Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a section to document all the different ways in which the KVM API sucks.
I am sure there are way more, give people a place to vent so that userspace
authors are aware.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110712.222449-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a file to document all the different ways in which the virtual CPU
emulation is imperfect. Include an example to show how to document
such errata.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220322110712.222449-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM already has an arm/ subdirectory, but s390 and x86 do not even though
they have a relatively large number of files specific to them. Create
new directories in Documentation/virt/kvm for these two architectures
as well.
While at it, group the API documentation and the developer documentation
in the table of contents.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110712.222449-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm->mn_invalidate_lock and kvm->slots_arch_lock were not included in the
documentation, add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110720.222499-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Separate the various locks clearly, and include the new names of blocked_vcpu_on_cpu_lock
and blocked_vcpu_on_cpu.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220322110720.222499-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_DISABLE_QUIRKS is irrevocably broken. The capability does not
advertise the set of quirks which may be disabled to userspace, so it is
impossible to predict the behavior of KVM. Worse yet,
KVM_CAP_DISABLE_QUIRKS will tolerate any value for cap->args[0], meaning
it fails to reject attempts to set invalid quirk bits.
The only valid workaround for the quirky quirks API is to add a new CAP.
Actually advertise the set of quirks that can be disabled to userspace
so it can predict KVM's behavior. Reject values for cap->args[0] that
contain invalid bits.
Finally, add documentation for the new capability and describe the
existing quirks.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220301060351.442881-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
-----BEGIN PGP SIGNATURE-----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=J1mn
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.18
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
* kvm-arm64/misc-5.18:
: .
: Misc fixes for KVM/arm64 5.18:
:
: - Drop unused kvm parameter to kvm_psci_version()
:
: - Implement CONFIG_DEBUG_LIST at EL2
:
: - Make CONFIG_ARM64_ERRATUM_2077057 default y
:
: - Only do the interrupt dance if we have exited because of an interrupt
:
: - Remove traces of 32bit ARM host support from the documentation
: .
Documentation: KVM: Update documentation to indicate KVM is arm64-only
KVM: arm64: Only open the interrupt window on exit due to an interrupt
KVM: arm64: Enable Cortex-A510 erratum 2077057 by default
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM support for 32-bit ARM hosts (KVM/arm) has been removed from the
kernel since commit 541ad0150c ("arm: Remove 32bit KVM host
support"). There still exists some remnants of the old architecture in
the KVM documentation.
Remove all traces of 32-bit host support from the documentation. Note
that AArch32 guests are still supported.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220308172856.2997250-1-oupton@google.com
Remove the now unused KVM_REQ_MMU_RELOAD, shift KVM_REQ_VM_DEAD into the
unoccupied space, and update vcpu-requests.rst, which was missing an
entry for KVM_REQ_VM_DEAD. Switching KVM_REQ_VM_DEAD to entry '1' also
fixes the stale comment about bits 4-7 being reserved.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm-arm64/psci-1.1:
: .
: Limited PSCI-1.1 support from Will Deacon:
:
: This small series exposes the PSCI SYSTEM_RESET2 call to guests, which
: allows the propagation of a "reset_type" and a "cookie" back to the VMM.
: Although Linux guests only ever pass 0 for the type ("SYSTEM_WARM_RESET"),
: the vendor-defined range can be used by a bootloader to provide additional
: information about the reset, such as an error code.
: .
KVM: arm64: Remove unneeded semicolons
KVM: arm64: Indicate SYSTEM_RESET2 in kvm_run::system_event flags field
KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest
KVM: arm64: Bump guest PSCI version to 1.1
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a new capability, KVM_CAP_PMU_CAPABILITY, that takes a bitmask of
settings/features to allow userspace to configure PMU virtualization on
a per-VM basis. For now, support a single flag, KVM_PMU_CAP_DISABLE,
to allow disabling PMU virtualization for a VM even when KVM is configured
with enable_pmu=true a module level.
To keep KVM simple, disallow changing VM's PMU configuration after vCPUs
have been created.
Signed-off-by: David Dunn <daviddunn@google.com>
Message-Id: <20220223225743.2703915-2-daviddunn@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By request of Nick Piggin:
> Patch 3 requires a KVM_CAP_PPC number allocated. QEMU maintainers are
> happy with it (link in changelog) just waiting on KVM upstreaming. Do
> you have objections to the series going to ppc/kvm tree first, or
> another option is you could take patch 3 alone first (it's relatively
> independent of the other 2) and ppc/kvm gets it from you?
Add KVM_CAP_PPC_AIL_MODE_3 to advertise the capability to set the AIL
resource mode to 3 with the H_SET_MODE hypercall. This capability
differs between processor types and KVM types (PR, HV, Nested HV), and
affects guest-visible behaviour.
QEMU will implement a cap-ail-mode-3 to control this behaviour[1], and
use the KVM CAP if available to determine KVM support[2].
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clarify that the key argument represents the access key, not the whole
storage key.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20220221143657.3712481-1-scgl@linux.ibm.com
Fixes: 5e35d0eb47 ("KVM: s390: Update api documentation for memop ioctl")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When handling reset and power-off PSCI calls from the guest, we
initialise X0 to PSCI_RET_INTERNAL_FAILURE in case the VMM tries to
re-run the vCPU after issuing the call.
Unfortunately, this also means that the VMM cannot see which PSCI call
was issued and therefore cannot distinguish between PSCI SYSTEM_RESET
and SYSTEM_RESET2 calls, which is necessary in order to determine the
validity of the "reset_type" in X1.
Allocate bit 0 of the previously unused 'flags' field of the
system_event structure so that we can indicate the PSCI call used to
initiate the reset.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220221153524.15397-4-will@kernel.org
Follow the precedent set by other architectures that support the VCPU
ioctl, KVM_ENABLE_CAP, and advertise the VM extension, KVM_CAP_ENABLE_CAP.
This way, userspace can ensure that KVM_ENABLE_CAP is available on a
vcpu before using it.
Fixes: 5c919412fe ("kvm/x86: Hyper-V synthetic interrupt controller")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220214212950.1776943-1-aaronlewis@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document all currently existing operations, flags and explain under
which circumstances they are available. Document the recently
introduced absolute operations and the storage key protection flag,
as well as the existing SIDA operations.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220211182215.2730017-10-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Userspace can assign a PMU to a VCPU with the KVM_ARM_VCPU_PMU_V3_SET_PMU
device ioctl. If the VCPU is scheduled on a physical CPU which has a
different PMU, the perf events needed to emulate a guest PMU won't be
scheduled in and the guest performance counters will stop counting. Treat
it as an userspace error and refuse to run the VCPU in this situation.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-7-alexandru.elisei@arm.com
When KVM creates an event and there are more than one PMUs present on the
system, perf_init_event() will go through the list of available PMUs and
will choose the first one that can create the event. The order of the PMUs
in this list depends on the probe order, which can change under various
circumstances, for example if the order of the PMU nodes change in the DTB
or if asynchronous driver probing is enabled on the kernel command line
(with the driver_async_probe=armv8-pmu option).
Another consequence of this approach is that on heteregeneous systems all
virtual machines that KVM creates will use the same PMU. This might cause
unexpected behaviour for userspace: when a VCPU is executing on the
physical CPU that uses this default PMU, PMU events in the guest work
correctly; but when the same VCPU executes on another CPU, PMU events in
the guest will suddenly stop counting.
Fortunately, perf core allows user to specify on which PMU to create an
event by using the perf_event_attr->type field, which is used by
perf_init_event() as an index in the radix tree of available PMUs.
Add the KVM_ARM_VCPU_PMU_V3_CTRL(KVM_ARM_VCPU_PMU_V3_SET_PMU) VCPU
attribute to allow userspace to specify the arm_pmu that KVM will use when
creating events for that VCPU. KVM will make no attempt to run the VCPU on
the physical CPUs that share the PMU, leaving it up to userspace to manage
the VCPU threads' affinity accordingly.
To ensure that KVM doesn't expose an asymmetric system to the guest, the
PMU set for one VCPU will be used by all other VCPUs. Once a VCPU has run,
the PMU cannot be changed in order to avoid changing the list of available
events for a VCPU, or to change the semantics of existing events.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-6-alexandru.elisei@arm.com
Userspace can specify which events a guest is allowed to use with the
KVM_ARM_VCPU_PMU_V3_FILTER attribute. The list of allowed events can be
identified by a guest from reading the PMCEID{0,1}_EL0 registers.
Changing the PMU event filter after a VCPU has run can cause reads of the
registers performed before the filter is changed to return different values
than reads performed with the new event filter in place. The architecture
defines the two registers as read-only, and this behaviour contradicts
that.
Keep track when the first VCPU has run and deny changes to the PMU event
filter to prevent this from happening.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ Alexandru E: Added commit message, updated ioctl documentation ]
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127161759.53553-2-alexandru.elisei@arm.com
* Redo incorrect fix for SEV/SMAP erratum
* Windows 11 Hyper-V workaround
Other x86 changes:
* Various x86 cleanups
* Re-enable access_tracking_perf_test
* Fix for #GP handling on SVM
* Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
* Fix for ICEBP in interrupt shadow
* Avoid false-positive RCU splat
* Enable Enlightened MSR-Bitmap support for real
ARM:
* Correctly update the shadow register on exception injection when
running in nVHE mode
* Correctly use the mm_ops indirection when performing cache invalidation
from the page-table walker
* Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
* Dead code cleanup
There will be another pull request for ARM fixes next week, but
those patches need a bit more soak time.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHz5eIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv4wgAopj0Zlutrrtw3KT4/XnmSdMPgN0j
jQNzysSLTO5wGQCEogycjYXkGUDFu1Gdi+K91QAyjeKja20pIhPLeS2CBDRJyOc5
73K7sxqz51JnQiVFzkTuA+qzn+lXaJ9LUXtdg8BnQMSKyt2AJOqE8uT10kcYOD5q
mW4V3QUA0QpVKN0cYHv/G/zvBwQGGSLZetFbuAzwH2EDTpIi1aio5ZN1r0AoH18L
2x5kYPpqmnoBvo2cB4b7SNmxv3ZPQ5K+wta0uwZ4pO+UuYiRd84RPr5lErywJC3w
nci0eC0DoXrC6h+35UItqM8RqAGv6LADbDnr1RGojmfogSD0OtbX8y3hjw==
=iKnI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
Because KVM_GET_SUPPORTED_CPUID is meant to be passed (by simple-minded
VMMs) to KVM_SET_CPUID2, it cannot include any dynamic xsave states that
have not been enabled. Probing those, for example so that they can be
passed to ARCH_REQ_XCOMP_GUEST_PERM, requires a new ioctl or arch_prctl.
The latter is in fact worse, even though that is what the rest of the
API uses, because it would require supported_xcr0 to be moved from the
KVM module to the kernel just for this use. In addition, the value
would be nonsensical (or an error would have to be returned) until
the KVM module is loaded in.
Therefore, to limit the growth of system ioctls, add a /dev/kvm
variant of KVM_{GET,HAS}_DEVICE_ATTR, and implement it in x86
with just one group (0) and attribute (KVM_X86_XCOMP_GUEST_SUPP).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
Use the api number 134 for KVM_GET_XSAVE2, instead of 42, which has been
used by KVM_GET_XSAVE.
Also, fix the WARNINGs of the underlines being too short.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Message-Id: <20220120045003.315177-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
With KVM_CAP_XSAVE, userspace uses a hardcoded 4KB buffer to get/set
xstate data from/to KVM. This doesn't work when dynamic xfeatures
(e.g. AMX) are exposed to the guest as they require a larger buffer
size.
Introduce a new capability (KVM_CAP_XSAVE2). Userspace VMM gets the
required xstate buffer size via KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).
KVM_SET_XSAVE is extended to work with both legacy and new capabilities
by doing properly-sized memdup_user() based on the guest fpu container.
KVM_GET_XSAVE is kept for backward-compatible reason. Instead,
KVM_GET_XSAVE2 is introduced under KVM_CAP_XSAVE2 as the preferred
interface for getting xstate buffer (4KB or larger size) from KVM
(Link: https://lkml.org/lkml/2021/12/15/510)
Also, update the api doc with the new KVM_GET_XSAVE2 ioctl.
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-19-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should not include any dynamic xstates in
CPUID[0xD] if they have not been requested with prctl. Otherwise
a process which directly passes KVM_GET_SUPPORTED_CPUID to
KVM_SET_CPUID2 would now fail even if it doesn't intend to use a
dynamically enabled feature. Userspace must know that prctl is
required and allocate >4K xstate buffer before setting any dynamic
bit.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-5-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds basic support for delivering 2 level event channels to a guest.
Initially, it only supports delivery via the IRQ routing table, triggered
by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast()
function which will use the pre-mapped shared_info page if it already
exists and is still valid, while the slow path through the irqfd_inject
workqueue will remap the shared_info page if necessary.
It sets the bits in the shared_info page but not the vcpu_info; that is
deferred to __kvm_xen_has_interrupt() which raises the vector to the
appropriate vCPU.
Add a 'verbose' mode to xen_shinfo_test while adding test cases for this.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-5-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the newly reinstated gfn_to_pfn_cache to maintain a kernel mapping
of the Xen shared_info page so that it can be accessed in atomic context.
Note that we do not participate in dirty tracking for the shared info
page and we do not explicitly mark it dirty every single tim we deliver
an event channel interrupts. We wouldn't want to do that even if we *did*
have a valid vCPU context with which to do so.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-4-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new module parameter to allow users to use SEV_INIT_EX instead of
SEV_INIT. This helps users who lock their SPI bus to use the PSP for SEV
functionality. The 'init_ex_path' parameter defaults to NULL which means
the kernel will use SEV_INIT, if a path is specified SEV_INIT_EX will be
used with the data found at the path. On certain PSP commands this
file is written to as the PSP updates the NV memory region. Depending on
file system initialization this file open may fail during module init
but the CCP driver for SEV already has sufficient retries for platform
initialization. During normal operation of PSP system and SEV commands
if the PSP has not been initialized it is at run time. If the file at
'init_ex_path' does not exist the PSP will not be initialized. The user
must create the file prior to use with 32Kb of 0xFFs per spec.
Signed-off-by: David Rientjes <rientjes@google.com>
Co-developed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This bit is very close to mean "role.quadrant is not in use", except that
it is false also when the MMU is mapping guest physical addresses
directly. In that case, role.quadrant is indeed not in use, but there
are no guest PTEs at all.
Changing the name and direction of the bit removes the special case,
since a guest with paging disabled, or not considering guest paging
structures as is the case for two-dimensional paging, does not have
to deal with 4-byte guest PTEs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-10-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They are defined in include/uapi/linux/kvm.h as
KVM_S390_GET_SKEYS_NONE and KVM_S390_SKEYS_MAX, but the
api documetation talks of KVM_S390_GET_KEYS_NONE and
KVM_S390_SKEYS_ALLOC_MAX respectively.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20211118102522.569660-1-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
For SEV to work with intra host migration, contents of the SEV info struct
such as the ASID (used to index the encryption key in the AMD SP) and
the list of memory regions need to be transferred to the target VM.
This change adds a commands for a target VMM to get a source SEV VM's sev
info.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-3-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a KVM selftest to verify that userspace manipulation of the
TSC (via the new vCPU attribute) results in the correct behavior within
the guest.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To date, VMM-directed TSC synchronization and migration has been a bit
messy. KVM has some baked-in heuristics around TSC writes to infer if
the VMM is attempting to synchronize. This is problematic, as it depends
on host userspace writing to the guest's TSC within 1 second of the last
write.
A much cleaner approach to configuring the guest's views of the TSC is to
simply migrate the TSC offset for every vCPU. Offsets are idempotent,
and thus not subject to change depending on when the VMM actually
reads/writes values from/to KVM. The VMM can then read the TSC once with
KVM_GET_CLOCK to capture a (realtime, host_tsc) pair at the instant when
the guest is paused.
Cc: David Matlack <dmatlack@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-8-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handling the migration of TSCs correctly is difficult, in part because
Linux does not provide userspace with the ability to retrieve a (TSC,
realtime) clock pair for a single instant in time. In lieu of a more
convenient facility, KVM can report similar information in the kvm_clock
structure.
Provide userspace with a host TSC & realtime pair iff the realtime clock
is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid
realtime value, advance the KVM clock by the amount of elapsed time. Do
not step the KVM clock backwards, though, as it is a monotonic
oscillator.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost
-----BEGIN PGP SIGNATURE-----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=MMFv
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-5.16-1' of git://github.com/kvm-riscv/linux into HEAD
Initial KVM RISC-V support
Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost
Document RISC-V specific parts of the KVM API, such as:
- The interrupt numbers passed to the KVM_INTERRUPT ioctl.
- The states supported by the KVM_{GET,SET}_MP_STATE ioctls.
- The registers supported by the KVM_{GET,SET}_ONE_REG interface
and the encoding of those register ids.
- The exit reason KVM_EXIT_RISCV_SBI for SBI calls forwarded to
userspace tool.
CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for which
I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
...plus the usual assortment of updates, fixes, typo tweaks, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmEugrgACgkQF0NaE2wM
fliWWQf/RXf34QkMIe+r77WlTRKc+/6R/cO9VlYPtM9vqreKHZZvGgM1t76aOusb
M5QHwQGoZDzaE1wrv0PPm00HtB0Tw7GfZRUbZ4D+niJD1+gcbDTkTR6NdjOvWWUR
zHX2Sx8KJiNrFDtLtRtlUexM8GD124KZ0A8GF6Hpu3WR3HTFDInTdiylUOmj/4eO
3zUGgrJnUVzkqHLGZzV/kmE4kEHGpxyps2JwGq2iF7362t8R6xH3mEdKKKc1pUpx
lGSxfHs+OPWRsNxVJsdYh8kneIpML8OK6lKda1pzwNj8QhIMz/6tZoutKziHsalI
HkbC3exh+SHak2U6Had303vqkIM7cg==
=2QUy
-----END PGP SIGNATURE-----
Merge tag 'docs-5.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
KVM_GUESTDBG_BLOCKIRQ will allow KVM to block all interrupts
while running.
This change is mostly intended for more robust single stepping
of the guest and it has the following benefits when enabled:
* Resuming from a breakpoint is much more reliable.
When resuming execution from a breakpoint, with interrupts enabled,
more often than not, KVM would inject an interrupt and make the CPU
jump immediately to the interrupt handler and eventually return to
the breakpoint, to trigger it again.
From the user point of view it looks like the CPU never executed a
single instruction and in some cases that can even prevent forward
progress, for example, when the breakpoint is placed by an automated
script (e.g lx-symbols), which does something in response to the
breakpoint and then continues the guest automatically.
If the script execution takes enough time for another interrupt to
arrive, the guest will be stuck on the same breakpoint RIP forever.
* Normal single stepping is much more predictable, since it won't
land the debugger into an interrupt handler.
* RFLAGS.TF has less chance to be leaked to the guest:
We set that flag behind the guest's back to do single stepping
but if single step lands us into an interrupt/exception handler
it will be leaked to the guest in the form of being pushed
to the stack.
This doesn't completely eliminate this problem as exceptions
can still happen, but at least this reduces the chances
of this happening.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
