17:15:53 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
# perf lock record
^C[ perf record: Woken up 1 times to write data ]
# perf lock con -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
# perf lock con
contended total wait max wait avg wait type caller
1 9.06 us 9.06 us 9.06 us spinlock call_timer_fn+0x24
# perf lock con -L call
ignore unknown symbol: call
contended total wait max wait avg wait type caller
1 9.06 us 9.06 us 9.06 us spinlock call_timer_fn+0x24
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221219201732.460111-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
529772c4df |
perf lock contention: Support lock type filtering for BPF
Likewise, add type_filter BPF hash map and check it when user gave a
lock type filter.
$ sudo ./perf lock con -ab -Y rwlock -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.203 [sec]
contended total wait max wait avg wait type caller
15 156.19 us 19.45 us 10.41 us rwlock:W do_exit+0x36d
1 11.12 us 11.12 us 11.12 us rwlock:R do_wait+0x8b
1 5.09 us 5.09 us 5.09 us rwlock:W release_task+0x6e
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221219201732.460111-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Namhyung Kim
|
b4a7eff93c |
perf lock contention: Add -Y/--type-filter option
The -Y/--type-filter option is to filter the result for specific lock
types only. It can accept comma-separated values. Note that it would
accept type names like one in the output. spinlock, mutex, rwsem:R and
so on.
For RW-variant lock types, it converts the name to the both variants.
In other words, "rwsem" is same as "rwsem:R,rwsem:W". Also note that
"mutex" has two different encoding - one for sleeping wait, another for
optimistic spinning. Add "mutex-spin" entry for the lock_type_table so
that we can add it for "mutex" under the table.
$ sudo ./perf lock record -a -- ./perf bench sched messaging
$ sudo ./perf lock con -E 5 -Y spinlock
contended total wait max wait avg wait type caller
802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62
13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14
12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27
114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5
83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e
Committer notes:
Make get_type_flag() return UINT_MAX for error instad of -1UL, as that
function returns 'unsigned int' and we store the value on a 'unsigned
int' 'flags' variable which makes clang unhappy:
35 98.23 fedora:37 : FAIL clang version 15.0.6 (Fedora 15.0.6-1.fc37)
builtin-lock.c:2012:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (flags != -1UL) {
~~~~~ ^ ~~~~
builtin-lock.c:2021:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (flags != -1UL) {
~~~~~ ^ ~~~~
builtin-lock.c:2037:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
if (flags != -1UL) {
~~~~~ ^ ~~~~
3 errors generated.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221219201732.460111-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Linus Torvalds
|
d264dd3bbb |
for-linus-2022122101
-----BEGIN PGP SIGNATURE----- iQJSBAABCAA8FiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmOjIFweHGJlbmphbWlu LnRpc3NvaXJlc0ByZWRoYXQuY29tAAoJEOzF8F4Z2Uo2CXAP/A3rYgaqacSqDFzp 9l2r0j3f7U5VqKxOf9aZeJZuNqBC0r/DDEkRa77qjixelRDIAT2j/xGIyItTzgCS R7qxqhGb0ju8VhPp2CpznYhbPfPjTGiMqV8VFWs8A35mLRV1OuklYWFtq+1EG0KD qxCrG7O0LX+GV3VpfWFLiiPOZOFt5JiVdGa6xrxvg9l5CViWFr/AvQ7fFQt4rs3i UPtNTbvIBOyQw1jyujLyO9mm2JpFT1EHCP2AM/5kAHpPmgIvL8m48AbOEUUby4Wh T78vYn4AvzyKMRibGqP3ezhonjfYFLx9Y2x9yxt/rk2DK0ooU5MpG1KUpj7RLQ/s R3LKzR8YZDOr+smkgk0+/1mu9eevFKOc4XJ7n4xb1z/tvnq/44Eslye4U+NuZEpq 82xtskuj5PhKliEv78rSZBgQ8IZ2zkhhM5Lknze5tDhgAc5jsZySJ1p6fPqj1Aef hYOWQkYFeoSLQ0iN/LGX8BBy8ezelqO1LBDaKTAxiBkoW0jV/gsEYjJDUI5hQ0C9 lw9jIGx/yUUvNeheni3PzBpPlWOEGKNOPJImupoXGHYUcsT6kRPUAjLFCd8BpNV/ tleKnzYQ+3DrcOomIqxH6p4bfGaVDGo+PLU8NswaFo/pYmA/4rKwHyK+R+semWbl ncAUZxXpGlkvFMPmY459AouVvKMm =JnpH -----END PGP SIGNATURE----- Merge tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Benjamin Tissoires: - Four potential NULL pointers dereferences (Bastien Nocera, Enrik Berkhan, Jiasheng Jiang and Roderick Colenbrander) - Allow Wacom devices in bootloader mode to be flashed (Jason Gerecke) - Some assorted devices quirks (José Expósito and Terry Junge) * tag 'for-linus-2022122101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: sony: Fix unused function warning HID: plantronics: Additional PIDs for double volume key presses quirk HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint HID: Ignore HP Envy x360 eu0009nv stylus battery HID: wacom: Ensure bootloader PID is usable in hidraw mode HID: amd_sfh: Add missing check for dma_alloc_coherent HID: playstation: fix free of uninialized pointer for DS4 in Bluetooth. HID: mcp2221: don't connect hidraw HID: logitech-hidpp: Guard FF init code against non-USB devices |
||
|
Linus Torvalds
|
5461e07900 |
media updates for v6.2-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmOi6/IACgkQCF8+vY7k 4RVitA//aYDptb3NLZu1eRdEepu+GUQs+gzUQW7L7wP6k1DFEhAm6KyiS/tvNQTb 3cIf16ACPOsDQC+R032RFG5nMCCPxPYyXmhVOQ4kLH54a8r6p7b38pMaNbAQlqBP ZjpfvWfnxrzyb8cNc90r9npo/K6Yq+JLkNRGYopr5FgUXQqRhhG1G9afYlB9GlWB /xgt8lgYBGAS39haZAj8ctOaPsMBBZQzrwDUKdKdE7PXPiFOqF2QfVHkr+UJyl8G KUtpVOeuO1Voqfr3MM0LRvSMlTOGT3+xFZgi7pLeP3AplrDX0fUTYd3jqwL8ATfU 60aCyl42zaJLMGCpVvw2qL8g1jF0mCcfgBSXDUyO4YcU5bXUHBuxHIfColCIE9UP iSG5+5RzXTpQEWWGlZINzvFblwQ9526WhPJw29d6pvoEKFHUK/SP7UeLChQpVv3A N8gwAIksAWJdu1P0V2W5oaMlt4H6XMkBoyM+I5aWeMA5udJu4zU0JPij2nJpQQ6W BOLBUKl/HKDKzzl3hs5HHRTxXQcI8qqmBabdeO9jimt4EWWP/N88u+roHLAxwVQL L2J4D4bxCa071UW2mn+GCWR3IgNSmTKRac1YYXQ6hLlyZfvvwqDM/rwPdNAGui01 wKLLwCoycK2s+379Onkg49AXx3bdGfu+ui1s+8SPmRtJHNAwpjg= =eOMl -----END PGP SIGNATURE----- Merge tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - A regression at V4L2 core breaking string controls - Build warning fixes on sun6i drivers when building with clang * tag 'media/v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: sun6i-isp: params: Unregister pending buffer on cleanup media: sun6i-isp: params: Fix incorrect indentation media: sun6i-isp: capture: Fix uninitialized variable use media: sun6i-isp: proc: Declare subdev ops as static media: sun6i-isp: proc: Error out on invalid port to fix warning media: sun6i-isp: proc: Fix return code handling in stream off path media: sun8i-a83t-mipi-csi2: Clarify return code handling in stream off path media: sun6i-mipi-csi2: Clarify return code handling in stream off path media: sun6i-csi: capture: Remove useless ret initialization media: sun6i-csi: bridge: Error out on invalid port to fix warning media: v4l2-ctrls-api.c: add back dropped ctrl->is_new = 1 |
||
|
Linus Torvalds
|
7a693ea78e |
pwm: Changes for v6.2-rc1
Various changes across the board, mostly improvements and cleanups. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmOi1qoZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoUNIEACLRuV3datmi1xBMt5ZVdLM YtSNYjPENbiMbcRHWV7MeOjLFeZN6LfhuV7phwagU3n53vMjR8SNogVf6X9HM7mA aRf98WcoVar+zikUoWkQE4m+F3/yAIm8ab2H62XVtXe+R+DdJHBcapxLIrqt1FvK XyUtcdwhr6VoY41MVN9RneXpAacPvX4fFuxa63xvlvhVGdgkENzqL02zBadQNgrg 6xsJGig0Irl4LiX9XjFB3PPEvSFeodszqubdqCuGHNXz9nymmTo0uVxrAWPhYHOv 1JhQQwRBDcFJqTrJcTGtREH1pmZOOneo/DYW5hNLxQpBCdD0aUD6GBhn81/zVLcj MBXpEWEesSV4Ng/fxu7EH/k0Db3l+SpNtotUlKVJv9/n3Ni1Xhkj9hgViWg+nN1w RfgOvWdI6xqKgsNUnR7w3JaTqtMsTw0YZpgMvfqlulkaxQ9Mj1tzfoFSQd06uteV bmslEGzl19EJPvWd0ttwrN6A1RHcxWl0ZbuAP5OnNscRQPl9vf4OMSpzkD4uBguu BuJy8r6UohEVrN+z4WB2mIEjkskFHTMLP4p/x85L97KjIzPl4Xy32mxFrt0SFJFr lMKXDeEhwba5zwWHgKbNQA2EK3FNCGAeYHWSXqxD2XpyNgiAoTQdzI30CPWqQwpB BPvwU8jT1CRFweG1J1fd8A== =IM51 -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes across the board, mostly improvements and cleanups" * tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits) pwm: pca9685: Convert to i2c's .probe_new() pwm: sun4i: Propagate errors in .get_state() to the caller pwm: Handle .get_state() failures pwm: sprd: Propagate errors in .get_state() to the caller pwm: rockchip: Propagate errors in .get_state() to the caller pwm: mtk-disp: Propagate errors in .get_state() to the caller pwm: imx27: Propagate errors in .get_state() to the caller pwm: cros-ec: Propagate errors in .get_state() to the caller pwm: crc: Propagate errors in .get_state() to the caller leds: qcom-lpg: Propagate errors in .get_state() to the caller drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller pwm/tracing: Also record trace events for failed API calls pwm: Make .get_state() callback return an error code pwm: pxa: Enable for MMP platform pwm: pxa: Add reference manual link and limitations pwm: pxa: Use abrupt shutdown mode pwm: pxa: Remove clk enable/disable from pxa_pwm_config pwm: pxa: Set duty cycle to 0 when disabling PWM pwm: pxa: Remove pxa_pwm_enable/disable pwm: mediatek: Add support for MT7986 ... |
||
|
Linus Torvalds
|
9cf5b508bd |
remoteproc updates for v6.2
rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmOh+HgVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FXYsQAILCBlk/0DFZNGDU1OJaK8P3JF4y /+w8P2kjD5ZABZ96vEnYQyXUj42/MbOtfvBApMYxkwV3rGyW4jQKXa4HF0+cjAyN TrcWGJ7fVeOEZm4fi/jhN+4xzOVOGev2bHQVaFlBYD5yLArC2WAe5eyETl7OqSur 0nZb0lLJ7nQAlSdlLYUFYoxYZz8aOTssyVQDdnKbtdc5DRL6R8d2+RTArtyY5gZI ri+JC1UMKuX6qk81PjjUzWRlDGt2+deeDntMnti1XJr2IX6CJuKsI/T0+KnLW/so +nlf7RCKvHivOyxw/Q7Qr2a15RKdtLGR+LI2iCiadzzCVoIs5KPUfqM8u5qAmo1w XM6/Jc0sdxXRBl31cTDNXbUEo5UjqXHZ96fhe4IZnoyUUm0ZiXkTF1GUMT+U/G6q aK654CQa6AkGocowVg0A5N4VX030hcGf3yb8WQDTHILvjLPZsqZpuk7IR8F9TE2U CW2cMVo3YXHvIVTrdZkBqzpvubtx28V6wNMKifihzWSKIrV4siYupGnmO0gKvJOe TX+EGZRUKIXpCzwye19hDYKFnyxpL+w9HU5ssiv47hYygL26MCVVlZ0Jm12fQqsh 2zmARVuNMY5+dGjcDL80LhQFRicaiQx4eOOI196ca8o5tl7ZtmvsCgZd23XcZ0Ws vsLAlnCKzNjjrF99 =sO5/ -----END PGP SIGNATURE----- Merge tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "rproc-virtio device names are now auto generated, to avoid conflicts between remoteproc instances. The imx_rproc driver is extended with support for communicating with and attaching to a running M4 on i.MX8QXP, as well as support for attaching to the M4 after self-recovering from a crash. Support is added for i.MX8QM and mailbox channels are reconnected during the recovery process, in order to avoid data corruption. The Xilinx Zynqmp firmware interface is extended and support for the Xilinx R5 RPU is introduced. Various resources leaks, primarily in error paths, throughout the Qualcomm drivers are corrected. Lastly a fix to ensure that pm_relax is invoked even if the remoteproc instance is stopped between a crash is being reported and the recovery handler is scheduled" * tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits) remoteproc: core: Do pm_relax when in RPROC_OFFLINE state remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on() remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region() remoteproc: qcom_q6v5_pas: detach power domains on remove remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio() remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() remoteproc: sysmon: Make QMI message rules const drivers: remoteproc: Add Xilinx r5 remoteproc driver firmware: xilinx: Add RPU configuration APIs firmware: xilinx: Add shutdown/wakeup APIs firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. arm64: dts: xilinx: zynqmp: Add RPU subsystem device node dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings remoteproc: core: Use device_match_of_node() remoteproc: imx_rproc: Correct i.MX93 DRAM mapping remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP remoteproc: imx_rproc: Request mbox channel later remoteproc: imx_rproc: Support i.MX8QM remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP ... |
||
|
Linus Torvalds
|
f2855eec19 |
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek: add mt8188 and mt8186 support
request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
-----BEGIN PGP SIGNATURE-----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=j33p
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
|
||
|
Linus Torvalds
|
ec34c2b4ec |
- Fix-ups
- Convert a bunch of I2C class drivers over to .probe_new() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmOhmzYACgkQUa+KL4f8 d2HwCw//T2WbB8K82gGV/lIJsasixahl9QRKgN9JOOTfNhKQPRiKTbnt5dsAdx5U zYzNElCeYbuL3qRKKfmlv8DVAjjqiYIbFwJc7u+NnrCWOBCPfzkukPapxO1tSWr7 kMIN0wkt1gyFwpRadx40vMuTlYpHLCVl7MIlY9yvvaO8OcfTnzghzVQVSHU7LcR3 oLat8/5xO+kPkoMP9WWgdbvqCGyd9jv7aQ51235gkEHesYtC8whIx8xsdjVTfPsF s8uiodw9l87AJ9+CfDkP5q32HUlnnAOqehHezT89N4iWTMpcYVdDjdSah4WijIxO HDVIfRJpgFtUm54mrwFWkUPzRtiPUWlO5pDi8bxb6F60LouB5cQD8/b3neNNO5+Q gveykHjPo1sM17ST2UHEz+vIuU5fZ4QtKhlaldu6vzymAd/Jt7cSnvHB+FWxPqJ1 ZK/JhiXSBOBm7CtSItma02jn2vDfTYPG65Z5zaaeUnJ2MutiWoHtoiGOrjGvIvYL xxbUgGh5CIrpjxKJoR8Btne0pB4IOloefdaRaTHM+5+8fsQZy3klsRPm+VCcQksz XczcjHUMs3SMLQj/JjO79Jv9QCz8pZzslswNNLY2ir7ROBUyY84RbcMSu06z6Sd7 ZqylRb8hWMGaWq0pg7iJ4kRYTAbFMncs27pBuTUOLO6ysisNoLE= =m+13 -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight update from Lee Jones: "Convert a bunch of I2C class drivers over to .probe_new()" * tag 'backlight-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa: Convert to i2c's .probe_new() backlight: lv5207lp: Convert to i2c's .probe_new() backlight: lp855x: Convert to i2c's .probe_new() backlight: lm3639: Convert to i2c's .probe_new() backlight: lm3630a: Convert to i2c's .probe_new() backlight: bd6107: Convert to i2c's .probe_new() backlight: arcxcnn: Convert to i2c's .probe_new() backlight: adp8870: Convert to i2c's .probe_new() backlight: adp8860: Convert to i2c's .probe_new() |
||
|
Linus Torvalds
|
7406fd75a9 |
- New Drivers
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
- New Functionality
- Add support for multiple devices of the same type; rk808
- Fix-ups
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
- Bug Fixes
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008
-----BEGIN PGP SIGNATURE-----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=HT19
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
|
||
|
Linus Torvalds
|
7c08461253 |
m68k: remove broken strcmp implementation
The m68 hand-written assembler version of strcmp() has always been
broken: it returns the difference between the first non-matching byte
done as a 8-bit subtraction.
That is _almost_ right, but is broken for the overflow case. The
strcmp() function should indeed return the sign of the difference
between the first byte that differs, but the subtraction needs to be
done in a wider type than 'char'. Otherwise the ordering isn't actually
stable.
This went unnoticed for basically forever, because nobody ever cares
about non-US-ASCII orderings in the kernel (in fact, most users only
care about "exact match or not"), so overflows don't really happen in
practice, even if it was very very wrong.
But that mostly unnoticeable bug becomes very noticeable by the recent
change to make 'char' be unsigned in the kernel across all architectures
(commit
|
||
|
Linus Torvalds
|
609d3bc623 |
Including fixes from bpf, netfilter and can.
Current release - regressions:
- bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func
- rxrpc:
- fix security setting propagation
- fix null-deref in rxrpc_unuse_local()
- fix switched parameters in peer tracing
Current release - new code bugs:
- rxrpc:
- fix I/O thread startup getting skipped
- fix locking issues in rxrpc_put_peer_locked()
- fix I/O thread stop
- fix uninitialised variable in rxperf server
- fix the return value of rxrpc_new_incoming_call()
- microchip: vcap: fix initialization of value and mask
- nfp: fix unaligned io read of capabilities word
Previous releases - regressions:
- stop in-kernel socket users from corrupting socket's task_frag
- stream: purge sk_error_queue in sk_stream_kill_queues()
- openvswitch: fix flow lookup to use unmasked key
- dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()
- devlink:
- hold region lock when flushing snapshots
- protect devlink dump by the instance lock
Previous releases - always broken:
- bpf:
- prevent leak of lsm program after failed attach
- resolve fext program type when checking map compatibility
- skbuff: account for tail adjustment during pull operations
- macsec: fix net device access prior to holding a lock
- bonding: switch back when high prio link up
- netfilter: flowtable: really fix NAT IPv6 offload
- enetc: avoid buffer leaks on xdp_do_redirect() failure
- unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
- dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=goV5
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter and can.
Current release - regressions:
- bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func
- rxrpc:
- fix security setting propagation
- fix null-deref in rxrpc_unuse_local()
- fix switched parameters in peer tracing
Current release - new code bugs:
- rxrpc:
- fix I/O thread startup getting skipped
- fix locking issues in rxrpc_put_peer_locked()
- fix I/O thread stop
- fix uninitialised variable in rxperf server
- fix the return value of rxrpc_new_incoming_call()
- microchip: vcap: fix initialization of value and mask
- nfp: fix unaligned io read of capabilities word
Previous releases - regressions:
- stop in-kernel socket users from corrupting socket's task_frag
- stream: purge sk_error_queue in sk_stream_kill_queues()
- openvswitch: fix flow lookup to use unmasked key
- dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port()
- devlink:
- hold region lock when flushing snapshots
- protect devlink dump by the instance lock
Previous releases - always broken:
- bpf:
- prevent leak of lsm program after failed attach
- resolve fext program type when checking map compatibility
- skbuff: account for tail adjustment during pull operations
- macsec: fix net device access prior to holding a lock
- bonding: switch back when high prio link up
- netfilter: flowtable: really fix NAT IPv6 offload
- enetc: avoid buffer leaks on xdp_do_redirect() failure
- unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()
- dsa: microchip: remove IRQF_TRIGGER_FALLING in
request_threaded_irq"
* tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
net: fec: check the return value of build_skb()
net: simplify sk_page_frag
Treewide: Stop corrupting socket's task_frag
net: Introduce sk_use_task_frag in struct sock.
mctp: Remove device type check at unregister
net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq
can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len
can: flexcan: avoid unbalanced pm_runtime_enable warning
Documentation: devlink: add missing toc entry for etas_es58x devlink doc
mctp: serial: Fix starting value for frame check sequence
nfp: fix unaligned io read of capabilities word
net: stream: purge sk_error_queue in sk_stream_kill_queues()
myri10ge: Fix an error handling path in myri10ge_probe()
net: microchip: vcap: Fix initialization of value and mask
rxrpc: Fix the return value of rxrpc_new_incoming_call()
rxrpc: rxperf: Fix uninitialised variable
rxrpc: Fix I/O thread stop
rxrpc: Fix switched parameters in peer tracing
rxrpc: Fix locking issues in rxrpc_put_peer_locked()
rxrpc: Fix I/O thread startup getting skipped
...
|
||
|
Linus Torvalds
|
878cf96f68 |
fs.vfsuid.ima.v6.2-rc1
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY6HAHgAKCRCRxhvAZXjc
ou/mAQDDaks5QRtDT88OAI1fMWhSz9IZHsxCOeNQ1hdvWvKZkQD+LCbjmRFG3aB4
Br7ZjHSmVDug/pQEV6FVDg4LpwYZUQo=
=Sab+
-----END PGP SIGNATURE-----
Merge tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid cleanup from Christian Brauner:
"This moves the ima specific vfs{g,u}id_t comparison helpers out of the
header and into the one file in ima where they are used.
We shouldn't incentivize people to use them by placing them into the
header. As discussed and suggested by Linus in [1] let's just define
them locally in the one file in ima where they are used"
Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]
* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
mnt_idmapping: move ima-only helpers to ima
|
||
|
Linus Torvalds
|
222882c2ab |
Random number generator fixes for Linux 6.2-rc1.
-----BEGIN PGP SIGNATURE-----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=IBNq
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"Two remaining changes that are now possible after you merged a few
other trees:
- #include <asm/archrandom.h> can be removed from random.h now,
making the direct use of the arch_random_* API more of a private
implementation detail between the archs and random.c, rather than
something for general consumers.
- Two additional uses of prandom_u32_max() snuck in during the
initial phase of pulls, so these have been converted to
get_random_u32_below(), and now the deprecated prandom_u32_max()
alias -- which was just a wrapper around get_random_u32_below() --
can be removed.
In addition, there is one fix:
- Check efi_rt_services_supported() before attempting to use an EFI
runtime function.
This affected EFI systems that disable runtime services yet still
boot via EFI (e.g. the reporter's Lenovo Thinkpad X13s laptop), as
well systems where EFI runtime services have been forcibly
disabled, such as on PREEMPT_RT.
On those machines, a very early and hard to diagnose crash would
happen, preventing boot"
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove prandom_u32_max()
efi: random: fix NULL-deref when refreshing seed
random: do not include <asm/archrandom.h> from random.h
|
||
|
Linus Torvalds
|
19822e3ee4 |
Urgent RCU pull request for v6.2
This commit fixes a lockdep false positive in synchronize_rcu() that can otherwise occur during early boot. Theis fix simply avoids invoking lockdep if the scheduler has not yet been initialized, that is, during that portion of boot when interrupts are disabled. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmOeXj8THHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jPmZEACaI5JqO6Dr2U4HojJJBYEfLVaSYxDp JrUi5D5WzzZidyjM2fyyZZkdRVQ24i1aV2H/fbLoIIH/smYjE/KLEFHQmclpphw5 BSOyapotjdt5YhIavvAeOjdUd7jPyMqhbDVnwzjnblhUD1ObLVlhIs8Pjn7/03sF gzlIhYgp3EL7GenT9j9kud2FwWP+wrVQ7SdJ+Ni/WAHYO8860xQAmFXH/07bYzx7 fbp5iPkCOSSUoRMw/qQ8s7CE3XhBNKufv1BtcvV/uxEtutfV1qvEQBv/l2RBd0Vg wOVBZnWXze+7IUx13M90R/d04Nn7RaGwon6xBMlvIwL3qzEj8x/r1FYz7zZhQPkv wwChAxFHQACnLCZSu48WBtVrawNdZHM57KHUK4rloAbrK92FpVznhQU+5pBDy4c6 rfY2my+SNO4kWvePEg/2fd8aQycrZr99fK/ojCIerEn8MNboxuVOYTjzy0qtUcVT yJ/80O8ADI3QL/NRhjMFWgEnBDbHN1PcGhiRoutApdLQkg/UPTJjCRZ7ibmIFYY2 ViW3cSndr/f0I7sOex2EILHwiZ2bUKiwyeTW6vWuFl/7MEWsvpJaWoUxXgQj99Bt ncAOaxtmmuhbwrOCt2kab90A0c/thNx9kNYYIkG3vUNcSRzyHQtg3ydEljBpaTFR OzhrqdUA7W9Sfg== =UKUo -----END PGP SIGNATURE----- Merge tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This fixes a lockdep false positive in synchronize_rcu() that can otherwise occur during early boot. The fix simply avoids invoking lockdep if the scheduler has not yet been initialized, that is, during that portion of boot when interrupts are disabled" * tag 'rcu-urgent.2022.12.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Don't assert interrupts enabled too early in boot |
||
Christian Brauner
|
11933cf1d9
|
pnode: terminate at peers of source
The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers of
@source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves in
the destination propagation tree causing a NULL dereference.
Once the mechanics of the bug are understood it's easy to trigger.
Because of unprivileged user namespaces it is available to unprivileged
users.
While fixing this bug we've gotten confused multiple times due to
unclear terminology or missing concepts. So let's start this with some
clarifications:
* The terms "master" or "peer" denote a shared mount. A shared mount
belongs to a peer group.
* A peer group is a set of shared mounts that propagate to each other.
They are identified by a peer group id. The peer group id is available
in @shared_mnt->mnt_group_id.
Shared mounts within the same peer group have the same peer group id.
The peers in a peer group can be reached via @shared_mnt->mnt_share.
* The terms "slave mount" or "dependent mount" denote a mount that
receives propagation from a peer in a peer group. IOW, shared mounts
may have slave mounts and slave mounts have shared mounts as their
master. Slave mounts of a given peer in a peer group are listed on
that peers slave list available at @shared_mnt->mnt_slave_list.
* The term "master mount" denotes a mount in a peer group. IOW, it
denotes a shared mount or a peer mount in a peer group. The term
"master mount" - or "master" for short - is mostly used when talking
in the context of slave mounts that receive propagation from a master
mount. A master mount of a slave identifies the closest peer group a
slave mount receives propagation from. The master mount of a slave can
be identified via @slave_mount->mnt_master. Different slaves may point
to different masters in the same peer group.
* Multiple peers in a peer group can have non-empty ->mnt_slave_lists.
Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to
ensure all slave mounts of a peer group are visited the
->mnt_slave_lists of all peers in a peer group have to be walked.
* Slave mounts point to a peer in the closest peer group they receive
propagation from via @slave_mnt->mnt_master (see above). Together with
these peers they form a propagation group (see below). The closest
peer group can thus be identified through the peer group id
@slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave
mount receives propagation from.
* A shared-slave mount is a slave mount to a peer group pg1 while also
a peer in another peer group pg2. IOW, a peer group may receive
propagation from another peer group.
If a peer group pg1 is a slave to another peer group pg2 then all
peers in peer group pg1 point to the same peer in peer group pg2 via
->mnt_master. IOW, all peers in peer group pg1 appear on the same
->mnt_slave_list. IOW, they cannot be slaves to different peer groups.
* A pure slave mount is a slave mount that is a slave to a peer group
but is not a peer in another peer group.
* A propagation group denotes the set of mounts consisting of a single
peer group pg1 and all slave mounts and shared-slave mounts that point
to a peer in that peer group via ->mnt_master. IOW, all slave mounts
such that @slave_mnt->mnt_master->mnt_group_id is equal to
@shared_mnt->mnt_group_id.
The concept of a propagation group makes it easier to talk about a
single propagation level in a propagation tree.
For example, in propagate_mnt() the immediate peers of @dest_mnt and
all slaves of @dest_mnt's peer group form a propagation group propg1.
So a shared-slave mount that is a slave in propg1 and that is a peer
in another peer group pg2 forms another propagation group propg2
together with all slaves that point to that shared-slave mount in
their ->mnt_master.
* A propagation tree refers to all mounts that receive propagation
starting from a specific shared mount.
For example, for propagate_mnt() @dest_mnt is the start of a
propagation tree. The propagation tree ecompasses all mounts that
receive propagation from @dest_mnt's peer group down to the leafs.
With that out of the way let's get to the actual algorithm.
We know that @dest_mnt is guaranteed to be a pure shared mount or a
shared-slave mount. This is guaranteed by a check in
attach_recursive_mnt(). So propagate_mnt() will first propagate the
source mount tree to all peers in @dest_mnt's peer group:
for (n = next_peer(dest_mnt); n != dest_mnt; n = next_peer(n)) {
ret = propagate_one(n);
if (ret)
goto out;
}
Notice, that the peer propagation loop of propagate_mnt() doesn't
propagate @dest_mnt itself. @dest_mnt is mounted directly in
attach_recursive_mnt() after we propagated to the destination
propagation tree.
The mount that will be mounted on top of @dest_mnt is @source_mnt. This
copy was created earlier even before we entered attach_recursive_mnt()
and doesn't concern us a lot here.
It's just important to notice that when propagate_mnt() is called
@source_mnt will not yet have been mounted on top of @dest_mnt. Thus,
@source_mnt->mnt_parent will either still point to @source_mnt or - in
the case @source_mnt is moved and thus already attached - still to its
former parent.
For each peer @m in @dest_mnt's peer group propagate_one() will create a
new copy of the source mount tree and mount that copy @child on @m such
that @child->mnt_parent points to @m after propagate_one() returns.
propagate_one() will stash the last destination propagation node @m in
@last_dest and the last copy it created for the source mount tree in
@last_source.
Hence, if we call into propagate_one() again for the next destination
propagation node @m, @last_dest will point to the previous destination
propagation node and @last_source will point to the previous copy of the
source mount tree and mounted on @last_dest.
Each new copy of the source mount tree is created from the previous copy
of the source mount tree. This will become important later.
The peer loop in propagate_mnt() is straightforward. We iterate through
the peers copying and updating @last_source and @last_dest as we go
through them and mount each copy of the source mount tree @child on a
peer @m in @dest_mnt's peer group.
After propagate_mnt() handled the peers in @dest_mnt's peer group
propagate_mnt() will propagate the source mount tree down the
propagation tree that @dest_mnt's peer group propagates to:
for (m = next_group(dest_mnt, dest_mnt); m;
m = next_group(m, dest_mnt)) {
/* everything in that slave group */
n = m;
do {
ret = propagate_one(n);
if (ret)
goto out;
n = next_peer(n);
} while (n != m);
}
The next_group() helper will recursively walk the destination
propagation tree, descending into each propagation group of the
propagation tree.
The important part is that it takes care to propagate the source mount
tree to all peers in the peer group of a propagation group before it
propagates to the slaves to those peers in the propagation group. IOW,
it creates and mounts copies of the source mount tree that become
masters before it creates and mounts copies of the source mount tree
that become slaves to these masters.
It is important to remember that propagating the source mount tree to
each mount @m in the destination propagation tree simply means that we
create and mount new copies @child of the source mount tree on @m such
that @child->mnt_parent points to @m.
Since we know that each node @m in the destination propagation tree
headed by @dest_mnt's peer group will be overmounted with a copy of the
source mount tree and since we know that the propagation properties of
each copy of the source mount tree we create and mount at @m will mostly
mirror the propagation properties of @m. We can use that information to
create and mount the copies of the source mount tree that become masters
before their slaves.
The easy case is always when @m and @last_dest are peers in a peer group
of a given propagation group. In that case we know that we can simply
copy @last_source without having to figure out what the master for the
new copy @child of the source mount tree needs to be as we've done that
in a previous call to propagate_one().
The hard case is when we're dealing with a slave mount or a shared-slave
mount @m in a destination propagation group that we need to create and
mount a copy of the source mount tree on.
For each propagation group in the destination propagation tree we
propagate the source mount tree to we want to make sure that the copies
@child of the source mount tree we create and mount on slaves @m pick an
ealier copy of the source mount tree that we mounted on a master @m of
the destination propagation group as their master. This is a mouthful
but as far as we can tell that's the core of it all.
But, if we keep track of the masters in the destination propagation tree
@m we can use the information to find the correct master for each copy
of the source mount tree we create and mount at the slaves in the
destination propagation tree @m.
Let's walk through the base case as that's still fairly easy to grasp.
If we're dealing with the first slave in the propagation group that
@dest_mnt is in then we don't yet have marked any masters in the
destination propagation tree.
We know the master for the first slave to @dest_mnt's peer group is
simple @dest_mnt. So we expect this algorithm to yield a copy of the
source mount tree that was mounted on a peer in @dest_mnt's peer group
as the master for the copy of the source mount tree we want to mount at
the first slave @m:
for (n = m; ; n = p) {
p = n->mnt_master;
if (p == dest_master || IS_MNT_MARKED(p))
break;
}
For the first slave we walk the destination propagation tree all the way
up to a peer in @dest_mnt's peer group. IOW, the propagation hierarchy
can be walked by walking up the @mnt->mnt_master hierarchy of the
destination propagation tree @m. We will ultimately find a peer in
@dest_mnt's peer group and thus ultimately @dest_mnt->mnt_master.
Btw, here the assumption we listed at the beginning becomes important.
Namely, that peers in a peer group pg1 that are slaves in another peer
group pg2 appear on the same ->mnt_slave_list. IOW, all slaves who are
peers in peer group pg1 point to the same peer in peer group pg2 via
their ->mnt_master. Otherwise the termination condition in the code
above would be wrong and next_group() would be broken too.
So the first iteration sets:
n = m;
p = n->mnt_master;
such that @p now points to a peer or @dest_mnt itself. We walk up one
more level since we don't have any marked mounts. So we end up with:
n = dest_mnt;
p = dest_mnt->mnt_master;
If @dest_mnt's peer group is not slave to another peer group then @p is
now NULL. If @dest_mnt's peer group is a slave to another peer group
then @p now points to @dest_mnt->mnt_master points which is a master
outside the propagation tree we're dealing with.
Now we need to figure out the master for the copy of the source mount
tree we're about to create and mount on the first slave of @dest_mnt's
peer group:
do {
struct mount *parent = last_source->mnt_parent;
if (last_source == first_source)
break;
done = parent->mnt_master == p;
if (done && peers(n, parent))
break;
last_source = last_source->mnt_master;
} while (!done);
We know that @last_source->mnt_parent points to @last_dest and
@last_dest is the last peer in @dest_mnt's peer group we propagated to
in the peer loop in propagate_mnt().
Consequently, @last_source is the last copy we created and mount on that
last peer in @dest_mnt's peer group. So @last_source is the master we
want to pick.
We know that @last_source->mnt_parent->mnt_master points to
@last_dest->mnt_master. We also know that @last_dest->mnt_master is
either NULL or points to a master outside of the destination propagation
tree and so does @p. Hence:
done = parent->mnt_master == p;
is trivially true in the base condition.
We also know that for the first slave mount of @dest_mnt's peer group
that @last_dest either points @dest_mnt itself because it was
initialized to:
last_dest = dest_mnt;
at the beginning of propagate_mnt() or it will point to a peer of
@dest_mnt in its peer group. In both cases it is guaranteed that on the
first iteration @n and @parent are peers (Please note the check for
peers here as that's important.):
if (done && peers(n, parent))
break;
So, as we expected, we select @last_source, which referes to the last
copy of the source mount tree we mounted on the last peer in @dest_mnt's
peer group, as the master of the first slave in @dest_mnt's peer group.
The rest is taken care of by clone_mnt(last_source, ...). We'll skip
over that part otherwise this becomes a blogpost.
At the end of propagate_mnt() we now mark @m->mnt_master as the first
master in the destination propagation tree that is distinct from
@dest_mnt->mnt_master. IOW, we mark @dest_mnt itself as a master.
By marking @dest_mnt or one of it's peers we are able to easily find it
again when we later lookup masters for other copies of the source mount
tree we mount copies of the source mount tree on slaves @m to
@dest_mnt's peer group. This, in turn allows us to find the master we
selected for the copies of the source mount tree we mounted on master in
the destination propagation tree again.
The important part is to realize that the code makes use of the fact
that the last copy of the source mount tree stashed in @last_source was
mounted on top of the previous destination propagation node @last_dest.
What this means is that @last_source allows us to walk the destination
propagation hierarchy the same way each destination propagation node @m
does.
If we take @last_source, which is the copy of @source_mnt we have
mounted on @last_dest in the previous iteration of propagate_one(), then
we know @last_source->mnt_parent points to @last_dest but we also know
that as we walk through the destination propagation tree that
@last_source->mnt_master will point to an earlier copy of the source
mount tree we mounted one an earlier destination propagation node @m.
IOW, @last_source->mnt_parent will be our hook into the destination
propagation tree and each consecutive @last_source->mnt_master will lead
us to an earlier propagation node @m via
@last_source->mnt_master->mnt_parent.
Hence, by walking up @last_source->mnt_master, each of which is mounted
on a node that is a master @m in the destination propagation tree we can
also walk up the destination propagation hierarchy.
So, for each new destination propagation node @m we use the previous
copy of @last_source and the fact it's mounted on the previous
propagation node @last_dest via @last_source->mnt_master->mnt_parent to
determine what the master of the new copy of @last_source needs to be.
The goal is to find the _closest_ master that the new copy of the source
mount tree we are about to create and mount on a slave @m in the
destination propagation tree needs to pick. IOW, we want to find a
suitable master in the propagation group.
As the propagation structure of the source mount propagation tree we
create mirrors the propagation structure of the destination propagation
tree we can find @m's closest master - i.e., a marked master - which is
a peer in the closest peer group that @m receives propagation from. We
store that closest master of @m in @p as before and record the slave to
that master in @n
We then search for this master @p via @last_source by walking up the
master hierarchy starting from the last copy of the source mount tree
stored in @last_source that we created and mounted on the previous
destination propagation node @m.
We will try to find the master by walking @last_source->mnt_master and
by comparing @last_source->mnt_master->mnt_parent->mnt_master to @p. If
we find @p then we can figure out what earlier copy of the source mount
tree needs to be the master for the new copy of the source mount tree
we're about to create and mount at the current destination propagation
node @m.
If @last_source->mnt_master->mnt_parent and @n are peers then we know
that the closest master they receive propagation from is
@last_source->mnt_master->mnt_parent->mnt_master. If not then the
closest immediate peer group that they receive propagation from must be
one level higher up.
This builds on the earlier clarification at the beginning that all peers
in a peer group which are slaves of other peer groups all point to the
same ->mnt_master, i.e., appear on the same ->mnt_slave_list, of the
closest peer group that they receive propagation from.
However, terminating the walk has corner cases.
If the closest marked master for a given destination node @m cannot be
found by walking up the master hierarchy via @last_source->mnt_master
then we need to terminate the walk when we encounter @source_mnt again.
This isn't an arbitrary termination. It simply means that the new copy
of the source mount tree we're about to create has a copy of the source
mount tree we created and mounted on a peer in @dest_mnt's peer group as
its master. IOW, @source_mnt is the peer in the closest peer group that
the new copy of the source mount tree receives propagation from.
We absolutely have to stop @source_mnt because @last_source->mnt_master
either points outside the propagation hierarchy we're dealing with or it
is NULL because @source_mnt isn't a shared-slave.
So continuing the walk past @source_mnt would cause a NULL dereference
via @last_source->mnt_master->mnt_parent. And so we have to stop the
walk when we encounter @source_mnt again.
One scenario where this can happen is when we first handled a series of
slaves of @dest_mnt's peer group and then encounter peers in a new peer
group that is a slave to @dest_mnt's peer group. We handle them and then
we encounter another slave mount to @dest_mnt that is a pure slave to
@dest_mnt's peer group. That pure slave will have a peer in @dest_mnt's
peer group as its master. Consequently, the new copy of the source mount
tree will need to have @source_mnt as it's master. So we walk the
propagation hierarchy all the way up to @source_mnt based on
@last_source->mnt_master.
So terminate on @source_mnt, easy peasy. Except, that the check misses
something that the rest of the algorithm already handles.
If @dest_mnt has peers in it's peer group the peer loop in
propagate_mnt():
for (n = next_peer(dest_mnt); n != dest_mnt; n = next_peer(n)) {
ret = propagate_one(n);
if (ret)
goto out;
}
will consecutively update @last_source with each previous copy of the
source mount tree we created and mounted at the previous peer in
@dest_mnt's peer group. So after that loop terminates @last_source will
point to whatever copy of the source mount tree was created and mounted
on the last peer in @dest_mnt's peer group.
Furthermore, if there is even a single additional peer in @dest_mnt's
peer group then @last_source will __not__ point to @source_mnt anymore.
Because, as we mentioned above, @dest_mnt isn't even handled in this
loop but directly in attach_recursive_mnt(). So it can't even accidently
come last in that peer loop.
So the first time we handle a slave mount @m of @dest_mnt's peer group
the copy of the source mount tree we create will make the __last copy of
the source mount tree we created and mounted on the last peer in
@dest_mnt's peer group the master of the new copy of the source mount
tree we create and mount on the first slave of @dest_mnt's peer group__.
But this means that the termination condition that checks for
@source_mnt is wrong. The @source_mnt cannot be found anymore by
propagate_one(). Instead it will find the last copy of the source mount
tree we created and mounted for the last peer of @dest_mnt's peer group
again. And that is a peer of @source_mnt not @source_mnt itself.
IOW, we fail to terminate the loop correctly and ultimately dereference
@last_source->mnt_master->mnt_parent. When @source_mnt's peer group
isn't slave to another peer group then @last_source->mnt_master is NULL
causing the splat below.
For example, assume @dest_mnt is a pure shared mount and has three peers
in its peer group:
===================================================================================
mount-id mount-parent-id peer-group-id
===================================================================================
(@dest_mnt) mnt_master[216] 309 297 shared:216
\
(@source_mnt) mnt_master[218]: 609 609 shared:218
(1) mnt_master[216]: 607 605 shared:216
\
(P1) mnt_master[218]: 624 607 shared:218
(2) mnt_master[216]: 576 574 shared:216
\
(P2) mnt_master[218]: 625 576 shared:218
(3) mnt_master[216]: 545 543 shared:216
\
(P3) mnt_master[218]: 626 545 shared:218
After this sequence has been processed @last_source will point to (P3),
the copy generated for the third peer in @dest_mnt's peer group we
handled. So the copy of the source mount tree (P4) we create and mount
on the first slave of @dest_mnt's peer group:
===================================================================================
mount-id mount-parent-id peer-group-id
===================================================================================
mnt_master[216] 309 297 shared:216
/
/
(S0) mnt_slave 483 481 master:216
\
\ (P3) mnt_master[218] 626 545 shared:218
\ /
\/
(P4) mnt_slave 627 483 master:218
will pick the last copy of the source mount tree (P3) as master, not (S0).
When walking the propagation hierarchy via @last_source's master
hierarchy we encounter (P3) but not (S0), i.e., @source_mnt.
We can fix this in multiple ways:
(1) By setting @last_source to @source_mnt after we processed the peers
in @dest_mnt's peer group right after the peer loop in
propagate_mnt().
(2) By changing the termination condition that relies on finding exactly
@source_mnt to finding a peer of @source_mnt.
(3) By only moving @last_source when we actually venture into a new peer
group or some clever variant thereof.
The first two options are minimally invasive and what we want as a fix.
The third option is more intrusive but something we'd like to explore in
the near future.
This passes all LTP tests and specifically the mount propagation
testsuite part of it. It also holds up against all known reproducers of
this issues.
Final words.
First, this is a clever but __worringly__ underdocumented algorithm.
There isn't a single detailed comment to be found in next_group(),
propagate_one() or anywhere else in that file for that matter. This has
been a giant pain to understand and work through and a bug like this is
insanely difficult to fix without a detailed understanding of what's
happening. Let's not talk about the amount of time that was sunk into
fixing this.
Second, all the cool kids with access to
unshare --mount --user --map-root --propagation=unchanged
are going to have a lot of fun. IOW, triggerable by unprivileged users
while namespace_lock() lock is held.
[ 115.848393] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ 115.848967] #PF: supervisor read access in kernel mode
[ 115.849386] #PF: error_code(0x0000) - not-present page
[ 115.849803] PGD 0 P4D 0
[ 115.850012] Oops: 0000 [#1] PREEMPT SMP PTI
[ 115.850354] CPU: 0 PID: 15591 Comm: mount Not tainted 6.1.0-rc7 #3
[ 115.850851] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 115.851510] RIP: 0010:propagate_one.part.0+0x7f/0x1a0
[ 115.851924] Code: 75 eb 4c 8b 05 c2 25 37 02 4c 89 ca 48 8b 4a 10
49 39 d0 74 1e 48 3b 81 e0 00 00 00 74 26 48 8b 92 e0 00 00 00 be 01
00 00 00 <48> 8b 4a 10 49 39 d0 75 e2 40 84 f6 74 38 4c 89 05 84 25 37
02 4d
[ 115.853441] RSP: 0018:ffffb8d5443d7d50 EFLAGS: 00010282
[ 115.853865] RAX: ffff8e4d87c41c80 RBX: ffff8e4d88ded780 RCX: ffff8e4da4333a00
[ 115.854458] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e4d88ded780
[ 115.855044] RBP: ffff8e4d88ded780 R08: ffff8e4da4338000 R09: ffff8e4da43388c0
[ 115.855693] R10: 0000000000000002 R11: ffffb8d540158000 R12: ffffb8d5443d7da8
[ 115.856304] R13: ffff8e4d88ded780 R14: 0000000000000000 R15: 0000000000000000
[ 115.856859] FS: 00007f92c90c9800(0000) GS:ffff8e4dfdc00000(0000)
knlGS:0000000000000000
[ 115.857531] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 115.858006] CR2: 0000000000000010 CR3: 0000000022f4c002 CR4: 00000000000706f0
[ 115.858598] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 115.859393] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 115.860099] Call Trace:
[ 115.860358] <TASK>
[ 115.860535] propagate_mnt+0x14d/0x190
[ 115.860848] attach_recursive_mnt+0x274/0x3e0
[ 115.861212] path_mount+0x8c8/0xa60
[ 115.861503] __x64_sys_mount+0xf6/0x140
[ 115.861819] do_syscall_64+0x5b/0x80
[ 115.862117] ? do_faccessat+0x123/0x250
[ 115.862435] ? syscall_exit_to_user_mode+0x17/0x40
[ 115.862826] ? do_syscall_64+0x67/0x80
[ 115.863133] ? syscall_exit_to_user_mode+0x17/0x40
[ 115.863527] ? do_syscall_64+0x67/0x80
[ 115.863835] ? do_syscall_64+0x67/0x80
[ 115.864144] ? do_syscall_64+0x67/0x80
[ 115.864452] ? exc_page_fault+0x70/0x170
[ 115.864775] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 115.865187] RIP: 0033:0x7f92c92b0ebe
[ 115.865480] Code: 48 8b 0d 75 4f 0c 00 f7 d8 64 89 01 48 83 c8 ff
c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 42 4f 0c 00 f7 d8 64 89
01 48
[ 115.866984] RSP: 002b:00007fff000aa728 EFLAGS: 00000246 ORIG_RAX:
00000000000000a5
[ 115.867607] RAX: ffffffffffffffda RBX: 000055a77888d6b0 RCX: 00007f92c92b0ebe
[ 115.868240] RDX: 000055a77888d8e0 RSI: 000055a77888e6e0 RDI: 000055a77888e620
[ 115.868823] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
[ 115.869403] R10: 0000000000001000 R11: 0000000000000246 R12: 000055a77888e620
[ 115.869994] R13: 000055a77888d8e0 R14: 00000000ffffffff R15: 00007f92c93e4076
[ 115.870581] </TASK>
[ 115.870763] Modules linked in: nft_fib_inet nft_fib_ipv4
nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6
nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink qrtr snd_intel8x0
sunrpc snd_ac97_codec ac97_bus snd_pcm snd_timer intel_rapl_msr
intel_rapl_common snd vboxguest intel_powerclamp video rapl joydev
soundcore i2c_piix4 wmi fuse zram xfs vmwgfx crct10dif_pclmul
crc32_pclmul crc32c_intel polyval_clmulni polyval_generic
drm_ttm_helper ttm e1000 ghash_clmulni_intel serio_raw ata_generic
pata_acpi scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_multipath
[ 115.875288] CR2: 0000000000000010
[ 115.875641] ---[ end trace 0000000000000000 ]---
[ 115.876135] RIP: 0010:propagate_one.part.0+0x7f/0x1a0
[ 115.876551] Code: 75 eb 4c 8b 05 c2 25 37 02 4c 89 ca 48 8b 4a 10
49 39 d0 74 1e 48 3b 81 e0 00 00 00 74 26 48 8b 92 e0 00 00 00 be 01
00 00 00 <48> 8b 4a 10 49 39 d0 75 e2 40 84 f6 74 38 4c 89 05 84 25 37
02 4d
[ 115.878086] RSP: 0018:ffffb8d5443d7d50 EFLAGS: 00010282
[ 115.878511] RAX: ffff8e4d87c41c80 RBX: ffff8e4d88ded780 RCX: ffff8e4da4333a00
[ 115.879128] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e4d88ded780
[ 115.879715] RBP: ffff8e4d88ded780 R08: ffff8e4da4338000 R09: ffff8e4da43388c0
[ 115.880359] R10: 0000000000000002 R11: ffffb8d540158000 R12: ffffb8d5443d7da8
[ 115.880962] R13: ffff8e4d88ded780 R14: 0000000000000000 R15: 0000000000000000
[ 115.881548] FS: 00007f92c90c9800(0000) GS:ffff8e4dfdc00000(0000)
knlGS:0000000000000000
[ 115.882234] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 115.882713] CR2: 0000000000000010 CR3: 0000000022f4c002 CR4: 00000000000706f0
[ 115.883314] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 115.883966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes:
|
||
Florian Fainelli
|
24b333a866 |
MIPS: dts: bcm63268: Add missing properties to the TWD node
We currently have a DTC warning with the current DTS due to the lack of
a suitable #address-cells and #size-cells property:
DTC arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dtb
arch/mips/boot/dts/brcm/bcm63268.dtsi:115.5-22: Warning (reg_format): /ubus/timer-mfd@10000080/timer@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/mips/boot/dts/brcm/bcm63268.dtsi:120.5-22: Warning (reg_format): /ubus/timer-mfd@10000080/watchdog@1c:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
arch/mips/boot/dts/brcm/bcm63268.dtsi:111.4-35: Warning (ranges_format): /ubus/timer-mfd@10000080:ranges: "ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
Fixes:
|
||
Sergio Paracuellos
|
76ce51798c |
MIPS: ralink: mt7621: avoid to init common ralink reset controller
Commit |
||
Christoph Hellwig
|
3622b86f49 |
dma-mapping: reject GFP_COMP for noncoherent allocations
While not quite as bogus as for the dma-coherent allocations that were fixed earlier, GFP_COMP for these allocations has no benefits for the dma-direct case, and can't be supported at all by dma dma-iommu backend which splits up allocations into smaller orders. Due to an oversight in |
||
|
Christoph Hellwig
|
db91832127 |
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
While not quite as bogus as for the dma-coherent allocations that were fixed earlier, GFP_COMP for these allocations has no benefits for the dma-direct case, and can't be supported at all by dma dma-iommu backend which splits up allocations into smaller orders. Due to an oversight in |
||
Andrew Morton
|
1644d755d0 | Merge branch 'linus' | ||
Wei Fang
|
19e72b064f |
net: fec: check the return value of build_skb()
The build_skb might return a null pointer but there is no check on the
return value in the fec_enet_rx_queue(). So a null pointer dereference
might occur. To avoid this, we check the return value of build_skb. If
the return value is a null pointer, the driver will recycle the page and
update the statistic of ndev. Then jump to rx_processing_done to clear
the status flags of the BD so that the hardware can recycle the BD.
Fixes:
|
||
Tim Huang
|
8660495a9c |
drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0
MES is part of gfxoff and MES suspend and resume are skipped for S0i3. But the mes_self_test call path is still in the amdgpu_device_ip_late_init. it's should also be skipped for s0ix as no hardware re-initialization happened. Besides, mes_self_test will free the BO that triggers a lot of warning messages while in the suspend state. [ 81.656085] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:425 amdgpu_bo_free_kernel+0xfc/0x110 [amdgpu] [ 81.679435] Call Trace: [ 81.679726] <TASK> [ 81.679981] amdgpu_mes_remove_hw_queue+0x17a/0x230 [amdgpu] [ 81.680857] amdgpu_mes_self_test+0x390/0x430 [amdgpu] [ 81.681665] mes_v11_0_late_init+0x37/0x50 [amdgpu] [ 81.682423] amdgpu_device_ip_late_init+0x53/0x280 [amdgpu] [ 81.683257] amdgpu_device_resume+0xae/0x2a0 [amdgpu] [ 81.684043] amdgpu_pmops_resume+0x37/0x70 [amdgpu] [ 81.684818] pci_pm_resume+0x5c/0xa0 [ 81.685247] ? pci_pm_thaw+0x90/0x90 [ 81.685658] dpm_run_callback+0x4e/0x160 [ 81.686110] device_resume+0xad/0x210 [ 81.686529] async_resume+0x1e/0x40 [ 81.686931] async_run_entry_fn+0x33/0x120 [ 81.687405] process_one_work+0x21d/0x3f0 [ 81.687869] worker_thread+0x4a/0x3c0 [ 81.688293] ? process_one_work+0x3f0/0x3f0 [ 81.688777] kthread+0xff/0x130 [ 81.689157] ? kthread_complete_and_exit+0x20/0x20 [ 81.689707] ret_from_fork+0x22/0x30 [ 81.690118] </TASK> [ 81.690380] ---[ end trace 0000000000000000 ]--- v2: make the comment clean and use adev->in_s0ix instead of adev->suspend Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1 |
||
Evan Quan
|
e73fc71e8f |
drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics
For SMU 13.0.0 and 13.0.7, the output from PMFW is in percent. Driver need to convert that into correct PMW(255) based. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1 |
||
|
Evan Quan
|
272b981416 |
drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34
To fit the latest PMFW and suppress the warning emerged on driver loading. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0, 6.1 |
||
|
Namhyung Kim
|
59119c09ae |
perf lock contention: Factor out lock_type_table
Move it out of get_type_str() so that we can reuse the table for others later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Blake Jones <blakejones@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20221219201732.460111-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Yang Jihong
|
8b269b7555 |
perf probe: Check -v and -q options in the right place
Check the -q and -v options first to return earlier on error.
Before:
# perf probe -q -v test
probe-definition(0): test
symbol:test file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Error: -v and -q are exclusive.
After:
# perf probe -q -v test
Error: -v and -q are exclusive.
Fixes:
|
||
|
Yang Jihong
|
7c0a6144f9 |
perf tools: Fix usage of the verbose variable
The data type of the verbose variable is integer and can be negative, replace improperly used cases in a unified manner: 1. if (verbose) => if (verbose > 0) 2. if (!verbose) => if (verbose <= 0) 3. if (XX && verbose) => if (XX && verbose > 0) 4. if (XX && !verbose) => if (XX && verbose <= 0) Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20221220035702.188413-3-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Yang Jihong
|
188ac720d3 |
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option()
When perf uses quiet mode, perf_quiet_option() sets the 'debug_peo_args'
variable to -1, and display_attr() incorrectly determines the value of
'debug_peo_args'. As a result, unexpected information is displayed.
Before:
# perf record --quiet -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 128
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
...
After:
# perf record --quiet -- ls > /dev/null
#
redirect_to_stderr is a similar problem.
Fixes:
|
||
Arnaldo Carvalho de Melo
|
b235e5b51f |
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
|
||
Alex Deucher
|
afa6646b1c |
drm/amdgpu: skip MES for S0ix as well since it's part of GFX
It's also part of gfxoff. Cc: stable@vger.kernel.org # 6.0, 6.1 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
Arnd Bergmann
|
d118b18fb1 |
drm/amd/pm: avoid large variable on kernel stack
The activity_monitor_external[] array is too big to fit on the
kernel stack, resulting in this warning with clang:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_7_ppt.c:1438:12: error: stack frame size (1040) exceeds limit (1024) in 'smu_v13_0_7_get_power_profile_mode' [-Werror,-Wframe-larger-than]
Use dynamic allocation instead. It should also be possible to
have single element here instead of the array, but this seems
easier.
v2: fix up argument to sizeof() (Alex)
Fixes:
|
||
Philip Yang
|
1a799c4c19 |
drm/amdkfd: Fix double release compute pasid
If kfd_process_device_init_vm returns failure after vm is converted to compute vm and vm->pasid set to compute pasid, KFD will not take pdd->drm_file reference. As a result, drm close file handler maybe called to release the compute pasid before KFD process destroy worker to release the same pasid and set vm->pasid to zero, this generates below WARNING backtrace and NULL pointer access. Add helper amdgpu_amdkfd_gpuvm_set_vm_pasid and call it at the last step of kfd_process_device_init_vm, to ensure vm pasid is the original pasid if acquiring vm failed or is the compute pasid with pdd->drm_file reference taken to avoid double release same pasid. amdgpu: Failed to create process VM object ida_free called for id=32770 which is not allocated. WARNING: CPU: 57 PID: 72542 at ../lib/idr.c:522 ida_free+0x96/0x140 RIP: 0010:ida_free+0x96/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:ida_free+0x76/0x140 Call Trace: amdgpu_pasid_free_delayed+0xe1/0x2a0 [amdgpu] amdgpu_driver_postclose_kms+0x2d8/0x340 [amdgpu] drm_file_free.part.13+0x216/0x270 [drm] drm_close_helper.isra.14+0x60/0x70 [drm] drm_release+0x6e/0xf0 [drm] __fput+0xcc/0x280 ____fput+0xe/0x20 task_work_run+0x96/0xc0 do_exit+0x3d0/0xc10 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Philip Yang
|
29d48b87db |
drm/amdkfd: Fix kfd_process_device_init_vm error handling
Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Arnaldo Carvalho de Melo
|
6d5edd15c9 |
tools headers UAPI: Sync powerpc syscall table with the kernel sources
To pick the changes in these csets:
|
||
|
Arnaldo Carvalho de Melo
|
a66558dcb1 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in: |
||
|
Arnaldo Carvalho de Melo
|
eeac18e2bf |
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in: |
||
Alessandro Carminati
|
bfa87ac86c |
rv/monitors: Move monitor structure in rodata
It makes sense to move the important monitor structure into rodata to prevent accidental structure modification. Link: https://lkml.kernel.org/r/20221122173648.4732-1-acarmina@redhat.com Signed-off-by: Alessandro Carminati <acarmina@redhat.com> Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
b6bb9676f2 |
m68knommu: updates and fixes for v6.2
Fixes include: . use strscpy() instead of strncpy() for cmdline setup -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEmsfM6tQwfNjBOxr3TiQVqaG9L4AFAmOg5EsACgkQTiQVqaG9 L4BYbg//VCfF1+mGM0TJkTRGNKr4JuSN7QvD3iwrUCgdFdmPTT87l4mgzwTepQtS mHF8LdRI7re51grG5cNo7Z6RFZC1/SksjSm1no7o6S3c705N5aMYMTTz1rUW/9w3 s9shSjcHA8cKmP0/W5jASSe0fKu3gY28txmTFobZg8PzT5mo6fDlcQTucgf3HOpK 6+zqocNtOXv3iG7Ay2mcP40EmrZyB3EswB6S26BvR3Vzf2yfXCWLhSQAXt9OjfJv IG3Zz2ba94uGRcYd1PWzeYyHUCdYu/YWkvajSg36vUVL56y6HnyTxjAIKkkMb0GM SxRE+Qq13lSSQy2aNTcOvSyTXUX3zzRpkmCA5pKAEB/cYSxuQo9t5PNj4q7tK+cw YURD1ter5h6h60TrN2kFUknOm1XNHrrKHmPLxTX/PZWg/DxDDsbftZkernBnXuct u4mSOpfeG2EEsKQu2V7tVN/MZCIK1uF52v69Zzslf6Xw61jNG98cyHnOk/x+Ci6J v1+y9o7W4r1+3x0XZ7NP1WyNkAhcuTTleHbI995z3ZlvSt3mCOKeIBXA1a15dukq 3atzdvcdEHm4LiCyDlztweKMT2l0YFFp7M8fJRWFanxv5Oyt5aLW0AjQ6eO6ko7z dbUA8uHWa8XrbyKWEMjosYw7RqQrZRdY9l0qv8vvg2SC3xh92nE= =7enN -----END PGP SIGNATURE----- Merge tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu update from Greg Ungerer: "Only a single change to use the safer strscpy() instead of strncpy() when setting up the cmdline" * tag 'm68knommu-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: use strscpy() to instead of strncpy() |
||
|
Linus Torvalds
|
32d528c4b8 |
SPDX/License additions for 6.2-rc1
Here are 2 small updates for LICENSES and some kernel files that add the Copyleft-next license and use it in a SPDX tag as a dual-license for some kernel files. These have been discussed thoroughly in public on the linux-spdx mailing list, and have the needed acks on them, as well as having been in linux-next with no reported issues for quite some time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY6F1Qg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynGWwCfVJ+Z1CVWSFC8KaaGNiFu/gXmgNUAoKy11gWJ 8igpSNEkOiGiaGA+AvN+ =j8iu -----END PGP SIGNATURE----- Merge tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX/License additions from Greg KH: "Here are two small updates for LICENSES and some kernel files that add the Copyleft-next license and use it in a SPDX tag as a dual-license for some kernel files. These have been discussed thoroughly in public on the linux-spdx mailing list, and have the needed acks on them, as well as having been in linux-next with no reported issues for quite some time" * tag 'spdx-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: testing: use the copyleft-next-0.3.1 SPDX tag LICENSES: Add the copyleft-next-0.3.1 license |
||
|
Linus Torvalds
|
3e0caea754 |
Devicetree updates for v6.2, part 2:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node
-----BEGIN PGP SIGNATURE-----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=ZGp/
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"This is mostly a treewide clean-up from Krzysztof. There's also a
couple of fixes and things that fell thru the cracks.
I must say this has been a nice merge window without bindings dumped
in at the last minute introducing warnings.
Summary:
- Treewide dropping of redundant 'binding' or 'schema' from schema
titles. This will be followed up with a automated check to catch
these.
- Re-sort vendor-prefies
- Convert GPIO based watchdog to schema
- Handle all the variations for clocks, resets, power domains in i.MX
PCIe binding
- Document missing 'power-domains' property in mxsfb
- Fix error with path references in Tegra XUSB example
- Honor CONFIG_CMDLINE* even without /chosen node"
* tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: drop redundant part of title (manual)
dt-bindings: clock: drop redundant part of title
dt-bindings: drop redundant part of title (beginning)
dt-bindings: drop redundant part of title (end, part three)
dt-bindings: drop redundant part of title (end, part two)
dt-bindings: drop redundant part of title (end)
dt-bindings: clock: st,stm32mp1-rcc: add proper title
dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title
dt-bindings: drop redundant part of title of shared bindings
dt-bindings: watchdog: gpio: Convert bindings to YAML
dt-bindings: imx6q-pcie: Handle more resets on legacy platforms
dt-bindings: imx6q-pcie: Handle various PD configurations
dt-bindings: imx6q-pcie: Handle various clock configurations
dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers
dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property
dt-bindings: vendor-prefixes: sort entries alphabetically
dt-bindings: usb: tegra-xusb: Remove path references
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node
|
||
|
Linus Torvalds
|
35f79d0e2c |
parisc architecture fixes for kernel v6.2-rc1:
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY6B/cgAKCRD3ErUQojoP
X85pAQCC6YpSYON3KZRfABeiDTRCKcGm72p7JQRnyj88XCq6ZAEA40T2qpRpjoYi
NaXr28mxHFYh4Z0c5Y7K5EuFTT7gAA4=
=e2Jd
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"There is one noteable patch, which allows the parisc kernel to use the
same MADV_xxx constants as the other architectures going forward. With
that change only alpha has one entry left (MADV_DONTNEED is 6 vs 4 on
others) which is different. To prevent an ABI breakage, a wrapper is
included which translates old MADV values to the new ones, so existing
userspace isn't affected. Reason for that patch is, that some
applications wrongly used the standard MADV_xxx values even on some
non-x86 platforms and as such those programs failed to run correctly
on parisc (examples are qemu-user, tor browser and boringssl).
Then the kgdb console and the LED code received some fixes, and some
0-day warnings are now gone. Finally, the very last compile warning
which was visible during a kernel build is now fixed too (in the vDSO
code).
The majority of the patches are tagged for stable series and in
summary this patchset is quite small and drops more code than it adds:
Fixes:
- Fix potential null-ptr-deref in start_task()
- Fix kgdb console on serial port
- Add missing FORCE prerequisites in Makefile
- Drop PMD_SHIFT from calculation in pgtable.h
Enhancements:
- Implement a wrapper to align madvise() MADV_* constants with other
architectures
- If machine supports running MPE/XL, show the MPE model string
Cleanups:
- Drop duplicate kgdb console code
- Indenting fixes in setup_cmdline()"
* tag 'parisc-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Show MPE/iX model string at bootup
parisc: Add missing FORCE prerequisites in Makefile
parisc: Move pdc_result struct to firmware.c
parisc: Drop locking in pdc console code
parisc: Drop duplicate kgdb_pdc console
parisc: Fix locking in pdc_iodc_print() firmware call
parisc: Drop PMD_SHIFT from calculation in pgtable.h
parisc: Align parisc MADV_XXX constants with all other architectures
parisc: led: Fix potential null-ptr-deref in start_task()
parisc: Fix inconsistent indenting in setup_cmdline()
|
||
José Expósito
|
54f27dc53f |
HID: sony: Fix unused function warning
Compiling this driver without setting "CONFIG_SONY_FF" generates the following warning: drivers/hid/hid-sony.c:2358:20: warning: unused function 'sony_send_output_report' [-Wunused-function] static inline void sony_send_output_report(struct sony_sc *sc) ^ 1 warning generated. Add the missing preprocessor check to fix it. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Terry Junge
|
3d57f36c89 |
HID: plantronics: Additional PIDs for double volume key presses quirk
I no longer work for Plantronics (aka Poly, aka HP) and do not have access to the headsets in order to test. However, as noted by Maxim, the other 32xx models that share the same base code set as the 3220 would need the same quirk. This patch adds the PIDs for the rest of the Blackwire 32XX product family that require the quirk. Plantronics Blackwire 3210 Series (047f:c055) Plantronics Blackwire 3215 Series (047f:c057) Plantronics Blackwire 3225 Series (047f:c058) Quote from previous patch by Maxim Mikityanskiy Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. End quote Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
|
José Expósito
|
4eab1c2fe0 |
HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit
|
||
|
José Expósito
|
cec827d658 |
HID: Ignore HP Envy x360 eu0009nv stylus battery
Battery status is reported for the HP Envy x360 eu0009nv stylus even though it does not have battery. Prevent it from always reporting the battery as low (1%). Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823 Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |