Avoid lingering reset thread on driver shutdown.
If the firmware is down during a shutdown flow
do not initiate the link reset, simply disconnect
all clients and let shutdown flow finish
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
The upper layer may retry call to mei_cl_dma_alloc_and_map(),
in that case the client status may be non-zero after the previous call
and the wait condition will be true immediately.
Set cl->status to zero to allow waiting for an actual result
from the firmware.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211223094705.204624-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose the client dma mapping via mei client bus interface.
The client dma has to be mapped before the device is enabled,
therefore we need to create device linking already during mapping
and we need to unmap after the client is disable hence we need to
postpone the unlink and flush till unmapping or when
destroying the device.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Co-developed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210420172755.12178-1-emmanuel.grumbach@intel.com
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-1-emmanuel.grumbach@intel.com
The mei extension header was build as array of flexible structures
which will not work if actually more headers are added.
(Currently only vtag header was used).
Sparse reports:
drivers/misc/mei/hw.h:253:32: warning: array of flexible structures
Use basic type u8 for the variable sized extension.
Define explicitly mei_ext_hdr_vtag structure.
And also fix mei_ext_next() function to point correctly to the
end of the header.
Note: the headers are part of firmware interface and need to be __packed.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210621193756.134027-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Over time the functions were renamed,
but this was not always reflected in kdoc, fix that.
Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210621193756.134027-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow map and unmap of the client dma buffer only when the client is not
connected. The functions return -EPROTO if the client is already connected.
This is to fix the race when traffic may start or stop when buffer
is not available.
Cc: <stable@vger.kernel.org> #v5.11+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210318055959.305627-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement HBM message protocol to setup and tear down
DMA buffer on behalf of an client. On top there DMA
buffer allocation and its life time management.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210206144325.25682-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce new intermediate state to allow the clients on the bus
to communicate with the firmware from the remove handler.
This is to enable to perform a clean shutdown.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210206144325.25682-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add API to support vtag in communication on mei bus.
Add mei_cldev_send_vtag, mei_cldev_recv_vtag and
mei_cldev_recv_nonblock_vtag functions to allow sending a message
with vtag set and to receive vtag of an incoming message.
Cc: Sean Z Huang <sean.z.huang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201116125612.1660971-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since multiple file pointers (fp) can be associated
with a single host client, upon close() only objects
associated with the fp has to flushed from the tx queues.
The control queues should be flushed only when all
the connections are closed and the client is disconnected.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-9-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vtag map is a list of tuples of vtag and file pointer (struct
mei_cl_vtag) associated with a particular me host client.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-8-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to support vtags we need to access read completed
queue out of driver big lock.
Add a spin lock to protect rd_completed queue.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an extend header beyond existing 4 bytes of the mei message header.
The extension is of variable length, starting with meta header
that contains the number of headers and the overall size of
the extended headers excluding meta header itself followed by
TLV list of extended headers. Currently only supported extension is
the vtag. From the HW perspective the extended headers is already
part of the payload.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow me_cl object to be freed by releasing the reference
that was acquired by one of the search functions:
__mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid()
Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200512223140.32186-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MEI message header provides only 9 bits for storing
the message size, limiting to 511.
In theory the host buffer (hbuf) can contain up to 1020 bytes
(limited by byte = 255 * 4)
With the current hardware and hbuf size 512, this is not a real issue,
but as hardening approach we enforce the limit.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200211160522.7562-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose mei device state to user-space through sysfs.
This gives indication to applications that driver is in transition,
usefully mostly to detect link reset state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use unified version of the copyright notice in the files
Update copyright years according the year the files
were touched, except this patch and SPDX conversions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace boiler plate licenses texts with the SPDX license
identifiers in the mei files header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a little window during disconnection flow
when read cb is moved between lists and may be not freed.
Remove moving read cbs explicitly during flash fixes this memory
leak.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a circular buffer on allocated system memory. Read and write
indices are stored on the control block which is also shared between the
device and the host.
Two new functions are exported from the DMA module: mei_dma_ring_write,
and mei_dma_ring_empty_slots. The former simply copy a packet on the TX
DMA circular buffer and later, returns the number of empty slots on the
TX DMA circular buffer.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement circular buffer protocol over receive dma
buffer. Add extension to the mei message header that holds
length of the buffer on the dma buffer.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The notify set operation ioctl will wait till timeout is expired
even in case when the FW returned an error.
Check the status field of the client object in wait_event_timeout()
to determine if the caller can return earlier.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During queues flush, the me client in most cases is already
unlinked hence the me client id is unavailable. The host client
structure pointer is enough for identification.
The function mei_cl_cmp_id() is dropped as it has no more usage.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KASAN reports a use-after-free during startup, in mei_cl_write:
BUG: KASAN: use-after-free in mei_cl_write+0x601/0x870 [mei]
(drivers/misc/mei/client.c:1770)
This is caused by commit 98e70866aa ("mei: add support for variable
length mei headers."), which changed the return value from len, to
buf->size. That ends up using a stale buf pointer, because blocking
call, the cb (callback) is deleted in me_cl_complete() function.
However, fortunately, len remains unchanged throughout the function
(and I don't see anything else that would require re-reading buf->size
either), so the fix is to simply revert the change, and return len, as
before.
Fixes: 98e70866aa ("mei: add support for variable length mei headers.")
CC: Arnd Bergmann <arnd@arndb.de>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dma_ring bit in the mei message header for conveying
that the message data itself are on the dma ring.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove header size knowledge from me and txe hw layers,
this requires to change the write handler to accept
header and its length as well as data and its length.
HBM messages are fixed to use basic header, hence we add mei_hbm2slots()
that converts HBM message length and mei message header,
while mei_data2slots() converts data length directly to the slots.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wrap the mei header boilerplate initialization code in
mei_msg_hdr_init function. On the way remove 'completed'
field from mei_cl_cb structure as this information
is already included in the header and is local to particular
fragment.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The host buffer depth is hardware specific so it's better to
handle it inside the me and txe hw modules. In me the depth
is read from register in txe it's a constant number.
The value is now retrieved via mei_hbuf_depth accessor,
while it replaces mei_hbuf_max_len.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup conversions between slots and data.
Define MEI_SLOT_SIZE instead of using 4 or sizeof(u32) across
the source code.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ssize_t for rets variables in mei_write(), mei_read(), and
mei_cl_write() as well as change the return type of mei_cl_write()
to ssize_t, to prevent assignment of possible 64bit size_t
to int 32 bit variable.
As by product also eliminate warning
drivers/misc/mei/client.c:1702:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_hbuf_empty_slots() may return with an error in case
of circular buffer overflow. This type of error may
be caused only by a bug. However currently, the error
won't be detected due signed type promotion in comparison to u32.
We add explicit check for less then zero and explicit cast
in comparison to suppress singn-compare warning.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Limit the number of queued writes per client.
Writes above this threshold are blocked till place
in the transmit queue is available.
The limit is configurable via sysfs and defaults to 50.
The implementation should provide blocking I/O behavior.
Prior to this change one would end up in the hands of OOM.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Module reference counting is relevant only to the
mei client devices. Make the implementation clean
and move it to bus.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes regression introduced by
commit 8d52af6795 ("mei: speed up the power down flow")
In mei_cldev_disable during device power down flow, such as
suspend or system power off, it jumps over disconnecting function
to speed up the power down process, however, because the client is
unlinked from the file_list (mei_cl_unlink) mei_cl_set_disconnected
is not called from mei_cl_all_disconnect leaving resource leaking.
The most visible is reference counter on underlying HW module is
not decreased preventing to remove modules after suspend/resume cycles.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Fixes: 8d52af6795 ("mei: speed up the power down flow")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMTHIF has special support in the mei drive, it handles multiplexing
multiple user space connection above single me client connection.
Since there is no additional addressing information there is a strict
requirement on the traffic order on each connection and on the "read
after write" order within the connection. This creates a lot of
complexity mostly because the other client types do not necessarily fall
under the same restriction. After carefully studying the use of the
AMTHIF client, we came to conclusion that the multiplexing is not really
utilized by any application and we may safely remove that support and
significantly simplify the driver.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Specify in function names by which object is the io list filtered:
cl for a client and fp for file descriptor.
In that course a code duplication is resolved by dropping
mei_cl_read_cb_flush and mei_clear_list and using
mei_io_list_free_fp function.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_dev structure used struct mei_cl_cb type variables as for holding
callbacks list heads. Replace them by the actual struct list_head
as there is no other info that is handled. This slims down
the mei_dev structure and mostly streamline the code.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to prevent memory leak clean up the amthif command
queue upon disconnection. The issue may happen only on error path
as the command queue is cleaned upon file descriptor close.
And remove the cleanup from mei_cl_flush_queues as this code
is never reached for amthif client.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On legacy HW, pre Skylake, the notifications are not supported,
return -EOPNOTSUPP in mei_cl_notify_get and prevent
waiting indefinitely.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Request for a notification from a disconnected client will be ignored
silently by the FW but the caller should know that the operation hasn't
succeeded.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hardware module should not be unloaded if the bus
has active devices.
Get get_/put_ bus parent module upon client device
connection/disconnection, to prevent the hardware managing
module to disappear underneath.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_cl_set_disconnected is used only in client.c,
so make it local to the file and mark static.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_io_list_flush is used only in client.c
so make it local to the file and mark static.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The credentials handling was pushed to the write handlers
but error handling wasn't done properly.
Move write callbacks to completion queue to destroy them
and to notify a blocked writer about the failure
Fixes: 136698e535 (mei: push credentials inside the irq write handler)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_autosuspend can take synchronous or asynchronous
paths, Because we are calling pm_runtime_mark_last_busy just before
this most of the cases it takes the asynchronous way. However,
when the FW or driver resets during already running runtime suspend,
the call will result in calling to the driver's rpm callback and results
in a deadlock on device_lock.
The simplest fix is to replace pm_runtime_autosuspend with
asynchronous pm_request_autosuspend.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split callbacks for RX and async notification events on mei bus to
eliminate synchronization problems and to open way for RX optimizations.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
