Now that we've finished adding allocation groups to the realtime volume,
let's make the file block mapping address (xfs_rtblock_t) a segmented
value just like we do on the data device. This means that group number
and block number conversions can be done with shifting and masking
instead of integer division.
While in theory we could continue caching the rgno shift value in
m_rgblklog, the fact that we now always use the shift value means that
we have an opportunity to increase the redundancy of the rt geometry by
storing it in the ondisk superblock and adding more sb verifier code.
Extend the sueprblock to store the rgblklog value.
Now that we have segmented addresses, set the correct values in
m_groups[XG_TYPE_RTG] so that the xfs_group helpers work correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We're about to segment xfs_rtblock_t addresses, so we must create
type-specific helpers to do rt extent rounding of file mapping block
lengths because the rtb helpers soon will not do the right thing there.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We're about to segment xfs_rtblock_t addresses, so we must create
type-specific helpers to do rt extent rounding of file block offsets
because the rtb helpers soon will not do the right thing there.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Set the rtbitmap and summary file inumbers to NULLFSINO in the
superblock and make sure they're zeroed whenever we write the superblock
to disk, to mimic mkfs behavior.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add the code we need to scan the metadata directory paths of rt group
metadata files.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Repair the realtime superblock if it has become out of date with the
primary superblock.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The bmbt scrubber will combine file mappings if they are mergeable to
reduce the number of cross-referencing checks. However, we shouldn't
combine mappings that cross rt group boundaries because that will cause
verifiers to trip incorrectly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make the allocator rtgroup aware by either picking a specific group if
there is a hint, or loop over all groups otherwise. A simple rotor is
provided to pick the placement for initial allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Unlike AGs, RTGs don't always have metadata in their first blocks, and
thus we don't get automatic protection from merging I/O completions
across RTG boundaries. Add code to set the IOMAP_F_BOUNDARY flag for
ioends that start at the first block of a RTG so that they never get
merged into the previous ioend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When rmap is enabled, XFS expects a certain order of operations, which
is: 1) remove the file mapping, 2) remove the reverse mapping, and then
3) free the blocks. When reflink is enabled, XFS replaces (3) with a
deferred refcount decrement operation that can schedule freeing the
blocks if that was the last refcount.
For realtime files, xfs_bmap_del_extent_real tries to do 1 and 3 in the
same transaction, which will break both rmap and reflink unless we
switch it to use realtime EFIs. Both rmap and reflink depend on the
rtgroups feature, so let's turn on EFIs for all rtgroups filesystems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A handful of fstests expect to be able to test what happens when extent
free intents fail to actually free the extent. Now that we're
supporting EFIs for realtime extents, add to xfs_rtfree_extent the same
injection point that exists in the regular extent freeing code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Teach the EFI mechanism how to free realtime extents. We're going to
need this to enforce proper ordering of operations when we enable
realtime rmap.
Declare a new log intent item type (XFS_LI_EFI_RT) and a separate defer
ops for rt extents. This keeps the ondisk artifacts and processing code
completely separate between the rt and non-rt cases. Hopefully this
will make it easier to debug filesystem problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_swap_extent_rmap does not use log items to track the overall
progress of an attempt to swap the extent mappings between two files.
If the system crashes in the middle of swapping a partially written
realtime extent, the mapping will be left in an inconsistent state
wherein a file can point to multiple extents on the rt volume.
The new file range exchange functionality handles this correctly, so all
callers must upgrade to that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make the bmap intent items take an active reference to the rtgroup
containing the space that is being mapped or unmapped. We will need
this functionality once we start enabling rmap and reflink on the rt
volume. Technically speaking we need it even for !rtgroups filesystems
to prevent the (dummy) rtgroup 0 from going away, even though this will
never happen.
As a bonus, we can rework the xfs_bmap_deferred_class tracepoint to use
the xfs_group object to figure out the type and group number, widen the
group block number field to fit 64-bit quantities, and get rid of the
now redundant opdev and rtblock fields.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Enable growing the rt section when realtime groups are enabled.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, the ondisk realtime summary file counters are accessed in
units of 32-bit words. There's no endian translation of the contents of
this file, which means that the Bad Things Happen(tm) if you go from
(say) x86 to powerpc. Since we have a new feature flag, let's take the
opportunity to enforce an endianness on the file. Encode the summary
information in big endian format, like most of the rest of the
filesystem.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, the ondisk realtime bitmap file is accessed in units of
32-bit words. There's no endian translation of the contents of this
file, which means that the Bad Things Happen(tm) if you go from (say)
x86 to powerpc. Since we have a new feature flag, let's take the
opportunity to enforce an endianness on the file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Upgrade rtbitmap and rtsummary blocks to have self describing metadata
like most every other thing in XFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an ioctl so that the kernel can report the status of realtime
groups to userspace.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Record the state of per-rtgroup metadata sickness in the rtgroup
structure for later reporting.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert these arrays to use ARRAY_SIZE insteead of requiring an empty
sentinel array element at the end. This saves memory and would have
avoided a bug that worked its way into the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Make the free rt extent count a part of the lazy sb counters when the
realtime groups feature is enabled. This is possible because the patch
to recompute frextents from the rtbitmap during log recovery predates
the code adding rtgroup support, hence we know that the value will
always be correct during runtime.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Except for the rt superblock, realtime groups do not store any metadata
at the start (or end) of the group. There is nothing to prevent the
bmap code from merging allocations from multiple groups into a single
bmap record. Add a helper to check for this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: massage the commit message after pulling this into rtgroups]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Check that rt block pointers do not point to the realtime superblock and
that allocated rt space extents do not cross rtgroup boundaries.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Export the realtime geometry information so that userspace can query it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Every time we update parts of the primary filesystem superblock that are
echoed in the rt superblock, we must update the rt super. Avoid
changing the log to support logging to the rt device by using ordered
buffers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Check the realtime superblock at mount time, to ensure that the label
and uuids actually match the primary superblock on the data device. If
the rt superblock is good, attach it to the xfs_mount so that the log
can use ordered buffers to keep this primary in sync with the primary
super on the data device.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define the ondisk format of realtime group metadata, and a superblock
for realtime volumes. rt supers are conditionally enabled by a
predicate function so that they can be disabled if we ever implement
zoned storage support for the realtime volume.
For rt group enabled file systems there is a separate bitmap and summary
file for each group and thus the number of bitmap and summary blocks
needs to be calculated differently.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
FITRIM on xfs has this bizarro uapi where we flatten all the physically
addressable storage across two block devices into a linear address
space. In this address space, the realtime device comes immediately
after the data device. Therefore, the xfs_trim_rtdev_extents has to
convert its input parameters from the linear address space to actual
rtdev block addresses on the realtime volume.
Right now the address space conversion is done in units of rtblocks.
However, a future patchset will convert xfs_rtblock_t to be a segmented
address space (group:blkno) like the data device. Change the conversion
code to be done in units of daddrs since those will never be segmented.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To prepare for adding per-rtgroup bitmap files, make the xfs_rtxnum_t
type encode the RT extent number relative to the rtgroup. The biggest
part of this to clearly distinguish between the relative extent number
that gets masked when converting from a global block number and length
values that just have a factor applied to them when converting from
file system blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Make xfs_rtsummary_blockcount take all the required information from
the mount structure and return the number of summary levels from it
as well. This cleans up many of the callers and prepares for making the
rtsummary files per-rtgroup where they need to look at different value.
This means we recalculate some values in some callers, but as all these
calculations are outside the fast path and cheap, which seems like a
price worth paying.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Rename the existing xfs_rtbitmap_blockcount to
xfs_rtbitmap_blockcount_len and add a new xfs_rtbitmap_blockcount wrapper
around it that takes the number of extents from the mount structure.
This will simplify the move to per-rtgroup bitmaps as those will need to
pass in the number of extents per rtgroup instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the check that the rtsummary fits into the log into a separate
helper, and use xfs_growfs_rt_alloc_fake_mount to calculate the new RT
geometry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: avoid division for the 0-rtx growfs check]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use xfs_growfs_rt_alloc_fake_mount instead of manually recalculating
the RT bitmap geometry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the code to set up a fake mount point to calculate new RT
geometry out of xfs_growfs_rt_bmblock so that it can be reused.
Note that this changes the rmblocks calculation method to be based
on the passed in rblocks and extsize and not the explicitly passed
one, but both methods will always lead to the same result. The new
version just does a little bit more math while being more general.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use the on-disk rextents to calculate the bitmap and summary blocks
instead of the calculated one so that we can refactor the helpers for
calculating them.
As the RT bitmap and summary scrubbers already check that sb_rextents
match the block count this does not change coverage of the scrubber.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Now that we've centralized the realtime metadata locking routines, get
rid of the ILOCK subclasses since we now use explicit lockdep classes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To support adding new RT groups in growfs, we need to be able to create
the per-RT group files. Add a new xfs_rtginode_create helper to create
a given per-RTG file. Most of the code for that is shared, but the
details of the actual file are abstracted out using a new create method
in struct xfs_rtginode_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Move the pointers to the RT bitmap and summary inodes as well as the
summary cache to the rtgroups structure to prepare for having a
separate bitmap and summary inodes for each rtgroup.
Code using the inodes now needs to operate on a rtgroup. Where easily
possible such code is converted to iterate over all rtgroups, else
rtgroup 0 (the only one that can currently exist) is hardcoded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split xfs_trim_rtdev_extents into two parts to prepare for reusing the
main validation also for RT group aware file systems.
Use the fully features xfs_daddr_to_rtb helper to convert from a daddr
to a xfs_rtblock_t to prepare for segmented addressing in RT groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use mp->m_sb.sb_rblocks to calculate the end instead of sb_rextents that
needs a conversion, use consistent names to xfs_rtblock_t types, and
only calculated them by the time they are needed. Remove the pointless
"high" local variable that only has a single user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split out a helper to allocate or grow the rtbitmap and rtsummary files
in preparation of per-RT group bitmap and summary files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
RT group enabled file systems fix the bug where we pointlessly attach
quotas to the RT bitmap and summary files. Split the code to detach the
quotas into a helper, make it conditional and document the differing
behavior for RT group and pre-RT group file systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the RT extent freeing logic from xfs_bmap_del_extent_real because
it will become more complicated when adding RT group.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Create a state tracking structure and helpers to initialize the tracking
structure so that we can check metadata records against the realtime
space management metadata. Right now this is limited to grabbing the
incore rtgroup object, but we'll eventually add to the tracking
structure the ILOCK state and btree cursors.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create the necessary per-rtgroup infrastructure that we need to load
metadata inodes into memory.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a dynamic lockdep class key for rtgroup inodes. This will enable
lockdep to deduce inconsistencies in the rtgroup metadata ILOCK locking
order. Each class can have 8 subclasses, and for now we will only have
2 inodes per group. This enables rtgroup order and inode order checks
when nesting ILOCKs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define helper functions to lock all metadata inodes related to a
realtime group. There's not much to look at now, but this will become
important when we add per-rtgroup metadata files and online fsck code
for them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create an incore object that will contain information about a realtime
allocation group. This will eventually enable us to shard the realtime
section in a similar manner to how we shard the data section, but for
now just a single object for the entire RT subvolume is created.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
