When retrieving the enum value associated with typed data during
"is data zero?" checking in btf_dump_type_data_check_zero(), the
return value of btf_dump_get_enum_value() is not passed to the caller
if the function returns a non-zero (error) value. Currently, 0
is returned if the function returns an error. We should instead
propagate the error to the caller.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-4-git-send-email-alan.maguire@oracle.com
__int128 is not supported for some 32-bit platforms (arm and i386).
__int128 was used in carrying out computations on bitfields which
aid display, but the same calculations could be done with __u64
with the small effect of not supporting 128-bit bitfields.
With these changes, a big-endian issue with casting 128-bit integers
to 64-bit for enum bitfields is solved also, as we now use 64-bit
integers for bitfield calculations.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626770993-11073-2-git-send-email-alan.maguire@oracle.com
When run test_tc_tunnel.sh, it complains following error
ipip
encap 192.168.1.1 to 192.168.1.2, type ipip, mac none len 100
test basic connectivity
nc: cannot use -p and -l
nc man page has:
-l Listen for an incoming connection rather than initiating
a connection to a remote host.Cannot be used together with
any of the options -psxz. Additionally, any timeouts specified
with the -w option are ignored.
Correct nc in server_listen().
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210719223022.66681-1-vincent.mc.li@gmail.com
UDP socket support was added recently so testing UDP insert failure is no
longer correct and causes test_maps failure. The fix is easy though, we
simply need to test that UDP is correctly added instead of blocked.
Fixes: 122e6c79ef ("sock_map: Update sock type checks for UDP")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210720184832.452430-1-john.fastabend@gmail.com
Add a test case to check whether an unsuccessful creation of an outer
map of a BTF-defined map-in-map destroys the inner map.
As bpf_object__create_map() is a static function, we cannot just call it
from the test case and then check whether a map accessible via
map->inner_map_fd has been closed. Instead, we iterate over all maps and
check whether the map "$MAP_NAME.inner" does not exist.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-3-m@lambda.lt
If creating an outer map of a BTF-defined map-in-map fails (via
bpf_object__create_map()), then the previously created its inner map
won't be destroyed.
Fix this by ensuring that the destroy routines are not bypassed in the
case of a failure.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-2-m@lambda.lt
By using the stack for this small structure, we avoid the need
for freeing memory in error paths.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-4-git-send-email-alan.maguire@oracle.com
__s64 can be defined as either long or long long, depending on the
architecture. On ppc64le it's defined as long, giving this error:
In file included from btf_dump.c:22:
btf_dump.c: In function 'btf_dump_type_data_check_overflow':
libbpf_internal.h:111:22: error: format '%lld' expects argument of
type 'long long int', but argument 3 has type '__s64' {aka 'long int'}
[-Werror=format=]
111 | libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~
libbpf_internal.h:114:27: note: in expansion of macro '__pr'
114 | #define pr_warn(fmt, ...) __pr(LIBBPF_WARN, fmt, ##__VA_ARGS__)
| ^~~~
btf_dump.c:1992:3: note: in expansion of macro 'pr_warn'
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ^~~~~~~
btf_dump.c:1992:32: note: format string is defined here
1992 | pr_warn("unexpected size [%lld] for id [%u]\n",
| ~~~^
| |
| long long int
| %ld
Cast to size_t and use %zu instead.
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-3-git-send-email-alan.maguire@oracle.com
If data is packed, data structures can store it outside of usual
boundaries. For example a 4-byte int can be stored on a unaligned
boundary in a case like this:
struct s {
char f1;
int f2;
} __attribute((packed));
...the int is stored at an offset of one byte. Some platforms have
problems dereferencing data that is not aligned with its size, and
code exists to handle most cases of this for BTF typed data display.
However pointer display was missed, and a simple function to test if
"ptr_is_aligned(data, data_sz)" would help clarify this code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626475617-25984-2-git-send-email-alan.maguire@oracle.com
Test various type data dumping operations by comparing expected
format with the dumped string; an snprintf-style printf function
is used to record the string dumped. Also verify overflow handling
where the data passed does not cover the full size of a type,
such as would occur if a tracer has a portion of the 8k
"struct task_struct".
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626362126-27775-4-git-send-email-alan.maguire@oracle.com
Add a BTF dumper for typed data, so that the user can dump a typed
version of the data provided.
The API is
int btf_dump__dump_type_data(struct btf_dump *d, __u32 id,
void *data, size_t data_sz,
const struct btf_dump_type_data_opts *opts);
...where the id is the BTF id of the data pointed to by the "void *"
argument; for example the BTF id of "struct sk_buff" for a
"struct skb *" data pointer. Options supported are
- a starting indent level (indent_lvl)
- a user-specified indent string which will be printed once per
indent level; if NULL, tab is chosen but any string <= 32 chars
can be provided.
- a set of boolean options to control dump display, similar to those
used for BPF helper bpf_snprintf_btf(). Options are
- compact : omit newlines and other indentation
- skip_names: omit member names
- emit_zeroes: show zero-value members
Default output format is identical to that dumped by bpf_snprintf_btf(),
for example a "struct sk_buff" representation would look like this:
struct sk_buff){
(union){
(struct){
.next = (struct sk_buff *)0xffffffffffffffff,
.prev = (struct sk_buff *)0xffffffffffffffff,
(union){
.dev = (struct net_device *)0xffffffffffffffff,
.dev_scratch = (long unsigned int)18446744073709551615,
},
},
...
If the data structure is larger than the *data_sz*
number of bytes that are available in *data*, as much
of the data as possible will be dumped and -E2BIG will
be returned. This is useful as tracers will sometimes
not be able to capture all of the data associated with
a type; for example a "struct task_struct" is ~16k.
Being able to specify that only a subset is available is
important for such cases. On success, the amount of data
dumped is returned.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626362126-27775-2-git-send-email-alan.maguire@oracle.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-07-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 45 non-merge commits during the last 15 day(s) which contain
a total of 52 files changed, 3122 insertions(+), 384 deletions(-).
The main changes are:
1) Introduce bpf timers, from Alexei.
2) Add sockmap support for unix datagram socket, from Cong.
3) Fix potential memleak and UAF in the verifier, from He.
4) Add bpf_get_func_ip helper, from Jiri.
5) Improvements to generic XDP mode, from Kumar.
6) Support for passing xdp_md to XDP programs in bpf_prog_run, from Zvi.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP and other connection oriented sockets have accept()
for each incoming connection on the server side, hence
they can just insert those fd's from accept() to sockmap,
which are of course established.
Now with datagram sockets begin to support sockmap and
redirection, the restriction is no longer applicable to
them, as they have no accept(). So we have to lift this
restriction for them. This is fine, because inside
bpf_sk_redirect_map() we still have another socket status
check, sock_map_redirect_allowed(), as a guard.
This also means they do not have to be removed from
sockmap when disconnecting.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210704190252.11866-3-xiyou.wangcong@gmail.com
Adding test for bpf_get_func_ip in kprobe+ofset probe.
Because of the offset value it's arch specific, enabling
the new test only for x86_64 architecture.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-9-jolsa@kernel.org
kprobes can be placed on most instructions in a function, not
just entry, and ftrace and bpftrace support the function+offset
notification for probe placement. Adding parsing of func_name
into func+offset to bpf_program__attach_kprobe() allows the
user to specify
SEC("kprobe/bpf_fentry_test5+0x6")
...for example, and the offset can be passed to perf_event_open_probe()
to support kprobe attachment.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-8-jolsa@kernel.org
Adding bpf_program__attach_kprobe_opts that does the same
as bpf_program__attach_kprobe, but takes opts argument.
Currently opts struct holds just retprobe bool, but we will
add new field in following patch.
The function is not exported, so there's no need to add
size to the struct bpf_program_attach_kprobe_opts for now.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-7-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_KPROBE programs,
so it's now possible to call bpf_get_func_ip from both kprobe and
kretprobe programs.
Taking the caller's address from 'struct kprobe::addr', which is
defined for both kprobe and kretprobe.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-5-jolsa@kernel.org
Adding bpf_get_func_ip helper for BPF_PROG_TYPE_TRACING programs,
specifically for all trampoline attach types.
The trampoline's caller IP address is stored in (ctx - 8) address.
so there's no reason to actually call the helper, but rather fixup
the call instruction and return [ctx - 8] value directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210714094400.396467-4-jolsa@kernel.org
Check that map-in-map supports bpf timers.
Check that indirect "recursion" of timer callbacks works:
timer_cb1() { bpf_timer_set_callback(timer_cb2); }
timer_cb2() { bpf_timer_set_callback(timer_cb1); }
Check that
bpf_map_release
htab_free_prealloced_timers
bpf_timer_cancel_and_free
hrtimer_cancel
works while timer cb is running.
"while true; do ./test_progs -t timer_mim; done"
is a great stress test. It caught missing timer cancel in htab->extra_elems.
timer_mim_reject.c is a negative test that checks
that timer<->map mismatch is prevented.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-12-alexei.starovoitov@gmail.com
Add bpf_timer test that creates timers in preallocated and
non-preallocated hash, in array and in lru maps.
Let array timer expire once and then re-arm it for 35 seconds.
Arm lru timer into the same callback.
Then arm and re-arm hash timers 10 times each.
At the last invocation of prealloc hash timer cancel the array timer.
Force timer free via LRU eviction and direct bpf_map_delete_elem.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-11-alexei.starovoitov@gmail.com
Introduce 'struct bpf_timer { __u64 :64; __u64 :64; };' that can be embedded
in hash/array/lru maps as a regular field and helpers to operate on it:
// Initialize the timer.
// First 4 bits of 'flags' specify clockid.
// Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, int flags);
// Configure the timer to call 'callback_fn' static function.
long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn);
// Arm the timer to expire 'nsec' nanoseconds from the current time.
long bpf_timer_start(struct bpf_timer *timer, u64 nsec, u64 flags);
// Cancel the timer and wait for callback_fn to finish if it was running.
long bpf_timer_cancel(struct bpf_timer *timer);
Here is how BPF program might look like:
struct map_elem {
int counter;
struct bpf_timer timer;
};
struct {
__uint(type, BPF_MAP_TYPE_HASH);
__uint(max_entries, 1000);
__type(key, int);
__type(value, struct map_elem);
} hmap SEC(".maps");
static int timer_cb(void *map, int *key, struct map_elem *val);
/* val points to particular map element that contains bpf_timer. */
SEC("fentry/bpf_fentry_test1")
int BPF_PROG(test1, int a)
{
struct map_elem *val;
int key = 0;
val = bpf_map_lookup_elem(&hmap, &key);
if (val) {
bpf_timer_init(&val->timer, &hmap, CLOCK_REALTIME);
bpf_timer_set_callback(&val->timer, timer_cb);
bpf_timer_start(&val->timer, 1000 /* call timer_cb2 in 1 usec */, 0);
}
}
This patch adds helper implementations that rely on hrtimers
to call bpf functions as timers expire.
The following patches add necessary safety checks.
Only programs with CAP_BPF are allowed to use bpf_timer.
The amount of timers used by the program is constrained by
the memcg recorded at map creation time.
The bpf_timer_init() helper needs explicit 'map' argument because inner maps
are dynamic and not known at load time. While the bpf_timer_set_callback() is
receiving hidden 'aux->prog' argument supplied by the verifier.
The prog pointer is needed to do refcnting of bpf program to make sure that
program doesn't get freed while the timer is armed. This approach relies on
"user refcnt" scheme used in prog_array that stores bpf programs for
bpf_tail_call. The bpf_timer_set_callback() will increment the prog refcnt which is
paired with bpf_timer_cancel() that will drop the prog refcnt. The
ops->map_release_uref is responsible for cancelling the timers and dropping
prog refcnt when user space reference to a map reaches zero.
This uref approach is done to make sure that Ctrl-C of user space process will
not leave timers running forever unless the user space explicitly pinned a map
that contained timers in bpffs.
bpf_timer_init() and bpf_timer_set_callback() will return -EPERM if map doesn't
have user references (is not held by open file descriptor from user space and
not pinned in bpffs).
The bpf_map_delete_elem() and bpf_map_update_elem() operations cancel
and free the timer if given map element had it allocated.
"bpftool map update" command can be used to cancel timers.
The 'struct bpf_timer' is explicitly __attribute__((aligned(8))) because
'__u64 :64' has 1 byte alignment of 8 byte padding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210715005417.78572-4-alexei.starovoitov@gmail.com
The variable buf is unused since commit 005edd1656 ("selftests/bpf:
convert bpf tunnel test to BPF_ADJ_ROOM_MAC"). Remove it to fix the
following warning:
test_tc_tunnel.c:531:7: warning: unused variable 'buf' [-Wunused-variable]
Fixes: 005edd1656 ("selftests/bpf: convert bpf tunnel test to BPF_ADJ_ROOM_MAC")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210713102719.8890-1-tklauser@distanz.ch
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets
in subflow receive buffers longer than necessary, delaying
MPTCP-level ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
- netfilter: conntrack: do not mark RST in the reply direction coming
after SYN packet for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison
-----BEGIN PGP SIGNATURE-----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=QFnb
-----END PGP SIGNATURE-----
Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski.
"Including fixes from bpf and netfilter.
Current release - regressions:
- sock: fix parameter order in sock_setsockopt()
Current release - new code bugs:
- netfilter: nft_last:
- fix incorrect arithmetic when restoring last used
- honor NFTA_LAST_SET on restoration
Previous releases - regressions:
- udp: properly flush normal packet at GRO time
- sfc: ensure correct number of XDP queues; don't allow enabling the
feature if there isn't sufficient resources to Tx from any CPU
- dsa: sja1105: fix address learning getting disabled on the CPU port
- mptcp: addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs
- ip_tunnel: fix mtu calculation for ETHER tunnel devices
- do not reuse skbs allocated from skbuff_fclone_cache in the napi
skb cache, we'd try to return them to the wrong slab cache
- tcp: consistently disable header prediction for mptcp
Previous releases - always broken:
- bpf: fix subprog poke descriptor tracking use-after-free
- ipv6:
- allocate enough headroom in ip6_finish_output2() in case
iptables TEE is used
- tcp: drop silly ICMPv6 packet too big messages to avoid
expensive and pointless lookups (which may serve as a DDOS
vector)
- make sure fwmark is copied in SYNACK packets
- fix 'disable_policy' for forwarded packets (align with IPv4)
- netfilter: conntrack:
- do not renew entry stuck in tcp SYN_SENT state
- do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry
- mptcp: cleanly handle error conditions with MP_JOIN and syncookies
- mptcp: fix double free when rejecting a join due to port mismatch
- validate lwtstate->data before returning from skb_tunnel_info()
- tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
- mt76: mt7921: continue to probe driver when fw already downloaded
- bonding: fix multiple issues with offloading IPsec to (thru?) bond
- stmmac: ptp: fix issues around Qbv support and setting time back
- bcmgenet: always clear wake-up based on energy detection
Misc:
- sctp: move 198 addresses from unusable to private scope
- ptp: support virtual clocks and timestamping
- openvswitch: optimize operation for key comparison"
* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
sfc: add logs explaining XDP_TX/REDIRECT is not available
sfc: ensure correct number of XDP queues
sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
net: fddi: fix UAF in fza_probe
net: dsa: sja1105: fix address learning getting disabled on the CPU port
net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
net: Use nlmsg_unicast() instead of netlink_unicast()
octeontx2-pf: Fix uninitialized boolean variable pps
ipv6: allocate enough headroom in ip6_finish_output2()
net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
net: bridge: multicast: fix MRD advertisement router port marking race
net: bridge: multicast: fix PIM hello router port marking race
net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
dsa: fix for_each_child.cocci warnings
virtio_net: check virtqueue_add_sgs() return value
mptcp: properly account bulk freed memory
selftests: mptcp: fix case multiple subflows limited by server
mptcp: avoid processing packet if a subflow reset
mptcp: fix syncookie process if mptcp can not_accept new subflow
...
When loading a BPF program with a pinned map, the loader checks whether
the pinned map can be reused, i.e. their properties match. To derive
such of the pinned map, the loader invokes BPF_OBJ_GET_INFO_BY_FD and
then does the comparison.
Unfortunately, on < 4.12 kernels the BPF_OBJ_GET_INFO_BY_FD is not
available, so loading the program fails with the following error:
libbpf: failed to get map info for map FD 5: Invalid argument
libbpf: couldn't reuse pinned map at
'/sys/fs/bpf/tc/globals/cilium_call_policy': parameter
mismatch"
libbpf: map 'cilium_call_policy': error reusing pinned map
libbpf: map 'cilium_call_policy': failed to create:
Invalid argument(-22)
libbpf: failed to load object 'bpf_overlay.o'
To fix this, fallback to derivation of the map properties via
/proc/$PID/fdinfo/$MAP_FD if BPF_OBJ_GET_INFO_BY_FD fails with EINVAL,
which can be used as an indicator that the kernel doesn't support
the latter.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210712125552.58705-1-m@lambda.lt
New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup', using per-CPU
'cgroup-switch' events with an attached BPF program that does aggregation
per-cgroup in the kernel instead of using per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for systems
having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel PT packet
decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid systems
such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts, supporting
the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI, accessible
via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when sorting
the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both when loading
the symbol table, fixing a problem processing Fedora 32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf, allowing
libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the ones
affected by the quotactl_fd syscall.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYOoHvQAKCRCyPKLppCJ+
J4hfAQCDKccPNUai/NhVFy3SQLRVRUvXFFbW1VV1nPKLJZCLkQD+MKMsUF/z7BxH
17B2O+0O3cEosFRnrpnXkmzRDHXr3Aw=
=MEIu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
After patch "mptcp: fix syncookie process if mptcp can not_accept new
subflow", if subflow is limited, MP_JOIN SYN is dropped, and no SYN/ACK
will be replied.
So in case "multiple subflows limited by server", the expected SYN/ACK
number should be 1.
Fixes: 00587187ad ("selftests: mptcp: add test cases for mptcp join tests with syn cookies")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-09
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 118 insertions(+), 62 deletions(-).
The main changes are:
1) Fix runqslower task->state access from BPF, from SanjayKumar Jeyakumar.
2) Fix subprog poke descriptor tracking use-after-free, from John Fastabend.
3) Fix sparse complaint from prior devmap RCU conversion, from Toke Høiland-Jørgensen.
4) Fix missing va_end in bpftool JIT json dump's error path, from Gu Shengxian.
5) Fix tools/bpf install target from missing runqslower install, from Wei Li.
6) Fix xdpsock BPF sample to unload program on shared umem option, from Wang Hai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ASan reported a memory leak for items of the entlist returned from scandir().
In fact, scandir() returns a malloc'd array of malloc'd dirents.
This patch adds the missing (z)frees.
Fixes: da963834fe ("perf test: Iterate over shell tests in alphabetical order")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210709163454.672082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We shouldn't just panic, return a value that doesn't clash with what
perf_evsel__open() was already returning in case of error, i.e. errno
when sys_perf_event_open() fails.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: http://lore.kernel.org/lkml/YOiOA5zOtVH9IBbE@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fixed a bug that broke the .sym-offset modifier and added a test to make
sure nothing breaks it again.
- Replace a list_del/list_add() with a list_move()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYOhMlxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quYRAQCbciaL9gQwk6lS4Rn3NkC/i1xsxv0A
q56XDPK3qyuHWQD/d6gcJ5n+Bl0OoNaDyG4UqnSGucZctYQeY4LQMzd4PQA=
=wPyY
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix and cleanup from Steven Rostedt:
"Tracing fix for histograms and a clean up in ftrace:
- Fixed a bug that broke the .sym-offset modifier and added a test to
make sure nothing breaks it again.
- Replace a list_del/list_add() with a list_move()"
* tag 'trace-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Use list_move instead of list_del/list_add
tracing/selftests: Add tests to test histogram sym and sym-offset modifiers
tracing/histograms: Fix parsing of "sym-offset" modifier
Add support to set group_fd in perf_evsel__open() and make it follow the
group setup.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some different PMU types may have the same substring. For example, on
Icelake server we have PMU types "uncore_imc" and
"uncore_imc_free_running". Both PMU types have the substring
"uncore_imc". But the parser wrongly thinks they are the same PMU type.
We enable an imc event,
perf stat -e uncore_imc/event=0xe3/ -a -- sleep 1
Perf actually expands the event to:
uncore_imc_0/event=0xe3/
uncore_imc_1/event=0xe3/
uncore_imc_2/event=0xe3/
uncore_imc_3/event=0xe3/
uncore_imc_4/event=0xe3/
uncore_imc_5/event=0xe3/
uncore_imc_6/event=0xe3/
uncore_imc_7/event=0xe3/
uncore_imc_free_running_0/event=0xe3/
uncore_imc_free_running_1/event=0xe3/
uncore_imc_free_running_3/event=0xe3/
uncore_imc_free_running_4/event=0xe3/
That's because the "uncore_imc_free_running" matches the
pattern "uncore_imc*".
Now we check that the last characters of PMU name is '_<digit>'.
For example, for pattern "uncore_imc*", "uncore_imc_0" is parsed ok, but
"uncore_imc_free_running_0" fails.
Fixes: b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic pmu events")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210701064253.1175-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some symbols may not be resolved if a user only monitors one type of
PMU.
$ sudo perf record -e cpu_atom/branch-instructions/ ./big_small_workload
$ sudo perf report –stdio
# Overhead Command Shared Object Symbol
# ........ ......... ................. .....................
#
28.02% perf-exec [unknown] [.] 0x0000000000401cf6
11.32% perf-exec [unknown] [.] 0x0000000000401d04
10.90% perf-exec [unknown] [.] 0x0000000000401d11
10.61% perf-exec [unknown] [.] 0x0000000000401cfc
To parse symbols the metadata records, e.g., PERF_RECORD_COMM, which are
generated by the kernel, are required.
To decide whether to generate the metadata records, the kernel relies on
the event_filter_match() to filter the unrelated events.
On a hybrid system, event_filter_match() further checks the CPU mask of
the current enabled PMU. If an event is collected on the CPU which
doesn't have an enabled PMU, it's treated as an unrelated event.
The "big_small_workload" is created in a big core, but runs on a small
core. The metadata records are filtered, because the user only monitors
the PMU of the small core. The big core PMU is not enabled.
For a hybrid system, a dummy event is required to generate the complete
side-band events.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1625760212-18441-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors.
The Topdown metrics L1 event was added as default in 42641d6f4d
("perf stat: Add Topdown metrics events as default events")
From the Sapphire Rapids server and later platforms, the same dedicated
"metrics" register is extended to support both L1 and L2 events.
Add both L1 and L2 Topdown metrics events as default to enrich the
default measuring information if the new measurement register is
available.
On legacy systems there is no change to avoid extra multiplexing.
The topdown_level indicates the max metrics level for the top-down
statistics. Set it to 2 to display all L1 and L2 Topdown metrics events.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.59 msec task-clock # 0.001 CPUs utilized
1 context-switches # 1.687 K/sec
0 cpu-migrations # 0.000 /sec
76 page-faults # 128.198 K/sec
1,405,318 cycles # 2.371 GHz
1,471,136 instructions # 1.05 insn per cycle
310,132 branches # 523.136 M/sec
10,435 branch-misses # 3.36% of all branches
8,431,908 slots # 14.223 G/sec
1,554,116 topdown-retiring # 18.4% retiring
1,289,585 topdown-bad-spec # 15.2% bad speculation
2,810,636 topdown-fe-bound # 33.2% frontend bound
2,810,636 topdown-be-bound # 33.2% backend bound
231,464 topdown-heavy-ops # 2.7% heavy operations # 15.6% light operations
1,223,453 topdown-br-mispredict # 14.5% branch mispredict # 0.8% machine clears
1,884,779 topdown-fetch-lat # 22.3% fetch latency # 10.9% fetch bandwidth
1,454,917 topdown-mem-bound # 17.2% memory bound # 16.0% Core bound
1.001179699 seconds time elapsed
0.000000000 seconds user
0.001238000 seconds sys
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1625760169-18396-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the implementation of evlist__set_leader() to a new libperf
perf_evlist__set_leader() function with the same functionality make it a
libperf exported API.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::nr_groups to perf_evsel::nr_groups, so we can move the group
interface to libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::leader to perf_evsel::leader, so we can move the group
interface to libperf.
Also add several evsel helpers to ease up the transition:
struct evsel *evsel__leader(struct evsel *evsel);
- get leader evsel
bool evsel__has_leader(struct evsel *evsel, struct evsel *leader);
- true if evsel has leader as leader
bool evsel__is_leader(struct evsel *evsel);
- true if evsel is itw own leader
void evsel__set_leader(struct evsel *evsel, struct evsel *leader);
- set leader for evsel
Committer notes:
Fix this when building with 'make BUILD_BPF_SKEL=1'
tools/perf/util/bpf_counter.c
- if (evsel->leader->core.nr_members > 1) {
+ if (evsel->core.leader->nr_members > 1) {
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
