- Core code:
- Provide a generic wrapper which can be utilized in drivers to handle
the problem of force threaded demultiplex interrupts on RT enabled
kernels. This avoids conditionals and horrible quirks in drivers all
over the place.
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe.
- Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation.
- Make irqchip_init() available for pure ACPI based systems.
- Provide a functional DT binding for the Realtek RTL interrupt chip.
- The usual DT updates and small code improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=2ok5
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
This add ACPI-based generic laptop driver for Loongson-3. Some of the
codes are derived from drivers/platform/x86/thinkpad_acpi.c.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
cros_ec_proto:
* Fix protocol failure if EC firmware jumps to RO part.
cros_typec_switch:
* Add USB Type-C switch driver for mode switches and retimers.
* Integrate to EC for retimers, status update, and mode switches.
* Clean-ups.
cros_ec_typec:
* Clean-ups.
* Use partner PDOs to register USB PD capabilities.
chromeos_laptop:
* Fix a double-free.
cros_ec_chardev:
* Check data length from userland to avoid a memory corruption.
cros_ec:
* Expose suspend_timeout_ms in debugfs.
* Notify the PM about wake events during resume.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCYzut7RMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz011UA/ioEJfKhK0HT4uwe6TfW6hAtmnk4ZipR
Q7dTPH272723AP47SkcfYJK/GxBV9GIxyqOqfnhbFaxWu6fid2a4D8UCAw==
=/Xux
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
* new driver for Microchip PCI1xxxx switch
* heavy refactoring of the Mellanox BlueField driver
* we prefer async probe in the i801 driver now
* the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
-----BEGIN PGP SIGNATURE-----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=arni
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
The for_each_acpi_consumer_dev() takes a reference to the iterator
and if we break a loop we must drop that reference. This usually
happens when error handling is involved. However it's not the case
for skl_int3472_fill_clk_pdata().
Don't leak reference on error by dropping it properly.
Fixes: 43cf36974d ("platform/x86: int3472: Support multiple clock consumers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the `PLATFORM_DEVID_NONE` constant instead of
hard-coding -1 when creating a platform device.
No functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20220930104857.2796923-1-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The idle mask is dumped during the "prepare" and "restore" stage
right now, which helps to demonstrate issues only related to the
first s2idle entry.
If the system has entered s2idle once, but was woken up never
breaking the s2idle loop but also never went back to sleep we
might still have another issue to deal with however.
Move the dynamic debugging message here so that we'll catch it on
each iteration.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216516
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220929215042.745-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge changes regarding the management of ACPI device objects for
6.1-rc1:
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
* acpi-dev:
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
ACPI: property: Use acpi_dev_parent()
ACPI: Drop redundant acpi_dev_parent() header
ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
ACPI: Drop parent field from struct acpi_device
ACPI: scan: Eliminate __acpi_device_add()
ACPI: scan: Rearrange initialization of ACPI device objects
ACPI: scan: Rename acpi_bus_get_parent() and rearrange it
ACPI: Rename acpi_bus_get/put_acpi_device()
Use .dev_groups callback instead of manual sysfs registration.
Remove .probe and .remove callbacks as they become dummy after
using .dev_groups.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220927135612.1602491-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since linux/debugfs.h already has the stubs for the used debugfs
functions when debugfs is not enabled, remove the #ifdef CONFIG_DEBUG_FS
checks.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922175608.630046-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220927004011.1942739-1-keescook@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Declarations for static symbols are useless repetition (unless there are
cyclic dependencies).
By changing the order of a few symbols two forward declarations can be
dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220923094759.87804-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220923063314.239146-1-ye.xingchen@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220923063233.239091-1-ye.xingchen@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Initial version of the PMF ACPI documentation had the concept
of "power_delta" which is removed in the recent revisions.
So the entire cnqf_power_delta structure is never used/updated.
Hence removing it.
Fixes: 1738061c9e ("platform/x86/amd/pmf: Add support for CnQF")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922165118.163165-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It is observed that when thinkpad_acpi driver loads before amd-pmf
driver, thinkpad_acpi driver sends the AMT "on" event and the request
immediately will be part of the PMF BIOS "pending requests".
With the current amd-pmf code, as soon as the amd-pmf driver gets
probed, it calls apmf_acpi_init() where the notify handler will be
installed. Handler callback would call amd_pmf_handle_amt() where the
amd_pmf_set_automode() shall update the auto-mode thermals.
In this case, the auto-mode config_store shall have "zeros", as the
auto mode init gets called during the later stage.
To fix this, change the order of the acpi notifer install and call it
after the auto mode initialization is done.
Fixes: 7d77dcc83a ("platform/x86/amd/pmf: Handle AMT and CQL events for Auto mode")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220923131724.1812685-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the board data describing the regulators for the Microsoft
Surface Go line's IR camera.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, we only support passing a single gpiod_lookup_table as part
of the board data for the tps68470 driver. This carries the implicit
assumption that each TPS68470 device will only support a single
sensor, which does not hold true.
Extend the code to support the possibility of multiple sensors each
having a gpiod_lookup_table, and opportunistically add the lookup
table for the Surface Go line's IR camera.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
At present, the tps68470.c only supports a single clock consumer when
passing platform data to the clock driver. In some devices multiple
sensors depend on the clock provided by a single TPS68470 and so all
need to be able to acquire the clock. Support passing multiple
consumers as platform data.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit b83e2b3067 ("ACPI: scan: Add function to fetch dependent
of ACPI device") we added a means of fetching the first device to
declare itself dependent on another ACPI device in the _DEP method.
One assumption in that patch was that there would only be a single
consuming device, but this has not held.
Replace that function with a new function that fetches the next consumer
of a supplier device. Where no "previous" consumer is passed in, it
behaves identically to the original function.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Whether to turn CnQF on/off by default upon driver load would be decided
by a BIOS flag. Add a sysfs node to provide a way to the user whether to
use static slider or CnQF .
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CnQF (a.k.a Cool and Quiet Framework) extends the static slider concept.
PMF dynamically manages system power limits and fan policy based on system
power trends which is representative of workload trend.
Static slider and CnQF controls are mutually exclusive for system power
budget adjustments. CnQF supports configurable number of modes which can
be unique for AC and DC. Every mode is representative of a system state
characterized by unique steady state and boost behavior.
OEMs can configure the different modes/system states and how the
transition to a mode happens. Whether to have CnQF manage system power
budget dynamically in AC or DC or both is also configurable. Mode changes
due to CnQF don't result in slider position change.
The default OEM values are obtained after evaluating the PMF ACPI function
idx 11 & 12 for AC and DC respectively. Whether to turn ON/OFF by default
is guided by a "flag" passed by the OEM BIOS.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Without CONFIG_DEBUG_FS, the following build error occurs:
drivers/platform/x86/amd/pmc.c:984:17: error: use of undeclared identifier 'pmc_groups'; did you mean 'set_groups'?
.dev_groups = pmc_groups,
^~~~~~~~~~
set_groups
./include/linux/cred.h:65:13: note: 'set_groups' declared here
extern void set_groups(struct cred *, struct group_info *);
^
drivers/platform/x86/amd/pmc.c:984:17: error: incompatible pointer types initializing 'const struct attribute_group **' with an expression of type 'void (struct cred *, struct group_info *)' [-Werror,-Wincompatible-pointer-types]
.dev_groups = pmc_groups,
^~~~~~~~~~
2 errors generated.
pmc_groups was only defined inside a CONFIG_DEBUG_FS block but
commit 7f1ea75d49 ("platform/x86/amd: pmc: Add sysfs files for SMU")
intended for these sysfs files to be available outside of debugfs.
Shuffle the necessary functions out of the CONFIG_DEBUG_FS block so that
the file always builds.
Fixes: 7f1ea75d49 ("platform/x86/amd: pmc: Add sysfs files for SMU")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220922153100.324922-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add scancodes reported by the touchpad on/off button. The actual disabling
and enabling is done in hardware, and this just reports that change to
userspace.
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Link: https://lore.kernel.org/r/20220922115459.6511-1-dhould3@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By swapping the definition of skl_int3472_discrete_remove() and
skl_int3472_discrete_probe() the forward declaration of the former can
be dropped. This is a good thing as it removes code duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220920070101.907596-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
turn_on_panel_on_resume is only used in toshiba_acpi.c now, change it
to static.
Fixes: 3cb1f40dfd ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920084434.3739493-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force
threaded and runs with interrupts enabled. The invocation of
generic_handle_irq() with interrupts enabled triggers a lockdep warning due
to a non-irq safe lock acquisition.
Instead of disabling interrupts on the driver level, use
generic_handle_domain_irq_safe().
[ tglx: Split out from combo patch ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de
Usually it's not necessary to declare static functions if the symbols are
in the right order. Moving the definition of acpi_wmi_driver down in the
compilation unit allows to drop two such declarations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220919122213.852322-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
The previously added patch to add support for pwm change for TUF laptops
also is usuable for more than TUF. The same method `0x00110014` is
used to read the fan RPM.
Add two extra attributes for reading fan2 plus fan2 label.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220916004623.10992-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The CPU/APU SMU FW version and program is currently discoverable by
turning on dynamic debugging or examining debugfs for the amdgpu
driver. To make this more discoverable, create a dedicated sysfs
file for it that userspace can parse without debugging enabled.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220914141850.259-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Error 0x06 (invalid command parameter) is reported by hp-wmi module
when reading the current thermal profile and then proceed to set it
back. The failing condition occurs in Linux NixOS after user
configures the thermal profile to ‘quiet mode’ in Windows. Quiet Fan
Mode is supported in Windows but was not supported in hp-wmi module.
This fix adds support for PLATFORM_PROFILE_QUIET in hp-wmi module for
HP notebooks other than HP Omen series. Quiet thermal profile is not
supported in HP Omen series notebooks.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220912192603.4001-1-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This solves the input device showing up as a virtual device.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220911193106.555938-1-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
cros_ec_handle_event in the cros_ec driver can notify the PM of wake
events. When a device is suspended, cros_ec_handle_event will not check
MKBP events. Instead, received MKBP events are checked during resume by
cros_ec_report_events_during_suspend. But
cros_ec_report_events_during_suspend cannot notify the PM if received
events are wake events, causing wake events to not be reported if
received while the device is suspended.
Update cros_ec_report_events_during_suspend to notify the PM of wake
events during resume by calling pm_wakeup_event.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220913204954.2931042-1-jthies@google.com
Some Toshibas have a broken acpi-video interface for brightness control, so
far these have been using a special workaround in drivers/acpi/acpi_video.c
which gets activated by the disable_backlight_sysfs_if module-param/quirks.
The recent x86/acpi backlight refactoring has broken this workaround:
1. This workaround relies on acpi_video_get_backlight_type() returning
acpi_video so that the acpi_video code actually runs; and
2. this relies on the actual native GPU driver to offer the sysfs
backlight interface to userspace.
After the refactor this breaks since the native driver will no
longer register its backlight-device if acpi_video_get_backlight_type()
does not return native and making it return native breaks 1.
Keeping the acpi_video backlight handling on resume active, while not
using it to set the brightness, is necessary because it does a _BCM
call on resume which is necessary to turn the panel back on on resume.
Looking at the DSDT shows that this _BCM call results in a Toshiba
HCI_SET HCI_LCD_BRIGHTNESS call, which turns the panel back on.
This commit makes toshiba_acpi do a HCI_SET HCI_PANEL_POWER_ON call
on resume on the affected models, so that the (now broken)
acpi_video disable_backlight_sysfs_if workaround will no longer
be necessary.
Note this uses HCI_PANEL_POWER_ON instead of HCI_LCD_BRIGHTNESS
to avoid changing the configured brightness level.
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds the ACPI battery hook which in turns adds the sysfs
entries.
Because the Toshiba laptops only support two modes (eco or normal), which
in testing correspond to 80% and 100% we simply round to the nearest
possible level when set.
It is possible that Toshiba laptops other than the Z830 has different set
points for the charging. If so, a quirk table could be introduced in the
future for this. For now, assume that all laptops that support this feature
work the same way.
Tested on a Toshiba Satellite Z830.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902180037.1728546-3-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit adds the internal functions to control the Toshiba laptop.
Unlike for example ThinkPads where this control is granular here it is
just off/on. When off it charges to 100%. When on it charges to about 80%.
Controlling this setting is done via HCI register 0x00ba. Setting to value
1 will result in limiting the charing to 80% of the battery capacity,
while setting it to 0 will allow charging to 100%.
Reading the current state is a bit weird, and needs a 1 set in the last
position of the query for whatever reason. In addition, the read may
return 0x8d20 (Data not available) rarely, so a retry mechanism is needed.
According to the Windows program used to control the feature the setting
will not take effect until the battery has been discharged to around 50%.
However, in my testing it takes effect as soon as the charge drops below
80%. On Windows Toshiba branded this feature as "Eco charging".
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902180037.1728546-2-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This expands on the previous commit, exporting the fan RPM via hwmon.
This will look something like the following when using the "sensors"
command from lm_sensors:
toshiba_acpi_sensors-acpi-0
Adapter: ACPI interface
fan1: 0 RPM
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220902174018.1720029-3-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This add the internal feature detection and reading function for fan RPM.
The approach is based on tracing ACPI calls using AMLI (a tracer/debugger
built into ACPI.sys) while using the Windows cooling self-test software.
The call used is {HCI_GET, 0x45, 0, 1, 0, 0} which returns:
{0x0, 0x45, fan_rpm, probably_max_rpm, 0x0, 0x0}
What is probably the max RPM is not currently used.
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902174018.1720029-2-lkml@vorpal.se
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The `check` callback is run right before the cores are put into HLT.
This will allow checking synchronization problems with other software
that writes into the STB.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-5-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The kernel parameter `enable_stb` currently gates the access to the STB
from debugfs and also controls whether the kernel writes events to the
STB.
Even if not accessing STB data from the kernel it's useful to have this
data stored to review the STB. So in suspend/resume always write it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-4-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently `amd-pmc` has two events, but just adds one to the first to
distinguish the second. Add a clear definition what these events mean.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829162953.5947-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
