We now ONLY call io_msg_alloc_async() from inside prep handling, which
is always locked. No need for this helper anymore, or the check in
io_msg_alloc_async() on whether the ring is locked or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the io_async_msghdr out of the issue path and into prep handling,
e it's now done unconditionally and hence does not need to be part
of the issue path. This means any usage of io_sendrecv_prep_async() and
io_sendmsg_prep_async(), and hence the forced async setup path is now
unified with the normal prep setup.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the io_async_msghdr out of the issue path and into prep handling,
since it's now done unconditionally and hence does not need to be part
of the issue path. This reduces the footprint of the multishot fast
path of multiple invocations of ->issue() per prep, and also means that
using ->prep_async() can be dropped for recvmsg asthis is now done via
setup on the prep side.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently set this separately for async/sync entry, but let's just
move it to a generic pre-issue spot and eliminate the difference
between the two.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use an on-stack one and then need to allocate and copy if
async execution is required, always grab one upfront. This should be
very cheap, and potentially even have cache hotness benefits for
back-to-back send/recv requests.
For any recv type of request, this is probably a good choice in general,
as it's expected that no data is available initially. For send this is
not necessarily the case, as space in the socket buffer is expected to
be available. However, getting a cached io_async_msghdr is very cheap,
and as it should be cache hot, probably the difference here is neglible,
if any.
A nice side benefit is that io_setup_async_msg can get killed
completely, which has some nasty iovec manipulation code.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for carrying
more state than what is available now, if necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for carrying
more state then what is being done now, if necessary. While unifying
some of this code, add a generic send setup prep handler that they can
both use.
This gets rid of some manual msghdr and sockaddr on the stack, and makes
it look a bit more like the sendmsg/recvmsg variants. Going forward, more
can get unified on top.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In practice, we just need to recycle a few elements for (by far) most
use cases. Shrink the total size down from 512 to 128, which should be
more than plenty.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For historical reasons these were special cased, as they were the only
ones that needed cancelation. But now we handle cancelations generally,
and hence there's no need to check for these in
io_ring_ctx_wait_and_kill() when io_uring_try_cancel_requests() handles
both these and the rest as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_req_complete_post() to push all IORING_SETUP_IOPOLL requests
to task_work, it's much cleaner and should normally happen. We couldn't
do it before because there was a possibility of looping in
complete_post() -> tw -> complete_post() -> ...
Also, unexport the function and inline __io_req_complete_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/ea19c032ace3e0dd96ac4d991a063b0188037014.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task_work execution is now always locked, and we shouldn't get into
io_req_complete_post() from them. That means that complete_post() is
always called out of the original task context and we don't even need to
check current.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/24ec27f27db0d8f58c974d8118dca1d345314ddc.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_post_aux_cqe(), which is used for multishot requests, delays
completions by putting CQEs into a temporary array for the purpose
completion lock/flush batching.
DEFER_TASKRUN doesn't need any locking, so for it we can put completions
directly into the CQ and defer post completion handling with a flag.
That leaves !DEFER_TASKRUN, which is not that interesting / hot for
multishot requests, so have conditional locking with deferred flush
for them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/b1d05a81fd27aaa2a07f9860af13059e7ad7a890.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction on multishot execution context disallowing io-wq is
driven by rules of io_fill_cqe_req_aux(), it should only be called in
the master task context, either from the syscall path or in task_work.
Since task_work now always takes the ctx lock implying
IO_URING_F_COMPLETE_DEFER, we can just assume that the function is
always called with its defer argument set to true.
Kill the argument. Also rename the function for more consistency as
"fill" in CQE related functions was usually meant for raw interfaces
only copying data into the CQ without any locking, waking the user
and other accounting "post" functions take care of.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/93423d106c33116c7d06bf277f651aa68b427328.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ctx is always locked for task_work now, so get rid of struct
io_tw_state::locked. Note I'm stopping one step before removing
io_tw_state altogether, which is not empty, because it still serves the
purpose of indicating which function is a tw callback and forcing users
not to invoke them carelessly out of a wrong context. The removal can
always be done later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/e95e1ea116d0bfa54b656076e6a977bc221392a4.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can run normal task_work without locking the ctx, however we try to
lock anyway and most handlers prefer or require it locked. It might have
been interesting to multi-submitter ring with high contention completing
async read/write requests via task_work, however that will still need to
go through io_req_complete_post() and potentially take the lock for
rsrc node putting or some other case.
In other words, it's hard to care about it, so alawys force the locking.
The case described would also because of various io_uring caches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/6ae858f2ef562e6ed9f13c60978c0d48926954ba.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kiocb_done() should care to specifically redirecting requests to io-wq.
Remove the hopping to tw to then queue an io-wq, return -EAGAIN and let
the core code io_uring handle offloading.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/413564e550fe23744a970e1783dfa566291b0e6f.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
!IO_URING_F_UNLOCKED does not translate to availability of the deferred
completion infra, IO_URING_F_COMPLETE_DEFER does, that what we should
pass and look for to use io_req_complete_defer() and other variants.
Luckily, it's not a real problem as two wrongs actually made it right,
at least as far as io_uring_cmd_work() goes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/aef76d34fe9410df8ecc42a14544fd76cd9d8b9e.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring cmd converts struct io_tw_state to issue_flags and later back
to io_tw_state, it's awfully ill-fated, not to mention that intermediate
issue_flags state is not correct.
Get rid of the last conversion, drag through tw everything that came
with IO_URING_F_UNLOCKED, and replace io_req_complete_defer() with a
direct call to io_req_complete_defer(), at least for the time being.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/c53fa3df749752bd058cf6f824a90704822d6bcc.1710799188.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bunch of flags that are purely based on what the file
operations support while also never being conditionally set or unset.
IOW, they're not subject to change for individual files. Imho, such
flags don't need to live in f_mode they might as well live in the fops
structs itself. And the fops struct already has that lonely
mmap_supported_flags member. We might as well turn that into a generic
fop_flags member and move a few flags from FMODE_* space into FOP_*
space. That gets us four FMODE_* bits back and the ability for new
static flags that are about file ops to not have to live in FMODE_*
space but in their own FOP_* space. It's not the most beautiful thing
ever but it gets the job done. Yes, there'll be an additional pointer
chase but hopefully that won't matter for these flags.
I suspect there's a few more we can move into there and that we can also
redirect a bunch of new flag suggestions that follow this pattern into
the fop_flags field instead of f_mode.
Link: https://lore.kernel.org/r/20240328-gewendet-spargel-aa60a030ef74@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This bug was introduced in commit 950e79dd73 ("io_uring: minor
io_cqring_wait() optimization"), which was made in preparation for
adc8682ec6 ("io_uring: Add support for napi_busy_poll"). The latter
got reverted in cb31821673 ("Revert "io_uring: Add support for
napi_busy_poll""), so simply undo the former as well.
Cc: stable@vger.kernel.org
Fixes: 950e79dd73 ("io_uring: minor io_cqring_wait() optimization")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Link: https://lore.kernel.org/r/20240405125551.237142-1-izbyshev@ispras.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we look up the kbuf, ensure that it doesn't get unregistered until
after we're done with it. Since we're inside mmap, we cannot safely use
the io_uring lock. Rely on the fact that we can lookup the buffer list
under RCU now and grab a reference to it, preventing it from being
unregistered until we're done with it. The lookup returns the
io_buffer_list directly with it referenced.
Cc: stable@vger.kernel.org # v6.4+
Fixes: 5cf4f52e6d ("io_uring: free io_buffer_list entries via RCU")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for being able
to keep the buffer list alive outside of the ctx->uring_lock.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that xarray is being exclusively used for the buffer_list lookup,
this check is no longer needed. Get rid of it and the is_ready member.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just rely on the xarray for any kind of bgid. This simplifies things, and
it really doesn't bring us much, if anything.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use the system unbound event workqueue, use an io_uring
specific one. This avoids dependencies with the tty, which also uses
the system_unbound_wq, and issues flushes of said workqueue from inside
its poll handling.
Cc: stable@vger.kernel.org
Reported-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Iskren Chernev <me@iskren.info>
Link: https://github.com/axboe/liburing/issues/1113
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do the same check for direct io-wq execution for multishot requests that
commit 2a975d426c did for the inline execution, and disable multishot
mode (and revert to single shot) if the file type doesn't support NOWAIT,
and isn't opened in O_NONBLOCK mode. For multishot to work properly, it's
a requirement that nonblocking read attempts can be done.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Supporting multishot reads requires support for NOWAIT, as the
alternative would be always having io-wq execute the work item whenever
the poll readiness triggered. Any fast file type will have NOWAIT
support (eg it understands both O_NONBLOCK and IOCB_NOWAIT). If the
given file type does not, then simply resort to single shot execution.
Cc: stable@vger.kernel.org
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ideally we'd want to simply kill the task rather than wake it, but for
now let's just add a startup check that causes the thread to exit.
This can only happen if io_uring_alloc_task_context() fails, which
generally requires fault injection.
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.
Reported-and-tested-by: syzbot+f8e9a371388aa62ecab4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we get a request with IOSQE_ASYNC set, then we first run the prep
async handlers. But if we then fail setting it up and want to post
a CQE with -EINVAL, we use ->done_io. This was previously guarded with
REQ_F_PARTIAL_IO, and the normal setup handlers do set it up before any
potential errors, but we need to cover the async setup too.
Fixes: 9817ad8589 ("io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We know the request is either being removed, or already in the process of
being removed through task_work, so we can delete it from our waitid list
upfront. This is important for remove all conditions, as we otherwise
will find it multiple times and prevent cancelation progress.
Remove the dead check in cancelation as well for the hash_node being
empty or not. We already have a waitid reference check for ownership,
so we don't need to check the list too.
Cc: stable@vger.kernel.org
Fixes: f31ecf671d ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We know the request is either being removed, or already in the process of
being removed through task_work, so we can delete it from our futex list
upfront. This is important for remove all conditions, as we otherwise
will find it multiple times and prevent cancelation progress.
Cc: stable@vger.kernel.org
Fixes: 194bb58c60 ("io_uring: add support for futex wake and wait")
Fixes: 8f350194d5 ("io_uring: add support for vectored futex waits")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Taking the ctx lock is not enough to use the deferred request completion
infrastructure, it'll get queued into the list but no one would expect
it there, so it will sit there until next io_submit_flush_completions().
It's hard to care about the cancellation path, so complete it via tw.
Fixes: ef7dfac51d ("io_uring/poll: serialize poll linked timer start with poll removal")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c446740bc16858f8a2a8dcdce899812f21d15f23.1710514702.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Looking at the error path of __io_uaddr_map, if we fail after pinning
the pages for any reasons, ret will be set to -EINVAL and the error
handler won't properly release the pinned pages.
I didn't manage to trigger it without forcing a failure, but it can
happen in real life when memory is heavily fragmented.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Fixes: 223ef47431 ("io_uring: don't allow IORING_SETUP_NO_MMAP rings on highmem pages")
Link: https://lore.kernel.org/r/20240313213912.1920-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In buffer lists we have ->is_mapped as well as ->is_mmap, it's
pretty hard to stay sane double checking which one means what,
and in the long run there is a high chance of an eventual bug.
Rename ->is_mapped into ->is_buf_ring.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c4838f4d8ad506ad6373f1c305aee2d2c1a89786.1710343154.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We make a few cancellation judgements based on ctx->rings, so let's
zero it afer deallocation for IORING_SETUP_NO_MMAP just like it's
done with the mmap case. Likely, it's not a real problem, but zeroing
is safer and better tested.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9ff6cdf91429b8a51699c210e1f6af6ea3f8bdcf.1710255382.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If read multishot is being invoked from the poll retry handler, then we
should return IOU_ISSUE_SKIP_COMPLETE rather than -EAGAIN. If not, then
a CQE will be posted with -EAGAIN rather than triggering the retry when
the file is flagged as readable again.
Cc: stable@vger.kernel.org
Reported-by: Sargun Dhillon <sargun@meta.com>
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This kind of state is per-syscall, and since we're doing the waiting off
entering the io_uring_enter(2) syscall, there's no way that iowait can
already be set for this case. Simplify it by setting it if we need to,
and always clearing it to 0 when done.
Fixes: 7b72d661f1 ("io_uring: gate iowait schedule on having pending requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Hy//
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Make running of task_work internal loops more fair, and unify how the
different methods deal with them (me)
- Support for per-ring NAPI. The two minor networking patches are in a
shared branch with netdev (Stefan)
- Add support for truncate (Tony)
- Export SQPOLL utilization stats (Xiaobing)
- Multishot fixes (Pavel)
- Fix for a race in manipulating the request flags via poll (Pavel)
- Cleanup the multishot checking by making it generic, moving it out of
opcode handlers (Pavel)
- Various tweaks and cleanups (me, Kunwu, Alexander)
* tag 'for-6.9/io_uring-20240310' of git://git.kernel.dk/linux: (53 commits)
io_uring: Fix sqpoll utilization check racing with dying sqpoll
io_uring/net: dedup io_recv_finish req completion
io_uring: refactor DEFER_TASKRUN multishot checks
io_uring: fix mshot io-wq checks
io_uring/net: add io_req_msg_cleanup() helper
io_uring/net: simplify msghd->msg_inq checking
io_uring/kbuf: rename REQ_F_PARTIAL_IO to REQ_F_BL_NO_RECYCLE
io_uring/net: remove dependency on REQ_F_PARTIAL_IO for sr->done_io
io_uring/net: correctly handle multishot recvmsg retry setup
io_uring/net: clear REQ_F_BL_EMPTY in the multishot retry handler
io_uring: fix io_queue_proc modifying req->flags
io_uring: fix mshot read defer taskrun cqe posting
io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
io_uring/net: correct the type of variable
io_uring/sqpoll: statistics of the true utilization of sq threads
io_uring/net: move recv/recvmsg flags out of retry loop
io_uring/kbuf: flag request if buffer pool is empty after buffer pick
io_uring/net: improve the usercopy for sendmsg/recvmsg
io_uring/net: move receive multishot out of the generic msghdr path
io_uring/net: unify how recvmsg and sendmsg copy in the msghdr
...
We disallow DEFER_TASKRUN multishots from running by io-wq, which is
checked by individual opcodes in the issue path. We can consolidate all
it in io_wq_submit_work() at the same time moving the checks out of the
hot path.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e492f0f11588bb5aa11d7d24e6f53b7c7628afdb.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When checking for concurrent CQE posting, we're not only interested in
requests running from the poll handler but also strayed requests ended
up in normal io-wq execution. We're disallowing multishots in general
from io-wq, not only when they came in a certain way.
Cc: stable@vger.kernel.org
Fixes: 17add5cea2 ("io_uring: force multishot CQEs into task context")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d8c5b36a39258036f93301cd60d3cd295e40653d.1709905727.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For the fast inline path, we manually recycle the io_async_msghdr and
free the iovec, and then clear the REQ_F_NEED_CLEANUP flag to avoid
that needing doing in the slower path. We already do that in 2 spots, and
in preparation for adding more, add a helper and use it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just check for larger than zero rather than check for non-zero and
not -1. This is easier to read, and also protects against any errants
< 0 values that aren't -1.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use the flag for this purpose, so rename it accordingly. This
further prevents various other use cases of it, keeping it clean and
consistent. Then we can also check it in one spot, when it's being
attempted recycled, and remove some dead code in io_kbuf_recycle_ring().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that prep handlers always initialize sr->done_io before any
potential failure conditions, and with that, we now it's always been
set even for the failure case.
With that, we don't need to use the REQ_F_PARTIAL_IO flag to gate on that.
Additionally, we should not overwrite req->cqe.res unless sr->done_io is
actually positive.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we loop for multishot receive on the initial attempt, and then abort
later on to wait for more, we miss a case where we should be copying the
io_async_msghdr from the stack to stable storage. This leads to the next
retry potentially failing, if the application had the msghdr on the
stack.
Cc: stable@vger.kernel.org
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This flag should not be persistent across retries, so ensure we clear
it before potentially attemting a retry.
Fixes: c3f9109dbc ("io_uring/kbuf: flag request if buffer pool is empty after buffer pick")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With multiple poll entries __io_queue_proc() might be running in
parallel with poll handlers and possibly task_work, we should not be
carelessly modifying req->flags there. io_poll_double_prepare() handles
a similar case with locking but it's much easier to move it into
__io_arm_poll_handler().
Cc: stable@vger.kernel.org
Fixes: 595e52284d ("io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/455cc49e38cf32026fa1b49670be8c162c2cb583.1709834755.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "controllen" variable is type size_t (unsigned long). Casting it
to int could lead to an integer underflow.
The check_add_overflow() function considers the type of the destination
which is type int. If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.
However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.
Good: 100 + (unsigned long)-4 = 96 <-- overflow
Bad: 100 + (int)-4 = 96 <-- no overflow
I deleted the cast of the sizeof() as well. That's not a bug but the
cast is unnecessary.
Fixes: 9b0fc3c054 ("io_uring: fix types in io_recvmsg_multishot_overflow")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The namelen is of type int. It shouldn't be made size_t which is
unsigned. The signed number is needed for error checking before use.
Fixes: c55978024d ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240301144349.2807544-1-usama.anjum@collabora.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Count the running time and actual IO processing time of the sqpoll
thread, and output the statistical data to fdinfo.
Variable description:
"work_time" in the code represents the sum of the jiffies of the sq
thread actually processing IO, that is, how many milliseconds it
actually takes to process IO. "total_time" represents the total time
that the sq thread has elapsed from the beginning of the loop to the
current time point, that is, how many milliseconds it has spent in
total.
The test tool is fio, and its parameters are as follows:
[global]
ioengine=io_uring
direct=1
group_reporting
bs=128k
norandommap=1
randrepeat=0
refill_buffers
ramp_time=30s
time_based
runtime=1m
clocksource=clock_gettime
overwrite=1
log_avg_msec=1000
numjobs=1
[disk0]
filename=/dev/nvme0n1
rw=read
iodepth=16
hipri
sqthread_poll=1
The test results are as follows:
Every 2.0s: cat /proc/9230/fdinfo/6 | grep -E Sq
SqMask: 0x3
SqHead: 3197153
SqTail: 3197153
CachedSqHead: 3197153
SqThread: 9231
SqThreadCpu: 11
SqTotalTime: 18099614
SqWorkTime: 16748316
The test results corresponding to different iodepths are as follows:
|-----------|-------|-------|-------|------|-------|
| iodepth | 1 | 4 | 8 | 16 | 64 |
|-----------|-------|-------|-------|------|-------|
|utilization| 2.9% | 8.8% | 10.9% | 92.9%| 84.4% |
|-----------|-------|-------|-------|------|-------|
| idle | 97.1% | 91.2% | 89.1% | 7.1% | 15.6% |
|-----------|-------|-------|-------|------|-------|
Signed-off-by: Xiaobing Li <xiaobing.li@samsung.com>
Link: https://lore.kernel.org/r/20240228091251.543383-1-xiaobing.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally we do an extra roundtrip for retries even if the buffer pool has
depleted, as we don't check that upfront. Rather than add this check, have
the buffer selection methods mark the request with REQ_F_BL_EMPTY if the
used buffer group is out of buffers after this selection. This is very
cheap to do once we're all the way inside there anyway, and it gives the
caller a chance to make better decisions on how to proceed.
For example, recv/recvmsg multishot could check this flag when it
decides whether to keep receiving or not.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're spending a considerable amount of the sendmsg/recvmsg time just
copying in the message header. And for provided buffers, the known
single entry iovec.
Be a bit smarter about it and enable/disable user access around our
copying. In a test case that does both sendmsg and recvmsg, the
runtime before this change (averaged over multiple runs, very stable
times however):
Kernel Time Diff
====================================
-git 4720 usec
-git+commit 4311 usec -8.7%
and looking at a profile diff, we see the following:
0.25% +9.33% [kernel.kallsyms] [k] _copy_from_user
4.47% -3.32% [kernel.kallsyms] [k] __io_msg_copy_hdr.constprop.0
where we drop more than 9% of _copy_from_user() time, and consequently
add time to __io_msg_copy_hdr() where the copies are now attributed to,
but with a net win of 6%.
In comparison, the same test case with send/recv runs in 3745 usec, which
is (expectedly) still quite a bit faster. But at least sendmsg/recvmsg is
now only ~13% slower, where it was ~21% slower before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the actual user_msghdr / compat_msghdr into the send and receive
sides, respectively, so we can move the uaddr receive handling into its
own handler, and ditto the multishot with buffer selection logic.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For recvmsg, we roll our own since we support buffer selections. This
isn't the case for sendmsg right now, but in preparation for doing so,
make the recvmsg copy helpers generic so we can call them from the
sendmsg side as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
1 usec is not as short as it used to be, and it makes sense to allow 0
for a busy poll timeout - this means just do one loop to check if we
have anything available. Add a separate ->napi_enabled to check if napi
has been enabled or not.
While at it, move the writing of the ctx napi values after we've copied
the old values back to userspace. This ensures that if the call fails,
we'll be in the same state as we were before, rather than some
indeterminate state.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function now deals only with discarding overflow entries on ring
free and exit, and it no longer returns whether we successfully flushed
all entries as there's no CQE posting involved anymore. Kill the
outdated comment.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.
Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.
Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.
Cc: stable@vger.kernel.org
Fixes: 515e269612 ("io_uring: revert "io_uring fix multishot accept ordering"")
Link: https://github.com/axboe/liburing/issues/1062
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit moved to using just the private task_work list for
SQPOLL, but it neglected to update the check for whether we have
pending task_work. Normally this is fine as we'll attempt to run it
unconditionally, but if we race with going to sleep AND task_work
being added, then we certainly need the right check here.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there's no current work on the list, we still need to potentially
wake the SQPOLL task if it is sleeping. This is ordered with the
wait queue addition in sqpoll, which adds to the wait queue before
checking for pending work items.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While testing io_uring NAPI with DEFER_TASKRUN, I ran into slowdowns and
stalls in packet delivery. Turns out that while
io_napi_busy_loop_should_end() aborts appropriately on regular
task_work, it does not abort if we have local task_work pending.
Move io_has_work() into the private io_uring.h header, and gate whether
we should continue polling on that as well. This makes NAPI polling on
send/receive work as designed with IORING_SETUP_DEFER_TASKRUN as well.
Fixes: 8d0c12a80c ("io-uring: add napi busy poll support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changes to AF_UNIX trigger rebuild of io_uring, but io_uring does
not use AF_UNIX anymore.
Let's not include af_unix.h and instead include necessary headers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240212234236.63714-1-kuniyu@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds an api to register and unregister the napi for io-uring. If
the arg value is specified when unregistering, the current napi setting
for the busy poll timeout is copied into the user structure. If this is
not required, NULL can be passed as the arg value.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230608163839.2891748-7-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds the sqpoll support to the io-uring napi.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Suggested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/20230608163839.2891748-6-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds the napi busy polling support in io_uring.c. It adds a new
napi_list to the io_ring_ctx structure. This list contains the list of
napi_id's that are currently enabled for busy polling. The list is
synchronized by the new napi_lock spin lock. The current default napi
busy polling time is stored in napi_busy_poll_to. If napi busy polling
is not enabled, the value is 0.
In addition there is also a hash table. The hash table store the napi
id and the pointer to the above list nodes. The hash table is used to
speed up the lookup to the list elements. The hash table is synchronized
with rcu.
The NAPI_TIMEOUT is stored as a timeout to make sure that the time a
napi entry is stored in the napi list is limited.
The busy poll timeout is also stored as part of the io_wait_queue. This
is necessary as for sq polling the poll interval needs to be adjusted
and the napi callback allows only to pass in one value.
This has been tested with two simple programs from the liburing library
repository: the napi client and the napi server program. The client
sends a request, which has a timestamp in its payload and the server
replies with the same payload. The client calculates the roundtrip time
and stores it to calculate the results.
The client is running on host1 and the server is running on host 2 (in
the same rack). The measured times below are roundtrip times. They are
average times over 5 runs each. Each run measures 1 million roundtrips.
no rx coal rx coal: frames=88,usecs=33
Default 57us 56us
client_poll=100us 47us 46us
server_poll=100us 51us 46us
client_poll=100us+ 40us 40us
server_poll=100us
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on client
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on server
client_poll=100us+ 41us 39us
server_poll=100us+
prefer napi busy poll on client + server
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Suggested-by: Olivier Langlois <olivier@trillion01.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230608163839.2891748-5-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This moves the definition of the io_wait_queue structure to the header
file so it can be also used from other files.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-4-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adds support for doing truncate through io_uring, eliminating
the need for applications to roll their own thread pool or offload
mechanism to be able to do non-blocking truncates.
Signed-off-by: Tony Solomonik <tony.solomonik@gmail.com>
Link: https://lore.kernel.org/r/20240202121724.17461-3-tony.solomonik@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 0a31bd5f2b ("KMEM_CACHE(): simplify slab cache creation")
introduces a new macro.
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240130100247.81460-1-chentao@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decouple from task_work running, and cap the number of entries we process
at the time. If we exceed that number, push remaining entries to a retry
list that we'll process first next time.
We cap the number of entries to process at 8, which is fairly random.
We just want to get enough per-ctx batching here, while not processing
endlessly.
Since we manually run PF_IO_WORKER related task_work anyway as the task
never exits to userspace, with this we no longer need to add an actual
task_work item to the per-process list.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for returning
something other than count from this helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we don't loop around task_work anymore, there's no point in
maintaining the ring and locked state outside of handle_tw_list(). Get
rid of passing in those pointers (and pointers to pointers) and just do
the management internally in handle_tw_list().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This overly long line is hard to read. Break it up by AND'ing the
ref mask first, then perform the atomic_sub_return() with the value
itself.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have a ton of notifications coming in, we can be looping in here
for a long time. This can be problematic for various reasons, mostly
because we can starve userspace. If the application is waiting on N
events, then only re-run if we need more events.
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We just reversed the task_work list and that will have touched requests
as well, just get rid of this optimization as it should not make a
difference anymore.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For local task_work, which is used if IORING_SETUP_DEFER_TASKRUN is set,
we reverse the order of the lockless list before processing the work.
This is done to process items in the order in which they were queued, as
the llist always adds to the head.
Do the same for traditional task_work, so we have the same behavior for
both types.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer loop in task_work handling, hence delete the argument from
the tracepoint as it's always 1 and hence not very informative.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit added looping around handling traditional task_work
as an optimization, and while that may seem like a good idea, it's also
possible to run into application starvation doing so. If the task_work
generation is bursty, we can get very deep task_work queues, and we can
end up looping in here for a very long time.
One immediately observable problem with that is handling network traffic
using provided buffers, where flooding incoming traffic and looping
task_work handling will very quickly lead to buffer starvation as we
keep running task_work rather than returning to the application so it
can handle the associated CQEs and also provide buffers back.
Fixes: 3a0c037b0e ("io_uring: batch task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have various functions calculating the CQE cflags we need to pass
back, but it's all the same everywhere. Make a number of the putting
functions void, and just have the two main helps for this, io_put_kbuf()
and io_put_kbuf_comp() calculate the actual mask and pass it back.
While at it, cleanup how we put REQ_F_BUFFER_RING buffers. Before
this change, we would call into __io_put_kbuf() only to go right back
in to the header defined functions. As clearing this type of buffer
is just re-assigning the buf_index and incrementing the head, this
is very wasteful.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any read/write opcode has needs_file == true, which means that we
would've failed the request long before reaching the issue stage if we
didn't successfully assign a file. This check has been dead forever,
and is really a leftover from generic code.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the ctx declaration and assignment up to be generally available
in the function, as we use req->ctx at the top anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Any of the fast paths will already have this locked, this helper only
exists to deal with io-wq invoking request issue where we do not have
the ctx->uring_lock held already. This means that any common or fast
path will already have this locked, mark it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a flag to avoid dipping dereferencing file and then f_op to
figure out if the file has a poll handler defined or not. We generally
call this at least twice for networked workloads, and if using ring
provided buffers, we do it on every buffer selection. Particularly the
latter is troublesome, as it's otherwise a very fast operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just leave it unset by default, avoiding dipping into the last
cacheline (which is otherwise untouched) for the fast path of using
poll to drive networked traffic. Add a flag that tells us if the
sequence is valid or not, and then we can defer actually assigning
the flag and sequence until someone runs cancelations.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're out of space here, and none of the flags are easily reclaimable.
Bump it to 64-bits and re-arrange the struct a bit to avoid gaps.
Add a specific bitwise type for the request flags, io_request_flags_t.
This will help catch violations of casting this value to a smaller type
on 32-bit archs, like unsigned int.
This creates a hole in the io_kiocb, so move nr_tw up and rsrc_node down
to retain needing only cacheline 0 and 1 for non-polled opcodes.
No functional changes intended in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af1 ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Cc: stable@vger.kernel.org
Depends-on: 704ea888d6 ("io_uring/poll: add requeue return code from poll multishot handling")
Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()")
Depends-on: e84b01a880 ("io_uring/poll: move poll execution helpers higher up")
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Link: https://github.com/axboe/liburing/issues/1043
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since our poll handling is edge triggered, multishot handlers retry
internally until they know that no more data is available. In
preparation for limiting these retries, add an internal return code,
IOU_REQUEUE, which can be used to inform the poll backend about the
handler wanting to retry, but that this should happen through a normal
task_work requeue rather than keep hammering on the issue side for this
one request.
No functional changes in this patch, nobody is using this return code
just yet.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for putting some retry logic in there, have the done
path just skip straight to the end rather than have too much nesting
in here.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for calling __io_poll_execute() higher up, move the
functions to avoid forward declarations.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_read_mshot() always relies on poll triggering retries, and this works
fine as long as we do a retry per size of the buffer being read. The
buffer size is given by the size of the buffer(s) in the given buffer
group ID.
But if we're reading less than what is available, then we don't always
get to read everything that is available. For example, if the buffers
available are 32 bytes and we have 64 bytes to read, then we'll
correctly read the first 32 bytes and then wait for another poll trigger
before we attempt the next read. This next poll trigger may never
happen, in which case we just sit forever and never make progress, or it
may trigger at some point in the future, and now we're just delivering
the available data much later than we should have.
io_read_mshot() could do retries itself, but that is wasteful as we'll
be going through all of __io_read() again, and most likely in vain.
Rather than do that, bump our poll reference count and have
io_poll_check_events() do one more loop and check with vfs_poll() if we
have more data to read. If we do, io_read_mshot() will get invoked again
directly and we'll read the next chunk.
io_poll_multishot_retry() must only get called from inside
io_poll_issue(), which is our multishot retry handler, as we know we
already "own" the request at this point.
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1041
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to correct some aspects of the IORING_OP_FIXED_FD_INSTALL
command to take into account the security implications of making an
io_uring-private file descriptor generally accessible to a userspace
task.
The first change in this patch is to enable auditing of the FD_INSTALL
operation as installing a file descriptor into a task's file descriptor
table is a security relevant operation and something that admins/users
may want to audit.
The second change is to disable the io_uring credential override
functionality, also known as io_uring "personalities", in the
FD_INSTALL command. The credential override in FD_INSTALL is
particularly problematic as it affects the credentials used in the
security_file_receive() LSM hook. If a task were to request a
credential override via REQ_F_CREDS on a FD_INSTALL operation, the LSM
would incorrectly check to see if the overridden credentials of the
io_uring were able to "receive" the file as opposed to the task's
credentials. After discussions upstream, it's difficult to imagine a
use case where we would want to allow a credential override on a
FD_INSTALL operation so we are simply going to block REQ_F_CREDS on
IORING_OP_FIXED_FD_INSTALL operations.
Fixes: dc18b89ab1 ("io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240123215501.289566-2-paul@paul-moore.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=rd3Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/io_uring-2024-01-18' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Nothing major in here, just a few fixes and cleanups that arrived
after the initial merge window pull request got finalized, as well as
a fix for a patch that got merged earlier"
* tag 'for-6.8/io_uring-2024-01-18' of git://git.kernel.dk/linux:
io_uring: combine cq_wait_nr checks
io_uring: clean *local_work_add var naming
io_uring: clean up local tw add-wait sync
io_uring: adjust defer tw counting
io_uring/register: guard compat syscall with CONFIG_COMPAT
io_uring/rsrc: improve code generation for fixed file assignment
io_uring/rw: cleanup io_rw_done()
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Instead of explicitly checking ->cq_wait_nr for whether there are
waiting, which is currently represented by 0, we can store there a
large value and the nr_tw will automatically filter out those cases.
Add a named constant for that and for the wake up bias value.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/38def30282654d980673976cd42fde9bab19b297.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
if (!first) { ... }
While it reads as do something if it's not the first entry, it does
exactly the opposite because "first" here is a pointer to the first
entry. Remove the confusion by renaming it into "head".
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3b8be483b52f58a524185bb88694b8a268e7e85d.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The UINT_MAX work item counting bias in io_req_local_work_add() in case
of !IOU_F_TWQ_LAZY_WAKE works in a sense that we will not miss a wake up,
however it's still eerie. In particular, if we add a lazy work item
after a non-lazy one, we'll increment it and get nr_tw==0, and
subsequent adds may try to unnecessarily wake up the task, which is
though not so likely to happen in real workloads.
Half the bias, it's still large enough to be larger than any valid
->cq_wait_nr, which is limited by IORING_MAX_CQ_ENTRIES, but further
have a good enough of space before it overflows.
Fixes: 8751d15426 ("io_uring: reduce scheduling due to tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/108b971e958deaf7048342930c341ba90f75d806.1705438669.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add compat.h include to avoid a potential build issue:
io_uring/register.c:281:6: error: call to undeclared function 'in_compat_syscall'; ISO C99 and later do not support implicit function declarations [-Werror,-Wimplicit-function-declaration]
if (in_compat_syscall()) {
^
1 warning generated.
io_uring/register.c:282:9: error: call to undeclared function 'compat_get_bitmap'; ISO C99 and later do not support implicit function declarations [-Werror,-Wimplicit-function-declaration]
ret = compat_get_bitmap(cpumask_bits(new_mask),
^
Fixes: c43203154d ("io_uring/register: move io_uring_register(2) related code to register.c")
Reported-by: Manu Bretelle <chantra@meta.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=5v/U
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Mostly just come fixes and cleanups, but one feature as well. In
detail:
- Harden the check for handling IOPOLL based on return (Pavel)
- Various minor optimizations (Pavel)
- Drop remnants of SCM_RIGHTS fd passing support, now that it's no
longer supported since 6.7 (me)
- Fix for a case where bytes_done wasn't initialized properly on a
failure condition for read/write requests (me)
- Move the register related code to a separate file (me)
- Add support for returning the provided ring buffer head (me)
- Add support for adding a direct descriptor to the normal file table
(me, Christian Brauner)
- Fix for ensuring pending task_work for a ring with DEFER_TASKRUN is
run even if we timeout waiting (me)"
* tag 'for-6.8/io_uring-2024-01-08' of git://git.kernel.dk/linux:
io_uring: ensure local task_work is run on wait timeout
io_uring/kbuf: add method for returning provided buffer ring head
io_uring/rw: ensure io->bytes_done is always initialized
io_uring: drop any code related to SCM_RIGHTS
io_uring/unix: drop usage of io_uring socket
io_uring/register: move io_uring_register(2) related code to register.c
io_uring/openclose: add support for IORING_OP_FIXED_FD_INSTALL
io_uring/cmd: inline io_uring_cmd_get_task
io_uring/cmd: inline io_uring_cmd_do_in_task_lazy
io_uring: split out cmd api into a separate header
io_uring: optimise ltimeout for inline execution
io_uring: don't check iopoll if request completes
-----BEGIN PGP SIGNATURE-----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=YAfp
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
For the normal read/write path, we have already locked the ring
submission side when assigning the file. This causes branch
mispredictions when we then check and try and lock again in
io_req_set_rsrc_node(). As this is a very hot path, this matters.
Add a basic helper that already assumes we already have it locked,
and use that in io_file_get_fixed().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This originally came from the aio side, and it's laid out rather oddly.
The common case here is that we either get -EIOCBQUEUED from submitting
an async request, or that we complete the request correctly with the
given number of bytes. Handling the odd internal restart error codes
is not a common operation.
Lay it out a bit more optimally that better explains the normal flow,
and switch to avoiding the indirect call completely as this is our
kiocb and we know the completion handler can only be one of two
possible variants. While at it, move it to where it belongs in the
file, with fellow end IO helpers.
Outside of being easier to read, this also reduces the text size of the
function by 24 bytes for me on arm64.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzXQAKCRCRxhvAZXjc
ogOtAQDpqUp1zY4dV/dZisCJ5xarZTsSZ1AvgmcxZBtS0NhbdgEAshWvYGA9ryS/
ChL5jjtjjZDLhRA//reoFHTQIrdp2w8=
=bF+R
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUxRQAKCRCRxhvAZXjc
ov/QAQDzvge3oQ9MEymmOiyzzcF+HhAXBr+9oEsYJjFc1p0TsgEA61gXjZo7F1jY
KBqd6znOZCR+Waj0kIVJRAo/ISRBqQc=
=0bRl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.
Move the break condition to _after_ we have run task_work.
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper kasan_mempool_unpoison_object hook for unpoisoning cached
objects.
A future change might also update io_uring to check the return value of
kasan_mempool_poison_object to prevent double-free and invalid-free bugs.
This proves to be non-trivial with the current way io_uring caches
objects, so this is left out-of-scope of this series.
Link: https://lkml.kernel.org/r/eca18d6cbf676ed784f1a1f209c386808a8087c5.1703024586.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kasan: save mempool stack traces".
This series updates KASAN to save alloc and free stack traces for
secondary-level allocators that cache and reuse allocations internally
instead of giving them back to the underlying allocator (e.g. mempool).
As a part of this change, introduce and document a set of KASAN hooks:
bool kasan_mempool_poison_pages(struct page *page, unsigned int order);
void kasan_mempool_unpoison_pages(struct page *page, unsigned int order);
bool kasan_mempool_poison_object(void *ptr);
void kasan_mempool_unpoison_object(void *ptr, size_t size);
and use them in the mempool code.
Besides mempool, skbuff and io_uring also cache allocations and already
use KASAN hooks to poison those. Their code is updated to use the new
mempool hooks.
The new hooks save alloc and free stack traces (for normal kmalloc and
slab objects; stack traces for large kmalloc objects and page_alloc are
not supported by KASAN yet), improve the readability of the users' code,
and also allow the users to prevent double-free and invalid-free bugs; see
the patches for the details.
This patch (of 21):
Rename kasan_slab_free_mempool to kasan_mempool_poison_object.
kasan_slab_free_mempool is a slightly confusing name: it is unclear
whether this function poisons the object when it is freed into mempool or
does something when the object is freed from mempool to the underlying
allocator.
The new name also aligns with other mempool-related KASAN hooks added in
the following patches in this series.
Link: https://lkml.kernel.org/r/cover.1703024586.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/c5618685abb7cdbf9fb4897f565e7759f601da84.1703024586.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tail of the provided ring buffer is shared between the kernel and
the application, but the head is private to the kernel as the
application doesn't need to see it. However, this also prevents the
application from knowing how many buffers the kernel has consumed.
Usually this is fine, as the information is inherently racy in that
the kernel could be consuming buffers continually, but for cleanup
purposes it may be relevant to know how many buffers are still left
in the ring.
Add IORING_REGISTER_PBUF_STATUS which will return status for a given
provided buffer ring. Right now it just returns the head, but space
is reserved for more information later in, if needed.
Link: https://github.com/axboe/liburing/discussions/1020
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IOSQE_ASYNC is set and we fail importing an iovec for a readv or
writev request, then we leave ->bytes_done uninitialized and hence the
eventual failure CQE posted can potentially have a random res value
rather than the expected -EINVAL.
Setup ->bytes_done before potentially failing, so we have a consistent
value if we fail the request early.
Cc: stable@vger.kernel.org
Reported-by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bring in the changes to the file infrastructure for this cycle. Mostly
cleanups and some performance tweaks.
* file: remove __receive_fd()
* file: stop exposing receive_fd_user()
* fs: replace f_rcuhead with f_task_work
* file: remove pointless wrapper
* file: s/close_fd_get_file()/file_close_fd()/g
* Improve __fget_files_rcu() code generation (and thus __fget_light())
* file: massage cleanup of files that failed to open
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since we no longer allow sending io_uring fds over SCM_RIGHTS, move to
using io_is_uring_fops() to detect whether this is a io_uring fd or not.
With that done, kill off io_uring_get_socket() as nobody calls it
anymore.
This is in preparation to yanking out the rest of the core related to
unix gc with io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of this code is basically self contained, move it out of the core
io_uring file to bring a bit more separation to the registration related
bits. This moves another ~10% of the code into register.c.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In 8e9fad0e70 "io_uring: Add io_uring command support for sockets"
you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c.
That had been done for the sake of this chunk -
+ ret = prot->ioctl(sk, SIOCINQ, &arg);
+ if (ret)
+ return ret;
+ return arg;
+ case SOCKET_URING_OP_SIOCOUTQ:
+ ret = prot->ioctl(sk, SIOCOUTQ, &arg);
SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from
ioctls.h, all right, but the values vary by the architecture.
FIONREAD is
0x467F on mips
0x4004667F on alpha, powerpc and sparc
0x8004667F on sh and xtensa
0x541B everywhere else
TIOCOUTQ is
0x7472 on mips
0x40047473 on alpha, powerpc and sparc
0x80047473 on sh and xtensa
0x5411 everywhere else
->ioctl() expects the same values it would've gotten from userland; all
places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so
they pick the correct values. io_uring_cmd_sock(), OTOH, ends up
passing the default ones.
Fixes: 8e9fad0e70 ("io_uring: Add io_uring command support for sockets")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.
If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 6ce4a93dbb ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring can currently open/close regular files or fixed/direct
descriptors. Or you can instantiate a fixed descriptor from a regular
one, and then close the regular descriptor. But you currently can't turn
a purely fixed/direct descriptor into a regular file descriptor.
IORING_OP_FIXED_FD_INSTALL adds support for installing a direct
descriptor into the normal file table, just like receiving a file
descriptor or opening a new file would do. This is all nicely abstracted
into receive_fd(), and hence adding support for this is truly trivial.
Since direct descriptors are only usable within io_uring itself, it can
be useful to turn them into real file descriptors if they ever need to
be accessed via normal syscalls. This can either be a transitory thing,
or just a permanent transition for a given direct descriptor.
By default, new fds are installed with O_CLOEXEC set. The application
can disable O_CLOEXEC by setting IORING_FIXED_FD_NO_CLOEXEC in the
sqe->install_fd_flags member.
Suggested-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
linux/io_uring.h is slowly becoming a rubbish bin where we put
anything exposed to other subsystems. For instance, the task exit
hooks and io_uring cmd infra are completely orthogonal and don't need
each other's definitions. Start cleaning it up by splitting out all
command bits into a new header file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ec50bae6e21f371d3850796e716917fc141225a.1701391955.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At one point in time we had an optimisation that would not spin up a
linked timeout timer when the master request successfully completes
inline (during the first nowait execution attempt). We somehow lost it,
so this patch restores it back.
Note, that it's fine using io_arm_ltimeout() after the io_issue_sqe()
completes the request because of delayed completion, but that that adds
unwanted overhead.
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8bf69c2a4beec14c565c85c86edb871ca8b8bcc8.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOPOLL request should never return IOU_OK, so the following iopoll
queueing check in io_issue_sqe() after getting IOU_OK doesn't make any
sense as would never turn true. Let's optimise on that and return a bit
earlier. It's also much more resilient to potential bugs from
mischieving iopoll implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f8690e2fa5213a2ff292fac29a7143c036cdd60.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge vfs.file from the VFS tree to avoid conflicts with receive_fd() now
having 3 arguments rather than just 2.
* 'vfs.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
Only io_uring uses __close_fd_get_file(). All it does is hide
current->files but io_uring accesses files_struct directly right now
anyway so it's a bit pointless. Just rename pick_file() to
file_close_fd_locked() and let io_uring use it. Add a lockdep assert in
there that we expect the caller to hold file_lock while we're at it.
Link: https://lore.kernel.org/r/20231130-vfs-files-fixes-v1-2-e73ca6f4ea83@kernel.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes: 0091bfc817 ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the buffer list 'is_ready' check below the validity check for
the buffer list for a given group.
Fixes: 5cf4f52e6d ("io_uring: free io_buffer_list entries via RCU")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Callers of mutex_unlock() have to make sure that the mutex stays alive
for the whole duration of the function call. For io_uring that means
that the following pattern is not valid unless we ensure that the
context outlives the mutex_unlock() call.
mutex_lock(&ctx->uring_lock);
req_put(req); // typically via io_req_task_submit()
mutex_unlock(&ctx->uring_lock);
Most contexts are fine: io-wq pins requests, syscalls hold the file,
task works are taking ctx references and so on. However, the task work
fallback path doesn't follow the rule.
Cc: <stable@vger.kernel.org>
Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No more users of this field.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231130215309.2923568-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally within a syscall it's fine to use fdget/fdput for grabbing a
file from the file table, and it's fine within io_uring as well. We do
that via io_uring_enter(2), io_uring_register(2), and then also for
cancel which is invoked from the latter. io_uring cannot close its own
file descriptors as that is explicitly rejected, and for the cancel
side of things, the file itself is just used as a lookup cookie.
However, it is more prudent to ensure that full references are always
grabbed. For anything threaded, either explicitly in the application
itself or through use of the io-wq worker threads, this is what happens
anyway. Generalize it and use fget/fput throughout.
Also see the below link for more details.
Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mmap_lock nests under uring_lock out of necessity, as we may be doing
user copies with uring_lock held. However, for mmap of provided buffer
rings, we attempt to grab uring_lock with mmap_lock already held from
do_mmap(). This makes lockdep, rightfully, complain:
WARNING: possible circular locking dependency detected
6.7.0-rc1-00009-gff3337ebaf94-dirty #4438 Not tainted
------------------------------------------------------
buf-ring.t/442 is trying to acquire lock:
ffff00020e1480a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_uring_validate_mmap_request.isra.0+0x4c/0x140
but task is already holding lock:
ffff0000dc226190 (&mm->mmap_lock){++++}-{3:3}, at: vm_mmap_pgoff+0x124/0x264
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_lock){++++}-{3:3}:
__might_fault+0x90/0xbc
io_register_pbuf_ring+0x94/0x488
__arm64_sys_io_uring_register+0x8dc/0x1318
invoke_syscall+0x5c/0x17c
el0_svc_common.constprop.0+0x108/0x130
do_el0_svc+0x2c/0x38
el0_svc+0x4c/0x94
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
-> #0 (&ctx->uring_lock){+.+.}-{3:3}:
__lock_acquire+0x19a0/0x2d14
lock_acquire+0x2e0/0x44c
__mutex_lock+0x118/0x564
mutex_lock_nested+0x20/0x28
io_uring_validate_mmap_request.isra.0+0x4c/0x140
io_uring_mmu_get_unmapped_area+0x3c/0x98
get_unmapped_area+0xa4/0x158
do_mmap+0xec/0x5b4
vm_mmap_pgoff+0x158/0x264
ksys_mmap_pgoff+0x1d4/0x254
__arm64_sys_mmap+0x80/0x9c
invoke_syscall+0x5c/0x17c
el0_svc_common.constprop.0+0x108/0x130
do_el0_svc+0x2c/0x38
el0_svc+0x4c/0x94
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
From that mmap(2) path, we really just need to ensure that the buffer
list doesn't go away from underneath us. For the lower indexed entries,
they never go away until the ring is freed and we can always sanely
reference those as long as the caller has a file reference. For the
higher indexed ones in our xarray, we just need to ensure that the
buffer list remains valid while we return the address of it.
Free the higher indexed io_buffer_list entries via RCU. With that we can
avoid needing ->uring_lock inside mmap(2), and simply hold the RCU read
lock around the buffer list lookup and address check.
To ensure that the arrayed lookup either returns a valid fully formulated
entry via RCU lookup, add an 'is_ready' flag that we access with store
and release memory ordering. This isn't needed for the xarray lookups,
but doesn't hurt either. Since this isn't a fast path, retain it across
both types. Similarly, for the allocated array inside the ctx, ensure
we use the proper load/acquire as setup could in theory be running in
parallel with mmap.
While in there, add a few lockdep checks for documentation purposes.
Cc: stable@vger.kernel.org
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We used to just use our page list for final teardown, which would ensure
that we got all the buffers, even the ones that were not on the normal
cached list. But while moving to slab for the io_buffers, we know only
prune this list, not the deferred locked list that we have. This can
cause a leak of memory, if the workload ends up using the intermediate
locked list.
Fix this by always pruning both lists when tearing down.
Fixes: b3a4dbc89d ("io_uring/kbuf: Use slab for struct io_buffer objects")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now we stash any potentially mmap'ed provided ring buffer range
for freeing at release time, regardless of when they get unregistered.
Since we're keeping track of these ranges anyway, keep track of their
registration state as well, and use that to recycle ranges when
appropriate rather than always allocate new ones.
The lookup is a basic scan of entries, checking for the best matching
free entry.
Fixes: c392cbecd8 ("io_uring/kbuf: defer release of mapped buffer rings")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the
kernel allocates the memory for it and the application is expected to
mmap(2) this memory. However, io_uring uses remap_pfn_range() for this
operation, so we cannot rely on normal munmap/release on freeing them
for us.
Stash an io_buf_free entry away for each of these, if any, and provide
a helper to free them post ->release().
Cc: stable@vger.kernel.org
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The eventfd_signal_mask() helper was introduced for io_uring and similar
to eventfd_signal() it always passed 1 for @n. So don't bother with that
argument at all.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-3-bd549b14ce0c@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This flag only applies to the SQ and CQ rings, it's perfectly valid
to use a mmap approach for the provided ring buffers. Move the
check into where it belongs.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqes_map() is used rather than io_mem_alloc(), if the application
passes in memory for mapping rather than have the kernel allocate it and
then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the
page mapping and pinning, which checks if we end up with the same pages,
if more than one page is mapped. But this check is incorrect and only
checks if the first and last pages are the same, where it really should
be checking if the mapped pages are contigous. This allows mapping a
single normal page, or a huge page range.
Down the line we can add support for remapping pages to be virtually
contigous, which is really all that io_uring cares about.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the offset equals the bv_len of the first registered bvec, then the
request does not include any of that first bvec. Skip it so that drivers
don't have to deal with a zero length bvec, which was observed to break
NVMe's PRP list creation.
Cc: stable@vger.kernel.org
Fixes: bd11b3a391 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit added a trylock for getting the SQPOLL thread info via
fdinfo, but this introduced a regression where we often fail to get it if
the thread is busy. For that case, we end up not printing the current CPU
and PID info.
Rather than rely on this lock, just print the pid we already stored in
the io_sq_data struct, and ensure we update the current CPU every time
we've slept or potentially rescheduled. The latter won't potentially be
100% accurate, but that wasn't the case before either as the task can
get migrated at any time unless it has been pinned at creation time.
We retain keeping the io_sq_data dereference inside the ctx->uring_lock,
as it has always been, as destruction of the thread and data happen below
that. We could make this RCU safe, but there's little point in doing that.
With this, we always print the last valid information we had, rather than
have spurious outputs with missing information.
Fixes: 7644b1a1c9 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
The call to the inode_init_security_anon() LSM hook is not the sole
reason to use anon_inode_getfile_secure() or anon_inode_getfd_secure().
For example, the functions also allow one to create a file with non-zero
size, without needing a full-blown filesystem. In this case, you don't
need a "secure" version, just unique inodes; the current name of the
functions is confusing and does not explain well the difference with
the more "standard" anon_inode_getfile() and anon_inode_getfd().
Of course, there is another side of the coin; neither io_uring nor
userfaultfd strictly speaking need distinct inodes, and it is not
that clear anymore that anon_inode_create_get{file,fd}() allow the LSM
to intercept and block the inode's creation. If one was so inclined,
anon_inode_getfile_secure() and anon_inode_getfd_secure() could be kept,
using the shared inode or a new one depending on CONFIG_SECURITY.
However, this is probably overkill, and potentially a cause of bugs in
different configurations. Therefore, just add a comment to io_uring
and userfaultfd explaining the choice of the function.
While at it, remove the export for what is now anon_inode_create_getfd().
There is no in-tree module that uses it, and the old name is gone anyway.
If anybody actually needs the symbol, they can ask or they can just use
anon_inode_create_getfile(), which will be exported very soon for use
in KVM.
Suggested-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When doing a multishot read, the code path reuses the old read
paths. However this breaks an assumption built into those paths,
namely that struct io_rw::len is available for reuse by __io_import_iovec.
For multishot this results in len being set for the first receive
call, and then subsequent calls are clamped to that buffer length
incorrectly.
Instead keep len as zero after recycling buffers, to reuse the full
buffer size of the next selected buffer.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-4-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For addr: this field is not used, since buffer select is forced.
But by forcing it to be zero it leaves open future uses of the field.
len is actually usable, you could imagine that you want to receive
multishot up to a certain length.
However right now this is not how it is implemented, and it seems
safer to force this to be zero.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-3-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can be useful to know if io_kbuf_recycle did actually recycle the
buffer on the request, or if it left the request alone.
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Link: https://lore.kernel.org/r/20231106203909.197089-2-dyudaken@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than sprinkle opcode checks in the generic read/write prep handler,
have a separate prep handler for the vectored readv/writev operation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:
sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);
ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:
connect(sock, &addr, sizeof(addr));
you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.
io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.
Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.
This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd6881 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new read multishot method doesn't need to allocate async data ever,
as it doesn't do vectored IO and it must only be used with provided
buffers. While it doesn't have ->prep_async() set, it also sets
->async_size to 0, which is different from any other read/write type we
otherwise support.
If it's used on a file type that isn't pollable, we do try and allocate
this async data, and then try and use that data. But since we passed in
a size of 0 for the data, we get a NULL back on data allocation. We then
proceed to dereference that to copy state, and that obviously won't end
well.
Add a check in io_setup_async_rw() for this condition, and avoid copying
state. Also add a check for whether or not buffer selection is specified
in prep while at it.
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218101
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmVAUXUQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpuGsEADEs0/4uXb8kLUF/y0B0bY9jmwiw5id14g5
TkAH9lbceV0Yv0E1tPeWYIz7Y7s83UOduFVZo4hRH8EysH3IYFZCI/ny3v2nJ1av
lN7F7YegVOu6qx77e/CwLo7on14awHkSo8pUdCOm6tYLunLg42miRf+xTpSAL0Mg
ONnt0WxWDOgdNvTaGwBPaVE78FAWK8nc2ACzonQGfzCl2VXOsSy9JaJJMv8eyXOf
VVZCNcSvHh/zVznlC1YPoZh/bgS2UUJmIGL/XMQnM5qzbK1IPpzlN0cu8rje3s9b
TUKBKqr6xhC9nyAS1qAjgZ98RfjVnzcbMX+aWEb/Z0y9XFJVSSQQdW+f9A/0KLZm
jAejHJpNuqwEdB9MplHTXdeSDTkJH3YNbXvtwA6cc/KpZ1FVQXlhSJPp/mbOa7qe
IIeg6SYt84uZ2HxflTtm+I1uVE9QMcsesy3FIK4kxhA8jSximQw+hPZ3xrv4AHLd
cTkRAzfXPUFsJJQCgpv289QXobV/vsFhCFTHFxv63H+EGpJ7e1EaW6Eq0pAHG0Ai
8kk5Ns29jzTVer1W3sMMeDaZ7S8hGRAyRC+Zb/0QxtGsmvxikB0qY1GpdRGPFueQ
gOawhLZdhkigIsq0U1UGMpHKY0G1Sl9wvHuH2qzUKeWk+vFRv5RwR6zQuVJr2Jo/
j3HgyYDs7Q==
=Z0L0
-----END PGP SIGNATURE-----
Merge tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring futex support from Jens Axboe:
"This adds support for using futexes through io_uring - first futex
wake and wait, and then the vectored variant of waiting, futex waitv.
For both wait/wake/waitv, we support the bitset variant, as the
'normal' variants can be easily implemented on top of that.
PI and requeue are not supported through io_uring, just the above
mentioned parts. This may change in the future, but in the spirit of
keeping this small (and based on what people have been asking for),
this is what we currently have.
Wake support is pretty straight forward, most of the thought has gone
into the wait side to avoid needing to offload wait operations to a
blocking context. Instead, we rely on the usual callbacks to retry and
post a completion event, when appropriate.
As far as I can recall, the first request for futex support with
io_uring came from Andres Freund, working on postgres. His aio rework
of postgres was one of the early adopters of io_uring, and futex
support was a natural extension for that. This is relevant from both a
usability point of view, as well as for effiency and performance. In
Andres's words, for the former:
Futex wait support in io_uring makes it a lot easier to avoid
deadlocks in concurrent programs that have their own buffer pool:
Obviously pages in the application buffer pool have to be locked
during IO. If the initiator of IO A needs to wait for a held lock
B, the holder of lock B might wait for the IO A to complete. The
ability to wait for a lock and IO completions at the same time
provides an efficient way to avoid such deadlocks
and in terms of effiency, even without unlocking the full potential
yet, Andres says:
Futex wake support in io_uring is useful because it allows for more
efficient directed wakeups. For some "locks" postgres has queues
implemented in userspace, with wakeup logic that cannot easily be
implemented with FUTEX_WAKE_BITSET on a single "futex word"
(imagine waiting for journal flushes to have completed up to a
certain point).
Thus a "lock release" sometimes need to wake up many processes in a
row. A quick-and-dirty conversion to doing these wakeups via
io_uring lead to a 3% throughput increase, with 12% fewer context
switches, albeit in a fairly extreme workload"
* tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux:
io_uring: add support for vectored futex waits
futex: make the vectored futex operations available
futex: make futex_parse_waitv() available as a helper
futex: add wake_data to struct futex_q
io_uring: add support for futex wake and wait
futex: abstract out a __futex_wake_mark() helper
futex: factor out the futex wake handling
futex: move FUTEX2_VALID_MASK to futex.h
-----BEGIN PGP SIGNATURE-----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=sk8+
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
-----BEGIN PGP SIGNATURE-----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=okQ8
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This contains the core io_uring updates, of which there are not many,
and adds support for using WAITID through io_uring and hence not
needing to block on these kinds of events.
Outside of that, tweaks to the legacy provided buffer handling and
some cleanups related to cancelations for uring_cmd support"
* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
io_uring/kbuf: Use slab for struct io_buffer objects
io_uring/kbuf: Allow the full buffer id space for provided buffers
io_uring/kbuf: Fix check of BID wrapping in provided buffers
io_uring/rsrc: cleanup io_pin_pages()
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZTpoQAAKCRCRxhvAZXjc
ovFNAQDgIRjXfZ1Ku+USxsRRdqp8geJVaNc3PuMmYhOYhUenqgEAmC1m+p0y31dS
P6+HlL16Mqgu0tpLCcJK9BibpDZ0Ew4=
=7yD1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZTxSwQAKCRBZ7Krx/gZQ
6zadAP9o/724KPDCY3ybgwKyEQ1UNjHTriFRBeoF3o2q0WgidwEA+/xS0Xk3i25w
xnSZO/8My1edE1IcK/JDwewH/J+4Kw0=
=N/Lv
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If an application does O_DIRECT writes with io_uring and the file system
supports IOCB_DIO_CALLER_COMP, then completions of the dio write side is
done from the task_work that will post the completion event for said
write as well.
Whenever a dio write is done against a file, the inode i_dio_count is
elevated. This enables other callers to use inode_dio_wait() to wait for
previous writes to complete. If we defer the full dio completion to
task_work, we are dependent on that task_work being run before the
inode i_dio_count can be decremented.
If the same task that issues io_uring dio writes with
IOCB_DIO_CALLER_COMP performs a synchronous system call that calls
inode_dio_wait(), then we can deadlock as we're blocked sleeping on
the event to become true, but not processing the completions that will
result in the inode i_dio_count being decremented.
Until we can guarantee that this is the case, then disable the deferred
caller completions.
Fixes: 099ada2c87 ("io_uring/rw: add write support for IOCB_DIO_CALLER_COMP")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add initial support for SOCKET_URING_OP_SETSOCKOPT. This new command is
similar to setsockopt. This implementation leverages the function
do_sock_setsockopt(), which is shared with the setsockopt() system call
path.
Important to say that userspace needs to keep the pointer's memory alive
until the operation is completed. I.e, the memory could not be
deallocated before the CQE is returned to userspace.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231016134750.1381153-11-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for getsockopt command (SOCKET_URING_OP_GETSOCKOPT), where
level is SOL_SOCKET. This is leveraging the sockptr_t infrastructure,
where a sockptr_t is either userspace or kernel space, and handled as
such.
Differently from the getsockopt(2), the optlen field is not a userspace
pointers. In getsockopt(2), userspace provides optlen pointer, which is
overwritten by the kernel. In this implementation, userspace passes a
u32, and the new value is returned in cqe->res. I.e., optlen is not a
pointer.
Important to say that userspace needs to keep the pointer alive until
the CQE is completed.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231016134750.1381153-10-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Protect io_uring_cmd_sock() to be called if CONFIG_NET is not set. If
network is not enabled, but io_uring is, then we want to return
-EOPNOTSUPP for any possible socket operation.
This is helpful because io_uring_cmd_sock() can now call functions that
only exits if CONFIG_NET is enabled without having #ifdef CONFIG_NET
inside the function itself.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231016134750.1381153-9-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a new flag to track if the operation is running compat mode.
This basically check the context->compat and pass it to the issue_flags,
so, it could be queried later in the callbacks.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231016134750.1381153-6-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With poll triggered retries, each event trigger will cause a task_work
item to be added for processing. If the ring is setup with
IORING_SETUP_DEFER_TASKRUN and a task is waiting on multiple events to
complete, any task_work addition will wake the task for processing these
items. This can cause more context switches than we would like, if the
application is deliberately waiting on multiple items to increase
efficiency.
For example, if an application has receive multishot armed for sockets
and wants to wait for N to complete within M usec of time, we should not
be waking up and processing these items until we have all the events we
asked for. By switching the poll trigger to lazy wake, we'll process
them when they are all ready, in one swoop, rather than wake multiple
times only to process one and then go back to sleep.
At some point we probably want to look at just making the lazy wake
the default, but for now, let's just selectively enable it where it
makes sense.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While valid we don't need to open-code rcu dereferences if we're
acquiring file_lock anyway.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231010030615.GO800259@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
If we specify a valid CQ ring address but an invalid SQ ring address,
we'll correctly spot this and free the allocated pages and clear them
to NULL. However, we don't clear the ring page count, and hence will
attempt to free the pages again. We've already cleared the address of
the page array when freeing them, but we don't check for that. This
causes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Oops [#1]
Modules linked in:
CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty #56
Hardware name: ucbbar,riscvemu-bare (DT)
Workqueue: events_unbound io_ring_exit_work
epc : io_pages_free+0x2a/0x58
ra : io_rings_free+0x3a/0x50
epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0
status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d
[<ffffffff808811a2>] io_pages_free+0x2a/0x58
[<ffffffff80881406>] io_rings_free+0x3a/0x50
[<ffffffff80882176>] io_ring_exit_work+0x37e/0x424
[<ffffffff80027234>] process_one_work+0x10c/0x1f4
[<ffffffff8002756e>] worker_thread+0x252/0x31c
[<ffffffff8002f5e4>] kthread+0xc4/0xe0
[<ffffffff8000332a>] ret_from_fork+0xa/0x1c
Check for a NULL array in io_pages_free(), but also clear the page counts
when we free them to be on the safer side.
Reported-by: rtm@csail.mit.edu
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The allocation of struct io_buffer for metadata of provided buffers is
done through a custom allocator that directly gets pages and
fragments them. But, slab would do just fine, as this is not a hot path
(in fact, it is a deprecated feature) and, by keeping a custom allocator
implementation we lose benefits like tracking, poisoning,
sanitizers. Finally, the custom code is more complex and requires
keeping the list of pages in struct ctx for no good reason. This patch
cleans this path up and just uses slab.
I microbenchmarked it by forcing the allocation of a large number of
objects with the least number of io_uring commands possible (keeping
nbufs=USHRT_MAX), with and without the patch. There is a slight
increase in time spent in the allocation with slab, of course, but even
when allocating to system resources exhaustion, which is not very
realistic and happened around 1/2 billion provided buffers for me, it
wasn't a significant hit in system time. Specially if we think of a
real-world scenario, an application doing register/unregister of
provided buffers will hit ctx->io_buffers_cache more often than actually
going to slab.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nbufs tracks the number of buffers and not the last bgid. In 16-bit, we
have 2^16 valid buffers, but the check mistakenly rejects the last
bid. Let's fix it to make the interface consistent with the
documentation.
Fixes: ddf0322db7 ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 3851d25c75 ("io_uring: check for rollover of buffer ID when
providing buffers") introduced a check to prevent wrapping the BID
counter when sqe->off is provided, but it's off-by-one too
restrictive, rejecting the last possible BID (65534).
i.e., the following fails with -EINVAL.
io_uring_prep_provide_buffers(sqe, addr, size, 0xFFFF, 0, 0);
Fixes: 3851d25c75 ("io_uring: check for rollover of buffer ID when providing buffers")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On at least arm32, but presumably any arch with highmem, if the
application passes in memory that resides in highmem for the rings,
then we should fail that ring creation. We fail it with -EINVAL, which
is what kernels that don't support IORING_SETUP_NO_MMAP will do as well.
Cc: stable@vger.kernel.org
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_lockdep_assert_cq_locked() checks that locking is correctly done when
a CQE is posted. If the ring is setup in a disabled state with
IORING_SETUP_R_DISABLED, then ctx->submitter_task isn't assigned until
the ring is later enabled. We generally don't post CQEs in this state,
as no SQEs can be submitted. However it is possible to generate a CQE
if tagged resources are being updated. If this happens and PROVE_LOCKING
is enabled, then the locking check helper will dereference
ctx->submitter_task, which hasn't been set yet.
Fixup io_lockdep_assert_cq_locked() to handle this case correctly. While
at it, convert it to a static inline as well, so that generated line
offsets will actually reflect which condition failed, rather than just
the line offset for io_lockdep_assert_cq_locked() itself.
Reported-and-tested-by: syzbot+efc45d4e7ba6ab4ef1eb@syzkaller.appspotmail.com
Fixes: f26cc95935 ("io_uring: lockdep annotate CQ locking")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reports that registering a mapped buffer ring on arm32 can
trigger an OOPS. Registered buffer rings have two modes, one of them
is the application passing in the memory that the buffer ring should
reside in. Once those pages are mapped, we use page_address() to get
a virtual address. This will obviously fail on highmem pages, which
aren't mapped.
Add a check if we have any highmem pages after mapping, and fail the
attempt to register a provided buffer ring if we do. This will return
the same error as kernels that don't support provided buffer rings to
begin with.
Link: https://lore.kernel.org/io-uring/000000000000af635c0606bcb889@google.com/
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Cc: stable@vger.kernel.org
Reported-by: syzbot+2113e61b8848fa7951d8@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is overly convoluted with a goto error path, and checks
under the mmap_read_lock() that don't need to be at all. Rearrange it
a bit so the checks and errors fall out naturally, rather than needing
to jump around for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.
Fixes: cf30da90bc ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for IORING_OP_FUTEX_WAITV, which allows registering a
notification for a number of futexes at once. If one of the futexes are
woken, then the request will complete with the index of the futex that got
woken as the result. This is identical to what the normal vectored futex
waitv operation does.
Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a
pointer to a struct futex_waitv array, and sqe->off must now contain the
number of elements in that array. As flags are passed in the futex_vector
array, and likewise for the value and futex address(es), sqe->addr2
and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV.
For cancelations, FUTEX_WAITV does not rely on the futex_unqueue()
return value as we're dealing with multiple futexes. Instead, a separate
per io_uring request atomic is used to claim ownership of the request.
Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well,
but that punts a lot of the work to the application:
1) Application would need to submit N IORING_OP_FUTEX_WAIT requests,
rather than just a single IORING_OP_FUTEX_WAITV.
2) When one futex is woken, application would need to cancel the
remaining N-1 requests that didn't trigger.
While this is of course doable, having a single vectored futex wait
makes for much simpler application code.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for FUTEX_WAKE/WAIT primitives.
IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as
it does support passing in a bitset.
Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and
FUTEX_WAIT_BITSET.
For both of them, they are using the futex2 interface.
FUTEX_WAKE is straight forward, as those can always be done directly from
the io_uring submission without needing async handling. For FUTEX_WAIT,
things are a bit more complicated. If the futex isn't ready, then we
rely on a callback via futex_queue->wake() when someone wakes up the
futex. From that calback, we queue up task_work with the original task,
which will post a CQE and wake it, if necessary.
Cancelations are supported, both from the application point-of-view,
but also to be able to cancel pending waits if the ring exits before
all events have occurred. The return value of futex_unqueue() is used
to gate who wins the potential race between cancelation and futex
wakeups. Whomever gets a 'ret == 1' return from that claims ownership
of the io_uring futex request.
This is just the barebones wait/wake support. PI or REQUEUE support is
not added at this point, unclear if we might look into that later.
Likewise, explicit timeouts are not supported either. It is expected
that users that need timeouts would do so via the usual io_uring
mechanism to do that using linked timeouts.
The SQE format is as follows:
`addr` Address of futex
`fd` futex2(2) FUTEX2_* flags
`futex_flags` io_uring specific command flags. None valid now.
`addr2` Value of futex
`addr3` Mask to wake/wait
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
uring_cmd may never complete, such as ublk, in which uring cmd isn't
completed until one new block request is coming from ublk block device.
Add cancelable uring_cmd to provide mechanism to driver for cancelling
pending commands in its own way.
Add API of io_uring_cmd_mark_cancelable() for driver to mark one command as
cancelable, then io_uring will cancel this command in
io_uring_cancel_generic(). ->uring_cmd() callback is reused for canceling
command in driver's way, then driver gets notified with the cancelling
from io_uring.
Add API of io_uring_cmd_get_task() to help driver cancel handler
deal with the canceling.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like IORING_OP_READ, except:
1) It only supports pollable files (eg pipes, sockets, etc). Note that
for sockets, you probably want to use recv/recvmsg with multishot
instead.
2) It supports multishot mode, meaning it will repeatedly trigger a
read and fill a buffer when data is available. This allows similar
use to recv/recvmsg but on non-sockets, where a single request will
repeatedly post a CQE whenever data is read from it.
3) Because of #2, it must be used with provided buffers. This is
uniformly true across any request type that supports multishot and
transfers data, with the reason being that it's obviously not
possible to pass in a single buffer for the data, as multiple reads
may very well trigger before an application has a chance to process
previous CQEs and the data passed from them.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is cleaner than gating on the opcode type, particularly as more
read/write type opcodes may be added.
Then we can use that for the data import, and for __io_read() on
whether or not we need to copy state.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __io_read() which does the grunt of the work, leaving the completion
side to the new io_read(). No functional changes in this patch.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit b484a40dc1.
This commit cancels all requests with io-wq, not just the ones from the
originating task. This breaks use cases that have thread pools, or just
multiple tasks issuing requests on the same ring. The liburing
regression test for this also shows that problem:
$ test/thread-exit.t
cqe->res=-125, Expected 512
where an IO thread gets its request canceled rather than complete
successfully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a new sysctl (io_uring_disabled) which can be either 0, 1, or
2. When 0 (the default), all processes are allowed to create io_uring
instances, which is the current behavior. When 1, io_uring creation is
disabled (io_uring_setup() will fail with -EPERM) for unprivileged
processes not in the kernel.io_uring_group group. When 2, calls to
io_uring_setup() fail with -EPERM regardless of privilege.
Signed-off-by: Matteo Rizzo <matteorizzo@google.com>
[JEM: modified to add io_uring_group]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/x49y1i42j1z.fsf@segfault.boston.devel.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a ring is setup with IORING_SETUP_NO_SQARRAY, then we don't have
the SQ array. Don't try to dump info from it through fdinfo if that
is the case.
Reported-by: syzbot+216e2ea6e0bf4a0acdd7@syzkaller.appspotmail.com
Fixes: 2af89abda7 ("io_uring: add option to remove SQ indirection")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq_put_and_exit() is called from do_exit(), but all FIXED_FILE requests
in io_wq aren't canceled in io_uring_cancel_generic() called from do_exit().
Meantime io_wq IO code path may share resource with normal iopoll code
path.
So if any HIPRI request is submittd via io_wq, this request may not get resouce
for moving on, given iopoll isn't possible in io_wq_put_and_exit().
The issue can be triggered when terminating 't/io_uring -n4 /dev/nullb0'
with default null_blk parameters.
Fix it by always cancelling all requests in io_wq by adding helper of
io_uring_cancel_wq(), and this way is reasonable because io_wq destroying
follows canceling requests immediately.
Closes: https://lore.kernel.org/linux-block/3893581.1691785261@warthog.procyon.org.uk/
Reported-by: David Howells <dhowells@redhat.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230901134916.2415386-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=XS+G
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Fairly quiet round in terms of features, mostly just improvements all
over the map for existing code. In detail:
- Initial support for socket operations through io_uring. Latter half
of this will likely land with the 6.7 kernel, then allowing things
like get/setsockopt (Breno)
- Cleanup of the cancel code, and then adding support for canceling
requests with the opcode as the key (me)
- Improvements for the io-wq locking (me)
- Fix affinity setting for SQPOLL based io-wq (me)
- Remove the io_uring userspace code. These were added initially as
copies from liburing, but all of them have since bitrotted and are
way out of date at this point. Rather than attempt to keep them in
sync, just get rid of them. People will have liburing available
anyway for these examples. (Pavel)
- Series improving the CQ/SQ ring caching (Pavel)
- Misc fixes and cleanups (Pavel, Yue, me)"
* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
io_uring: move iopoll ctx fields around
io_uring: move multishot cqe cache in ctx
io_uring: separate task_work/waiting cache line
io_uring: banish non-hot data to end of io_ring_ctx
io_uring: move non aligned field to the end
io_uring: add option to remove SQ indirection
io_uring: compact SQ/CQ heads/tails
io_uring: force inline io_fill_cqe_req
io_uring: merge iopoll and normal completion paths
io_uring: reorder cqring_flush and wakeups
io_uring: optimise extra io_get_cqe null check
io_uring: refactor __io_get_cqe()
io_uring: simplify big_cqe handling
io_uring: cqe init hardening
io_uring: improve cqe !tracing hot path
io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
io_uring: simplify io_run_task_work_sig return
io_uring/rsrc: keep one global dummy_ubuf
io_uring: never overflow io_aux_cqe
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
* Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
* Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in a
(potentially) multi-megabyte writeback IO.
* Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZM0Z1AAKCRBKO3ySh0YR
pp7BAQCzkKejCM0185tNIH/faHjzidSisNQkJ5HoB4Opq9U66AEA6IPuAdlPlM/J
FPW1oPq33Yn7AV4wXjUNFfDLzVb/Fgg=
=dFBU
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"We've got some big changes for this release -- I'm very happy to be
landing willy's work to enable large folios for the page cache for
general read and write IOs when the fs can make contiguous space
allocations, and Ritesh's work to track sub-folio dirty state to
eliminate the write amplification problems inherent in using large
folios.
As a bonus, io_uring can now process write completions in the caller's
context instead of bouncing through a workqueue, which should reduce
io latency dramatically. IOWs, XFS should see a nice performance bump
for both IO paths.
Summary:
- Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
- Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in
a (potentially) multi-megabyte writeback IO.
- Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests"
* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
iomap: Add per-block dirty state tracking to improve performance
iomap: Allocate ifs in ->write_begin() early
iomap: Refactor iomap_write_delalloc_punch() function out
iomap: Use iomap_punch_t typedef
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
iomap: Add some uptodate state handling helpers for ifs state bitmap
iomap: Drop ifs argument from iomap_set_range_uptodate()
iomap: Rename iomap_page to iomap_folio_state and others
iomap: Copy larger chunks from userspace
iomap: Create large folios in the buffered write path
filemap: Allow __filemap_get_folio to allocate large folios
filemap: Add fgf_t typedef
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTxQAKCRCRxhvAZXjc
okaVAP94WAlItvDRt/z2Wtzf0+RqPZeTXEdGTxua8+RxqCyYIQD+OO5nRfKQPHlV
AqqGJMKItQMSMIYgB5ftqVhNWZfnHgM=
=pSEW
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
We cache multishot CQEs before flushing them to the CQ in
submit_state.cqe. It's a 16 entry cache totalling 256 bytes in the
middle of the io_submit_state structure. Move it out of there, it
should help with CPU caches for the submission state, and shouldn't
affect cached CQEs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dbe1f39c043ee23da918836be44fcec252ce6711.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not many aware, but io_uring submission queue has two levels. The first
level usually appears as sq_array and stores indexes into the actual SQ.
To my knowledge, no one has ever seriously used it, nor liburing exposes
it to users. Add IORING_SETUP_NO_SQARRAY, when set we don't bother
creating and using the sq_array and SQ heads/tails will be pointing
directly into the SQ. Improves memory footprint, in term of both
allocations as well as cache usage, and also should make io_get_sqe()
less branchy in the end.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0ffa3268a5ef61d326201ff43a233315c96312e0.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_do_iopoll() and io_submit_flush_completions() are pretty similar,
both filling CQEs and then free a list of requests. Don't duplicate it
and make iopoll use __io_submit_flush_completions(), which also helps
with inlining and other optimisations.
For that, we need to first find all completed iopoll requests and splice
them from the iopoll list and then pass it down. This adds one extra
list traversal, which should be fine as requests will stay hot in cache.
CQ locking is already conditional, introduce ->lockless_cq and skip
locking for IOPOLL as it's protected by ->uring_lock.
We also add a wakeup optimisation for IOPOLL to __io_cq_unlock_post(),
so it works just like io_cqring_ev_posted_iopoll().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3840473f5e8a960de35b77292026691880f6bdbc.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unlike in the past, io_commit_cqring_flush() doesn't do anything that
may need io_cqring_wake() to be issued after, all requests it completes
will go via task_work. Do io_commit_cqring_flush() after
io_cqring_wake() to clean up __io_cq_unlock_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed32dcfeec47e6c97bd6b18c152ddce5b218403f.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the cached cqe check passes in io_get_cqe*() it already means that
the cqe we return is valid and non-zero, however the compiler is unable
to optimise null checks like in io_fill_cqe_req().
Do a bit of trickery, return success/fail boolean from io_get_cqe*()
and store cqe in the cqe parameter. That makes it do the right thing,
erasing the check together with the introduced indirection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/322ea4d3377d3d4efd8ae90ab8ed28a99f518210.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb::cqe stores the completion info which we'll memcpy to
userspace, and we rely on callbacks and other later steps to populate
it with right values. We have never had problems with that, but it would
still be safer to zero it on allocation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b16a3b64dde678686460d3c3792c3ba6d3d1bc7a.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While looking at io_fill_cqe_req()'s asm I stumbled on our trace points
turning into the chunk below:
trace_io_uring_complete(req->ctx, req, req->cqe.user_data,
req->cqe.res, req->cqe.flags,
req->extra1, req->extra2);
io_uring/io_uring.c:898: trace_io_uring_complete(req->ctx, req, req->cqe.user_data,
movq 232(%rbx), %rdi # req_44(D)->big_cqe.extra2, _5
movq 224(%rbx), %rdx # req_44(D)->big_cqe.extra1, _6
movl 84(%rbx), %r9d # req_44(D)->cqe.D.81184.flags, _7
movl 80(%rbx), %r8d # req_44(D)->cqe.res, _8
movq 72(%rbx), %rcx # req_44(D)->cqe.user_data, _9
movq 88(%rbx), %rsi # req_44(D)->ctx, _10
./arch/x86/include/asm/jump_label.h:27: asm_volatile_goto("1:"
1:jmp .L1772 # objtool NOPs this #
...
It does a jump_label for actual tracing, but those 6 moves will stay
there in the hottest io_uring path. As an optimisation, add a
trace_io_uring_complete_enabled() check, which is also uses jump_labels,
it tricks the compiler into behaving. It removes the junk without
changing anything else int the hot path.
Note: apparently, it's not only me noticing it, and people are also
working it around. We should remove the check when it's solved
generically or rework tracing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/555d8312644b3776f4be7e23f9b92943875c4bc7.1692916914.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Patch series "Remove _folio_dtor and _folio_order", v2.
This patch (of 13):
folio_put() is the standard way to write this, and it's not appreciably
slower. This is an enabling patch for removing free_compound_page()
entirely.
Link: https://lkml.kernel.org/r/20230816151201.3655946-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230816151201.3655946-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-5-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This helper does not take a kiocb as input and we want to create a
common helper by that name that takes a kiocb as input.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct io_mapped_ubuf.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: io-uring@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230817212146.never.853-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we setup the ring with SQPOLL, then that polling thread has its
own io-wq setup. This means that if the application uses
IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be
setting it for the invoking task, but rather the sqpoll task.
Add an sqpoll helper that parks the thread and updates the affinity,
and use that one if we're using SQPOLL.
Fixes: fe76421d1d ("io_uring: allow user configurable IO thread CPU affinity")
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/884
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We set empty registered buffers to dummy_ubuf as an optimisation.
Currently, we allocate the dummy entry for each ring, whenever we can
simply have one global instance.
We're casting out const on assignment, it's fine as we're not going to
change the content of the dummy, the constness gives us an extra layer
of protection if sth ever goes wrong.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4a96dda35ab755914bc43f6781bba0df97ac489.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now all callers of io_aux_cqe() set allow_overflow to false, remove the
parameter and not allow overflowing auxilary multishot cqes.
When CQ is full the function callers and all multishot requests in
general are expected to complete the request. That prevents indefinite
in-background grows of the overflow list and let's the userspace to
handle the backlog at its own pace.
Resubmitting a request should also be faster than accounting a bunch of
overflows, so it should be better for perf when it happens, but a well
behaving userspace should be trying to avoid overflows in any case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bb20d14d708ea174721e58bb53786b0521e4dd6d.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All we really care about is finding a free worker. If said worker is
already running, it's either starting new work already or it's just
finishing up existing work. For the latter, we'll be finding this work
item next anyway, and for the former, if the worker does go to sleep,
it'll create a new worker anyway as we have pending items.
This reduces try_to_wake_up() overhead considerably:
23.16% -10.46% [kernel.kallsyms] [k] try_to_wake_up
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we check if we have work to run, we grab the acct lock, check,
drop it, and then return the result. If we do have work to run, then
running the work will again grab acct->lock and get the work item.
This causes us to grab acct->lock more frequently than we need to.
If we have work to do, have io_acct_run_queue() return with the acct
lock still acquired. io_worker_handle_work() is then always invoked
with the acct lock already held.
In a simple test cases that stats files (IORING_OP_STATX always hits
io-wq), we see a nice reduction in locking overhead with this change:
19.32% -12.55% [kernel.kallsyms] [k] __cmpwait_case_32
20.90% -12.07% [kernel.kallsyms] [k] queued_spin_lock_slowpath
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The worker free list is RCU protected, and checks for workers going away
when iterating it. There's no need to hold the wq->lock around the
lookup.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never use io_move_task_work_from_local() before it's defined in the
file anyway, so kill the forward declaration.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The caller holds a reference to the ring itself, so by definition
the ring cannot go away. There's no need to play games with tryget
for the reference, as we don't need an extra reference at all.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We return 0 for success, or -error when there's an error. Move the 'ret'
variable into the loop where we are actually using it, to make it
clearer that we don't carry this variable forward for return outside of
the loop.
While at it, also move the need_resched() break condition out of the
while check itself, keeping it with the signal pending check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_local_work_add() peeks into the work list, which can be executed
in the meanwhile. It's completely fine without KASAN as we're in an RCU
read section and it's SLAB_TYPESAFE_BY_RCU. With KASAN though it may
trigger a false positive warning because internal io_uring caches are
sanitised.
Remove sanitisation from the io_uring request cache for now.
Cc: stable@vger.kernel.org
Fixes: 8751d15426 ("io_uring: reduce scheduling due to tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c6fbf7a82a341e66a0007c76eefd9d57f2d3ba51.1691541473.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cq_extra is protected by ->completion_lock, which io_get_sqe() misses.
The bug is harmless as it doesn't happen in real life, requires invalid
SQ index array and racing with submission, and only messes up the
userspace, i.e. stall requests execution but will be cleaned up on
ring destruction.
Fixes: 15641e4270 ("io_uring: don't cache number of dropped SQEs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66096d54651b1a60534bb2023f2947f09f50ef73.1691538547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable io_uring commands on network sockets. Create two new
SOCKET_URING_OP commands that will operate on sockets.
In order to call ioctl on sockets, use the file_operations->io_uring_cmd
callbacks, and map it to a uring socket function, which handles the
SOCKET_URING_OP accordingly, and calls socket ioctls.
This patches was tested by creating a new test case in liburing.
Link: https://github.com/leitao/liburing/tree/io_uring_cmd
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230627134424.2784797-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The changes from commit 32832a407a ("io_uring: Fix io_uring mmap() by
using architecture-provided get_unmapped_area()") to the parisc
implementation of get_unmapped_area() broke glibc's locale-gen
executable when running on parisc.
This patch reverts those architecture-specific changes, and instead
adjusts in io_uring_mmu_get_unmapped_area() the pgoff offset which is
then given to parisc's get_unmapped_area() function. This is much
cleaner than the previous approach, and we still will get a coherent
addresss.
This patch has no effect on other architectures (SHM_COLOUR is only
defined on parisc), and the liburing testcase stil passes on parisc.
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Fixes: 32832a407a ("io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()")
Fixes: d808459b2e ("io_uring: Adjust mapping wrt architecture aliasing requirements")
Link: https://lore.kernel.org/r/ZNEyGV0jyI8kOOfz@p100
Signed-off-by: Jens Axboe <axboe@kernel.dk>
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
check for whether RESOLVE_CACHED can be used would incorrectly think
that O_DIRECTORY could not be used with RESOLVE_CACHED.
Cc: stable@vger.kernel.org # v5.12+
Fixes: 3a81fd0204 ("io_uring: enable LOOKUP_CACHED path resolution for filename lookups")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20230807-resolve_cached-o_tmpfile-v3-1-e49323e1ef6f@cyphar.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iomap always punts async dio write completions to a workqueue, which has
a cost in terms of efficiency (now you need an unrelated worker to
process it) and latency (now you're bouncing a completion through an
async worker, which is a classic slowdown scenario).
io_uring handles IRQ completions via task_work, and for writes that
don't need to do extra IO at completion time, we can safely complete
them inline from that. This patchset adds IOCB_DIO_CALLER_COMP, which an
IO issuer can set to inform the completion side that any extra work that
needs doing for that completion can be punted to a safe task context.
The iomap dio completion will happen in hard/soft irq context, and we
need a saner context to process these completions. IOCB_DIO_CALLER_COMP
is added, which can be set in a struct kiocb->ki_flags by the issuer. If
the completion side of the iocb handling understands this flag, it can
choose to set a kiocb->dio_complete() handler and just call ki_complete
from IRQ context. The issuer must then ensure that this callback is
processed from a task. io_uring punts IRQ completions to task_work
already, so it's trivial wire it up to run more of the completion before
posting a CQE. This is good for up to a 37% improvement in
throughput/latency for low queue depth IO, patch 5 has the details.
If we need to do real work at completion time, iomap will clear the
IOMAP_DIO_CALLER_COMP flag.
This work came about when Andres tested low queue depth dio writes for
postgres and compared it to doing sync dio writes, showing that the
async processing slows us down a lot.
-----BEGIN PGP SIGNATURE-----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=EnSA
-----END PGP SIGNATURE-----
Merge tag 'xfs-async-dio.6-2023-08-01' of git://git.kernel.dk/linux into iomap-6.6-mergeA
Improve iomap/xfs async dio write performance
iomap always punts async dio write completions to a workqueue, which has
a cost in terms of efficiency (now you need an unrelated worker to
process it) and latency (now you're bouncing a completion through an
async worker, which is a classic slowdown scenario).
io_uring handles IRQ completions via task_work, and for writes that
don't need to do extra IO at completion time, we can safely complete
them inline from that. This patchset adds IOCB_DIO_CALLER_COMP, which an
IO issuer can set to inform the completion side that any extra work that
needs doing for that completion can be punted to a safe task context.
The iomap dio completion will happen in hard/soft irq context, and we
need a saner context to process these completions. IOCB_DIO_CALLER_COMP
is added, which can be set in a struct kiocb->ki_flags by the issuer. If
the completion side of the iocb handling understands this flag, it can
choose to set a kiocb->dio_complete() handler and just call ki_complete
from IRQ context. The issuer must then ensure that this callback is
processed from a task. io_uring punts IRQ completions to task_work
already, so it's trivial wire it up to run more of the completion before
posting a CQE. This is good for up to a 37% improvement in
throughput/latency for low queue depth IO, patch 5 has the details.
If we need to do real work at completion time, iomap will clear the
IOMAP_DIO_CALLER_COMP flag.
This work came about when Andres tested low queue depth dio writes for
postgres and compared it to doing sync dio writes, showing that the
async processing slows us down a lot.
* tag 'xfs-async-dio.6-2023-08-01' of git://git.kernel.dk/linux:
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the filesystem dio handler understands IOCB_DIO_CALLER_COMP, we'll
get a kiocb->ki_complete() callback with kiocb->dio_complete set. In
that case, rather than complete the IO directly through task_work, queue
up an intermediate task_work handler that first processes this callback
and then immediately completes the request.
For XFS, this avoids a punt through a workqueue, which is a lot less
efficient and adds latency to lower queue depth (or sync) O_DIRECT
writes.
Only do this for non-polled IO, as polled IO doesn't need this kind
of deferral as it always completes within the task itself. This then
avoids a check for deferral in the polled IO completion handler.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=+ctz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a single tweak to a patch from last week, to avoid having idle
cqring waits be attributed as iowait"
* tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linux:
io_uring: gate iowait schedule on having pending requests
A previous commit made all cqring waits marked as iowait, as a way to
improve performance for short schedules with pending IO. However, for
use cases that have a special reaper thread that does nothing but
wait on events on the ring, this causes a cosmetic issue where we
know have one core marked as being "busy" with 100% iowait.
While this isn't a grave issue, it is confusing to users. Rather than
always mark us as being in iowait, gate setting of current->in_iowait
to 1 by whether or not the waiting task has pending requests.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/io-uring/CAMEGJJ2RxopfNQ7GNLhr7X9=bHXKo+G5OOe0LUq=+UgLXsv1Xg@mail.gmail.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217699
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217700
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Tested-by: Andres Freund <andres@anarazel.de>
Fixes: 8a796565ce ("io_uring: Use io_schedule* in cqring wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
