Commit Graph

2607 Commits

Author SHA1 Message Date
Rameshkumar Sundaram
a5199b5626 cfg80211: hold bss_lock while updating nontrans_list
Synchronize additions to nontrans_list of transmitting BSS with
bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails
__cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert
on bss_lock). So protect the whole block with bss_lock to avoid
races and warnings. Found during code review.

Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649668071-9370-1-git-send-email-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11 11:55:36 +02:00
Johannes Berg
6624bb34b4 nl80211: correctly check NL80211_ATTR_REG_ALPHA2 size
We need this to be at least two bytes, so we can access
alpha2[0] and alpha2[1]. It may be three in case some
userspace used NUL-termination since it was NLA_STRING
(and we also push it out with NUL-termination).

Cc: stable@vger.kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11 11:55:33 +02:00
Jakub Kicinski
0b3660695e brcmfmac
* add BCM43454/6 support
 
 rtw89
  * add support for 160 MHz channels and 6 GHz band
  * hardware scan support
 
 iwlwifi
  * support UHB TAS enablement via BIOS
  * remove a bunch of W=1 warnings
  * add support for channel switch offload
  * support 32 Rx AMPDU sessions in newer devices
  * add support for a couple of new devices
  * add support for band disablement via BIOS
 
 mt76
  * mt7915 thermal management improvements
  * SAR support for more mt76 drivers
  * mt7986 wmac support on mt7915
 
 ath11k
  * debugfs interface to configure firmware debug log level
  * debugfs interface to test Target Wake Time (TWT)
  * provide 802.11ax High Efficiency (HE) data via radiotap
 
 ath9k
  * use hw_random API instead of directly dumping into random.c
 
 wcn36xx
  * fix wcn3660 to work on 5 GHz band
 
 ath6kl
  * add device ID for WLU5150-D81
 
 cfg80211/mac80211
  * initial EHT (from 802.11be) support
    (EHT rates, 320 MHz, larger block-ack)
  * support disconnect on HW restart
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmIrQoUACgkQB8qZga/f
 l8SV9RAAhZwiX4tkcjOYh3vDCOlmZRZV7dy0CYtcRlyHvO/4xH0DJUCbItW3hkeY
 HwLeaTE9J6INCui/iWbWVWsBKoiYQHEWxbfLYg6xDeQR4ijYQaz1c9inevu6qdOn
 3STKzBjsJ8uQF81ANjTFsL33B9olceIrHttqVI0Ezv6YlAQ1JYRNBBikh8NM+XPN
 /AUdsG9KyWRuraPbPf1sZapMJBGpvDMhKlo8LW08Xv9sC8to57Tw5AHVwMY71Ipu
 ClE0EyDGYRm8W+cbJvZ1bp7D/TGcIspAdpPR9JAznXWeFhyl6bswGtUsf3FGxXNk
 1i+1tonRlL3Xi9CvXDmGk2fstYe4MSmWXVFehoulMY9F2C1ibp6PrLa8SLjC+wzu
 1QDfM65ggc90uu0AJLTOp9qnkapvz3/FGL5z9sx2OEM1Iks2RwOpbB6gKo+C0A9W
 3wMxgPPt4mMV2WIgYv1okfcghUoH2l3b1n+Iq+osOa9pbdLrMhvzsrhIQZBaFnBa
 3S5yhGh8djEla2+FmmMs0RKvRX+m+FeVjkJ8ozPLZl880A0OLmZZ+6Wnoa3ZQHmi
 AkuOLhCGm3PVXCN8Mb0nwHmc+LJS/V/U5VBDzieOXMKM4OjMlbGQNt4+2bEJ+Qd3
 jlTkt1cLI/gFvdoFmsJUEOrpT49qZ94obmX8u07pEO/fI+bXHF4=
 =ccps
 -----END PGP SIGNATURE-----

Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
brcmfmac
 * add BCM43454/6 support

rtw89
 * add support for 160 MHz channels and 6 GHz band
 * hardware scan support

iwlwifi
 * support UHB TAS enablement via BIOS
 * remove a bunch of W=1 warnings
 * add support for channel switch offload
 * support 32 Rx AMPDU sessions in newer devices
 * add support for a couple of new devices
 * add support for band disablement via BIOS

mt76
 * mt7915 thermal management improvements
 * SAR support for more mt76 drivers
 * mt7986 wmac support on mt7915

ath11k
 * debugfs interface to configure firmware debug log level
 * debugfs interface to test Target Wake Time (TWT)
 * provide 802.11ax High Efficiency (HE) data via radiotap

ath9k
 * use hw_random API instead of directly dumping into random.c

wcn36xx
 * fix wcn3660 to work on 5 GHz band

ath6kl
 * add device ID for WLU5150-D81

cfg80211/mac80211
 * initial EHT (from 802.11be) support
   (EHT rates, 320 MHz, larger block-ack)
 * support disconnect on HW restart

* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
  mac80211: Add support to trigger sta disconnect on hardware restart
  mac80211: fix potential double free on mesh join
  mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
  nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
  mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  rtw89: 8852c: process logic efuse map
  rtw89: 8852c: process efuse of phycap
  rtw89: support DAV efuse reading operation
  rtw89: 8852c: add chip::dle_mem
  rtw89: add page_regs to handle v1 chips
  rtw89: add chip_info::{h2c,c2h}_reg to support more chips
  rtw89: add hci_func_en_addr to support variant generation
  rtw89: add power_{on/off}_func
  rtw89: read chip version depends on chip ID
  rtw89: pci: use a struct to describe all registers address related to DMA channel
  rtw89: pci: add V1 of PCI channel address
  rtw89: pci: add struct rtw89_pci_info
  rtw89: 8852c: add 8852c empty files
  MAINTAINERS: add devicetree bindings entry for mt76
  ...

====================

Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11 13:00:17 -08:00
Sebastian Andrzej Siewior
f9834dbdd3 wireless: Use netif_rx().
Since commit
   baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-06 11:05:31 +00:00
Jakub Kicinski
80901bff81 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/batman-adv/hard-interface.c
  commit 690bb6fb64 ("batman-adv: Request iflink once in batadv-on-batadv check")
  commit 6ee3c393ee ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/

net/smc/af_smc.c
  commit 4d08b7b57e ("net/smc: Fix cleanup when register ULP fails")
  commit 462791bbfa ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03 11:55:12 -08:00
Sreeramya Soratkal
e50b88c4f0 nl80211: Update bss channel on channel switch for P2P_CLIENT
The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.

Update the bss channel after CSA channel switch completion for P2P client
interface as well.

Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-02 22:37:05 +01:00
Johannes Berg
a12f76345e cfg80211: fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo
The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.

Fixes: 129ab0d2d9 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01 14:10:14 +01:00
Jiasheng Jiang
6ad27f522c nl80211: Handle nla_memdup failures in handle_nan_filter
As there's potential for failure of the nla_memdup(),
check the return value.

Fixes: a442b761b2 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01 11:15:08 +01:00
Jakub Kicinski
6b5567b1b2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17 11:44:20 -08:00
Ilan Peer
ea05fd3581 cfg80211: Support configuration of station EHT capabilities
Add attributes and some code bits to support userspace passing
in EHT capabilities of stations.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20220214173004.ecf0b3ff9627.Icb4a5f2ec7b41d9008ac4cfc16c59baeb84793d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:43:25 +01:00
Ilan Peer
31846b6578 cfg80211: add NO-EHT flag to regulatory
This may be necessary in some cases, add a flag and propagate
it, just like the NO-HE that already exists.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[split off from a combined 320/no-EHT patch]
Link: https://lore.kernel.org/r/20220214173004.dbb85a7b86bb.Ifc1e2daac51c1cc5f895ccfb79faf5eaec3950ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:43:14 +01:00
Sriram R
c2b3d7699f nl80211: add support for 320MHz channel limitation
Add support to advertise drivers or regulatory limitations on 320 MHz
channels to userspace.

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-authored-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com>
Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1640163883-12696-6-git-send-email-quic_vjakkam@quicinc.com
Link: https://lore.kernel.org/r/20220214163009.175289-3-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:43:02 +01:00
Veerendranath Jakkam
cfb14110ac nl80211: add EHT MCS support
Add support for reporting and calculating EHT bitrates.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1640163883-12696-7-git-send-email-quic_vjakkam@quicinc.com
Link: https://lore.kernel.org/r/20220214163009.175289-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:42:52 +01:00
Jia Ding
3743bec612 cfg80211: Add support for EHT 320 MHz channel width
Add 320 MHz support in the channel def and center frequency validation
with compatible check.

Signed-off-by: Jia Ding <quic_jiad@quicinc.com>
Co-authored-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-authored-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1640163883-12696-5-git-send-email-quic_vjakkam@quicinc.com
Link: https://lore.kernel.org/r/20220214163009.175289-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:42:39 +01:00
Ilan Peer
5cd5a8a3e2 cfg80211: Add data structures to capture EHT capabilities
And advertise EHT capabilities to user space when supported.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20220214173004.6fb70658529f.I2413a37c8f7d2d6d638038a3d95360a3fce0114d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:42:29 +01:00
Johannes Berg
a3a20feb32 nl80211: accept only HE capability elements with valid size
The kernel (driver code) should be able to assume that a station's
HE capabilities are not badly sized, so reject them if they are.

Link: https://lore.kernel.org/r/20220214172921.80b710d45cb7.Id57ce32f9538a40e36c620fabedbd2c73346ef56@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:41:06 +01:00
Johannes Berg
024fcf5efd nl80211: use RCU to read regdom in reg get/dump
Use RCU here to read the regdomain, this will allow us
to remove the RTNL locking from the setter.

Note in nl80211_get_reg_do() we still need the RTNL to
do the wiphy lookup.

Link: https://lore.kernel.org/r/20220214101820.5d4acbcf2a46.Ibfc91980439862125e983d9adeebaba73fe38e2d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16 15:40:11 +01:00
Johannes Berg
f0a6fd1527 cfg80211: fix race in netlink owner interface destruction
My previous fix here to fix the deadlock left a race where
the exact same deadlock (see the original commit referenced
below) can still happen if cfg80211_destroy_ifaces() already
runs while nl80211_netlink_notify() is still marking some
interfaces as nl_owner_dead.

The race happens because we have two loops here - first we
dev_close() all the netdevs, and then we destroy them. If we
also have two netdevs (first one need only be a wdev though)
then we can find one during the first iteration, close it,
and go to the second iteration -- but then find two, and try
to destroy also the one we didn't close yet.

Fix this by only iterating once.

Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Fixes: ea6b2098dd ("cfg80211: fix locking in netlink owner interface destruction")
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220201130951.22093-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04 16:31:44 +01:00
Johannes Berg
1b198233a3 cfg80211: pmsr: remove useless ifdef guards
This isn't a header file, I guess I must've copied from
the header file and forgotten to remove the guards.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.330d03623b08.Idda91cd6f1c7bd865a50c47d408e5cdab0fd951f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04 16:26:16 +01:00
Avraham Stern
5666ee154f cfg80211: don't add non transmitted BSS to 6GHz scanned channels
When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04 16:24:41 +01:00
Johannes Berg
667aa74264 cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAP
There's currently only one driver that reports CHECKSUM_COMPLETE,
that is iwlwifi. The current hardware there calculates checksum
after the SNAP header, but only RFC 1042 (and some other cases,
but replicating the exact hardware logic for corner cases in the
driver seemed awkward.)

Newer generations of hardware will checksum _including_ the SNAP,
which makes things easier.

To handle that, simply always assume the checksum _includes_ the
SNAP header, which this patch does, requiring to first add it
for older iwlwifi hardware, and then remove it again later on
conversion.

Alternatively, we could have:

 1) Always assumed the checksum starts _after_ the SNAP header;
    the problem with this is that we'd have to replace the exact
    "what is the SNAP" check in iwlwifi that cfg80211 has.

 2) Made it configurable with some flag, but that seemed like too
    much complexity.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04 16:23:19 +01:00
Linus Torvalds
fd6f57bfda Kbuild updates for v5.17
- Add new kconfig target 'make mod2noconfig', which will be useful to
    speed up the build and test iteration.
 
  - Raise the minimum supported version of LLVM to 11.0.0
 
  - Refactor certs/Makefile
 
  - Change the format of include/config/auto.conf to stop double-quoting
    string type CONFIG options.
 
  - Fix ARCH=sh builds in dash
 
  - Separate compression macros for general purposes (cmd_bzip2 etc.) and
    the ones for decompressors (cmd_bzip2_with_size etc.)
 
  - Misc Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmHnFNIVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGiQEP/1tkt9IHP7vFvkN9xChQI8HQ7HOC
 mPIxBAUzHIp1V2IALb0lfojjnpkzcMNpJZVlmqjgyYShLEPPBFwKVXs1War6GViX
 aprUMz7w1zR/vZJ2fplFmrkNwSxNp3+LSE6sHVmsliS4Vfzh7CjHb8DnaKjBvQLZ
 M+eQugjHsWI3d3E81/qtRG5EaVs6q8osF3b0Km59mrESWVYKqwlUP3aUyQCCUGFK
 mI+zC4SrHH6EAIZd//VpaleXxVtDcjjadb7Iru5MFhFdCBIRoSC3d1IWPUNUKNnK
 i0ocDXuIoAulA/mROgrpyAzLXg10qYMwwTmX+tplkHA055gKcY/v4aHym6ypH+TX
 6zd34UMTLM32LSjs8hssiQT8BiZU0uZoa/m2E9IBaiExA2sTsRZxgQMKXFFaPQJl
 jn4cRiG0K1NDeRKtq4xh2WO46OS4sPlR6zW9EXDEsS/bI05Y7LpUz7Flt6iA2Mq3
 0g8uYIYr/9drl96X83tFgTkxxB6lpB29tbsmsrKJRGxvrCDnAhXlXhPCkMajkm2Q
 PjJfNtMFzwemSZWq09+F+X5BgCjzZtroOdFI9FTMNhGWyaUJZXCtcXQ6UTIKnTHO
 cDjcURvh+l56eNEQ5SMTNtAkxB+pX8gPUmyO1wLwRUT4YodxylkTUXGyBBR9tgTn
 Yks1TnPD06ld364l
 =8BQf
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...
2022-01-19 11:15:19 +02:00
Masahiro Yamada
129ab0d2d9 kbuild: do not quote string values in include/config/auto.conf
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.

Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.

Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):

    CONFIG_X="foo bar"

Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.

There are some patterns:

  [1] $(patsubst "%",%,$(CONFIG_X))
  [2] $(CONFIG_X:"%"=%)
  [3] $(subst ",,$(CONFIG_X))
  [4] $(shell echo $(CONFIG_X))

These are not only ugly, but also fragile.

[1] and [2] do not work if the value contains spaces, like
   CONFIG_X=" foo bar "

[3] does not work correctly if the value contains double-quotes like
   CONFIG_X="foo\"bar"

[4] seems to work better, but has a cost of forking a process.

Anyway, quoted strings were always PITA for our Makefiles.

This commit changes Kconfig to stop quoting in include/config/auto.conf.

These are the string type symbols referenced in Makefiles or scripts:

    ACPI_CUSTOM_DSDT_FILE
    ARC_BUILTIN_DTB_NAME
    ARC_TUNE_MCPU
    BUILTIN_DTB_SOURCE
    CC_IMPLICIT_FALLTHROUGH
    CC_VERSION_TEXT
    CFG80211_EXTRA_REGDB_KEYDIR
    EXTRA_FIRMWARE
    EXTRA_FIRMWARE_DIR
    EXTRA_TARGETS
    H8300_BUILTIN_DTB
    INITRAMFS_SOURCE
    LOCALVERSION
    MODULE_SIG_HASH
    MODULE_SIG_KEY
    NDS32_BUILTIN_DTB
    NIOS2_DTB_SOURCE
    OPENRISC_BUILTIN_DTB
    SOC_CANAAN_K210_DTB_SOURCE
    SYSTEM_BLACKLIST_HASH_LIST
    SYSTEM_REVOCATION_KEYS
    SYSTEM_TRUSTED_KEYS
    TARGET_CPU
    UNUSED_KSYMS_WHITELIST
    XILINX_MICROBLAZE0_FAMILY
    XILINX_MICROBLAZE0_HW_VER
    XTENSA_VARIANT_NAME

I checked them one by one, and fixed up the code where necessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-08 18:03:57 +09:00
Jakub Kicinski
294e70c952 This time we have:
* ndo_fill_forward_path support in mac80211, to let
    drivers use it
  * association comeback notification for userspace,
    to be able to react more sensibly to long delays
  * support for background radar detection hardware
    in some chipsets
  * SA Query Procedures offload on the AP side
  * more logging if we find problems with HT/VHT/HE
  * various cleanups and minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmHBuIoACgkQB8qZga/f
 l8SDNQ//bWl1fnVTzXcva16NGXNtQc8ufOdDfEHsusTA0qP1EfCDfhiMmRZ+jUQH
 Xdg7F3Yube0fgij1sEgpcoVOFm5wr7p861nljR8m71t9FI832gfd+qdCJicNxGGI
 B3zEhHCkcZ4yBhT35+cKG/H3WBysI8RO65dC6NVlzCyY1iM9TVkHBtbEKrdNljcM
 cKKWRp/fk7lCRVqLtunUd5kJauwJxjwHOm4GTH5BajbT/06m91GLoj/tZEjr9rQL
 aSsBa1nR0/LcMyYbbQYIxLikTZnkzILIJGLakb7k5ZJ2W4/hUv0Zn6LUCyMDM1mK
 7+Bt6qvB3Wz/TwjKYDm2qOniaD4IDVOtEpVPaXGau8c5Cj6rjnJ/cgF3ydBk4+xB
 5xngZBCk6Y4+epg9V7EWfqmV0vVqlWqfUfARwPulLWA1X15mVVBmcrafGEaLvGrC
 mvkq0n0XZzf+ObrILK7yjafOdLC4ATCj8j6RW85mH4yU+PqKrx3gOCrWn3Zm+6BN
 n6y7vs5x6zEitqjap4zsiVxqJf3jtAVcdVy7k52VF2BBpF8xoyrIMYZw5CNUG2Jv
 aTmW5aE8X9mQ2VT88JewZst0IX4jjfK/B8wOj24tokC2mXRdM5uKTOWK7uTFQJfM
 lLFcRYzo6n6epHrA5oBN4SnQ3/QpZNJOEsRxyROXemDxnQ9de+w=
 =u1jf
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
This time we have:
 * ndo_fill_forward_path support in mac80211, to let drivers use it
 * association comeback notification for userspace, to be able
   to react more sensibly to long delays
 * support for background radar detection hardware in some chipsets
 * SA Query Procedures offload on the AP side
 * more logging if we find problems with HT/VHT/HE
 * various cleanups and minor fixes

Conflicts:

net/wireless/reg.c:
  e08ebd6d7b ("cfg80211: Acquire wiphy mutex on regulatory work")
  701fdfe348 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface")
  https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au

drivers/net/wireless/ath/ath10k/wmi.c:
  7f599aeccb ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel")
  3bf2537ec2 ("ath10k: drop beacon and probe response which leak from other channel")
  https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au

* tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits)
  cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface
  rfkill: allow to get the software rfkill state
  cfg80211: refactor cfg80211_get_ies_channel_number()
  nl82011: clarify interface combinations wrt. channels
  nl80211: Add support to offload SA Query procedures for AP SME device
  nl80211: Add support to set AP settings flags with single attribute
  mac80211: add more HT/VHT/HE state logging
  cfg80211: Use the HE operation IE to determine a 6GHz BSS channel
  cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard
  mac80211: Notify cfg80211 about association comeback
  cfg80211: Add support for notifying association comeback
  mac80211: introduce channel switch disconnect function
  cfg80211: Fix order of enum nl80211_band_iftype_attr documentation
  cfg80211: simplify cfg80211_chandef_valid()
  mac80211: Remove a couple of obsolete TODO
  mac80211: fix FEC flag in radio tap header
  mac80211: use coarse boottime for airtime fairness code
  ieee80211: change HE nominal packet padding value defines
  cfg80211: use ieee80211_bss_get_elem() instead of _get_ie()
  mac80211: Use memset_after() to clear tx status
  ...
====================

Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21 07:41:52 -08:00
Sriram R
701fdfe348 cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface
Currently cfg80211 checks for invalid channels whenever there is a
regulatory update and stops the active interfaces if it is operating on
an unsupported channel in the new regulatory domain.

This is done based on a regulatory flag REGULATORY_IGNORE_STALE_KICKOFF
set during wiphy registration which disables this enforcement when
unsupported interface modes are supported by driver.

Add support to enable this enforcement when Mesh Point interface type
is advertised by drivers.

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/1638409120-28997-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 11:18:30 +01:00
Johannes Berg
75cca1fac2 cfg80211: refactor cfg80211_get_ies_channel_number()
Now that this is no longer part of the bigger function,
we can get rid of the channel_num variable. Also change
the function to use the struct element helpers, instead
of open-coding the element handling.

Link: https://lore.kernel.org/r/20211202130913.a0adf67a9319.I6db0340a34fff18d78e9cd512f4abf855da4e43a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:57:19 +01:00
Veerendranath Jakkam
47301a74bb nl80211: Add support to set AP settings flags with single attribute
In previous method each AP settings flag is represented by a top-level
flag attribute and conversion to enum cfg80211_ap_settings_flags had to
be done before sending them to driver. This commit is to make it easier
to define new AP settings flags and sending them to driver.

This commit also deprecate sending of
%NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP. But to
maintain backwards compatibility checks for
%NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in %NL80211_CMD_START_AP when
%NL80211_ATTR_AP_SETTINGS_FLAGS not present in %NL80211_CMD_START_AP.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
Link: https://lore.kernel.org/r/1637911519-21306-1-git-send-email-vjakkam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:41:26 +01:00
Ayala Beker
7f599aeccb cfg80211: Use the HE operation IE to determine a 6GHz BSS channel
A non-collocated AP whose primary channel is not a PSC channel
may transmit a duplicated beacon on the corresponding PSC channel
in which it would indicate its true primary channel.
Use this inforamtion contained in the HE operation IE to determine
the primary channel of the AP.
In case of invalid infomration ignore it and use the channel
the frame was received on.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202143322.71eb2176e54e.I130f678e4aa390973ab39d838bbfe7b2d54bff8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:38:32 +01:00
Lorenzo Bianconi
a95bfb876f cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard
ETSI standard defines "Offchannel CAC" as:
"Off-Channel CAC is performed by a number of non-continuous checks
spread over a period in time. This period, which is required to
determine the presence of radar signals, is defined as the Off-Channel
CAC Time..
Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time
4 hours..".
mac80211 implementation refers to a dedicated hw chain used for continuous
radar monitoring. Rename offchannel_* references to background_* in
order to avoid confusion with ETSI standard.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:37:36 +01:00
Ilan Peer
a083ee8a4e cfg80211: Add support for notifying association comeback
Thought the underline driver MLME can handle association temporal
rejection with comeback, it is still useful to notify this to
user space, as user space might want to handle the temporal
rejection differently. For example, in case the comeback time
is too long, user space can deauthenticate immediately and try
to associate with a different AP.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2467809e8cb3.I45574185b582666bc78eef0c29a4c36b478e5382@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:37:03 +01:00
Johannes Berg
3bb1ccc4ed cfg80211: simplify cfg80211_chandef_valid()
There are a lot of duplicate checks in this function to
check the delta between the control channel and CF1.
With the addition of 320 MHz, this will become even more.
Simplify the code so that the common checks are done
only once for multiple bandwidths.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.2d0240b07f11.I759e8e990f5386ba2b56ffb2488a8d4e16e22c1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-20 10:36:24 +01:00
Ilan Peer
e08ebd6d7b cfg80211: Acquire wiphy mutex on regulatory work
The function cfg80211_reg_can_beacon_relax() expects wiphy
mutex to be held when it is being called. However, when
reg_leave_invalid_chans() is called the mutex is not held.
Fix it by acquiring the lock before calling the function.

Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14 11:20:11 +01:00
Finn Behrens
37d3311424 nl80211: remove reload flag from regulatory_request
This removes the previously unused reload flag, which was introduced in
1eda919126.
The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed
unconditionally.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 1eda919126 ("nl80211: reset regdom when reloading regdb")
Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/
Signed-off-by: Finn Behrens <me@kloenk.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14 11:18:46 +01:00
Finn Behrens
1eda919126 nl80211: reset regdom when reloading regdb
Reload the regdom when the regulatory db is reloaded.
Otherwise, the user had to change the regulatoy domain
to a different one and then reset it to the correct
one to have a new regulatory db take effect after a
reload.

Signed-off-by: Finn Behrens <fin@nyantec.com>
Link: https://lore.kernel.org/r/YaIIZfxHgqc/UTA7@gimli.kloenk.dev
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-29 09:31:56 +01:00
Johannes Berg
fb8b53acf6 cfg80211: use ieee80211_bss_get_elem() instead of _get_ie()
Use the structured helper for finding an element instead of
the unstructured ieee80211_bss_get_ie().

Link: https://lore.kernel.org/r/20210930131130.e94709f341c3.I4ddb7fcb40efca27987deda7f9a144a5702ebfae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-28 21:53:04 +01:00
Lorenzo Bianconi
8415816493 cfg80211: allow continuous radar monitoring on offchannel chain
Allow continuous radar detection on the offchannel chain in order
to switch to the monitored channel whenever the underlying driver
reports a radar pattern on the main channel.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/d46217310a49b14ff0e9c002f0a6e0547d70fd2c.1637071350.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26 11:50:27 +01:00
Lorenzo Bianconi
c47240cb46 cfg80211: schedule offchan_cac_abort_wk in cfg80211_radar_event
If necessary schedule offchan_cac_abort_wk work in cfg80211_radar_event
routine adding offchan parameter to cfg80211_radar_event signature.
Rename cfg80211_radar_event in __cfg80211_radar_event and introduce
the two following inline helpers:
- cfg80211_radar_event
- cfg80211_offchan_radar_event
Doing so the drv will not need to run cfg80211_offchan_cac_abort() after
radar detection on the offchannel chain.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/3ff583e021e3343a3ced54a7b09b5e184d1880dc.1637062727.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26 11:49:54 +01:00
liuguoqiang
3536672bbd cfg80211: delete redundant free code
When kzalloc failed and rdev->sacn_req or rdev->scan_msg is null, pass a
null pointer to kfree is redundant, delete it and return directly.

Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com>
Link: https://lore.kernel.org/r/20211115092139.24407-1-liuguoqiang@uniontech.com
[remove now unused creq = NULL assigment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26 11:49:17 +01:00
Lorenzo Bianconi
91e89c7732 cfg80211: fix possible NULL pointer dereference in cfg80211_stop_offchan_radar_detection
Fix the following NULL pointer dereference in
cfg80211_stop_offchan_radar_detection routine that occurs when hostapd
is stopped during the CAC on offchannel chain:

Sat Jan  1 0[  779.567851]   ESR = 0x96000005
0:12:50 2000 dae[  779.572346]   EC = 0x25: DABT (current EL), IL = 32 bits
mon.debug hostap[  779.578984]   SET = 0, FnV = 0
d: hostapd_inter[  779.583445]   EA = 0, S1PTW = 0
face_deinit_free[  779.587936] Data abort info:
: num_bss=1 conf[  779.592224]   ISV = 0, ISS = 0x00000005
->num_bss=1
Sat[  779.597403]   CM = 0, WnR = 0
 Jan  1 00:12:50[  779.601749] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000418b2000
 2000 daemon.deb[  779.609601] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
ug hostapd: host[  779.619657] Internal error: Oops: 96000005 [#1] SMP
[  779.770810] CPU: 0 PID: 2202 Comm: hostapd Not tainted 5.10.75 #0
[  779.776892] Hardware name: MediaTek MT7622 RFB1 board (DT)
[  779.782370] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[  779.788384] pc : cfg80211_chandef_valid+0x10/0x490 [cfg80211]
[  779.794128] lr : cfg80211_check_station_change+0x3190/0x3950 [cfg80211]
[  779.800731] sp : ffffffc01204b7e0
[  779.804036] x29: ffffffc01204b7e0 x28: ffffff80039bdc00
[  779.809340] x27: 0000000000000000 x26: ffffffc008cb3050
[  779.814644] x25: 0000000000000000 x24: 0000000000000002
[  779.819948] x23: ffffff8002630000 x22: ffffff8003e748d0
[  779.825252] x21: 0000000000000cc0 x20: ffffff8003da4a00
[  779.830556] x19: 0000000000000000 x18: ffffff8001bf7ce0
[  779.835860] x17: 00000000ffffffff x16: 0000000000000000
[  779.841164] x15: 0000000040d59200 x14: 00000000000019c0
[  779.846467] x13: 00000000000001c8 x12: 000636b9e9dab1c6
[  779.851771] x11: 0000000000000141 x10: 0000000000000820
[  779.857076] x9 : 0000000000000000 x8 : ffffff8003d7d038
[  779.862380] x7 : 0000000000000000 x6 : ffffff8003d7d038
[  779.867683] x5 : 0000000000000e90 x4 : 0000000000000038
[  779.872987] x3 : 0000000000000002 x2 : 0000000000000004
[  779.878291] x1 : 0000000000000000 x0 : 0000000000000000
[  779.883594] Call trace:
[  779.886039]  cfg80211_chandef_valid+0x10/0x490 [cfg80211]
[  779.891434]  cfg80211_check_station_change+0x3190/0x3950 [cfg80211]
[  779.897697]  nl80211_radar_notify+0x138/0x19c [cfg80211]
[  779.903005]  cfg80211_stop_offchan_radar_detection+0x7c/0x8c [cfg80211]
[  779.909616]  __cfg80211_leave+0x2c/0x190 [cfg80211]
[  779.914490]  cfg80211_register_netdevice+0x1c0/0x6d0 [cfg80211]
[  779.920404]  raw_notifier_call_chain+0x50/0x70
[  779.924841]  call_netdevice_notifiers_info+0x54/0xa0
[  779.929796]  __dev_close_many+0x40/0x100
[  779.933712]  __dev_change_flags+0x98/0x190
[  779.937800]  dev_change_flags+0x20/0x60
[  779.941628]  devinet_ioctl+0x534/0x6d0
[  779.945370]  inet_ioctl+0x1bc/0x230
[  779.948849]  sock_do_ioctl+0x44/0x200
[  779.952502]  sock_ioctl+0x268/0x4c0
[  779.955985]  __arm64_sys_ioctl+0xac/0xd0
[  779.959900]  el0_svc_common.constprop.0+0x60/0x110
[  779.964682]  do_el0_svc+0x1c/0x24
[  779.967990]  el0_svc+0x10/0x1c
[  779.971036]  el0_sync_handler+0x9c/0x120
[  779.974950]  el0_sync+0x148/0x180
[  779.978259] Code: a9bc7bfd 910003fd a90153f3 aa0003f3 (f9400000)
[  779.984344] ---[ end trace 0e67b4f5d6cdeec7 ]---
[  779.996400] Kernel panic - not syncing: Oops: Fatal exception
[  780.002139] SMP: stopping secondary CPUs
[  780.006057] Kernel Offset: disabled
[  780.009537] CPU features: 0x0000002,04002004
[  780.013796] Memory Limit: none

Fixes: b8f5facf286b ("cfg80211: implement APIs for dedicated radar detection HW")
Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c2e34c065bf8839c5ffa45498ae154021a72a520.1635958796.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26 11:46:12 +01:00
Lorenzo Bianconi
1507b15319 cfg80211: move offchan_cac_event to a dedicated work
In order to make cfg80211_offchan_cac_abort() (renamed from
cfg80211_offchan_cac_event) callable in other contexts and
without so much locking restrictions, make it trigger a new
work instead of operating directly.

Do some other renames while at it to clarify.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/6145c3d0f30400a568023f67981981d24c7c6133.1635325205.git.lorenzo@kernel.org
[rewrite commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19 09:38:50 +01:00
Lorenzo Bianconi
bc2dfc0283 cfg80211: implement APIs for dedicated radar detection HW
If a dedicated (off-channel) radar detection hardware (chain)
is available in the hardware/driver, allow this to be used by
calling the NL80211_CMD_RADAR_DETECT command with a new flag
attribute requesting off-channel radar detection is used.

Offchannel CAC (channel availability check) avoids the CAC
downtime when switching to a radar channel or when turning on
the AP.

Drivers advertise support for this using the new feature flag
NL80211_EXT_FEATURE_RADAR_OFFCHAN.

Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/7468e291ef5d05d692c1738d25b8f778d8ea5c3f.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/1e60e60fef00e14401adae81c3d49f3e5f307537.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/85fa50f57fc3adb2934c8d9ca0be30394de6b7e8.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/4b6c08671ad59aae0ac46fc94c02f31b1610eb72.1634979655.git.lorenzo@kernel.org
Link: https://lore.kernel.org/r/241849ccaf2c228873c6f8495bf87b19159ba458.1634979655.git.lorenzo@kernel.org
[remove offchan_mutex, fix cfg80211_stop_offchan_radar_detection(),
 remove gfp_t argument, fix documentation, fix tracing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-19 09:38:49 +01:00
Johannes Berg
ce6b697499 nl80211: fix radio statistics in survey dump
Even if userspace specifies the NL80211_ATTR_SURVEY_RADIO_STATS
attribute, we cannot get the statistics because we're not really
parsing the incoming attributes properly any more.

Fix this by passing the attrbuf to nl80211_prepare_wdev_dump()
and filling it there, if given, and using a local version only
if no output is desired.

Since I'm touching it anyway, make nl80211_prepare_wdev_dump()
static.

Fixes: 50508d941c ("cfg80211: use parallel_ops for genl")
Reported-by: Jan Fuchs <jf@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20211029092539.2851b4799386.If9736d4575ee79420cbec1bd930181e1d53c7317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15 10:51:51 +01:00
Nguyen Dinh Phi
563fbefed4 cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com
Cc: stable@vger.kernel.org
Fixes: ac800140c2 ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15 10:51:13 +01:00
Jakub Kicinski
7df621a3ee Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
include/net/sock.h
  7b50ecfcc6 ("net: Rename ->stream_memory_read to ->sock_is_readable")
  4c1e34c0db ("vsock: Enable y2038 safe timeval for timeout")

drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
  0daa55d033 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table")
  e77bcdd1f6 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.")

Adjacent code addition in both cases, keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28 10:43:58 -07:00
Janusz Dziedzic
689a0a9f50 cfg80211: correct bridge/4addr mode check
Without the patch we fail:

$ sudo brctl addbr br0
$ sudo brctl addif br0 wlp1s0
$ sudo iw wlp1s0 set 4addr on
command failed: Device or resource busy (-16)

Last command failed but iface was already in 4addr mode.

Fixes: ad4bb6f888 ("cfg80211: disallow bridging managed/adhoc interfaces")
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com
[add fixes tag, fix indentation, edit commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25 15:23:20 +02:00
Johannes Berg
09b1d5dc6c cfg80211: fix management registrations locking
The management registrations locking was broken, the list was
locked for each wdev, but cfg80211_mgmt_registrations_update()
iterated it without holding all the correct spinlocks, causing
list corruption.

Rather than trying to fix it with fine-grained locking, just
move the lock to the wiphy/rdev (still need the list on each
wdev), we already need to hold the wdev lock to change it, so
there's no contention on the lock in any case. This trivially
fixes the bug since we hold one wdev's lock already, and now
will hold the lock that protects all lists.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 6cd536fe62 ("cfg80211: change internal management frame registration API")
Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-25 15:20:22 +02:00
Srinivasan Raju
63fa042666 nl80211: Add LC placeholder band definition to nl80211_band
Define LC band which is a draft under IEEE 802.11bb.
Current NL80211_BAND_LC is a placeholder band and
will be more defined IEEE 802.11bb progresses.

Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com>
Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:25:17 +02:00
Wen Gong
97981d89a1 cfg80211: separate get channel number from ies
Get channel number from ies is a common logic, so separate it to a new
function, which could also be used by lower driver.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210930081533.4898-1-wgong@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:25:16 +02:00
Johannes Berg
a3eca81792 cfg80211: scan: use element finding functions in easy cases
There are a few easy cases where we only check for NULL or
have just simple use of the result, this can be done with
the element finding functions instead.

Link: https://lore.kernel.org/r/20210930131130.f27c8a7ec264.Iadb03c4307e9216e080ce513e8ad4048cd020b25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:01:20 +02:00
Johannes Berg
153e2a11c9 nl80211: use element finding functions
The element finding functions are safer, so use them
instead of the "find_ie" functions.

Link: https://lore.kernel.org/r/20210930131130.b838f139cc8e.I2b641262d3fc6e0d498719bf343fdc1c0833b845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21 17:01:18 +02:00