Commit Graph

852 Commits

Author SHA1 Message Date
Clemens Ladisch
b1ce7ba619 ALSA: usb-audio: claim autodetected PCM interfaces all at once
snd_card_register() registers all devices newly added since the last
call.  However, the playback/capture streams are handled as one ALSA
device, so the second /dev device will not be registered if the PCM
streams are added in two steps.

QUIRK_AUTODETECT caused the probe callback to be called once for each
interface, which triggered this problem.  Work around this by handling
this like the composite quirk, i.e., autodetecting all other interfaces
that might be used for PCM or MIDI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:49 +02:00
Clemens Ladisch
8e5ced83dd ALSA: usb-audio: remove superfluous Roland quirks
Remove all quirks that are no longer needed now that the generic Roland
quirks can handle the vendor-specific descriptors correctly.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:49 +02:00
Clemens Ladisch
a968782e27 ALSA: usb-audio: add MIDI port names for some Roland devices
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:48 +02:00
Clemens Ladisch
aafe77cc45 ALSA: usb-audio: add support for many Roland/Yamaha devices
Add quirks to detect the various vendor-specific descriptors used by
Roland and Yamaha in most of their recent USB audio and MIDI devices.

Together with the previous patch, this should add audio/MIDI support for
the following USB devices:
- Edirol motion dive .tokyo performance package
- Roland MC-808 Synthesizer
- Roland BK-7m Synthesizer
- Roland VIMA JM-5/8 Synthesizer
- Roland SP-555 Sequencer
- Roland V-Synth GT Synthesizer
- Roland Music Atelier AT-75/100/300/350C/500/800/900/900C Organ
- Edirol V-Mixer M-200i/300/380/400/480/R-1000
- BOSS GT-10B Effects Processor
- Roland Fantom G6/G7/G8 Keyboard
- Cakewalk Sonar V-Studio 20/100/700 Audio Interface
- Roland GW-8 Keyboard
- Roland AX-Synth Keyboard
- Roland JUNO-Di/STAGE/Gi Keyboard
- Roland VB-99 Effects Processor
- Cakewalk UM-2G MIDI Interface
- Roland A-500S Keyboard
- Roland SD-50 Synthesizer
- Roland OCTAPAD SPD-30 Controller
- Roland Lucina AX-09 Synthesizer
- BOSS BR-800 Digital Recorder
- Roland DUO/TRI-CAPTURE (EX) Audio Interface
- BOSS RC-300 Loop Station
- Roland JUPITER-50/80 Keyboard
- Roland R-26 Recorder
- Roland SPD-SX Controller
- BOSS JS-10 Audio Player
- Roland TD-11/15/30 Drum Module
- Roland A-49/88 Keyboard
- Roland INTEGRA-7 Synthesizer
- Roland R-88 Recorder

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:48 +02:00
Clemens Ladisch
ba7c2be114 ALSA: usb-audio: detect implicit feedback on Roland devices
All the Roland/Edirol/BOSS USB audio devices that need implicit feedback
show this unambiguously in their descriptors, so it might be a good idea
to let the driver detect this.

This should make playback work correctly (at least with Jack) with the
following devices:
- BOSS GT-100
- BOSS JS-8 Jam Station
- Edirol M-16DX
- Roland GAIA SH-01

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:47 +02:00
Clemens Ladisch
8f898e92ae ALSA: usb-audio: store protocol version in struct audioformat
Instead of reading bInterfaceProtocol from the descriptor whenever it's
needed, store this value in the audioformat structure.  Besides
simplifying some code, this will allow us to correctly handle vendor-
specific devices where the descriptors are marked with other values.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2013-06-27 21:59:47 +02:00
Antonio Ospite
a91c3fb2f8 Add M2Tech hiFace USB-SPDIF driver
Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.

M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output
Interface, see http://www.m2tech.biz/hiface.html

The supported products are:

  * M2Tech Young
  * M2Tech hiFace
  * M2Tech North Star
  * M2Tech W4S Young
  * M2Tech Corrson
  * M2Tech AUDIA
  * M2Tech SL Audio
  * M2Tech Empirical
  * M2Tech Rockna
  * M2Tech Pathos
  * M2Tech Metronome
  * M2Tech CAD
  * M2Tech Audio Esclusive
  * M2Tech Rotel
  * M2Tech Eeaudio
  * The Chord Company CHORD
  * AVA Group A/S Vitus

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-24 09:26:08 +02:00
Antonio Ospite
0af49ffe3c ALSA: usb: uniform style used in MODULE_SUPPORTED_DEVICE()
In sound/usb/card.c and sound/usb/misc/ua101.c there are no spaces
between the vendor and the device names, use this style in the other
drivers too.

This also helps keeping consistency when new drivers copies from the
ones already in the mainline tree.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:37:08 +02:00
Antonio Ospite
4a9f911861 ALSA: snd-usb-6fire: use vmalloc buffers
For USB devices it's not necessary to allocate physically contiguous
buffers.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:36:41 +02:00
Antonio Ospite
fc76f86376 ALSA: snd-usb-caiaq: use vmalloc buffers
For USB devices it's not necessary to allocate physically contiguous
buffers.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:35:52 +02:00
Antonio Ospite
3dd446a7e5 ALSA: snd-usb-caiaq: remove the unused snd_card_used variable
The snd_card_used variable is only read but never written, remove it.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-21 14:33:05 +02:00
Dave Jones
cd1199edc7 ALSA: sound/usb/misc/ua101.c: convert __list_for_each usage to list_for_each
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-18 07:47:32 +02:00
Dan Carpenter
da177dd025 ALSA: usx2y: remove some old dead code
USB_QUEUE_BULK isn't defined any more.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 10:45:42 +02:00
Takashi Iwai
36691e1be6 ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam c310
Just like the previous fix for LogitechHD Webcam c270 in commit
11e7064f35, c310 model also requires the
same workaround for avoiding the kernel warning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 10:25:02 +02:00
Clemens Ladisch
342cda2934 ALSA: usb-audio: work around Android accessory firmware bug
When the Android firmware enables the audio interfaces in accessory
mode, it always declares in the control interface's baInterfaceNr array
that interfaces 0 and 1 belong to the audio function.  However, the
accessory interface itself, if also enabled, already is at index 0 and
shifts the actual audio interface numbers to 1 and 2, which prevents the
PCM streaming interface from being seen by the host driver.

To get the PCM interface interface to work, detect when the descriptors
point to the (for this driver useless) accessory interface, and redirect
to the correct one.

Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Tested-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-17 09:56:52 +02:00
Takashi Iwai
11e7064f35 ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270
USB audio driver spews an error message when probing Logitech HD
webcam c270:
  ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
  ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1

Obviously the device needs a fixed volume resolution (cval->res = 384)
like other Logitech devices.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735

Reported-and-tested-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-05 08:35:26 +02:00
Takashi Iwai
8eafc0a161 ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-04 16:07:48 +02:00
Clemens Ladisch
a0c6d309c6 ALSA: usb-audio: fix Roland/Cakewalk UM-3G support
Commit 927c9423dd (ALSA: usb-audio: add
Edirol UM-3G support) used a wrong quirk type, which would make the
driver refuse to attach with the error message "MIDIStreaming interface
descriptor not found".

Cc: <stable@vger.kernel.org> # 3.3 and later
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-03 09:42:21 +02:00
Torsten Schenk
d47333ddb2 ALSA: usb-6fire: Modify firmware version check
Check only the uppermost 16 bits instead of the whole 32 bits of
the version information. Do this because all firmware version tested
with this version information worked correctly and the strict check
causes problems for several users.

Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-23 14:30:26 +02:00
Torstein Hegge
e6135fe960 ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format
freqshift is only set for the data endpoint and syncmaxsize is only set
for the sync endpoint. This results in a syncmaxsize of zero used in the
proc output feedback format calculation, which gives a feedback format
incorrectly shown as 8.16 for UAC2 devices.

As neither the data nor the sync endpoint gives all the relevant
content, output the two combined.

Also remove the sync_endpoint "packet size" which is always zero
and the sync_endpoint "momentary freq" which is constant.

Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async.

Reported-by: B. Zhang <bb.zhang@free.fr>
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-17 08:05:34 +02:00
Eldad Zack
4ca231b2e6 ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
Current code does this:

  be16_to_cpu(buf[i * 2] << 8 | buf[(i * 2) + 1])

Which is effectively (neglecting the index):

  be16_to_cpu(be16_to_cpu(*((u16 *) buf)))

This means the int16 in the buffer is not converted at all.

Daniel Mack confirmed that the driver works on little endian
CPUs, leading to the conclusion that the device-side structure
is actually little endian.
This changes the code to use le16_to_cpu().

Caught by sparse.

Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-30 09:19:02 +02:00
Eldad Zack
74c34ca1cc ALSA: pcm_format_to_bits strong-typed conversion
Add a function to handle conversion from snd_pcm_format_t
to bitwise with proper typing.

Change such conversions to use this function and silence sparse
warnings.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 13:36:15 +02:00
Clemens Ladisch
c75c5ab575 ALSA: USB: adjust for changed 3.8 USB API
The recent changes in the USB API ("implement new semantics for
URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the
default, and changed this flag to mean that URBs can be delayed.
This is not the behaviour wanted by any of the audio drivers because
it leads to discontinuous playback with very small period sizes.
Therefore, our URBs need to be submitted without this flag.

Reported-by: Joe Rayhawk <jrayhawk@fairlystable.org>
Cc: <stable@vger.kernel.org> # 3.8 only
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 10:57:35 +02:00
David Henningsson
fa92dd77ec ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources
The Scarlett 2i2 seems to take almost 500 ms to set the sample rate,
even if the clock is currently set to that value. This patch speeds
up prepare of the device, by avoiding setting the clock to something
it already is.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-26 07:37:09 +02:00
Trulan Martin
03e0221444 ALSA: usb-audio: USB quirk for Yamaha THR10C
This patch adds a USB quirk for the Yamaha THR10C amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-25 07:48:21 +02:00
Trulan Martin
1b15362c74 ALSA: usb-audio: USB quirk for Yamaha THR5A
This patch adds a USB quirk for the Yamaha THR5A amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-25 07:48:02 +02:00
Trulan Martin
ae3f0c267f ALSA: usb-audio: USB quirk for Yamaha THR10
This patch adds a USB quirk for the Yamaha THR10 amp.

Signed-off-by: Trulan Martin <trulanm@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-25 07:47:50 +02:00
Takashi Iwai
60af3d037e ALSA: usb-audio: Fix autopm error during probing
We've got strange errors in get_ctl_value() in mixer.c during
probing, e.g. on Hercules RMX2 DJ Controller:

  ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4
  ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4
  ....

It turned out that the culprit is autopm: snd_usb_autoresume() returns
-ENODEV when called during card->probing = 1.

Since the call itself during card->probing = 1 is valid, let's fix the
return value of snd_usb_autoresume() as success.

Reported-and-tested-by: Daniel Schürmann <daschuer@mixxx.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-25 07:46:51 +02:00
Daniel Mack
ebfc594c02 ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT
The USB_DT_CS_ENDPOINT class-specific endpoint descriptor is usually
stuffed directly after the standard USB endpoint descriptor, and this is
where the driver currently expects it to be.

There are, however, devices in the wild that have it the other way
around in their descriptor sets, so the USB_DT_CS_ENDPOINT comes
*before* the standard enpoint. Devices known to implement it that way
are "Sennheiser BTD-500" and Plantronics USB headsets.

When the driver can't find the USB_DT_CS_ENDPOINT, it won't be able to
change sample rates, as the bitmask for the validity of this command is
storen in bmAttributes of that descriptor.

Fix this by searching the entire interface instead of just the extra
bytes of the first endpoint, in case the latter fails.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Torstein Hegge <hegge@resisty.net>
Reported-and-tested-by: Yves G <alsa-user@vivigatt.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-25 07:33:20 +02:00
Daniel Schürmann
b5f035dbca ALSA: snd-usb-audio: set the timeout for usb control set messages to 5000 ms
Set the timeout for USB control set messages according to the USB 2
spec, using the macros from include/linux/usb.h.
The get timout becomes 5000 ms even though it is 500 ms in the
spec. This patch is required to run the Hercules RMX2 which needs a
timeout of 1240 ms.

More notes from author:
I still distinguish between set and get but as long both are 5000 ms
GCC will remove it anyway. IMHO this is more easy read and there is no
need to explain why we use a get timeout for set messages.

Signed-off-by: Daniel Schürmann <daschuer@mixxx.org>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-22 10:45:02 +02:00
Takashi Iwai
8dd2b66d1a ASoC: More updates for v3.10
The main additional change here is Lars-Peter's DMA work plus the
 platform conversions which have been tested - getting this in mainline
 will make life easier for development after the merge window.  These
 factor a large chunk of code out of the drivers for the platforms using
 dmaengine, greatly simplifying development.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRb/60AAoJELSic+t+oim9vL8P+wfaXRBGDtxhzMnTCf/cR2sc
 vlRnmSjA4s14vCoPffQJI0zaGLwDT5FnQtg6DAkP/8vXRoUz4Hgb0UwwDPiQNGED
 6Wmqm7mU+XGWgo4bPBA1e3Bt/9phVVO62rNPMNEnNqcp/Fa3RrdFAfxy4EUz9sKa
 lX4KJETCbIvLpOJmgq3H/WGtgYEnULHSCCNUQQ+fEY/VRQLsMtY5+tnZIJilMez0
 Ff6B084kE5oQpMsxdf89q8O5Uqc8lB0Xleluh0yQ1YZK3lxELMgr1Z7BkitysaJh
 uid+Ze8Vj2n5duI87OZcHN1Z2SibgTzqUwsd6YGCUKK3D3KVcSYgaYNn3zY09KNG
 tYlckAOJgVXqe1jedsfyuKTraz2JBY+jWYcIf8cRbwxxZpItG4Oj3idIBAKw+FrE
 /0DGqW7U9wXKx8pg7BH3dE6J6WVZ5uryaQX9d+nC8CGGjpcCla5L5jl/8stgGniW
 StTk4ETB6PP6iApv11p/7CXaTqXi+9UHmlcHFo11oQKiJFx4kG21DKQCXS0ycocM
 j0/gRGesWrVawYwJ86dhciUJjWlTHwproE/75i1JsTd3eRX6ybjBeNTTAI2ll/BJ
 BFDTS7tbX7GVcNbwXCvxW6pKOPpqV9jh0yMgpaB4jtkXOTKV/Z73ThPEql5w27c5
 OTBtONmiYeBcZGvgKQ3r
 =MXrq
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.10

The main additional change here is Lars-Peter's DMA work plus the
platform conversions which have been tested - getting this in mainline
will make life easier for development after the merge window.  These
factor a large chunk of code out of the drivers for the platforms using
dmaengine, greatly simplifying development.
2013-04-18 16:24:31 +02:00
Daniel Mack
126825e7ea ALSA: snd-usb: add quirks handler for DSD streams
Unfortunately, none of the UAC standards provides a way to identify DSD
(Direct Stream Digital) formats. Hence, this patch adds a quirks
handler to identify USB interfaces that are capable of handling DSD.

That quirks handler can augment the already parsed formats bit-field,
by any of the new SNDRV_PCM_FMTBIT_DSD_{U8_U16} and setting the dsd_dop
flag in the audio format, if the driver should take care for the DOP
byte stuffing.

The only devices that are known to work with this are the ones with
a 'Playback Designs' vendor id.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-18 10:03:53 +02:00
Daniel Mack
44dcbbb1cd ALSA: snd-usb: add support for bit-reversed byte formats
There is quite some confusion around the bit-ordering in DSD samples,
and no general agreement that defines whether hardware is supposed to
expect the oldest sample in the MSB or the LSB of a byte.

ALSA will hence set the rule that on the software API layer, bytes
always carry the oldest bit in the most significant bit of a byte, and
the driver has to translate that at runtime in order to match the
hardware layout.

This patch adds support for this by adding a boolean flag to the
audio format struct.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-18 10:03:47 +02:00
Daniel Mack
d24f5061ee ALSA: snd-usb: add support for DSD DOP stream transport
In order to provide a compatibility way for pushing DSD
samples through ordinary PCM channels, the "DoP open Standard" was
invented. See http://www.dsd-guide.com for the official document.

The host is required to stuff DSD marker bytes (0x05, 0xfa,
alternating) in the MSB of 24 bit wide samples on the bus, in addition
to the 16 bits of actual DSD sample payload.

To support this, the hardware and software stride logic in the driver
has to be tweaked a bit, as we make the userspace believe we're
operating on 16 bit samples, while we in fact push one more byte per
channel down to the hardware.

The DOP runtime information is stored in struct snd_usb_substream, so
we can keep track of our state across multiple calls to
prepare_playback_urb_dsd_dop().

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-18 10:03:32 +02:00
Daniel Mack
8a2a74d2b7 ALSA: snd-usb: use ep->stride from urb callbacks
For normal PCM transfer, this change has no effect, as the endpoint's
stride is always frame_bits/8. For DSD DOP streams, however, which is
added later, the hardware stride differs from the software stride, and
the endpoint has the correct information in these cases.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-18 10:03:23 +02:00
Clemens Ladisch
cbc200bca4 ALSA: usb-audio: disable autopm for MIDI devices
Commit 88a8516a21 (ALSA: usbaudio: implement USB autosuspend)
introduced autopm for all USB audio/MIDI devices.  However, many MIDI
devices, such as synthesizers, do not merely transmit MIDI messages but
use their MIDI inputs to control other functions.  With autopm, these
devices would get powered down as soon as the last MIDI port device is
closed on the host.

Even some plain MIDI interfaces could get broken: they automatically
send Active Sensing messages while powered up, but as soon as these
messages cease, the receiving device would interpret this as an
accidental disconnection.

Commit f5f165418c (ALSA: usb-audio: Fix missing autopm for MIDI input)
introduced another regression: some devices (e.g. the Roland GAIA SH-01)
are self-powered but do a reset whenever the USB interface's power state
changes.

To work around all this, just disable autopm for all USB MIDI devices.

Reported-by: Laurens Holst
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-15 16:03:57 +02:00
Calvin Owens
1539d4f82a ALSA: usb: Add quirk for 192KHz recording on E-Mu devices
When recording at 176.2KHz or 192Khz, the device adds a 32-bit length
header to the capture packets, which obviously needs to be ignored for
recording to work properly.

Userspace expected:  L0 L1 L2 R0 R1 R2
...but actually got: R2 L0 L1 L2 R0 R1

Also, the last byte of the length header being interpreted as L0 of
the first sample caused spikes every 0.5ms, resulting in a loud 16KHz
tone (about the highest 'B' on a piano) being present throughout
captures.

Tested at all sample rates on an E-Mu 0404USB, and tested for
regressions on a generic USB headset.

Signed-off-by: Calvin Owens <jcalvinowens@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-13 10:58:03 +02:00
Daniel Mack
21bb5aafce ALSA: snd-usb: Playback Design: use usb_set_inferface quirk from more locations
It turns out the devices from Playback Design need the delay quirk
after usb_set_interface from clocks.c as well. Make it a proper
quirks function and factor out the code to quirks.c.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-10 09:21:43 +02:00
Eldad Zack
889d66848b ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
The usb_control_msg() function expects __u16 types and performs
the endianness conversions by itself.
However, in three places, a conversion is performed before it is
handed over to usb_control_msg(), which leads to a double conversion
(= no conversion):
* snd_usb_nativeinstruments_boot_quirk()
* snd_nativeinstruments_control_get()
* snd_nativeinstruments_control_put()

Caught by sparse:

sound/usb/mixer_quirks.c:512:38: warning: incorrect type in argument 6 (different base types)
sound/usb/mixer_quirks.c:512:38:    expected unsigned short [unsigned] [usertype] index
sound/usb/mixer_quirks.c:512:38:    got restricted __le16 [usertype] <noident>
sound/usb/mixer_quirks.c:543:35: warning: incorrect type in argument 5 (different base types)
sound/usb/mixer_quirks.c:543:35:    expected unsigned short [unsigned] [usertype] value
sound/usb/mixer_quirks.c:543:35:    got restricted __le16 [usertype] <noident>
sound/usb/mixer_quirks.c:543:56: warning: incorrect type in argument 6 (different base types)
sound/usb/mixer_quirks.c:543:56:    expected unsigned short [unsigned] [usertype] index
sound/usb/mixer_quirks.c:543:56:    got restricted __le16 [usertype] <noident>
sound/usb/quirks.c:502:35: warning: incorrect type in argument 5 (different base types)
sound/usb/quirks.c:502:35:    expected unsigned short [unsigned] [usertype] value
sound/usb/quirks.c:502:35:    got restricted __le16 [usertype] <noident>

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-07 09:44:08 +02:00
Eldad Zack
1dc669fed6 ALSA: usb-audio: UAC2: support read-only freq control
Some clocks might be read-only, e.g., external clocks (see also
UAC2 4.7.2.1).

In this case, setting the sample frequency will always fail
(even if the rate is equal to the current clock rate),
therefore do not write, but read the value and compare to the
requested rate.
If the clock is read only, avoid reading it twice.

If it doesn't match, return -ENXIO since the clock is invalid for
this configuration.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:32:07 +02:00
Eldad Zack
027bbc1546 ALSA: usb-audio: show err in set_sample_rate_v2 debug
Show the error code returned from the USB subsystem in
the debug messages.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:31:40 +02:00
Eldad Zack
ef02e29b01 ALSA: usb-audio: UAC2: auto clock selection module param
Add a module param to disable auto clock selection.
This is provided for users that expect the audio stream to
fail when the clock source is invalid (e.g., the word clock
was unintentionally disconnected).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:31:32 +02:00
Eldad Zack
8c55af3f69 ALSA: usb-audio: UAC2: try to find and switch to valid clock
If a selector is available on a device, it may be pointing to a
clock source which is currently invalid.
If there is a valid clock source which can be selected, switch
to it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:31:14 +02:00
Eldad Zack
06ffc1ebdd ALSA: usb-audio: UAC2: do clock validity check earlier
Move the check that parse_audio_format_rates_v2() do after
receiving the clock source entity ID directly into the find
function and add a validation flag to the function.

This patch does not introduce any logic flow change.

It is provided to allow introducing automatic clock switching
easier later. By moving this uac_clock_source_is_valid callsite,
2 additional callsites can be avoided.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:59 +02:00
Eldad Zack
f6a8bc70f8 ALSA: usb-audio: use endianness macros
Replace the endianness conversions with the kernel-wide swabbing macros
in get/set_sample_rate_v2.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:49 +02:00
Eldad Zack
98ae472b57 ALSA: usb-audio: spelling correction
Correct spelling of snd_usb_endpoint_implict_feedback_sink in all
occurances.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:30 +02:00
Eldad Zack
ed136aca77 ALSA: usb-audio: neaten EXPORT_SYMBOLS placement
Put EXPORT_SYMBOLS directly under the exported function.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:24 +02:00
Eldad Zack
f9d3543591 ALSA: usb-audio: neaten MODULE_DEVICE_TABLE placement
Minor style fix, following a general code style in the kernel.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:18 +02:00
Eldad Zack
88766f04c4 ALSA: usb-audio: convert list_for_each to entry variant
Change occurances of list_for_each into list_for_each_entry where
applicable.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:06 +02:00
Takashi Iwai
7c51746517 ALSA: usb-audio: Clean up the code in set_sample_rate_v2()
Just for cleaning up, introduce a new function get_sample_rate_v2()
for replacing two identical calls in set_sample_rate_v2().

No functional change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-03 19:08:29 +02:00
Takashi Iwai
efc33ce197 Merge branch 'for-linus' into for-next
Back-merge for cleaning up usb-audio code the recent commit modified,
and further UAC2 autoclock patches.
2013-04-03 17:07:29 +02:00
Torstein Hegge
690a863ff0 ALSA: usb: Work around CM6631 sample rate change bug
The C-Media CM6631 USB receiver doesn't respond to changes in sample rate
while the interface is active. The same behavior is observed in other UAC2
hardware like the VIA VT1731.

Reset the interface after setting the sampling frequency on sample rate
changes, to ensure that the sample rate set by snd_usb_init_sample_rate() is
used. Otherwise, the device will try to use the sample rate of the previous
stream, causing distorted sound on sample rate changes.

The reset is performed for all UAC2 devices, as it should not affect a
standards compliant device, but it is only necessary for C-Media CM6631,
VIA VT1731 and possibly others.

Failure to read sample rate from the device is not handled as an error in
set_sample_rate_v2(), as (permanent or intermittent) failure to read sample
rate isn't essential for a successful sample rate set.

Signed-off-by: Torstein Hegge <hegge@resisty.net>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-03 17:05:44 +02:00
Takashi Iwai
10d7410790 Merge branch 'for-linus' into for-next
Merge back for-linus branch for the badness table adjustment for VIA codecs

* for-linus:
  ALSA: hda - Fix DAC assignment for independent HP
  ALSA: hda - Fix abuse of snd_hda_lock_devices() for DSP loader
  ALSA: hda - Fix typo in checking IEC958 emphasis bit
  ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()
  ALSA: snd-usb: mixer: propagate errors up the call chain
  ALSA: usb: Parse UAC2 extension unit like for UAC1
  ALSA: hda - Fix yet missing GPIO/EAPD setup in cirrus driver
2013-03-22 14:53:25 +01:00
Daniel Mack
83ea5d18d7 ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()
Creation of individual mixer controls may fail, but that shouldn't cause
the entire mixer creation to fail. Even worse, if the mixer creation
fails, that will error out the entire device probing.

All the functions called by parse_audio_unit() should return -EINVAL if
they find descriptors that are unsupported or believed to be malformed,
so we can safely handle this error code as a non-fatal condition in
snd_usb_mixer_controls().

That fixes a long standing bug which is commonly worked around by
adding quirks which make the driver ignore entire interfaces. Some of
them might now be unnecessary.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20 08:43:00 +01:00
Daniel Mack
4d7b86c98e ALSA: snd-usb: mixer: propagate errors up the call chain
In check_input_term() and parse_audio_feature_unit(), propagate the
error value that has been returned by a failing function instead of
-EINVAL. That helps cleaning up the error pathes in the mixer.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20 08:42:35 +01:00
Torstein Hegge
61ac51301e ALSA: usb: Parse UAC2 extension unit like for UAC1
UAC2_EXTENSION_UNIT_V2 differs from UAC1_EXTENSION_UNIT, but can be handled in
the same way when parsing the unit. Otherwise parse_audio_unit() fails when it
sees an extension unit on a UAC2 device.

UAC2_EXTENSION_UNIT_V2 is outside the range allocated by UAC1.

Signed-off-by: Torstein Hegge <hegge@resisty.net>
Acked-by: Daniel Mack <zonque@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20 08:42:12 +01:00
Takashi Iwai
cf30f46acd Merge branch 'for-linus' into for-next
Back-merged for refactoring beep stuff.
2013-03-18 11:04:42 +01:00
Daniel Mack
0959f22ee6 ALSA: snd-usb: add delay quirk for "Playback Design" products
"Playback Design" products need a 50ms delay after setting the USB
interface.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18 08:47:21 +01:00
Daniel Mack
717bfb5f46 ALSA: snd-usb: handle raw data format of UAC2 devices
UAC2 compliant audio devices may announce the capability to transport
raw audio data on their endpoints. Catch this and handle it as
'special' stream on the ALSA side.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18 08:47:13 +01:00
Daniel Mack
2fcdb06d49 ALSA: snd-usb: handle the bmFormats field as unsigned int
This field may use up to 32 bits, so it should be handled as unsigned
int.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18 08:47:04 +01:00
Mark Hills
59ea586f54 ALSA: usb-audio: Trust fields given in the quirk
The maxpacksize field is given in some quirks, but it gets ignored (in
favour of wMaxPacketSize from the first endpoint.) This patch favours
the one in the quirk.

Digidesign Mbox and Mbox 2 are the only affected quirks and the devices
are assumed to be working without this patch. So for safety against the
values in the quirk being incorrect, remove them.

The datainterval is also ignored but there are not currently any quirks
which choose to override this.

Cc: Damien Zammit <damien@zamaudio.com>
Cc: Chris J Arges <christopherarges@gmail.com>
Signed-off-by: Mark Hills <mark@xwax.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18 08:46:37 +01:00
Mark Hills
5e212332cc ALSA: usb-audio: Playback and MIDI support for Novation Twitch DJ controller
The hardware also has a PCM capture device which is not implemented in
this patch.

It may be possible to generalise this to Saffire 6 USB support and some
of the other Focusrite interfaces, but as I don't have access to these
devices we should wait until capture support is working first.

Capture support is not implemented because the code assumes the endpoint
to have its own interface (instead, it shares the interface with playback)
and some thought will be needed to lift this limitation.

Signed-off-by: Mark Hills <mark@xwax.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18 08:46:18 +01:00
Clemens Ladisch
281a6ac0f5 ALSA: usb-audio: add a workaround for the NuForce UDH-100
The NuForce UDH-100 numbers its interfaces incorrectly, which makes the
interface associations come out wrong, which results in the driver
erroring out with the message "Audio class v2 interfaces need an
interface association".

Work around this by searching for the interface association descriptor
also in some other place where it might have ended up.

Reported-and-tested-by: Dave Helstroom <helstroom@google.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12 08:35:30 +01:00
Daniel Mack
2dad940219 ALSA: snd-usb-caiaq: fix smatch warnings
Fix three smatch warnings recently introduced:

sound/usb/caiaq/device.c:166 usb_ep1_command_reply_dispatch() warn:
  variable dereferenced before check 'cdev' (see line 163)
sound/usb/caiaq/device.c:517 snd_disconnect() warn: variable
  dereferenced before check 'card' (see line 514)
sound/usb/caiaq/input.c:510 snd_usb_caiaq_ep4_reply_dispatch() warn:
  variable dereferenced before check 'cdev' (see line 506)

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:24:12 +01:00
Daniel Mack
f1f6b8f65f ALSA: snd-usb-caiaq: switch to dev_*() logging
Get rid of the proprietary functions log() and debug() and use the
generic dev_*() approach. A macro is needed to cast a cdev to a struct
device *.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-04 09:57:26 +01:00
Daniel Mack
1c8470ce31 ALSA: snd-usb-caiaq: rename 'dev' to 'cdev'
This is needed in order to make the device namespace cleaner, and will
help when moving this driver over to dev_*() logging.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-04 09:57:17 +01:00
Jiri Slaby
4909a0caab ALSA: usb/quirks, fix out-of-bounds access
bootresponse in snd_usb_mbox2_boot_quirk is only 12 (decimal) u8's
long, but i9s passed to snd_usb_ctl_msg as it would be 0x12 (hexa)
long. Fix that by having proper size of the array, i.e. 0x12.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-17 18:02:00 +01:00
Matt Gruskin
e9a25e04b8 ALSA: usb-audio: add support for M-Audio FT C600
Adds quirks and mixer support for the M-Audio Fast Track C600 USB
audio interface. This device is very similar to the C400 - the C600
simply has some more inputs and outputs, so the existing C400 support
is extended to support this device as well.

Signed-off-by: Matt Gruskin <matthew.gruskin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11 14:02:27 +01:00
Takashi Iwai
2faea5274f Merge branch 'for-linus' into for-next
Merge pending fixes that haven't pulled into 3.8.
2013-02-05 14:48:03 +01:00
Takashi Iwai
8058e14259 Merge branch 'usb-audio-fix' of git://git.alsa-project.org/alsa-kprivate into for-linus 2013-02-01 07:22:47 +01:00
Clemens Ladisch
7da5804648 ALSA: usb-audio: fix Roland A-PRO support
The quirk for the Roland/Cakewalk A-PRO keyboards accidentally used the
wrong interface number, which prevented the driver from attaching to the
device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.37+ <stable@vger.kernel.org>
2013-01-31 21:21:59 +01:00
Antonio Ospite
aa53f98674 ALSA: usb: cosmetics, remove a leading space
Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-29 15:11:13 +01:00
Antonio Ospite
febd1cc438 ALSA: caiaq: fix use of MODULE_SUPPORTED_DEVICES()
It looks like MODULE_SUPPORTED_DEVICES() is not implemented yet, but
still, having the entries in the list consistently separated by commas
and with balanced parenthesis won't hurt.

Signed-off-by: Antonio Ospite <ao2@amarulasolutions.com>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-29 15:10:57 +01:00
Clemens Ladisch
d56268fb10 ALSA: usb-audio: fix invalid length check for RME and other UAC 2 devices
Commit 23caaf19b1 (ALSA: usb-mixer: Add support for Audio Class v2.0)
forgot to adjust the length check for UAC 2.0 feature unit descriptors.
This would make the code abort on encountering a feature unit without
per-channel controls, and thus prevented the driver to work with any
device having such a unit, such as the RME Babyface or Fireface UCX.

Reported-by: Florian Hanisch <fhanisch@uni-potsdam.de>
Tested-by: Matthew Robbetts <wingfeathera@gmail.com>
Tested-by: Michael Beer <beerml@sigma6audio.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: 2.6.35+ <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-27 10:22:56 +01:00
Takashi Iwai
86b2723725 ALSA: Make snd_printd() and snd_printdd() inline
Because currently snd_printd() and snd_printdd() macros are expanded
to empty when CONFIG_SND_DEBUG=n, a compile warning like below
appears sometimes, and we had to covert it by ugly ifdefs:
  sound/pci/hda/patch_sigmatel.c: In function ‘stac92hd71bxx_fixup_hp’:
  sound/pci/hda/patch_sigmatel.c:2434:24: warning: unused variable ‘spec’ [-Wunused-variable]

For "fixing" these issues better, this patch replaces snd_printd() and
snd_printdd() definitions with empty inline functions instead of
macros.  This should have the same effect but shut up warnings like
above.

But since we had already put ifdefs, changing to inline functions
would trigger compile errors.  So, such ifdefs is removed in this
patch.

In addition, snd_pci_quirk name field is defined only when
CONFIG_SND_DEBUG_VERBOSE is set, and the reference to it in
snd_printdd() argument triggers the build errors, too.  For avoiding
these errors, introduce a new macro snd_pci_quirk_name() that is
defined no matter how the debug option is set.

Reported-by: Stratos Karafotis <stratosk@semaphore.gr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-25 18:32:14 +01:00
Takashi Iwai
e152f18027 Merge branch 'for-linus' into for-next
This is a preliminary merge before the upcoming merge of generic parser
branch.
2013-01-23 08:31:34 +01:00
Eldad Zack
39e95156b9 ALSA: usb-audio: selector map for M-Audio FT C400
Add names of the clock sources for the M-Audio Fast Track
C400.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-14 10:06:11 +01:00
Eldad Zack
83e3acd494 ALSA: usb-audio: M-Audio FT C400 skip packet quirk
Attain constant real-world latency by skipping 16 data packets.
The number of packets to be skipped was found by trial and error.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-14 10:06:03 +01:00
Eldad Zack
2aad272b3f ALSA: usb-audio: correct M-Audio C400 clock source quirk
Taking another look at the C400 descriptors, I see now that there is
a clock selector (0x80) for this device.
Right now, the clock source points to the internal clock (0x81), which
is also valid. When the external clock source (0x82) is selected in the
mixer, and the rates mismatch (if it's free-running it is fixed to
48KHz), xruns will occur.

Set the clock ID to the clock selector unit (0x81), which then
allows the validation code to function correctly.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-14 10:05:57 +01:00
David Henningsson
b98ae2729d ALSA: usb - fix race in creation of M-Audio Fast track pro driver
A patch in the 3.2 kernel caused regression with hotplugging the
M-Audio Fast track pro, or sound after suspend. I don't have the
device so I haven't done a full analysis, but it seems userspace
(both udev and pulseaudio) got confused when a card was created,
immediately destroyed, and then created again.

However, at least one person in the bug report (martin djfun)
reports that this patch resolves the issue for him. It also leaves
a message in the log:
"snd-usb-audio: probe of 1-1.1:1.1 failed with error -5" which is
a bit misleading. It is better than non-working audio, but maybe
there's a more elegant solution?

BugLink: https://bugs.launchpad.net/bugs/1095315
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-14 10:03:03 +01:00
Takashi Iwai
31be5425d7 ALSA: usb-audio: Fix NULL dereference by access to non-existing substream
The commit [0d9741c0: ALSA: usb-audio: sync ep init fix for
audioformat mismatch] introduced the correction of parameters to be
set for sync EP.  But since the new code assumes that the sync EP is
always paired with the data EP of another direction, it triggers Oops
when a device only with a single direction is used.

This patch adds a proper check of sync EP type and the presence of the
paired substream for avoiding the crash.

Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-11 11:12:17 +01:00
Sachin Kamat
e8e7da23c9 ALSA: usb-audio: Make ebox44_table static
Fixes the following sparse warning:
sound/usb/mixer_quirks.c:1209:23: warning:
symbol 'ebox44_table' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-10 10:22:25 +01:00
Damien Zammit
b7b435e81b ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk
This patch is based on 3.8-rc1. It fixes two things:
1) A kernel panic caused by incorrect allocation of a u8 variable
   "bootresponse".
2) A noisy dmesg (urb status -32) caused by broken pipe to an
   invalid midi endpoint.

It is also a little cleaner because there is no need for a new
QUIRK_MIDI type as suggested by kernel developers, since the device
follows exactly the MIDIMAN protocol.

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-04 09:53:17 +01:00
Alexander Schremmer
8f7f3ab15e ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks
Support the Creative BT-D1 Bluetooth USB audio device. Before this
patch, Linux had trouble finding the correct USB descriptors and bailed
out with these messages:

 no or invalid class specific endpoint descriptor

Now it still prints these messages on hotplug:

 snd-usb-audio: probe of ...:1.0 failed with error -5
 snd-usb-audio: probe of ...:1.2 failed with error -5
 snd-usb-audio: probe of ...:1.3 failed with error -5

But the device works correctly, including the HID support.

The patch is diff'ed against 3.8-rc1 but should apply to older kernels
as well.

Signed-off-by: Alexander Schremmer <alex@alexanderweb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-03 14:26:48 +01:00
Pierre-Louis Bossart
e4cc615340 ALSA: usb-audio: support delay calculation on capture streams
Enable delay report on capture path. The delay is reset when an
URB is retired and increment at each call to .pointer based
on frame counter changes. The precision of the delay
information is limited to 1ms as in the playback case.

This reverts commit 3f94fad095.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-24 10:53:57 +01:00
Linus Torvalds
03c850ec32 Sound fixes for 3.8-rc1
This update contains overall only driver-specific fixes.
 Slightly large LOC are seen in usb-audio driver for a couple of new
 device quirks and cs42l71 ASoC driver for enhanced features.
 The others are a few small (regression) fixes HD-audio, and yet other
 small / trival ASoC fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ0thSAAoJEGwxgFQ9KSmk/i8P+wcdjCcp5FdfZ5YP2h9siEw5
 7KJPwwk9eTa0PVB5olgabxSh6L5P+rM69OGiXnHSKF8RwsuZDRp/5pPcaoUVRzH/
 6uibGozfLApeLBuBAJZ96eJhRIigysoSrm5W4FQeNVAbwK67zpIjP/xGwKa0+qfO
 vsK/BtSn+nVsmFpgOfO6vXZ7gKBlfKGXHYdyFVXzHEhGYSHLdf1IDxnCapIXlh78
 0nXHD2FHgKlSM6y/S6W7wiUwyNqbgmnZHwh29iIyes1CrX0wVyvtos3qgwJHukrU
 WVY87E1TDxD6HLAWTUxqeOIvNyucSarUZ+kvtYg0i31gmRCY8QNXqYVp1wBybqVd
 Uwbwe4qWwSxXhXluodFsizNwcH9T+KA3IM4B5u6yCT1pFY759pCh/KpLoNfD+maL
 6atnBU6lvtTCMxoeSyJFSdAjdOQJUpylQ9TyQaI/PIr6jrEMVC2ki/i3UX+YpQGo
 oWJj5x8Nl58MUv7GhYGTo7vfm3ZqaUbxN/YugbCeVkrcV0McJNycvddotplD4iTd
 pqfep1fVpefW9X4pJnvsys2neo7R8e8a87Qg2CfVGXQ91ijevPCf+YAh4EmHShsT
 vwNcOP/gZ+qQp/bY40SigMj5SZtZ/ZQxT47yPo6OLI4FyhyD+WK4l1AAEK5B1uPA
 odsIcQg2F6/RjzkDSsSl
 =JoY5
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This update contains overall only driver-specific fixes.  Slightly
  large LOC are seen in usb-audio driver for a couple of new device
  quirks and cs42l71 ASoC driver for enhanced features.  The others are
  a few small (regression) fixes HD-audio, and yet other small / trival
  ASoC fixes."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:
  ALSA: HDA: Fix sound resume hang
  ALSA: hda - bug fix for invalid connection list of Haswell HDMI codec pins
  ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup
  ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs
  ASoC: atmel-ssc: change disable to disable in dts node
  ASoC: Prevent pop_wait overwrite
  ALSA: usb-audio: ignore-quirk for HP Wireless Audio
  ALSA: hda - Always turn on pins for HDMI/DP
  ALSA: hda - Fix pin configuration of HP Pavilion dv7
  ASoC: core: Fix splitting of log messages
  ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT
  ASoC: cs42l73: Add DAPM events for power down.
  ASoC: cs42l73: Add DMIC's as DAPM inputs.
  ASoC: sigmadsp: Fix endianness conversion issue
  ASoC: tpa6130a2: Use devm_* APIs
2012-12-20 07:52:13 -08:00
Damien Zammit
cb99864d40 ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:
This patch is the result of a lot of trial and error, since there are no specs
available for the device.

Full duplex support is provided, i.e. playback and recording in stereo.
The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the
device supports.  Also, MIDI in and MIDI out both work.

Users will notice that the S/PDIF light also flashes when playback or recording
is active.  I believe this means that S/PDIF input/output is simultaneously
activated with the analogue i/o during use.
But this particular functionality remains untested.

Note that this particular version of the patch is so far untested on the
physical hardware because I have not compiled a full kernel with the changes.
However, extensive testing has been done by many users of the hardware
who believe other versions of my patch have worked since circa 2009.

[Modified to make a function static by tiwai]

Signed-off-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-19 11:27:22 +01:00
Eldad Zack
df68f10643 ALSA: usb-audio: ignore-quirk for HP Wireless Audio
As Joe Cooper <swelljoe@gmail.com> reported, "On most HP Envy laptops
the snd-usb-audio module causes the system to become unresponsive and
Gnome Shell 3 to crash.".
See also:
 http://mailman.alsa-project.org/pipermail/alsa-devel/2012-December/057729.html

Add a quirk to ignore this device (for now) to solve the instability
issue and allow other USB audio devices to be used.

Reported-by: Joe Cooper <swelljoe@gmail.com>
Tested-by: Isaac Smith <hunternet93@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-15 11:13:10 +01:00
Linus Torvalds
a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Denis Washington
1d31affbef ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
The only required change is to extend the existing Xonar U1
mixer quirks to the U3, which seems to be controlled the same
way.

Signed-off-by: Denis Washington <denisw@online.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-12 11:32:54 +01:00
Jurgen Kramer
9621055fbb ALSA: usb6fire: prevent driver panic state when stopping
The patch below prevents the 6fire usb driver going into panic state
when stopping playing. On some systems the urb in handler
(usb6fire_pcm_in_urb_handler) is being called while urbs are being
killed off, this causes the driver to set panic state and can result in
the kernel warning 'URB %p submitted while active'.

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 15:03:34 +01:00
Bill Pemberton
14c56706f9 ALSA: snd-usb-caiaq: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:35:11 +01:00
Bill Pemberton
87f9796a03 ALSA: snd-usb-6fire: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:34:46 +01:00
Eldad Zack
0d9741c0e0 ALSA: usb-audio: sync ep init fix for audioformat mismatch
Commit 947d299686 , "ALSA: snd-usb:
properly initialize the sync endpoint", while correcting the
initialization of the sync endpoint when opening just the data
endpoint, prevents devices that has a sync endpoint, with a channel
number different than that of the data endpoint, from functioning.
Due to a different channel and period bytes count, attempting to
initialize the sync endpoint will fail at the usb host driver.
For example, when using xhci:

 cannot submit urb 0, error -90: internal error

With this patch, if a sync endpoint has multiple audioformats, a
matching audioformat is preferred. An audioformat must be found
with at least one channel and support the requested sample rate
and PCM format, otherwise the stream will not be opened.

If the number of channels differ between the selected audioformat
and the requested format, adjust the period bytes count accordingly.
It is safe to perform the calculation on the basis of the channel
count, since the requested PCM audio format and the rate must be
supported by the selected audioformat.

Cc: Jeffrey Barish <jeff_barish@earthlink.net>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 08:14:31 +01:00
Takashi Iwai
f5f165418c ALSA: usb-audio: Fix missing autopm for MIDI input
The commit [88a8516a: ALSA: usbaudio: implement USB autosuspend] added
the support of autopm for USB MIDI output, but it didn't take the MIDI
input into account.

This patch adds the following for fixing the autopm:
- Manage the URB start at the first MIDI input stream open, instead of
  the time of instance creation
- Move autopm code to the common substream_open()
- Make snd_usbmidi_input_start/_stop() more robust and add the running
  state check

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 07:27:44 +01:00
Takashi Iwai
59866da9e4 ALSA: usb-audio: Avoid autopm calls after disconnection
Add a similar protection against the disconnection race and the
invalid use of usb instance after disconnection, as well as we've done
for the USB audio PCM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51201

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 07:27:27 +01:00
David Henningsson
9b4ef97757 ALSA: usb - Don't create "Speaker" mixer controls on headphones and headsets
A lot of headsets/headphones have a "Speaker" mixer control. This confuses
PulseAudio to think it is a speaker instead of a headphone/headset.
Therfore, we rename it to "Headphone".

We determine if something is a headphone similar to how udev determines
form factor (see 78-sound-card.rules).

BugLink: https://bugs.launchpad.net/bugs/1082357
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 13:59:47 +01:00
Eldad Zack
ca10a7ebdf ALSA: usb-audio: FT C400 sync playback EP to capture EP
The playback endpoint uses implicit feedback mode, similar
to the M-Audio FTU. Like with the FTU, we need to associate
the sync pipe ourselves.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 08:45:18 +01:00
Eldad Zack
09d8e3a71d ALSA: usb-audio: Fast Track C400 mixer controls
Add a mixer quirks for the M-Audio Fast Track C400
and create the following:

* Volume controls
* Effect Type (reusing FTU controls)
* Effect Volume
* Effect Send/Return
* Effect Program
* Effect Feedback

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 08:44:55 +01:00
Eldad Zack
d50ed624e4 ALSA: usb-audio: Fast Track C400 mixer ranges
Add ranges for various Fast Track C400 controls, as observed
while using the vendor's mixer control software (res values
are an estimation).

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 08:44:42 +01:00