If the first mounter fails to recover one of the journals
during mount, the mount should fail.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Previously, a spectator mount would not even attempt to do
journal recovery for a failed node. This meant that if all
mounted nodes were spectators, everyone would be stuck after
a node failed, all waiting for recovery to be performed.
This is unnecessary since the failed node had a clean journal.
Instead, allow a spectator mount to do a partial "read only"
recovery, which means it will check if the failed journal is
clean, and if so, report a successful recovery. If the failed
journal is not clean, it reports that journal recovery failed.
This makes it work the same as a read only mount on a read only
block device.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This new method of managing recovery is an alternative to
the previous approach of using the userland gfs_controld.
- use dlm slot numbers to assign journal id's
- use dlm recovery callbacks to initiate journal recovery
- use a dlm lock to determine the first node to mount fs
- use a dlm lock to track journals that need recovery
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch separates the code pertaining to allocations into two
parts: quota-related information and block reservations.
This patch also moves all the block reservation structure allocations to
function gfs2_inplace_reserve to simplify the code, and moves
the frees to function gfs2_inplace_release.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the vestigial variable al_alloced from
the gfs2_alloc structure. This is another baby step toward
multi-block reservations.
My next planned step is to decouple the quota variables
from the gfs2_alloc structure so we can use a different
method for allocations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.
If something does go wrong, then a stack trace is probably
more useful anyway.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time. It provides a slight
performance increase, and it dramatically simplifies the code.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.
The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:
Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.
Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.
Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.
Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a performance improvement for GFS2 in a clustered
environment. It makes the glock hold time self-adjusting.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a cache for the hash table to the directory code
in order to help simplify the way in which the hash table is
accessed. This is intended to be a first step towards introducing
some performance improvements in the directory code.
There are two follow ups that I'm hoping to see fairly shortly. One
is to simplify the hash table reading code now that we always read the
complete hash table, whether we want one entry or all of them. The
other is to introduce readahead on the heads of the hash chains
which are referred to from the table.
The hash table is a maximum of 128k in size, so it is not worth trying
to read it in small chunks.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.
This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.
There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Booher <dbooher@adams.net>
The VFS superblock structure now has a UUID field, so we can use that
in preference to the UUID field in the GFS2 superblock now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.
In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.
There is still more which can usefully be done in this area,
but this is a good start at least.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The GLF_LRU flag introduced in the previous patch can be
used to check if a glock is on the lru list when a new
holder is queued and if so remove it, without having first
to get the lru_lock.
The main purpose of this patch however is to optimise the
glocks left over when an inode at end of life is being
evicted. Previously such glocks were left with the GLF_LFLUSH
flag set, so that when reclaimed, each one required a log flush.
This patch resets the GLF_LFLUSH flag when there is nothing
left to flush thus preventing later log flushes as glocks are
reused or demoted.
In order to do this, we need to keep track of the number of
revokes which are outstanding, and also to clear the GLF_LFLUSH
bit after a log commit when only revokes have been processed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.
Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The log lock is currently used to protect the AIL lists and
the movements of buffers into and out of them. The lists
are self contained and no log specific items outside the
lists are accessed when starting or emptying the AIL lists.
Hence the operation of the AIL does not require the protection
of the log lock so split them out into a new AIL specific lock
to reduce the amount of traffic on the log lock. This will
also reduce the amount of serialisation that occurs when
the gfs2_logd pushes on the AIL to move it forward.
This reduces the impact of log pushing on sequential write
throughput.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Immediately after being synced to disk, cached quotas are zeroed out and a
subsequent access of the cached quotas results in incorrect zero values. This
meant that gfs2 assumed the actual usage to be the zero (or near-zero) usage
values it found in the cached quotas and comparison against warn/limits never
triggered a quota violation.
This patch adds a new flag QDF_REFRESH that is set after a sync so that the
cached quotas are forcefully refreshed from disk on a subsequent access on
seeing this flag set.
Resolves: rhbz#675944
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This has a number of advantages:
- Reduces contention on the hash table lock
- Makes the code smaller and simpler
- Should speed up glock dumps when under load
- Removes ref count changing in examine_bucket
- No longer need hash chain lock in glock_put() in common case
There are some further changes which this enables and which
we may do in the future. One is to look at using SLAB_RCU,
and another is to look at using a per-cpu counter for the
per-sb glock counter, since that is touched twice in the
lifetime of each glock (but only used at umount time).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can only merge the fields into a bitfield if the locking
rules for them are the same. In this case gl_spin covers all
of the fields (write side) but a couple of them are used
with GLF_LOCK as the read side lock, which should be ok
since we know that the field in question won't be changing
at the time.
The gl_req setting has to be done earlier (in glock.c) in order
to place it under gl_spin. The gl_reply setting also has to be
brought under gl_spin in order to comply with the new rules.
This saves 4*sizeof(unsigned int) per glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Recently a feature was added to GFS2 to allow journal id allocation
via sysfs. This patch builds upon that so that a negative journal id
will be treated as an error code to be passed back as the return code
from mount. This allows termination of the mount process if there is
a failure.
Also, the process has been updated so that the kernel will wait
for a journal id, even in the "spectator" case. This is required
in order to avoid mounting a filesystem in case there is an error
while joining the cluster. In the spectator case, 0 is written into
the file to indicate that all is well, and that mount should continue.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This option has never done anything useful. Also at the same time
this cleans up the sb checks which are done at mount time. The
debug option will be accepted, but ignored in future. Since it
didn't do anything, there didn't seem much point in retaining it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This option defaulted to on for lock_nolock mounts and off
otherwise. The only function was to avoid the revalidation of
dentries. In the cluster case, that is entirely pointless and
liable to cause coherency problems.
The patch changes the revalidation to depend upon whether the
fs is a local or cluster fs (i.e. it follows the existing default
behaviour). I very much doubt anybody ever used this option as
there is no reason to. Even so we will continue to accept it
on the mount command line, but ignore it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is been a no-op for a very long time now. I'm pretty sure
nobody uses it, but just in case we'll still accept it on the
command line, but ignore it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to the design of the VFS, it is quite usual for operations on GFS2
to consist of a lookup (requiring a shared lock) followed by an
operation requiring an exclusive lock. If a remote node has cached an
exclusive lock, then it will receive two demote events in rapid succession
firstly for a shared lock and then to unlocked. The existing min hold time
code was triggering in this case, even if the node was otherwise idle
since the state change time was being updated by the initial demote.
This patch introduces logic to skip the min hold timer in the case that
a "double demote" of this kind has occurred. The min hold timer will
still be used in all other cases.
A new glock flag is introduced which is used to keep track of whether
there have been any newly queued holders since the last glock state
change. The min hold time is only applied if the flag is set.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
This patch adds support for fallocate to gfs2. Since the gfs2 does not support
uninitialized data blocks, it must write out zeros to all the blocks. However,
since it does not need to lock any pages to read from, gfs2 can write out the
zero blocks much more efficiently. On a moderately full filesystem, fallocate
works around 5 times faster on average. The fallocate call also allows gfs2 to
add blocks to the file without changing the filesize, which will make it
possible for gfs2 to preallocate space for the rindex file, so that gfs2 can
grow a completely full filesystem.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
workqueue: mark init_workqueues() as early_initcall()
workqueue: explain for_each_*cwq_cpu() iterators
fscache: fix build on !CONFIG_SYSCTL
slow-work: kill it
gfs2: use workqueue instead of slow-work
drm: use workqueue instead of slow-work
cifs: use workqueue instead of slow-work
fscache: drop references to slow-work
fscache: convert operation to use workqueue instead of slow-work
fscache: convert object to use workqueue instead of slow-work
workqueue: fix how cpu number is stored in work->data
workqueue: fix mayday_mask handling on UP
workqueue: fix build problem on !CONFIG_SMP
workqueue: fix locking in retry path of maybe_create_worker()
async: use workqueue for worker pool
workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
workqueue: implement unbound workqueue
workqueue: prepare for WQ_UNBOUND implementation
libata: take advantage of cmwq and remove concurrency limitations
workqueue: fix worker management invocation without pending works
...
Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
This patch implements a wait for the journal id in the case that it has
not been specified on the command line. This is to allow the future
removal of the mount.gfs2 helper. The journal id would instead be
directly communicated by gfs_controld to the file system. Here is a
comparison of the two systems:
Current:
1. mount calls mount.gfs2
2. mount.gfs2 connects to gfs_controld to retrieve the journal id
3. mount.gfs2 adds the journal id to the mount command line and calls
the mount system call
4. gfs_controld receives the status of the mount request via a uevent
Proposed:
1. mount calls the mount system call (no mount.gfs2 helper)
2. gfs_controld receives a uevent for a gfs2 fs which it doesn't know
about already
3. gfs_controld assigns a journal id to it via sysfs
4. the mount system call then completes as normal (sending a uevent
according to status)
The advantage of the proposed system is that it is completely backward
compatible with the current system both at the kernel and at the
userland levels. The "first" parameter can also be set the same way,
with the restriction that it must be set before the journal id is
assigned.
In addition, if mount becomes stuck waiting for a reply from
gfs_controld which never arrives, then it is killable and will abort the
mount gracefully.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Workqueue can now handle high concurrency. Convert gfs to use
workqueue instead of slow-work.
* Steven pointed out that recovery path might be run from allocation
path and thus requires forward progress guarantee without memory
allocation. Create and use gfs_recovery_wq with rescuer. Please
note that forward progress wasn't guaranteed with slow-work.
* Updated to use non-reentrant workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch adds a message to indicate when barriers have been
disabled due to a block device which doesn't support them. You could
already tell this via the mount options in /proc/mounts, but all the
other filesystems also log a message at the same time.
Also, the same mechanisms are used to indicate when the lock
demote interface has been used (only ever used for debugging)
which is a request from our support team.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains various tweaks to how log flushes and active item writeback
work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits
for gfs2_logd to do the log flushing. Multiple functions were rewritten to
remove the need to call gfs2_log_lock(). Instead of using one test to see if
gfs2_logd had work to do, there are now seperate tests to check if there
are two many buffers in the incore log or if there are two many items on the
active items list.
This patch is a port of a patch Steve Whitehouse wrote about a year ago, with
some minor changes. Since gfs2_ail1_start always submits all the active items,
it no longer needs to keep track of the first ai submitted, so this has been
removed. In gfs2_log_reserve(), the order of the calls to
prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has
been switched. If it called wake_up first there was a small window for a race,
where logd could run and return before gfs2_log_reserve was ready to get woken
up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve()
would be left waiting for gfs2_logd to eventualy run because it timed out.
Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times
out, and flushes the log, can now be set on mount with ar_commit.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 tracks the number of revokes and unrevokes that are part of committed
transactions via sd_log_commited_revoke. It is possible for one process to add
revokes during its transaction, while another process unrevokes them during its
transaction. If the second process finishes its transaction first,
sd_log_commited_revoke will be decremented by the number of unrevokes that the
second process did, without first being incremented by the number of revokes
the first process did. This is fine, since all started transactions must be
completed before the journal can be flushed. However, sd_log_commited_revoke
is an unsigned integer, and log_refund() causes an assertion failure if it
would go negative at the end of a transaction. This patch makes
sd_log_commited_revoke a signed integer and allows it to go negative.
__gfs2_log_flush() still checks that it mataches the actual number of revokes.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As a consequence of the previous patch, we can now remove the
loop which used to be required due to the circular dependency
between the inodes and glocks. Instead we can just invalidate
the inodes, and then clear up any glocks which are left.
Also we no longer need the rwsem since there is no longer any
danger of the inode invalidation calling back into the glock
code (and from there back into the inode code).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.
The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).
This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.
This results in three major improvements:
1. A saving of approx 25% of memory used in caching inodes
2. A removal of the circular dependency between inodes and glocks
3. No confusion between "normal" and "metadata" inodes in super.c
Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a wait on umount between the point at which we
dispose of all glocks and the point at which we unmount the
lock protocol. This ensures that we've received all the replies
to our unlock requests before we stop the locking.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com>
Currently gfs2 issues barrier unconditionally. There are various reasons
to disable them, be that just for testing or for stupid devices flushing
large battert backed caches. Add a nobarrier option that matches xfs and
btrfs for this. Also add a symmetric barrier option to turn it back on
at remount time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 now has three new mount options, statfs_quantum, quota_quantum and
statfs_percent. statfs_quantum and quota_quantum simply allow you to
set the tunables of the same name. Setting setting statfs_quantum to 0
will also turn on the statfs_slow tunable. statfs_percent accepts an
integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to
do any early sync when the local number of blocks free changes by at
least statfs_percent from the totoal number of blocks free. Setting
statfs_percent to 0 disables this.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The /sys/fs/gfs2/<fsname>/lock_module/id file has been unused for
some time now, so we can remove it. We still accept the mount option
though, as userspace still sends that.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The inum structure used throughout GFS2 has two fields. One
no_addr is the disk block number of the inode in question and
is used everywhere as the inode number. The other, no_formal_ino,
is used only as the generation number for NFS.
Historically the no_formal_ino field was set using a complicated
system of one global and one per-node file containing inode numbers
in order to ensure that each no_formal_ino was unique. Also this
code made no provision for what would happen when eventually the
(64 bit) numbers ran out. Now I know that is pretty unlikely to
happen given the large space of numbers, but it is possible
nevertheless.
The only guarantee required for no_formal_ino is that, for any
single inode, the same number doesn't get reused too quickly.
We already have a generation number which is kept in the inode
and initialised from a counter in the resource group (almost
no overhead, since we have to touch the resource group anyway
in order to allocate an inode in the first place). Aside from
ensuring that we never use the value 0 in the no_formal_ino
field, we can use that counter directly.
As a result of that change, we lose about 200 lines of code and
also gain about 10 creates/sec on the postmark benchmark (on
my test machine).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds "-o errors=panic" and "-o errors=withdraw" to the
gfs2 mount options. The "errors=withdraw" option is today's
current behaviour, meaning to withdraw from the file system if a
non-serious gfs2 error occurs. The new "errors=panic" option
tells gfs2 to force a kernel panic if a non-serious gfs2 file
system error occurs. This may be useful, for example, where
fabric-level fencing is used that has no way to reboot (such as
fence_scsi).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When a file is deleted from a gfs2 filesystem on one node, a dcache
entry for it may still exist on other nodes in the cluster. If this
happens, gfs2 will be unable to free this file on disk. Because of this,
it's possible to have a gfs2 filesystem with no files on it and no free
space. With this patch, when a node receives a callback notifying it
that the file is being deleted on another node, it schedules a new
workqueue thread to remove the file's dcache entry.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch increases the frequency with which gfs2 looks
for unlinked, but still allocated inodes. Its the equivalent
operation to ext3's orphan list, but done with bitmaps in
the resource groups.
This also fixes a bug where a field in the rgrp was too small.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
During block allocation, it is useful to know if sections of disk
are full on a finer grained basis than a single resource group.
This can make a performance difference when resource groups have
larger numbers of bitmap blocks, since we no longer have to search
them all block by block in each individual bitmap.
The full flag is set on a per-bitmap basis when it has been
searched and found to have no free space. It is then skipped in
subsequent searches until the flag is reset. The resetting
occurs if we have to drop the glock on the resource group for any
reason, or if we deallocate some blocks within that resource
group and thus free up some space.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch improves the error handling in the case where we
discover that the summary information in the resource group
doesn't match the bitmap information while in the process of
allocating blocks. Originally this resulted in a kernel bug,
but this patch changes that so that we return -EIO and print
some messages explaining what went wrong, and how to fix it.
We also remember locally not to try and allocate from the
same rgrp again, so that a subsequent allocation in a
different rgrp should succeed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a race condition where we can receive recovery
requests part way through processing a umount. This was causing
problems since the recovery thread had already gone away.
Looking in more detail at the recovery code, it was really trying
to implement a slight variation on a work queue, and that happens to
align nicely with the recently introduced slow-work subsystem. As a
result I've updated the code to use slow-work, rather than its own home
grown variety of work queue.
When using the wait_on_bit() function, I noticed that the wait function
that was supplied as an argument was appearing in the WCHAN field, so
I've updated the function names in order to produce more meaningful
output.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
It has always been possible to adjust the gfs2 log commit
interval, but only from the sysfs interface. This adds a
mount option, commit=<nn>, which will be familar to ext3
users.
The sysfs interface continues to be available as well, although
this might be removed in the future.
Also this patch cleans up some duplicated structures in the GFS2
sysfs code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
