rb_alloc_aux() should not be called with nr_pages <= 0. Make it more robust
and readable by returning an error immediately in that case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-8-adrian.hunter@intel.com
The default aux_watermark is half the AUX area buffer size. In general,
on a 64-bit architecture, the AUX area buffer size could be a bigger than
fits in a 32-bit type, but the calculation does not allow for that
possibility.
However the aux_watermark value is recorded in a u32, so should not be
more than U32_MAX either.
Fix by doing the calculation in a correctly sized type, and limiting the
result to U32_MAX.
Fixes: d68e6799a5 ("perf: Cap allocation order at aux_watermark")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-7-adrian.hunter@intel.com
nr_pages is unsigned long but gets passed to rb_alloc_aux() as an int,
and is stored as an int.
Only power-of-2 values are accepted, so if nr_pages is a 64_bit value, it
will be passed to rb_alloc_aux() as zero.
That is not ideal because:
1. the value is incorrect
2. rb_alloc_aux() is at risk of misbehaving, although it manages to
return -ENOMEM in that case, it is a result of passing zero to get_order()
even though the get_order() result is documented to be undefined in that
case.
Fix by simply validating the maximum supported value in the first place.
Use -ENOMEM error code for consistency with the current error code that
is returned in that case.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-6-adrian.hunter@intel.com
perf_buffer->aux_nr_pages uses a 32-bit type, so a cast is needed to
calculate a 64-bit size.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240624201101.60186-5-adrian.hunter@intel.com
When a task's weight is being changed, set_load_weight() is called with
@update_load set. As weight changes aren't trivial for the fair class,
set_load_weight() calls fair.c::reweight_task() for fair class tasks.
However, set_load_weight() first tests task_has_idle_policy() on entry and
skips calling reweight_task() for SCHED_IDLE tasks. This is buggy as
SCHED_IDLE tasks are just fair tasks with a very low weight and they would
incorrectly skip load, vlag and position updates.
Fix it by updating reweight_task() to take struct load_weight as idle weight
can't be expressed with prio and making set_load_weight() call
reweight_task() for SCHED_IDLE tasks too when @update_load is set.
Fixes: 9059393e4e ("sched/fair: Use reweight_entity() for set_user_nice()")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # v4.15+
Link: http://lkml.kernel.org/r/20240624102331.GI31592@noisy.programming.kicks-ass.net
The current code loops over the psi_states only to call a helper which
then resolves back to the action needed for each state using a switch
statement. That is effectively creating a double indirection of a kind
which, given how all the states need to be explicitly listed and handled
anyway, we can simply remove. Both the for loop and the switch statement
that is.
The benefit is both in the code size and CPU time spent in this function.
YMMV but on my Steam Deck, while in a game, the patch makes the CPU usage
go from ~2.4% down to ~1.2%. Text size at the same time went from 0x323 to
0x2c1.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20240625135000.38652-1-tursulin@igalia.com
Let's add match_devname_and_update_preferred_console() for driver
subsystems to call during init when the console is ready, and it's
character device name is known. For now, we use it only for the serial
layer to allow console=DEVNAME:0.0 style hardware based addressing for
consoles.
The earlier attempt on doing this caused a regression with the kernel
command line console order as it added calling __add_preferred_console()
again later on during init. A better approach was suggested by Petr where
we add the deferred console to the console_cmdline[] and update it later
on when the console is ready.
Suggested-by: Petr Mladek <pmladek@suse.com>
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240703100615.118762-2-tony.lindgren@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently users of the interrupt simulator don't have any way of being
notified about interrupts from the simulated domain being requested or
released. This causes a problem for one of the users - the GPIO
simulator - which is unable to lock the pins as interrupts.
Define a structure containing callbacks to be executed on various
irq_sim-related events (for now: irq request and release) and provide an
extended function for creating simulated interrupt domains that takes it
and a pointer to custom user data (to be passed to said callbacks) as
arguments.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240624093934.17089-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Patch series "kmsan: Enable on s390", v7.
Architectures use assembly code to initialize ftrace_regs and call
ftrace_ops_list_func(). Therefore, from the KMSAN's point of view,
ftrace_regs is poisoned on ftrace_ops_list_func entry(). This causes
KMSAN warnings when running the ftrace testsuite.
Fix by trusting the architecture-specific assembly code and always
unpoisoning ftrace_regs in ftrace_ops_list_func.
The issue was not encountered on x86_64 so far only by accident:
assembly-allocated ftrace_regs was overlapping a stale partially
unpoisoned stack frame. Poisoning stack frames before returns [1] makes
the issue appear on x86_64 as well.
[1] https://github.com/iii-i/llvm-project/commits/msan-poison-allocas-before-returning-2024-06-12/
Link: https://lkml.kernel.org/r/20240621113706.315500-1-iii@linux.ibm.com
Link: https://lkml.kernel.org/r/20240621113706.315500-2-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()", v2.
This patchset is preparatory work for mTHP swapin.
folio_add_new_anon_rmap() assumes that new anon rmaps are always
exclusive. However, this assumption doesn’t hold true for cases like
do_swap_page(), where a new anon might be added to the swapcache and is
not necessarily exclusive.
The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to
handle both exclusive and non-exclusive new anon folios. The
do_swap_page() function is updated to use this extended API with rmap
flags. Consequently, all new anon folios now consistently use
folio_add_new_anon_rmap(). The special case for !folio_test_anon() in
__folio_add_anon_rmap() can be safely removed.
In conclusion, new anon folios always use folio_add_new_anon_rmap(),
regardless of exclusivity. Old anon folios continue to use
__folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and
folio_add_anon_rmap_ptes().
This patch (of 3):
In the case of a swap-in, a new anonymous folio is not necessarily
exclusive. This patch updates the rmap flags to allow a new anonymous
folio to be treated as either exclusive or non-exclusive. To maintain the
existing behavior, we always use EXCLUSIVE as the default setting.
[akpm@linux-foundation.org: cleanup and constifications per David and akpm]
[v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()]
Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com
[v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap]
Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Link: https://lkml.kernel.org/r/20240620122123.3877432-1-alexjlzheng@tencent.com
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To streamline maintenance efforts, we propose removing the implementation
of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set
to 1. swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.
A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c. Implementing this change facilitates the adoption of
batch processing for hibernation.
Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the WARN_ON_ONCE() triggers, the printk() of the additional
information related to the warning will not happen in print level
"warn". When reading dmesg with a restriction to level "warn", the
information published by the printk_once() will not show up there.
Transform WARN_ON_ONCE() and printk_once() into a WARN_ONCE().
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240610103552.25252-1-anna-maria@linutronix.de
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Link: https://lkml.kernel.org/r/20240620122123.3877432-1-alexjlzheng@tencent.com
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The writing of css->cgroup associated with the cgroup root in
rebind_subsystems() is currently protected only by cgroup_mutex.
However, the reading of css->cgroup in both proc_cpuset_show() and
proc_cgroup_show() is protected just by css_set_lock. That makes the
readers susceptible to racing problems like data tearing or caching.
It is also a problem that can be reported by KCSAN.
This can be fixed by using READ_ONCE() and WRITE_ONCE() to access
css->cgroup. Alternatively, the writing of css->cgroup can be moved
under css_set_lock as well which is done by this patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce misc.peak to record the historical maximum usage of the
resource, as in some scenarios the value of misc.max could be
adjusted based on the peak usage of the resource.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use a simple if-statement to replace the cumbersome goto-statement in
workqueue_set_unbound_cpumask().
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make workqueue_unbound_exclude_cpumask() and workqueue_set_unbound_cpumask()
only update wq_isolated_cpumask and wq_requested_unbound_cpumask when
workqueue_apply_unbound_cpumask() returns successfully.
Fixes: fe28f631fa94("workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask")
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use the .map_allock_check callback to perform allocation checks before
allocating memory for the devmap.
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240615101158.57889-1-dev@der-flo.net
Zero-extending results of atomic probe operations fails with:
verifier bug. zext_dst is set, but no reg is defined
The problem is that insn_def_regno() handles BPF_ATOMICs, but not
BPF_PROBE_ATOMICs. Fix by adding the missing condition.
Fixes: d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-2-iii@linux.ibm.com
Let's use sysfs_emit() instead of snprintf().
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240625151123.2750-4-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
There are situations when it might make sense to combine livepatches
with and without the atomic replace on the same system. For example,
the livepatch without the atomic replace might provide a hotfix
or extra tuning.
Managing livepatches on such systems might be challenging. And the
information which of the installed livepatches do not use the atomic
replace would be useful.
Add new sysfs interface 'replace'. It works as follows:
$ cat /sys/kernel/livepatch/livepatch-non_replace/replace
0
$ cat /sys/kernel/livepatch/livepatch-replace/replace
1
[ commit log improved by Petr ]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240625151123.2750-2-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The bpf_net_ctx_get_.*_flush_list() are used at the top of the function.
This means the variable is always assigned even if unused. By moving the
function to where it is used, it is possible to delay the initialisation
until it is unavoidable.
Not sure how much this gains in reality but by looking at bq_enqueue()
(in devmap.c) gcc pushes one register less to the stack. \o/.
Move flush list retrieval to where it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no clone() invocation within a bpf_net_ctx_…() block. Therefore
the task_struct::bpf_net_context has always to be NULL and an explicit
initialisation is not required.
Remove the NULL assignment in the clone() path.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change the default threshold for osnoise to 1us, so that any noise
equal or above this value is recorded. Let the user set a higher
threshold if necessary.
Link: https://lore.kernel.org/linux-trace-kernel/Zmb-QhiiiI6jM9To@uudg.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Suggested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Clark Williams <williams@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For trampoline using bpf_prog_pack, we need to generate a rw_image
buffer with size of (image_end - image). For regular trampoline, we use
the precise image size generated by arch_bpf_trampoline_size to allocate
rw_image. But for struct_ops trampoline, we allocate rw_image directly
using close to PAGE_SIZE size. We do not need to allocate for that much,
as the patch size is usually much smaller than PAGE_SIZE. Let's use
precise image size for it too.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com> #riscv
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240622030437.3973492-2-pulehui@huaweicloud.com
It was reported that in moving to 6.1, a larger then 10%
regression was seen in the performance of
clock_gettime(CLOCK_THREAD_CPUTIME_ID,...).
Using a simple reproducer, I found:
5.10:
100000000 calls in 24345994193 ns => 243.460 ns per call
100000000 calls in 24288172050 ns => 242.882 ns per call
100000000 calls in 24289135225 ns => 242.891 ns per call
6.1:
100000000 calls in 28248646742 ns => 282.486 ns per call
100000000 calls in 28227055067 ns => 282.271 ns per call
100000000 calls in 28177471287 ns => 281.775 ns per call
The cause of this was finally narrowed down to the addition of
psi_account_irqtime() in update_rq_clock_task(), in commit
52b1364ba0 ("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ
pressure").
In my initial attempt to resolve this, I leaned towards moving
all accounting work out of the clock_gettime() call path, but it
wasn't very pretty, so it will have to wait for a later deeper
rework. Instead, Peter shared this approach:
Rework psi_account_irqtime() to use its own psi_irq_time base
for accounting, and move it out of the hotpath, calling it
instead from sched_tick() and __schedule().
In testing this, we found the importance of ensuring
psi_account_irqtime() is run under the rq_lock, which Johannes
Weiner helpfully explained, so also add some lockdep annotations
to make that requirement clear.
With this change the performance is back in-line with 5.10:
6.1+fix:
100000000 calls in 24297324597 ns => 242.973 ns per call
100000000 calls in 24318869234 ns => 243.189 ns per call
100000000 calls in 24291564588 ns => 242.916 ns per call
Reported-by: Jimmy Shiu <jimmyshiu@google.com>
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20240618215909.4099720-1-jstultz@google.com
During the execution of the following stress test with linux-rt:
stress-ng --cyclic 30 --timeout 30 --minimize --quiet
kmemleak frequently reported a memory leak concerning the task_struct:
unreferenced object 0xffff8881305b8000 (size 16136):
comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s)
object hex dump (first 32 bytes):
02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debug hex dump (first 16 bytes):
53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S...............
backtrace:
[<00000000046b6790>] dup_task_struct+0x30/0x540
[<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0
[<00000000ced59777>] kernel_clone+0xb0/0x770
[<00000000a50befdc>] __do_sys_clone+0xb6/0xf0
[<000000001dbf2008>] do_syscall_64+0x5d/0xf0
[<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
The issue occurs in start_dl_timer(), which increments the task_struct
reference count and sets a timer. The timer callback, dl_task_timer,
is supposed to decrement the reference count upon expiration. However,
if enqueue_task_dl() is called before the timer expires and cancels it,
the reference count is not decremented, leading to the leak.
This patch fixes the reference leak by ensuring the task_struct
reference count is properly decremented when the timer is canceled.
Fixes: feff2e65ef ("sched/deadline: Unthrottle PI boosted threads while enqueuing")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240620125618.11419-1-wander@redhat.com
This reverts commit b0defa7ae0.
b0defa7ae0 changed the load balancing logic to ignore env.max_loop if
all tasks examined to that point were pinned. The goal of the patch was
to make it more likely to be able to detach a task buried in a long list
of pinned tasks. However, this has the unfortunate side effect of
creating an O(n) iteration in detach_tasks(), as we now must fully
iterate every task on a cpu if all or most are pinned. Since this load
balance code is done with rq lock held, and often in softirq context, it
is very easy to trigger hard lockups. We observed such hard lockups with
a user who affined O(10k) threads to a single cpu.
When I discussed this with Vincent he initially suggested that we keep
the limit on the number of tasks to detach, but increase the number of
tasks we can search. However, after some back and forth on the mailing
list, he recommended we instead revert the original patch, as it seems
likely no one was actually getting hit by the original issue.
Fixes: b0defa7ae0 ("sched/fair: Make sure to try to detach at least one movable task")
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240620214450.316280-1-joshdon@google.com
Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet. Everyone agreed to just revert
them for now and will work on making them better for a future
release instead of trying to quick fix the existing changes this
late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFmvg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymziACgvoDTxuDHHfPOd6h/1qrHqYpFK1YAn2IDMJGj
Ng4/I/gwnkJeeHQC5JSn
=g9o4
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / console fixes from Greg KH:
"Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet.
Everyone agreed to just revert them for now and will work on making
them better for a future release instead of trying to quick fix the
existing changes this late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "printk: Save console options for add_preferred_console_match()"
Revert "printk: Don't try to parse DEVNAME:0.0 console options"
Revert "printk: Flag register_console() if console is set on command line"
Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
Revert "serial: core: Handle serial console options"
Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
Revert "serial: core: Fix ifdef for serial base console functions"
serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
serial: core: introduce uart_port_tx_limited_flags()
Revert "serial: core: only stop transmit when HW fifo is empty"
serial: imx: set receiver level before starting uart
tty: mcf: MCF54418 has 10 UARTS
serial: 8250_omap: Implementation of Errata i2310
tty: serial: 8250: Fix port count mismatch with the device
- Make sure CPU hotplug dynamic prepare states are actually executed
-----BEGIN PGP SIGNATURE-----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=qGvT
-----END PGP SIGNATURE-----
Merge tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
in and broke them
- Make sure CPU hotplug dynamic prepare states are actually executed
* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()
-----BEGIN PGP SIGNATURE-----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=et0y
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Warn when an hrtimer doesn't get a callback supplied
* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Prevent queuing of hrtimer without a function callback
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/resource_kunit.o
Link: https://lkml.kernel.org/r/20240529-md-kernel-resource_kunit-v1-1-bb719784b714@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 'offline' file in sysfs shows all offline CPUs, including those
that aren't present. User-space is expected to remove not-present CPUs
from this list to learn which CPUs could be brought online.
CPUs can be present but not-enabled. These CPUs can't be brought online
until the firmware policy changes, which comes with an ACPI notification
that will register the CPUs.
With only the offline and present files, user-space is unable to
determine which CPUs it can try to bring online. Add a new CPU mask
that shows this based on all the registered CPUs.
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-20-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
An UAF can happen when /proc/cpuset is read as reported in [1].
This can be reproduced by the following methods:
1.add an mdelay(1000) before acquiring the cgroup_lock In the
cgroup_path_ns function.
2.$cat /proc/<pid>/cpuset repeatly.
3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/
$umount /sys/fs/cgroup/cpuset/ repeatly.
The race that cause this bug can be shown as below:
(umount) | (cat /proc/<pid>/cpuset)
css_release | proc_cpuset_show
css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id);
css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...);
cgroup_destroy_root | mutex_lock(&cgroup_mutex);
rebind_subsystems |
cgroup_free_root |
| // cgrp was freed, UAF
| cgroup_path_ns_locked(cgrp,..);
When the cpuset is initialized, the root node top_cpuset.css.cgrp
will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will
allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated
&cgroup_root.cgrp. When the umount operation is executed,
top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp.
The problem is that when rebinding to cgrp_dfl_root, there are cases
where the cgroup_root allocated by setting up the root for cgroup v1
is cached. This could lead to a Use-After-Free (UAF) if it is
subsequently freed. The descendant cgroups of cgroup v1 can only be
freed after the css is released. However, the css of the root will never
be released, yet the cgroup_root should be freed when it is unmounted.
This means that obtaining a reference to the css of the root does
not guarantee that css.cgrp->root will not be freed.
Fix this problem by using rcu_read_lock in proc_cpuset_show().
As cgroup_root is kfree_rcu after commit d23b5c5777
("cgroup: Make operations on the cgroup root_list RCU safe"),
css->cgroup won't be freed during the critical section.
To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to
replace task_get_css with task_css.
[1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Previously, seccomp filters were released in release_task(), which
required the process to exit and its zombie to be collected. However,
exited threads/processes can't trigger any seccomp events, making it
more logical to release filters upon task exits.
This adjustment simplifies scenarios where a parent is tracing its child
process. The parent process can now handle all events from a seccomp
listening descriptor and then call wait to collect a child zombie.
seccomp_filter_release takes the siglock to avoid races with
seccomp_sync_threads. There was an idea to bypass taking the lock by
checking PF_EXITING, but it can be set without holding siglock if
threads have SIGNAL_GROUP_EXIT. This means it can happen concurently
with seccomp_filter_release.
This change also fixes another minor problem. Suppose that a group
leader installs the new filter without SECCOMP_FILTER_FLAG_TSYNC, exits,
and becomes a zombie. Without this change, SECCOMP_FILTER_FLAG_TSYNC
from any other thread can never succeed, seccomp_can_sync_threads() will
check a zombie leader and is_ancestor() will fail.
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20240628021014.231976-3-avagin@google.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <kees@kernel.org>
SECCOMP_IOCTL_NOTIF_RECV promptly returns when a seccomp filter becomes
unused, as a filter without users can't trigger any events.
Previously, event listeners had to rely on epoll to detect when all
processes had exited.
The change is based on the 'commit 99cdb8b9a5 ("seccomp: notify about
unused filter")' which implemented (E)POLLHUP notifications.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrei Vagin <avagin@google.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240628021014.231976-2-avagin@google.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <kees@kernel.org>
A full memory barrier is necessary at the end of the expedited grace
period to order:
1) The grace period completion (pictured by the GP sequence
number) with all preceding accesses. This pairs with rcu_seq_end()
performed by the concurrent kworker.
2) The grace period completion and subsequent post-GP update side
accesses. Pairs again against rcu_seq_end().
This full barrier is already provided by the final sync_exp_work_done()
test, making the subsequent explicit one redundant. Remove it and
improve comments.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
RCU stall printout fetches the EQS state of a CPU with a preceding full
memory barrier. However there is nothing to order this read against at
this debugging stage. It is inherently racy when performed remotely.
Do a plain read instead.
This was the last user of rcu_dynticks_snap().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
When the boot CPU initializes the per-CPU data on behalf of all possible
CPUs, a sanity check is performed on each of them to make sure none is
initialized in an extended quiescent state.
This check involves a full memory barrier which is useless at this early
boot stage.
Do a plain access instead.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state. Also the GP kthread must
observe all accesses performed by the target prior it entering in
EQS.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state. Also the GP kthread later
observing that EQS must also observe all accesses performed by the
target prior it entering in EQS.
This ordering is explicitly performed both on the first EQS snapshot
and on the second one as well through the combination of a preceding
full barrier followed by an acquire read. However the second snapshot's
full memory barrier is redundant and not needed to enforce the above
guarantees:
GP kthread Remote target
---- -----
// Access prior GP
WRITE_ONCE(A, 1)
// first snapshot
smp_mb()
x = smp_load_acquire(EQS)
// Access prior GP
WRITE_ONCE(B, 1)
// EQS enter
// implied full barrier by atomic_add_return()
atomic_add_return(RCU_DYNTICKS_IDX, EQS)
// implied full barrier by atomic_add_return()
READ_ONCE(A)
// second snapshot
y = smp_load_acquire(EQS)
z = READ_ONCE(B)
If the GP kthread above fails to observe the remote target in EQS
(x not in EQS), the remote target will observe A == 1 after further
entering in EQS. Then the second snapshot taken by the GP kthread only
need to be an acquire read in order to observe z == 1.
Therefore remove the needless full memory barrier on second snapshot.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these
bugs have gone unnoticed for many years, but I think we probably
want to backport them all to stable kernels, so it makes sense
to have the fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I had
mistakenly thought that this fix was already merged through the module
tree, but as Geert pointed out it was still missing.
-----BEGIN PGP SIGNATURE-----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=ieQy
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are some bugfixes for system call ABI issues I found while
working on a cleanup series. None of these are urgent since these bugs
have gone unnoticed for many years, but I think we probably want to
backport them all to stable kernels, so it makes sense to have the
fixes included as early as possible.
One more fix addresses a compile-time warning in kallsyms that was
uncovered by a patch I did to enable additional warnings in 6.10. I
had mistakenly thought that this fix was already merged through the
module tree, but as Geert pointed out it was still missing"
* tag 'asm-generic-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
kallsyms: rework symbol lookup return codes
linux/syscalls.h: add missing __user annotations
syscalls: mmap(): use unsigned offset type consistently
s390: remove native mmap2() syscall
hexagon: fix fadvise64_64 calling conventions
csky, hexagon: fix broken sys_sync_file_range
sh: rework sync_file_range ABI
powerpc: restore some missing spu syscalls
parisc: use generic sys_fanotify_mark implementation
parisc: use correct compat recv/recvfrom syscalls
sparc: fix compat recv/recvfrom syscalls
sparc: fix old compat_sys_select()
syscalls: fix compat_sys_io_pgetevents_time64 usage
ftruncate: pass a signed offset
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
- batman-adv: fix RCU race at module unload time
Current release - new code bugs:
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not confirmed
- eth: bonding: fix incorrect software timestamping report
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset.
- fix the corner case with may_goto and jump to the 1st insn.
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=BYgZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: bonding: fix incorrect software timestamping report
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two patches to fix kworker name formatting.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZnyHUw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGV8AAQCi2flF10nHfE+nPsji8Z2FWtDKIzemsKgmxSnW
VvThlAD+MeK29fbz0uZzFa65TqIeckf7DGoGQpKnMzC7+FeJWAc=
=6POk
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two patches to fix kworker name formatting"
* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Increase worker desc's length to 32
workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to
a global function as an argument. The adverse effects of this is that
BPF helpers can continue to make use of this modified
CONST_PTR_TO_DYNPTR from within the context of the global function,
which can unintentionally result in out-of-bounds memory accesses and
therefore compromise overall system stability i.e.
[ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140
[ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302
[ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533
[ 244.174318] Call Trace:
[ 244.175787] <TASK>
[ 244.177356] dump_stack_lvl+0x66/0xa0
[ 244.179531] print_report+0xce/0x670
[ 244.182314] ? __virt_addr_valid+0x200/0x3e0
[ 244.184908] kasan_report+0xd7/0x110
[ 244.187408] ? bpf_dynptr_data+0x137/0x140
[ 244.189714] ? bpf_dynptr_data+0x137/0x140
[ 244.192020] bpf_dynptr_data+0x137/0x140
[ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26
[ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23
[ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570
[ 244.204744] ? 0xffffffffc0009e58
[ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10
[ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b
[ 244.215922] bpf_trampoline_6442502480+0x43/0xe3
[ 244.218691] __x64_sys_prlimit64+0x9/0xf0
[ 244.220912] do_syscall_64+0xc1/0x1d0
[ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 244.226458] RIP: 0033:0x7ffa3eb8f059
[ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48
[ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e
[ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059
[ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0
[ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000
[ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80
[ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000
[ 244.268303] </TASK>
Add a check_func_arg_reg_off() to the path in which the BPF verifier
verifies the arguments of global function arguments, specifically
those which take an argument of type ARG_PTR_TO_DYNPTR |
MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any
explicit and strict type matching on the supplied register type, so
let's also enforce that a register either type PTR_TO_STACK or
CONST_PTR_TO_DYNPTR is by the caller.
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240625062857.92760-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On a ~2000 CPU powerpc system, hard lockups have been observed in the
workqueue code when stop_machine runs (in this case due to CPU hotplug).
This is due to lots of CPUs spinning in multi_cpu_stop, calling
touch_nmi_watchdog() which ends up calling wq_watchdog_touch().
wq_watchdog_touch() writes to the global variable wq_watchdog_touched,
and that can find itself in the same cacheline as other important
workqueue data, which slows down operations to the point of lockups.
In the case of the following abridged trace, worker_pool_idr was in
the hot line, causing the lockups to always appear at idr_find.
watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find
Call Trace:
get_work_pool
__queue_work
call_timer_fn
run_timer_softirq
__do_softirq
do_softirq_own_stack
irq_exit
timer_interrupt
decrementer_common_virt
* interrupt: 900 (timer) at multi_cpu_stop
multi_cpu_stop
cpu_stopper_thread
smpboot_thread_fn
kthread
Fix this by having wq_watchdog_touch() only write to the line if the
last time a touch was recorded exceeds 1/4 of the watchdog threshold.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Warn in the case it is called with cpu == -1. This does not appear
to happen anywhere.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The hrtimer function callback must not be NULL. It has to be specified by
the call side but it is not validated by the hrtimer code. When a hrtimer
is queued without a function callback, the kernel crashes with a null
pointer dereference when trying to execute the callback in __run_hrtimer().
Introduce a validation before queuing the hrtimer in
hrtimer_start_range_ns().
[anna-maria: Rephrase commit message]
Signed-off-by: Phil Chang <phil.chang@mediatek.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Using sys_io_pgetevents() as the entry point for compat mode tasks
works almost correctly, but misses the sign extension for the min_nr
and nr arguments.
This was addressed on parisc by switching to
compat_sys_io_pgetevents_time64() in commit 6431e92fc8 ("parisc:
io_pgetevents_time64() needs compat syscall in 32-bit compat mode"),
as well as by using more sophisticated system call wrappers on x86 and
s390. However, arm64, mips, powerpc, sparc and riscv still have the
same bug.
Change all of them over to use compat_sys_io_pgetevents_time64()
like parisc already does. This was clearly the intention when the
function was originally added, but it got hooked up incorrectly in
the tables.
Cc: stable@vger.kernel.org
Fixes: 48166e6ea4 ("y2038: add 64-bit time_t syscalls to all 32-bit architectures")
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit f03e8c1060.
Let's roll back all of the serial core and printk console changes that
went into 6.10-rc1 as there still are problems with them that need to be
sorted out.
Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1
Reported-by: Petr Mladek <pmladek@suse.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 8a831c584e.
Let's roll back all of the serial core and printk console changes that
went into 6.10-rc1 as there still are problems with them that need to be
sorted out.
Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1
Reported-by: Petr Mladek <pmladek@suse.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b73c9cbe4f.
Let's roll back all of the serial core and printk console changes that
went into 6.10-rc1 as there still are problems with them that need to be
sorted out.
Link: https://lore.kernel.org/r/ZnpRozsdw6zbjqze@tlindgre-MOBL1
Reported-by: Petr Mladek <pmladek@suse.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If hung_task_panic is enabled, don't consider the value of
hung_task_warnings and display the information of the hung tasks.
In some cases, hung_task_panic might not be initially set up, after
several hung tasks occur, the hung_task_warnings count reaches zero. If
hung_task_panic is set up later, it may not display any helpful hung task
info in dmesg, only showing messages like:
Kernel panic - not syncing: hung_task: blocked tasks
CPU: 3 PID: 58 Comm: khungtaskd Not tainted 6.10.0-rc3 #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
panic+0x2f3/0x320
watchdog+0x2dd/0x510
? __pfx_watchdog+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Link: https://lkml.kernel.org/r/20240613033159.3446265-1-leonylgao@gmail.com
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Reviewed-by: Huang Cun <cunhuang@tencent.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: John Siddle <jsiddle@redhat.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following warning is reported, so remove these duplicated header
including:
./kernel/crash_reserve.c: linux/kexec.h is included more than once.
This is just a clean code, no logic changed.
Link: https://lkml.kernel.org/r/20240606091427.3512314-1-haowenchao22@gmail.com
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With nearly 20 taint flags and respective characters, it's getting a bit
difficult to remember what each taint flag character means. Add verbose
logging of the set taints in the format:
Tainted: [P]=PROPRIETARY_MODULE, [W]=WARN
in dump_stack_print_info() when there are taints.
Note that the "negative flag" G is not included.
Link: https://lkml.kernel.org/r/7321e306166cb2ca2807ab8639e665baa2462e9c.1717146197.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert print_tainted() to use struct seq_buf internally in order to be
more aware of the buffer constraints as well as make it easier to extend
in follow-up work.
Link: https://lkml.kernel.org/r/cb6006fa7c0f82a6b6885e8eea2920fcdc4fc9d0.1717146197.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After adding min_heap_sift_up(), the naming convention has been adjusted
to maintain consistency with the min_heap_sift_up(). Consequently,
min_heapify() has been renamed to min_heap_sift_down().
Link: https://lkml.kernel.org/CAP-5=fVcBAxt8Mw72=NCJPRJfjDaJcqk4rjbadgouAEAHz_q1A@mail.gmail.com
Link: https://lkml.kernel.org/r/20240524152958.919343-13-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Coly Li <colyli@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a third parameter 'args' for the 'less' and 'swp' functions in the
'struct min_heap_callbacks'. This additional parameter allows these
comparison and swap functions to handle extra arguments when necessary.
Link: https://lkml.kernel.org/r/20240524152958.919343-9-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Coly Li <colyli@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a type-safe interface for min_heap using strong type pointers
instead of void * in the data field. This change includes adding small
macro wrappers around functions, enabling the use of __minheap_cast and
__minheap_obj_size macros for type casting and obtaining element size.
This implementation removes the necessity of passing element size in
min_heap_callbacks. Additionally, introduce the MIN_HEAP_PREALLOCATED
macro for preallocating some elements.
Link: https://lkml.kernel.org/ioyfizrzq7w7mjrqcadtzsfgpuntowtjdw5pgn4qhvsdp4mqqg@nrlek5vmisbu
Link: https://lkml.kernel.org/r/20240524152958.919343-5-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Coly Li <colyli@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "treewide: Refactor heap related implementation", v6.
This patch series focuses on several adjustments related to heap
implementation. Firstly, a type-safe interface has been added to the
min_heap, along with the introduction of several new functions to enhance
its functionality. Additionally, the heap implementation for bcache and
bcachefs has been replaced with the generic min_heap implementation from
include/linux. Furthermore, several typos have been corrected.
Previous discussion with Kent Overstreet:
https://lkml.kernel.org/ioyfizrzq7w7mjrqcadtzsfgpuntowtjdw5pgn4qhvsdp4mqqg@nrlek5vmisbu
This patch (of 16):
Replace 'artifically' with 'artificially'.
Replace 'irrespecive' with 'irrespective'.
Replace 'futher' with 'further'.
Replace 'sufficent' with 'sufficient'.
Link: https://lkml.kernel.org/r/20240524152958.919343-1-visitorckw@gmail.com
Link: https://lkml.kernel.org/r/20240524152958.919343-2-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Coly Li <colyli@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use this_cpu_try_cmpxchg() instead of this_cpu_cmpxchg (*ptr, old, new) ==
old in try_release_thread_stack_to_cache. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg).
No functional change intended.
[ubizjak@gmail.com: simplify the for loop a bit]
Link: https://lkml.kernel.org/r/20240523214442.21102-1-ubizjak@gmail.com
Link: https://lkml.kernel.org/r/20240523073530.8128-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZnlmXgAKCRDbK58LschI
g2ovAP9iynwwFEjMSxHjQVXSq1J1PMqF4966vmy30RCKJMMN/QD/SRsRRKcfsPis
BzKOdsOVbWlDl2CUqvBrPZGT6laKoQc=
=6/0V
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/20240624124330.8401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When kernel has pending uretprobes installed, it hijacks original user
function return address on the stack with a uretprobe trampoline
address. There could be multiple such pending uretprobes (either on
different user functions or on the same recursive one) at any given
time within the same task.
This approach interferes with the user stack trace capture logic, which
would report suprising addresses (like 0x7fffffffe000) that correspond
to a special "[uprobes]" section that kernel installs in the target
process address space for uretprobe trampoline code, while logically it
should be an address somewhere within the calling function of another
traced user function.
This is easy to correct for, though. Uprobes subsystem keeps track of
pending uretprobes and records original return addresses. This patch is
using this to do a post-processing step and restore each trampoline
address entries with correct original return address. This is done only
if there are pending uretprobes for current task.
This is a similar approach to what fprobe/kretprobe infrastructure is
doing when capturing kernel stack traces in the presence of pending
return probes.
Link: https://lore.kernel.org/all/20240522013845.1631305-3-andrii@kernel.org/
Reported-by: Riham Selim <rihams@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The per-CPU flush lists, which are accessed from within the NAPI callback
(xdp_do_flush() for instance), are per-CPU. There are subject to the
same problem as struct bpf_redirect_info.
Add the per-CPU lists cpu_map_flush_list, dev_map_flush_list and
xskmap_map_flush_list to struct bpf_net_context. Add wrappers for the
access. The lists initialized on first usage (similar to
bpf_net_ctx_get_ri()).
Cc: "Björn Töpel" <bjorn@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-16-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The XDP redirect process is two staged:
- bpf_prog_run_xdp() is invoked to run a eBPF program which inspects the
packet and makes decisions. While doing that, the per-CPU variable
bpf_redirect_info is used.
- Afterwards xdp_do_redirect() is invoked and accesses bpf_redirect_info
and it may also access other per-CPU variables like xskmap_flush_list.
At the very end of the NAPI callback, xdp_do_flush() is invoked which
does not access bpf_redirect_info but will touch the individual per-CPU
lists.
The per-CPU variables are only used in the NAPI callback hence disabling
bottom halves is the only protection mechanism. Users from preemptible
context (like cpu_map_kthread_run()) explicitly disable bottom halves
for protections reasons.
Without locking in local_bh_disable() on PREEMPT_RT this data structure
requires explicit locking.
PREEMPT_RT has forced-threaded interrupts enabled and every
NAPI-callback runs in a thread. If each thread has its own data
structure then locking can be avoided.
Create a struct bpf_net_context which contains struct bpf_redirect_info.
Define the variable on stack, use bpf_net_ctx_set() to save a pointer to
it, bpf_net_ctx_clear() removes it again.
The bpf_net_ctx_set() may nest. For instance a function can be used from
within NET_RX_SOFTIRQ/ net_rx_action which uses bpf_net_ctx_set() and
NET_TX_SOFTIRQ which does not. Therefore only the first invocations
updates the pointer.
Use bpf_net_ctx_get_ri() as a wrapper to retrieve the current struct
bpf_redirect_info. The returned data structure is zero initialized to
ensure nothing is leaked from stack. This is done on first usage of the
struct. bpf_net_ctx_set() sets bpf_redirect_info::kern_flags to 0 to
note that initialisation is required. First invocation of
bpf_net_ctx_get_ri() will memset() the data structure and update
bpf_redirect_info::kern_flags.
bpf_redirect_info::nh is excluded from memset because it is only used
once BPF_F_NEIGH is set which also sets the nh member. The kern_flags is
moved past nh to exclude it from memset.
The pointer to bpf_net_context is saved task's task_struct. Using
always the bpf_net_context approach has the advantage that there is
almost zero differences between PREEMPT_RT and non-PREEMPT_RT builds.
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-15-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add local_lock_nested_bh() locking. It is based on local_lock_t and the
naming follows the preempt_disable_nested() example.
For !PREEMPT_RT + !LOCKDEP it is a per-CPU annotation for locking
assumptions based on local_bh_disable(). The macro is optimized away
during compilation.
For !PREEMPT_RT + LOCKDEP the local_lock_nested_bh() is reduced to
the usual lock-acquire plus lockdep_assert_in_softirq() - ensuring that
BH is disabled.
For PREEMPT_RT local_lock_nested_bh() acquires the specified per-CPU
lock. It does not disable CPU migration because it relies on
local_bh_disable() disabling CPU migration.
With LOCKDEP it performans the usual lockdep checks as with !PREEMPT_RT.
Due to include hell the softirq check has been moved spinlock.c.
The intention is to use this locking in places where locking of a per-CPU
variable relies on BH being disabled. Instead of treating disabled
bottom halves as a big per-CPU lock, PREEMPT_RT can use this to reduce
the locking scope to what actually needs protecting.
A side effect is that it also documents the protection scope of the
per-CPU variables.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-3-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zac's syzbot crafted a bpf prog that exposed two bugs in may_goto.
The 1st bug is the way may_goto is patched. When offset is negative
it should be patched differently.
The 2nd bug is in the verifier:
when current state may_goto_depth is equal to visited state may_goto_depth
it means there is an actual infinite loop. It's not correct to prune
exploration of the program at this point.
Note, that this check doesn't limit the program to only one may_goto insn,
since 2nd and any further may_goto will increment may_goto_depth only
in the queued state pushed for future exploration. The current state
will have may_goto_depth == 0 regardless of number of may_goto insns
and the verifier has to explore the program until bpf_exit.
Fixes: 011832b97b ("bpf: Introduce may_goto instruction")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/bpf/CAADnVQL-15aNp04-cyHRn47Yv61NXfYyhopyZtUyxNojUZUXpA@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20240619235355.85031-1-alexei.starovoitov@gmail.com
After the rework of "Parallel CPU bringup", the cmdline "nosmp" and
"maxcpus=0" parameters are not working anymore. These parameters set
setup_max_cpus to zero and that's handed to bringup_nonboot_cpus().
The code there does a decrement before checking for zero, which brings it
into the negative space and brings up all CPUs.
Add a zero check at the beginning of the function to prevent this.
[ tglx: Massaged change log ]
Fixes: 18415f33e2 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE")
Fixes: 06c6796e03 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240618081336.3996825-1-chenhuacai@loongson.cn
Modify the comment formatting in irq_find_matching_fwspec function to
enhance code readability and maintain consistency.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614102403.13610-2-shivamurthy.shastri@linutronix.de
A dying worker is first moved from pool->workers to pool->dying_workers
in set_worker_dying() and removed from pool->dying_workers in
detach_dying_workers(). The whole procedure is in the some lock context
of wq_pool_attach_mutex.
So pool->dying_workers is useless, just remove it and keep the dying
worker in pool->workers after set_worker_dying() and remove it in
detach_dying_workers() with wq_pool_attach_mutex held.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), and the detaching of a worker is not required
to be inside the worker thread now, so just do the detaching directly
in idle_cull_fn().
wake_dying_workers() is renamed to detach_dying_workers() and the unneeded
wakeup in wake_dying_workers() is also removed.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
So that when the rescuer is woken up next time, it will not interrupt
the last working cpu which might be busy on other crucial works but
have nothing to do with the rescuer's incoming works.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The code to kick off the destruction of workers is now in a process
context (idle_cull_fn()), so kthread_stop() can be used in the process
context to replace the work of pool->detach_completion.
The wakeup in wake_dying_workers() is unneeded after this change, but it
is harmless, jut keep it here until next patch renames wake_dying_workers()
rather than renaming it again and again.
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Share relocation implementation with the kernel. As part of this,
we also need the type/string iteration functions so also share
btf_iter.c file. Relocation code in kernel and userspace is identical
save for the impementation of the reparenting of split BTF to the
relocated base BTF and retrieval of the BTF header from "struct btf";
these small functions need separate user-space and kernel implementations
for the separate "struct btf"s they operate upon.
One other wrinkle on the kernel side is we have to map .BTF.ids in
modules as they were generated with the type ids used at BTF encoding
time. btf_relocate() optionally returns an array mapping from old BTF
ids to relocated ids, so we use that to fix up these references where
needed for kfuncs.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-5-alan.maguire@oracle.com
...as this will allow split BTF modules with a base BTF
representation (rather than the full vmlinux BTF at time of
BTF encoding) to resolve their references to kernel types in a
way that is more resilient to small changes in kernel types.
This will allow modules that are not built every time the kernel
is to provide more resilient BTF, rather than have it invalidated
every time BTF ids for core kernel types change.
Fields are ordered to avoid holes in struct module.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-3-alan.maguire@oracle.com
The BPF ring buffer internally is implemented as a power-of-2 sized circular
buffer, with two logical and ever-increasing counters: consumer_pos is the
consumer counter to show which logical position the consumer consumed the
data, and producer_pos which is the producer counter denoting the amount of
data reserved by all producers.
Each time a record is reserved, the producer that "owns" the record will
successfully advance producer counter. In user space each time a record is
read, the consumer of the data advanced the consumer counter once it finished
processing. Both counters are stored in separate pages so that from user
space, the producer counter is read-only and the consumer counter is read-write.
One aspect that simplifies and thus speeds up the implementation of both
producers and consumers is how the data area is mapped twice contiguously
back-to-back in the virtual memory, allowing to not take any special measures
for samples that have to wrap around at the end of the circular buffer data
area, because the next page after the last data page would be first data page
again, and thus the sample will still appear completely contiguous in virtual
memory.
Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for
book-keeping the length and offset, and is inaccessible to the BPF program.
Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ`
for the BPF program to use. Bing-Jhong and Muhammad reported that it is however
possible to make a second allocated memory chunk overlapping with the first
chunk and as a result, the BPF program is now able to edit first chunk's
header.
For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size
of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to
bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in
[0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets
allocate a chunk B with size 0x3000. This will succeed because consumer_pos
was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask`
check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able
to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned
earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data
pages. This means that chunk B at [0x4000,0x4008] is chunk A's header.
bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then
locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk
B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong
page and could cause a crash.
Fix it by calculating the oldest pending_pos and check whether the range
from the oldest outstanding record to the newest would span beyond the ring
buffer size. If that is the case, then reject the request. We've tested with
the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh)
before/after the fix and while it seems a bit slower on some benchmarks, it
is still not significantly enough to matter.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Co-developed-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621140828.18238-1-daniel@iogearbox.net
When the following program is processed by the verifier:
L1: may_goto L2
goto L1
L2: w0 = 0
exit
the may_goto insn is first converted to:
L1: r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
then later as the last step the verifier inserts:
*(u64 *)(r10 -8) = BPF_MAX_LOOPS
as the first insn of the program to initialize loop count.
When the first insn happens to be a branch target of some jmp the
bpf_patch_insn_data() logic will produce:
L1: *(u64 *)(r10 -8) = BPF_MAX_LOOPS
r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
because instruction patching adjusts all jmps and calls, but for this
particular corner case it's incorrect and the L1 label should be one
instruction down, like:
*(u64 *)(r10 -8) = BPF_MAX_LOOPS
L1: r11 = *(u64 *)(r10 -8)
if r11 == 0x0 goto L2
r11 -= 1
*(u64 *)(r10 -8) = r11
goto L1
L2: w0 = 0
exit
and that's what this patch is fixing.
After bpf_patch_insn_data() call adjust_jmp_off() to adjust all jmps
that point to newly insert BPF_ST insn to point to insn after.
Note that bpf_patch_insn_data() cannot easily be changed to accommodate
this logic, since jumps that point before or after a sequence of patched
instructions have to be adjusted with the full length of the patch.
Conceptually it's somewhat similar to "insert" of instructions between other
instructions with weird semantics. Like "insert" before 1st insn would require
adjustment of CALL insns to point to newly inserted 1st insn, but not an
adjustment JMP insns that point to 1st, yet still adjusting JMP insns that
cross over 1st insn (point to insn before or insn after), hence use simple
adjust_jmp_off() logic to fix this corner case. Ideally bpf_patch_insn_data()
would have an auxiliary info to say where 'the start of newly inserted patch
is', but it would be too complex for backport.
Fixes: 011832b97b ("bpf: Introduce may_goto instruction")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Closes: https://lore.kernel.org/bpf/CAADnVQJ_WWx8w4b=6Gc2EpzAjgv+6A0ridnMz2TvS2egj4r3Gw@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20240619011859.79334-1-alexei.starovoitov@gmail.com
The new generic LSM hook security_file_post_open() was recently added
to the LSM framework in commit 8f46ff5767 ("security: Introduce
file_post_open hook"). Let's proactively add this generic LSM hook to
the sleepable_lsm_hooks BTF ID set, because I can't see there being
any strong reasons not to, and it's only a matter of time before
someone else comes around and asks for it to be there.
security_file_post_open() is inherently sleepable as it's purposely
situated in the kernel that allows LSMs to directly read out the
contents of the backing file if need be. Additionally, it's called
directly after security_file_open(), and that LSM hook in itself
already exists in the sleepable_lsm_hooks BTF ID set.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240618192923.379852-1-mattbobrowski@google.com
This reverts [1] and changes return value for bpf_session_cookie
in bpf selftests. Having long * might lead to problems on 32-bit
architectures.
Fixes: 2b8dd87332 ("bpf: Make bpf_session_cookie() kfunc return long *")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240619081624.1620152-1-jolsa@kernel.org
The function returns the idle calls counter for the current cpu and
therefore usually isn't what the caller wants. It is unnused since
commit 466a2b42d6 ("cpufreq: schedutil: Use idle_calls counter of the
remote CPU")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240617161615.49309-1-christian.loehle@arm.com
Commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
removed the only definition of macro _TIF_MCA_INIT, so kdb_curr_task()
is actually the same as curr_task() now and becomes redundant.
Let's remove the definition of kdb_curr_task() and replace remaining
calls with curr_task().
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240620142132.157518-1-zhengzengkai@huawei.com
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The function kdb_position_cursor() takes in a "prompt" parameter but
never uses it. This doesn't _really_ matter since all current callers
of the function pass the same value and it's a global variable, but
it's a bit ugly. Let's clean it up.
Found by code inspection. This patch is expected to functionally be a
no-op.
Fixes: 09b3598942 ("kdb: Use format-strings rather than '\0' injection in kdb_read()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240528071144.1.I0feb49839c6b6f4f2c4bf34764f5e95de3f55a66@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
When -Wformat-security is not disabled, using a string pointer
as a format causes a warning:
kernel/debug/kdb/kdb_io.c: In function 'kdb_read':
kernel/debug/kdb/kdb_io.c:365:36: error: format not a string literal and no format arguments [-Werror=format-security]
365 | kdb_printf(kdb_prompt_str);
| ^~~~~~~~~~~~~~
kernel/debug/kdb/kdb_io.c: In function 'kdb_getstr':
kernel/debug/kdb/kdb_io.c:456:20: error: format not a string literal and no format arguments [-Werror=format-security]
456 | kdb_printf(kdb_prompt_str);
| ^~~~~~~~~~~~~~
Use an explcit "%s" format instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5d5314d679 ("kdb: core for kgdb back end (1 of 2)")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240528121154.3662553-1-arnd@kernel.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
This new_n is defined in the start of this function.
Its value is overwritten by `new_n = min(n, log->len_total);`
a couple lines before my change,
rendering the shadow declaration unnecessary.
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Link: https://lore.kernel.org/r/20240615022641.210320-4-rafael@rcpassos.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes a compiler warning. The __bpf_free_used_btfs function
was taking an extra unused struct bpf_prog_aux *aux param
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Link: https://lore.kernel.org/r/20240615022641.210320-3-rafael@rcpassos.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes a compiler warning. the bpf_jit_binary_pack_finalize function
was taking an extra bpf_prog parameter that went unused.
This removves it and updates the callers accordingly.
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Link: https://lore.kernel.org/r/20240615022641.210320-2-rafael@rcpassos.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's confusing to inspect 'prog->aux->tail_call_reachable' with drgn[0],
when bpf prog has tail call but 'tail_call_reachable' is false.
This patch corrects 'tail_call_reachable' when bpf prog has tail call.
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240610124224.34673-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Lb9b
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
Current try_to_grab_pending() activates the inactive item and
subsequently treats it as though it were a standard activated item.
This approach prevents duplicating handling logic for both active and
inactive items, yet the premature activation of an inactive item
triggers trace_workqueue_activate_work(), yielding an unintended user
space visible side effect.
And the unnecessary increment of the nr_active, which is not a simple
counter now, followed by a counteracted decrement, is inefficient and
complicates the code.
Just remove the nr_active manipulation code in grabbing inactive items.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The "cpuset.cpus.exclusive.effective" value is currently limited to a
subset of its "cpuset.cpus". This makes the exclusive CPUs distribution
hierarchy subsumed within the larger "cpuset.cpus" hierarchy. We have to
decide on what CPUs are used locally and what CPUs can be passed down as
exclusive CPUs down the hierarchy and combine them into "cpuset.cpus".
The advantage of the current scheme is to have only one hierarchy to
worry about. However, it make it harder to use as all the "cpuset.cpus"
values have to be properly set along the way down to the designated remote
partition root. It also makes it more cumbersome to find out what CPUs
can be used locally.
Make creation of remote partition simpler by breaking the
dependency of "cpuset.cpus.exclusive" on "cpuset.cpus" and make
them independent entities. Now we have two separate hierarchies -
one for setting "cpuset.cpus.effective" and the other one for setting
"cpuset.cpus.exclusive.effective". We may not need to set "cpuset.cpus"
when we activate a partition root anymore.
Also update Documentation/admin-guide/cgroup-v2.rst and cpuset.c comment
to document this change.
Suggested-by: Petr Malat <oss@malat.biz>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The CS_CPU_EXCLUSIVE flag is currently set whenever cpuset.cpus.exclusive
is set to make sure that the exclusivity test will be run to ensure its
exclusiveness. At the same time, this flag can be changed whenever the
partition root state is changed. For example, the CS_CPU_EXCLUSIVE flag
will be reset whenever a partition root becomes invalid. This makes
using CS_CPU_EXCLUSIVE to ensure exclusiveness a bit fragile.
The current scheme also makes setting up a cpuset.cpus.exclusive
hierarchy to enable remote partition harder as cpuset.cpus.exclusive
cannot overlap with any cpuset.cpus of sibling cpusets if their
cpuset.cpus.exclusive aren't set.
Solve these issues by deferring the setting of CS_CPU_EXCLUSIVE flag
until the cpuset become a valid partition root while adding new checks
in validate_change() to ensure that cpuset.cpus.exclusive of sibling
cpusets cannot overlap.
An additional check is also added to validate_change() to make sure that
cpuset.cpus of one cpuset cannot be a subset of cpuset.cpus.exclusive
of a sibling cpuset to avoid the problem that none of those CPUs will
be available when these exclusive CPUs are extracted out to a newly
enabled partition root. The Documentation/admin-guide/cgroup-v2.rst
file is updated to document the new constraints.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 181c8e091a ("cgroup/cpuset: Introduce remote partition"),
a remote partition can be created underneath a non-partition root cpuset
as long as its exclusive_cpus are set to distribute exclusive CPUs down
to its children. The generate_sched_domains() function, however, doesn't
take into account this new behavior and hence will fail to create the
sched domain needed for a remote root (non-isolated) partition.
There are two issues related to remote partition support. First of
all, generate_sched_domains() has a fast path that is activated if
root_load_balance is true and top_cpuset.nr_subparts is non-zero. The
later condition isn't quite correct for remote partitions as nr_subparts
just shows the number of local child partitions underneath it. There
can be no local child partition under top_cpuset even if there are
remote partitions further down the hierarchy. Fix that by checking
for subpartitions_cpus which contains exclusive CPUs allocated to both
local and remote partitions.
Secondly, the valid partition check for subtree skipping in the csa[]
generation loop isn't enough as remote partition does not need to
have a partition root parent. Fix this problem by breaking csa[] array
generation loop of generate_sched_domains() into v1 and v2 specific parts
and checking a cpuset's exclusive_cpus before skipping its subtree in
the v2 case.
Also simplify generate_sched_domains() for cgroup v2 as only
non-isolating partition roots should be included in building the cpuset
array and none of the v1 scheduling attributes other than a different
way to create an isolated partition are supported.
Fixes: 181c8e091a ("cgroup/cpuset: Introduce remote partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Restrict gen-API tests for synthetic and kprobe events to only be built as
modules, as they generate dynamic events that cannot be removed, causing
ftracetest and startup selftests to fail.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZy6HobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqtYIAMLap5hV/w9Gh5b32hOF
/FS/oqGTIs8wfvZq2PBOruFmmvhrqjvpbZVTU9aNUr2lywYALM+jgO3ElSLIoZdz
5s8Wsnic5a2DvG23r/S5u80f85Gxy14e5fvCcCT/3Bvw1ip65XdMXqUwh9oM4zHh
i8rmeIIJmVspHD9bxTREsosB8/LKvSx6GNzLrHwHyL5UepDgj/r5hLvyEuY3fyuo
hazbvsZbHi+aduAS3it+BnhMoFLgLzqrYi8dl1fPY+xmnGI2LZZkds1mfD1JmjBB
AVm9gOWKpW+HHoxeMEMcAs8mhithR7VGA2V2zdsOmRzndytKhUghHWvgcrBZWvl6
D5Y=
=BNpD
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Restrict gen-API tests for synthetic and kprobe events to only be
built as modules, as they generate dynamic events that cannot be
removed, causing ftracetest and startup selftests to fail
* tag 'probes-fixes-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Build event generation tests only as modules
cgroup_exit() needs to do this only if the exiting task is a leader and it
is not the last live thread. The patch doesn't use delay_group_leader(),
atomic_read(signal->live) matches the code css_task_iter_advance() more.
cgroup_release() can now check list_empty(task->cg_list) before it takes
css_set_lock and calls ss_set_skip_task_iters().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit adds the get_completed_synchronize_srcu() and the
same_state_synchronize_srcu() functions. The first returns a cookie
that is always interpreted as corresponding to an expired grace period.
The second does an equality comparison of a pair of cookies.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have polled SRCU grace periods, a grace period can be
started by start_poll_synchronize_srcu() as well as call_srcu(),
synchronize_srcu(), and synchronize_srcu_expedited(). This commit
therefore calls out this new start_poll_synchronize_srcu() possibility
in the comment on the WARN_ON().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Interrupts are enabled in srcu_gp_end(), so this commit switches from
spin_lock_irqsave_rcu_node() and spin_unlock_irqrestore_rcu_node()
to spin_lock_irq_rcu_node() and spin_unlock_irq_rcu_node().
Link: https://lore.kernel.org/all/febb13ab-a4bb-48b4-8e97-7e9f7749e6da@moroto.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Interrupts are enabled in rcu_gp_init(), so this commit switches from
local_irq_save() and local_irq_restore() to local_irq_disable() and
local_irq_enable().
Link: https://lore.kernel.org/all/febb13ab-a4bb-48b4-8e97-7e9f7749e6da@moroto.mountain/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the synchronize_rcu() common case, we will have less than
SR_MAX_USERS_WAKE_FROM_GP number of users per GP. Waking up the kworker
is pointless just to free the last injected wait head since at that point,
all the users have already been awakened.
Introduce a new counter to track this and prevent the wakeup in the
common case.
[ paulmck: Remove atomic_dec_return_release in cannot-happen state. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
-----BEGIN PGP SIGNATURE-----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=nYky
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A single LSM/IMA patch to fix a problem caused by sleeping while in a
RCU critical section"
* tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: Avoid blocking in RCU read-side critical section
Mainly MM singleton fixes. And a couple of ocfs2 regression fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZnCEQAAKCRDdBJ7gKXxA
jmgSAQDk3BYs1n67cnwx/Zi04yMYDyfYTCYg2udPfT2a+GpmbwD+N5dJd/vCztXH
5eLpP11xd/yr2+I9FefyZeUuA80KtgQ=
=2agY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Mainly MM singleton fixes. And a couple of ocfs2 regression fixes"
* tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kcov: don't lose track of remote references during softirqs
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick
mm: fix possible OOB in numa_rebuild_large_mapping()
mm/migrate: fix kernel BUG at mm/compaction.c:2761!
selftests: mm: make map_fixed_noreplace test names stable
mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
gcov: add support for GCC 14
zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get()
lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n
MAINTAINERS: remove Lorenzo as vmalloc reviewer
Revert "mm: init_mlocked_on_free_v3"
mm/page_table_check: fix crash on ZONE_DEVICE
gcc: disable '-Warray-bounds' for gcc-9
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
In coerce_subreg_to_size_sx(), for the case where upper
sign extension bits are the same for smax32 and smin32
values, we missed to setup properly. This is especially
problematic if both smax32 and smin32's sign extension
bits are 1.
The following is a simple example illustrating the inconsistent
verifier states due to missed var_off:
0: (85) call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: (bf) r3 = r0 ; R0_w=scalar(id=1) R3_w=scalar(id=1)
2: (57) r3 &= 15 ; R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=15,var_off=(0x0; 0xf))
3: (47) r3 |= 128 ; R3_w=scalar(smin=umin=smin32=umin32=128,smax=umax=smax32=umax32=143,var_off=(0x80; 0xf))
4: (bc) w7 = (s8)w3
REG INVARIANTS VIOLATION (alu): range bounds violation u64=[0xffffff80, 0x8f] s64=[0xffffff80, 0x8f]
u32=[0xffffff80, 0x8f] s32=[0x80, 0xffffff8f] var_off=(0x80, 0xf)
The var_off=(0x80, 0xf) is not correct, and the correct one should
be var_off=(0xffffff80; 0xf) since from insn 3, we know that at
insn 4, the sign extension bits will be 1. This patch fixed this
issue by setting var_off properly.
Fixes: 8100928c88 ("bpf: Support new sign-extension mov insns")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174632.3995278-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Zac reported a verification failure and Alexei reproduced the issue
with a simple reproducer ([1]). The verification failure is due to missed
setting for var_off.
The following is the reproducer in [1]:
0: R1=ctx() R10=fp0
0: (71) r3 = *(u8 *)(r10 -387) ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R10=fp0
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
2: (36) if w7 >= 0x2533823b goto pc-3
mark_precise: frame0: last_idx 2 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r7 stack= before 1: (bc) w7 = (s8)w3
mark_precise: frame0: regs=r3 stack= before 0: (71) r3 = *(u8 *)(r10 -387)
2: R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
3: (b4) w0 = 0 ; R0_w=0
4: (95) exit
Note that after insn 1, the var_off for R7 is (0x0; 0x7f). This is not correct
since upper 24 bits of w7 could be 0 or 1. So correct var_off should be
(0x0; 0xffffffff). Missing var_off setting in set_sext32_default_val() caused later
incorrect analysis in zext_32_to_64(dst_reg) and reg_bounds_sync(dst_reg).
To fix the issue, set var_off correctly in set_sext32_default_val(). The correct
reg state after insn 1 becomes:
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=0,smax=umax=0xffffffff,smin32=-128,smax32=127,var_off=(0x0; 0xffffffff))
and at insn 2, the verifier correctly determines either branch is possible.
[1] https://lore.kernel.org/bpf/CAADnVQLPU0Shz7dWV4bn2BgtGdxN3uFHPeobGBA72tpg5Xoykw@mail.gmail.com/
Fixes: 8100928c88 ("bpf: Support new sign-extension mov insns")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174626.3994813-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ACPI MADT doesn't allow to offline a CPU after it has been woken up.
Currently, CPU hotplug is prevented based on the confidential computing
attribute which is set for Intel TDX. But TDX is not the only possible user of
the wake up method. Any platform that uses ACPI MADT wakeup method cannot
offline CPU.
Disable CPU offlining on ACPI MADT wakeup enumeration.
This has no visible effects for users: currently, TDX guest is the only platform
that uses the ACPI MADT wakeup method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com
The ACPI MADT mailbox wakeup method doesn't allow to offline a CPU after
it has been woken up.
Currently, offlining is prevented based on the confidential computing attribute
which is set for Intel TDX. But TDX is not the only possible user of the wake up
method. The MADT wakeup can be implemented outside of a confidential computing
environment. Offline support is a property of the wakeup method, not the CoCo
implementation.
Introduce cpu_hotplug_disable_offlining() that can be called to indicate that
CPU offlining should be disabled.
This function is going to replace CC_ATTR_HOTPLUG_DISABLED for ACPI MADT wakeup
method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-4-kirill.shutemov@linux.intel.com
Domain creation functions use __irq_domain_add(). With the introduction
of irq_domain_instantiate(), __irq_domain_add() becomes obsolete.
In order to fully remove __irq_domain_add(), convert domain
creation function to irq_domain_instantiate()
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-19-herve.codina@bootlin.com
The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.
Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
- Allocate generic irq chips with irq_alloc_domain_generic_chips()
- Retrieve the generic irq chips with irq_get_domain_generic_chip()
- Initialize retrieved chips: set register base address and offsets,
set several hooks such as irq_mask, irq_unmask, ...
With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.
In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com
Most of generic chip drivers need to perform some more additional
initializations on the generic chips allocated before they can be fully
ready.
These additional initializations need to be performed before the IRQ
domain is published to avoid a race condition between IRQ consumers and
suppliers.
Introduce the init() hook to perform these initializations at the right
place just after the generic chip creation. Also introduce the exit() hook
to allow reverting operations done by the init() hook just before the
generic chip is destroyed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-15-herve.codina@bootlin.com
The existing __irq_alloc_domain_generic_chips() uses a bunch of parameters
to describe the generic chips that need to be allocated.
Adding more parameters and wrappers to hide new parameters in the existing
code leads to more and more code without any relevant values and without
any flexibility.
Introduce irq_domain_alloc_generic_chips() where the generic chips
description is done using the irq_domain_chip_generic_info structure
instead of the bunch of parameters to allow flexibility and easy evolution.
Also introduce irq_domain_remove_generic_chips() to revert the operations
done by irq_domain_alloc_generic_chips().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-14-herve.codina@bootlin.com
The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.
Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com
irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.
In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com
__irq_domain_create() can fail for several reasons. When it fails it
returns a NULL pointer and so filters out the exact failure reason.
The only user of __irq_domain_create() is irq_domain_instantiate() which
can return a PTR_ERR value. On __irq_domain_create() failure, it uses an
arbitrary error code.
Rather than using this arbitrary error value, make __irq_domain_create()
return is own error code and use that one.
[ tglx: Remove the pointless ERR_CAST. domain is a valid return pointer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-11-herve.codina@bootlin.com
irq_domain_instantiate() handles all needs to be used in
irq_domain_create_hierarchy()
Avoid code duplication and use directly irq_domain_instantiate() for
hierarchy domain creation.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-10-herve.codina@bootlin.com
To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.
Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com
In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.
Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com
The existing __irq_domain_create() use a bunch of parameters to create
an irq domain.
With the introduction of irq_domain_info structure, these parameters are
available in the information structure itself.
Using directly this information structure allows future flexibility to
add other parameters in a simple way without the need to change the
__irq_domain_create() prototype.
Convert __irq_domain_create() to use the information structure.
[ tglx: Fixup struct initializer ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-7-herve.codina@bootlin.com
The interrupt domain name computation and setting is directly done in
__irq_domain_create(). This leads to a quite long __irq_domain_create()
function.
In order to simplify __irq_domain_create() and isolate the domain name
computation and setting, move the related operations to a dedicated
function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-6-herve.codina@bootlin.com
The existing irq_domain_add_*() functions used to instantiate an IRQ
domain are wrappers built on top of __irq_domain_add() and describe the
domain properties using a bunch of parameters.
Adding more parameters and wrappers to hide new parameters in the
existing code lead to more and more code without any relevant value and
without any flexibility.
Introduce irq_domain_instantiate() where the interrupt domain properties
are given using a irq_domain_info structure instead of the bunch of
parameters to allow flexibility and easy evolution.
irq_domain_instantiate() performs the same operation as the one done by
__irq_domain_add(). For compatibility reason with existing code, keep
__irq_domain_add() but convert it to irq_domain_instantiate().
[ tglx: Fixed up struct initializer coding style ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-3-herve.codina@bootlin.com
In preparation of the introduction of the irq domain instantiation,
introduce irq_domain_free() to avoid code duplication on later
modifications.
This new function is an extraction of the current operations performed
to free the irq domain. No functional change intended.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-2-herve.codina@bootlin.com
fwnode_handle_get(fwnode) is called when a domain is created with fwnode
passed as a function parameter. fwnode_handle_put(domain->fwnode) is called
when the domain is destroyed but during the creation a path exists that
does not set domain->fwnode.
If this path is taken, the fwnode get will never be put.
To avoid the unbalanced get and put, set domain->fwnode unconditionally.
Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614173232.1184015-4-herve.codina@bootlin.com
Whenever CPU hotplug state callbacks are registered, the startup callback
is invoked on CPUs that have already reached the provided state in order of
ascending CPU IDs.
In freeze_secondary_cpus() the teardown of CPUs happens in the same are
invoked in the same order. This is known to make a difference is the
current implementation of these callbacks in arch/x86/events/intel/uncore.c:
- uncore_event_cpu_online() designates the first CPU it is invoked for
on each package as the uncore event collector for that package
- uncore_event_cpu_offline() if the CPU being offlined is the event
collector for its package, transfers that responsibility over to
the next (by ascending CPU id) one in the same package
With the current order of CPU teardowns in freeze_secondary_cpus(), the
latter ends up doing the ownership transfer work on every single CPU. That
work involves a synchronize_rcu() call, ultimately unnecessarily degrading
the performance of CPU offlining.
To address this make freeze_secondary_cpus() iterate through the CPUs in
reverse order, so that the teardown happens in order of descending CPU IDs.
[ tglx: Massage change log ]
Signed-off-by: Stanislav Spassov <stanspas@amazon.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240524160449.48594-1-stanspas@amazon.de
Fixes the following two Coccinelle/coccicheck warnings reported by
string_choices.cocci:
opportunity for str_plural(num_cpus)
opportunity for str_plural(num_nodes)
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240508154225.309703-2-thorsten.blum@toblux.com
Commit 4205e4786d ("cpu/hotplug: Provide dynamic range for prepare
stage") added a dynamic range for the prepare states, but did not handle
the assignment of the dynstate variable in __cpuhp_setup_state_cpuslocked().
This causes the corresponding startup callback not to be invoked when
calling __cpuhp_setup_state_cpuslocked() with the CPUHP_BP_PREPARE_DYN
parameter, even though it should be.
Currently, the users of __cpuhp_setup_state_cpuslocked(), for one reason or
another, have not triggered this bug.
Fixes: 4205e4786d ("cpu/hotplug: Provide dynamic range for prepare stage")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240515134554.427071-1-ytcoode@gmail.com
In kcov_remote_start()/kcov_remote_stop(), we swap the previous KCOV
metadata of the current task into a per-CPU variable. However, the
kcov_mode_enabled(mode) check is not sufficient in the case of remote KCOV
coverage: current->kcov_mode always remains KCOV_MODE_DISABLED for remote
KCOV objects.
If the original task that has invoked the KCOV_REMOTE_ENABLE ioctl happens
to get interrupted and kcov_remote_start() is called, it ultimately leads
to kcov_remote_stop() NOT restoring the original KCOV reference. So when
the task exits, all registered remote KCOV handles remain active forever.
The most uncomfortable effect (at least for syzkaller) is that the bug
prevents the reuse of the same /sys/kernel/debug/kcov descriptor. If
we obtain it in the parent process and then e.g. drop some
capabilities and continuously fork to execute individual programs, at
some point current->kcov of the forked process is lost,
kcov_task_exit() takes no action, and all KCOV_REMOTE_ENABLE ioctls
calls from subsequent forks fail.
And, yes, the efficiency is also affected if we keep on losing remote
kcov objects.
a) kcov_remote_map keeps on growing forever.
b) (If I'm not mistaken), we're also not freeing the memory referenced
by kcov->area.
Fix it by introducing a special kcov_mode that is assigned to the task
that owns a KCOV remote object. It makes kcov_mode_enabled() return true
and yet does not trigger coverage collection in __sanitizer_cov_trace_pc()
and write_comp_data().
[nogikh@google.com: replace WRITE_ONCE() with an ordinary assignment]
Link: https://lkml.kernel.org/r/20240614171221.2837584-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20240611133229.527822-1-nogikh@google.com
Fixes: 5ff3b30ab5 ("kcov: collect coverage from interrupts")
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using gcov on kernels compiled with GCC 14 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 14.
Tested with GCC versions 14.1.0 and 13.2.0.
Link: https://lkml.kernel.org/r/20240610092743.1609845-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kernel_wait4() doesn't sleep and returns -EINTR if there is no
eligible child and signal_pending() is true.
That is why zap_pid_ns_processes() clears TIF_SIGPENDING but this is not
enough, it should also clear TIF_NOTIFY_SIGNAL to make signal_pending()
return false and avoid a busy-wait loop.
Link: https://lkml.kernel.org/r/20240608120616.GB7947@redhat.com
Fixes: 12db8b6900 ("entry: Add support for TIF_NOTIFY_SIGNAL")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Rachel Menge <rachelmenge@linux.microsoft.com>
Closes: https://lore.kernel.org/all/1386cd49-36d0-4a5c-85e9-bc42056a5a38@linux.microsoft.com/
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Wei Fu <fuweid89@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Allen Pais <apais@linux.microsoft.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For tests that need to allocate using vm_mmap() (e.g. usercopy and
execve), provide the interface to have the allocation tracked by KUnit
itself. This requires bringing up a placeholder userspace mm.
This combines my earlier attempt at this with Mark Rutland's version[1].
Normally alloc_mm() and arch_pick_mmap_layout() aren't exported for
modules, so export these only for KUnit testing.
Link: https://lore.kernel.org/lkml/20230321122514.1743889-2-mark.rutland@arm.com/ [1]
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmykPwAKCRDbK58LschI
g7LOAQDVPkJ9k50/xrWIBtgvkGq1jCrMlpwEh49QYO0xoqh1IgEA+6Xje9jCIsdp
AHz9WmZ6G0EpTuDgFq50K1NVZ7MgSQE=
=zKfv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-14
We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).
The main changes are:
1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
triggered via __bpf_try_make_writable(), from Florian Westphal.
2) Fix removal of kfuncs during linking phase which then throws a kernel
build warning via resolve_btfids about unresolved symbols,
from Tony Ambardar.
3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
is not available on User Mode Linux, from Maciej Żenczykowski.
4) Fix a register corruption in reg_set_min_max triggering an invariant
violation in BPF verifier, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Harden __bpf_kfunc tag against linker kfunc removal
compiler_types.h: Define __retain for __attribute__((__retain__))
bpf: Avoid splat in pskb_pull_reason
bpf: fix UML x86_64 compile failure
selftests/bpf: Add test coverage for reg_set_min_max handling
bpf: Reduce stack consumption in check_stack_write_fixed_off
bpf: Fix reg_set_min_max corruption of fake_reg
MAINTAINERS: mailmap: Update Stanislav's email address
====================
Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compilers can generate the code
r1 = r2
r1 += 0x1
if r2 < 1000 goto ...
use knowledge of r2 range in subsequent r1 operations
So remember constant delta between r2 and r1 and update r1 after 'if' condition.
Unfortunately LLVM still uses this pattern for loops with 'can_loop' construct:
for (i = 0; i < 1000 && can_loop; i++)
The "undo" pass was introduced in LLVM
https://reviews.llvm.org/D121937
to prevent this optimization, but it cannot cover all cases.
Instead of fighting middle end optimizer in BPF backend teach the verifier
about this pattern.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613013815.953-3-alexei.starovoitov@gmail.com
In function_graph_enter() there's a loop that looks at fgraph_array[]
elements which are fgraph_ops. It first tests if it is a fgraph_stub op,
and if so skips it, as that's just there as a place holder. Then it checks
the fgraph_ops filters to see if the ops wants to trace the current
function.
But if the compiler reloads the fgraph_array[] after the check against
fgraph_stub, it could race with the fgraph_array[] being updated with the
fgraph_stub. That would cause the stub to be processed. But the stub has a
null "func_hash" field which will cause a NULL pointer dereference.
Add a READ_ONCE() so that the gops that is compared against the
fgraph_stub is also the gops that is processed later.
Link: https://lore.kernel.org/all/CA+G9fYsSVJQZH=nM=1cjTc94PgSnMF9y65BnOv6XSoCG_b6wmw@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240613095223.1f07e3a4@rorschach.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Some ciphers do not require state and IV buffer, but with current
implementation 0-sized dynptr is always needed. With adjustment to
verifier we can provide NULL instead of 0-sized dynptr. Make crypto
kfuncs ready for this.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-3-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some arguments to kfuncs might be NULL in some cases. But currently it's
not possible to pass NULL to any BTF structures because the check for
the suffix is located after all type checks. Move it to earlier place
to allow nullable args.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-2-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pcpu_hot (defined in arch/x86) is not available on user mode linux (ARCH=um)
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Fixes: 1ae6921009 ("bpf: inline bpf_get_smp_processor_id() helper")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240613173146.2524647-1-maze@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fake_reg moved into env->fake_reg given it consumes a lot of stack
space (120 bytes). Migrate the fake_reg in check_stack_write_fixed_off()
as well now that we have it.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240613115310.25383-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:
[...]
13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar()
14: (b7) r0 = 0 ; R0_w=0
15: (b4) w0 = -1 ; R0_w=0xffffffff
16: (74) w0 >>= 1 ; R0_w=0x7fffffff
17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
19: (56) if w6 != 0x7ffffffd goto pc+1
REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
19: R6_w=0x7fffffff
20: (95) exit
from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
23: (95) exit
from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: (14) w6 -= 14 ; R6_w=0
[...]
What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).
Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).
When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():
[...]
t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
reg1->var_off = tnum_with_subreg(reg1->var_off, t);
reg2->var_off = tnum_with_subreg(reg2->var_off, t);
[...]
Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.
Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.
[0] https://github.com/google/buzzer
Fixes: 67420501e8 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit is part of a greater effort to remove all
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Signed-off-by: Joel Granados <j.granados@samsung.com>
Previously, kfunc declarations in bpf_kfuncs.h (and others) used "user
facing" types for kfuncs prototypes while the actual kfunc definitions
used "kernel facing" types. More specifically: bpf_dynptr vs
bpf_dynptr_kern, __sk_buff vs sk_buff, and xdp_md vs xdp_buff.
It wasn't an issue before, as the verifier allows aliased types.
However, since we are now generating kfunc prototypes in vmlinux.h (in
addition to keeping bpf_kfuncs.h around), this conflict creates
compilation errors.
Fix this conflict by using "user facing" types in kfunc definitions.
This results in more casts, but otherwise has no additional runtime
cost.
Note, similar to 5b268d1ebc ("bpf: Have bpf_rdonly_cast() take a const
pointer"), we also make kfuncs take const arguments where appropriate in
order to make the kfunc more permissive.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/b58346a63a0e66bc9b7504da751b526b0b189a67.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, if a kfunc accepts a projection type as an argument (eg
struct __sk_buff *), the caller must exactly provide exactly the same
type with provable provenance.
However in practice, kfuncs that accept projection types _must_ cast to
the underlying type before use b/c projection type layouts are
completely made up. Thus, it is ok to relax the verifier rules around
implicit conversions.
We will use this functionality in the next commit when we align kfuncs
to user-facing types.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/e2c025cb09ccfd4af1ec9e18284dc3cecff7514d.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We will soon be generating kfunc prototypes from BTF. As part of that,
we need to align the manual signatures in bpf_kfuncs.h with the actual
kfunc definitions. There is currently a conflicting signature for
bpf_session_cookie() w.r.t. return type.
The original intent was to return long * and not __u64 *. You can see
evidence of that intent in a3a5113393 ("selftests/bpf: Add kprobe
session cookie test").
Fix conflict by changing kfunc definition.
Fixes: 5c919acef8 ("bpf: Add support for kprobe session cookie")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/7043e1c251ab33151d6e3830f8ea1902ed2604ac.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This cleanup all kprobe events code is not related to the selftest
itself, and it can fail by the reason unrelated to this test.
If the test is successful, the generated events are cleaned up.
And if not, we cannot guarantee that the kprobe events will work
correctly. So, anyway, there is no need to clean it up.
Link: https://lore.kernel.org/all/171811265627.85078.16897867213512435822.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cleanup the redundant WARN_ON_ONCE(cond) + pr_warn(msg) into
WARN_ONCE(cond, msg). Also add some WARN_ONCE() for hitcount check.
These WARN_ONCE() errors makes it easy to handle errors from ktest.
Link: https://lore.kernel.org/all/171811264685.85078.8068819097047430463.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding uretprobe syscall instead of trap to speed up return probe.
At the moment the uretprobe setup/path is:
- install entry uprobe
- when the uprobe is hit, it overwrites probed function's return address
on stack with address of the trampoline that contains breakpoint
instruction
- the breakpoint trap code handles the uretprobe consumers execution and
jumps back to original return address
This patch replaces the above trampoline's breakpoint instruction with new
ureprobe syscall call. This syscall does exactly the same job as the trap
with some more extra work:
- syscall trampoline must save original value for rax/r11/rcx registers
on stack - rax is set to syscall number and r11/rcx are changed and
used by syscall instruction
- the syscall code reads the original values of those registers and
restore those values in task's pt_regs area
- only caller from trampoline exposed in '[uprobes]' is allowed,
the process will receive SIGILL signal otherwise
Even with some extra work, using the uretprobes syscall shows speed
improvement (compared to using standard breakpoint):
On Intel (11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz)
current:
uretprobe-nop : 1.498 ± 0.000M/s
uretprobe-push : 1.448 ± 0.001M/s
uretprobe-ret : 0.816 ± 0.001M/s
with the fix:
uretprobe-nop : 1.969 ± 0.002M/s < 31% speed up
uretprobe-push : 1.910 ± 0.000M/s < 31% speed up
uretprobe-ret : 0.934 ± 0.000M/s < 14% speed up
On Amd (AMD Ryzen 7 5700U)
current:
uretprobe-nop : 0.778 ± 0.001M/s
uretprobe-push : 0.744 ± 0.001M/s
uretprobe-ret : 0.540 ± 0.001M/s
with the fix:
uretprobe-nop : 0.860 ± 0.001M/s < 10% speed up
uretprobe-push : 0.818 ± 0.001M/s < 10% speed up
uretprobe-ret : 0.578 ± 0.000M/s < 7% speed up
The performance test spawns a thread that runs loop which triggers
uprobe with attached bpf program that increments the counter that
gets printed in results above.
The uprobe (and uretprobe) kind is determined by which instruction
is being patched with breakpoint instruction. That's also important
for uretprobes, because uprobe is installed for each uretprobe.
The performance test is part of bpf selftests:
tools/testing/selftests/bpf/run_bench_uprobes.sh
Note at the moment uretprobe syscall is supported only for native
64-bit process, compat process still uses standard breakpoint.
Note that when shadow stack is enabled the uretprobe syscall returns
via iret, which is slower than return via sysret, but won't cause the
shadow stack violation.
Link: https://lore.kernel.org/all/20240611112158.40795-4-jolsa@kernel.org/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Wiring up uretprobe system call, which comes in following changes.
We need to do the wiring before, because the uretprobe implementation
needs the syscall number.
Note at the moment uretprobe syscall is supported only for native
64-bit process.
Link: https://lore.kernel.org/all/20240611112158.40795-3-jolsa@kernel.org/
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add the description to the parameters addr and free_filters
of the function unregister_ftrace_direct().
Link: https://lore.kernel.org/linux-trace-kernel/20240606132520.1397567-1-marilene.agarcia@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Marilene A Garcia <marilene.agarcia@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Yang Li sent a patch to fix the kerneldoc of ftrace_graph_ret_addr().
While reviewing it, I realized that the comments in the entire function
header needed a rewrite. When doing that, I realized that @idx parameter
was being ignored. Every time this was called by the unwinder, it would
start the loop at the top of the shadow stack and look for the matching
stack pointer. When it found it, it would return it. When the unwinder
asked for the next function, it would search from the beginning again.
In reality, it should start from where it left off. That was the reason
for the @idx parameter in the first place. The first time the unwinder
calls this function, the @idx pointer would contain zero. That would mean
to start from the top of the stack. The function was supposed to update
the @idx with the index where it found the return address, so that the
next time the unwinder calls this function it doesn't have to search
through the previous addresses it found (making it O(n^2)!).
This speeds up the unwinder's use of ftrace_graph_ret_addr() by an order
of magnitude.
Link: https://lore.kernel.org/linux-trace-kernel/20240610181746.656e3759@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240611031737.821995106@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Reported-by: Yang Li <yang.lee@linux.alibaba.com>
Fixes: 7aa1eaef9f ("function_graph: Allow multiple users to attach to function graph")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make the code more obvious and add proper comments to avoid future head
scratching.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240610124406.548322963@linutronix.de
The second part of
if (v <= 0 || (v + 1) < 0)
is not immediately obvious that it acts as overflow protection.
Check explicitely for v == INT_MAX instead and add a proper comment how
this is used at the call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240610124406.484973160@linutronix.de
The commit which tried to fix the concurrency issues of concurrent
static_key_slow_inc() failed to fix the equivalent issues
vs. static_key_slow_dec():
CPU0 CPU1
static_key_slow_dec()
static_key_slow_try_dec()
key->enabled == 1
val = atomic_fetch_add_unless(&key->enabled, -1, 1);
if (val == 1)
return false;
jump_label_lock();
if (atomic_dec_and_test(&key->enabled)) {
--> key->enabled == 0
__jump_label_update()
static_key_slow_dec()
static_key_slow_try_dec()
key->enabled == 0
val = atomic_fetch_add_unless(&key->enabled, -1, 1);
--> key->enabled == -1 <- FAIL
There is another bug in that code, when there is a concurrent
static_key_slow_inc() which enables the key as that sets key->enabled to -1
so on the other CPU
val = atomic_fetch_add_unless(&key->enabled, -1, 1);
will succeed and decrement to -2, which is invalid.
Cure all of this by replacing the atomic_fetch_add_unless() with a
atomic_try_cmpxchg() loop similar to static_key_fast_inc_not_disabled().
[peterz: add WARN_ON_ONCE for the -1 race]
Fixes: 4c5ea0a9cd ("locking/static_key: Fix concurrent static_key_slow_inc()")
Reported-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: Xingwei Lee <xrivendell7@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240610124406.422897838@linutronix.de
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmIsRAAKCRDbK58LschI
g4SSAP0bkl6rPMn7zp1h+/l7hlvpp2aVOmasBTe8hIhAGUbluwD/TGq4sNsGgXFI
i4tUtFRhw8pOjy2guy6526qyJvBs8wY=
=WMhY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_DYNAMIC_FTRACE is not set, the function
fgraph_update_pid_func() doesn't do anything. Currently, most of its logic
is within a "#ifdef CONFIG_DYNAMIC_FTRACE" block, but its variables were
declared outside that, and when DYNAMIC_FTRACE is not set, it produces
unused variable warnings.
Instead, just place it (and the helper function fgraph_pid_func()) within
the #ifdef block and have the header file use a empty stub function for
when DYNAMIC_FTRACE is not defined.
Link: https://lore.kernel.org/linux-trace-kernel/20240607094833.6a787d73@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406071806.BRjaC5FF-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since SLOB was removed, it is not necessary to use call_rcu
when the callback only performs kmem_cache_free. Use
kfree_rcu() directly.
The changes were done using the following Coccinelle semantic patch.
This semantic patch is designed to ignore cases where the callback
function is used in another way.
// <smpl>
@r@
expression e;
local idexpression e2;
identifier cb,f;
position p;
@@
(
call_rcu(...,e2)
|
call_rcu(&e->f,cb@p)
)
@r1@
type T;
identifier x,r.cb;
@@
cb(...) {
(
kmem_cache_free(...);
|
T x = ...;
kmem_cache_free(...,x);
|
T x;
x = ...;
kmem_cache_free(...,x);
)
}
@s depends on r1@
position p != r.p;
identifier r.cb;
@@
cb@p
@script:ocaml@
cb << r.cb;
p << s.p;
@@
Printf.eprintf "Other use of %s at %s:%d\n"
cb (List.hd p).file (List.hd p).line
@depends on r1 && !s@
expression e;
identifier r.cb,f;
position r.p;
@@
- call_rcu(&e->f,cb@p)
+ kfree_rcu(e,f)
@r1a depends on !s@
type T;
identifier x,r.cb;
@@
- cb(...) {
(
- kmem_cache_free(...);
|
- T x = ...;
- kmem_cache_free(...,x);
|
- T x;
- x = ...;
- kmem_cache_free(...,x);
)
- }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
After the recent commit 5097cbcb38 ("sched/isolation: Prevent boot crash
when the boot CPU is nohz_full") the kernel no longer crashes, but there is
another problem.
In this case tick_setup_device() calls tick_take_do_timer_from_boot() to
update tick_do_timer_cpu and this triggers the WARN_ON_ONCE(irqs_disabled)
in smp_call_function_single().
Kill tick_take_do_timer_from_boot() and just use WRITE_ONCE(), the new
comment explains why this is safe (thanks Thomas!).
Fixes: 08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240528122019.GA28794@redhat.com
Link: https://lore.kernel.org/all/20240522151742.GA10400@redhat.com
that can result in missed wakeups and hung tasks.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uVD+
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
wq->flags would not change, so it's not necessary to check if WQ_BH
is set in loop for_each_possible_cpu(), move define and set of pools
out of loop to simpliy the code.
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The function_graph selftests checks various size variables to pass from
the entry of the function to the exit. It tests 1, 2, 4 and 8 byte words.
The 1 byte macro was called BYTE_NUMBER but that is used in the sh
architecture: arch/sh/include/asm/bitops-op32.h
Just rename the macro to CHAR_NUMBER.
Link: https://lore.kernel.org/linux-trace-kernel/20240606081846.4cb82dc4@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 47c3c70aa3 ("function_graph: Add selftest for passing local variables")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406061744.rZDXfRrG-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
These functions are defined in the fgraph.c file, but not
called elsewhere, so delete these unused functions.
kernel/trace/fgraph.c:273:1: warning: unused function 'set_bitmap_bits'.
kernel/trace/fgraph.c:259:19: warning: unused function 'get_fgraph_type'.
Link: https://lore.kernel.org/linux-trace-kernel/20240606021053.27783-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9289
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On setting set_ftrace_pid, a extra entry generated by ftrace_pid_func()
is shown on stack trace(CONFIG_UNWINDER_FRAME_POINTER=y).
[004] ..... 68.459382: <stack trace>
=> 0xffffffffa00090af
=> ksys_read
=> __x64_sys_read
=> x64_sys_call
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
To resolve this issue, increment skip count
in function_stack_trace_call() if pids are set.
Link: https://lore.kernel.org/linux-trace-kernel/20240528032604.6813-3-tatsuya.s2862@gmail.com
Signed-off-by: Tatsuya S <tatsuya.s2862@gmail.com>
[ Rebased to current tree ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace subops is only defined if CONFIG_DYNAMIC_FTRACE is enabled. If
it is not, function tracing is extremely limited, and the subops in the
ftrace_ops structure is not defined (and will fail to compile). If
DYNAMIC_FTRACE is not enabled, then function graph filtering will not
work (as it shouldn't).
Link: https://lore.kernel.org/linux-trace-kernel/20240605202709.096020676@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051855.9VIYXbTB-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The static branch key "fgraph_do_direct" was not declared static but is
only used in one file. Change it to a static variable.
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.936515302@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051711.dS1sQZ9n-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_startup_subops() was in the wrong header, and both functions
were not defined on !CONFIG_DYNAMIC_FTRACE.
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.773583114@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406051524.a12JqLqx-lkp@intel.com/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use rcu_assign_ptr() to assign the list pointer as it is marked as RCU,
and this quiets the sparse warning:
kernel/trace/ftrace.c:313:23: warning: incorrect type in assignment (different address spaces)
kernel/trace/ftrace.c:313:23: expected struct ftrace_ops [noderef] __rcu *
kernel/trace/ftrace.c:313:23: got struct ftrace_ops *
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.613471310@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use a type cast to convert ftrace_list_end to RCU when assigning
ftrace_ops_list. This will quiet the sparse warning:
kernel/trace/ftrace.c:125:59: warning: incorrect type in initializer (different address spaces)
kernel/trace/ftrace.c:125:59: expected struct ftrace_ops [noderef] __rcu *[addressable] [toplevel] ftrace_ops_list
kernel/trace/ftrace.c:125:59: got struct ftrace_ops *
Link: https://lore.kernel.org/linux-trace-kernel/20240605202708.450784356@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Describe what ftrace_hash_move() does and add some more comments to some
other functions to make it easier to understand.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180409.179520305@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The parameter "inc" in the function ftrace_hash_rec_update_modify() is
boolean. Change it to be such.
Also add documentation to what the function does.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180409.021080462@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add comments to describe what the functions ftrace_hash_rec_disable() and
ftrace_hash_rec_enable() do. Also change the passing of the "inc" variable
to __ftrace_hash_rec_update() to a boolean value as that is what it is
supposed to take.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.857333430@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While adding comments to the function __ftrace_hash_rec_update() and
trying to describe in detail what the parameter for "filter_hash" does, I
realized that it basically does exactly the same thing (but differently)
if it is set or not!
If it is set, the idea was the ops->filter_hash was being updated, and the
code should focus on the functions that are in the ops->filter_hash and
add them. But it still had to pay attention to the functions in the
ops->notrace_hash, to ignore them.
If it was cleared, it focused on the ops->notrace_hash, and would add
functions that were not in the ops->notrace_hash but would still keep
functions in the "ops->filter_hash". Basically doing the same thing.
In reality, the __ftrace_hash_rec_update() only needs to either remove the
functions associated to the give ops (if "inc" is set) or remove them (if
"inc" is cleared). It has to pay attention to both the filter_hash and
notrace_hash regardless.
Remove the "filter_hash" parameter from __filter_hash_rec_update() and
comment the function for what it really is doing.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.691995506@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When RCU-TASKS-TRACE pre-gp takes a snapshot of the current task running
on all online CPUs, no explicit ordering synchronizes properly with a
context switch. This lack of ordering can permit the new task to miss
pre-grace-period update-side accesses. The following diagram, courtesy
of Paul, shows the possible bad scenario:
CPU 0 CPU 1
----- -----
// Pre-GP update side access
WRITE_ONCE(*X, 1);
smp_mb();
r0 = rq->curr;
RCU_INIT_POINTER(rq->curr, TASK_B)
spin_unlock(rq)
rcu_read_lock_trace()
r1 = X;
/* ignore TASK_B */
Either r0==TASK_B or r1==1 is needed but neither is guaranteed.
One possible solution to solve this is to wait for an RCU grace period
at the beginning of the RCU-tasks-trace grace period before taking the
current tasks snaphot. However this would introduce large additional
latencies to RCU-tasks-trace grace periods.
Another solution is to lock the target runqueue while taking the current
task snapshot. This ensures that the update side sees the latest context
switch and subsequent context switches will see the pre-grace-period
update side accesses.
This commit therefore adds runqueue locking to cpu_curr_snapshot().
Fixes: e386b67257 ("rcu-tasks: Eliminate RCU Tasks Trace IPIs to online CPUs")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Fix the following 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/rcu/rcutorture.o
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/rcu/rcuscale.o
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/rcu/refscale.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On powerpc systems, spinlock acquisition does not order prior stores
against later loads. This means that this statement:
rfcp->rfc_next = NULL;
Can be reordered to follow this statement:
WRITE_ONCE(*rfcpp, rfcp);
Which is then a data race with rcu_torture_fwd_prog_cr(), specifically,
this statement:
rfcpn = READ_ONCE(rfcp->rfc_next)
KCSAN located this data race, which represents a real failure on powerpc.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <kasan-dev@googlegroups.com>
Fix the warning reported by 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/kcsan/kcsan_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
and drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the same
UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the old
behavior for two cases where we started coalescing those messages with
normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting
to 6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mwEJ
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
The name "dup_hash()" is a misnomer as it does not duplicate the hash that
is passed in, but instead moves its entities from that hash to a newly
allocated one. Rename it to "__move_hash()" (using starting underscores as
it is an internal function), and add some comments about what it does.
Link: https://lore.kernel.org/linux-trace-kernel/20240605180408.537723591@goodmis.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
make C=1 reports:
kernel/trace/pid_list.c:458: warning: Function parameter or struct member 'pid_list' not described in 'trace_pid_list_free'
Add the missing parameter to the trace_pid_list_free() kernel-doc.
Link: https://lore.kernel.org/linux-trace-kernel/20240506-trace_pid_list_free-kdoc-v1-1-c70f0ae29144@quicinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The update to the ops trampoline done by the function
ftrace_update_trampoline() was accidentally removed from
ftrace_update_pid_func(). Add it back.
Link: https://lore.kernel.org/linux-trace-kernel/20240605205337.6115e9a5@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During compilation, several warning of the following form were raised:
Function parameter or struct member 'x' not described in 'yyy'
Add the missing function parameter descriptions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240527161450.326615-10-herve.codina@bootlin.com
We observed that the overhead on trigger_load_balance(), now renamed
sched_balance_trigger(), has risen with a system's core counts.
For an OLTP workload running 6.8 kernel on a 2 socket x86 systems
having 96 cores/socket, we saw that 0.7% cpu cycles are spent in
trigger_load_balance(). On older systems with fewer cores/socket, this
function's overhead was less than 0.1%.
The cause of this overhead was that there are multiple cpus calling
kick_ilb(flags), updating the balancing work needed to a common idle
load balancer cpu. The ilb_cpu's flags field got updated unconditionally
with atomic_fetch_or(). The atomic read and writes to ilb_cpu's flags
causes much cache bouncing and cpu cycles overhead. This is seen in the
annotated profile below.
kick_ilb():
if (ilb_cpu < 0)
test %r14d,%r14d
↑ js 6c
flags = atomic_fetch_or(flags, nohz_flags(ilb_cpu));
mov $0x2d600,%rdi
movslq %r14d,%r8
mov %rdi,%rdx
add -0x7dd0c3e0(,%r8,8),%rdx
arch_atomic_read():
0.01 mov 0x64(%rdx),%esi
35.58 add $0x64,%rdx
arch_atomic_fetch_or():
static __always_inline int arch_atomic_fetch_or(int i, atomic_t *v)
{
int val = arch_atomic_read(v);
do { } while (!arch_atomic_try_cmpxchg(v, &val, val | i));
0.03 157: mov %r12d,%ecx
arch_atomic_try_cmpxchg():
return arch_try_cmpxchg(&v->counter, old, new);
0.00 mov %esi,%eax
arch_atomic_fetch_or():
do { } while (!arch_atomic_try_cmpxchg(v, &val, val | i));
or %esi,%ecx
arch_atomic_try_cmpxchg():
return arch_try_cmpxchg(&v->counter, old, new);
0.01 lock cmpxchg %ecx,(%rdx)
42.96 ↓ jne 2d2
kick_ilb():
With instrumentation, we found that 81% of the updates do not result in
any change in the ilb_cpu's flags. That is, multiple cpus are asking
the ilb_cpu to do the same things over and over again, before the ilb_cpu
has a chance to run NOHZ load balance.
Skip updates to ilb_cpu's flags if no new work needs to be done.
Such updates do not change ilb_cpu's NOHZ flags. This requires an extra
atomic read but it is less expensive than frequent unnecessary atomic
updates that generate cache bounces.
We saw that on the OLTP workload, cpu cycles from trigger_load_balance()
(or sched_balance_trigger()) got reduced from 0.7% to 0.2%.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240531205452.65781-1-tim.c.chen@linux.intel.com
The call of rcu_idle_enter() from within cpuidle_idle_call() was
removed in commit 1098582a0f ("sched,idle,rcu: Push rcu_idle deeper
into the idle path") which makes the comment out of place.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/5b936388-47df-4050-9229-6617a6c2bba5@arm.com
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a6 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
There's a random number of structure pre-declaration lines in
kernel/sched/sched.h, some of which are unnecessary duplicates.
Move them to the head & order them a bit for readability.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Remove unnecessary use of the address operator.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
In most cases function graph is used by a single user. Instead of calling
a loop to call function graph callbacks in this case, call the function
return callback directly.
Use the static_key that is set when the function graph tracer has less
than 2 callbacks registered. It will do the direct call in that case, and
will do the loop over all callers when there are 2 or more callbacks
registered.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.921460797@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In most cases function graph is used by a single user. Instead of calling
a loop to call function graph callbacks in this case, call the function
entry callback directly.
Add a static_key that will be used to set the function graph logic to
either do the loop (when more than one callback is registered) or to call
the callback directly if there is only one registered callback.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.766858241@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of looping through all the elements of fgraph_array[] to see if
there's an gops attached to one and then calling its gops->func(). Create
a fgraph_array_bitmask that sets bits when an index in the array is
reserved (via the simple lru algorithm). Then only the bits set in this
bitmask needs to be looked at where only elements in the array that have
ops registered need to be looked at.
Note, we do not care about races. If a bit is set before the gops is
assigned, it only wastes time looking at the element and ignoring it (as
it did before this bitmask is added).
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.604448781@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of iterating through the entire fgraph_array[] and seeing if one
of the bitmap bits are set to know to call the array's retfunc() function,
use for_each_set_bit() on the bitmap itself. This will only iterate for
the number of set bits.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.447448026@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a selftest for multiple function graph tracer with storage on a same
function. In this case, the shadow stack entry will be shared among those
fgraph with different data storage. So this will ensure the fgraph will
not mixed those storage data.
Link: https://lore.kernel.org/linux-trace-kernel/171509111465.162236.3795819216426570800.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.284049716@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add boot up selftest that passes variables from a function entry to a
function exit, and make sure that they do get passed around.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509110271.162236.11047551496319744627.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190824.122952310@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Added functions that can be called by a fgraph_ops entryfunc and retfunc to
store state between the entry of the function being traced to the exit of
the same function. The fgraph_ops entryfunc() may call
fgraph_reserve_data() to store up to 32 words onto the task's shadow
ret_stack and this then can be retrieved by fgraph_retrieve_data() called
by the corresponding retfunc().
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509109089.162236.11372474169781184034.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.959703050@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the function
graph no-trace was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use
that instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509107907.162236.6564679266777519065.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.796709456@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the function
graph depth was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509106728.162236.2398372644430125344.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.634870264@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The use of the task->trace_recursion for the logic used for the
set_graph_function was a bit of an abuse of that variable. Now that there
exists global vars that are per stack for registered graph traces, use that
instead.
Link: https://lore.kernel.org/linux-trace-kernel/171509105520.162236.10339831553995971290.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.472955399@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a "task variables" array on the tasks shadow ret_stack that is the
size of longs for each possible registered fgraph_ops. That's a total
of 16, taking up 8 * 16 = 128 bytes (out of a page size 4k).
This will allow for fgraph_ops to do specific features on a per task basis
having a way to maintain state for each task.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509104383.162236.12239656156685718550.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.308806126@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the fgraph_array index is used for the bitmap on the shadow
stack, it may leave some entries after a function_graph instance is
removed. Thus if another instance reuses the fgraph_array index soon
after releasing it, the fgraph may confuse to call the newer callback
for the entries which are pushed by the older instance.
To avoid reusing the fgraph_array index soon after releasing, introduce
a simple LRU table for managing the index number. This will reduce the
possibility of this confusion.
Link: https://lore.kernel.org/linux-trace-kernel/171509103267.162236.6885097397289135378.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190823.147421545@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that the function_graph has a main callback that handles the function
graph subops tracing, it no longer honors the pid filtering of ftrace. Add
back this logic in the function_graph code to update the gops callback for
the entry function to test if it should trace the current task or not.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.991720703@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow for instances to have their own ftrace_ops part of the fgraph_ops
that makes the funtion_graph tracer filter on the set_ftrace_filter file
of the instance and not the top instance.
This uses the new ftrace_startup_subops(), by using graph_ops as the
"manager ops" that defines the callback function and adds the functions
defined by the filters of the ops for each trace instance. The callback
defined by the manager ops will call the registered fgraph ops that were
added to the fgraph_array.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509102088.162236.15758883237657317789.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.832946261@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The subops filters use a "manager" ops to enable and disable its filters.
The manager ops can handle more than one subops, and its filter is what
controls what functions get set. Add a ftrace_hash_move_and_update_subops()
function that will update the manager ops when the subops filters change.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.673932251@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are cases where a single system will use a single function callback
to handle multiple users. For example, to allow function_graph tracer to
have multiple users where each can trace their own set of functions, it is
useful to only have one ftrace_ops registered to ftrace that will call a
function by the function_graph tracer to handle the multiplexing with the
different registered function_graph tracers.
Add a "subop_list" to the ftrace_ops that will hold a list of other
ftrace_ops that the top ftrace_ops will manage.
The function ftrace_startup_subops() that takes the manager ftrace_ops and
a subop ftrace_ops it will manage. If there are no subops with the
ftrace_ops yet, it will copy the ftrace_ops subop filters to the manager
ftrace_ops and register that with ftrace_startup(), and adds the subop to
its subop_list. If the manager ops already has something registered, it
will then merge the new subop filters with what it has and enable the new
functions that covers all the subops it has.
To remove a subop, ftrace_shutdown_subops() is called which will use the
subop_list of the manager ops to rebuild all the functions it needs to
trace, and update the ftrace records to only call the functions it now has
registered. If there are no more functions registered, it will then call
ftrace_shutdown() to disable itself completely.
Note, it is up to the manager ops callback to always make sure that the
subops callbacks are called if its filter matches, as there are times in
the update where the callback could be calling more functions than those
that are currently registered.
This could be updated to handle other systems other than function_graph,
for example, fprobes could use this (but will need an interface to call
ftrace_startup_subops()).
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.508431129@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now that function graph tracing can handle more than one user, allow it to
be enabled in the ftrace instances. Note, the filtering of the functions is
still joined by the top level set_ftrace_filter and friends, as well as the
graph and nograph files.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509099743.162236.1699959255446248163.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.190630762@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pass the fgraph_ops structure to the function graph callbacks. This will
allow callbacks to add a descriptor to a fgraph_ops private field that wil
be added in the future and use it for the callbacks. This will be useful
when more than one callback can be registered to the function graph tracer.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509098588.162236.4787930115997357578.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190822.035147698@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function pointers ftrace_graph_entry and ftrace_graph_return are no
longer called via the function_graph tracer. Instead, an array structure is
now used that will allow for multiple users of the function_graph
infrastructure. The variables are still used by the architecture code for
non dynamic ftrace configs, where a test is made against them to see if
they point to the default stub function or not. This is how the static
function tracing knows to call into the function graph tracer
infrastructure or not.
Two new stub functions are made. entry_run() and return_run(). The
ftrace_graph_entry and ftrace_graph_return are set to them respectively
when the function graph tracer is enabled, and this will trigger the
architecture specific function graph code to be executed.
This also requires checking the global_ops hash for all calls into the
function_graph tracer.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509097408.162236.17387844142114638932.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.872127216@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For the tail-call, there would be 2 or more ftrace_ret_stacks on the
ret_stack, which records "return_to_handler" as the return address except
for the last one. But on the real stack, there should be 1 entry because
tail-call reuses the return address on the stack and jump to the next
function.
In ftrace_graph_ret_addr() that is used for stack unwinding, skip tail
calls as a real stack unwinder would do.
Link: https://lore.kernel.org/linux-trace-kernel/171509096221.162236.8806372072523195752.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.717065217@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow for multiple users to attach to function graph tracer at the same
time. Only 16 simultaneous users can attach to the tracer. This is because
there's an array that stores the pointers to the attached fgraph_ops. When
a function being traced is entered, each of the ftrace_ops entryfunc is
called and if it returns non zero, its index into the array will be added
to the shadow stack.
On exit of the function being traced, the shadow stack will contain the
indexes of the ftrace_ops on the array that want their retfunc to be
called.
Because a function may sleep for a long time (if a task sleeps itself),
the return of the function may be literally days later. If the ftrace_ops
is removed, its place on the array is replaced with a ftrace_ops that
contains the stub functions and that will be called when the function
finally returns.
If another ftrace_ops is added that happens to get the same index into the
array, its return function may be called. But that's actually the way
things current work with the old function graph tracer. If one tracer is
removed and another is added, the new one will get the return calls of the
function traced by the previous one, thus this is not a regression. This
can be fixed by adding a counter to each time the array item is updated and
save that on the shadow stack as well, such that it won't be called if the
index saved does not match the index on the array.
Note, being able to filter functions when both are called is not completely
handled yet, but that shouldn't be too hard to manage.
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509096221.162236.8806372072523195752.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.555493396@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add an array structure that will eventually allow the function graph tracer
to have up to 16 simultaneous callbacks attached. It's an array of 16
fgraph_ops pointers, that is assigned when one is registered. On entry of a
function the entry of the first item in the array is called, and if it
returns zero, then the callback returns non zero if it wants the return
callback to be called on exit of the function.
The array will simplify the process of having more than one callback
attached to the same function, as its index into the array can be stored on
the shadow stack. We need to only save the index, because this will allow
the fgraph_ops to be freed before the function returns (which may happen if
the function call schedule for a long time).
Co-developed with Masami Hiramatsu:
Link: https://lore.kernel.org/linux-trace-kernel/171509095075.162236.8272148192748284581.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.392113213@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to make it possible to have multiple callbacks registered with the
function_graph tracer, the retstack needs to be converted from an array of
ftrace_ret_stack structures to an array of longs. This will allow to store
the list of callbacks on the stack for the return side of the functions.
Link: https://lore.kernel.org/linux-trace-kernel/171509092742.162236.4427737821399314856.stgit@devnote2
Link: https://lore.kernel.org/linux-trace-kernel/20240603190821.073111754@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Limit the number of levels looking into struct types to avoid running out
of stack space.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-7-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier has field information for specific special types, such as
kptr, rbtree root, and list head. These types are handled
differently. However, we did not previously examine the types of fields of
a struct type variable. Field information records were not generated for
the kptrs, rbtree roots, and linked_list heads that are not located at the
outermost struct type of a variable.
For example,
struct A {
struct task_struct __kptr * task;
};
struct B {
struct A mem_a;
}
struct B var_b;
It did not examine "struct A" so as not to generate field information for
the kptr in "struct A" for "var_b".
This patch enables BPF programs to define fields of these special types in
a struct type other than the direct type of a variable or in a struct type
that is the type of a field in the value type of a map.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-6-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier uses field information for certain special types, such as
kptr, rbtree root, and list head. These types are treated
differently. However, we did not previously support these types in
arrays. This update examines arrays and duplicates field information the
same number of times as the length of the array if the element type is one
of the special types.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-5-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move common code of the two functions to btf_find_field_one().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-4-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
field->size has been initialized by bpf_parse_fields() with the value
returned by btf_field_type_size(). Use it instead of calling
btf_field_type_size() again.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-3-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reg_find_field_offset() always return a btf_field with a matching offset
value. Checking the offset of the returned btf_field is unnecessary.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-2-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit allows rcutorture to test double-call_srcu() when the
CONFIG_DEBUG_OBJECTS_RCU_HEAD Kconfig option is enabled. The non-raw
sdp structure's ->spinlock will be acquired in call_srcu(), hence this
commit also removes the current IRQ and preemption disabling so as to
avoid lockdep complaints.
Link: https://lore.kernel.org/all/20240407112714.24460-1-qiang.zhang1211@gmail.com/
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This reverts commit 28319d6dc5. The race
it fixed was subject to conditions that don't exist anymore since:
1612160b91 ("rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks")
This latter commit removes the use of SRCU that used to cover the
RCU-tasks blind spot on exit between the tasklist's removal and the
final preemption disabling. The task is now placed instead into a
temporary list inside which voluntary sleeps are accounted as RCU-tasks
quiescent states. This would disarm the deadlock initially reported
against PID namespace exit.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The bypass lock contention mitigation assumes there can be at most
2 contenders on the bypass lock, following this scheme:
1) One kthread takes the bypass lock
2) Another one spins on it and increment the contended counter
3) A third one (a bypass enqueuer) sees the contended counter on and
busy loops waiting on it to decrement.
However this assumption is wrong. There can be only one CPU to find the
lock contended because call_rcu() (the bypass enqueuer) is the only
bypass lock acquire site that may not already hold the NOCB lock
beforehand, all the other sites must first contend on the NOCB lock.
Therefore step 2) is impossible.
The other problem is that the mitigation assumes that contenders all
belong to the same rdp CPU, which is also impossible for a raw spinlock.
In theory the warning could trigger if the enqueuer holds the bypass
lock and another CPU flushes the bypass queue concurrently but this is
prevented from all flush users:
1) NOCB kthreads only flush if they successfully _tried_ to lock the
bypass lock. So no contention management here.
2) Flush on callbacks migration happen remotely when the CPU is offline.
No concurrency against bypass enqueue.
3) Flush on deoffloading happen either locally with IRQs disabled or
remotely when the CPU is not yet online. No concurrency against
bypass enqueue.
4) Flush on barrier entrain happen either locally with IRQs disabled or
remotely when the CPU is offline. No concurrency against
bypass enqueue.
For those reasons, the bypass lock contention mitigation isn't needed
and is even wrong. Remove it but keep the warning reporting a contended
bypass lock on a remote CPU, to keep unexpected contention awareness.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Upon NOCB deoffloading, the rcuo kthread must be forced to sleep
until the corresponding rdp is ever offloaded again. The deoffloader
clears the SEGCBLIST_OFFLOADED flag, wakes up the rcuo kthread which
then notices that change and clears in turn its SEGCBLIST_KTHREAD_CB
flag before going to sleep, until it ever sees the SEGCBLIST_OFFLOADED
flag again, should a re-offloading happen.
Upon NOCB offloading, the rcuo kthread must be forced to wake up and
handle callbacks until the corresponding rdp is ever deoffloaded again.
The offloader sets the SEGCBLIST_OFFLOADED flag, wakes up the rcuo
kthread which then notices that change and sets in turn its
SEGCBLIST_KTHREAD_CB flag before going to check callbacks, until it
ever sees the SEGCBLIST_OFFLOADED flag cleared again, should a
de-offloading happen again.
This is all a crude ad-hoc and error-prone kthread (un-)parking
re-implementation.
Consolidate the behaviour with the appropriate API instead.
[ paulmck: Apply Qiang Zhang feedback provided in Link: below. ]
Link: https://lore.kernel.org/all/20240509074046.15629-1-qiang.zhang1211@gmail.com/
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If only isolated partitions are being created underneath the cgroup root,
there will only be one sched domain with top_cpuset.effective_cpus. We can
skip the unnecessary sched domains scanning code and save some cycles.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After commit 1a80dbcb2d, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation.
Fixes: 1a80dbcb2d ("bpf: support deferring bpf_link dealloc to after RCU grace period")
Reported-by: syzbot+1989ee16d94720836244@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240602182703.207276-1-xiyou.wangcong@gmail.com
Rename console_replay_all() to console_try_replay_all() to make
clear that the implementation is best effort. Also, the function
should not be called in NMI context as it takes locks, so update
the comment in code.
Fixes: 693f75b91a ("printk: Add function to replay kernel log on consoles")
Fixes: 1b743485e2 ("tty/sysrq: Replay kernel log messages on consoles via sysrq")
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shimoyashiki Taichi <taichi.shimoyashiki@sony.com>
Signed-off-by: Sreenath Vijayan <sreenath.vijayan@sony.com>
Link: https://lore.kernel.org/r/Zlguq/wU21Z8MqI4@sreenath.vijayan@sony.com
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
The iterator variable dst cannot be NULL and the if check can be removed.
Remove it and fix the following Coccinelle/coccicheck warning reported
by itnull.cocci:
ERROR: iterator variable bound on line 762 cannot be NULL
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240529101900.103913-2-thorsten.blum@toblux.com
Back in 2021 we already discussed removing deny_write_access() for
executables. Back then I was hesistant because I thought that this might
cause issues in userspace. But even back then I had started taking some
notes on what could potentially depend on this and I didn't come up with
a lot so I've changed my mind and I would like to try this.
Here are some of the notes that I took:
(1) The deny_write_access() mechanism is causing really pointless issues
such as [1]. If a thread in a thread-group opens a file writable,
then writes some stuff, then closing the file descriptor and then
calling execve() they can fail the execve() with ETXTBUSY because
another thread in the thread-group could have concurrently called
fork(). Multi-threaded libraries such as go suffer from this.
(2) There are userspace attacks that rely on overwriting the binary of a
running process. These attacks are _mitigated_ but _not at all
prevented_ from ocurring by the deny_write_access() mechanism.
I'll go over some details. The clearest example of such attacks was
the attack against runC in CVE-2019-5736 (cf. [3]).
An attack could compromise the runC host binary from inside a
_privileged_ runC container. The malicious binary could then be used
to take over the host.
(It is crucial to note that this attack is _not_ possible with
unprivileged containers. IOW, the setup here is already insecure.)
The attack can be made when attaching to a running container or when
starting a container running a specially crafted image. For example,
when runC attaches to a container the attacker can trick it into
executing itself.
This could be done by replacing the target binary inside the
container with a custom binary pointing back at the runC binary
itself. As an example, if the target binary was /bin/bash, this
could be replaced with an executable script specifying the
interpreter path #!/proc/self/exe.
As such when /bin/bash is executed inside the container, instead the
target of /proc/self/exe will be executed. That magic link will
point to the runc binary on the host. The attacker can then proceed
to write to the target of /proc/self/exe to try and overwrite the
runC binary on the host.
However, this will not succeed because of deny_write_access(). Now,
one might think that this would prevent the attack but it doesn't.
To overcome this, the attacker has multiple ways:
* Open a file descriptor to /proc/self/exe using the O_PATH flag and
then proceed to reopen the binary as O_WRONLY through
/proc/self/fd/<nr> and try to write to it in a busy loop from a
separate process. Ultimately it will succeed when the runC binary
exits. After this the runC binary is compromised and can be used
to attack other containers or the host itself.
* Use a malicious shared library annotating a function in there with
the constructor attribute making the malicious function run as an
initializor. The malicious library will then open /proc/self/exe
for creating a new entry under /proc/self/fd/<nr>. It'll then call
exec to a) force runC to exit and b) hand the file descriptor off
to a program that then reopens /proc/self/fd/<nr> for writing
(which is now possible because runC has exited) and overwriting
that binary.
To sum up: the deny_write_access() mechanism doesn't prevent such
attacks in insecure setups. It just makes them minimally harder.
That's all.
The only way back then to prevent this is to create a temporary copy
of the calling binary itself when it starts or attaches to
containers. So what I did back then for LXC (and Aleksa for runC)
was to create an anonymous, in-memory file using the memfd_create()
system call and to copy itself into the temporary in-memory file,
which is then sealed to prevent further modifications. This sealed,
in-memory file copy is then executed instead of the original on-disk
binary.
Any compromising write operations from a privileged container to the
host binary will then write to the temporary in-memory binary and
not to the host binary on-disk, preserving the integrity of the host
binary. Also as the temporary, in-memory binary is sealed, writes to
this will also fail.
The point is that deny_write_access() is uselss to prevent these
attacks.
(3) Denying write access to an inode because it's currently used in an
exec path could easily be done on an LSM level. It might need an
additional hook but that should be about it.
(4) The MAP_DENYWRITE flag for mmap() has been deprecated a long time
ago so while we do protect the main executable the bigger portion of
the things you'd think need protecting such as the shared libraries
aren't. IOW, we let anyone happily overwrite shared libraries.
(5) We removed all remaining uses of VM_DENYWRITE in [2]. That means:
(5.1) We removed the legacy uselib() protection for preventing
overwriting of shared libraries. Nobody cared in 3 years.
(5.2) We allow write access to the elf interpreter after exec
completed treating it on a par with shared libraries.
Yes, someone in userspace could potentially be relying on this. It's not
completely out of the realm of possibility but let's find out if that's
actually the case and not guess.
Link: https://github.com/golang/go/issues/22315 [1]
Link: 49624efa65 ("Merge tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux") [2]
Link: https://unit42.paloaltonetworks.com/breaking-docker-via-runc-explaining-cve-2019-5736 [3]
Link: https://lwn.net/Articles/866493
Link: https://github.com/golang/go/issues/22220
Link: 5bf8c0cf09/src/cmd/go/internal/work/buildid.go (L724)
Link: 5bf8c0cf09/src/cmd/go/internal/work/exec.go (L1493)
Link: 5bf8c0cf09/src/cmd/go/internal/script/cmds.go (L457)
Link: 5bf8c0cf09/src/cmd/go/internal/test/test.go (L1557)
Link: 5bf8c0cf09/src/os/exec/lp_linux_test.go (L61)
Link: https://github.com/buildkite/agent/pull/2736
Link: https://github.com/rust-lang/rust/issues/114554
Link: https://bugs.openjdk.org/browse/JDK-8068370
Link: https://github.com/dotnet/runtime/issues/58964
Link: https://lore.kernel.org/r/20240531-vfs-i_writecount-v1-1-a17bea7ee36b@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Added a module description to sysctl Kunit self test module to fix the
'make W=1' warning (" WARNING: modpost: missing MODULE_DESCRIPTION() in
kernel/sysctl-test.o")
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
In a future commit the proc_handlers themselves will change to
"const struct ctl_table". As a preparation for that adapt the internal
helper.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The sysctl core is preparing to only expose instances of
struct ctl_table as "const".
This will also affect the ctl_table argument of sysctl handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Move boundary checking for proc_dou8ved_minmax into module loading, thereby
reporting errors in advance. And add a kunit test case ensuring the
boundary check is done correctly.
The boundary check in proc_dou8vec_minmax done to the extra elements in
the ctl_table struct is currently performed at runtime. This allows buggy
kernel modules to be loaded normally without any errors only to fail
when used.
This is a buggy example module:
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sysctl.h>
static struct ctl_table_header *_table_header = NULL;
static unsigned char _data = 0;
struct ctl_table table[] = {
{
.procname = "foo",
.data = &_data,
.maxlen = sizeof(u8),
.mode = 0644,
.proc_handler = proc_dou8vec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE_THOUSAND,
},
};
static int init_demo(void) {
_table_header = register_sysctl("kernel", table);
if (!_table_header)
return -ENOMEM;
return 0;
}
module_init(init_demo);
MODULE_LICENSE("GPL");
And this is the result:
# insmod test.ko
# cat /proc/sys/kernel/foo
cat: /proc/sys/kernel/foo: Invalid argument
Suggested-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Improve the readability of irqdomain debugging information in debugfs by
printing the flags field of domain files as human-readable strings instead
of a raw bitmask, which aligned with the existing style used for irqchip
flags in the irq debug files.
Before:
#cat :cpus:cpu@0:interrupt-controller
name: :cpus:cpu@0:interrupt-controller
size: 0
mapped: 2
flags: 0x00000003
After:
#cat :cpus:cpu@0:interrupt-controller
name: :cpus:cpu@0:interrupt-controller
size: 0
mapped: 3
flags: 0x00000003
IRQ_DOMAIN_FLAG_HIERARCHY
IRQ_DOMAIN_NAME_ALLOCATED
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240529091628.3666379-1-ruanjinjie@huawei.com
Interrupts which have no action and chained interrupts can be
ignored due to the following reasons (as per tglx's comment):
1) Interrupts which have no action are completely uninteresting as
there is no real information attached.
2) Chained interrupts do not have a count at all.
So there is no point to evaluate the number of accounted interrupts before
checking for non-requested or chained interrupts.
Remove the any_count logic and simply check whether the interrupt
descriptor has the kstat_irqs member populated.
[ tglx: Adapted to upstream changes ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiwei Sun <sunjw10@lenovo.com>
Link: https://lore.kernel.org/r/20240515100632.1419-1-ahuang12@lenovo.com
Link: https://lore.kernel.org/lkml/87h6f0knau.ffs@tglx/
PPS (Pulse Per Second) generates a hardware pulse every second based on
CLOCK_REALTIME. This works fine when the pulse is generated in software
from a hrtimer callback function.
For hardware which generates the pulse by programming a timer it is
required to convert CLOCK_REALTIME to the underlying hardware clock.
The X86 Timed IO device is based on the Always Running Timer (ART), which
is the base clock of the TSC, which is usually the system clocksource on
X86.
The core code already has functionality to convert base clock timestamps to
system clocksource timestamps, but there is no support for converting the
other way around.
Provide the required functionality to support such devices in a generic
way to avoid code duplication in drivers:
1) ktime_real_to_base_clock() to convert a CLOCK_REALTIME timestamp to a
base clock timestamp
2) timekeeping_clocksource_has_base() to allow drivers to validate that
the system clocksource is based on a particular clocksource ID.
[ tglx: Simplify timekeeping_clocksource_has_base() and add missing READ_ONCE() ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-10-lakshmi.sowjanya.d@intel.com
Hardware time stamps like provided by PTP clock implementations are based
on a clock which feeds both the PCIe device and the system clock. For
further processing the underlying hardwarre clock timestamp must be
converted to the system clock.
Right now this requires drivers to invoke an architecture specific
conversion function, e.g. to convert the ART (Always Running Timer)
timestamp to a TSC timestamp.
As the system clock is aware of the underlying base clock, this can be
moved to the core code by providing a base clock property for the system
clock which contains the conversion factors and assigning a clocksource ID
to the base clock.
Add the required data structures and the conversion infrastructure in the
core code to prepare for converting X86 and the related PTP drivers over.
[ tglx: Added a missing READ_ONCE(). Massaged change log ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-2-lakshmi.sowjanya.d@intel.com
