This patch adds secy pointer initialization in the macsec_context.
It will be used by MAC drivers in offloading operations.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to reference a net_device from a MACsec context. This
is needed to allow implementing MACsec operations in net device drivers.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a reference to MACsec ops to the net_device structure,
allowing net device drivers to implement offloading operations for
MACsec.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduce a new netdev feature, which will be used by drivers
to state they can perform MACsec transformations in hardware.
The patchset was gathered by Mark, macsec functinality itself
was implemented by Dmitry, Mark and Pavel Belous.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BIT() macro definition is internal to the Linux kernel and is not
to be used in UAPI headers; replace its usage with the _BITUL() macro
that is already used elsewhere in the header.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is trivial since we already have support for the entirely
identical (from the kernel's point of view) RDNSS, DNSSL, etc. that
also contain opaque data that needs to be passed down to userspace
for further processing.
As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft,
it is purely waiting on the RFC Editor for cleanups and publishing):
PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix.
The 8-bit identifier of the option type as assigned by the IANA is 38.
Since we lack DNS64/NAT64/CLAT support in kernel at the moment,
thus this option should also be passed on to userland.
See:
https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5
Cc: Erik Kline <ek@google.com>
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Michael Haro <mharo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko says:
====================
net: ethernet: ti: add networking support for k3 am65x/j721e soc
This v6 series adds basic networking support support TI K3 AM654x/J721E SoC which
have integrated Gigabit Ethernet MAC (Media Access Controller) into device MCU
domain and named MCU_CPSW0 (CPSW2G NUSS).
Formally TRMs refer CPSW2G NUSS as two-port Gigabit Ethernet Switch subsystem
with port 0 being the CPPI DMA host port and port 1 being the external Ethernet
port, but for 1 external port device it's just Port 0 <-> ALE <-> Port 1 and it's
rather device with HW filtering capabilities then actually switching device.
It's expected to have similar devices, but with more external ports.
The new Host port 0 Communications Port Programming Interface (CPPI5) is
operating by TI AM654x/J721E NAVSS Unified DMA Peripheral Root Complex (UDMA-P)
controller [1].
The CPSW2G contains below modules for which existing code is re-used:
- MAC SL: cpsw_sl.c
- Address Lookup Engine (ALE): cpsw_ale.c, basically compatible with K2 66AK2E/G
- Management Data Input/Output interface (MDIO): davinci_mdio.c, fully
compatible with TI AM3/4/5 devices
Basic features supported by CPSW2G NUSS driver:
- VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
- multicast filtering
- promisc mode
- TX multiq support in Round Robin or Fixed priority modes
- RX checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets
- TX checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only).
Features under development:
- Support for IEEE 1588 Clock Synchronization. The CPSW2G NUSS includes new
version of Common Platform Time Sync (CPTS)
- tc-mqprio: priority level Quality Of Service (QOS) support (802.1p)
- tc-cbs: Support for Audio/Video Bridging (P802.1Qav/D6.0) HW shapers
- tc-taprio: IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
- frame preemption: IEEE P902.3br/D2.0 Interspersing Express Traffic, 802.1Qbu
- extended ALE features: classifier/policers, auto-aging
Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3 Platform
tree and provided here for testing purposes.
Changes in v6:
- fixed comments from Rob Herring <robh@kernel.org> and added his Reviewed-by.
- added Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Changes in v5:
- renamed files k3-udma-desc-pool.* k3-udma-desc-pool to k3-cppi-desc-pool.*,
and API to k3_cppi_desc_pool_* as requested by Peter Ujfalusi <peter.ujfalusi@ti.com>
- fixed copy-paste err in am65_cpsw_nuss_ndo_slave_set_rx_mode() which blocked
recieving of mcast frames.
- added Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Changes in v4:
- fixed minor comments from Jakub Kicinski <kuba@kernel.org>
- dependencies resolved: required phy-rmii-sel changes [2] queued for merge
except one [3] which is included in this series with Kishon's ask.
Changes in v3:
- add ARM64 defconfig changes for testing purposes
- fixed DT yaml definition
- fixed comments from Jakub Kicinski <kuba@kernel.org>
Changes in v2:
- fixed DT yaml definition
- fixed comments from David Miller
v5: https://patchwork.ozlabs.org/cover/1258295/
v4: https://patchwork.ozlabs.org/cover/1256092/
v3: https://patchwork.ozlabs.org/cover/1254568/
v2: https://patchwork.ozlabs.org/cover/1250674/
v1: https://lwn.net/Articles/813087/
TRMs:
AM654: http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
J721E: http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf
Preliminary documentation can be found at:
http://software-dl.ti.com/processor-sdk-linux/esd/docs/latest/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/K3_CPSW2g.html
[1] https://lwn.net/Articles/808030/
[2] https://lkml.org/lkml/2020/2/22/100
[3] https://lkml.org/lkml/2020/3/3/724
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable TI K3 AM654x/J721E DMA and networking options.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW
NUSS Port 1 in rgmii-rxid mode.
Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU
Gigabit Ethernet two ports Switch subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT node for The TI J721E MCU SoC Gigabit Ethernet
subsystem (MCU CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS
Port 1 in rgmii-rxid mode.
Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit
Ethernet two ports Switch subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch
subsystem (CPSW NUSS).
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI AM65x/J721E SoCs Gigabit Ethernet Switch subsystem (CPSW2G NUSS) has
two ports - One Ethernet port (port 1) with selectable RGMII and RMII
interfaces and an internal Communications Port Programming Interface (CPPI)
port (Host port 0) and with ALE in between. It also contains
- Management Data Input/Output (MDIO) interface for physical layer device
(PHY) management;
- Updated Address Lookup Engine (ALE) module;
- (TBD) New version of Common platform time sync (CPTS) module.
On the TI am65x/J721E SoCs CPSW NUSS Ethernet subsystem into device MCU
domain named MCU_CPSW0.
Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX
channels and one RX channels operating by TI am654 NAVSS Unified DMA
Peripheral Root Complex (UDMA-P) controller.
Introduced driver provides standard Linux net_device to user space and supports:
- ifconfig up/down
- MAC address configuration
- ethtool operation:
--driver
--change
--register-dump
--negotiate phy
--statistics
--set-eee phy
--show-ring
--show-channels
--set-channels
- net_device ioctl mii-control
- promisc mode
- rx checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets.
The CPSW NUSS can verify IPv4/IPv6 TCP/UDP packets checksum and fills
csum information for each packet in psdata[2] word:
- BIT(16) CHECKSUM_ERROR - indicates csum error
- BIT(17) FRAGMENT - indicates fragmented packet
- BIT(18) TCP_UDP_N - Indicates TCP packet was detected
- BIT(19) IPV6_VALID, BIT(20) IPV4_VALID - indicates IPv6/IPv4 packet
- BIT(15, 0) CHECKSUM_ADD - This is the value that was summed
during the checksum computation. This value is FFFFh for non fragmented
IPV4/6 UDP/TCP packets with no checksum error.
RX csum offload can be disabled:
ethtool -K <dev> rx-checksum on|off
- tx checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only).
TX csum HW offload can be enabled/disabled:
ethtool -K <dev> tx-checksum-ip-generic on|off
- multiq and switch between round robin/prio modes for cppi tx queues by
using Netdev private flag "p0-rx-ptype-rrobin" to switch between
Round Robin and Fixed priority modes:
# ethtool --show-priv-flags eth0
Private flags for eth0:
p0-rx-ptype-rrobin: on
# ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off
Number of TX DMA channels can be changed using "ethtool -L eth0 tx <N>".
- GRO support: the napi_gro_receive() and napi_complete_done() are used.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document device tree bindings for The TI AM654x/J721E SoC Gigabit Ethernet MAC
(Media Access Controller - CPSW2G NUSS). The CPSW NUSS provides Ethernet packet
communication for the device.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for default thread configuration for AM65x CPSW NUSS ALE to
allow route all ingress packets to one default RX UDMA flow.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new CPSW ALE version, available on TI K3 AM654/J721E SoCs family,
allows to switch any external port to MAC only mode. When MAC only mode
enabled this port be treated like a MAC port for the host. All traffic
received is only sent to the host. The host must direct traffic to this
port as the lookup engine will not send traffic to the ports with the
p0_maconly bit set and the p0_no_learn also set. If p0_maconly bit is set
and the p0_no_learn is not set, the host can send non-directed packets that
can be sent to the destination of a MacOnly port. It is also possible that
The host can broadcast to all ports including MacOnly ports in this mode.
This patch add ALE supprt for MAC only mode.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS the unregistered multicast
packets are still can be received with promisc and allmulti disabled.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
ALE VLAN entry:UNREG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXx
ALE VLAN entry:REG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXy
The commit b361da8373 ("net: netcp: ale: add proper ale entry mask bits
for netcp switch ALE") update ALE code to support such ALE entries, it is
always used ALE_VLAN_MASK_MUX0_REG index in ALE VLAN entry for unreg mcast
packets mask configuration, which is read-only, at least for AM65xx MCU
CPSW2G NUSS and 66AK2E/L NUSS. As result unreg mcast packets are allowed
always.
Hence, update ALE code to use ALE_VLAN_MASK_MUX1_REG index for ALE VLAN
entries to configure unreg mcast port mask.
Fixes: b361da8373 ("net: netcp: ale: add proper ale entry mask bits for netcp switch ALE")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty
complex Kconfig dependencies are defined for phy-gmii-sel driver, which
also need to be updated every time phy-gmii-sel is re-used for any new
networking driver.
Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all
dependencies and from networking drivers and rely on using 'imply
PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
cls_flower: Use extack in fl_set_key()
Add missing extack messages in fl_set_key(), so that users can get more
meaningfull error messages when netlink attributes are rejected.
Patch 1 also extends extack in tcf_change_indev() (in pkt_cls.h) since
this function is used by fl_set_key().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack down to fl_set_key_flags() and set message on error.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack down to fl_set_key_port_range() and set message on error.
Both the min and max ports would qualify as invalid attributes here.
Report the min one as invalid, as it's probably what makes the most
sense from a user point of view.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack down to fl_set_key_mpls() and set message on error.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an error message when device wasn't found.
While there, also set the bad attribute's offset in extack.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz says:
====================
net: phy: marvell usb to mdio controller
Support for an MDIO controller present on development boards for
Marvell switches from the Link Street (88E6xxx) family.
v3->v4:
- Remove unnecessary dependency on OF_MDIO.
v2->v3:
- Rename driver smi2usb -> mvusb.
- Clean up unused USB references.
v1->v2:
- Reverse christmas tree ordering of local variables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An MDIO controller present on development boards for Marvell switches
from the Link Street (88E6xxx) family.
Using this module, you can use the following setup as a development
platform for switchdev and DSA related work.
.-------. .-----------------.
| USB----USB |
| SoC | | 88E6390X-DB ETH1-10
| ETH----ETH0 |
'-------' '-----------------'
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Describe how the USB to MDIO controller can optionally use device tree
bindings to reference attached devices such as switches.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we have scenarios like
mdiobus_register()
-> loads PHY driver module(s)
-> registers PHY driver(s)
-> may schedule async probe
phydev = mdiobus_get_phy()
<phydev action involving PHY driver>
or
phydev = phy_device_create()
-> loads PHY driver module
-> registers PHY driver
-> may schedule async probe
<phydev action involving PHY driver>
then we expect the PHY driver to be bound to the phydev when triggering
the action. This may not be the case in case of asynchronous probing.
Therefore ensure that PHY drivers are probed synchronously.
Default still is sync probing, except async probing is explicitly
requested. I saw some comments that the intention is to promote
async probing for more parallelism in boot process and want to be
prepared for the case that the default is changed to async probing.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller says:
====================
implement DEVLINK_CMD_REGION_NEW
This series adds support for the DEVLINK_CMD_REGION_NEW operation, used to
enable userspace requesting a snapshot of a region on demand.
This can be useful to enable adding regions for a driver for which there is
no trigger to create snapshots. By making this a core part of devlink, there
is no need for the drivers to use a separate channel such as debugfs.
The primary intent for this kind of region is to expose device information
that might be useful for diagnostics and information gathering.
The first few patches refactor regions to support a new ops structure for
extending the available operations that regions can perform. This includes
converting the destructor into an op from a function argument.
Next, patches refactor the snapshot id allocation to use an xarray which
tracks the number of current snapshots using a given id. This is done so
that id lifetime can be determined, and ids can be released when no longer
in use.
Without this change, snapshot ids remain used forever, until the snapshot_id
count rolled over UINT_MAX.
Finally, code to enable the previously unused DEVLINK_CMD_REGION_NEW is
added. This code enforces that the snapshot id is always provided, unlike
previous revisions of this series.
Finally, a patch is added to enable using this new command via the .snapshot
callback in both netdevsim and the ice driver.
For the ice driver, a new "nvm-flash" region is added, which will enable
read access to the NVM flash contents. The intention for this is to allow
diagnostics tools to gather information about the device. By using a
snapshot and gathering the NVM contents all at once, the contents can be
atomic.
Links to previous discussions:
1st RFC - https://lore.kernel.org/netdev/20200130225913.1671982-1-jacob.e.keller@intel.com/
2nd RFC - https://lore.kernel.org/netdev/20200214232223.3442651-1-jacob.e.keller@intel.com/
v1 - https://lore.kernel.org/netdev/20200324223445.2077900-1-jacob.e.keller@intel.com/
v2 - https://lore.kernel.org/netdev/20200326035157.2211090-1-jacob.e.keller@intel.com/
Major changes since RFC:
* use an xarray for tracking snapshot ids, rather than an IDR
* remove support for auto-generated snapshot ids in DEVLINK_CMD_REGION_NEW
See each patch for an individual changelog per-patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a devlink region for exposing the device's Non Volatime Memory flash
contents.
Support the recently added .snapshot operation, enabling userspace to
request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the .snapshot region operation for the dummy data region. This
enables a region snapshot to be taken upon request via the new
DEVLINK_CMD_REGION_SNAPSHOT command.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for the DEVLINK_CMD_REGION_NEW command for creating
snapshots. This new command parallels the existing
DEVLINK_CMD_REGION_DEL.
In order for DEVLINK_CMD_REGION_NEW to work for a region, the new
".snapshot" operation must be implemented in the region's ops structure.
The desired snapshot id must be provided. This helps avoid confusion on
the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler.
The requested id will be inserted into the xarray tracking the number of
snapshots using each id. If this id is already used by another snapshot
on any region, an error will be returned.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each snapshot created for a devlink region must have an id. These ids
are supposed to be unique per "event" that caused the snapshot to be
created. Drivers call devlink_region_snapshot_id_get to obtain a new id
to use for a new event trigger. The id values are tracked per devlink,
so that the same id number can be used if a triggering event creates
multiple snapshots on different regions.
There is no mechanism for snapshot ids to ever be reused. Introduce an
xarray to store the count of how many snapshots are using a given id,
replacing the snapshot_id field previously used for picking the next id.
The devlink_region_snapshot_id_get() function will use xa_alloc to
insert an initial value of 1 value at an available slot between 0 and
U32_MAX.
The new __devlink_snapshot_id_increment() and
__devlink_snapshot_id_decrement() functions will be used to track how
many snapshots currently use an id.
Drivers must now call devlink_snapshot_id_put() in order to release
their reference of the snapshot id after adding region snapshots.
By tracking the total number of snapshots using a given id, it is
possible for the decrement() function to erase the id from the xarray
when it is not in use.
With this method, a snapshot id can become reused again once all
snapshots that referred to it have been deleted via
DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots.
This work also paves the way to introduce a mechanism for userspace to
request a snapshot.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink_snapshot_id_get() function returns a snapshot id. The
snapshot id is a u32, so there is no way to indicate an error code.
A future change is going to possibly add additional cases where this
function could fail. Refactor the function to return the snapshot id in
an argument, so that it can return zero or an error value.
This ensures that snapshot ids cannot be confused with error values, and
aids in the future refactor of snapshot id allocation management.
Because there is no current way to release previously used snapshot ids,
add a simple check ensuring that an error is reported in case the
snapshot_id would over flow.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A future change is going to implement a new devlink command to request
a snapshot on demand. As part of this, the logic for handling the
snapshot ids will be refactored. To simplify the snapshot id allocation
function, move it to a separate function prefixed by `__`. This helper
function will assume the lock is held.
While no other callers will exist, it simplifies refactoring the logic
because there is no need to complicate the function with gotos to handle
unlocking on failure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink_region_snapshot_create function returns -ENOMEM when the
maximum number of snapshots has been reached. This is confusing because
it is not an issue of being out of memory. Change this to use -ENOSPC
instead.
Reported-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A future change is going to add a new devlink command to request
a snapshot on demand. This function will want to call the
devlink_region_snapshot_create function while already holding the
devlink instance lock.
Extract the logic of this function into a static function prefixed by
`__` to indicate that it is an internal helper function. Modify the
original function to be implemented in terms of the new locked
function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function documentation comment for devlink_region_snapshot_create
included a literal tab character between 'future analyses' that was
difficult to spot as it happened to only display as one space wide.
Fix the comment to use a space here instead of a stray tab appearing in
the middle of a sentence.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It does not makes sense that two snapshots for a given region would use
different destructors. Simplify snapshot creation by adding
a .destructor op for regions.
This operation will replace the data_destructor for the snapshot
creation, and makes snapshot creation easier.
Noticed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the devlink region code in preparation for adding new operations
on regions.
Create a devlink_region_ops structure, and move the name pointer from
within the devlink_region structure into the ops structure (similar to
the devlink_health_reporter_ops).
This prepares the regions to enable support of additional operations in
the future such as requesting snapshots, or accessing the region
directly without a snapshot.
In order to re-use the constant strings in the mlx4 driver their
declaration must be changed to 'const char * const' to ensure the
compiler realizes that both the data and the pointer cannot change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi says:
====================
veth: move ndo_xdp_xmit stats to peer veth_rq
Move ndo_xdp_xmit ethtool stats accounting to peer veth_rq.
Move XDP_TX accounting to veth_xdp_flush_bq routine.
Changes since v1:
- rename xdp_xmit[_err] counters to peer_tq_xdp_xmit[_err]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rely on 'remote' veth_rq to account ndo_xdp_xmit ethtool counters.
Move XDP_TX accounting to veth_xdp_flush_bq routine.
Remove 'rx' prefix in rx xdp ethool counters
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Substitute net_device point with veth_rq one in veth_xdp_flush_bq,
veth_xdp_flush and veth_xdp_tx signature. This is a preliminary patch
to account xdp_xmit counter on 'receiving' veth_rq
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set.
---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
#define __pfn_to_page(pfn) (vmemmap + (pfn))
^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’
#define pfn_to_page __pfn_to_page
^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------
Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.
Fixes: 8ad8b72721 (riscv: Add KASAN support)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Petr Machata says:
====================
Implement stats_update callback for pedit and skbedit
The stats_update callback is used for adding HW counters to the SW ones.
Both skbedit and pedit actions are actually recognized by flow_offload.h,
but do not implement these callbacks. As a consequence, the reported values
are only the SW ones, even where there is a HW counter available.
Patch #1 adds the callback to action skbedit, patch #2 adds it to action
pedit. Patch #3 tweaks an skbedit selftest with a check that would have
caught this problem.
The pedit test is not likewise tweaked, because the iproute2 pedit action
currently does not support JSON dumping. This will be addressed later.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the test checks the observable effect of skbedit priority:
queueing of packets at the correct qdisc band. It therefore misses the fact
that the counters for offloaded rules are not updated. Add an extra check
for the counter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
