To make the code easier to follow,
use an explicit find_active_resync_extent(),
and add a "nonblock" parameter to _al_get().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation to be able to defer requests that need to wait
for an activity log transaction to a submitter workqueue.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A request hitting an already "hot" extent should proceed right away,
even if some other requests need to wait for pending transactions.
Without that short-circuit, several simultaneous make_request contexts
race for committing the transaction, possibly penalizing the innocent.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We used to calculate all on-disk meta data offsets, and then compare
the stored offsets, basically treating them as magic numbers.
Now with the activity log striping, the activity log size is no longer
fixed. We need to first read the super block, then base the activity
log and bitmap offsets on the stored offsets/al stripe settings.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make it obvious that this value is in units of 512 Byte sectors.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we have the cached meta_dev_idx member,
we can get rid of a few rcu_read_lock() sections and rcu_dereference().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce two new on-disk meta data fields: al_stripes and al_stripe_size_4k
The intended use case is activity log on RAID 0 or similar.
Logically consecutive transactions will advance their on-disk position
by al_stripe_size_4k 4kB (transaction sized) blocks.
Right now, these are still asserted to be the backward compatible
values al_stripes = 1, al_stripe_size_4k = 8 (which amounts to 32kB).
Also introduce a caching member for meta_dev_idx in the in-core
structure: even though it is initially passed in in the rcu-protected
disk_conf structure, it cannot change without a detach/attach cycle.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a comment about our meta data layout variants,
and rename a few defines (e.g. MD_RESERVED_SECT -> MD_128MB_SECT)
to make it clear that they are short hand for fixed constants,
and not arbitrarily to be redefined as one may see fit.
Properly pad struct meta_data_on_disk to 4kB,
and initialize to zero not only the first 512 Byte,
but all of it in drbd_md_sync().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes ASSERT( mdev->state.disk == D_FAILED ) in drivers/block/drbd/drbd_main.c
When we detach from local disk, we let the local refcount hit zero twice.
First, we transition to D_FAILED, so we won't give out new references
to incoming requests; we still may give out *internal* references, though.
Once the refcount hits zero [1] while in D_FAILED, we queue a transition
to D_DISKLESS to our worker. We need to queue it, because we may be in
atomic context when putting the reference.
Once the transition to D_DISKLESS actually happened [2] from worker context,
we don't give out new internal references either.
Between hitting zero the first time [1] and actually transition to
D_DISKLESS [2], there may be a few very short lived internal get/put,
so we may hit zero more than once while being in D_FAILED, or even see a
race where a an internal get_ldev() happened while D_FAILED, but the
corresponding put_ldev() happens just after the transition to D_DISKLESS.
That's why we have the additional test_and_set_bit(GO_DISKLESS,);
and that's why the assert was placed wrong.
Since there was exactly one code path left to drbd_go_diskless(),
and that checks already for D_FAILED, drop that assert,
and fold in the drbd_queue_work().
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull Ceph updates from Sage Weil:
"A few groups of patches here. Alex has been hard at work improving
the RBD code, layout groundwork for understanding the new formats and
doing layering. Most of the infrastructure is now in place for the
final bits that will come with the next window.
There are a few changes to the data layout. Jim Schutt's patch fixes
some non-ideal CRUSH behavior, and a set of patches from me updates
the client to speak a newer version of the protocol and implement an
improved hashing strategy across storage nodes (when the server side
supports it too).
A pair of patches from Sam Lang fix the atomicity of open+create
operations. Several patches from Yan, Zheng fix various mds/client
issues that turned up during multi-mds torture tests.
A final set of patches expose file layouts via virtual xattrs, and
allow the policies to be set on directories via xattrs as well
(avoiding the awkward ioctl interface and providing a consistent
interface for both kernel mount and ceph-fuse users)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
libceph: add support for HASHPSPOOL pool flag
libceph: update osd request/reply encoding
libceph: calculate placement based on the internal data types
ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
ceph: update "ceph_features.h"
libceph: decode into cpu-native ceph_pg type
libceph: rename ceph_pg -> ceph_pg_v1
rbd: pass length, not op for osd completions
rbd: move rbd_osd_trivial_callback()
libceph: use a do..while loop in con_work()
libceph: use a flag to indicate a fault has occurred
libceph: separate non-locked fault handling
libceph: encapsulate connection backoff
libceph: eliminate sparse warnings
ceph: eliminate sparse warnings in fs code
rbd: eliminate sparse warnings
libceph: define connection flag helpers
rbd: normalize dout() calls
rbd: barriers are hard
rbd: ignore zero-length requests
...
Pull block driver bits from Jens Axboe:
"After the block IO core bits are in, please grab the driver updates
from below as well. It contains:
- Fix ancient regression in dac960. Nobody must be using that
anymore...
- Some good fixes from Guo Ghao for loop, fixing both potential
oopses and deadlocks.
- Improve mtip32xx for NUMA systems, by being a bit more clever in
distributing work.
- Add IBM RamSan 70/80 driver. A second round of fixes for that is
pending, that will come in through for-linus during the 3.9 cycle
as per usual.
- A few xen-blk{back,front} fixes from Konrad and Roger.
- Other minor fixes and improvements."
* 'for-3.9/drivers' of git://git.kernel.dk/linux-block:
loopdev: ignore negative offset when calculate loop device size
loopdev: remove an user triggerable oops
loopdev: move common code into loop_figure_size()
loopdev: update block device size in loop_set_status()
loopdev: fix a deadlock
xen-blkback: use balloon pages for persistent grants
xen-blkfront: drop the use of llist_for_each_entry_safe
xen/blkback: Don't trust the handle from the frontend.
xen-blkback: do not leak mode property
block: IBM RamSan 70/80 driver fixes
rsxx: add slab.h include to dma.c
drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency
block: remove new __devinit/exit annotations on ramsam driver
block: IBM RamSan 70/80 device driver
drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static?
drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static?
dac960: return success instead of -ENOTTY
mtip32xx: add trim support
mtip32xx: Add workqueue and NUMA support
block: delete super ancient PC-XT driver for 1980's hardware
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
I just fixed this in "drivers/block/rbd.c" and I noticed that
"drivers/block/nbd.c" has the same problem. Fix a warning issued by
sparse by adding some lockdep annotations to indicate the queue lock gets
dropped (because it's held when do_nbd_request() is called) and
re-acquired within the function.
Signed-off-by: Alex Elder <elder@inktank.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Paul Clements <paul.clements@us.sios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass the read-only flag to set_device_ro, so that it will be visible to
the block layer and in sysfs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two problems with shutdown in the NBD driver.
1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem.
This patch adds the sync operation into __nbd_ioctl()'s
NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted
to processes that have CAP_SYS_ADMIN, and the NBD client may not
possess it (fsync of the block device does not sync the filesystem,
either).
2: Once we clear the socket we have no guarantee that later reads will
come from the same backing storage.
The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket
clearing code so the page cache is cleaned, lest reads that hit on the
page cache will return stale data from the previously-accessible disk.
Example:
# qemu-nbd -r -c/dev/nbd0 /dev/sr0
# file -s /dev/nbd0
/dev/stdin: # UDF filesystem data (version 1.5) etc.
# qemu-nbd -d /dev/nbd0
# qemu-nbd -r -c/dev/nbd0 /dev/sda
# file -s /dev/nbd0
/dev/stdin: # UDF filesystem data (version 1.5) etc.
While /dev/sda has:
# file -s /dev/sda
/dev/sda: x86 boot sector; etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paul Clements <Paul.Clements@steeleye.com>
Cc: Alex Bligh <alex@alex.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the NBD device does not accept flush requests from the Linux
block layer. If the NBD server opened the target with neither O_SYNC nor
O_DSYNC, however, the device will be effectively backed by a writeback
cache. Without issuing flushes properly, operation of the NBD device will
not be safe against power losses.
The NBD protocol has support for both a cache flush command and a FUA
command flag; the server will also pass a flag to note its support for
these features. This patch adds support for the cache flush command and
flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl,
and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the
flag is active the block layer will send REQ_FLUSH requests, which we
translate to NBD_CMD_FLUSH commands.
FUA support is not included in this patch because all free software
servers implement it with a full fdatasync; thus it has no advantage over
supporting flush only. Because I [Paolo] cannot really benchmark it in a
realistic scenario, I cannot tell if it is a good idea or not. It is also
not clear if it is valid for an NBD server to support FUA but not flush.
The Linux block layer gives a warning for this combination, the NBD
protocol documentation says nothing about it.
The patch also fixes a small problem in the handling of flags: nbd->flags
must be cleared at the end of NBD_DO_IT, but the driver was not doing
that. The bug manifests itself as follows. Suppose you two different
client/server pairs to start the NBD device. Suppose also that the first
client supports NBD_SET_FLAGS, and the first server sends
NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two
things. Before this patch, the second invocation of NBD_DO_IT will use a
stale value of nbd->flags, and the second server will issue an error every
time it receives an NBD_CMD_FLUSH command.
This bug is pre-existing, but it becomes much more important after this
patch; flush failures make the device pretty much unusable, unlike
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Acked-by: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated. Drop its usage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Use the new version of the encoding for osd requests and replies. In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request. Update the rbd and fs/ceph users
appropriately.
The main changes are:
- we keep pointers into the request memory for fields we need to update
each time the request is sent out over the wire
- we keep information about the result in an array in the request struct
where the users can easily get at it.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
The only thing type-specific osd completion functions do with their
osd op parameter is (in some cases) extract the number of bytes
transferred from it. In the other cases, the xferred bytes field
is not used, and total message data transfer byte count (which may
well be zero) is used.
Just set the object request transfer count in the main osd request
callback function and provide that to the other routines. There is
then no longer any need to pass the op pointer to the type-specific
completion routines, so drop those parameters.
Stop doing anything with the total message data length.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
This function is slightly out of place, probably the result
of an errant automatic merge or something.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Fengguang Wu reminded me that there were outstanding sparse reports
in the ceph and rbd code. This patch fixes these problems in rbd
that lead to those reports:
- Convert functions that are never referenced externally to have
static scope.
- Add a lockdep annotation to rbd_request_fn(), because it
releases a lock before acquiring it again.
This partially resolves:
http://tracker.ceph.com/issues/4184
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add dout() calls to facilitate tracing of image and object requests.
Change a few existing calls so they use __func__ rather than the
hard-coded function name. Have calls always add ":" after the name
of the function, and prefix pointer values with a consistent tag
indicating what it represents. (Note that there remain some older
dout() calls that are left untouched by this patch.)
Issue a warning if rbd_osd_write_callback() ever gets a short write.
This resolves:
http://tracker.ceph.com/issues/4235
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Let's go shopping!
I'm afraid this may not have gotten it right:
07741308 rbd: add barriers near done flag operations
The smp_wmb() should have been done *before* setting the done flag,
to ensure all other data was valid before marking the object request
done.
Switch to use atomic_inc_return() here to set the done flag, which
allows us to verify we don't mark something done more than once.
Doing this also implies general barriers before and after the call.
And although a read memory barrier might have been sufficient before
reading the done flag, convert this to a full memory barrier just
to put this issue to bed.
This resolves:
http://tracker.ceph.com/issues/4238
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The old request code simply ignored zero-length requests. We should
still operate that same way to avoid any changes in behavior. We
can implement handling for special zero-length requests separately
(see http://tracker.ceph.com/issues/4236).
Add some assertions based on this new constraint.
This resolves:
http://tracker.ceph.com/issues/4237
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Negative offset may cause loop device size larger than backing file
size.
$ fallocate -l 1M a
$ losetup --offset 0xffffffffffff0000 /dev/loop0 a
$ blockdev --getsize64 /dev/loop0
1114112
$ ls -l a
-rw-r--r-- 1 root root 1048576 Jan 23 12:46 a
$ cat /dev/loop0
cat: /dev/loop0: Input/output error
It makes no sense to do that. Only apply offset when it's positive.
Fix a typo in the comment by the way.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When loopdev is built as module and we pass an invalid parameter,
loop_init() will return directly without deregister misc device, which
will cause an oops when insert loop module next time because we left some
garbage in the misc device list.
Test case:
sudo modprobe loop max_part=1024
(failed due to invalid parameter)
sudo modprobe loop
(oops)
Clean up nicely to avoid such oops.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update block device size in accord with gendisk size and let userspace
know the change in loop_figure_size(). This is a clean up to remove
common code of loop_figure_size()'s two callers.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Loop device driver sometimes fails to impose the size limit on the
device. Keep issuing following two commands:
losetup --offset 7517244416 --sizelimit 3224971264 /dev/loop0 backed_file
blockdev --getsize64 /dev/loop0
blockdev reports file size instead of sizelimit several out of 100 times.
The problems are:
- losetup set up the device in two ioctl:
LOOP_SET_FD and LOOP_SET_STATUS64.
- LOOP_SET_STATUS64 only update size of gendisk.
Block device size will be updated lazily when device comes to use. If udev
rushes in between the two ioctl, it will bring in a block device whose
size is backing file size. If the device is not released after
LOOP_SET_STATUS64 ioctl, blockdev will not see the updated size.
Update block size in LOOP_SET_STATUS64 ioctl.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Reported-by: M. Hindess <hindessm@uk.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bd_mutex and lo_ctl_mutex can be held in different order.
Path #1:
blkdev_open
blkdev_get
__blkdev_get (hold bd_mutex)
lo_open (hold lo_ctl_mutex)
Path #2:
blkdev_ioctl
lo_ioctl (hold lo_ctl_mutex)
lo_set_capacity (hold bd_mutex)
Lockdep does not report it, because path #2 actually holds a subclass of
lo_ctl_mutex. This subclass seems creep into the code by mistake. The
patch author actually just mentioned it in the changelog, see commit
f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see:
http://marc.info/?l=linux-kernel&m=123806169129727&w=2
Path #2 hold bd_mutex to call bd_set_size(), I've protected it
with i_mutex in a previous patch, so drop bd_mutex at this site.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The use of pointer fs should be after the null check.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
Konrad writes:
Please git pull the following branch:
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git stable/for-jens-3.9
which has bug-fixes that did not make it in v3.8. They all are marked as
material for the stable tree as well. There are two bug-fixes for
the code that has been in there for some time (that is the Jan's fix
and one of mine). And there are two bug-fixes for the persistent grant
feature that debuted in v3.8 for xen blk[back|front]end.
The return values provided for ceph_copy_to_page_vector() and
ceph_copy_from_page_vector() serve no purpose, so get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The result of ceph_copy_from_page_vector() is simply the length
argument it is provided.
This is called by rbd_obj_method_sync(), which returns the result if
it's non-negative. But we always either ignore or overwrite that
return value. So explicitly ignore what's returned by the copy
function, and have rbd_obj_method_sync() always return either a
negative errno or 0.
We also return the result of ceph_copy_from_page_vector() in
rbd_obj_read_sync(). There we still want to return the number of
bytes transferred, but we can use the value we already have in hand
rather than what ceph_copy_from_page_vector() provides.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_obj_read_sync(), verify the number of bytes transferred won't
exceed what can be represented by a size_t before using it to
indicate the number of bytes to copy to the result buffer.
(The real motivation for this is to prepare for the next patch.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add support for CEPH_OSD_OP_STAT operations in the osd client
and in rbd.
This operation sends no data to the osd; everything required is
encoded in identity of the target object.
The result will be ENOENT if the object doesn't exist. If it does
exist and no other error occurs the server returns the size and last
modification time of the target object as output data (in little
endian format). The size is a 64 bit unsigned and the time is
ceph_timespec structure (two unsigned 32-bit integers, representing
a seconds and nanoseconds value).
This resolves:
http://tracker.ceph.com/issues/4007
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The for_each_obj_request*() macros should parenthesize their uses of
the ireq parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
With current persistent grants implementation we are not freeing the
persistent grants after we disconnect the device. Since grant map
operations change the mfn of the allocated page, and we can no longer
pass it to __free_page without setting the mfn to a sane value, use
balloon grant pages instead, as the gntdev device does.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Replace llist_for_each_entry_safe with a while loop.
llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best
to remove it and use a while loop and do the deletion manually.
Specifically this bug can be triggered by hot-unplugging a disk, either
by doing xm block-detach or by save/restore cycle.
BUG: unable to handle kernel paging request at fffffffffffffff0
IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront]
The crash call trace is:
...
bad_area_nosemaphore+0x13/0x20
do_page_fault+0x25e/0x4b0
page_fault+0x25/0x30
? blkif_free+0x63/0x130 [xen_blkfront]
blkfront_resume+0x46/0xa0 [xen_blkfront]
xenbus_dev_resume+0x6c/0x140
pm_op+0x192/0x1b0
device_resume+0x82/0x1e0
dpm_resume+0xc9/0x1a0
dpm_resume_end+0x15/0x30
do_suspend+0x117/0x1e0
When drilling down to the assembler code, on newer GCC it does
.L29:
cmpq $-16, %r12 #, persistent_gnt check
je .L30 #, out of the loop
.L25:
... code in the loop
testq %r13, %r13 # n
je .L29 #, back to the top of the loop
cmpq $-16, %r12 #, persistent_gnt check
movq 16(%r12), %r13 # <variable>.node.next, n
jne .L25 #, back to the top of the loop
.L30:
While on GCC 4.1, it is:
L78:
... code in the loop
testq %r13, %r13 # n
je .L78 #, back to the top of the loop
movq 16(%rbx), %r13 # <variable>.node.next, n
jmp .L78 #, back to the top of the loop
Which basically means that the exit loop condition instead of
being:
&(pos)->member != NULL;
is:
;
which makes the loop unbound.
Since xen-blkfront is the only user of the llist_for_each_entry_safe
macro remove it from llist.h.
Orabug: 16263164
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
