Commit Graph

1083 Commits

Author SHA1 Message Date
Dave Airlie
995c376e89 Merge branch 'mullins' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
Add Mullins chips support.

* 'mullins' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: add pci ids for Mullins
  drm/radeon: add Mullins VCE support
  drm/radeon: modesetting updates for Mullins.
  drm/radeon: dpm updates for KV/KB
  drm/radeon: add Mullins dpm support.
  drm/radeon: add Mullins UVD support.
  drm/radeon: update cik init for Mullins.
  drm/radeon: add Mullins chip family
2014-05-07 09:10:28 +10:00
Samuel Li
573471c137 drm/radeon: add pci ids for Mullins
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06 12:20:06 +02:00
Paulo Zanoni
9bbfd20abe drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
Because the docs say ULX doesn't support it on HSW.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-04-30 09:46:51 +03:00
Dave Airlie
a42892ed10 Merge branch 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux into drm-next
Some i2c fixes over DisplayPort.

* 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: Improve vramlimit module param documentation
  drm/radeon: fix audio pin counts for DCE6+ (v2)
  drm/radeon/dp: switch to the common i2c over aux code
  drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)
  drm/dp/i2c: send bare addresses to properly reset i2c connections (v4)
  drm/radeon/dp: handle zero sized i2c over aux transactions (v2)
  drm/i915: support address only i2c-over-aux transactions
  drm/tegra: dp: Support address-only I2C-over-AUX transactions
2014-04-19 11:16:02 +10:00
Daniel Vetter
8d75454420 drm: Split out drm_probe_helper.c from drm_crtc_helper.c
This is leftover stuff from my previous doc round which I kinda wanted
to do but didn't yet due to rebase hell.

The modeset helpers and the probing helpers a independent and e.g.
i915 uses the probing stuff but has its own modeset infrastructure. It
hence makes to split this up. While at it add a DOC: comment for the
probing libraray.

It would be rather neat to pull some of the DocBook documenting these
two helpers into in-line DOC: comments. But unfortunately kerneldoc
doesn't support markdown or something similar to make nice-looking
documentation, so the current state is better.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-18 13:21:17 +10:00
Linus Torvalds
40e9963e62 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pullx86 core platform updates from Peter Anvin:
 "This is the x86/platform branch with the objectionable IOSF patches
  removed.

  What is left is proper memory handling for Intel GPUs, and a change to
  the Calgary IOMMU code which will be required to make kexec work
  sanely on those platforms after some upcoming kexec changes"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, calgary: Use 8M TCE table size by default
  x86/gpu: Print the Intel graphics stolen memory range
  x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms
  x86/gpu: Add vfunc for Intel graphics stolen memory base address
2014-04-11 12:04:15 -07:00
Linus Torvalds
e9f37d3a8d Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
2014-04-08 09:52:16 -07:00
Alex Deucher
732d50b431 drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)
If you are using the common dp over i2c functionality, it is
asumed that the aux transfer function does not modify the any
of the msg structure other than the reply field.  Doing so
breaks the logic in the common code.

v2: update struct drm_dp_aux comments about assumptions
v3 (chk): rebased on upstream changes

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-08 16:12:39 +02:00
Dave Airlie
13b9389274 Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Summaries:
- Add MIPI-DSI Driver, and dt bindigs
- Add S6E8AA0 MIPI-DSI based panel drivers, and dt bindings
- Add LD9040 parallel panel driver
 . this driver is placed in drivers/gpu/drm/panel, and it seems
   to be used for exynos drm as of now,
- Some fixups

Changelog v2:
- Remove super device support, and relevant dt bindings for more reviews.
- Fix module build errors you pointed out.
- Re-based it to drm-next again.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
2014-04-05 16:09:15 +10:00
Dave Airlie
8d51a977a4 Merge tag 'ttm-next-2014-04-04' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2014-04-04

Currently only a single patch fixing up mixed use of the ttm_bo_reserve and
ww_mutex APIs

* tag 'ttm-next-2014-04-04' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Hide the implementation details of reservation
2014-04-05 16:07:39 +10:00
Andrzej Hajda
1d96d4a677 drm/mipi_dsi: add flags to DSI messages
This patch adds flags field to mipi_dsi_msg structure and two flags:
- MIPI_DSI_MSG_REQ_ACK - request ACK from peripheral for given message,
- MIPI_DSI_MSG_USE_LPM - use Low Power Mode to transmit message.
The first flag is usually helpful during DSI diagnostic, the second
flag is required by some peripherals during configuration phase.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:47 +09:00
Thomas Hellstrom
c75230833c drm/ttm: Hide the implementation details of reservation
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-04-04 08:00:59 +02:00
Shawn Guo
740c22ae51 drm/cma: include <drm/drmP.h> as needed
The following error and warnings will be seen when compiling a C file
which includes <drm/drm_gem_cma_helper.h> but without <drm/drmP.h>
being included before.

include/drm/drm_gem_cma_helper.h:5:24: error: field ‘base’ has incomplete type
include/drm/drm_gem_cma_helper.h: In function ‘to_drm_gem_cma_obj’:
include/drm/drm_gem_cma_helper.h:16:9: warning: initialization from incompatible pointer type [enabled by default]
include/drm/drm_gem_cma_helper.h: At top level:
include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_mode_create_dumb’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:24:34: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_device’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:24:34: warning: ‘struct drm_file’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:28:10: warning: ‘struct drm_device’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:28:10: warning: ‘struct drm_file’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:35:3: warning: ‘struct drm_device’ declared inside parameter list [enabled by default]
include/drm/drm_gem_cma_helper.h:46:14: warning: ‘struct drm_device’ declared inside parameter list [enabled by default]

Fix them by including <drm/drmP.h> in drm_gem_cma_helper.h.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-04 10:07:57 +10:00
Lauri Kasanen
62347f9e0f drm: Add support for two-ended allocation, v3
Clients like i915 need to segregate cache domains within the GTT which
can lead to small amounts of fragmentation. By allocating the uncached
buffers from the bottom and the cacheable buffers from the top, we can
reduce the amount of wasted space and also optimize allocation of the
mappable portion of the GTT to only those buffers that require CPU
access through the GTT.

For other drivers, allocating small bos from one end and large ones
from the other helps improve the quality of fragmentation.

Based on drm_mm work by Chris Wilson.

v3: Changed to use a TTM placement flag
v2: Updated kerneldoc

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Christian König <deathsimple@vodafone.de>
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: David Airlie <airlied@redhat.com>
2014-04-04 09:28:14 +10:00
Linus Torvalds
159d8133d0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()
2014-04-02 16:23:38 -07:00
Dave Airlie
66e514c14a Merge tag 'drm-intel-next-2014-03-21' of git://anongit.freedesktop.org/drm-intel into drm-next
- Inherit/reuse firmwar framebuffers (for real this time) from Jesse, less
  flicker for fastbooting.
- More flexible cloning for hdmi (Ville).
- Some PPGTT fixes from Ben.
- Ring init fixes from Naresh Kumar.
- set_cache_level regression fixes for the vma conversion from Ville&Chris.
- Conversion to the new dp aux helpers (Jani).
- Unification of runtime pm with pc8 support from Paulo, prep work for runtime
  pm on other platforms than HSW.
- Larger cursor sizes (Sagar Kamble).
- Piles of improvements and fixes all over, as usual.

* tag 'drm-intel-next-2014-03-21' of git://anongit.freedesktop.org/drm-intel: (75 commits)
  drm/i915: Include a note about the dangers of I915_READ64/I915_WRITE64
  drm/i915/sdvo: fix questionable return value check
  drm/i915: Fix unsafe loop iteration over vma whilst unbinding them
  drm/i915: Enabling 128x128 and 256x256 ARGB Cursor Support
  drm/i915: Print how many objects are shared in per-process stats
  drm/i915: Per-process stats work better when evaluated per-process
  drm/i915: remove rps local variables
  drm/i915: Remove extraneous MMIO for RPS
  drm/i915: Rename and comment all the RPS *stuff*
  drm/i915: Store the HW min frequency as min_freq
  drm/i915: Fix coding style for RPS
  drm/i915: Reorganize the overclock code
  drm/i915: init pm.suspended earlier
  drm/i915: update the PC8 and runtime PM documentation
  drm/i915: rename __hsw_do_{en, dis}able_pc8
  drm/i915: kill struct i915_package_c8
  drm/i915: move pc8.irqs_disabled to pm.irqs_disabled
  drm/i915: remove dev_priv->pc8.enabled
  drm/i915: don't get/put PC8 when getting/putting power wells
  drm/i915: make intel_aux_display_runtime_get get runtime PM, not PC8
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_dp.c
2014-04-03 07:51:54 +10:00
Matt Roper
681e7ec730 drm: Allow userspace to ask for universal plane list (v2)
Userspace clients which wish to receive all DRM planes (primary and
cursor planes in addition to the traditional overlay planes) may set the
DRM_CLIENT_CAP_UNIVERSAL_PLANES capability.

v2: Hide behind drm.universal_planes module option [suggested by
    Daniel Vetter]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:29 -04:00
Matt Roper
780f598471 drm: Remove unused drm_crtc->fb
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:28 -04:00
Matt Roper
e13161af80 drm: Add drm_crtc_init_with_planes() (v2)
Add a new drm_crtc_init_with_planes() to allow drivers to provide
specific primary and cursor planes at CRTC initialization.  The existing
drm_crtc_init() interface remains to avoid driver churn in existing
drivers; it will initialize the CRTC with a plane helper-created primary
plane and no cursor plane.

v2:
  - Move drm_crtc_init() to plane helper file so that nothing in the DRM
    core depends on helpers.  [suggested by Daniel Vetter]
  - Keep cursor parameter to drm_crtc_init_with_planes() a void* until
    we actually add cursor support.  [suggested by Daniel Vetter]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:27 -04:00
Rob Clark
9922ab5a7e drm: Add plane type property (v2)
Add a plane type property to allow userspace to distinguish plane types.

v2: Driver-specific churn eliminated now that drm_plane_init() and
    drm_universal_plane_init() were separated out in a previous patch.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:16 -04:00
Matt Roper
dc415ff97d drm: Add drm_universal_plane_init()
Add a new plane initialization interface for universal plane support
that allows a specific plane type (primary, cursor, or overlay) to
be specified.

drm_plane_init() remains as a compatibility API to reduce churn in
existing drivers.  The 'bool priv' parameter has been changed to
'bool is_primary' under the assumption that all existing uses of
private planes were representing primary planes.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:08 -04:00
Matt Roper
c103d1cfb3 drm: Add primary plane helpers (v3)
When we expose non-overlay planes to userspace, they will become
accessible via standard userspace plane API's.  We should be able to
handle the standard plane operations against primary planes in a generic
way via the modeset handler.

Drivers that can program primary planes more efficiently, that want to
use their own primary plane structure to track additional information,
or that don't have the limitations assumed by the helpers are free to
provide their own implementation of some or all of these handlers.

v3: Tweak kerneldoc formatting slightly to avoid ugliness
v2:
 - Move plane helpers to a new file (drm_plane_helper.c)
 - Tighten checks on update handler (check for scaling, CRTC coverage,
   subpixel positioning)
 - Pass proper panning parameters to modeset interface
 - Disallow disabling primary plane (and thus CRTC) if other planes are
   still active on the CRTC.
 - Use a minimal format list that should work on all hardware/drivers.
   Drivers may call this function with a more accurate plane list to
   enable additional formats they can support.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:11:28 -04:00
Matt Roper
af93629d15 drm: Make drm_crtc_check_viewport non-static
This function will be used by the universal plane helpers and may also
be useful for individual drivers.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:11:28 -04:00
Matt Roper
e27dde3e1c drm: Add support for multiple plane types (v2)
The DRM core currently only tracks "overlay"-style planes.  Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.

v2: Add drm_for_each_legacy_plane() iterator to smooth transition
    of drivers with plane loops.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 19:13:07 -04:00
Thomas Hellstrom
0d3215e385 drm/ttm: Add a ttm_ref_object_exists function
A function to be used to check whether a caller has put a ref object
(opened) a struct ttm_base_object

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-28 14:19:03 +01:00
Thomas Hellstrom
4beb6d9fa6 drm: Add a function to get the ioctl flags
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-28 14:19:02 +01:00
Thomas Hellstrom
c996fd0b95 drm: Protect the master management with a drm_device::master_mutex v3
The master management was previously protected by the drm_device::struct_mutex.
In order to avoid locking order violations in a reworked dropped master
security check in the vmwgfx driver, break it out into a separate master_mutex.
Locking order is master_mutex -> struct_mutex.

Also remove drm_master::blocked since it's not used.

v2: Add an inline comment about what drm_device::master_mutex is protecting.
v3: Remove unneeded struct_mutex locks. Fix error returns in
    drm_setmaster_ioctl().

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
2014-03-28 14:19:02 +01:00
Thomas Hellstrom
a12cd0025c drm: Remove the minor master list
It doesn't appear to be used anywhere.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:02 +01:00
Thomas Hellstrom
436830571e drm: Improve on minor type helpers v3
Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.

v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2014-03-28 14:19:01 +01:00
Thomas Hellstrom
ac05dbc57e drm: Make control nodes master-less v3
Like for render-nodes, there is no point in maintaining the master concept
for control nodes, so set the struct drm_file::master pointer to NULL.

At the same time, make sure DRM_MASTER | DRM_CONTROL_ALLOW ioctls are always
allowed when called through the control node. Previously the caller also
needed to be master.

v2: Adapt to refactoring of ioctl permission check.
v3: Formatting of logical expression. Use drm_is_control_client() instead of
    drm_is_control().

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-28 14:19:01 +01:00
Lespiau, Damien
1287aa903f drm: Remove the prefix argument of drm_ut_debug_printk()
This is always DRM_NAME, so we can just make it part of the format
string instead of asking prink to do it for us.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:45 +10:00
Lespiau, Damien
a73d4e91fb drm: Pull the test on drm_debug in the logging macros
In the logging code, we are currently checking is we need to output in
drm_ut_debug_printk(). This is too late. The problem is that when we write
something like:

    DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
                     connector->base.id,
                     drm_get_connector_name(connector),
                     connector->encoder->base.id,
                     drm_get_encoder_name(connector->encoder));

We start by evaluating the arguments (so call drm_get_connector_name() and
drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will
then does nothing.

This means we execute a lot of instructions (drm_get_connector_name(), in turn,
calls snprintf() for example) to happily discard them in the normal case,
drm.debug=0.

So, let's put the test on drm_debug earlier, in the macros themselves.
Sprinkle an unlikely() as well for good measure.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:36 +10:00
Lespiau, Damien
8fa6a9e7e2 drm: Remove the now unused DRM_LOG* macros
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:15 +10:00
Lespiau, Damien
98a48237f4 drm: Remove the unused (and unusable) DRM_LOG_MODE()
This macro was trying to use the non existing DRM_UT_MODE debug category
and looks like it should be covered by DRM_LOG_KMS().

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:57:01 +10:00
Lespiau, Damien
1414b76c1e drm: Refresh the explanation of debug categories
That comment wasn't super-readable, so I tried to improve it:

- Put the comment before the values it's documenting
- Add a mention to PRIME
- Reword things a bit to be a lighter read
- Add a note about the option to set the debug value at run-time

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-28 12:56:59 +10:00
Dave Airlie
63ac07cdee drm/bridge/ptn3460: fix modular build
This failed to build =m, quick fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24 09:21:15 +10:00
Sean Paul
a9fe713d7d drm/bridge: Add PTN3460 bridge driver
This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00
Dave Airlie
55004938f4 Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next
Summary of what's included:

- SGX MMU support
- SGX IRQ handling (Page faults and blitter fences)
- Minor Cedarview and Poulsbo unification
- Work queue for ASLE interrupt work
- Various cleanups, style fixes and removal of dead code

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500: remove stub .open/postclose
  drm/gma500: Code cleanup - inline documentation
  drm/gma500: Code cleanup - style fixes
  drm/gma500: Code cleanup - removal of centralized exiting of function
  drm/gma500/cdv: Cedarview display cleanups
  drm/gma500: Unify encoder mode fixup
  drm/gma500: Unify _get_core_freq for cdv and psb
  drm/gma500: Move asle interrupt work into a work task
  drm/gma500: Remove dead code
  drm/gma500: Add backing type and base align to psb_gem_create()
  drm/gma500: Remove unused ioctls
  drm/gma500: Always trap MMU page faults
  drm/gma500: Hook up the MMU
  drm/gma500: Add first piece of blitter code
  drm/gma500: Give MMU code it's own header file
  drm/gma500: Add support for SGX interrupts
  drm/gma500: Make SGX MMU driver actually do something
2014-03-21 09:27:07 +10:00
Jani Nikula
9dc4056026 drm/dp: let drivers specify the name of the I2C-over-AUX adapter
Let the drivers specify the name of the I2C-over-AUX adapter to maintain
backwards compatibility in the sysfs when converting to the new
I2C-over-AUX helper infrastructure.

The i915 driver currently uses DPDDC-A to DPDDC-D as names for the DP
i2c adapters. These names show up in the i2c sysfs name attribute. We'd
like to be able to maintain that when switching over to the new helpers.

Due to i2c device and connector cleanup ordering issues we also recently
made the drm device (instead of connector) the parent of the i2c
adapters:

commit 80f65de3c9
Author: Imre Deak <imre.deak@intel.com>
Date:   Tue Feb 11 17:12:49 2014 +0200

    drm/i915: dp: fix order of dp aux i2c device cleanup

With the name picked up from the adapter parent using dev_name(), it
would be the same for all i2c adapters with the current I2C-over-AUX
helpers.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-18 10:53:14 +01:00
Dave Airlie
d1583c9997 Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into drm-next
This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.

* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
  drm: init TTM dev_mapping in ttm_bo_device_init()
  drm: use anon-inode instead of relying on cdevs
  drm: add pseudo filesystem for shared inodes
2014-03-18 19:17:02 +10:00
Dave Airlie
978c605016 Merge branch 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm into drm-next
Here's my drm documentation update and driver api polish pull request.
Alex reviewed the entire pile, I've applied a little bit of spelling
polish in a few places since then and otherwise the Usual Suspects (David,
Rob, ...) don't seem up to have another look at it (I've poked them on
irc). So I think it's as good as it gets ;-)

Note that I've dropped the final imx breaker patch since that's blocked on
imx getting sane. Once that's landed I'll ping you to pick up that
straggler.

* 'drm-docs' of ssh://people.freedesktop.org/~danvet/drm: (34 commits)
  drm/imx: remove drm_mode_connector_detach_encoder harder
  drm: kerneldoc polish for drm_crtc.c
  drm: kerneldoc polish for drm_crtc_helper.c
  drm: drop error code for drm_helper_resume_force_mode
  drm/crtc-helper: remove LOCKING from kerneldoc
  drm: remove return value from drm_helper_mode_fill_fb_struct
  drm/doc: Fix misplaced </para>
  drm: remove drm_display_mode->private_size
  drm: polish function kerneldoc for drm_modes.[hc]
  drm/modes: drop maxPitch from drm_mode_validate_size
  drm/modes: drop return value from drm_display_mode_from_videomode
  drm/modes: remove drm_mode_height/width
  drm: extract drm_modes.h for drm_crtc.h functions
  drm: move drm_mode related functions into drm_modes.c
  drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
  drm/doc: Integrate drm_modes.c kerneldoc
  drm/kms: rip out drm_mode_connector_detach_encoder
  drm/doc: Add function reference documentation for drm_mm.c
  drm/doc: Overview documentation for drm_mm.c
  drm/mm: Remove MM_UNUSED_TARGET
  ...
2014-03-18 19:09:10 +10:00
Patrik Jakobsson
ae0b931881 drm/gma500: Remove unused ioctls
All of these ioctls are unused and most of them just duplicate what drm
already provides.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17 20:11:57 +01:00
David Herrmann
07b48c3ac5 Merge branch 'drm-minor' into drm-next
Fix minor conflicts with drm-anon:
 - allocation/free order
 - drm_device header cleanups
2014-03-16 13:13:51 +01:00
David Herrmann
5817878c6f drm: remove redundant minor->device field
Whenever we access minor->device, we are in a minor->kdev->...->fops
callback so the minor->kdev pointer *must* be valid. Thus, simply use
minor->kdev->devt instead of minor->device and remove the redundant field.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-16 12:25:19 +01:00
David Herrmann
1616c525b9 drm: add minor-lookup/release helpers
Instead of accessing drm_minors_idr directly, this adds a small helper to
hide the internals. This will help us later to remove the drm_global_mutex
requirement for minor-lookup.

Furthermore, this also makes sure that minor->dev is always valid and
takes a reference-count to the device as long as the minor is used in an
open-file. This way, "struct file*"->private_data->dev is guaranteed to be
valid (which it has to, as we cannot reset it).

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-16 12:25:17 +01:00
David Herrmann
099d1c290e drm: provide device-refcount
Lets not trick ourselves into thinking "drm_device" objects are not
ref-counted. That's just utterly stupid. We manage "drm_minor" objects on
each drm-device and each minor can have an unlimited number of open
handles. Each of these handles has the drm_minor (and thus the drm_device)
as private-data in the file-handle. Therefore, we may not destroy
"drm_device" until all these handles are closed.

It is *not* possible to reset all these pointers atomically and restrict
access to them, and this is *not* how this is done! Instead, we use
ref-counts to make sure the object is valid and not freed.

Note that we currently use "dev->open_count" for that, which is *exactly*
the same as a reference-count, just open coded. So this patch doesn't
change any semantics on DRM devices (well, this patch just introduces the
ref-count, anyway. Follow-up patches will replace open_count by it).

Also note that generic VFS revoke support could allow us to drop this
ref-count again. We could then just synchronously disable any fops->xy()
calls. However, this is not the case, yet, and no such patches are
in sight (and I seriously question the idea of dropping the ref-cnt
again).

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:25:17 +01:00
David Herrmann
cb8a239b03 drm: turn DRM_MINOR_* into enum
Use enum for DRM_MINOR_* constants to avoid hard-coding the IDs.
Furthermore, add a DRM_MINOR_CNT so we can perform range-checks in
follow-ups.

This changes the IDs of the minor-types by -1, but they're not used as
indices so this is fine.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-16 12:25:17 +01:00
David Herrmann
b9a0d15cc5 drm: remove unused DRM_MINOR_UNASSIGNED
This constant is unused, remove it.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-16 12:25:17 +01:00
David Herrmann
45e212d20f drm: group dev-lifetime related members
These members are all managed by DRM-core, lets group them together so
they're not split across the whole device.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-16 12:25:16 +01:00
David Herrmann
44d847b743 drm: init TTM dev_mapping in ttm_bo_device_init()
With dev->anon_inode we have a global address_space ready for operation
right from the beginning. Therefore, there is no need to do a delayed
setup with TTM. Instead, set dev_mapping during initialization in
ttm_bo_device_init() and remove any "if (dev_mapping)" conditions.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16 12:23:42 +01:00