- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x
PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI
FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ
hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP
IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ
pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x
N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et
Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf
HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM
ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b
kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R
XmTOYW3U9XR3gw==
=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
-----BEGIN PGP SIGNATURE-----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=H31v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2qZ7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some versions of the pmic_glink firmware does not allow dynamic GLINK
intent allocations, attempting to send a message before the firmware has
allocated its receive buffers and announced these intent allocations
will fail. When this happens something like this showns up in the log:
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to send altmode request: 0x10 (-125)
pmic_glink_altmode.pmic_glink_altmode pmic_glink.altmode.0: failed to request altmode notifications: -125
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI read request: -125
qcom_battmgr.pmic_glink_power_supply pmic_glink.power-supply.0: failed to request power notifications
GLINK has been updated to distinguish between the cases where the remote
is going down (-ECANCELED) and the intent allocation being rejected
(-EAGAIN).
Retry the send until intent buffers becomes available, or an actual
error occur.
To avoid infinitely waiting for the firmware in the event that this
misbehaves and no intents arrive, an arbitrary 5 second timeout is
used.
This patch was developed with input from Chris Lew.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/Zqet8iInnDhnxkT9@hovoldconsulting.com/#t
Cc: stable@vger.kernel.org # rpmsg: glink: Handle rejected intent request better
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20241023-pmic-glink-ecancelled-v2-2-ebc268129407@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In success case, the revision holds a non-null pointer. The current
logic incorrectly returns an error for a non-null pointer, whereas
it should return an error for a null pointer.
The socinfo driver for IPQ9574 and IPQ5332 is currently broken,
resulting in the following error message
qcom-socinfo qcom-socinfo: probe with driver qcom-socinfo failed with
error -12
Add a null check for the revision to ensure it returns an error only in
failure case (null pointer).
Fixes: e694d2b5c5 ("soc: qcom: Add check devm_kasprintf() returned value")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241016144852.2888679-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add driver for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU).
This driver supports the external interrupts NMI, IRQn, and TINTn.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241009230817.798582-3-fabrizio.castro.jz@renesas.com
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQQQ/+b4s5DeF6zCYyNoqS/rAbjdeAUCZv4m/xwcY2hyaXN0b3Bo
ZS5sZXJveUBjc2dyb3VwLmV1AAoJEGipL+sBuN14EhQBAM18WZPM03Lmf7FEy+qX
ZCLd3DPRF2jXu8TfL83zwS3oAQC6fyYxtq0U2Wbo66TTtmjWfTXMgbK8AebDa92J
4hugDg==
=1fza
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=s55C
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux into arm/fixes
FSL SOC fixes for v6.12:
- Fix a "cast to pointer from integer of different size" build error
due to IS_ERROR_VALUE() used with something which is not a pointer.
- Fix an unused data build warning.
* tag 'soc_fsl-6.12-3' of https://github.com/chleroy/linux:
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
Link: https://lore.kernel.org/r/c954bdb0-0c16-491a-8662-37e58f07208f@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On most modern qualcomm SoCs, the configuration necessary to enable the
Tag/Data RAM related irqs being propagated to the SoC irq controller is
already done in firmware (in DSF or 'DDR System Firmware')
On some like the x1e80100, these registers aren't even accesible to the
kernel causing a crash when edac device is probed.
Hence, make the irq configuration optional in the driver and mark x1e80100
as the SoC on which this should be avoided.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Reported-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240903101510.3452734-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
ppc64_book3e_allmodconfig:
drivers/soc/fsl/qe/qmc.c: In function ‘qmc_qe_init_resources’:
include/linux/err.h:28:49: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
28 | #define IS_ERR_VALUE(x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
| ^
include/linux/compiler.h:77:45: note: in definition of macro ‘unlikely’
77 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
drivers/soc/fsl/qe/qmc.c:1764:13: note: in expansion of macro ‘IS_ERR_VALUE’
1764 | if (IS_ERR_VALUE(info)) {
| ^~~~~~~~~~~~
IS_ERR_VALUE() is only meant for pointers. Fix this by checking for a
negative error value instead, which matches the documented behavior of
devm_qe_muram_alloc() aka devm_cpm_muram_alloc().
While at it, remove the unneeded print in case of a memory allocation
failure, and propagate the returned error code.
Fixes: eb680d5630 ("soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/8b113596b2c8cdda6655346232cc603efdeb935a.1727708905.git.geert+renesas@glider.be
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
devm_kasprintf() can return a NULL pointer on failure but this
returned value in qcom_socinfo_probe() is not checked.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20240929072349.202520-1-hanchunchao@inspur.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Commit 6eab0ce6e1 ("soc: Add SoC driver for Cirrus ep93xx") adds the
config EP93XX_SOC referring to the config EP93XX_SOC_COMMON.
Within the same patch series of the commit above, the commit 046322f1e1
("ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms") then removes the
config EP93XX_SOC_COMMON. With that the reference to this config is
obsolete.
Simplify the expression in the EP93XX_SOC config definition.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver updates seem larger this time around, with changes
is many of the SoC specific drivers, both the custom drivers/soc
ones and the closely related subsystems (memory, bus, firmware,
reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and
power management code. This is the latest variant of one of the
oldest still supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in many
of their drivers to add more features and additional SoC support. Most
of these are somewhat firmware related as the platform has a number of
firmware based interfaces to the kernel. A notable addition here is the
inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly cleanups.
The Arm SCMI firmware driver gets a major rework to modularize
the existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a
number of smaller updates.
The Arm FF-A firmware driver gets a feature update to support
the v1.2 version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring
for Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra, amlogic,
mediatek) drivers and their DT bindings.
-----BEGIN PGP SIGNATURE-----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=EauF
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
Add an SoC driver for the ep93xx. Currently there is only one thing
not fitting into any other framework, and that is the swlock setting.
Used for clock settings, pinctrl and restart.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
-----BEGIN PGP SIGNATURE-----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=hZ0b
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6GV4
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When TSA is compiled as module the following error is reported:
"ucc_mux_set_grant_tsa_bkpt" [drivers/soc/fsl/qe/tsa.ko] undefined!
Indeed, the ucc_mux_set_grant_tsa_bkpt symbol is not exported.
Simply export ucc_mux_set_grant_tsa_bkpt.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409051409.fszn8rEo-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QMC driver requires fsl_soc.h to use function get_immrbase().
This header is provided by powerpc architecture and the functions
it declares are defined only when FSL_SOC is selected.
Today the dependency is the following:
depends on CPM1 || QUICC_ENGINE || \
(FSL_SOC && (CPM || QUICC_ENGINE) && COMPILE_TEST)
This dependency tentatively ensure that FSL_SOC is there when doing a
COMPILE_TEST.
CPM1 is only selected by PPC_8xx and cannot be selected manually.
CPM1 selects FSL_SOC
QUICC_ENGINE on the other hand can be selected by ARM or ARM64 which
doesn't select FSL_SOC. QUICC_ENGINE can also be selected with just
COMPILE_TEST.
It is therefore possible to end up with CPM_QMC selected
without FSL_SOC.
So fix it by making it depend on FSL_SOC at all time.
The rest of the above dependency is the same as the one for CPM_TSA on
which CPM_QMC also depends, so it can go away, leaving only a simple
dependency on FSL_SOC.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240904104859.020fe3a9@canb.auug.org.au/
Fixes: 8655b76b70 ("soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Herve Codina says:
================
This series add support for the QUICC Engine (QE) version of TSA and QMC
components.
CPM1 version is already supported and, as the QE version of those
component are pretty similar to the CPM1 version, the series extend
the already existing drivers to support for the QE version.
The TSA and QMC components are tightly coupled and so the series
provides modifications on both components.
Of course, this series can be split if it is needed. Let me know.
The series is composed of:
- Patches 1 and 2: Fixes related to TRNSYNC in the QMC driver
- Patches 3..6: Fixes of checkpatch detected issues in the TSA driver
- Patch 7: The QE TSA device-tree binding
- Patches 8..13: TSA driver preparations for adding support for QE
- Patches 14 and 15: The support for QE in TSA + MAINTAINERS update
- Patch 16: A TSA API improvement needed for the QE QMC driver
- Patch 17: A clarification in the QE QMC driver
- Patches 18..22: Fixes of checkpatch detected issues in the QMC driver
- Patch 23: The QE QMC device-tree binding
- Patches 24..31: QMC driver preparations for adding support for QE
- Patches 32 and 33: Missing features additions in QE code
- Patches 34..36: The QMC support for QE in QMC + MAINTAINERS update
Compared to the previous iteration, this v2 series updates device-tree
bindings and fixes issues detected by kernel test robots.
Related to the QE QMC device-tree binding, I kept the unit address in
decimal and the 3 compatible strings.
================
Link: https://lore.kernel.org/r/20240808071132.149251-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
This warning was added by commit 07f86917a4 ("soc/fsl/qbman: Use
shared-dma-pool for QMan private memory allocations") but
RESERVEDMEM_OF_DECLARE usage was removed by
commit 3e62273ac6 ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE
usage") . For non-popwerpc platforms, such as ls1043, this warning
is redundant. ls1043 itself uses shared-dma-mem.
Fixes: 3e62273ac6 ("soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20240802021651.3854295-1-xiaolei.wang@windriver.com
[chleroy: Added more details in commit message]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
An iommu domain is allocated in portal_set_cpu() and is attached to
pcfg->dev in the same function.
Use iommu_paging_domain_alloc() to make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-14-baolu.lu@linux.intel.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The QUICC Engine (QE) QMC can use a firmware to have the QMC working in
'soft-qmc' mode.
Handle this optional 'soft-qmc' firmware.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-36-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the QMC (QUICC Multichannel Controller) available in
some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM QMC, this QE QMC does not
use a fixed area for the UCC/SCC parameters area but it uses a dynamic
area allocated and provided to the hardware at runtime.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-35-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Introduce devm_cpm_muram_alloc() and devm_cpm_muram_alloc_fixed(), the
resource-managed version of cpm_muram_alloc and cpm_muram_alloc_fixed().
These resource-managed versions simplify the user avoiding the need to
call cpm_muram_free(). Indeed, the allocated area returned by these
functions will be automatically freed on driver detach.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-33-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC.
In order to prepare the support for the QUICC Engine (QE) version of
QMC, introduce qmc_version to identify versions. This will enable the
code to make the distinction between several QMC implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-32-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. Even if GSMRL is specific to
the CPM1 version, the exact same purpose and format register (GUMRL) is
present in the QUICC Engine (QE) version of QMC. Compared to the QE
version, the values defined for the mode bitfield are different and the
0x0A value defined for the QMC mode is CPM1 specific.
In order to prepare the support for the QE version, rename this bitfield
value to clearly identify it as CPM1 specific.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-31-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC, RPACK does not need to
be initialized. This is not the case in the QUICC Engine (QE) version.
In preparation of the support for QE, initialize the RPACK register
when the receiver is initialized and each time it is restarted.
This additional RPACK initialization has no impact in the CPM1 version
of QMC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-30-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC and qmc_chan_command() is
clearly CPM1 specific.
In order to prepare the support for the QUICC Engine (QE) version,
rename qmc_chan_command() to reflect that point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-29-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC and initialize the QMC used
SCC. The QUICC Engine (QE) version uses an UCC (Unified Communication
Controllers) instead of the SCC (Serial Communication Controllers) used
in the CPM1 version. These controllers serve the same purpose and are
used in the same way but their inializations are slightly different.
In order to prepare the support for QE version of QMC, introduce
qmc_init_xcc() to initialize theses controllers (UCC in QE and SCC in
CPM1) and isolate the CPM1 specific SCC initialization in a specific
function.
Also introduce qmc_exit_xcc() for consistency to revert operations done
in qmc_init_xcc().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-28-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of QMC. Resources initialisations
(i.e. retrieving base addresses and offsets of different parts) will
be slightly different in the QUICC Engine (QE) version. Indeed, in QE
version, some resources need to be allocated and are no more "staticaly"
defined.
In order to prepare the support for QE version, introduce
qmc_init_resource() to initialize those resources and isolate the CPM1
specific operations in a specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-27-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. In the QUICC Engine (QE)
version, some operations done at probe() need to be done in a different
order.
In order to prepare the support for the QE version, changed the sequence
of operation done at probe():
- Retrieve the tsa_serial earlier, before initializing resources.
- Group SCC initialisation and do this initialization when it is really
needed in the probe() sequence.
Having the QE compatible sequence in the CPM1 version does not lead to
any issue and works correctly without any regressions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-26-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of QMC. Some hardcoded values are used
several times to initialize the QMC state machine. In the QUICC Engine
(QE) version of QMC, these values are different.
In order to prepare the support for the QE version of QMC and avoid the
copy of the hardcoded values, introduce the qmc_data structure to define
these version specific values.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-25-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
checkpatch.pl signals the following improvement for qmc.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-19-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
QMC_TSA_MASK is a bitfield. The value defined is a specific value of
this bitfield and correspond to the use of 8bit resolution for the
routing entry.
Be accurate and rename the defined constant to reflect this point.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-18-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
TSA consumers in CPM1 implementation don't need to know about the serial
device number used by the TSA component. In QUICC Engine implementation,
this information is needed.
Improve the TSA API with tsa_serial_get_num() in order to provide this
information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-17-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
The QE TSA is similar to the CPM1 TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers).
Also, compared against the CPM1 TSA, this QE TSA can handle up to 4 TDMs
instead of 2 and allows to configure the logic level of sync signals.
At a lower level, compared against CPM TSA implementation, some
registers are slightly different even if same features are present.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-15-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles CPM1 version of TSA.
In order to prepare the support for the QUICC Engine (QE) version of
TSA, introduce tsa_version to identify versions. This will enable the
code to make the distinction between several TSA implementations.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-14-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Connecting and
disconnecting the SCC to/from the TSA consists in handling SICR register
which is CPM1 specific. The connection and disconnection operation in
the QUICC Engine (QE) version are slightly different.
In order to prepare the support for the QE version, clearly identify
SICR register as specific to CPM1 and isolate its handling done in
connect and disconnect functions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-13-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Setting up TSA consists in
handling SIMODE and SIGMR registers. These registers are CPM1 specific.
Setting up the QUICC Engine (QE) version of TSA is slightly different.
In order to prepare the support for QE version, clearly identify these
registers as CPM1 compatible and isolate their handling in a CPM1
specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-12-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Compared against QUICC
Engine (QE) version of TSA, CPM1 SIRAM entries are slightly different.
In order to prepare the support for the QE version, clearly identify
these entries and functions handling them as CPM1 compatible.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-11-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Loops handling the tdm array use hardcoded size and the initialization
part uses hardcoded indexes to initialize the array.
Use ARRAY_SIZE() to avoid the hardcoded size and initialize the array
using a loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-10-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
