For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: stable@vger.kernel.org
Fixes: 98e828a065 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The inode_getsecctx LSM hook has previously been corrected to have
-EOPNOTSUPP instead of 0 as the default return value to fix BPF LSM
behavior. However, the call_int_hook()-generated loop in
security_inode_getsecctx() was left treating 0 as the neutral value, so
after an LSM returns 0, the loop continues to try other LSMs, and if one
of them returns a non-zero value, the function immediately returns with
said value. So in a situation where SELinux and the BPF LSMs registered
this hook, -EOPNOTSUPP would be incorrectly returned whenever SELinux
returned 0.
Fix this by open-coding the call_int_hook() loop and making it use the
correct LSM_RET_DEFAULT() value as the neutral one, similar to what
other hooks do.
Cc: stable@vger.kernel.org
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Link: https://lore.kernel.org/selinux/CAEjxPJ4ev-pasUwGx48fDhnmjBnq_Wh90jYPwRQRAqXxmOKD4Q@mail.gmail.com/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2257983
Fixes: b36995b860 ("lsm: fix default return value for inode_getsecctx")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZZ0pVhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5RVMAQDm9J+iiY/2Af75vOTKIZXtGF6KsBpx
9b9ALPqPNZPgugD+PfwSbS+6rO8AItXE0Q2+FwtDaV8LxgSwK9vGeCHI2wM=
=yinc
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
- Add a new IMA/EVM maintainer and reviewer
- Disable EVM on overlayfs
The EVM HMAC and the original file signatures contain filesystem
specific metadata (e.g. i_ino, i_generation and s_uuid), preventing
the security.evm xattr from directly being copied up to the overlay.
Further before calculating and writing out the overlay file's EVM
HMAC, EVM must first verify the existing backing file's
'security.evm' value.
For now until a solution is developed, disable EVM on overlayfs.
- One bug fix and two cleanups
* tag 'integrity-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
overlay: disable EVM
evm: add support to disable EVM on unsupported filesystems
evm: don't copy up 'security.evm' xattr
MAINTAINERS: Add Eric Snowberg as a reviewer to IMA
MAINTAINERS: Add Roberto Sassu as co-maintainer to IMA and EVM
KEYS: encrypted: Add check for strsep
ima: Remove EXPERIMENTAL from Kconfig
ima: Reword IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmWYKUIUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNyHw/+IKnqL1MZ5QS+/HtSzi4jCL47N9yZ
OHLol6XswyEGHH9myKPPGnT5lVA93v98v4ty2mws7EJUSGZQQUntYBPbU9Gi40+B
XDzYSRocoj96sdlKeOJMgaWo3NBRD9HYSoGPDNWZixy6m+bLPk/Dqhn3FabKf1lo
2qQSmstvChFRmVNkmgaQnBCAtWVqla4EJEL0EKX6cspHbuzRNTeJdTPn6Q/zOUVL
O2znOZuEtSVpYS7yg3uJT0hHD8H0GnIciAcDAhyPSBL5Uk5l6gwJiACcdRfLRbgp
QM5Z4qUFdKljV5XBCzYnfhhrx1df08h1SG84El8UK8HgTTfOZfYmawByJRWNJSQE
TdCmtyyvEbfb61CKBFVwD7Tzb9/y8WgcY5N3Un8uCQqRzFIO+6cghHri5NrVhifp
nPFlP4klxLHh3d7ZVekLmCMHbpaacRyJKwLy+f/nwbBEID47jpPkvZFIpbalat+r
QaKRBNWdTeV+GZ+Yu0uWsI029aQnpcO1kAnGg09fl6b/dsmxeKOVWebir25AzQ++
a702S8HRmj80X+VnXHU9a64XeGtBH7Nq0vu0lGHQPgwhSx/9P6/qICEPwsIriRjR
I9OulWt4OBPDtlsonHFgDs+lbnd0Z0GJUwYT8e9pjRDMxijVO9lhAXyglVRmuNR8
to2ByKP5BO+Vh8Y=
=Py+n
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The security.evm HMAC and the original file signatures contain
filesystem specific data. As a result, the HMAC and signature
are not the same on the stacked and backing filesystems.
Don't copy up 'security.evm'.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation for pre-content permission events with file access range,
move fsnotify_file_perm() hook out of security_file_permission() and into
the callers.
Callers that have the access range information call the new hook
fsnotify_file_area_perm() with the access range.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-6-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
We would like to make changes to the fsnotify access permission hook -
add file range arguments and add the pre modify event.
In preparation for these changes, split the fsnotify_perm() hook into
fsnotify_open_perm() and fsnotify_file_perm().
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231212094440.250945-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
As suggested by the kernel test robot, memdup_user() is a better
option than the combo of kmalloc()/copy_from_user().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310270805.2ArE52i5-lkp@intel.com/
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Using the size of a void pointer is much cleaner than
BITS_PER_LONG / 8.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
While we have a lsm_fill_user_ctx() helper function designed to make
life easier for LSMs which return lsm_ctx structs to userspace, we
didn't include all of the buffer length safety checks and buffer
padding adjustments in the helper. This led to code duplication
across the different LSMs and the possibility for mistakes across the
different LSM subsystems. In order to reduce code duplication and
decrease the chances of silly mistakes, we're consolidating all of
this code into the lsm_fill_user_ctx() helper.
The buffer padding is also modified from a fixed 8-byte alignment to
an alignment that matches the word length of the machine
(BITS_PER_LONG / 8).
Signed-off-by: Paul Moore <paul@paul-moore.com>
We should return -EINVAL if the user specifies LSM_FLAG_SINGLE without
supplying a valid lsm_ctx struct buffer.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Zero out all of the size counters in the -E2BIG case (buffer too
small) to help make the current code a bit more robust in the face of
future code changes.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since IMA is not yet an LSM, don't account for it in the LSM_CONFIG_COUNT
calculation, used to limit how many LSMs can invoke security_add_hooks().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add lsm_name_to_attr(), which translates a text string to a
LSM_ATTR value if one is available.
Add lsm_fill_user_ctx(), which fills a struct lsm_ctx, including
the trailing attribute value.
Both are used in module specific components of LSM system calls.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a system call lsm_get_self_attr() to provide the security
module maintained attributes of the current process.
Create a system call lsm_set_self_attr() to set a security
module maintained attribute of the current process.
Historically these attributes have been exposed to user space via
entries in procfs under /proc/self/attr.
The attribute value is provided in a lsm_ctx structure. The structure
identifies the size of the attribute, and the attribute value. The format
of the attribute value is defined by the security module. A flags field
is included for LSM specific information. It is currently unused and must
be 0. The total size of the data, including the lsm_ctx structure and any
padding, is maintained as well.
struct lsm_ctx {
__u64 id;
__u64 flags;
__u64 len;
__u64 ctx_len;
__u8 ctx[];
};
Two new LSM hooks are used to interface with the LSMs.
security_getselfattr() collects the lsm_ctx values from the
LSMs that support the hook, accounting for space requirements.
security_setselfattr() identifies which LSM the attribute is
intended for and passes it along.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use the LSM ID number instead of the LSM name to identify which
security module's attibute data should be shown in /proc/self/attr.
The security_[gs]etprocattr() functions have been changed to expect
the LSM ID. The change from a string comparison to an integer comparison
in these functions will provide a minor performance improvement.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As LSMs are registered add their lsm_id pointers to a table.
This will be used later for attribute reporting.
Determine the number of possible security modules based on
their respective CONFIG options. This allows the number to be
known at build time. This allows data structures and tables
to use the constant.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a struct lsm_id to contain identifying information about Linux
Security Modules (LSMs). At inception this contains the name of the
module and an identifier associated with the security module. Change
the security_add_hooks() interface to use this structure. Change the
individual modules to maintain their own struct lsm_id and pass it to
security_add_hooks().
The values are for LSM identifiers are defined in a new UAPI
header file linux/lsm.h. Each existing LSM has been updated to
include it's LSMID in the lsm_id.
The LSM ID values are sequential, with the oldest module
LSM_ID_CAPABILITY being the lowest value and the existing modules
numbered in the order they were included in the main line kernel.
This is an arbitrary convention for assigning the values, but
none better presents itself. The value 0 is defined as being invalid.
The values 1-99 are reserved for any special case uses which may
arise in the future. This may include attributes of the LSM
infrastructure itself, possibly related to namespacing or network
attribute management. A special range is identified for such attributes
to help reduce confusion for developers unfamiliar with LSMs.
LSM attribute values are defined for the attributes presented by
modules that are available today. As with the LSM IDs, The value 0
is defined as being invalid. The values 1-99 are reserved for any
special case uses which may arise in the future.
Cc: linux-security-module <linux-security-module@vger.kernel.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mickael Salaun <mic@digikod.net>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
[PM: forward ported beyond v6.6 due merge window changes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.
Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The 'bprm_committing_creds' hook has implementations registered in
SELinux and Apparmor. Looking at the function implementations we observe
that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committing_creds()
as 'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The 'bprm_creds_from_file' hook has implementation registered in
commoncap. Looking at the function implementation we observe that the
'file' parameter is not changing.
Mark the 'file' parameter of LSM hook security_bprm_creds_from_file() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux registers the implementation for the "quotactl" hook. Looking at
the function implementation we observe that the parameter "sb" is not
changing.
Mark the "sb" parameter of LSM hook security_quotactl() as "const" since
it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=dnm4
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Add proper multi-LSM support for xattrs in the
security_inode_init_security() hook
Historically the LSM layer has only allowed a single LSM to add an
xattr to an inode, with IMA/EVM measuring that and adding its own as
well. As we work towards promoting IMA/EVM to a "proper LSM" instead
of the special case that it is now, we need to better support the
case of multiple LSMs each adding xattrs to an inode and after
several attempts we now appear to have something that is working
well. It is worth noting that in the process of making this change we
uncovered a problem with Smack's SMACK64TRANSMUTE xattr which is also
fixed in this pull request.
- Additional LSM hook constification
Two patches to constify parameters to security_capget() and
security_binder_transfer_file(). While I generally don't make a
special note of who submitted these patches, these were the work of
an Outreachy intern, Khadija Kamran, and that makes me happy;
hopefully it does the same for all of you reading this.
- LSM hook comment header fixes
One patch to add a missing hook comment header, one to fix a minor
typo.
- Remove an old, unused credential function declaration
It wasn't clear to me who should pick this up, but it was trivial,
obviously correct, and arguably the LSM layer has a vested interest
in credentials so I merged it. Sadly I'm now noticing that despite my
subject line cleanup I didn't cleanup the "unsued" misspelling, sigh
* tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: constify the 'file' parameter in security_binder_transfer_file()
lsm: constify the 'target' parameter in security_capget()
lsm: add comment block for security_sk_classify_flow LSM hook
security: Fix ret values doc for security_inode_init_security()
cred: remove unsued extern declaration change_create_files_as()
evm: Support multiple LSMs providing an xattr
evm: Align evm_inode_init_security() definition with LSM infrastructure
smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()
security: Allow all LSMs to provide xattrs for inode_init_security hook
lsm: fix typo in security_file_lock() comment header
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
SELinux registers the implementation for the "binder_transfer_file"
hook. Looking at the function implementation we observe that the
parameter "file" is not changing.
Mark the "file" parameter of LSM hook security_binder_transfer_file() as
"const" since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: subject line whitespace fix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.
Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.
cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
security_sk_classify_flow LSM hook has no comment block. Add a comment
block with a brief description of LSM hook and its function parameters.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor double-space fix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit 6bcdfd2cac ("security: Allow all LSMs to provide xattrs for
inode_init_security hook") unified the !initxattrs and initxattrs cases. By
doing that, security_inode_init_security() cannot return -EOPNOTSUPP
anymore, as it is always replaced with zero at the end of the function.
Also, mentioning -ENOMEM as the only possible error is not correct. For
example, evm_inode_init_security() could return -ENOKEY.
Fix these issues in the documentation of security_inode_init_security().
Fixes: 6bcdfd2cac ("security: Allow all LSMs to provide xattrs for inode_init_security hook")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The sk_getsecid hook shouldn't need to modify its socket argument.
Make it const so that callers of security_sk_classify_flow() can use a
const struct sock *.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the evm_inode_init_security() definition to align with the LSM
infrastructure. Keep the existing behavior of including in the HMAC
calculation only the first xattr provided by LSMs.
Changing the evm_inode_init_security() definition requires passing the
xattr array allocated by security_inode_init_security(), and the number of
xattrs filled by previously invoked LSMs.
Use the newly introduced lsm_get_xattr_slot() to position EVM correctly in
the xattrs array, like a regular LSM, and to increment the number of filled
slots. For now, the LSM infrastructure allocates enough xattrs slots to
store the EVM xattr, without using the reservation mechanism.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, the LSM infrastructure supports only one LSM providing an xattr
and EVM calculating the HMAC on that xattr, plus other inode metadata.
Allow all LSMs to provide one or multiple xattrs, by extending the security
blob reservation mechanism. Introduce the new lbs_xattr_count field of the
lsm_blob_sizes structure, so that each LSM can specify how many xattrs it
needs, and the LSM infrastructure knows how many xattr slots it should
allocate.
Modify the inode_init_security hook definition, by passing the full
xattr array allocated in security_inode_init_security(), and the current
number of xattr slots in that array filled by LSMs. The first parameter
would allow EVM to access and calculate the HMAC on xattrs supplied by
other LSMs, the second to not leave gaps in the xattr array, when an LSM
requested but did not provide xattrs (e.g. if it is not initialized).
Introduce lsm_get_xattr_slot(), which LSMs can call as many times as the
number specified in the lbs_xattr_count field of the lsm_blob_sizes
structure. During each call, lsm_get_xattr_slot() increments the number of
filled xattrs, so that at the next invocation it returns the next xattr
slot to fill.
Cleanup security_inode_init_security(). Unify the !initxattrs and
initxattrs case by simply not allocating the new_xattrs array in the
former. Update the documentation to reflect the changes, and fix the
description of the xattr name, as it is not allocated anymore.
Adapt both SELinux and Smack to use the new definition of the
inode_init_security hook, and to call lsm_get_xattr_slot() to obtain and
fill the reserved slots in the xattr array.
Move the xattr->name assignment after the xattr->value one, so that it is
done only in case of successful memory allocation.
Finally, change the default return value of the inode_init_security hook
from zero to -EOPNOTSUPP, so that BPF LSM correctly follows the hook
conventions.
Reported-by: Nicolas Bouchinet <nicolas.bouchinet@clip-os.org>
Link: https://lore.kernel.org/linux-integrity/Y1FTSIo+1x+4X0LS@archlinux/
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: minor comment and variable tweaks, approved by RS]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the description of function definition security_file_lock(),
the line "@cmd: fnctl command" has a typo where "fnctl" should be
"fcntl". This patch fixes the typo.
Signed-off-by: Pairman Guo <pairmanxlr@gmail.com>
[PM: commit message cleanup]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=3nWy
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- A SafeSetID patch to correct what appears to be a cut-n-paste typo in
the code causing a UID to be printed where a GID was desired.
This is coming via the LSM tree because we haven't been able to get a
response from the SafeSetID maintainer (Micah Morton) in several
months. Hopefully we are able to get in touch with Micah, but until
we do I'm going to pick them up in the LSM tree.
- A small fix to the reiserfs LSM xattr code.
We're continuing to work through some issues with the reiserfs code
as we try to fixup the LSM xattr handling, but in the process we're
uncovering some ugly problems in reiserfs and we may just end up
removing the LSM xattr support in reiserfs prior to reiserfs'
removal.
For better or worse, this shouldn't impact any of the reiserfs users,
as we discovered that LSM xattrs on reiserfs were completely broken,
meaning no one is currently using the combo of reiserfs and a file
labeling LSM.
- A tweak to how the cap_user_data_t struct/typedef is declared in the
header file to appease the Sparse gods.
- In the process of trying to sort out the SafeSetID lost-maintainer
problem I realized that I needed to update the labeled networking
entry to "Supported".
- Minor comment/documentation and spelling fixes.
* tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
device_cgroup: Fix kernel-doc warnings in device_cgroup
SafeSetID: fix UID printed instead of GID
MAINTAINERS: move labeled networking to "supported"
capability: erase checker warnings about struct __user_cap_data_struct
lsm: fix a number of misspellings
reiserfs: Initialize sec->length in reiserfs_security_init().
capability: fix kernel-doc warnings in capability.c
A random collection of spelling fixes for source files in the LSM
layer.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
MPTCP can create subflows in kernel context, and later indirectly
expose them to user-space, via the owning MPTCP socket.
As discussed in the reported link, the above causes unexpected failures
for server, MPTCP-enabled applications.
Let's introduce a new LSM hook to allow the security module to relabel
the subflow according to the owning user-space process, via the MPTCP
socket owning the subflow.
Note that the new hook requires both the MPTCP socket and the new
subflow. This could allow future extensions, e.g. explicitly validating
the MPTCP <-> subflow linkage.
Link: https://lore.kernel.org/mptcp/CAHC9VhTNh-YwiyTds=P1e3rixEDqbRTFj22bpya=+qJqfcaMfg@mail.gmail.com/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=JtiD
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM hook comment blocks into security/security.c
For many years the LSM hook comment blocks were located in a very odd
place, include/linux/lsm_hooks.h, where they lived on their own,
disconnected from both the function prototypes and definitions.
In keeping with current kernel conventions, this moves all of these
comment blocks to the top of the function definitions, transforming
them into the kdoc format in the process. This should make it much
easier to maintain these comments, which are the main source of LSM
hook documentation.
For the most part the comment contents were left as-is, although some
glaring errors were corrected. Expect additional edits in the future
as we slowly update and correct the comment blocks.
This is the bulk of the diffstat.
- Introduce LSM_ORDER_LAST
Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
specify LSMs which should be ordered after "normal" LSMs.
This is one of the prerequisites for transitioning IMA/EVM to a
proper LSM.
- Remove the security_old_inode_init_security() hook
The security_old_inode_init_security() LSM hook only allows for a
single xattr which is problematic both for LSM stacking and the
IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
security_inode_init_security() hook and removes the single-xattr LSM
hook.
- Fix a reiserfs problem with security xattrs
During the security_old_inode_init_security() removal work it became
clear that reiserfs wasn't handling security xattrs properly so we
fixed it.
* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
security: Remove security_old_inode_init_security()
ocfs2: Switch to security_inode_init_security()
reiserfs: Switch to security_inode_init_security()
security: Remove integrity from the LSM list in Kconfig
Revert "integrity: double check iint_cache was initialized"
security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
device_cgroup: Fix typo in devcgroup_css_alloc description
lsm: fix a badly named parameter in security_get_getsecurity()
lsm: fix doc warnings in the LSM hook comments
lsm: styling fixes to security/security.c
lsm: move the remaining LSM hook comments to security/security.c
lsm: move the io_uring hook comments to security/security.c
lsm: move the perf hook comments to security/security.c
lsm: move the bpf hook comments to security/security.c
lsm: move the audit hook comments to security/security.c
lsm: move the binder hook comments to security/security.c
lsm: move the sysv hook comments to security/security.c
lsm: move the key hook comments to security/security.c
lsm: move the xfrm hook comments to security/security.c
...
As the remaining two users reiserfs and ocfs2 switched to
security_inode_init_security(), security_old_inode_init_security() can be
now removed.
Out-of-tree kernel modules should switch to security_inode_init_security()
too.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
After working with the larger SELinux-based distros for several
years, we're finally at a place where we can disable the SELinux
runtime disable functionality. The existing kernel deprecation
notice explains the functionality and why we want to remove it:
The selinuxfs "disable" node allows SELinux to be disabled at
runtime prior to a policy being loaded into the kernel. If
disabled via this mechanism, SELinux will remain disabled until
the system is rebooted.
The preferred method of disabling SELinux is via the "selinux=0"
boot parameter, but the selinuxfs "disable" node was created to
make it easier for systems with primitive bootloaders that did not
allow for easy modification of the kernel command line.
Unfortunately, allowing for SELinux to be disabled at runtime makes
it difficult to secure the kernel's LSM hooks using the
"__ro_after_init" feature.
It is that last sentence, mentioning the '__ro_after_init' hardening,
which is the real motivation for this change, and if you look at the
diffstat you'll see that the impact of this patch reaches across all
the different LSMs, helping prevent tampering at the LSM hook level.
From a SELinux perspective, it is important to note that if you
continue to disable SELinux via "/etc/selinux/config" it may appear
that SELinux is disabled, but it is simply in an uninitialized state.
If you load a policy with `load_policy -i`, you will see SELinux
come alive just as if you had loaded the policy during early-boot.
It is also worth noting that the "/sys/fs/selinux/disable" file is
always writable now, regardless of the Kconfig settings, but writing
to the file has no effect on the system, other than to display an
error on the console if a non-zero/true value is written.
Finally, in the several years where we have been working on
deprecating this functionality, there has only been one instance of
someone mentioning any user visible breakage. In this particular
case it was an individual's kernel test system, and the workaround
documented in the deprecation notice ("selinux=0" on the kernel
command line) resolved the issue without problem.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.
Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.
Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.
Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.
Fixes: 79f7865d84 ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
As we were already making massive changes to security/security.c by
moving all of the function header comments above the function
definitions, let's take the opportunity to fix various style crimes.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>